| 1. |
MTD 03 : WG01 |
Contribute to the development of standard under development ISO 6892-5 at ISO and recommend its adoption as Indian Standard with required modification or toto. Participate in the works of ISO TC 164 SC1 WG 4 related to miniature testing. |
01-03-2024 |
01-03-2024 |
4
|
| 2. |
MTD 03 : WG02 |
Revision of IS IS 17795 : 2022 / ISO 204 : 2018 Metallic materials — Uniaxial creep testing in tension — Method of test |
10-05-2024 |
31-03-2025 |
3
|
| 3. |
MTD 03 : WG03 |
Revision of Standards on Knoop hardness |
20-12-2024 |
31-03-2025 |
3
|
| 4. |
MTD 03 : WG04 |
Review of allocation on VICKERS HARDNESS |
20-12-2024 |
31-03-2025 |
3
|
| 5. |
MTD 03 : WG05 |
Review of standards on biaxial testing |
20-12-2024 |
28-02-2025 |
2
|
| 6. |
MTD 03 : WG06 |
Review of testing standards of sheet and strip |
20-12-2024 |
20-12-2024 |
3
|
| 7. |
MTD 03 : WG07 |
Review of standards on Charpy Impact testing |
20-12-2024 |
20-12-2024 |
3
|
| 8. |
MTD 03 : WG08 |
Revision of IS 17418 : 2020 ISO 16842 : 2014 Metallic Materials - Sheet and Strip - Biaxial Tensile Testing Method Using a Cruciform Test Piece |
20-12-2024 |
31-03-2026 |
3
|
| 9. |
MTD 04 : WG01 |
Working group for addressing Sustainability in the field of manufacturing of Steel Products |
23-10-2024 |
22-10-2025 |
5
|
| 10. |
MTD 04 : P11 : WG4 |
Third revision of IS 5872 |
14-11-2024 |
14-11-2024 |
3
|
| 11. |
MTD 04 : P11 : WG2 |
Second revision of IS 2507 |
12-11-2024 |
12-11-2024 |
2
|
| 12. |
MTD 04 : P29 : WG1 |
To review IS 4882 : 1979 |
06-12-2024 |
06-12-2024 |
2
|
| 13. |
MTD 04 : P11 : WG1 |
To revise IS 17404 : 2020 |
12-11-2024 |
12-11-2024 |
2
|
| 14. |
MTD 04 : P7 : WG1 |
Revision of IS 11587 |
12-11-2024 |
12-11-2024 |
2
|
| 15. |
MTD 04 : P7 : WG2 |
Revision of IS 2062 : 2011 |
12-11-2024 |
12-11-2024 |
1
|
| 16. |
MTD 04 : P4 : WG1 |
Revision of IS 1875 : 1992 |
12-11-2024 |
12-11-2024 |
1
|
| 17. |
MTD 04 : WG02 |
To address Sustainability in the field of manufacturing of Steel products ( IS 277 ) |
12-11-2024 |
12-11-2024 |
0
|
| 18. |
MTD 04 : WG03 |
addressing Sustainability in the field of manufacturing of Steel products ( IS 513 ) |
12-11-2024 |
12-11-2024 |
0
|
| 19. |
MTD 04 : WG04 |
To resolve comments on IS 18809 : 2024 |
12-11-2024 |
12-11-2024 |
6
|
| 20. |
MTD 04 : WG05 |
Guideline for Smart Manufacturing in Iron and Steel Industry |
19-03-2025 |
19-03-2025 |
2
|
| 21. |
MTD 05 : WG01 |
Revision of IS 2021 |
18-05-2022 |
31-03-2025 |
4
|
| 22. |
MTD 05 : WG02 |
Revision of IS 1171 Ferromanganese and IS 1470 Silicomanganese |
19-02-2024 |
31-03-2025 |
6
|
| 23. |
MTD 05 : WG03 |
Revision of IS 1170 Ferrochromium |
19-02-2024 |
31-03-2025 |
5
|
| 24. |
MTD 05 : WG04 |
Revision of IS 4182 - Specification for misch metal |
19-02-2024 |
31-03-2025 |
2
|
| 25. |
|
Revision of IS 1110 Ferrosilicon |
18-05-2024 |
31-03-2025 |
6
|
| 26. |
|
To revise IS 1171 & IS 1470 |
03-10-2024 |
03-10-2024 |
3
|
| 27. |
MTD 05 : WG06 |
Revision of IS 2301 - Metallic silicon - Specification |
03-10-2024 |
03-10-2024 |
3
|
| 28. |
MTD 05 : P2 : WG1 |
Revision of IS 1170 - Ferrochromium - Specification |
03-10-2024 |
03-10-2024 |
5
|
| 29. |
MTD 05 : P2 : WG2 |
Revision of IS 1171 & 1470 |
03-10-2024 |
03-10-2024 |
4
|
| 30. |
MTD 05 : P3 : WG1 |
Formulation of standard on NPI |
03-10-2024 |
03-10-2024 |
7
|
| 31. |
MTD 05 : P3 : WG2 |
Revision of IS 1466 - Specification for ferrovanadium |
03-10-2024 |
03-10-2024 |
5
|
| 32. |
MTD 05 : P3 : WG3 |
Revision of IS 1469 - Ferromolybdenum - Specification |
03-10-2024 |
03-10-2024 |
2
|
| 33. |
MTD 05 : P3 : WG4 |
Revision of IS 1467 - Ferrotungsten - Specification |
03-10-2024 |
03-10-2024 |
3
|
| 34. |
MTD 05 : P3 : WG5 |
Revision of IS 3013 - Ferroboron - Specification |
03-10-2024 |
03-10-2024 |
3
|
| 35. |
MTD 06 : WG01 |
The working group is tasked with the revision of IS 8329 (Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification) |
01-10-2024 |
31-08-2025 |
5
|
| 36. |
MTD 06 : WG02 |
The working group is tasked with the standardization in the field of Cast Iron Fittings/Joints |
01-10-2024 |
31-12-2025 |
0
|
| 37. |
MTD 06 : WG03 |
Revision of IS 10207 |
01-10-2024 |
31-12-2025 |
1
|
| 38. |
MTD 06 : WG04 |
Working Group for Revision of IS 11606 |
01-10-2024 |
31-12-2025 |
1
|
| 39. |
MTD 06 : WG05 |
Working Group for Revision of IS 12988 |
01-10-2024 |
31-12-2025 |
1
|
| 40. |
MTD 06 : WG06 |
Working Group for Revision of IS 5789 |
01-10-2024 |
31-12-2025 |
1
|
| 41. |
MTD 07 : WG01 |
Revision of IS 9612 : Specification for Aluminium Tubes for Refrigeration Purposes |
29-08-2024 |
29-08-2024 |
3
|
| 42. |
MTD 07 : WG02 |
Revision of IS 733 ; Specification for Wrought Aluminium Bars, Rods and Sections ( Non Hollow ) : For General Engineering Purposes. |
29-08-2024 |
29-08-2024 |
3
|
| 43. |
MTD 07 : WG03 |
Working Group For Revision of Aluminium Foil for Food Packaging |
29-08-2024 |
29-08-2024 |
11
|
| 44. |
MTD 07 : WG04 |
Revision of IS 2066 : Classification of Aluminium Scrap |
02-09-2024 |
31-03-2025 |
9
|
| 45. |
MTD 07 : WG05 |
Revision of primary products IS 2590, IS 11890 and IS 6754 |
08-10-2024 |
08-10-2024 |
9
|
| 46. |
MTD 07 : WG06 |
Revision of IS 16011 |
08-10-2024 |
08-10-2024 |
11
|
| 47. |
MTD 07 : WG07 |
Working Group For Revision of IS 10259, IS 736 and IS 738 |
08-10-2024 |
08-10-2024 |
0
|
| 48. |
MTD 07 : WG08 |
Working Group for Revision of IS 734 Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision) |
09-10-2024 |
31-10-2025 |
0
|
| 49. |
MTD 07 : WG9 |
Billet and Slabs of Aluminium and Aluminium alloys ( wrought grades) |
11-10-2024 |
31-10-2025 |
3
|
| 50. |
MTD 07 : WG10 |
Aluminium Cladding : Specification |
11-10-2024 |
31-10-2025 |
1
|
| 51. |
MTD 07 : WG11 |
Specification of Aluminium Fin stock, Closure stock, Composite panel stock, |
11-10-2024 |
11-10-2024 |
5
|
| 52. |
MTD 07 : WG12 |
Working group for addressing Sustainability in the field of manufacturing of Aluminium Ingots |
23-10-2024 |
23-10-2024 |
0
|
| 53. |
MTD 07 : WG13 |
Review of IS 11861, IS 11901, IS 11902, IS 12389, IS 12442, IS 12644, IS 12828, IS 7882, IS 7883, IS 8513, IS 8514, IS 8515, IS 8560, IS 8561, IS 8937 and IS 8938 |
01-04-2024 |
31-12-2024 |
0
|
| 54. |
MTD 07 : WG14 |
Working Group Revision for IS 11890 |
31-01-2025 |
31-01-2026 |
0
|
| 55. |
MTD 07 : WG15 |
Working Group Revision for IS 1254 |
31-01-2025 |
31-01-2026 |
0
|
| 56. |
MTD 07 : WG16 |
Working Group Revision for IS 1284 |
31-01-2025 |
31-01-2026 |
0
|
| 57. |
MTD 07 : WG17 |
Working Group Revision for IS 15392 |
31-01-2025 |
31-01-2026 |
0
|
| 58. |
MTD 07 : WG18 |
Working Group Revision for IS 16011 |
31-01-2025 |
31-01-2026 |
0
|
| 59. |
MTD 07 : WG19 |
Working Group Revision for IS 2067 |
31-01-2025 |
31-01-2026 |
0
|
| 60. |
MTD 07 : WG20 |
Working Group Revision for IS 21 |
31-01-2025 |
31-01-2026 |
0
|
| 61. |
MTD 07 : WG21 |
Working Group Revision for IS 2590 |
31-01-2025 |
31-01-2026 |
0
|
| 62. |
MTD 07 : WG22 |
Working Group Revision for IS 6751 |
31-01-2025 |
31-01-2026 |
0
|
| 63. |
MTD 07 : WG23 |
Working Group Revision for IS 737 |
31-01-2025 |
31-01-2026 |
0
|
| 64. |
MTD 07 : WG24 |
Working Group Revision for IS 7793 |
31-01-2025 |
31-01-2026 |
0
|
| 65. |
MTD 07 : WG25 |
Working Group Revision for SP 1 |
31-01-2025 |
31-01-2026 |
0
|
| 66. |
MTD 07 : WG26 |
New Standard on Aluminium Foil For General Purpose |
24-02-2025 |
24-02-2025 |
0
|
| 67. |
MTD 07 : WG27 |
Revision of IS 1253:1992; Aluminium foruse in Iron and Steel Manufacture |
24-02-2025 |
31-03-2026 |
3
|
| 68. |
MTD 07 : WG28 |
Working Group For revision of IS 5082:1998;Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications |
24-02-2025 |
24-02-2025 |
3
|
| 69. |
MTD 07 : WG29 |
Working Group for revision of IS 734 ;Specification for wrought aluminium and aluminium alloy forging stock and forgings (For General Engineering Purposes) |
24-02-2025 |
24-02-2025 |
2
|
| 70. |
MTD 07 : WG30 |
Working For revision of IS 739 and IS 740 |
24-02-2025 |
24-02-2026 |
1
|
| 71. |
MTD 07 : WG31 |
Working Group for revision of IS 6694 |
24-02-2025 |
24-02-2025 |
2
|
| 72. |
MTD 07 : WG32 |
Working Group For New Standard on Specification for Aluminium hard alloy Plates sheets and coils |
27-02-2025 |
31-03-2026 |
1
|
| 73. |
MTD 08 : WG01 |
This working group has been created to revise IS 10773 : 1995 |
17-07-2023 |
31-03-2025 |
5
|
| 74. |
MTD 08 : WG02 |
This working group has been created to revise IS 191 : 2007. |
19-01-2024 |
31-03-2025 |
6
|
| 75. |
MTD 08 : WG03 |
To revise IS 12444. |
06-08-2024 |
31-03-2025 |
3
|
| 76. |
MTD 08 : WG04 |
To revise IS 613. |
06-08-2024 |
31-03-2025 |
3
|
| 77. |
MTD 08 : WG05 |
To revise IS 1545 and IS 2501 |
17-12-2024 |
17-12-2024 |
2
|
| 78. |
MTD 08 : WG06 |
This working group has been ceated to revise IS 28 : 1985 |
17-12-2024 |
17-12-2024 |
0
|
| 79. |
MTD 09 : WG02 |
Revision of IS 1921 : 2005 |
27-05-2024 |
27-05-2024 |
3
|
| 80. |
MTD 09 : P6 : WG1 |
To draft the standard for solder pastes and flux classification by studying the reports submitted by BIS intern and relevant international standards like IPC, IEC JIS etc keeping in view our current industrial practices. |
19-11-2024 |
10-08-2025 |
0
|
| 81. |
MTD 09 : P2 : WG1 |
Formulation of new indigenous standard on CGG Zinc alloy ingots by reviewing the reports and rough draft submitted by BIS Intern and by taking assistance from relevant international standards like ASTM B852 and keeping in view the Indian industry requirements. |
19-11-2024 |
15-08-2025 |
0
|
| 82. |
|
Review the existing standards on zinc alloy ingots and die castings vis-a-vis the international/national standards avaliable like ISO , ASTM , AS, JIS |
31-12-2024 |
31-07-2025 |
6
|
| 83. |
MTD 10 : WG01 |
Review of Gold standards - IS 1417 & IS 1418 |
28-11-2024 |
28-11-2024 |
6
|
| 84. |
MTD 10 : WG02 |
Review of Silver standards - IS 2112 & IS 2113 |
28-11-2024 |
28-11-2024 |
5
|
| 85. |
MTD 10 : WG03 |
Study of ISO Standard on Spark OES ISO 18214 : 2024 |
28-11-2024 |
28-11-2024 |
4
|
| 86. |
MTD 10 : WG04 |
Review of Standards on Diamond- IS 15766 (Part 1) and IS 15766 (Part 2) |
28-11-2024 |
31-03-2026 |
4
|
| 87. |
MTD 10 : WG05 |
Review of IS 17278 - Refined Gold and Silver Bars for Good Delivery Specification |
28-11-2024 |
31-08-2025 |
0
|
| 88. |
MTD 10 : WG06 |
Revision of standards on Palladium |
01-11-2024 |
31-12-2025 |
0
|
| 89. |
MTD 10 : WG07 |
Revision of standards on Palladium (due for 2024-25) |
01-11-2024 |
31-12-2025 |
1
|
| 90. |
MTD 10 : WG08 |
Revision of standards on Gold (due for 2024-25) |
01-11-2024 |
31-12-2025 |
1
|
| 91. |
MTD 10 : WG9 |
Revision of standards on Silver (due for 2024-25) |
01-10-2024 |
31-12-2025 |
1
|
| 92. |
MTD 11 : WG01 |
This working group has been created to revise IS 5206. |
06-09-2024 |
31-03-2025 |
1
|
| 93. |
MTD 11 : WG02 |
This working group has been created to revise IS 5897 : 1985. |
06-09-2024 |
31-03-2025 |
1
|
| 94. |
MTD 11 : WG03 |
This working group has been created to revise IS 5511 : 1991. |
06-09-2024 |
31-03-2025 |
1
|
| 95. |
MTD 11 : WG04 |
This working group has been created to revise IS 11368 (Part 1) : 1985. |
06-09-2024 |
31-03-2025 |
1
|
| 96. |
MTD 11 : WG05 |
To formulate standard on Tubular cored electrodes for welding of stainless and heat-resisting steels |
13-12-2024 |
13-12-2024 |
0
|
| 97. |
MTD 11 : WG06 |
To formulate standard on tubular cored electrodes for welding of high strength steels |
13-12-2024 |
13-12-2024 |
0
|
| 98. |
MTD 11 : WG07 |
To formulate standard on Fluxes for submerged arc welding and electroslag welding |
13-12-2024 |
13-12-2024 |
1
|
| 99. |
MTD 11 : WG08 |
This working group has been created to revise IS 1395 : 1982. |
13-12-2024 |
13-12-2024 |
1
|
| 100. |
MTD 11 : WG9 |
This working group has been created to revise IS 5898 : 1970. |
13-12-2024 |
13-12-2024 |
1
|
| 101. |
MTD 11 : WG10 |
This working group has been created to revise IS 7303 : 1974. |
13-12-2024 |
13-12-2024 |
1
|
| 102. |
MTD 11 : WG11 |
This working group has been created to revise IS 8666 : 1977. |
13-12-2024 |
13-12-2024 |
1
|
| 103. |
MTD 11 : WG12 |
This working group has been created to revise IS 1278 : 1972. |
13-12-2024 |
13-12-2024 |
1
|
| 104. |
MTD 11 : WG13 |
This working group has been created to revise IS 5857 : 1970. |
13-12-2024 |
13-12-2024 |
1
|
| 105. |
MTD 11 : WG14 |
This working group has been created to revise IS 8736 : 1977. |
13-12-2024 |
13-12-2024 |
1
|
| 106. |
MTD 11 : WG15 |
This working group has been created to revise IS 814 : 2004. |
13-12-2024 |
13-12-2024 |
1
|
| 107. |
MTD 11 : WG16 |
This working group has been created to formulate standard on tubular cored electrodes welding of non alloy and fine grain steels. |
13-12-2024 |
13-12-2024 |
1
|
| 108. |
MTD 11 : WG17 |
This working group has been created to formulate standard on Covered electrodes for manual metal arc welding of creep-resisting steels. |
13-12-2024 |
13-12-2024 |
1
|
| 109. |
MTD 11 : WG18 |
This working group has been created to formulate test method standards used in Welding Industry. |
04-04-2025 |
04-04-2025 |
0
|
| 110. |
MTD 13 : P3 : WG1 |
For the revision of IS 14795 : 2000 “Method for determination of clustering of iron oxide feedstock for direct reduction processes” and IS 11284: 1985 “Method Of Rotary Tube Test for Iron Bearing Materials for the Manufacture of Sponge Iron direct Reduced Iron DRI”. |
15-09-2024 |
08-10-2024 |
0
|
| 111. |
MTD 13 : P1 : WG1 |
Formulation of new standard on Terminology of Iron Ores ( Lump/ Processed) and DRI . The standard shall encompass definitions for sampling, sample preparation, moisture and particle size analysis and physical testing of iron ore and direct reduced iron. |
20-09-2024 |
31-12-2025 |
2
|
| 112. |
MTD 13 : P1 : WG2 |
1. To Review all the three indigenous standards on sampling of iron ores namely IS 1405( Sampling for Fines and Lump Ores), IS 9101( Sampling of Pellets) and IS 11607 (Sampling of Sinters) vis-a-vis ISO 3082 : 2017 and submit a comparative report between these three indigenous standards and ISO 3082. Suggest improvizations or changes in the already existing Indigenous Standards if we cannot adopt ISO 3082.
2. Further to recommend whether we can adopt ISO 3082 : 2017 and supersede the already existing standards. Further to provide comments on ISO 3082 due to which India (BIS) is not able to adopt the standards and recommend the changes required in ISO 3082 so that we can adopt the ISO 3082 : 2017 standard. |
26-11-2024 |
26-11-2024 |
7
|
| 113. |
MTD 13 : P1 : WG3 |
1. To review IS 13344 vis-a-vis IS 15944/ISO 3086 and recommend whether both these standards are same/different. Further to recommend whether IS 13344 can be withdrawn as this indigenous standard was formulated based on ISO 3086 ( ASSISTANCE DERIVED) and ISO 3086 is adopted as IS 15944.
2. To recommend whether the ISO 3084 (Experimental methods for evaluation of quality variation of iron ores) and ISO 3085 (Iron ores - Experimental methods for checking the precision of sampling, sample preparation and measurement) standards are really required for the Indian Industry and whether they can be adopted. |
26-11-2024 |
26-11-2024 |
2
|
| 114. |
MTD 13 : P1 : WG5 |
1.Revision of IS 8604: 1977 Method for determination of compression strength of iron ore pellets after reduction (to address the comment so received from RDCIS SAIL to replace the 10 kN with 5kN and give final suggestions/recommendation/revised draft ).
2.To find, if there is any related Indian standard to ISO 7992:2022 “Iron ores for blast furnace feedstocks — Determination of reduction under load” to do a comparative study between them and submit recommendations/comparative report on the adoption of this ISO standard.
3.To do a comparative study of Indian standard IS 8625 : 1986 Determination of crushing strength of iron ore pellets (First Revision) vis-à-vis ISO 4700 : 2015 “Iron ore pellets for blast furnace and direct reduction feedstocks — Determination of the crushing strength” and submit the comparative report along with final recommendations on the adoption of this ISO standard. |
17-03-2025 |
31-03-2026 |
7
|
| 115. |
MTD 13 : P1 : WG6 |
1.To review of IS 14795 “Method for determination of clustering of iron oxide feedstock for direct reduction processes” .
2.To review IS 11284: 1985 vis-à-vis ISO standard ISO 11257:2022 “Iron ores for shaft direct-reduction feedstock’s — Determination of the low-temperature reduction-disintegration index and degree of metallization “ and ISO 11258:2015 “Iron ores for shaft direct-reduction feedstock’s — Determination of the reducibility index, final degree of reduction and degree of metallization” and submit their comparative report on IS and ISO standards/recommendation on adoption of ISO standards. |
18-03-2025 |
31-03-2026 |
9
|
| 116. |
MTD 13 : P1 : WG7 |
To formulate new Indian Standard on method of determination of angle of repose for Iron ores fines in bulk by taking assistance from International Maritime Solid Bulk Cargoes Code, 2023 in which the method has been explicitly described. |
17-03-2025 |
31-03-2026 |
7
|
| 117. |
MTD 13 : P1 : WG8 |
To review and compare IS 11336: 1985 - Guidelines for heat-hardened iron ore pellets for iron making in blast furnaces along with GB/T 27692 : 2024 Iron pellets for blast furnace and give comparative report/recommendation/revised draft. |
18-03-2025 |
31-03-2026 |
10
|
| 118. |
MTD 13 : P1 : WG9 |
To propose the formulation of standard at ISO on “Determination of shatter index of iron ore lumps, sinters, and pellets” as that of our indigenous Indian standard IS 9963: 1981 and to fill the form 4 regarding its significance, users etc for the same. |
18-03-2025 |
31-03-2026 |
4
|
| 119. |
MTD 13 : P1 : WG10 |
Review of IS 10823:2018 – Methods for determining the Thermal Degradation Index (TDI) and Reduction Degradation Index (RDI) of iron ores (lump ores, sinter, and pellets) vis-a-vis ISO standards to recommend whether ISO standards can be adopted or the procedure given in IS 10823 is different altogether from ISO standards |
26-11-2024 |
26-11-2024 |
2
|
| 120. |
MTD 15 : WG03 |
Refractory Test Piece Preparation via Gunning Techniques and for looking after documents prepared by ISO WG 25. |
15-09-2024 |
08-10-2024 |
1
|
| 121. |
MTD 15 : P4 : WG1 |
Formulation of new Standard on Specification of Silica Ramming Mass |
28-02-2025 |
28-02-2025 |
4
|
| 122. |
MTD 15 : P4 : WG2 |
To revise IS 1528 (PART 14), IS 1528 (Part 7) and to formulate new standard on physical test methods of DVM. |
28-02-2025 |
31-03-2026 |
7
|
| 123. |
MTD 15 : P2 : WG1 |
To formulation of new standard on classification standards on Basic dense shaped Refractory Product. |
28-02-2025 |
31-03-2026 |
3
|
| 124. |
MTD 15 : P3 : WG1 |
To review the progress of R&D project so allocated for identification of critical parameters for classification standard on insulating bricks. |
28-02-2025 |
31-03-2026 |
5
|
| 125. |
MTD 15 : P2 : WG2 |
To review and revise IS 1528 Part 2 Methods of sampling and physical tests for refractory materials: Part 2 determination of refractoriness under load (Second Revision) |
28-02-2025 |
31-03-2026 |
3
|
| 126. |
MTD 16 : WG20 |
Study of quality requirements of grades of Hot-rolled and cold rolled Stainless Steels used for structural purposes |
21-10-2024 |
21-10-2024 |
6
|
| 127. |
MTD 16 : WG21 |
IS 3261:1980 - Study of quality requirements of carbon steel forgings for shipbuilding industry. |
21-10-2024 |
13-11-2024 |
4
|
| 128. |
MTD 16 : WG9 |
Revision of IS 9294 : 2023 |
14-11-2024 |
14-07-2025 |
0
|
| 129. |
MTD 16 : WG04 |
Revision of IS 5517:1993 Steel for hardening and tempering |
14-11-2024 |
14-07-2025 |
8
|
| 130. |
MTD 16 : WG03 |
Revision of IS 11169 (Part 1) |
21-11-2024 |
21-03-2025 |
8
|
| 131. |
MTD 16 : WG05 |
Revision of IS 6911 : 2017 |
27-11-2024 |
27-05-2025 |
11
|
| 132. |
MTD 16 : WG08 |
Revision of IS 12045 : 1987 |
27-11-2024 |
27-08-2025 |
6
|
| 133. |
MTD 16 : WG07 |
Formulation of new standard on Induction tempered spring steel wire. |
27-11-2024 |
27-04-2025 |
15
|
| 134. |
MTD 16 : WG18 |
Revision of IS 14698 : 1999 |
27-11-2024 |
27-07-2025 |
3
|
| 135. |
MTD 16 : WG19 |
IS 3748 : 2022 Tool steel - specification |
27-11-2024 |
27-06-2025 |
6
|
| 136. |
MTD 16 : WG12 |
Review of IS 12146 : 1987 Specification for carbon manganese steel forgings for pressure vessels. |
28-02-2025 |
28-02-2025 |
1
|
| 137. |
MTD 16 : WG06 |
Review of IS 2611: 1964 & IS 9683 to be merged into IS 2611 : 1964 in line with BS EN 10222-2. |
28-02-2025 |
28-02-2025 |
1
|
| 138. |
MTD 16 : WG13 |
Review of IS 12145 : 1987 Specification for carbon manganese steel forgings for pressure vessels. |
28-02-2025 |
28-02-2025 |
2
|
| 139. |
MTD 16 : WG14 |
Review of IS 4431 : 1978 Specification for carbon and carbon manganese free cutting steels |
28-02-2025 |
28-02-2025 |
2
|
| 140. |
MTD 16 : WG15 |
Review of IS 9516 : 1980 Specification for heat resisting steels |
28-02-2025 |
28-02-2025 |
2
|
| 141. |
MTD 16 : WG17 |
New Proposal to develop an Indian Standard on Higher-Strength Stainless Steel Plate, Sheet and Strip for Bridge and Other Structural Applications- Specification. |
28-02-2025 |
28-02-2025 |
4
|
| 142. |
MTD 19 : WG01 |
The working group is tasked with the revision of IS 6630 |
18-09-2024 |
31-03-2026 |
1
|
| 143. |
MTD 19 : WG02 |
The working group is tasked with the revision of IS 3589 (Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification) |
01-10-2024 |
31-03-2026 |
10
|
| 144. |
MTD 19 : WG03 |
The working group is tasked with the revision of IS 11714 : PART 1 to 5 (Specification for steel tubes for heat exchangers). |
01-10-2024 |
31-03-2026 |
2
|
| 145. |
MTD 19 : WG04 |
The working group is tasked with the revision of IS 12791 : 1989 (High carbon chromium bearing steel tubes for the manufacture of bearing races - Specification) |
01-10-2024 |
31-03-2026 |
1
|
| 146. |
MTD 19 : WG05 |
The working group is tasked with the revision of IS 6630 (Seamless ferritic alloy steel pipes for high temperature steam services - Specification) |
01-10-2024 |
31-03-2026 |
1
|
| 147. |
MTD 19 : WG06 |
The working group is tasked with development of Indigenous standard on "SS Pipes for water application" |
01-10-2024 |
31-03-2026 |
1
|
| 148. |
MTD 19 : WG07 |
The working group is tasked with development of Indigenous standard on "SS Pipes for decorative application" |
01-10-2024 |
31-03-2026 |
1
|
| 149. |
MTD 19 : WG08 |
Development of Indigenous Standard on Single Wall Copper and Zinc Coated Steel Condenser Tubes |
01-09-2024 |
30-06-2025 |
1
|
| 150. |
MTD 19 : WG9 |
The working group is tasked with development of Indigenous standard on "Black and Hot-Dipped, Zinc-Coated Seamless Steel Pipe" |
28-04-2025 |
31-03-2026 |
2
|
| 151. |
MTD 21 : WG01 |
Leak Testing |
21-02-2025 |
31-03-2025 |
1
|
| 152. |
MTD 21 : WG02 |
Personnel qualification |
21-02-2025 |
31-03-2025 |
4
|
| 153. |
MTD 21 : WG03 |
Thermographic testing |
21-02-2025 |
31-03-2025 |
3
|
| 154. |
MTD 21 : WG04 |
Acoustic emission testing |
21-02-2025 |
31-03-2025 |
1
|
| 155. |
MTD 21 : WG05 |
Surface methods |
21-02-2025 |
31-03-2025 |
1
|
| 156. |
MTD 21 : WG06 |
Ultrasonic testing |
21-02-2025 |
31-03-2025 |
2
|
| 157. |
MTD 21 : WG07 |
Eddy current testing |
21-02-2025 |
31-03-2025 |
3
|
| 158. |
MTD 21 : WG08 |
Radiographic testing |
21-02-2025 |
31-03-2025 |
3
|
| 159. |
MTD 21 : WG9 |
Working Group for new subject : EVALUATION OF THE INTEGRITY OF VARIOUS SHIELDING STRUCTURES BY USING GAMMATOGRAPHY TECHNIQUE |
27-02-2025 |
27-02-2025 |
1
|
| 160. |
MTD 21 : WG10 |
WG : Non-destructive testing Eddy Current TestingDetermination of Electrical Conductivity of Non-magnetic Metals |
27-02-2025 |
15-03-2025 |
1
|
| 161. |
MTD 21 : WG11 |
Procedure for Ultrasonic Testing (UT) for detection and characterization of IGSCC flaws in piping |
01-03-2025 |
01-03-2025 |
1
|
| 162. |
MTD 22 : WG01 |
Revision of IS 1956 (Part 1) : 1976 |
24-01-2025 |
24-01-2025 |
2
|
| 163. |
MTD 22 : WG02 |
Revision of IS 7739 (Part 2): 1975 |
24-01-2025 |
24-01-2025 |
2
|
| 164. |
MTD 24 : WG01 |
Development of working draft on 'Coating and Wrapping of Underground Mild Steel Pipelines: Bituminous Hot Melt Enamel Coatings' and 'Coating and Wrapping of Underground Mild Steel Pipelines – Specifications: Preformed Bituminous Wrapping Tapes' and recommendation to committee. Provide clarification of comments/queries on the draft. |
28-08-2024 |
19-09-2024 |
6
|
| 165. |
MTD 24 : WG02 |
Revision of IS 9077 : 1979 "Corrosion protection of steel reinforcement in RB and RCC construction" |
28-08-2024 |
30-11-2024 |
4
|
| 166. |
MTD 24 : WG03 |
Revision of IS 8062 (Part 2) : 2006 Cathodic protection of buried pipeline/ structure for transport |
28-08-2024 |
31-12-2024 |
4
|
| 167. |
MTD 24 : WG04 |
Revision of IS 2629 Code of Practice for Process Design Testing and Application of Hot Dip Galvanizing of Iron and Steel - Part 1 : Batch Process and IS 6745 Methods for determination of mass of zinc coating on zinc coated iron and steel articles |
28-08-2024 |
31-03-2025 |
2
|
| 168. |
MTD 24 : WG05 |
Revision of IS 3618 : 1966 Specification for Phosphate Treatment of Iron and Steel for protection against corrosion |
28-08-2024 |
31-03-2025 |
1
|
| 169. |
MTD 24 : WG06 |
Revision of IS 6745: 1972 Methods for determination of mass of zinc coating on zinc coated iron and steel articles |
12-02-2025 |
31-03-2026 |
4
|
| 170. |
MTD 24 : WG07 |
Adoption of ISO 10587:2000
Metallic and other inorganic coatings — Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods — Inclined wedge method |
28-08-2024 |
31-03-2026 |
5
|
| 171. |
MTD 26 : WG01 |
Revision of IS 17082 Guidelines for Design & Construction of Continuous pusher type coal/oil/gas fired reheating furnace |
29-06-2021 |
31-03-2025 |
4
|
| 172. |
MTD 26 : WG02 |
Revision of IS 12392 Code of practice for design manufacture and testing of metallic Recuperators |
19-07-2022 |
31-03-2025 |
4
|
| 173. |
MTD 26 : WG03 |
Revision of IS 16191 : 2014 - Safety for oil fired furnaces |
03-10-2024 |
03-10-2024 |
3
|
| 174. |
MTD 26 : WG04 |
Revision of IS 12253 |
10-01-2025 |
10-01-2025 |
4
|
| 175. |
MTD 34 : P1 : WG1 |
Working group for Chemical Analysis of Aluminium |
10-10-2024 |
31-12-2025 |
2
|
| 176. |
MTD 34 : WG02 |
Chemical Analysis of Ferroalloys |
10-10-2024 |
10-12-2025 |
4
|
| 177. |
MTD 34 : P4 : WG3 |
Chemical Analysis of Pig Iron |
10-10-2024 |
10-12-2025 |
5
|
| 178. |
MTD 34 : WG04 |
Chemical analysis of Iron Ores |
10-10-2024 |
10-12-2025 |
4
|
| 179. |
MTD 34 : WG05 |
Test method of steel
1 Gravimetric test method for determining silicon content in steel and cast iron(Adoption ISO 439)
2 Steel and cast iron Determination of nickel content Flame atomic absorption spectrometric method(ISO 4940 Adoption)
3 Steel Determination of nickel Dimethylglyoxime spectrophotometric method(ISO 4939 Adoption)
4 Steel Determination of silicon content Inductively coupled plasma atomic emission spectrometric method( ISO 17055 Adoption)
5 Steel and iron:Determination of sulfur content Infrared absorption method after combustion in an induction furnace( ISO 4935 adoption) |
11-10-2024 |
31-12-2025 |
4
|
| 180. |
MTD 34 : WG06 |
Review of Standards : 1) IS 14644 Part 1 2) IS 1493 Part 5 3) IS 1493 Part 6 4) IS 1493 Part 9 |
01-07-2024 |
31-01-2025 |
2
|
| 181. |
MTD 34 : WG07 |
Review of IS17319 , IS 17320, IS 17321,IS 17324, IS 17325, IS 17322, IS 17323 |
01-04-2024 |
31-03-2025 |
2
|
| 182. |
MTD 34 : WG08 |
Methods of Chemical analysis of Ferro-niobium |
01-04-2024 |
30-04-2025 |
2
|
| 183. |
MTD 34 : WG9 |
ICP - OES Test method of Iron Ores ; ISO 11535 |
28-10-2024 |
31-07-2025 |
2
|
| 184. |
MTD 34 : WG10 |
Test Method for Determination of Manganese, Chromium and Copper in ferronickel |
29-10-2024 |
29-10-2024 |
5
|
| 185. |
MTD 34 : WG11 |
Review of ISO 3815 Part 1 and ISO 3815 Part 2 :2005( Chemical analysis of Zinc) |
29-01-2025 |
29-01-2025 |
1
|
| 186. |
MTD 34 : WG12 |
Working Group for revision of IS 3685 ( Chemical Analysis of brasses) |
28-02-2025 |
27-02-2025 |
1
|
| 187. |
MTD 34 : WG14 |
Working Group For Revision of IS 1493 Part 4 |
27-02-2025 |
27-02-2025 |
0
|
| 188. |
MTD 34 : WG13 |
Working Group for New Standard onMethod of Chemical analysis of Wolframite concentrate (Tungsten ore) |
28-02-2025 |
28-02-2025 |
1
|
| 189. |
MTD 34 : WG15 |
Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel |
01-03-2025 |
01-04-2026 |
1
|