Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 9478:2023

IS Title/आईएस शीर्षक : Design, Construction, Installation and Operation of Biogas (Biomethane) Plant - Code of Practice (Third Revision)

Superseding IS/सुपरसीडिंग आईएस : IS 9478 : 1989

Degree of Equivalence/समतुल्यता स्तर : Indigenous

Number of Revisions/पुनरीक्षणों की संख्या : 3

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Code of Practice

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : MED (Mechanical Engineering Department)

Technical Committee/तकनीकी समिति : MED 04 (Renewable Energy Sources Sectional Committee)

Member Secretary/सदस्य सचिव : ANKITA VIDHYARTHI (SCIENTIST-D)

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 4

Click to download

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 9478:2023
:

1	IS 456:2000	Plain and reinforced concrete - Code of practice (Fourth Revision)	CED 02
2	IS 800:2007	General construction in steel - Code of practice (Third Revision)	CED 07
3	IS 875 (Part 1):2026	Code of practice for design loads (Other Than Earthquake) for buildings and structures: Part 1 dead loads - Unit weights of building materials and stored materials (Second Revision)	CED 37
4	IS 1079:2017	Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)	MTD 04
5	IS 1161:2014	Steel tubes for structural purposes - Specification (Fifth Revision)	MTD 19
6	IS 1905:1987	Structural use of unreinforced masonry - Code of practice (Third Revision)	CED 13
7	IS 2062 (Part 1):2025	Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)	MTD 04
8	IS 2379:2024	Pipelines - Identification - Colour code (First Revision)	MED 17
9	IS 2508:2024	Polyethylene films and sheets - Specification (Third Revision)	PCD 12
10	IS/ISO 21672-2:2012 ISO 21672-2:2012	Concrete Structures for Retaining Aqueous Liquids - Code of Practice : Part 1 General Requirements (Second Revision)	CED 02
11	IS/ISO/TR 22100-2:2013 ISO TR 22100-2:2013	Concrete Structures for Retaining Aqueous Liquids - Code of Practice : Part 2 Plain and Reinforced Concrete (Second Revision)	CED 02
12	IS 4923:1997	Hollow steel sections for structural use - Specification (Third Revision)	MTD 19
13	IS 4984:2016	Polyethylene Pipes for Water Supply - Specification (Fifth Revision)	CED 50
14	IS 5312 (Part 1):2004	Swing check type reflux (non-return) valves for water works purposes - Specification: Part 1 Single door pattern (second revision)	CED 03
15	IS 5312 (Part 2):2013	Swing Check Type Reflux (Non-Return) Valves for Water Works Purpose - Specification Part 2 : Multi-Door Pattern	CED 03
16	IS 5572:2009 IEC 60079-10:2002	Classification of hazardous areas (Other Than Mines) having flammable gases and vapours for electrical installation (Third Revision)	ETD 22
17	IS 6092 (Part 1):1985	Methods of sampling and test for fertilizers: Part 1 sampling (First Revision)	FAD 07
18	IS 6092 (Part 2/Sec 1):2004	Methods of sampling and test for fertilizers: Part 2 determination of nitrogen: Sec 1 introduction (Second Revision)	FAD 07
19	IS 6092 (Part 2/Sec 2):2004	Methods of sampling and test for fertilizers: Part 2 determination of nitrogen: Sec 2 test methods not covered under dual number standards (Second Revision)	FAD 07
20	IS 6092 (Part 2/Sec 3):2004 ISO 4176	Methods of sampling and test for fertilizers: Part 2 determination of nitrogen: Sec 3 nitrate nitrogen content - Nitron gravimetric method	FAD 07
21	IS 6092 (Part 2/Sec 4):2004 ISO 5314	Methods of sampling and test for fertilizers: Part 2 determination of nitrogen: Sec 4 ammoniacal nitrogen content - Titrimetric method after distillation	FAD 07
22	IS 6092 (Part 2/Sec 5):2004 ISO 5315	Methods of sampling and test for fertilizers: Part 2 determination of nitrogen: Sec 5 total nitrogen content - Titrimetric method after distillation	FAD 07
23	IS 6092 (Part 3/Sec 1):2004	Methods of sampling and test for fertilizers: Part 3 determination of phosphorus: Sec 1 introduction (Second Revision)	FAD 07
24	IS 6092 (Part 3/Sec 2):2004	Methods of sampling and test for fertilizers: Part 3 determination of phosphorus: Sec 2 test methods not covered under dual number standards (Second Revision)	FAD 07
25	IS 6092 (Part 3/Sec 3):2004 ISO 5316	Methods of sampling and test for fertilizers: Part 3 determination of phosphorus: Sec 3 extraction of water - Soluble phosphates	FAD 07
26	IS 6092 (Part 3/Sec 4):2004 ISO 6598	Methods of sampling and test for fertilizers: Part 3 determination of phosphorus: Sec 4 quinoline phosphomolybdate gravimetric method	FAD 07
27	IS 6092 (Part 3/Sec 5):2004 ISO 7497	Methods of sampling and test for fertilizers: Part 3 determination of phosphorus: Sec 5 extraction of phosphates soluble in mineral acids	FAD 07
28	IS 6092 (Part 4):1985	Methods of sampling and test for fertilizers: Part 4 determination of potassium (First Revision)	FAD 07
29	IS 6092 (Part 5):1985	Methods of sampling and test for fertilizers: Part 5 determination of secondary elements and micronutrients (First Revision)	FAD 07
30	IS 6092 (Part 6):1985	Methods of sampling and test for fertilizers: Part 6 determination of moisture and impurities (First Revision)	FAD 07
31	IS 6940:2025	Methods of test for pesticides and their formulations (First Revision)	FAD 01
32	IS/ISO/TR 10989:2009 ISO/TR 10989	Methods of Test for Rubber or Plastics Coated Fabrics Part 1 Determination of Roll Characteristics Section 1 Methods for Determination of Length, Width and Net Mass ( Third Revision )	TXD 33
33	IS 7016 (Part 1/Sec 2):2019 ISO 2286-2 :2016	Methods of Test for Coated and Treated Fabrics: Part 1 Determination of Roll Characteristics Section 2 Methods for Determination of Total Mass Per Unit Area, Mass Per Unit Area of Coating and Mass Per Unit Area of Substrate (Second Revision)	TXD 33
34	IS 7016 (Part 1/Sec 3):2019 ISO 2286-3 : 2016	Methods of Test for Coated and Treated Fabrics: Part 1 Determination of Roll Characteristics Section 3 Method for Determination of Thickness (Second Revision)	TXD 33
35	IS 15537 (Part 2):2023 ISO 9187-2:2010	Methods of Test for Rubber or Plastics Coated Fabrics Part 2 Determination of Tensile Strength and Elongation at Break ( Third Revision )	TXD 33
36	IS 19026 (Part 1):2023 ISO 12614-1:2021	Methods of Test for Rubber or Plastics Coated Fabrics Part 3 Determination of Tear Resistance Section 1 Constant Rate of Tear Methods (Third Revision)	TXD 33
37	IS 7016 (Part 3/Sec 2):2023 4674-2:2021	Methods of test for coated and treated fabrics: Part 3 determination of tear resistance section 2 ballistic pendulum method (Second Revision)	PCD 29
38	IS 7016 (Part 4):2003 ISO 7854	Methods of Test for Coated and Treated Fabrics: Part 4 Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Damage by Flexing (Second Revision)	TXD 33
39	IS 7016 (Part 5):2019 ISO 2411 : 2017	Methods of Test for Coated and Treated Fabrics: Part 5 Rubber- or Plastics-Coated Fabrics - Determination of Coating Adhesion (Third Revision)	TXD 33
40	IS 7016 (Part 6/Sec 1):2022 ISO 3303-1:2020	Methods of test for coated and treated fabrics: Part 6 determination of bursting strength section 1 steel - Ball method (Second Revision)	PCD 29
41	IS 18650:2024 ISO 26146 : 2012	Methods of Test for Rubber or Plastics Coated Fabrics Part 6 Determination of Bursting Strength Section 2 Hydraulic Method (Third Revision)	TXD 33
42	IS 7016 (Part 7):2023 ISO 1420:2016	Methods of test for coated and treated fabrics: Part 7 rubber - Or plastics - Coated fabrics - Determination of resistance to penetration by water (Second Revision)	TXD 33
43	IS 7016 (Part 8):2023 1419:2019	Methods of test for coated and treated fabrics: Part 8 accelerated ageing	PCD 29
44	IS 7016 (Part 9):2003 ISO 5978	Methods of Test for Coated and Treated Fabrics: Part 9 Rubber- or Plastics-Coated Fabrics - Determination of Blocking Resistance (Second Revision)	TXD 33
45	IS 18750 (Part 2):2024	Methods of Test for Rubber or Plastics Coated Fabrics Part 10 Low-Temperature Bend Test (Second Revision)	TXD 33
46	IS 7016 (Part 11):2023 5979:1982	Methods of test for coated and treated fabrics: Part 11 determination of flexibility - Flat loop method	PCD 29
47	IS 7016 (Part 12):1987	Methods of Test for Coated and Treated Fabrics Part 12 Determination of Tack-Tear Resistance	TXD 33
48	IS 7016 (Part 13):2003 ISO 5473	Methods of Test for Coated and Treated Fabrics: Part 13 Rubber- or Plastics-Coated Fabrics - Determination of Crush Resistance (First Revision)	TXD 33
49	IS 7016 (Part 14):2024 ISO 4646:2022	Methods of Test for Coated and Treated Fabrics: Part 14 Rubber- or Plastics-Coated Fabrics - Low Temperature Impact Test (First Revision)	TXD 33
50	IS 7016 (Part 15):2019 ISO 5470-1 ; 2016	Methods of Test for Coated and Treated Fabrics Part 15 Determination of Abrasion Resistance Using Taber Abrader	TXD 33
51	IS 8329:2000	Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)	MTD 06
52	IS 8749:2024	Biogas stove - Specification (Second Revision)	MED 23
53	IS 8935:1985	Specification for electric solenoid operated actuators (First Revision)	ETD 18
54	IS 9334:1986	Specification for electric motor operated actuators (First Revision)	ETD 18
55	IS 9523:2025	Ductile iron fittings for pressure pipes for water, gas and sewage - Specification (First Revision) Amendment - 7	MTD 06
56	IS 9890:1981	Specification for general purpose ball valves	MED 17
57	IS/IEC 62586-1:2017 62586-1:2017	Bolted Bonnet Steel Gate Valves for the Petroleum, Petrochemical and Allied Industries	MED 17
58	IS 12701:1996	Rotational moulded polyethylene water storage tanks - specification (First Revision)	CED 03
59	IS 17691 (Part 1):2021 ISO/TR 20218-1:2018	Plastic Translucent Sheets made from Thermo-Setting Polyester Resin Glassfibre Reinforced - Specification	CED 05
60	IS 12986 (Part 1):2026	Biogas plants - Glass fibre reinforced polyester resin gas holders - Specification: Part 1 with steel frame	MED 04
61	IS 13095:1991	Butterfly Valves for General Purposes ( First Revision )	MED 17
62	IS 13349:1992	Cast iron single faced thimble mounted sluice gates - Specification	CED 03
63	IS 19027:2023	Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent - Specification (First Revision)	CED 50
64	IS 17567 (Part 1):2021 19807-1	Pneumatic Fluid Power - Five-Port Directional Control Valves Part 1 Mounting Interface Surfaces without Electrical Connector ( First Revision )	PGD 36
65	IS/ISO 17937:2015 ISO 17937:2015	Pneumatic Fluid Power - Five-Port Directional Control Valves Part 2 Mounting Interface Surfaces with Optional Electrical Connector ( First Revision )	PGD 36
66	IS 15045 (Part 3):2001 ISO 5599-3	Pneumatic fluid power - Five port directional control valves: Part 3 code system for communication of valve functions	PGD 36
67	IS 15663 (Part 1):2006	Design and installation of natural gas pipelines - Code of Practice : Part 1 Laying of pipelines	CED 07
68	IS 15778:2007	Chlorinated Polyvinyl Chloride (CPVC) Pipes for Potable Hot and Cold Water Distribution Supplies - Specification	CED 50
69	IS 16087:2025	Biogas (Biomethane) - Specification (First Revision)	PCD 03
70	IS 18419:2023	Metal ball valves for petroleum petrochemical and allied industries First Revision	MED 17
71	IS 18471 (Part 2):2023 ISO 15482:1999	Stainless Steel seamless pipes and tubes for general service	MTD 19
72	IS 18471 (Part 3):2023 ISO 15483:1999	Stainless steel welded pipes and tubes for general service	MTD 19
73	IS/ISO 22109:2020 ISO 22109 : 2020	Industrial Valves - Gearbox for Valves	MED 17

International Standards Referred In IS 9478:2023

1	ISO 1421 : 2016
2	ISO 3303 : 2 : 2012
3	ISO 15105 : 1 : 2007

IS 9478:2023
is Referred in following Indian Standards :

1	IS 12986 : Part 1 : 1990	Biogas plants - Glass fibre reinforced polyester resin gas holders - Specification: Part 1 with steel frame	MED 04

Classification Details

Certification	:
Group	:	Electrical Switchgear and Other Electrical Products/Accessories
Sub Group	:	Renewable energy devices
Sub Sub Group	:	Solar flat plate collector , Water heating system, Solar cooker , Bio gas plant & Biomass cook stove
Aspect	:	Code of Practice

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 4

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details