| 1. |
MTD 03 : P8 |
The scope of work for the Panel on Test Procedure to Characterize Intrinsic Threshold Stress Intensity Range established by the Mechanical Testing of Metals Sectional Committee (MTD 3) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
04-09-2024 |
31-03-2025 |
4
|
| 2. |
MTD 03 : P3 |
The scope of work for the panel on Hardness testing established by the Mechanical Testing of Metals Sectional Committee (MTD 3) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
04-09-2024 |
04-09-2024 |
10
|
| 3. |
MTD 03 : P4 |
The scope of work for the panel on Fatigue and Fracture Testing established by the Mechanical Testing of Metals Sectional Committee (MTD 3) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
04-09-2024 |
04-09-2024 |
7
|
| 4. |
MTD 03 : P5 |
The scope of work for the panel on Impact Testing established by the Mechanical Testing of Metals Sectional Committee (MTD 3) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
04-09-2024 |
04-09-2024 |
7
|
| 5. |
MTD 03 : P7 |
The scope of work for the panel on Ductility testing established by the Mechanical Testing of Metals Sectional Committee (MTD 3) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
04-09-2024 |
04-09-2024 |
5
|
| 6. |
MTD 03 : P9 |
The scope of work for the panel on Uniaxial testing established by the Mechanical Testing of Metals Sectional Committee (MTD 3) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
04-09-2024 |
31-03-2025 |
8
|
| 7. |
MTD 04 : P2 |
|
- |
- |
13
|
| 8. |
MTD 04 : P7 |
|
- |
- |
16
|
| 9. |
MTD 04 : P4 |
|
- |
- |
5
|
| 10. |
MTD 04 : P11 |
|
- |
- |
16
|
| 11. |
MTD 04 : P29 |
|
- |
- |
11
|
| 12. |
MTD 04 : P30 |
|
- |
- |
3
|
| 13. |
MTD 05 : P2 |
To prepare working drafts for the revision of IS 1171 : 2011 – Ferromanganese — Specification (Fifth Revision) and IS 1470 : 2013 – Silicomanganese — Specification (Fourth Revision) |
19-02-2024 |
- |
7
|
| 14. |
MTD 05 : P3 |
|
- |
- |
15
|
| 15. |
MTD 06 : P1 |
The Panel is tasked with the standardization in the field of Ductile Iron Pipes |
20-12-2024 |
31-12-2026 |
13
|
| 16. |
MTD 06 : P3 |
The Panel is tasked with the standardization in the field of Cast Iron Fittings/Joints |
20-12-2024 |
30-12-2025 |
0
|
| 17. |
MTD 06 : P2 |
The Panel is tasked with the standardization in the field of various types of castings. |
20-12-2024 |
30-12-2025 |
2
|
| 18. |
MTD 06 : P4 |
The Panel is tasked with the standardization in the field of Pig Iron. |
20-12-2024 |
30-12-2025 |
0
|
| 19. |
MTD 06 : P5 |
The Panel is tasked with the standardization in the field of Cast Iron Pipes. |
20-12-2024 |
30-12-2025 |
0
|
| 20. |
MTD 07 : P1 |
|
- |
- |
9
|
| 21. |
MTD 07 : P2 |
|
- |
- |
12
|
| 22. |
MTD 08 : P4 |
|
- |
- |
10
|
| 23. |
MTD 08 : P5 |
|
- |
- |
4
|
| 24. |
MTD 08 : P6 |
|
- |
- |
6
|
| 25. |
MTD 09 : P1 |
|
- |
- |
6
|
| 26. |
MTD 09 : P2 |
|
- |
- |
7
|
| 27. |
MTD 09 : P5 |
For the revision of IS 11900 and IS 13351 |
10-02-2022 |
27-05-2024 |
0
|
| 28. |
MTD 09 : P6 |
Revision of IS 1921 on Flux Cored Solder Wire |
11-11-2023 |
31-12-2024 |
8
|
| 29. |
MTD 10 : P3 |
Standardization in the field of Gold |
01-10-2024 |
31-12-2025 |
6
|
| 30. |
MTD 10 : P1 |
Silver |
29-01-2025 |
29-01-2025 |
0
|
| 31. |
MTD 10 : P2 |
PLATINUM |
29-01-2025 |
29-01-2025 |
0
|
| 32. |
MTD 10 : P4 |
PALLADIUM |
29-01-2025 |
29-01-2025 |
0
|
| 33. |
MTD 10 : P5 |
Diamond |
29-01-2025 |
29-01-2025 |
1
|
| 34. |
MTD 11 : P3 |
Classification and testing of welding consumables for fusion welding of metallic materials. |
07-06-2024 |
07-06-2024 |
6
|
| 35. |
MTD 11 : P5 |
Standardization in the field of inspection and testing of welds using non-destructive or destructive methods. |
07-06-2024 |
07-06-2024 |
5
|
| 36. |
MTD 11 : P6 |
Standardization in the field of resistance welding and allied mechanical joining |
07-06-2024 |
07-06-2024 |
2
|
| 37. |
MTD 11 : P7 |
Standardization of terms, definitions and symbols relevant to welding and allied processes. |
07-06-2024 |
07-06-2024 |
2
|
| 38. |
MTD 11 : P8 |
Standardization of equipment for gas welding, thermal cutting and allied processes |
07-06-2024 |
07-06-2024 |
3
|
| 39. |
MTD 11 : P9 |
Standardization of occupational health and safety in welding and related processes. |
07-06-2024 |
07-06-2024 |
3
|
| 40. |
MTD 11 : P10 |
Standardization of quality requirements and recommendations for welding of metallic materials |
07-06-2024 |
07-06-2024 |
6
|
| 41. |
MTD 11 : P11 |
Standardization of requirements for welding and allied processes personnel. |
07-06-2024 |
07-06-2024 |
6
|
| 42. |
MTD 13 : P1 |
|
- |
- |
15
|
| 43. |
MTD 13 : P2 |
|
- |
- |
7
|
| 44. |
MTD 13 : P3 |
|
- |
- |
7
|
| 45. |
MTD 13 : P4 |
|
- |
- |
7
|
| 46. |
MTD 14 : P2 |
|
- |
- |
2
|
| 47. |
MTD 15 : P1 |
|
- |
- |
0
|
| 48. |
MTD 15 : P2 |
|
- |
- |
12
|
| 49. |
MTD 15 : P3 |
|
- |
- |
0
|
| 50. |
MTD 15 : P4 |
|
- |
- |
6
|
| 51. |
MTD 15 : P5 |
|
- |
- |
4
|
| 52. |
MTD 15 : P6 |
To review and formulate standards on refractory mortars. |
13-02-2025 |
31-12-2025 |
3
|
| 53. |
MTD 15 : P7 |
To formulate standards on special refractories. |
13-02-2025 |
31-12-2025 |
1
|
| 54. |
MTD 16 : P4 |
|
- |
- |
10
|
| 55. |
MTD 16 : P11 |
|
- |
- |
3
|
| 56. |
MTD 16 : P1 |
clarification on Indian standards pertaining to MTD16 |
11-02-2025 |
11-07-2026 |
7
|
| 57. |
MTD 19 : P7 |
Standardization in the field of stainless steel pipes and tubes |
01-04-2024 |
31-03-2026 |
1
|
| 58. |
MTD 19 : P5 |
Standardization in the field of welded steel pipes and tubes |
01-04-2024 |
31-03-2026 |
15
|
| 59. |
MTD 19 : P9 |
Standardization in the field of steel pipes and tubes for Oil and Gas |
01-04-2024 |
31-03-2026 |
7
|
| 60. |
MTD 19 : P4 |
Fittings |
13-12-2024 |
31-03-2026 |
2
|
| 61. |
MTD 19 : P14 |
Standardization in the field of special purpose steel pipes and tubes |
13-12-2024 |
31-03-2026 |
4
|
| 62. |
MTD 19 : P2 |
Standardization in the field of seamless steel pipes and tubes |
13-12-2024 |
31-03-2026 |
2
|
| 63. |
MTD 21 : P6 |
|
- |
- |
1
|
| 64. |
MTD 21 : P7 |
|
- |
- |
4
|
| 65. |
MTD 21 : P8 |
|
- |
- |
4
|
| 66. |
MTD 21 : P9 |
|
- |
- |
1
|
| 67. |
MTD 21 : P10 |
|
- |
- |
1
|
| 68. |
MTD 21 : P11 |
|
- |
- |
2
|
| 69. |
MTD 21 : P12 |
|
- |
- |
4
|
| 70. |
MTD 21 : P13 |
|
- |
- |
3
|
| 71. |
MTD 24 : P1 |
the scope of work for the panel on corrosion protection of pipeline established by the Corrosion Protection and Finishes Sectional Committee (MTD 24) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
05-04-2024 |
23-08-2024 |
5
|
| 72. |
MTD 24 : P2 |
the scope of work for the panel on hot dip processes established by the Corrosion Protection and Finishes Sectional Committee (MTD 24) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
05-04-2024 |
28-08-2024 |
2
|
| 73. |
MTD 24 : P5 |
The scope of work for the panel on Electroplated coatings established by the Corrosion Protection and Finishes Sectional Committee (MTD 24) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
28-08-2024 |
31-03-2025 |
5
|
| 74. |
MTD 24 : P7 |
|
- |
- |
2
|
| 75. |
MTD 24 : P9 |
The scope of work for the panel on Testing methods established by the Corrosion Protection and Finishes Sectional Committee (MTD 24) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
28-08-2024 |
31-03-2025 |
6
|
| 76. |
MTD 24 : P10 |
Formulation and developments of Indian standards related to hydrogen embrittlement. Address the queries/questions on Indian standards and provide suitable clarifications. Provide suggestions and comments on ISO ballots related to hydrogen embrittlement. Review and address the suggestions/recommendations provided by MNRE for the success of NATIONAL GREEN HYDROGEN MISSION. |
28-08-2024 |
03-10-2024 |
5
|
| 77. |
MTD 24 : P11 |
The scope of work for the panel on Atmospheric Corrosion established by the Corrosion Protection and Finishes Sectional Committee (MTD 24) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
28-08-2024 |
31-05-2025 |
3
|
| 78. |
MTD 24 : P6 |
The scope of work for the panel on Chromate conversion coatings established by the Corrosion Protection and Finishes Sectional Committee (MTD 24) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
28-08-2024 |
31-03-2025 |
4
|
| 79. |
MTD 24 : P8 |
The scope of work for the panel on Thermal Spray established by the Corrosion Protection and Finishes Sectional Committee (MTD 24) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
28-08-2024 |
31-03-2025 |
4
|
| 80. |
MTD 25 : P1 |
|
- |
- |
4
|
| 81. |
MTD 25 : P2 |
|
- |
- |
1
|
| 82. |
MTD 25 : P3 |
|
- |
- |
2
|
| 83. |
MTD 26 : P1 |
To prepare the working draft for the revision of IS 17082 : 2019 Guidelines for Design & Construction of Continuous pusher type coal/oil/gas fired reheating furnaces |
29-06-2021 |
- |
4
|
| 84. |
MTD 26 : P2 |
To prepare the working draft for the revision of IS 12392 : 1988 - Code of practice for design manufacture and testing of metallic recuperators |
19-07-2022 |
- |
5
|
| 85. |
MTD 33 : P2 |
the scope of work for the panel on Terminology and Nomenclature established by the Nanotechnologies Sectional Committee (MTD 33) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
21-08-2024 |
31-03-2025 |
2
|
| 86. |
MTD 33 : P3 |
The scope of work for the panel on Measurement and Characterization established by the Nanotechnologies Sectional Committee (MTD 33) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
23-08-2024 |
31-03-2025 |
11
|
| 87. |
MTD 33 : P4 |
The scope of work for the panel on hot dip processes established by the Nanotechnologies Sectional Committee (MTD 33) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
23-08-2024 |
31-03-2025 |
3
|
| 88. |
MTD 33 : P5 |
The scope of work for the panel on Material specifications established by the Nanotechnologies Sectional Committee (MTD 33) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
23-08-2024 |
31-03-2025 |
12
|
| 89. |
MTD 33 : P6 |
The scope of work for the panel on Product and Applications established by the Nanotechnologies Sectional Committee (MTD 33) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
21-08-2024 |
31-03-2025 |
8
|
| 90. |
MTD 34 : P1 |
|
- |
- |
0
|
| 91. |
MTD 34 : P6 |
|
- |
- |
0
|
| 92. |
MTD 34 : P5 |
|
- |
- |
0
|
| 93. |
MTD 34 : P2 |
|
- |
- |
0
|
| 94. |
MTD 34 : P3 |
|
- |
- |
0
|
| 95. |
MTD 34 : P4 |
|
- |
- |
0
|
| 96. |
MTD 34 : P7 |
|
- |
- |
0
|
| 97. |
MTD 34 : P8 |
|
- |
- |
0
|
| 98. |
MTD 34 : P9 |
|
- |
- |
0
|