Published Standards :: Common Category

SI. No.	IS Number	Product	Features	Action
1.	IS 13429 (Part 1) : 2020	Solar Cooker — Box Type	This standard (Part 1) specifies the requirements of box type solar cookers for cooking. The solar cookers covered in this standard shall be of two grades depending upon their thermal performance (F1). a) Grade A — F1 shall not be less than 0.12, and b) Grade B — F1 shall not be less than 0.11. This standard also covers the assembly, workmanship, components, tests, instruction manual of cooker etc.	View IS Detail
2.	IS 12933 (Part 1) : 2003 Reviewed In : 2019	Solar flat plate collector - requirements	This standard (Part 1) specifies the requirements of solar flat plate collector for water heating. This standard does not apply to the following: a) Collector in whom heat transfer fluid may change phase, that is, the collectors designed for normal fluid temperature above 100cC with water as the heat transfer fluid; b) Concentrating	View IS Detail
3.	IS 12933 (Part 2) : 2003 Reviewed In : 2019	Solar flat plate collector - components	This standard (Part 2) specifies the requirements for various components of solar flat plate collector for water heating. This standard does not apply to the following: a) Collector in whom heat transfer fluid may change phase, that is, the collectors designed for normal fluid temperature above 100°C with water as the heat transfer fluid, b) Concentrating collectors, used in a system designed to generate mechanical energy/electricity, c) Collectors in which the thermal storage unit is an integral part of the collector so that the collection and the storage processes cannot be separated, d) Unglazed flat plate collector, e) Installation or mounting of solar collectors, and f) Tracking mechanism of the sun following the collector system.	View IS Detail
4.	IS 13152 (Part 1) : 2013 Reviewed In : 2024	Portable solid bio - Mass cookstove (Chulha)	This standard covers requirements of different designs and types of solid bio-mass portable cookstove (chulha) for domestic and community/commercial applications. This standard also covers the terminology, designs, types, sizes, materials, dimensions, tolerances, manufacture, workmanship etc. of the flat plate collector.	View IS Detail
5.	IS 9478 : 1989 Reviewed In : 2019	Family sized biogas plant	This standard covers the requirements for design and installation of family sized biogas plants for upto 10 m3/day. This standard includes types of bio gas plants, terminology, different models of biogas plants for different capacity, their design and construction, connections, testing, etc.	View IS Detail
6.	IS 17018 (Part 1) : 2022	Solar Photovoltaic Water Pumping Systems	This specification (Part 1) covers design qualifications and performance specifications for Centrifugal Solar Photovoltaic (SPV) Water Pumping Systems from 0.75 kW up to 7.5 kW to be installed on a suitable bore-well, open well, water reservoir, water stream, etc. This standard includes terminology, design, performance and safety features for solar photovoltaic water pumping systems and also prescribes the methods of measurement of performance and energy efficiency ratings.	View IS Detail
7.	IS 16542 : 2016 Reviewed In : 2021	Direct Insertion Type Storage Water Tank	This standard specifies requirements of direct insertion type storage water tank of water capacity up to 500 litres for use with all glass evacuated tubes solar collector. This standard covers only vented type storage water tank, main parts of storage water tank, general requirements, test requirements etc.	View IS Detail
8.	IS 16543 : 2016 Reviewed In : 2021	All glass evacuated solar collector tubes	This standard specifies requirements of all glass evacuated solar collector tubes of non-concentrating type solar collector hot water output up to 80°C. This standard also covers the dimensions, tolerances of all glass evacuated solar collector tubes, general requirements, appearance, dimensions of solar collector etc.	View IS Detail
9.	IS 16544 : 2016 Reviewed In : 2021	All glass evacuated tubes solar water heating system	This standard specifies requirements of all glass evacuated tubes solar water heating system. This standard covers only non-concentrating, direct, vented solar collector system based on thermosyphon principle. This standard do not apply to solar water heating systems which have an auxiliary heater as an integral part of the system, since the operation of the auxiliary input may influence the performance of the system.	View IS Detail
10.	IS 14286 (Part 1) : 2019 IEC 61215-1:2021	Terrestrial photovoltaic (PV) modules	Design qualification and type approval of terrestrial photovoltaic (PV) modules suitable for long-term operation in general open-air climates.	View IS Detail
11.	IS 14286 (Part 1/Sec 1) : 2019 IEC 61215-1-1:2021	Crystalline silicon photovoltaic (PV) modules	Design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open air climates.	View IS Detail
12.	IS 14286 (Part 1/Sec 2) : 2019 IEC 61215-1-2:2021	Thin - Film cadmium telluride (CdTe) based photovoltaic (Pv) modules	This standard applies to all thin-film CdTe based terrestrial flat plate modules.	View IS Detail
13.	IS 14286 (Part 1/Sec 3) : 2019 IEC 61215-1-3:2021	thin - Film amorphous silicon based photovoltaic (PV) modules	This standard applies to all thin-film amorphous silicon (a-Si; a-Si/µc-Si) based terrestrial flat plate modules.	View IS Detail
14.	IS 14286 (Part 1/Sec 4) : 2019 IEC 61215-1-4:2021	Thin - Film Cu(In,ga)(S,se)2 based photovoltaic (Pv) modules	Design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open air climates. applies to all thin-film Cu(In,Ga) (S,Se)2 based terrestrial flat plate modules.	View IS Detail
15.	IS 16077 : 2013 IEC 61646 : 2008 Reviewed In : 2018	Thin - Film terrestrial photovoltaic (PV) modules	Design qualification and type approval of terrestrial, thin-film photovoltaic modules suitable for long-term operation in general open-air climates	View IS Detail
16.	IS 16169 : 2014 IEC 62116 : 2014	Utility - Interconnected photovoltaic inverters	Evaluation of the performance of islanding prevention measures used with utility- interconnected PV systems	View IS Detail
17.	IS 16221 (Part 2) : 2015 IEC 62109-2 : 2011 Reviewed In : 2020	Power Converters	Particular safety requirements relevant to d.c. to a.c. inverter products	View IS Detail
18.	IS/IEC 61400-22 : 2010 IEC 61400-22 : 2010 Reviewed In : 2023	Wind Turbines	Rules and procedures for a certification system for wind turbines	View IS Detail
19.	IS 16711 : 2017	ELVDC distribution system	Distribution of power from an extra low voltage 48 V d.c. power source.	View IS Detail
20.	IS 17017 (Part 2/Sec 6) : 2021	Electric Vehicle Conductive Charging System	These accessories are intended to be used for a DC interface of the conductive charging system, where the protection against electric shocks relies on electrical separation between the primary circuit and the secondary circuit of the EV supply equipment	View IS Detail
21.	IS 17017 (Part 22/Sec 1) : 2021	AC Charge Point for Light Electric Vehicle	This standard is applicable to Light Electric Vehicle AC Charge Point (LEV AC Charge Point), which is a basic conductive AC charging option for charging light electric road vehicles with rated supply voltage 240 V a.c. and current up to 16A a.c.	View IS Detail
22.	IS 17896 (Part 1) : 2022 IEC TS 62840-1:2016	General and Guidance for Electric Vehicle Battery Swap System	The purpose of the battery swap system is to provide energy partly or in total to electric road vehicles (EVs) through fast replacement of their swappable battery system (SBS). While charging, the EV typically takes a relatively long time, the battery swap process takes only a few minutes to complete.	View IS Detail
23.	IS 17896 (Part 2) : 2022 IEC 62840-2:2016	Safety Requirements Electric Vehicle Battery Swap System	This standard provides the safety requirements for a battery swap system, for the purposes of swapping swappable battery system (SBS) of electric vehicles.	View IS Detail
24.	IS 17855 : 2022 ISO 12405-4:2018	Battery Packs	Specifies test procedures for the basic characteristics of performance, reliability and electrical functionality for the battery packs and systems for either high-power or high-energy application. Unless otherwise stated, the test applies to both applications.	View IS Detail
25.	IS/ISO 12619-1 : 2014 ISO 12619-1 : 2014	Hydrogen Natural Gas Blends	This series of standards specify the basic requirements along with test methods for components of vehicle running on either Compressed Gaseous Hydrogen Fuel or Hydrogen Natural Gas Blends. The components include Pressure regulators, Check valves, Manual Cylinder Valves, Automatic Valves, Gas injector, Pressure Indicator, Pressure Relief Valves, Excess flow valve, Gas-tight housing and ventilation hoses, Rigid fuel line in stainless steel, Flexible fuel line, Filters and Fittings.	View IS Detail

Note 1 : For details of any specific Indian Standard, please access our Know your Standards feature on BIS website (www.bis.gov.in ) or BIS Care App

Note 2 : For complete list of Indian Standard, please go to our Published Standard feature of Standardization portal (www.manakonline.in).

Standards in Category :: Non-conventional energy