Document Details |
|||||||
Name of Department/Committee : | LITD 05 | ||||||
---|---|---|---|---|---|---|---|
Document Number : | LITD 05 ( 23258) | ||||||
Document Title [English] : | Thermistors Directly heated positive temperature coefficient Part 1 Generic specification | ||||||
Document Title [Hindi] : | थर्मिस्टर – प्रत्यक्ष तापित घनात्मक तापमान गुणांक – भाग 1 सामान्य विशिष्टि | ||||||
Document Type : | New | ||||||
Language : | English | ||||||
Priority : | 3 | ||||||
ICS Code : | ICS 31.040.30 | ||||||
Date of Project Approval : | 14-08-2023 | ||||||
Standards to be Superseded : |
|
Classification Details |
|
Group : | Electronic and Telecom equipments, components and devices |
Sub Group : | Electronic components and devices |
Sub Sub Group : | Semiconductor devices - Integrated circuits |
Aspects : | Product Specification |
Risk : | None |
Certification : | None |
Short Commom Man's Title : | |
ITCHS Code : | |
Ministry : |
|
Sustainable development Goals : |
|
Degree of Equivalence : | Identical under single numbering |
Identical/Equivalent Standards : | IEC 60738-1: 2022 |
Organization Type: | IEC |
::Cross Referenced Indian Standard:: |
|||
Sl. No. | Is No & Year | IS Title | |
1 | IS 3722 : Part 1: 2023 | LETTER SYMBOLS AND SIGNS USED IN ELECTRICAL TECHNOLOGY - PART 1: GENERAL (Second Revision) | |
2 | IS 1885 : Part 1: 1961 | Electrotechnical vocabulary: Part 1 fundamental definitions | |
3 | IS/IEC 60068 : Part 1: 2013 | Environmental Testing Part 1 General and Guidance | |
4 | IS/IEC 60068 : Part 2 : Sec 1: 2007 | Environmental Testing Part 2 Tests Section 1 Test A: Cold | |
5 | IS/IEC 60068 : Part 2 : Sec 2: 2007 | Environmental Testing Part 2: Tests - Test B Section 2: Dry Heat | |
6 | IS/IEC 60068 : Part 2 : Sec 6: 2007 | Environmental Testing Part 2 Tests Section 6 Test Fc: Vibration sinusoidal | |
7 | IS 9000 : Part 11: 1983 | Basic environmental testing procedures for electronic and electrical items: Part 11 salt mist test | |
8 | IS/IEC 60068 : Part 2 : Sec 13: 2021 | Environmental Testing Part 2 Tests Section 13 Test M: Low air pressure | |
9 | IS/IEC 60068 : Part 2 : Sec 14: 2009 | Environmental testing Part 2: Tests Section 14: Test N: Change of temperature | |
10 | IS/IEC 60068 : Part 2 : Sec 20: 2021 | Environmental testing Part 2 Tests Section 20 Tests Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads | |
11 | IS/IEC 60068 : Part 2 : Sec 30: 2005 | Environmental testing Part 2 Tests Section 30 Test Db: Damp heat cyclic 12 h 12 h cycle | |
12 | IS/IEC 60068 : Part 2 : Sec 58: 2015 | Environmental testing Part 2 Tests Section 58 Test Td: Test methods for solderability resistance to dissolution of metallization and to soldering heat of surface mounting devicesSMD | |
13 | IS 9000 : Part 4: 2020 | Environmental Testing Part 4 Tests - Test Cab: Damp Heat, Steady State ( Second Revision ) | |
14 | IS 13554: 2020 | Measurement of the Dimensions of a Cylindrical Component with Axial Terminations ( First Revision ) | |
15 | IS/IEC 60440 : 2012 | Method of measurement of non-linearity in resistors | |
16 | IS/IEC 60695 : Part 11 : Sec 5: 2016 | Fire Hazard Testing Part 11 Test Flames Section 5 Needle - Flame test method - Apparatus, confirmatory test arrangement and guidance ( First Revision ) | |
17 | IS/ISO 80000 : Part 1: 2022 | Quantities and Units Part 1 General |
Sl. No. | Document No | Document Title | |
1 | LITD/05 / 23249 | Environmental Testing Part 2: Tests Section 21: Test U: Robustness of Terminations and Integral Mounting Devices Superseding IS 9000 Part 19Section 1 to 5:1986 |
::Cross Referenced International Standard(s) & Standard(s) Of National SDO(s) :: |
||||||
Sl. No. | Prefix | Number | Part | Section | Year | |
1 | IEC | 60617 | - | - | - | |
2 | IEC | 60717 | - | - | - | |
3 | IEC | 61193 | 2 | - | - | |
4 | IEC | 61249 | 2 | 7 | - | |
5 | IEC | 61760 | 1 | - | - |
Sl.No. | Synosis Points | |
1 | This part of IEC 60738 describes terms and methods of test for positive step-function temperature coefficient thermistors, insulated and non-insulated types typically made from ferro-electric semi-conductor materials. | |
2 | It establishes standard terms, inspection procedures and methods of test for use in detail specifications for Qualification Approval and for Quality Assessment Systems for electronic components. |
Timeline Details |
|||||||
|
|||||||
|
|||||||
|
|||||||
Stages |
|||||
Sl. No. |
Stage | Date of Occurence | Remarks | Circulated to | Files |
1 | Generation of Document Number | 14-08-2023 | ------- | ||
2 | P-Draft Waived | 16-08-2023 | As IEC standard is available P-Draft is waived off. | ------- | |
3 | WC Draft | 16-08-2023 | Duration : 60 Days Submitted for HOD approval Remarks : IS 11534 Part 1 was published in: 1985 was largely based on IEC Pub 738-1 1982 ISQC 440000 was published in 1994 was identical to IEC Pub 738-lQC 440000 1982 This superseding of Standards is being done to combine the above mentioned standards and to align it with the latest version of IEC 60738-1: 2022 On publication of this standards IS 11534 Part 1: 1985 and ISQC 440000: 1994 stands withdrawn |
------- | |
4 | WC Draft | 21-08-2023 | WC approved by HOD |
LITDC LITD 05, LITD 24, | ------- |
5 | Skipped to Finalization | 24-04-2024 | Stage-Changed | ------- | |
6 | Finalization | 01-02-2024 | ------ | ------- | |
7 | Final Draft | 24-04-2024 | Submited for HOD approval Remarks: IS 11534 Part 1 was published in: 1985 was largely based on IEC Pub 738-1 1982 ISQC 440000 was published in 1994 was identical to IEC Pub 738-lQC 440000 1982 This superseding of Standards is being done to combine the above mentioned standards and to align it with the latest version of IEC 60738-1: 2022 On publication of this standards IS 11534 Part 1: 1985 and ISQC 440000: 1994 stands withdrawn |
------- | |
8 | Final Draft draft accepted by HOD and sent to Publication | 26-04-2024 | Final Draft approved by HOD | ------- |