1. |
ETD 01 : WG01 |
To review and revise IS 12360: 1988 as per corresponding IEC 60038: 2021 |
17-09-2021 |
31-01-2025 |
6
|
2. |
ETD 03 : WG01 |
Preparation of drafts and maintenance of standards for Mineral Insulating Oils (Product + guideline documents) |
17-06-2014 |
16-05-2024 |
4
|
3. |
ETD 03 : WG02 |
Preparation & maintenance of Product standards and Guidelines for Use of Esters - Natural and Synthetic |
18-06-2014 |
16-05-2024 |
5
|
4. |
ETD 07 : P1 : WG1 |
Formulation of Standard on Terminal blocks for copper conductors and Protective conductor terminal blocks for copper conductors |
01-08-2024 |
31-03-2025 |
1
|
5. |
ETD 07 : P3 : WG1 |
Preparation of Guidelines for Environmental Impact Assessment and Environmental Management Plan for Water Resources Projects |
21-03-2018 |
31-03-2025 |
1
|
6. |
ETD 10 : WG02 |
Reviewing of Publications of IEC TC 35 for Adoptions |
03-05-2024 |
31-12-2027 |
3
|
7. |
ETD 11 : WG01 |
To prepare draft standard for batteries used in drone applications |
05-01-2024 |
05-08-2024 |
7
|
8. |
ETD 11 : WG02 |
For reviewing the comments on IS 1652:2013 |
05-01-2024 |
05-06-2024 |
4
|
9. |
ETD 11 : WG03 |
For reviewing comments on IS 17882:2022 |
15-05-2024 |
10-06-2024 |
5
|
10. |
ETD 11 : WG04 |
This Joint working group has been made with the consent of ETD 10, Primary Cells and Batteries Sectional Committee, ETD 11, Secondary Cells and Batteries Sectional Committee and ETD 52, Electrical Energy Storage Systems Sectional Committee. This working group will prepare the draft Indian Standard on Chemistry Agnostic Standard for Stationary Application with the help of the report of NITI Aayog. |
20-08-2024 |
25-10-2024 |
7
|
11. |
ETD 11 : WG05 |
Accelerated Test Method Test for Cycle Life Test Of ACCs. |
11-10-2024 |
31-12-2024 |
4
|
12. |
ETD 11 : WG06 |
NWIP on Lead-Acid Starter Batteries Part 6: Batteries for Micro-Cycle Applications. |
11-10-2024 |
31-12-2024 |
4
|
13. |
ETD 13 : WG01 |
Maintenance of IS 13779, IS 14697 and IS 15884 |
08-05-2019 |
20-08-2025 |
5
|
14. |
ETD 13 : WG02 |
Maintenance of IS 15959 series of standards |
08-05-2019 |
20-09-2025 |
9
|
15. |
ETD 13 : WG03 |
Transition of Security Mechanism in IS 15959 series of standards |
30-09-2019 |
20-08-2025 |
9
|
16. |
ETD 13 : WG04 |
DC Energy Meter |
01-11-2019 |
20-08-2025 |
1
|
17. |
ETD 13 : WG05 |
Revision of IS 15707: 2006 |
01-11-2019 |
20-08-2025 |
1
|
18. |
ETD 13 : WG06 |
Revision of IS 12346: 1999 |
01-11-2019 |
20-08-2025 |
1
|
19. |
ETD 13 : WG07 |
Formulation of standards pertaining to “Panel on Air Handling Units” |
01-01-2024 |
01-01-2029 |
1
|
20. |
ETD 13 : WG08 |
Drafting amendments for IS 16444 (Parts 1 and 2) |
01-11-2019 |
20-08-2025 |
1
|
21. |
ETD 13 : WG9 |
Panel to revise standard on Mortise locks and latches Mechanically Operated |
26-07-2022 |
28-11-2028 |
1
|
22. |
ETD 13 : WG15 |
The scope of work for the panel on Testing methods established by the Corrosion Protection and Finishes Sectional Committee (MTD 24) of BIS, includes a comprehensive review of existing standards within its domain. The panel is tasked with recommending revisions, amendments, reaffirmation, or withdrawal of these standards, providing well-founded justifications for each action. It is also responsible for addressing industry inquiries, clarifying standards-related questions, and participating in voting on ISO ballots and ISO meetings pertinent to its domain. Additionally, the panel may undertake any supplementary tasks assigned by the committee as needed. |
28-08-2024 |
31-03-2025 |
7
|
23. |
ETD 13 : WG16 |
Standardization in the field of Ophthalmic surgical instruments |
20-08-2024 |
31-12-2026 |
4
|
24. |
ETD 14 : WG02 |
To define step voltage acceptance criteria in Fan Regulators as per IS 11037 |
29-08-2023 |
31-03-2025 |
10
|
25. |
ETD 14 : WG03 |
Revision of IS 371:1999 |
02-01-2025 |
31-12-2025 |
4
|
26. |
ETD 14 : WG05 |
To formulate new IS on Insulated Boxes for Energy Meters |
02-01-2025 |
31-12-2025 |
4
|
27. |
ETD 15 : WG15 |
To prepare the working draft for the revision of IS 17082 : 2019 Guidelines for Design & Construction of Continuous pusher type coal/oil/gas fired reheating furnaces |
29-06-2021 |
- |
6
|
28. |
ETD 15 : WG02 |
Adoption and updating of IEC standards. Members in group will also comment on IEC draft documents. |
20-06-2024 |
20-06-2024 |
6
|
29. |
ETD 15 : WG03 |
Revise and finalize IS 1231, 2223 , 8223 |
20-06-2024 |
20-06-2024 |
3
|
30. |
ETD 15 : WG04 |
Revise Standards related to test methods and codes of practice |
20-08-2024 |
20-06-2024 |
2
|
31. |
ETD 15 : WG05 |
Revise Brush related standards |
20-06-2024 |
20-06-2024 |
2
|
32. |
ETD 15 : WG06 |
To revise standards related to submersible and agricultural applications. |
20-06-2024 |
20-06-2024 |
3
|
33. |
ETD 15 : WG07 |
To revise generator standards |
27-09-2024 |
28-02-2025 |
1
|
34. |
ETD 16 : WG03 |
Panel for scrutinizing ISO / TC 262 , MSD 17:1 |
20-08-2024 |
20-08-2024 |
5
|
35. |
ETD 16 : WG04 |
Panel for scrutinizing ISO / TC 292 , MSD 17:2 |
20-08-2024 |
20-08-2024 |
4
|
36. |
ETD 16 : WG05 |
Standardization in the field of Otology |
06-12-2023 |
06-12-2030 |
3
|
37. |
ETD 16 : WG06 |
Standardization in the field of Syringes, Needles and Ampules |
19-08-2024 |
21-08-2029 |
8
|
38. |
ETD 16 : WG07 |
Standardization in the field of Catheters |
19-08-2024 |
21-08-2029 |
2
|
39. |
ETD 16 : WG08 |
Standardization in the field of Sterilization for Healthcare Products |
19-08-2024 |
21-08-2029 |
11
|
40. |
ETD 18 : WG01 |
Standardization in the field of Industrial Robot Safety |
23-02-2018 |
23-02-2018 |
4
|
41. |
ETD 18 : WG02 |
Standardization in the field of Service Robots |
23-02-2018 |
23-02-2018 |
2
|
42. |
ETD 18 : WG03 |
Standardization in the field of Industrial Data |
23-02-2018 |
23-02-2018 |
4
|
43. |
ETD 19 : WG01 |
Revision of IS/IEC/TS 61936-2 : 2015 Power installations exceeding 1 kV ac and 15 kV dc Part 2: dc
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information .
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance.
d. Identifying the potential advantages, limitations, and challenges associated with implementing Earthing systems in various sectors such as residential, commercial, and industrial and propose draft requirements to be included in the revision |
05-11-2024 |
03-03-2025 |
0
|
44. |
ETD 19 : WG03 |
Standardisation on “Power installations exceeding 1 kV AC and 1.5 kV DC Part 0: Principles to be observed in the design and erection of high voltage installations - Safety of high voltage installations.”
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information.
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance.
d. Identifying the potential advantages, limitations, and challenges associated with implementing Power Installation in various sectors such as residential, commercial, and industrial and propose draft requirements to be included in the revision. |
02-06-2024 |
30-04-2025 |
6
|
45. |
ETD 19 : WG04 |
Standardization of vocabulary, site selection, layout, site investigation, report preparation, economic & financial Planning, environmental impact and model contract documents for small hydropower projects. |
27-02-2024 |
- |
3
|
46. |
ETD 20 : WG02 |
Revision of IS 4648:1968 Guide for Electrical Layout in Residential Buildings
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information .
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance.
d. Identifying the potential advantages, limitations, and challenges associated with implementing Earthing systems in various sectors such as residential, commercial, and industrial and propose draft requirements to be included in the revision of IS 4648. |
18-07-2024 |
18-11-2024 |
3
|
47. |
ETD 20 : WG03 |
Revision of IS 8061:1976 Code of Practice for Design Installation and Maintenance of Service Lines up to and Including 650 V
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information .
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance. |
02-11-2024 |
31-05-2025 |
3
|
48. |
ETD 20 : WG04 |
Revision of IS 8923:1978 Warning symbol for dangerous voltages and Revision of: IS 2551:1982 Danger Notice Plates
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information .
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance. |
01-08-2024 |
30-11-2024 |
3
|
49. |
ETD 20 : WG05 |
Standardization of hydraulic & structural design, technical specifications, construction, maintenance for civil & hydro-mechanical works of small hydropower projects. |
27-02-2024 |
- |
2
|
50. |
ETD 20 : WG06 |
Standardization of electro-mechanical works including generating units, auxiliaries, automation, power evacuation, operation & maintenance and renovation of small hydropower projects. |
27-02-2024 |
- |
2
|
51. |
ETD 20 : WG07 |
IS 8884 : 1978 Code of practice for the installation of electric bells and call system
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information.
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance.
d. Identifying the potential advantages, limitations, and challenges associated with implementing installation of electric bells and call system in various sectors such as residential, commercial, and industrial and propose draft requirements to be included in the revision of IS 8884. |
01-12-2024 |
01-06-2025 |
4
|
52. |
ETD 20 : WG08 |
IS 7689 : 1989 Guide for control of undesirable static electricity
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information.
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance. |
01-12-2024 |
31-07-2025 |
2
|
53. |
ETD 25 : WG01 |
Preparation of working drafts for Planning & Selection, Inspection Manual, Special Applications (Persons with disabilities) |
29-03-2023 |
31-12-2024 |
5
|
54. |
ETD 25 : WG02 |
Preparation of drafts for lifts for special applications |
29-03-2023 |
30-08-2024 |
7
|
55. |
ETD 25 : WG03 |
Preparation and maintenance of standards on Escalators and Moving Walks |
14-11-2024 |
31-12-2026 |
5
|
56. |
ETD 28 : WG02 |
To study and prepare report on floating solar PV plant standardization and prepare working drafts for the Floatovolatic systems. |
04-04-2024 |
04-11-2024 |
5
|
57. |
ETD 28 : WG07 |
Preparation of a draft standard on Sustainability in the area of Solar PV. The WG would first submit a white paper on the subject before drafting a document within a period of 30 days. |
11-12-2024 |
17-03-2025 |
5
|
58. |
ETD 28 : WG03 |
Sub-sector WG responsible for preparation of standards on "PV Systems, tests and support structures" |
11-12-2024 |
31-12-2026 |
3
|
59. |
ETD 28 : WG04 |
Preparation and review of Indian Standards for sector - "Modules, non concentrating" |
11-12-2024 |
31-12-2026 |
3
|
60. |
ETD 28 : WG05 |
Preparation and review of Indian Standards under sub-sector "Concentrator modules" |
11-12-2024 |
03-12-2026 |
0
|
61. |
ETD 28 : WG06 |
Preparation and review of Indian Standards under Sub-sector "Renewable energy off grid systems, including access to electricity, rural electrification and hybrid systems" |
11-12-2024 |
31-12-2026 |
1
|
62. |
ETD 30 : WG01 |
Standardization for LPG Meters cum Regulators |
26-07-2024 |
26-07-2024 |
5
|
63. |
ETD 31 : WG01 |
To review IEC standards on semiconductor converter and Stabilized power supplies. Enlisted experts to comment on SC22E and TC 22 documents |
20-06-2024 |
20-06-2024 |
1
|
64. |
ETD 31 : WG02 |
To review IEC standards on Adjustable speed electric power drive systems (PDS) and comment on SC 22G documents |
18-06-2024 |
01-08-2024 |
1
|
65. |
ETD 31 : WG03 |
To review IEC standards on UPS, explore for indigenous areas of standardization, and comment on SC 22H documents |
18-06-2024 |
18-06-2024 |
1
|
66. |
ETD 32 : WG01 |
Standardization in the field of Infusion Equipment |
19-08-2024 |
21-08-2029 |
3
|
67. |
ETD 32 : WG02 |
Standardization in the field of Transfusion Equipment |
19-08-2024 |
21-08-2029 |
5
|
68. |
ETD 32 : WG03 |
Standardization in the field of Cold Chain Equipment |
19-08-2023 |
21-08-2029 |
4
|
69. |
ETD 32 : WG04 |
Standardization in the field of Medical Furniture |
19-08-2024 |
21-08-2029 |
2
|
70. |
ETD 32 : WG05 |
for revision of IS 15652 : 2006 |
29-08-2022 |
29-08-2022 |
3
|
71. |
ETD 32 : WG06 |
Formulation Indian Standards on Heat Shrinkable Sleeve Testing |
29-08-2022 |
29-08-2022 |
3
|
72. |
ETD 32 : WG07 |
Panel for Application Statistical Methods Work related ballots and identification of expert for ISO projects |
21-08-2024 |
21-08-2024 |
11
|
73. |
ETD 32 : WG08 |
Panel for Basic Statistical Methods related ballots and identification of expert for ISO projects |
21-08-2024 |
21-08-2024 |
2
|
74. |
ETD 32 : WG9 |
Panel for Process Control related ballots and identification of expert for ISO projects |
21-08-2024 |
21-08-2024 |
2
|
75. |
ETD 33 : WG01 |
To update IEC 60317/ IS 13730 series. Develop indigenous standards where possible. |
01-08-2024 |
01-08-2024 |
4
|
76. |
ETD 34 : WG01 |
Standardization in the field of Instruments used in Orthopaedic Surgery |
09-08-2024 |
08-08-2034 |
7
|
77. |
ETD 34 : WG02 |
Standardization in the field of Orthopedic Power tools like bone cutting saws and bone drills, etc. |
09-08-2024 |
08-08-2034 |
7
|
78. |
ETD 34 : WG03 |
Standardization in the field of Veterinary Hospitals covering minimum facilities, particular requirements for animal group wise Veterinary Hospitals (i.e. Small animals, Bovines, Equines, Reptiles, Heavy / Large animals, Avians, Exotic Animals, etc.), minimum requirements for devices and instruments etc. |
26-06-2024 |
25-06-2034 |
7
|
79. |
ETD 34 : WG04 |
Standardization in the field of Instruments used in Veterinary Surgery |
26-06-2024 |
25-06-2034 |
7
|
80. |
ETD 34 : WG05 |
Panel for Scrutiny of documents pertaining to ISO/TC 176 |
20-08-2024 |
21-08-2024 |
6
|
81. |
ETD 36 : WG01 |
To Revise IS 14956 'Live working - Minimum approach distances for a.c. systems in the voltage range 72.5 kV to 800 kV - A method of calculation' |
16-12-2024 |
28-02-2025 |
0
|
82. |
ETD 39 : WG01 |
Preparation of Working Drafts/Review of standards on High Voltage Fuses |
09-05-2024 |
01-06-2024 |
4
|
83. |
ETD 39 : WG02 |
Preparation of Working Drafts/Revison/Review of the standards on low voltage fuses:
|
09-05-2024 |
01-06-2024 |
6
|
84. |
ETD 40 : WG01 |
To review standardization for component used in HVDC systems. Experts enlisted will comment on SC 22F draft documents |
01-08-2024 |
01-08-2024 |
3
|
85. |
ETD 40 : WG02 |
To review standardization in system wide planning and testing of HVDC systems. Comment on TC 115 documents. |
01-08-2024 |
01-08-2024 |
2
|
86. |
ETD 42 : WG01 |
Revision of IS/IEC 61400-2 Wind turbines - Part 2: Small wind turbines
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information .
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance.
d. Identifying the potential advantages, limitations, and challenges associated with implementing Earthing systems in various sectors such as residential, commercial, and industrial and propose draft requirements to be included in the revision |
28-07-2024 |
28-11-2024 |
2
|
87. |
ETD 42 : WG02 |
Standard on Design requirements for fixed offshore wind turbines and floating offshore wind turbines.
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information .
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance. |
01-08-2024 |
01-12-2024 |
2
|
88. |
ETD 42 : WG03 |
Standard on Wind turbine blades
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information .
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance. |
01-08-2024 |
01-12-2024 |
2
|
89. |
ETD 42 : WG04 |
Standard on Wind Turbine Generator - Life Time Extension
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information.
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance.
d. Identifying the potential advantages, limitations, and challenges associated with implementing Wind Turbine Generator in various sectors such as residential, commercial, and industrial and propose draft requirements to be included in the new standard. |
01-08-2024 |
30-04-2025 |
5
|
90. |
ETD 42 : WG05 |
Standard on Design Requirements of Wind energy generation systems
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information.
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance. |
02-12-2024 |
01-06-2025 |
3
|
91. |
ETD 42 : WG06 |
Standard on Wind Turbines Blades & Tower Design
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information.
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance. |
02-12-2024 |
30-04-2025 |
3
|
92. |
ETD 42 : WG07 |
Standard on Fixed and Floating offshore Wind Turbines.
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information.
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance. |
01-10-2024 |
15-04-2025 |
4
|
93. |
ETD 42 : WG08 |
Standard on Power Performance Requirements of Wind Turbines
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information.
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance.
d. Identifying the potential advantages, limitations, and challenges associated with implementing Wind Energy Generation Systems in various sectors such as residential, commercial, and industrial and propose draft requirements to be included in the new standard. |
01-10-2024 |
15-04-2025 |
2
|
94. |
ETD 42 : WG9 |
Standard on Measurement of Electrical Characteristics and Applications of Wind Turbines
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information.
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance.
d. Identifying the potential advantages, limitations, and challenges associated with implementing Wind Energy Generation Systems in various sectors such as residential, commercial, and industrial and propose draft requirements to be included in the new standard. |
01-10-2024 |
15-04-2025 |
2
|
95. |
ETD 46 : WG01 |
Assessment of IEC SC 8A Publications from Indian perspective for adaption as Indian Standard |
03-10-2024 |
31-12-2024 |
5
|
96. |
ETD 49 : WG03 |
To Review Part 1 & Part 2 of Revised NLC |
05-11-2024 |
31-01-2025 |
2
|
97. |
ETD 49 : WG05 |
To Review Part 3 of Revised NLC |
05-11-2024 |
31-01-2025 |
3
|
98. |
ETD 49 : WG06 |
Development of new Indian standard on 'Guidelines for Specifying, commissioning and acceptance testing of sheet fed single/multi-color offset printing machines' |
10-08-2023 |
31-12-2025 |
6
|
99. |
ETD 49 : WG07 |
To Review Part 6_Section 1,7,9 & 12 of Revised NLC |
05-11-2024 |
31-01-2025 |
4
|
100. |
ETD 49 : WG08 |
Development of new Indian standard on 'Assessment of Digital Print Outputs' |
10-08-2023 |
19-12-2026 |
2
|
101. |
ETD 49 : WG9 |
To Review Part 6_Section 5 of Revised NLC |
05-11-2024 |
31-01-2025 |
3
|
102. |
ETD 49 : WG10 |
Development of new Indian standard on 'Computer to Plate Offset Machines' |
10-08-2023 |
30-06-2026 |
1
|
103. |
ETD 49 : WG11 |
To Review Part 7 of Revised NLC |
05-11-2024 |
31-01-2025 |
3
|
104. |
ETD 49 : WG12 |
To Review Part 8 & Part 9 of Revised NLC |
05-11-2024 |
31-01-2025 |
2
|
105. |
ETD 49 : WG13 |
To Review Part 10 of Revised NLC |
05-11-2024 |
31-01-2025 |
2
|
106. |
ETD 49 : WG14 |
Development of new Indian standard on 'Flexography Machines' |
10-08-2023 |
30-11-2026 |
4
|
107. |
ETD 49 : WG15 |
To Review Part 12 & Part 13 of Revised NLC |
05-11-2024 |
31-01-2025 |
4
|
108. |
ETD 49 : WG16 |
Development of new Indian standard on 'Paper Folding Machines' |
10-08-2023 |
31-12-2025 |
4
|
109. |
ETD 49 : WG17 |
Review and revision of standards related to hydrogen production technologies |
24-09-2024 |
31-07-2025 |
3
|
110. |
ETD 49 : WG04 |
To Revise IS 11071 and IS 7785 Series |
16-12-2024 |
28-02-2025 |
0
|
111. |
ETD 49 : WG18 |
Development of Indian Standard on Luminaires for swimming pools and similar applications |
16-12-2024 |
28-02-2025 |
0
|
112. |
ETD 50 : WG02 |
Preparation of Standardization Plan for LVDC Systems in India.
1. Conduct a thorough analysis of existing LVDC systems worldwide and evaluate their applicability to the Indian context.
- Review current standards, regulations, and practices related to LVDC systems within India and internationally.
2. Identify relevant stakeholders, including government agencies, industry experts, educational institutions, and utility providers.
3. Develop a comprehensive standardization plan outlining key components, methodologies, and timelines for implementing LVDC systems in India. |
07-08-2024 |
07-12-2024 |
5
|
113. |
ETD 50 : WG03 |
Review of IS 63318 to develop specification for other applications of LVDC for Electricity Access.
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information .
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance. |
07-08-2024 |
31-12-2024 |
1
|
114. |
ETD 50 : WG04 |
Standard on Wind turbine blades
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information .
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance. |
01-08-2024 |
01-12-2024 |
0
|
115. |
ETD 50 : WG05 |
Standard on LVDC industry applications
1. Conduct a thorough analysis of existing LVDC systems worldwide and evaluate their applicability to the Indian context.
- Review current standards, regulations, and practices related to LVDC systems within India and internationally.
2. Identify relevant stakeholders, including government agencies, industry experts, educational institutions, and utility providers.
3. Develop a comprehensive standardization plan outlining key components, methodologies, and timelines for implementing LVDC systems in India for Industrial application |
02-11-2024 |
31-05-2025 |
0
|
116. |
ETD 50 : WG06 |
Standard on Use Case Collection and Analysis: LVDC Systems for Public Electricity Distribution and distribution microgrids
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information.
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities. |
02-11-2024 |
31-07-2025 |
0
|
117. |
ETD 50 : WG07 |
Arc Hazards and Safety in LVDC
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information.
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance. |
15-11-2024 |
01-06-2025 |
0
|
118. |
ETD 50 : WG08 |
Revision of IS/IEC/TR 63282 : 2020 LVDC systems Assessment of standard voltages and power quality requirements
1. Conduct a thorough analysis of existing LVDC systems worldwide and evaluate their applicability to the Indian context.
- Review current standards, regulations, and practices related to LVDC systems within India and internationally.
2. Identify relevant stakeholders, including government agencies, industry experts, educational institutions, and utility providers.
3. Develop a comprehensive standardization plan outlining key components, methodologies, and timelines for implementing LVDC systems in India. |
15-11-2024 |
01-06-2025 |
0
|
119. |
ETD 52 : WG01 |
To prepare draft on BMS for Li-ion batteries |
23-04-2024 |
23-10-2024 |
6
|
120. |
ETD 53 : WG01 |
Preparation of new standard on Management of network assets in power systems - Management aspect |
30-11-2024 |
31-03-2025 |
2
|
121. |
ETD 54 : WG01 |
Standard for Design requirements of Marine energy systems
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information .
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance. |
09-08-2024 |
09-12-2024 |
2
|
122. |
ETD 54 : WG02 |
Standard on “Power performance assessment of Marine Energy Wave Tidal and Other Water Current Converters”
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information .
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance. |
01-08-2024 |
01-12-2024 |
3
|
123. |
ETD 54 : WG03 |
To formulate standard for Nailing Machines for soil nail walls and review the standard periodically once it is published. |
21-06-2024 |
20-11-2031 |
0
|
124. |
ETD 54 : WG04 |
Marine energy - Design requirements
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information.
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance. |
05-10-2024 |
31-03-2025 |
0
|
125. |
ETD 54 : WG05 |
Design and analysis of an Ocean Thermal Energy Conversion (OTEC) Plant
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information.
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance. |
05-10-2024 |
31-03-2025 |
0
|
126. |
ETD 54 : WG06 |
Assessment of mooring system for marine energy converters MECS
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information.
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance. |
05-10-2024 |
31-03-2025 |
0
|
127. |
ETD 54 : WG07 |
Marine energy - Power performance assessment of Wind Converters
a. Conduct an extensive study and comparative analysis of existing literature, research papers, international standards, and any other published information.
b. Evaluate the level of manufacturing bases in the country to understand the capabilities and quality of production facilities.
c. Assess the testing infrastructure in the country to determine the availability and adequacy of facilities for conducting product testing and quality assurance. |
05-10-2024 |
31-03-2025 |
0
|