| 1. |
MED 01 : WG01 |
Revision of IS 2825 'Code for Unfired Pressure Vessels' |
27-02-2025 |
01-01-2025 |
6
|
| 2. |
MED 01 : WG02 |
This specification covers the design, consstruction, inspection and
testing of cylindrical shell and plain tube heat exchangers for application
in the petroleum and general chemical industry. Both the requirements
of the industries where the operating conditions are not severe or where
costlier materials of construction are used as well as the ntore severe
requirements of the petroleum and chemical processing industries are
covered. |
22-04-2025 |
22-04-2025 |
10
|
| 3. |
MED 01 : WG03 |
Formulate Indian Standard on Pressure vessels for storage/transport of Green Hydrogen |
28-03-2025 |
31-05-2026 |
4
|
| 4. |
MED 03 : WG01 |
Semi-hermetic compressor |
13-10-2024 |
01-01-2028 |
23
|
| 5. |
MED 03 : WG02 |
Automotive AC |
13-10-2024 |
01-01-2028 |
20
|
| 6. |
MED 03 : WG03 |
Scope of HPWH |
01-10-2024 |
01-10-2029 |
6
|
| 7. |
MED 03 : WG04 |
Construction and Installation of HPWH |
01-10-2024 |
01-10-2029 |
19
|
| 8. |
MED 03 : WG05 |
Instrumentation and Test Conditions of HPWH |
01-10-2024 |
01-10-2029 |
11
|
| 9. |
MED 03 : WG06 |
Performance of HPWH |
01-10-2024 |
01-10-2029 |
17
|
| 10. |
MED 03 : WG07 |
Safety Compliance of HPWH |
01-10-2024 |
01-10-2029 |
7
|
| 11. |
MED 03 : WG08 |
Code of Practice for Design and Installation of Closed-circuit Ammonia Refrigeration System |
27-02-2025 |
01-01-2025 |
6
|
| 12. |
MED 03 : WG13 |
IS 11329 Finned type heat exchanger |
27-02-2025 |
01-01-2025 |
10
|
| 13. |
MED 03 : WG14 |
IS 11328 Self-contained automatic ice makers |
27-02-2025 |
01-01-2025 |
5
|
| 14. |
MED 03 : WG12 |
IS 7613 Air filters for general ventilation |
27-02-2025 |
01-01-2025 |
5
|
| 15. |
MED 03 : WG15 |
IS 3315: 2019 Evaporative air coolers (Desert Coolers) and IS 11951: 2009 Pumpset for desert coolers |
27-02-2025 |
01-01-2025 |
14
|
| 16. |
MED 03 : WG16 |
IS 1474 ‘Commercial Refrigerator’ |
27-02-2025 |
01-01-2025 |
5
|
| 17. |
MED 03 : WG17 |
Electronic Expansion Valve (EXV) |
27-02-2025 |
01-01-2025 |
3
|
| 18. |
MED 03 : WG18 |
Bottled Water Dispensers & Self-contained drinking water coolers |
27-02-2025 |
01-01-2025 |
4
|
| 19. |
MED 03 : WG9 |
Compressors |
27-02-2025 |
01-01-2025 |
12
|
| 20. |
MED 03 : WG10 |
Deep Freezers |
27-02-2025 |
01-01-2025 |
12
|
| 21. |
MED 03 : WG11 |
Panel on Air Handling Units |
27-02-2025 |
01-01-2025 |
8
|
| 22. |
MED 03 : WG19 |
IS 16590 Chilling packages |
27-02-2025 |
01-01-2025 |
6
|
| 23. |
MED 03 : WG20 |
Selection, operation and maintenance of room AC |
27-02-2025 |
01-01-2025 |
7
|
| 24. |
MED 03 : WG21 |
Evaluation method of Room air conditioner efficiency |
27-02-2025 |
01-01-2025 |
9
|
| 25. |
MED 03 : WG22 |
IS 2370 ‘Walk-in Cold Rooms' |
27-02-2025 |
01-01-2025 |
20
|
| 26. |
MED 03 : WG23 |
Panel on ICAP + HPMP 3 |
27-02-2025 |
01-01-2025 |
14
|
| 27. |
MED 03 : WG24 |
Cooling cabinet made of clay |
27-02-2025 |
01-01-2025 |
4
|
| 28. |
MED 03 : WG25 |
Non-ducted Portable Air Conditioners and Heat Pumps |
27-02-2025 |
01-01-2025 |
8
|
| 29. |
MED 03 : WG26 |
Smart Technology (IoT) in Refrigeration and Air Conditioning |
27-02-2025 |
01-01-2025 |
13
|
| 30. |
MED 03 : WG27 |
Commerical Evaporative Air Cooler |
27-02-2025 |
01-01-2025 |
14
|
| 31. |
MED 03 : WG28 |
Automotive air conditioning and Mobile air-conditioning |
27-02-2025 |
01-01-2025 |
23
|
| 32. |
MED 03 : WG29 |
Heat pump Water Heater |
27-02-2025 |
01-01-2025 |
14
|
| 33. |
MED 03 : WG30 |
Service Valves |
27-02-2025 |
01-01-2025 |
3
|
| 34. |
MED 03 : WG31 |
Identification, Storage, Transportation and Handling of Refrigerants / Cylinders |
27-02-2025 |
01-01-2025 |
8
|
| 35. |
MED 03 : WG32 |
Cold Chain and CO2 trans-critical systems |
27-02-2025 |
01-01-2025 |
4
|
| 36. |
MED 03 : WG33 |
Testing and calculating methods for seasonal performance factors of air-cooled air conditioners and |
27-02-2025 |
01-01-2025 |
7
|
| 37. |
MED 03 : WG34 |
Sustainability in Refrigeration and Air Conditioning |
26-03-2025 |
01-01-2025 |
0
|
| 38. |
MED 04 : WG05 |
Performance Guidance for Solar Air Heating for Industrial process heat applications/S.D. |
27-02-2025 |
01-01-2025 |
8
|
| 39. |
MED 04 : WG06 |
Draft Revision of IS 13152 (Part 1) : 2013 |
27-02-2025 |
01-01-2025 |
3
|
| 40. |
MED 04 : WG07 |
Panel for "Terminologies for Renewable Energies" |
27-02-2025 |
01-01-2025 |
5
|
| 41. |
MED 07 : WG03 |
The committee has considered the suggestions from MEDC regarding material handling sector standards to identify their current application in the industry. Consequently, the MED 07 committee has decided to form a panel. This panel will review MEDC's suggestions, examine all material handling standards, and submit their recommendations. |
25-06-2024 |
31-03-2025 |
4
|
| 42. |
MED 07 : WG04 |
The committee has taken the NWIP for Development of Indian/International Standards on “Mechanical anti-collision system for Dumpers”. |
25-06-2024 |
25-06-2025 |
4
|
| 43. |
MED 07 : WG05 |
This working group will work for the development of a new standard for Proximity Warning Devices and Anti-Collision Devices for earth-moving machinery. |
15-04-2025 |
31-03-2026 |
3
|
| 44. |
MED 07 : WG06 |
This working group will develop a new standard for Automatic Fire Detection and Suppression Systems (AFDSS) in the earth-moving sector. |
15-04-2025 |
31-03-2026 |
4
|
| 45. |
MED 08 : WG01 |
Review of Indian Standards (IS 10970, IS 12527, IS 13618) |
02-08-2024 |
31-12-2024 |
2
|
| 46. |
MED 08 : WG02 |
IS 9123 : 1979 — Specification for battery locomotives for use in mines |
02-08-2024 |
31-12-2024 |
2
|
| 47. |
MED 08 : WG03 |
Review and Merging IS 13219:1992 ‘Rock bolts for mines (cement grouted) – General requirements’ and IS 13517:1992 ‘Rock bolts - Resin type – Specification’ |
02-08-2024 |
31-12-2024 |
2
|
| 48. |
MED 08 : WG04 |
NWIP: ‘Diesel Engine Systems For Underground Coal Mines: Explosion Protected’ |
02-08-2024 |
31-12-2024 |
2
|
| 49. |
MED 08 : WG05 |
NWIP: Side Discharge Loaders(SDLs and Load Haul Dumpers LHDs |
27-05-2025 |
26-05-2027 |
2
|
| 50. |
MED 08 : WG06 |
This standard would cover design specifications, sensor technologies, real-time data logging, wireless transmission, testing methodologies, performance metrics (accuracy, sensitivity), environmental durability, safety standards (intrinsic safety in explosive atmospheres), and maintenance protocols. |
30-06-2025 |
30-06-2027 |
1
|
| 51. |
MED 08 : WG07 |
• Structural Integrity Underground mining machines must be designed for confined, rugged, and low-visibility environments. They must include reinforced frames, flameproof electrical enclosures, impact-resistant panels, and compliant turning radii. • Operator Safety Features Must include ROPS/FOPS (Roll-Over/Falling Object Protection Structures), emergency shut-offs, ergonomic seat placement, fire suppression systems, and low-noise cabins. • Power Systems Can be diesel, battery-electric, or hybrid. Diesel variants must comply with emission norms (CPCB/Euro Stage IV). Battery systems must meet IEC 62619 and thermal stability criteria. • Lighting and Signaling Standardized placement of LED work lights, tail/brake lights, reverse alarms, and reflective markings for visibility in dusty/low-light underground conditions. • Control and Communication Operator panels must be intuitive, with indicators for fuel, battery, speed, brake status, and tilt sensors. Integration with IoT or telemetry for |
30-06-2025 |
30-06-2027 |
2
|
| 52. |
MED 10 : WG01 |
Review of MED 10 Standards |
30-12-2024 |
30-12-2024 |
10
|
| 53. |
MED 10 : WG02 |
WG FOR METALLIC OR POLYMER COATED - WELDED WIRE MESH FENCING- SPECIFICATION |
05-05-2025 |
05-01-2028 |
4
|
| 54. |
MED 14 : WG12 |
This working group will provide the working draft of IS 3938, Specification for Electric Wire Rope Hoists. Additionally, this working draft will discuss any comments on the wide circulation draft and finalize the document for publication. |
17-12-2024 |
17-12-2024 |
2
|
| 55. |
MED 14 : WG13 |
This working group has been tasked to develop new standards for Mobile elevating work platforms and will consider the following subjects as their scope of work;
1. Mobile elevating work platforms Design calculations safety requirements and test methods relative to special features Part 1 MEWPs with retractable guardrail systems
2. Mobile elevating work platforms Design calculations safety requirements and test methods relative to special features Part 2 MEWPs with non conductive insulating components
3. Mobile elevating work platforms Design calculations safety requirements and test methods relative to special features Part 3 MEWPs for orchard operations |
30-04-2025 |
31-03-2026 |
5
|
| 56. |
MED 16 : WG02 |
For the revision of IS 17613 |
25-07-2024 |
31-03-2028 |
5
|
| 57. |
MED 16 : WG03 |
Combo Valve for 990 Litres Water Capacity Cylinders |
20-12-2024 |
31-12-2028 |
7
|
| 58. |
MED 16 : WG04 |
ISO 11623:2015 ‘Gas cylinders — Composite construction — Periodic inspection and Testing |
20-12-2024 |
31-12-2028 |
1
|
| 59. |
MED 16 : WG05 |
Review of IS 12936 Basic requirements for delivery persons engaged in the delivery of LPG cylinders - Code of practice (First Revision) |
20-12-2024 |
31-12-2028 |
3
|
| 60. |
MED 16 : WG01 |
Studies to ascertain maximum service life of LPG cylinders (as per IS 3196-1) |
11-02-2025 |
31-12-2028 |
7
|
| 61. |
MED 16 : WG11 |
Draft revision of IS 16507 ‘Transportable gas cylinders cascade - Specification’ based on revised ISO 10961:2019 ‘Gas cylinders — Cylinder bundles — Design, manufacture, testing and inspection |
11-03-2025 |
31-12-2028 |
6
|
| 62. |
MED 16 : WG12 |
To formulate an Indian Standard on Two piece tin aerosol Cans for refrigerant gases |
14-04-2025 |
01-01-2025 |
2
|
| 63. |
MED 16 : WG13 |
To formulate an Indian Standard on Cylinder Valve Inlet Connections |
14-04-2025 |
01-01-2025 |
4
|
| 64. |
MED 16 : WG14 |
To formulate Indian Standard on Integrated valves with pressure regulators |
14-04-2025 |
01-01-2025 |
3
|
| 65. |
MED 16 : WG15 |
To formulate Indian Standard on Welded Low Carbon Steel Containers above 250 Litre and Not Exceeding 1 000 Litre Water Capacity for the Transport of LPG- Periodic Inspection and Testing |
14-04-2025 |
01-01-2025 |
6
|
| 66. |
MED 16 : WG16 |
To formulate Indian Standard on Gas Cylinders- Cascade- Periodic Inspection and Testing |
14-04-2025 |
01-01-2025 |
5
|
| 67. |
MED 17 : WG01 |
Review of pre 2000 Standards |
25-02-2025 |
01-01-2025 |
5
|
| 68. |
MED 17 : WG05 |
(MED 17 : P5 - Revision of IS 6034-Insulating oil conditioning plants - Specification) |
27-02-2025 |
01-01-2025 |
7
|
| 69. |
MED 18 : WG01 |
To provide recommendations for adoption of ISO standards as Indian Standards. |
25-03-2025 |
30-06-2026 |
5
|
| 70. |
MED 20 : WG01 |
Specifications of submersible sewage pump |
15-04-2025 |
15-10-2025 |
2
|
| 71. |
MED 20 : WG02 |
Rewiew of IS 10572 |
15-04-2025 |
15-10-2025 |
3
|
| 72. |
MED 20 : WG03 |
Rewiew of IS 10981 |
15-04-2025 |
15-10-2025 |
2
|
| 73. |
MED 20 : WG04 |
Review of IS 11346 |
15-04-2025 |
15-10-2025 |
4
|
| 74. |
MED 20 : WG05 |
Review of IS 8472 |
15-04-2025 |
15-10-2025 |
4
|
| 75. |
MED 20 : WG06 |
Review of IS 9137 |
15-04-2025 |
15-10-2025 |
3
|
| 76. |
MED 20 : WG07 |
Review of IS 10804 (Part 1 & 2) |
15-04-2025 |
15-10-2025 |
4
|
| 77. |
MED 20 : WG08 |
Review of IS 11745 |
15-04-2025 |
15-10-2025 |
4
|
| 78. |
MED 20 : WG9 |
comparison of Electrical Requirements of IS 8034 : 2018, IS 14220 : 2018 With IS 9283 : 2024 |
15-04-2025 |
15-10-2025 |
4
|
| 79. |
MED 20 : WG10 |
Review of Requirements of BARC for IS 5120 and incorporate & finalize the revision draft of IS 5120 |
15-04-2025 |
15-10-2025 |
2
|
| 80. |
MED 21 : WG01 |
New Work Item Proposals received under MED 21 Committee |
17-04-2025 |
31-03-2026 |
5
|
| 81. |
MED 23 : WG02 |
Review of MED 23 Standards Panel |
30-12-2024 |
30-12-2024 |
4
|
| 82. |
MED 23 : WG03 |
WG for review of IS 4246 and IS 17153 |
30-12-2024 |
30-12-2024 |
4
|
| 83. |
MED 23 : WG04 |
WG FOR PORTABLE GAS STOVES |
05-05-2025 |
06-06-2028 |
3
|
| 84. |
MED 24 : WG03 |
Working Group on Electronic Lock |
15-10-2024 |
15-10-2024 |
5
|
| 85. |
MED 24 : WG05 |
Working Group on Revision of IS 11188 (Part 1)- Vault Strong Room doors Part 1 specification |
15-10-2024 |
15-10-2024 |
9
|
| 86. |
MED 24 : WG06 |
Working Group on formulation of standard on Residential safe |
15-10-2024 |
15-10-2024 |
9
|
| 87. |
MED 24 : WG07 |
Working Group on revision of IS 17566 |
15-10-2024 |
15-10-2024 |
5
|
| 88. |
MED 24 : WG08 |
To develop standard on Full Body Protector- Male and Female |
11-04-2025 |
06-06-2028 |
5
|
| 89. |
MED 25 : WG03 |
preparing draft on ‘Guidelines for Specifying, commissioning and acceptance testing of sheet |
27-02-2025 |
01-01-2025 |
0
|
| 90. |
MED 25 : WG04 |
preparation of working draft on 'Assessment of Digital Printing Outputs’ |
27-02-2025 |
01-01-2025 |
6
|
| 91. |
MED 25 : WG05 |
Preparation of working draft on 'Computer to Plate (CTP) Offset Plates’ |
27-02-2025 |
01-01-2025 |
5
|
| 92. |
MED 25 : WG06 |
Panel for 'Flexography Printing Machines’ |
27-02-2025 |
01-01-2025 |
3
|
| 93. |
MED 25 : WG07 |
Preparation of working draft on 'Paper Folding Machines’ |
27-02-2025 |
01-01-2025 |
3
|
| 94. |
MED 25 : WG08 |
Preparation of working draft on ‘Printed Electronics’ |
27-02-2025 |
01-01-2025 |
0
|
| 95. |
MED 27 : WG02 |
SOLAR POWERED HANDPUMPS MED 27 |
27-02-2025 |
01-01-2025 |
6
|
| 96. |
MED 27 : WG01 |
UPVC Riser Pipe in Deepwell Handpumps |
27-02-2025 |
01-01-2025 |
0
|
| 97. |
MED 28 : WG01 |
To formulate Indian Standard on Smart Vibration Monitoring Terminal |
23-12-2024 |
01-01-2024 |
0
|
| 98. |
MED 29 : WG01 |
Review of IS 1610:2018 Household sewing machines - General requirements |
21-08-2024 |
31-12-2024 |
6
|
| 99. |
MED 29 : WG02 |
NWIP: Embroidery Sewing Machine |
21-08-2024 |
31-12-2024 |
5
|
| 100. |
MED 29 : WG03 |
NWIP: SINGLE NEEDLE LOCK STITCH INDUSTRIAL SEWING MACHINE |
21-08-2024 |
31-12-2024 |
3
|
| 101. |
MED 29 : WG04 |
Review and revise( if needed) of indian standard |
09-05-2025 |
08-05-2026 |
2
|
| 102. |
MED 29 : WG05 |
This standard will define and classify feed mechanisms used in multi-needle industrial sewing machines, covering:
• Types of feed mechanisms (drop feed, differential feed, compound feed, etc.)
• Feed uniformity across multiple needles
• Dimensional specifications (needle spacing, feed dog geometry, etc.)
• Motion tolerances, speed ratings, and fabric handling
• Test methods and performance parameters
• Guidelines for calibration, maintenance, and mechanical safety |
02-07-2025 |
02-07-2027 |
4
|
| 103. |
MED 30 : WG01 |
Flexible graphite material, Oxidation test for flexible graphite material, and gasket installation |
01-01-2025 |
31-12-2029 |
3
|
| 104. |
MED 30 : WG02 |
The scope of oxidation tests for flexible graphite materials typically involves measuring the mass loss of the material when exposed to oxidizing conditions, usually at elevated temperatures. This helps determine the material's resistance to degradation and its suitability for specific applications. |
27-05-2025 |
27-05-2025 |
3
|
| 105. |
MED 30 : WG03 |
The scope of a "Procedure for Cutting Gaskets" encompasses various methods and considerations for accurately and efficiently cutting gasket material to specific shapes and sizes. This includes understanding different cutting technologies, preparing designs, and optimizing parameters for a successful cut. |
27-05-2025 |
27-05-2025 |
3
|
| 106. |
MED 32 : WG01 |
NWIP: Thermal Imaging Camera |
30-09-2024 |
31-12-2024 |
0
|
| 107. |
MED 32 : WG02 |
High Speed Camera |
27-05-2025 |
26-05-2027 |
1
|
| 108. |
MED 33 : WG03 |
Continuous revision and updation of IS 1660 |
27-02-2025 |
01-01-2025 |
14
|
| 109. |
MED 33 : WG05 |
Maintenance and continuous updation of IS 2347 |
27-02-2025 |
01-01-2025 |
14
|
| 110. |
MED 33 : WG18 |
Preparation of working draft on Cast Iron Cookware |
27-02-2025 |
01-01-2025 |
8
|
| 111. |
MED 33 : WG01 |
To develop standard on Steel Chopping Boards - Specification |
06-05-2025 |
06-11-2027 |
5
|
| 112. |
MED 33 : WG02 |
To develop standard on Metals Straws |
06-05-2025 |
30-11-2027 |
4
|
| 113. |
MED 33 : WG04 |
To develop standard on Wet grinder (for idli batter) |
06-05-2025 |
30-11-2027 |
5
|
| 114. |
MED 33 : WG06 |
To develop standard on Dough Maker Machine |
06-05-2025 |
06-11-2028 |
0
|
| 115. |
MED 37 : WG01 |
Develop standards on Well head instrumentation for coal bed methane for Turbine meter and cone meter |
21-02-2025 |
31-03-2026 |
3
|
| 116. |
MED 38 : WG01 |
EN 13617-1:2012 - Petrol Filling Stations - Part 1: Safety requirements for construct |
27-02-2025 |
01-01-2025 |
10
|
| 117. |
MED 38 : WG02 |
ISO 16924:2016 - Natural gas fuelling stations — LNG stations for fuelling vehicles |
27-02-2025 |
01-01-2025 |
9
|
| 118. |
MED 38 : WG03 |
EN 13012 -"PETROL FILLING STATIONS-CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES" |
27-02-2025 |
01-01-2025 |
7
|
| 119. |
MED 38 : WG05 |
ISO 16923-2016-Natural gas Fuelling stations-CNG Stations for Fuelling vehicles |
27-02-2025 |
01-01-2025 |
8
|
| 120. |
MED 38 : WG06 |
ISO 12617:2015-Road Vehicles-Liquefied Natural Gas (LNG)-Refuelling Connector |
27-02-2025 |
01-01-2025 |
7
|
| 121. |
MED 40 : WG02 |
Working on Gap Areas of Standardization in the Safety of Machinery aspect of Indian Industries. |
01-03-2025 |
01-01-2025 |
8
|