BUREAU OF INDIAN STANDARDS
Programme of Work
CHD20 : Paints, Varnishes And Related Products
- Scope : a) To formulate Indian Standards for terminology, methods of sampling and tests, codes of practice, and specifications on paints and coatings (including industrial paints- inorganic, organic, hybrid, sol gel, etc.), varnishes excluding metalized coatings. b) To coordinate with ISO/TC 35
-
Liaison :ISO/TC 35 - Paints and varnishes - Participating (P)
ISO/TC 35/SC 12 - Preparation of steel substrates before application of paints and related products - Observer (O)
ISO/TC 35/SC 14 - Protective paint systems for steel structures
ISO/TC 35/SC 16 - Chemical analysis - Observer (O)
ISO/TC 35/SC 9 - General test methods for paints and varnishes - Participating (P)
|
IS 10018:1981 |
Specification for lacquer, cellulose nitrate, clear, finishing, glossy for wood
|
May, 2024
|
-
|
Indigenous
|
|
|
IS 101 (Part 3/Sec 2):2025 ISO 2808 : 2019 |
Methods of Sampling and Test for Paints Varnishes and Related Products Part 3 Tests on Paint Film Formation Sec 2 Determination of film thickness (Fourth Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 2/Sec 2):2025 |
Methods of Sampling and Test for Paints Varnishes and Related Products Part 2 test on liquid paints chemical examination Sec 2 Determination of non-volatile-matter content (Fourth Revision)
|
-
|
Modified/Technically Equivalent
|
||
|
IS 101 (Part 1/Sec 2):2023 ISO 1513 : 2010 |
Methods of sampling and test for paints, varnishes and related products : Part 1 test on liquid paints (general and physical) : Sec 2 preliminary examination and preparation of samples for testing (Fourth Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 2/Sec 5):2017 ISO 17895 : 2005 |
Methods of sampling and test for paints, varnishes and related products: Part 2 test on liquid paints (chemical examination): Sec 5 determination of volatile organic compound content of low-VOC emulsion paints (In-Can VOC)
|
May, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 101 (Part 1/Sec 5):2024 |
Methods of sample and test for paints varnishes and related products : Part 1 test on liquid paints (general and physical) : Sec 5 consistency (Fourth Revision)
|
-
|
Indigenous
|
||
|
IS 101 (Part 5/Sec 8):2024 ISO 7784-3 : 2022 |
Methods of sampling and test for paints, varnishes and related products: Part 5 Mechanical tests: Sec 8 Determination of resistance to abrasion by abrasive-paper covered wheel and linearly reciprocating test specimen
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 1/Sec 3):1986 |
Methods of sampling and test for paints, varnishes and related products: Part 1 tests on liquid paints (general and physical): Sec 3 preparation of panels
|
May, 2022
|
1
|
Indigenous
|
|
|
IS 101 (Part 1/Sec 6):1987 |
Methods of sampling and test for paints, varnishes and related products: Part 1 tests on liquid paints (general and physical): Sec 6 flash point (Third Revision)
|
May, 2019
|
-
|
Indigenous
|
|
|
IS 101 (Part 11/Sec 1):2024 ISO 4628-1:2016 |
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 11 Evaluation of degradation of coatings Designation of quantity and size of defects and of intensity of uniform changes in appearance Sec 1 General introduction and designation system
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 1/Sec 7):2020 ISO 2811-1 : 2016 |
Methods of sampling and test for paints, varnishes and related products : Part 1 test on liquid paints (general and physical) : Sec 7 mass per 10 litres - determination of density - pycnometer method (Fourth Revision)
|
August, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 101 (Part 11/Sec 7):2024 ISO 4628-7:2016 |
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 11 Evaluation of degradation of coatings - Designation of quantity and size of defects and of intensity of uniform changes in appearance Sec 7 Assessment of degree of chalking by velvet method
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 2/Sec 1):2018 |
Methods of sampling and test for paints, varnishes and related products: Part 2 test on liquid paints (chemical examination): Sec 1 water content (Fourth Revision)
|
August, 2023
|
-
|
Indigenous
|
|
|
IS 101 (Part 11/Sec 3):2024 ISO 4628-3 : 2016 |
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 11 Evaluation of degradation of coatings- Designation of quantity and size of defects, and of intensity of uniform changes in appearance Sec 3 Assessment of degree of rusting
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 11/Sec 4):2024 ISO 4628-4:2016 |
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 11 Evaluation of degradation of coatings -Designation of quantity and size of defects and of intensity of uniform changes in appearance Sec 4 Assessment of degree of cracking
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 3/Sec 1):1986 |
Methods of sampling and test for paints, varnishes and related products: Part 3 tests on paint film formation: Sec 1 drying time (Third Revision)
|
May, 2022
|
2
|
Indigenous
|
|
|
IS 101 (Part 11/Sec 6):2024 ISO 4628-6:2023 |
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 11 Evaluation of degradation of coatings - Designation of quantity and size of defects and of intensity of uniform changes in appearance Sec 6 Assessment of degree of chalking by tape method
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 11/Sec 8):2024 ISO 4628-8 : 2012 |
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 11 Evaluation of degradation of coatings - Designation of quantity and size of defects and of intensity of uniform changes in appearance Sec 8 Assessment of degree of delamination and corrosion around a scribe or other artificial defect
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 3/Sec 4):1987 |
Methods of sampling and test for paints, varnishes and related products: Part 3 tests on paint film formation: Sec 4 finish (Third Revision)
|
May, 2019
|
3
|
Indigenous
|
|
|
IS 101 (Part 11/Sec 10):2024 ISO 4628-10 : 2024 |
Methods of Sampling and Test for Paints, Varnishes and Related Products Part 11 Evaluation of Degradation of Coatings- Designation of Quantity and Size of Defects, and of Intensity of Uniform Changes in Appearance Sec 10 Assessment of degree of filiform corrosion
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 4/Sec 1):1988 |
Methods of sampling and test for paints, varnishes and related products: Part 4 optical test: Sec 1 opacity (Third Revision)
|
May, 2024
|
-
|
Indigenous
|
|
|
IS 101 (Part 2/Sec 4):2022 ISO 11890-2 : 2020 |
Methods of sampling and test for paints varnishes and related products: Part 2 test on liquid paints chemical examination : Sec 4 determination of volatile organic compound voc and or semi volatile organic compounds svoc content gas-chromatographic (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 4/Sec 3):1988 |
Methods of sampling and test for paints, varnishes and related products: Part 4 optical tests: Sec 3 light fastness test (Third Revision)
|
May, 2024
|
-
|
Indigenous
|
|
|
IS 101 (Part 4/Sec 4):2020 ISO 2813 : 2014 |
Methods of Sampling and Test for Paints, Varnishes and Related Products : Part 4 optical test : Sec 4 gloss - determination of gloss value at 20 C, 60 C, and 80 C ( Fourth Revision )
|
August, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 101 (Part 5/Sec 1):1988 |
Methods of sampling and test for paints, varnishes and related products: Part 5 mechanical test on paint films: Sec 1 hardness tests (Third Revision)
|
May, 2024
|
-
|
Indigenous
|
|
|
IS 101 (Part 5/Sec 2):1988 |
Methods of sampling and test for paints, varnishes and related products: Part 5 mechanical tests: Sec 2 flexibility and adhesion (Third Revision)
|
May, 2024
|
3
|
Indigenous
|
|
|
IS 101 (Part 5/Sec 3):2019 ISO 6272-1 : 2011 |
Methods of sampling and test for paints, varnishes and related products: Part 5 mechanical tests: Sec 3 impact resistance - falling - weight test, large - Area indenter (Fifth Revision)
|
March, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 101 (Part 5/Sec 4):1988 |
Methods of sampling and test for paints, varnishes and related products: Part 5 Mechanical tests: Sec 4 Print free test (Third Revision)
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 101 (Part 6/Sec 1):1988 |
Methods of sampling and test for paints, varnishes and related products: Part 6 durability tests: Sec 1 resistance to humidity under conditions of condensation (Third Revision)
|
December, 2024
|
3
|
Indigenous
|
|
|
IS 101 (Part 6/Sec 2):1989 |
Methods of sampling and test for varnishes and related products: Part 6 durability test on paint films: Sec 2 keeping properties (Third Revision)
|
May, 2024
|
-
|
Indigenous
|
|
|
IS 101 (Part 6/Sec 3):1990 |
Methods of sampling and test for paints, varnishes and related products: Part 6 durability tests on paint films: Sec 3 moisture vapour permeability (Third Revision)
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 101 (Part 6/Sec 5):1997 |
Method of sampling and test for paints, varnishes and related products: Part 6 durability test on Paint films: Sec 5 accelerated weathering test
|
May, 2022
|
-
|
Indigenous
|
|
|
IS 101 (Part 7/Sec 1):1989 |
Methodsof sampling and test for paints, varnishes and related produdTs: Part 7 environmental tests on paint films: Sec 1 resistance to water (Third Revision)
|
May, 2024
|
-
|
Indigenous
|
|
|
IS 101 (Part 7/Sec 2):1990 |
Methods of sampling and test for paints,varnishes and related products: Part 7 environmental tests on paint films: Sec 2 resistance to liquids (Third Revision)
|
December, 2020
|
1
|
Indigenous
|
|
|
IS 101 (Part 7/Sec 3):2020 ISO 3240 : 2016 |
Methods of sampling and test for paints, varnishes and related products: Part 7 environmental tests on paint films: Sec 3 determination of the effect of heat ( Fourth Revision )
|
August, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 101 (Part 7/Sec 4):1990 |
Methods of sampling and test for paints, varnishes and related products: Part 7 environmental tests on paint films: Sec 4 resistance to bleeding of pigments (Third Revision)
|
May, 2022
|
1
|
Indigenous
|
|
|
IS 101 (Part 8/Sec 1):1989 |
Methods of sampling and test for paints, varnishes and related products: Part 8 tests for pigments and other solids: Sec 1 residue on sieve (Third Revision)
|
May, 2024
|
-
|
Indigenous
|
|
|
IS 101 (Part 8/Sec 2):1990 |
Methods of sampling and test for paints, varnishes and related products: Part 8 tests for pigments and other solids: Sec 2 pigments and non - volatile matter (Third Revision)
|
May, 2022
|
4
|
Indigenous
|
|
|
IS 101 (Part 8/Sec 3):1993 |
Methods of sampling and test for paints, varnishes and related products: Part 8 tests for pigments and other solids: Sec 3 ash content (Third Revision)
|
May, 2024
|
-
|
Indigenous
|
|
|
IS 101 (Part 8/Sec 4):2015 |
Methods of sampling and test for paints, varnishes and related products: Part 8 tests for pigments and other solids: Sec 4 phthalic anhydride (Fourth Revision)
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 101 (Part 1/Sec 8):2022 ISO 787-9 : 2019 |
Methods of sampling and test for paints varnishes and related products : Part 1 test on liquid paints (general and physical) : Sec 8 pigments and extenders determination of pH value of an aqueous suspension (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 3/Sec 5):2022 ISO 1524 : 2020 |
Method of sampling and test of paints varnishes and related products : Part 3 test on paint film formation : Sec 5 determination of fineness of grind (Fifth Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 8/Sec 6):1993 |
Methods of sampling and test for paints,varnishes and related products: Part 8 tests for pigments and other solids: Sec 6 volume solids
|
May, 2024
|
-
|
Indigenous
|
|
|
IS 101 (Part 10/Sec 1):2022 ISO 13320 : 2020 |
Methods of sampling and test for paints varnishes and related products : Part 10 instrumental analysis : Sec 1 particle size analysis- laser diffraction methods (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 9/Sec 1):1993 |
Methods of sampling and test for paints, varnishes and related products: Part 9 tests for lacquers and varnish: Sec 1 acid value (Third Revision)
|
May, 2024
|
-
|
Indigenous
|
|
|
IS 101 (Part 9/Sec 2):1993 |
Methods of sampling and test for paints, varnishes and products: Part 9 tests for lacquers and varnish: Sec 2 rosin test (Third Revision)
|
May, 2024
|
-
|
Indigenous
|
|
|
IS 101 (Part 5/Sec 5):2019 ISO 6272-2 : 2011 |
Methods of sampling and test for paints, varnishes and related products: Part 5 Mechanical tests: Sec 5 Impact resistance - Falling - weight test, small - area indenter
|
July, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 101 (Part 4/Sec 2):2021 3668 |
Methods of sampling and test for paints varnishes and related products: Part 4 optical tests: Sec 2 colour-visual comparison of colour of paints (Fourth Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 5/Sec 6):2024 ISO 7784-1 : 2023 |
Methods of sampling and test for paints, varnishes and related products: Part 5 Mechanical tests: Sec 6 Determination of resistance to abrasion by abrasive-paper covered wheels and rotating test specimen
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 10/Sec 2):2018 ISO 16773-1 : 2016 |
Methods of sampling and test for paints varnishes and related products: Part 10 instrumental analysis: Sec 2 electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Terms and definitions
|
March, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 101 (Part 10/Sec 3):2018 ISO 16773-2 : 2016 |
Methods of sampling and test for paints varnishes and related products: Part 10 instrumental analysis: Sec 3 electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Collection of data
|
March, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 101 (Part 10/Sec 4):2018 ISO 16773-3 : 2016 |
Methods of sampling and test for paints varnishes and related products: Part 10 instrumental analysis: Sec 4 electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Processing and analysis of data from dummy cells
|
March, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 101 (Part 1/Sec 4):2024 |
Methods of sampling and test for paints, varnishes and related products Part 1 Tests on Liquid Paints (General and Physical) Section 4 Brushing Test (Fourth Revision)
|
-
|
Indigenous
|
||
|
IS 101 (Part 3/Sec 6):2024 ISO 19403-3 : 2017 |
METHODS OF SAMPLING AND TEST OF PAINTS VARNISHES AND RELATED PRODUCTS PART 3 TEST ON PAINT FILM FORMATION Section 6 Determination of the Surface Tension of Liquid Using the Pendant Drop Method
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 8/Sec 5):2022 |
Methods of sampling and test for paints varnishes and related products : Part 8 tests for pigments and other solids : Section 5 lead restriction Test (Fourth Revision)
|
-
|
Indigenous
|
||
|
IS 101 (Part 10/Sec 5):2018 ISO 16773-4 : 2017 |
Methods of sampling and test for paints varnishes and related products: Part 10 instrumental analysis: Sec 5 electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Examples of spectra of polymer - Coated and uncoated specimens
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 101 (Part 11/Sec 2):2024 ISO 4628-2:2016 |
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 11 Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance Sec 2 Assessment of degree of blistering
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 11/Sec 5):2024 ISO 4628-5:2022 |
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 11 Evaluation of degradation of coatings - Designation of quantity and size of defects and of intensity of uniform changes in appearance Sec 5 Assessment of degree of flaking
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 5/Sec 7):2024 ISO 7784-2 : 2023 |
Methods of sampling and test for paints, varnishes and related products: Part 5 Mechanical tests: Sec 7 Determination of resistance to abrasion by abrasive rubber wheels and rotating test specimen
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 1/Sec 7):2026 |
Methods of Sampling and Test for Paints Varnishes and Related Products Part 1 Test on Liquid Paints General and Physical Section 7 Mass per 10 litres - Determination of Density - Pycnometer Method (Fifth Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 101 (Part 1/Sec 1):2023 |
Methods of sampling and test for paints, varnishes and related products : Part 1 tests on liquid paints (general and physical): Sec 1 sampling (Fourth Revision)
|
-
|
Indigenous
|
||
|
IS 101 (Part 2/Sec 3):2015 ISO 11890-1 : 2007 |
Methods of sampling and test for paints, varnishes and related products: Part 2 test on liquid paints (chemical examination): Sec 3 determination of volatile organic compound (VOC) content - Difference method
|
December, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 104:2017 |
Specification for ready mixed paint, brushing, zinc chrome, priming (Third Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 109:2017 |
Specification for ready mixed paint, finishing, priming, plaster, to indian standard colour no. 361 light stone and no. 631 light grey, white and off - White (Second Revision)
|
June, 2022
|
-
|
Indigenous
|
|
|
IS 110:2017 |
Ready mixed paint, brushing, grey filler, for enamels for use over primers - Specification (Third Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 11883:2017 |
Ready mixed paint, brushing, red oxide, priming for metals specification (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 12744 (Part 1):2013 |
Ready mixed paint, air drying, red oxide - zinc phosphate, priming - Specification : Part 1 for domestic and decoratvie applications (First Revision)
|
March, 2023
|
1
|
Indigenous
|
|
|
IS 1303:2024 |
Paints - Glossary of Terms ( Third Revision )
|
-
|
Indigenous
|
||
|
IS 13183:1991 |
Aluminium paint, heat resistant - Specification
|
December, 2020
|
2
|
Indigenous
|
|
|
IS 13184:1991 |
Mastic filler, epoxy based - Specification
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 13213:2018 |
Polyurethane full gloss enamel (Two Pack) - Specification (First Revision)
|
January, 2023
|
1
|
Indigenous
|
|
|
IS 13238:2021 |
Epoxy based zinc phosphate primer two pack - Specification (First Revision)
|
-
|
Indigenous
|
||
|
IS 13239:2016 |
Epoxy surfacer (Two Pack) - Specification (First Revision)
|
December, 2021
|
-
|
Indigenous
|
|
|
IS 133 (Part 1):2023 |
Enamel interior - undercoating and finishing - Specification (Sixth Revision)
|
-
|
Indigenous
|
||
|
IS 13607:1992 |
Heady mixed paint, finishing, general purposes, synthetic - Specification
|
May, 2024
|
2
|
Indigenous
|
|
|
IS 137:2017 |
Ready mixed paint, brushing, matt or eggshell flat, finishing, interior to indian standard colour as required - Specification (Second Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 13759:2017 |
Polyurethane primer, zinc phosphate (Two - Pack) for exterior painting of railway coaches - Specification (First Revision)
|
February, 2022
|
-
|
Indigenous
|
|
|
IS 13798:1993 |
Polyurethane base knifing filler (Two Pack) for exterior painting of railway coaches - Specification
|
May, 2024
|
2
|
Indigenous
|
|
|
IS 13799:2016 |
Polyurethane Base Surfacer (Two Pack) for Exterior Painting of Railway Coaches - Specification
|
December, 2021
|
-
|
Indigenous
|
|
|
IS 138:2018 Decision taken to Reaffirm and Archive |
Ready mixed paint, marking, for packages and petrol containers - Specification (Fourth Revision)
|
July, 2023
|
-
|
Indigenous
|
|
|
IS 13871:2021 |
Powder coating - Specification
|
-
|
Indigenous
|
||
|
IS 139:2018 Decision taken to Reaffirm and Archive |
Ready mixed paint, marking, quick drying, for marking with rubber stamps - Specification (Third Revision)
|
April, 2023
|
-
|
Indigenous
|
|
|
IS 140:2015 |
Ready mixed paint, exterior, petrol resisting, air drying - Specification (Second Revision)
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 1419:1989 |
Antifouling paint, brushing, for ships bottom and hulls - Specification (Second Revision)
|
May, 2024
|
1
|
Indigenous
|
|
|
IS 142:2017 |
Specification for ready mixed paint, exterior, petrol resisting, stoving (Second Revision)
|
May, 2022
|
-
|
Indigenous
|
|
|
IS 14209:2016 |
Epoxy enamel, two component, glossy - Specification (First Revision)
|
February, 2021
|
-
|
Indigenous
|
|
|
IS 14314:1995 |
Thinner, general purpose, for synthetic paints and varnishes - Specification
|
May, 2022
|
-
|
Indigenous
|
|
|
IS 144:1950 |
Specification for ready mixed paint, brushing, petrol resisting, air - Drying, for interior painting of tanks and container & red oxide (Colour Unspecified)
|
May, 2024
|
2
|
Indigenous
|
|
|
IS 145:1950 |
Specification for ready mixed paint, slushing, petrol resisting, air - Drying, for interior painting of tanks and - Containers, red oxide, (Colour Unspecified)
|
May, 2024
|
3
|
Indigenous
|
|
|
IS 14506:1998 |
Epoxy redoxide zinc phosphate weldable primer,two component - Specification
|
May, 2024
|
1
|
Indigenous
|
|
|
IS 14589:1999 Reaffirmed but not taken up for revision |
Zinc priming paint, epoxy based, two - Pack - Specification
|
May, 2019
|
-
|
Indigenous
|
|
|
IS 146:1950 |
Specification for ready mixed paint, brushing, petrol resisting, stoving, for interior painting of tanks and containers, red oxide (Colour Unspecified)
|
May, 2024
|
1
|
Indigenous
|
|
|
IS 147:1950 Reaffirmed but not taken up for revision |
Specification for ready mixed paint, slushing, petrol resisting, stoving for interior painting of tanks and containers, red oxide (Colour Unspecified)
|
May, 2019
|
1
|
Indigenous
|
|
|
IS 14946:2001 |
Zinc ethyl silicate primer, two components - Specification
|
May, 2022
|
-
|
Indigenous
|
|
|
IS 14948:2001 |
Paint coal tar epoxy, two pack, black and brown (Base and Hardner) - Specification
|
May, 2022
|
-
|
Indigenous
|
|
|
IS 150:1950 |
Specification for ready mixed paint, brushing, finishing, stoving, enamel, colour as required
|
December, 2020
|
2
|
Indigenous
|
|
|
IS 151:2017 |
Ready mixed paint, spraying, finishing, stoving, enamel for general purposes, colour as required - Specification (Second Revision)
|
May, 2022
|
-
|
Indigenous
|
|
|
IS 15489:2024 |
Paint, Plastic Emulsion — Specification (Second Revision)
|
-
|
Indigenous
|
||
|
IS 158:2015 |
Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 159:2024 |
Ready Mixed Paint, Brushing, Acid Resisting — Specification (Second Revision)
|
-
|
Indigenous
|
||
|
IS 16239:2021 |
Polyurethane Matt Finish ( TWO PACK) - Specification
|
-
|
Indigenous
|
||
|
IS 16361:2015 |
Thermoplastic polymer based coatings: (A) undercoating (B) finishing - Specification
|
December, 2020
|
1
|
Indigenous
|
|
|
IS 164:2023 |
Ready mixed paint for road marking - Specification (Third Revision)
|
-
|
Indigenous
|
||
|
IS 16676:2024 |
Solventless Liquid Epoxy System for Application on Interior and Exterior Surfaces of Steel Water Pipeline � Specification (First Revision)
|
-
|
Indigenous
|
||
|
IS 16719:2022 |
Solvent free polyurethane coatings for exterior of steel pipe & fittings - Specification (First Revision)
|
-
|
Indigenous
|
||
|
IS 168:2024 |
Ready Mixed Paint Air Drying for General Purpose Specification Fifth Revision
|
-
|
Indigenous
|
||
|
IS 16942:2018 Decision taken to Reaffirm and Archive |
Silicone soya alkyd exterior paint - Specification
|
December, 2023
|
-
|
Indigenous
|
|
|
IS 16943:2019 |
Two components high build epoxy micaceous iron oxide (MIO) pigmented intermediate coat - Specification
|
-
|
Indigenous
|
||
|
IS 16944:2018 |
Two components high build epoxy titanium dioxide (TiO2) pigmented intermediate coat - Specification
|
-
|
Indigenous
|
||
|
IS 17044:2018 |
Intumescent fire retardant paint (Water Based) - Specification
|
September, 2023
|
-
|
Indigenous
|
|
|
IS 17072:2019 |
Non plastic, biodegradable polymer based paper coating chemical
|
-
|
Indigenous
|
||
|
IS 17218:2019 Decision taken to Reaffirm and Archive |
Solar Thermo-Reflective Exterior Coating for Cooling of Roof Top
|
March, 2024
|
-
|
Indigenous
|
|
|
IS 17545:2021 |
White cement based polymeric putty
|
-
|
Indigenous
|
||
|
IS 1874:2018 |
Ready mixed paint, universal, zinc chrome, priming (Synthetic) for light alloys - Specification (Second Revision)
|
May, 2024
|
-
|
Indigenous
|
|
|
IS 18751:2024 |
Polymer Coated Inner tanks for Storage Water Heater - Specification
|
-
|
Indigenous
|
||
|
IS 2074:2023 |
Ready Mixed Paint Air Drying Red Oxide Zinc Chrome Priming -Specification (Fourth Revision)
|
1
|
Indigenous
|
||
|
IS 2075:2017 |
Ready mixed paint, stoving, red oxide zinc chrome, priming - Specification (Third Revision)
|
May, 2022
|
-
|
Indigenous
|
|
|
IS 2339:2013 |
Aluminium paints for general purposes - Specification (First Revision)
|
March, 2023
|
-
|
Indigenous
|
|
|
IS 2932:2025 |
Air Drying Enamel Paint for Architectural and Industrial Applications - Specification (Fifth Revision)
|
-
|
Indigenous
|
||
|
IS 341:2016 |
Black japan, types a, b and c - Specification (Second Revision)
|
December, 2021
|
-
|
Indigenous
|
|
|
IS 344:2023 |
Varnish stoving - Specification (Second Revision)
|
-
|
Indigenous
|
||
|
IS 347:2023 |
Varnish shellac for general purposes - Specification (Second Revision)
|
-
|
Indigenous
|
||
|
IS 348:1968 Reaffirmed but not taken up for revision |
Specification for french polish (First Revision)
|
May, 2019
|
-
|
Indigenous
|
|
|
IS 3536:2016 |
Ready mixed paint, brushing, wood primer - Specification (Second Revision)
|
December, 2021
|
-
|
Indigenous
|
|
|
IS 3537:2017 |
Ready mixed paint, finishing, interior, for general purposes, to indian standard colours - Specification (First Revision)
|
September, 2022
|
-
|
Indigenous
|
|
|
IS 3539:1966 |
Specification for ready mixed paint, undercoating, for use under oil finishes, to indian standard colours, as required
|
May, 2024
|
2
|
Indigenous
|
|
|
IS 3585:2018 Decision taken to Reaffirm and Archive |
Ready mixed paint, aluminium, brushing, priming, water resistant for woodwork - Specification (First Revision)
|
July, 2023
|
-
|
Indigenous
|
|
|
IS 3678:2016 |
Ready mixed paint, thick white, for lettering - Specification (First Revision)
|
December, 2021
|
-
|
Indigenous
|
|
|
IS 3709:1966 Reaffirmed but not taken up for revision |
Specification for mastic cement for bedding of metal windows
|
May, 2019
|
-
|
Indigenous
|
|
|
IS 3944:1982 |
Method for determination of flow time by use of flow cups (First Revision)
|
September, 2015
|
-
|
Indigenous
|
|
|
IS 419:2023 |
Putty for use on window frames - Specification (Second Revision)
|
-
|
Indigenous
|
||
|
IS 423:1961 Reaffirmed but not taken up for revision |
Specification for Plastic wood for joiners filler (Revised)
|
May, 2019
|
-
|
Indigenous
|
|
|
IS 427:2013 |
Distemper, dry, colour as required - Specification (Third Revision)
|
September, 2023
|
-
|
Indigenous
|
|
|
IS 428:2013 |
Washable distemper - Specification (Third Revision)
|
March, 2023
|
-
|
Indigenous
|
|
|
IS 430:1972 Decision taken to Reaffirm and Archive |
Specification for paint remover, solvent type, non - Flammable (Second Revision)
|
May, 2024
|
1
|
Indigenous
|
|
|
IS 431:1972 Decision taken to Reaffirm and Archive |
Specification for paint remover, solvent type, flammable (Second Revision)
|
May, 2024
|
1
|
Indigenous
|
|
|
IS 5:2007 |
Colours for ready mixed paints and enamels (Sixth Revision)
|
May, 2022
|
-
|
Indigenous
|
|
|
IS 5083:2023 |
Knifing stopper for railway coaches-Specification (Third Revision)
|
-
|
Indigenous
|
||
|
IS 524:2024 |
Varnish for General Purpose - Specification (Third Revision)
|
-
|
Indigenous
|
||
|
IS 5410:2013 |
Cement paint - Specification (Second Revision)
|
1
|
Indigenous
|
||
|
IS 5661:2023 |
Packing and marking of packages of paints, enamels, varnishes and allied products - Code of practice (First Revision)
|
-
|
Indigenous
|
||
|
IS 5666:2024 |
Etch Primer — Specification (First Revision)
|
-
|
Indigenous
|
||
|
IS 5667:1970 |
Specification for thinner for cellulose nitrate based paints and lacquers
|
December, 2020
|
1
|
Indigenous
|
|
|
IS 5691:2024 |
Lacquer, cellulose nitrate, pigmented, finishing, glossy — Specification (First revision)
|
-
|
Indigenous
|
||
|
IS 6125:2025 |
Stoving Enamel Paint for General Industrial Applications - Specification (Second Revision)
|
-
|
Indigenous
|
||
|
IS 6126:1971 |
Specification for nitrocellulose surfacer
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 6127:2023 |
Varnish spar and fungicidal - specification (First Revision)
|
-
|
Indigenous
|
||
|
IS 6714:1989 |
Ready mixed paint, finishing, non - slip, deck - Specification (First Revision)
|
May, 2024
|
-
|
Indigenous
|
|
|
IS 6947 (Part 1):1973 Reaffirmed but not taken up for revision |
Methods of estimation of composite pigments in oil pastes and ready mixed paints: Part 1 estimation of lead, zinc oxide, titanium dioxide, calcium compounds and zinc sulphide
|
May, 2019
|
1
|
Indigenous
|
|
|
IS 6947 (Part 3):1975 Reaffirmed but not taken up for revision |
Methods of estimation of composite pigments in oil pastes, ready mixed paints and enamels: Part 3 Estimation of lead chromes, iron blues and zinc compounds
|
May, 2019
|
-
|
Indigenous
|
|
|
IS 6947 (Part 2):1975 Reaffirmed but not taken up for revision |
Methods of estimation of composite pigments in oil pastes, ready mixed paints and enamels: Part 2 estimation of zinc chromes, ferric oxide and aluminium
|
May, 2019
|
-
|
Indigenous
|
|
|
IS 6948:1973 |
Specification for ready mixed paint, undercoat, synthetic for ships
|
December, 2020
|
2
|
Indigenous
|
|
|
IS 6951:1973 |
Specification for ready mixed paint, finishing, exterior, for ships
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 7164:1973 Reaffirmed but not taken up for revision |
Specification for stopper
|
May, 2019
|
-
|
Indigenous
|
|
|
IS 8098 (Part 1):2023 |
Finishing of automobile bodies - Code of practice : Part 1 finishing of passenger cars (First Revision)
|
-
|
Indigenous
|
||
|
IS 8098 (Part 2):2023 |
Finishing of automobile bodies - Code of practice : Part 2 refinishing of passenger cars (First Revision)
|
-
|
Indigenous
|
||
|
IS 8982:2019 |
Ready mixed paint, finishing, air-drying for war equipment - Specification (Second Revision)
|
March, 2024
|
-
|
Indigenous
|
|
|
IS 8983:2018 |
Ready mixed paint, finishing, stoving for war equipment - Specification (First Revision)
|
July, 2023
|
-
|
Indigenous
|
|
|
IS 9862:2017 |
Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision)
|
March, 2022
|
-
|
Indigenous
|
| No Records Found |
| No Records Found |
| No Records Found |
| No Records Found | ||
CHD 20 (27896)
|
Thermoplastic Road Marking Paint - Specification |
|
CHD 20 (28841)
Revision of: IS 101:1986 |
Methods of Sampling and Test for Paints Varnishes and Related Products Part 1 Tests on Liquid Paints General and Physical Section 3 Preparation of Panels Fourth Revision |
|
CHD 20 (33121)
|
Solvent-Borne Polyurethane Enamel Paint Two Pack Specification Second Revision |
|
CHD 20 (33133)
|
Water-Borne Polyurethane Enamel Paint Two Pack Specification |
|
CHD 20 (02172)
Revision of: IS 150:1950 |
Ready mixed paint brushing finishing stoving for enamel colour as required | |
|
CHD 20 (02056)
Revision of: IS 101:2018 |
Methods Of Sampling And Test For Paints Varnishes And Related Products Part 2 Test On Liquid Paints chemical Examination Sec 1 Water Content | |
|
CHD 20 (01657)
|
READY MIXED PAINT EXTERIOR PETROL RESISTING AIR DRYING - SPECIFICATION | |
|
CHD 20 (01658)
|
Ready Mixed Paint Exterior Petrol Resisting Stoving | |
|
CHD 20 (01659)
|
Ready Mixed Paint Spraying Finishing Stoving Enamel For General Purposes Colour As Required | |
|
CHD 20 (01660)
|
READY MIXED PAINT BRUSHING BITUMINOUS BLACK ACID ALKALI AND HEAT RESISTING 8213 SPECIFICATION | |
|
CHD 20 (01661)
|
READY MIXED PAINT FOR ROAD MARKING - SPECIFICATION | |
|
CHD 20 (02032)
|
Methods Of Sampling And Test For Paints Varnishes And Related Products Part 1 Tests On Liquid Paints general And Physical Sec 5 Consistency | |
|
CHD 20 (02034)
|
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PART 2 TEST ON LIQUID PAINTS CHEMICAL EXAMINATION Section 5 Determination of Volatile Organic Compound Content of Low- VOC Emulsion PRODUCTS Paints In-Can VOC | |
|
CHD 20 (02035)
|
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PART 1 TEST ON LIQUID PAINTS GENERAL AND PHYSICAL Section 8 Pigments and Extenders - Determination of pH Value of an Aqueous PRODUCTS Suspension | |
|
CHD 20 (01805)
Revision of: IS 101:2015 |
Methods of sampling and test for paints varnishes and related products Part 8 Tests for pigments and other solids Sec 4 Phthalic anhydride | |
|
CHD 20 (01810)
|
Polyurethane Matt Finish TWO PACK -Specification | |
|
CHD 20 (01903)
Revision of: IS 348:1968 |
French Polish | |
|
CHD 20 (01905)
Revision of: IS 2074:2015 |
READY MIXED PAINT AIR DRYING RED OXIDE - ZINC CHROME PRIMING - SPECIFICATION Part 1 For Domestic and Decorative Applications Third Revision | |
|
CHD 20 (02028)
|
Specification for Ready Mixes Paint Brushing Red Oxide Priming for Metals First Revision | |
|
CHD 20 (02029)
|
Polyurethane Full Gloss Enamel Two Pack - Specification First Revision | |
|
CHD 20 (01901)
|
Ready Mixed Paint Brushing Zinc Chrome Priming | |
|
CHD 20 (01902)
|
Ready Mixed Paint Brushing Priming Plaster to Indian Standard Colour No 361 Light Stone and No 631 Light Grey | |
|
CHD 20 (01907)
|
Ready mixed paint aluminium brushing priming water resistant for woodwork | |
|
CHD 20 (02072)
|
Ready Mixed Paint Marking For Packages And Petrol Containers Fourth revision | |
|
CHD 20 (01939)
|
Thermoplatic Polymer Based Contings a Under Coating b Finising - Specification | |
|
CHD 20 (02070)
|
SPECIFICATION For Ready Mixed Paint Brushing Grey Filler For Enamels For Use Over Primers Third revision | |
|
CHD 20 (02071)
|
SPECIFICATION For Ready Mixed Paint Brushing Matt Or Eggshell Flat Finishing Interior To Indian Standard Colour As Required second revision | |
|
CHD 20 (02074)
|
Black japan Types A B and C | |
|
CHD 20 (02073)
|
Ready mixed paint air drying for general purpose | |
|
CHD 20 (02075)
|
Epoxy Enamel Two Component Glassy | |
|
CHD 20 (02076)
|
Polyurethane Base Surfacer Two Pack for Exterior Painting of Railway Coaches | |
|
CHD 20 (02080)
|
Ready mixed paint thick white for lettering | |
|
CHD 20 (02095)
|
Enamel synthetic stoving for automobiles | |
|
CHD 20 (02093)
|
Ready Mixed Paint Stoving Red Oxide Zinc Chrome Priming | |
|
CHD 20 (02081)
|
Enamel Synthetic Exterior Air Drying For Use On Primed Surfaces Of Motor Vehicles And Other Equipment | |
|
CHD 20 (02092)
|
Ready mixed paint universal zinc chrome priming synthetic for light alloys Second Revision of IS 1874 | |
|
CHD 20 (02055)
|
Methods of sampling and test for paints varnishes and related products Part 2 Test on liquid paints chemical examination Sec 4 Determination of volatile organic compound VOC content - Gas- chromatographic method | |
|
CHD 20 (01936)
|
intumescent fire retardant paint water based - specification | |
|
CHD 20 (02094)
|
Ready Mixed Paint Finishing Interior for General Purposes To Indian Standard Colours No 101 216 217 219 275 281 352 353 358to361 363 364 388 410 442 444 628 631 632 634 693 697 White And Black | |
|
CHD 20 (02079)
|
Ready Mixed Paint Brushing Wood Primer | |
|
CHD 20 (02078)
|
Epoxy Surfacer two Pack | |
|
CHD 20 (02162)
|
Ready Mixed Paint Air Drying Red Oxide - Zinc Chrome Priming - Specification Part 1 For Domestic and Decorative Applications Third Revision Amendment - 1 | |
|
CHD 20 (02027)
Revision of: IS 9862:2017 |
READY MlXED PAINT BRUSHING BITUMINOUS BLACK ACID ALKALI WATER AND CHLORINE RESISTlNG SPECIFICATION First Revision | |
|
CHD 20 (02077)
Revision of: IS 13759:2017 |
POLYURETHANE PRIMER ZINC PHOSPHATE TWO-PACK FOR EXTERIOR PAINTING OF RAILWAY COACHES - SPECIFICATION First Revision | |
|
CHD 20 (10105)
|
TWO COMPONENTS HIGH BUILD EPOXY TITANIUM DIOXIDE TiO2 PIGMENTED INTERMEDIATE COAT SPECIFICATION | |
|
CHD 20 (10106)
|
TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE MIO PIGMENTED INTERMEDIATE COAT SPECIFICATION | |
|
CHD 20 (10107)
|
SILICONE SOYA ALKYD EXTERIOR PAINT SPECIFICATION | |
|
CHD 20 (10134)
Revision of: IS 139:2018 |
READY MIXED PAINT MARKING QUICK DRYING FOR MARKING WITH RUBBER STAMPS - SPECIFICATION Third Revision | |
|
CHD 20 (10135)
Revision of: IS 8982:2019 |
READY MIXED PAINT FINISHING AIR-DRYING FOR WAR EQUIPMENT SPECIFICATION Second Revision | |
|
CHD 20 (10137)
Revision of: IS 8983:2018 |
READY MIXED PAINT FINISHING STOVING FOR WAR EQUIPMENT SPECIFICATION Second Revision | |
|
CHD 20 (10969)
|
IS 101 Part10 Sec 2 2017 Methods of sampling and test for paints varnishes and related products Part 10 Instrumental Analysis Sec 2 Electrochemical Impedance Spectroscopy EIS on Coated and Uncoated Metallic Specimens - Terms and Definitions | |
|
CHD 20 (10970)
|
IS 101 Part10 Sec 3 2017 Methods of sampling and test for paints varnishes and related products Part 10 Instrumental Analysis Sec 3 Electrochemical Impedance Spectroscopy EIS on Coated and Uncoated Metallic Specimens - Collection of data | |
|
CHD 20 (10971)
|
IS 101 Part10 Sec 4 2017 Methods of sampling and test for paints varnishes and related products Part 10 Instrumental Analysis Sec 4 Electrochemical Impedance Spectroscopy EIS on coated and Uncoated Metallic Specimens Processing and Analysis of Data from Dummy Cells | |
|
CHD 20 (10972)
|
IS 101 Part10 Sec 5 2017Methods of sampling and test for paints varnishes and related products Part 10 Instrumental Analysis Sec 5 Electrochemical Impedance Spectroscopy EIS on coated and Uncoated Metallic Specimens - Examples of Spectra of Polymer - Coated and Uncoated Specimens | |
|
CHD 20 (11055)
|
SOLVENTLESS LIQUID EPOXY SYSTEM FOR APPLICATION ON INTERIOR AND EXTERIOR SURFACES OF STEEL WATER PIPELINE SPECIFICATION | |
|
CHD 20 (11077)
|
IS 101 Part 10 Sec 1 2017 Methods of sampling and test for paints varnishes and related products Part 10 Instrumental Analysis Sec 1 Particle Size Analysis- Laser Diffraction Methods | |
|
CHD 20 (11902)
|
Polyurethane Coatings for the Interior and Exterior of Steel Pipe Fittings | |
|
CHD 20 (11966)
|
Epoxy red oxide zinc phosphate weldable primer two component Amendment - 1 | |
|
CHD 20 (12289)
|
Ready Mixed Paint Air Drying for General Purpose - Specification Fourth Revision Amendment - 1 | |
|
CHD 20 (12396)
Revision of: IS 13871:1993 |
Powder Coatings | |
|
CHD 20 (12417)
|
Draft Amendment No 1 to IS 1303 1983 Glossary of terms relating to paints second revision Glossary of terms relating to paints Amendment - 1 | |
|
CHD 20 (12652)
|
Polyurethane Full Gloss Enamel Two Pack - Specification First Revision Amendment - 1 | |
|
CHD 20 (12926)
|
WHITE CEMENT BASED POLYMERIC PUTTY | |
|
CHD 20 (12938)
|
NON PLASTIC BIODEGRADABLE POLYMER BASED PAPER COATING CHEMICAL | |
|
CHD 20 (12962)
|
INTUMESCENT FIRE RETARDANT PAINT WATER BASED SPECIFICATION | |
|
CHD 20 (13275)
|
Ready Mixed Paint Air Drying Red Oxide - Zinc Chrome Priming - Specification Part 1 For Domestic and Decorative Applications Third Revision Amendment - 2 | |
|
CHD 20 (13722)
|
SOLAR THERMO-REFLECTIVE EXTERIOR COATING FOR COOLING OF ROOF TOP | |
|
CHD 20 (13761)
Revision of: IS 101:2019 |
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 5 MECHANICAL TESTS SEC 3 IMPACT RESISTANCEFALLING-WEIGHT TEST LARGE-AREA INDENTER Fifth Revision | |
|
CHD 20 (13765)
Revision of: IS 101:2019 |
IS 101 Part 3Sec 5 XXXX ISO 1524 2013 METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 3 TESTS ON PAINT FILM FORMATION SEC 5 DETERMINATION OF FINENESS OF GRIND Fourth Revision | |
|
CHD 20 (13774)
|
IS 101 Part 5Sec 5 XXXX ISO 6272-2 2011 METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 5 MECHANICAL TESTS SEC5IMPACT RESISTANCEFALLING-WEIGHT TEST SMALL-AREA INDENTER Fifth Revision | |
|
CHD 20 (15009)
Revision of: IS 101:2020 |
Methods of sampling and test for paints varnishes and related products Part 7 environmental tests on paint films Sec 3 resistance to heat Third Revision | |
|
CHD 20 (15010)
Revision of: IS 101:2020 |
Methods of sampling and test for paints varnishes and related products Part 1 test on liquid paints General And Physical Sec 7 mass per ten litres Third Revision | |
|
CHD 20 (15011)
Revision of: IS 101:2020 |
Methods of sampling and test for paints varnishes and related products Part 4 Optical test Sec 4 gloss Third Revision | |
|
CHD 20 (15012)
Revision of: IS 101:1989 |
Methods of sampling and test for paints varnishes and related products Part 4 optical tests Sec 2 colour Third Revision | |
|
CHD 20 (15388)
|
Ready Mixed Paint Air Drying Red Oxide Zinc Chrome Priming Amendment - 3 | |
|
CHD 20 (15708)
Revision of: IS 16719:2018 |
SOLVENT FREE POLYURETHANE COATINGS FOR EXTERIOR OF STEEL PIPE FITTINGS SPECIFICATION First Revision | |
|
CHD 20 (16070)
Revision of: IS 13238:1991 |
EPOXY BASED ZINC PHOSPHATE PRIMER TWO PACK - SPECIFICATION FIRST REVISION | |
|
CHD 20 (16648)
Revision of: IS 101:1993 |
Methods of sampling and test for paints varnishes and related products Part 8 Tests for Pigments and other Solids Section 5 Lead Restriction Test | |
|
CHD 20 (16848)
|
Draft Amendment No 2 January 2021 To IS 168 2016 Ready mixed paint air drying for general purpose - Specification Fourth Revision | |
|
CHD 20 (16849)
|
Draft Amendment No 1 January 2021 To IS 16361 2015 Thermoplastic Polymer based Coating a Undercoating b Finishing Specification Thermoplastic polymer based coatings A undercoating B finishing - Specification Amendment - 1 | |
|
CHD 20 (17799)
Revision of: IS 101:2016 |
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 2 TEST ON LIQUID PAINTS CHEMICAL EXAMINATION SECTION 4 DETERMINATION OF VOLATILE ORGANIC COMPOUND VOC AND OR SEMI VOLATILE ORGANIC COMPOUNDS SVOC CONTENT GAS-CHROMATOGRAPHIC | |
|
CHD 20 (17800)
Revision of: IS 101:2015 |
Methods of sampling and test for paints varnishes and related products Part 1 Test on liquid paints General and Physical Section 8 Pigments and extenders Determination of pH value of an aqueous suspension First Revision | |
|
CHD 20 (17805)
Revision of: IS 101:2019 |
Method of sampling and test of paints varnishes and related products Part 3 Test on paint film formation Section 5 Determination of fineness of grind Fifth Revision | |
|
CHD 20 (17807)
Revision of: IS 101:2018 |
Methods of sampling and test for paints varnishes and related products Part 10 Instrumental Analysis Section 1 Particle Size Analysis- Laser Diffraction Methods First Revision | |
|
CHD 20 (17883)
Revision of: IS 164:2015 |
Ready mixed paint for road marking-Specification | |
|
CHD 20 (17886)
Revision of: IS 5691:1970 |
Lacquer cellulose nitrate pigmented finishing glossy- Specification First revision | |
|
CHD 20 (19072)
Revision of: IS 2074:2015 |
READY MIXED PAINT AIR DRYING RED OXIDE ZINC CHROME PRIMING SPECIFICATION Fourth Revision | |
|
CHD 20 (20397)
Revision of: IS 5083:1988 |
Knifing stopper for Railway coaches-Specification third revision | |
|
CHD 20 (20403)
Revision of: IS 133:2013 |
Enamel interior A undercoating B finishing - Specification | |
|
CHD 20 (20407)
Revision of: IS 101:1986 |
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 1 TESTS ON LIQUID PAINTS GENERAL AND PHYSICAL Section 1 Sampling | |
|
CHD 20 (20535)
Revision of: IS 6127:1971 |
VARNISH SPAR AND FUNGICIDAL- SPECIFICATION FIRST REVISION | |
|
CHD 20 (20536)
Revision of: IS 344:1976 |
VARNISH STOVING - SPECIFICATION SECOND REVISION | |
|
CHD 20 (20537)
Revision of: IS 347:1975 |
VARNISH SHELLAC FOR GENERAL PURPOSES -SPECIFICATION SECOND REVISION | |
|
CHD 20 (20627)
Revision of: IS 524:1983 |
Varnish for General Purpose Specification Third Revision | |
|
CHD 20 (20666)
Revision of: IS 8662:2004 |
ENAMEL SYNTHETIC UNDERCOATING AND FINISHING FOR EXTERIOR OF RAILWAY COACHES SPECIFICATION Third revision | |
|
CHD 20 (21142)
Revision of: IS 101:1987 |
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 1 TEST ON LIQUID PAINTS GENERAL AND PHYSICAL SEC 2 PRELIMINARY EXAMINATION AND PREPARATION OF SAMPLES FOR TESTING | |
|
CHD 20 (21250)
Revision of: IS 419:1967 |
PUTTY FOR USE ON WINDOW FRAMES-SPECIFICATION | |
|
CHD 20 (21254)
Revision of: IS 101:1989 |
METHODS OF SAMPLE AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 1 TESTS ON LIQUID PAINTS GENERAL AND PHYSICAL SECTION 5 CONSISTENCY Fourth Revision | |
|
CHD 20 (21296)
Revision of: IS 1303:1983 |
Paints Glossary of Terms Third Revision | |
|
CHD 20 (21329)
Revision of: IS 5661:1970 |
PACKING AND MARKING OF PACKAGES OF PAINTS ENAMELS VARNISHES AND ALLIED PRODUCTS- CODE OF PRACTICE First Revision | |
|
CHD 20 (21405)
Revision of: IS 8098:1976 |
Finishing of Automobile Bodies Code of Practice Part 1 Finishing of Passenger Cars First Revision | |
|
CHD 20 (21467)
Revision of: IS 8098:1981 |
FINISHING OF AUTOMOBILE BODIES - CODE OF PRACTICEPART 2 REFINISHING OF PASSENGER CARS First Revision | |
|
CHD 20 (23101)
|
Cement paint - Specification Second Revision Amendment - 1 | |
|
CHD 20 (23715)
|
METHODS OF SAMPLING AND TEST OF PAINTS VARNISHES AND RELATED PRODUCTS PART 3 TEST ON PAINT FILM FORMATION Section 6 Determination of the Surface Tension of Liquid Using the Pendant Drop Method | |
|
CHD 20 (23791)
Revision of: IS 101:1987 |
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS Part 1 Tests on Liquid Paints General and Physical Section 4 Brushing Test Fourth Revision | |
|
CHD 20 (23876)
|
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 5 MECHANICAL TESTS SEC 6 Determination of resistance to abrasion by abrasive-paper covered wheels and rotating test specimen | |
|
CHD 20 (23878)
|
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 5 MECHANICAL TESTS SEC 7 Determination of resistance to abrasion by abrasive rubber wheels and rotating test specimen | |
|
CHD 20 (23879)
|
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 5 MECHANICAL TESTS SEC 8 Determination of resistance to abrasion by abrasive-paper covered wheel and linearly reciprocating test specimen | |
|
CHD 20 (24045)
|
Ready Mixed Paint Air Drying Red Oxide Zinc Chrome Priming -Specification Fourth Revision Amendment - 1 | |
|
CHD 20 (24048)
Revision of: IS 15489:2013 |
Paint Plastic Emulsion Specification Second Revision | |
|
CHD 20 (24194)
Revision of: IS 159:1981 |
Ready Mixed Paint Brushing Acid Resisting Specification Second Revision | |
|
CHD 20 (24203)
Revision of: IS 168:2016 |
Ready Mixed Paint Air Drying for General Purpose Specification Fifth Revision | |
|
CHD 20 (24205)
Revision of: IS 16676:2017 |
Solventless Liquid Epoxy System for Application on Interior and Exterior Surfaces of Steel Water Pipeline Specification First Revision | |
|
CHD 20 (24206)
Revision of: IS 5666:1970 |
Etch Primer Specification First Revision | |
|
CHD 20 (25149)
|
POLYMER COATED INNER TANKS FOR STORAGE WATER HEATER SPECIFICATION | |
|
CHD 20 (25259)
|
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 11 Evaluation of degradation of coatings Designation of quantity and size of defects and of intensity of uniform changes in appearance Sec 1 General introduction and designation system | |
|
CHD 20 (25261)
|
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 11 Evaluation of degradation of coatings - Designation of quantity and size of defects and of intensity of uniform changes in appearance Sec 2 Assessment of degree of blistering | |
|
CHD 20 (25263)
|
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 11 Evaluation of degradation of coatings -Designation of quantity and size of defects and of intensity of uniform changes in appearance Sec 4 Assessment of degree of cracking | |
|
CHD 20 (25264)
|
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 11 Evaluation of degradation of coatings - Designation of quantity and size of defects and of intensity of uniform changes in appearance Sec 5 Assessment of degree of flaking | |
|
CHD 20 (25267)
|
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 11 Evaluation of degradation of coatings - Designation of quantity and size of defects and of intensity of uniform changes in appearance Sec 6 Assessment of degree of chalking by tape method | |
|
CHD 20 (25269)
|
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 11 Evaluation of degradation of coatings - Designation of quantity and size of defects and of intensity of uniform changes in appearance Sec 7 Assessment of degree of chalking by velvet method | |
|
CHD 20 (25419)
|
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 11 Evaluation of degradation of coatings - Designation of quantity and size of defects and of intensity of uniform changes in appearance Sec 8 Assessment of degree of delamination and corrosion around a scribe or other artificial defect | |
|
CHD 20 (25427)
|
Methods of Sampling and Test for Paints Varnishes and Related Products Part 11 Evaluation of Degradation of Coatings- Designation of Quantity and Size of Defects and of Intensity of Uniform Changes in Appearance Sec 10 Assessment of degree of filiform corrosion | |
|
CHD 20 (25438)
|
METHODS OF SAMPLING AND TEST FOR PAINTS VARNISHES AND RELATED PRODUCTS PART 11 Evaluation of degradation of coatings- Designation of quantity and size of defects and of intensity of uniform changes in appearance Sec 3 Assessment of degree of rusting | |
|
CHD 20 (26399)
Revision of: IS 101:1989 |
Methods of Sampling and Test for Paints Varnishes and Related Products Part 3 Tests on Paint Film Formation Sec 2 Determination of film thickness Fourth Revision | |
|
CHD 20 (26400)
Revision of: IS 101:1986 |
Methods of Sampling and Test for Paints Varnishes and Related Products Part 2 test on liquid paints chemical examination Sec 2 Determination of non-volatile-matter content Fourth Revision | |
|
CHD 20 (26567)
Revision of: IS 2932:2013 |
Air Drying Enamel Paint for Architectural and Industrial Applications - Specification Fifth Revision | |
|
CHD 20 (26568)
Revision of: IS 6125:2017 |
Stoving Enamel Paint for General Industrial Applications - Specification Second Revision | |
|
CHD 20 (28838)
Revision of: IS 101:2020 |
Methods of Sampling and Test for Paints Varnishes and Related Products Part 1 Test on Liquid Paints General and Physical Section 7 Mass per 10 litres - Determination of Density - Pycnometer Method Fifth Revision | |
|
CHD 20 (33028)
|
Methods of sampling and test for paints varnishes and related products Part 4 optical test Sec 1 opacity Hiding Power Fourth Revision | |
|
CHD 20 (33032)
|
Methods of sampling and test for paints varnishes and related products Part 4 optical tests Sec 3 light fastness test Fourth Revision | |
|
CHD 20 (33033)
|
Methods of sampling and test for paints varnishes and related products Part 5 Mechanical tests Sec 4 Print free test Fourth Revision | |
|
CHD 20 (33034)
|
Methods of sampling and test for paints varnishes and related products Part 3 tests on paint film formation Sec 1 drying time Fourth Revision | |
|
CHD 20 (33092)
|
Methods of sampling and test for paints varnishes and related products Part 5 Mechanical test on paint films Sec 1 hardness tests Fourth Revision | |
|
CHD 20 (33115)
|
Methods of sample and test for paints varnishes and related products Part 1 test on liquid paints general and physical Sec 5 consistency Fourth Revision | |
|
CHD 20 (33968)
|
Solvent-Borne Epoxy Based Zinc Phosphate Primer Two Pack Specification Second Revision | |
|
CHD 20 (33980)
|
Water-Borne Epoxy Based Zinc Phosphate Primer Two Pack Specification | |
|
CHD 20 (34028)
|
Methods of Sampling and Test for Paints Varnishes and Related Products Part 2 Test on Liquid Paints Chemical Examination Section 6 Determination of in-can free formaldehyde in Water-Dilutable Coating Materials |
|
|
IS 100:1950 |
Oil Paste for Paints for General Purposes Black |
|
|
IS 101 (Part 6/Sec 4):1991 |
Methods of sampling and test for paints varnishes and related products Part 6 durability tests on paint films Sec 4 degradation of coatings pictorial aids for evaluation Third Revision |
|
|
IS 101:1964 |
Methods of test for ready mixed paints and enamels |
|
|
IS 103:1962 |
Ready mixed paint brushing white lead for priming and general purposes |
|
|
IS 105:1950 |
Ready mixed paint brushing priming for enamels for use on metals tentative |
|
|
IS 106:1962 |
Ready mixed paint brushing priming for enamels for use on wood |
|
|
IS 107:1952 |
Ready mixed paint brushing red oxide-zinc chrome priming |
|
|
IS 108:1952 |
Ready mixed paint spraying red oxide-zinc chrome priming |
|
|
IS 111:1950 |
Ready mixed paint brushing undercoating exterior to Indian Standard Colours No 101 216 352 358 443 and 632 |
|
|
IS 112:1950 |
Paints tinted to various colour exterior undercoating spraying |
|
|
IS 113:1950 |
Paints interior undercoating brushing to No 101 sky blue No 216 eau-de-nil |
|
|
IS 114:1950 |
Paint interior undercoating spraying to No 101 sky blue No 216 eau-de-nil |
|
|
IS 115:1950 |
Paint exterior undercoating brushing matt finish to No 352 pale cream and No 632 dark admiralty grey |
|
|
IS 116:1950 |
Paint exterior undercoating spraying matt finish to No 352 pale cream and No 632 dark admiralty grey |
|
|
IS 117:1964 |
Ready Mixed Paint Brushing Finishing Exterior Semi-gloss For General Purposes To Indian Standard Colours No 101 To 104 169 174 216 217 219 275 278 280 281 283 352 To 354 358 To 365 384 To 388 397 410 442 To 444 |
|
|
IS 118:1962 |
Ready Mixed Paint Brushing Finishing Semi-gloss For General Purposes To Indian Standard Colours As Required |
|
|
IS 1188:1957 |
Brushing Oil Gloss Genuine Zinc Oxide For General Purposes |
|
|
IS 1189:1957 |
Oil Paste For Paints Yellow Ochre |
|
|
IS 119:1962 |
Ready Mixed Paint Brushing Finishing Semi-gloss For General Purposes To Indian Standard Colours As Required |
|
|
IS 120:1962 |
Ready Mixed Paint Brushing Finishing Semi-gloss for General Purposes To Indian Standard Colours No 537 538 540 541 570 And 574 |
|
|
IS 121:1962 |
Ready Mixed Paint Brushing Finishing Semi-gloss for General Purposes to Indian Standard Colours No 414 |
|
|
IS 122:1962 |
Ready Mixed Paint Brushing Finishing Semi-gloss for General Purposes to Indian Standard Colours No 411 412 and 413 |
|
|
IS 123:1962 |
Ready Mixed Paint Brushing Finishing Semi-Gloss for General Purposes to Indian Standard Colours |
|
|
IS 1232:1964 |
Ready mixed paint brushing yellow ochre semi-gloss for general purposes |
|
|
IS 1236:1958 |
Ready mixed paint oil gloss heat resisting to Indian Standards Colour No 360 deep buff |
|
|
IS 124 (Part 1):1976 |
Ready mixed paint brushing finishing semi-gloss for general purposes Part 1 |
|
|
IS 124 (Part 2):1979 |
Ready mixed paint brushing finishing semi-gloss for general purposes Part 2 |
|
|
IS 124 (Part 3):1979 |
Ready mixed paint brushing finishing semi-gloss for general purposes Part 3 |
|
|
IS 125:1962 |
Ready Mixed Paint Brushing Finishing Semi-gloss for General Purposes to Indian Standard Colour No 106 Navy Blue |
|
|
IS 1257:1958 |
Black Japan Type B Exterior |
|
|
IS 126:1962 |
Ready Mixed Paint Brushing Finishing Exterior Semi-gloss for General Purposes to Indian Standard Colour No 671 |
|
|
IS 127:1962 |
Ready Mixed Paint Brushing Finishing Exterior Semi-gloss For General Purposes White |
|
|
IS 12744:1989 |
Ready Mixed Paint Air Drying Red Oxide - Zinc Phosphate Priming |
|
|
IS 128:1962 |
Ready Mixed Paint Brushing Finishing Semi-gloss For General Purposes Black |
|
|
IS 129:1950 |
Paint tinted to various colours interior brushing finishing oil-gloss |
|
|
IS 130:1964 |
Ready mixed paint spraying finishing for railway wagon stock to Indian Standard Colours No 446 red oxide and red oxide colour unspecified Revised |
|
|
IS 132:1950 |
Ready Mixed Paint Spraying Exterior Oil Gloss for General Purposes to Indian Standard Colours |
|
|
IS 133:2004 |
Enamel Interior a Undercoating b Finishing |
|
|
IS 134:1950 |
Enamel Spraying Interior 1 Undercoating 2 Finishing Colour As Required |
|
|
IS 135:1952 |
Ready Mixed Paint Spraying Stoving Red Oxide-zinc Chrome Priming |
|
|
IS 136:1952 |
Ready Mixed Paint Brushing Stoving Red Oxide-zinc Chrome Priming |
|
|
IS 141:1950 |
Ready mixed paint spraying petrol resisting air drying for exterior painting of containers colours as required incorporated in IS 140 |
|
|
IS 143:1950 |
Ready mixed paint spraying petrol resisting stoving for exterior painting of containers colour as required |
|
|
IS 148:1950 |
Ready mixed paint brushing undercoating stoving for enamels and general purposes colour as required |
|
|
IS 149:1950 |
Ready mixed paint spraying undercoating stoving for enamels and general purposes colour as required |
|
|
IS 14947:2001 |
Enamel synthetic oil resistant air drying - Specification |
|
|
IS 152:1950 |
Ready mixed paint brushing stoving lead-free for general purposes colour as required |
|
|
IS 153:1950 |
Ready mixed paint spraying stoving lead-free for general purposes colour as required |
|
|
IS 154:1950 |
Ready mixed paint brushing dead black for use on metals |
|
|
IS 155:1950 |
Ready Mixed Paint Brushing Matt Black for Use on Wood |
|
|
IS 156:1950 |
Ready mixed paint brushing for use on floors colour as required |
|
|
IS 157:1950 |
Ready mixed paint brushing acid and alkali resisting lead-free for general purposes to Indian Standards Colours Nos 446 red oxide 437 signal red 632 dark admiralty grey and black and other colours as required |
|
|
IS 158:1981 |
Ready Mixed Paint Brushing Bituminous Black Lead-free Acid Alkali And Heat Resisting |
|
|
IS 160:1950 |
Acid Resisting Paint Spraying |
|
|
IS 161:1950 |
Heat resisting paint brushing matt |
|
|
IS 165:1950 |
Aluminium paint brushing for general purposes in dual container |
|
|
IS 166:1950 |
Aluminium paint spraying for general purposes in dual container |
|
|
IS 167:1950 |
Ready mixed paint thick white for lettering |
|
|
IS 169:1950 |
Ready mixed paint spraying quick drying matt lead-free for general purposes to Indian Standard colours amalgamated in IS 168 |
|
|
IS 1704:1960 |
Water fittings - Copper alloy float valves Horizontal Plunger Type - specification |
|
|
IS 197:1969 |
Methods of sampling and test for varnishes and lacquers |
|
|
IS 198:1978 |
Specification for varnish gold size First Revision |
|
|
IS 2468:1963 |
Whiting For Putty |
|
|
IS 2931:1964 |
Ready mixed paints brushing aluminium-zinc oxide composite primer |
|
|
IS 2932:2003 |
Enamel Synthetic Exterior a Undercoating b Finishing |
|
|
IS 2933 (Part 1):2013 |
Enamel exterior A undercoating B finishing - Specification Part 1 for domestic and decorative applications Second Revision |
|
|
IS 2933:2013 |
Enamel exterior a undercoating b finishing |
|
|
IS 337:1975 |
Specification for varnish finishing interior First Revision |
|
|
IS 338:1952 |
Varnish Undercoating Exterior Natural Resin |
|
|
IS 339:1952 |
Varnish undercoating exterior synthetic resin |
|
|
IS 34:1975 |
Basic carbonate of lead white lead for paints |
|
|
IS 345:1952 |
Wood Filter Transparent Liquid |
|
|
IS 346:1952 |
Spirit Varnish Clear Hard |
|
|
IS 3538:1966 |
Ready Mixed Paint Red Oxide Barium Chromate barium Potassium Chromate Primer |
|
|
IS 3540:1966 |
Barium Potassium Chromate For Paints |
|
|
IS 355:1952 |
Rosin For Paints And Varnishes |
|
|
IS 357:1952 |
Gum Dammar Pale For Paints And Varnishes |
|
|
IS 36:1979 |
Leaded Zinc Oxide For Paints |
|
|
IS 3631:1966 |
Ready Mixed Paint Finishing Exterior i Alkyd And ii Non-alkyd For General Purposes To Indian Standard Colours |
|
|
IS 3679:1966 |
Ready mixed paint stoving red oxide-barium chromate barium potassium chromate primer |
|
|
IS 37:1976 |
Lithopone |
|
|
IS 385:1979 |
Mixed liquid driers for paints |
|
|
IS 386:1962 |
Liquid driers concentrated for paints |
|
|
IS 39:1979 |
Basic Sulphate Of Lead For Paints |
|
|
IS 41:1950 |
Bone Black for Paints |
|
|
IS 42:1950 |
Vegetable Black For Paints |
|
|
IS 420:1953 |
Putty For Use On Metal Frames |
|
|
IS 421:1962 |
Jointing paste for bedding mouldings on coaching stock |
|
|
IS 426:1961 |
Paste Filler For Colour Coats |
|
|
IS 43:1950 |
Lamp Black For Paints |
|
|
IS 45:1950 |
Manufactured Red Oxides Of Iron For Paints |
|
|
IS 46:1950 |
Natural Red Oxides Of Iron For Paints |
|
|
IS 47:1950 |
Ochre For Paints |
|
|
IS 48:1950 |
Natural Sienna raw And Burnt For Paints |
|
|
IS 49:1950 |
Natural umber raw and burnt for paints |
|
|
IS 4903:1979 |
Guide for treatment and disposal of effluents of cane sugar industry |
|
|
IS 52:1950 |
Cadmium lithopone for paints |
|
|
IS 520:1954 |
Enamel brushing exterior type 1 synthetic 1 undercoating 2 finishing colour as required tentative |
|
|
IS 521:1954 |
Enamel spraying exterior type 1 synthetic 1 undercoating 2 finishing colour as required tentative |
|
|
IS 522:1954 |
Enamel brushing exterior type 2 1 undercoating 2 finishing colour as required tentative |
|
|
IS 523:1954 |
Enamel spraying exterior type 2 1 undercoating 2 finishing colour as required tentative |
|
|
IS 525:1968 |
Specification for varnish finishing exterior and general purposes First Revision |
|
|
IS 53:1988 |
Brunswick green for paints |
|
|
IS 5411 (Part 1):1974 |
Plastic emulsion paint Part 1 For interior use |
|
|
IS 5411 (Part 2):1972 |
Plastic emulsion paint Part 2 For exterior use |
|
|
IS 5660:1970 |
Ready mixed paint brushing aluminium-red oxide primer |
|
|
IS 57:1989 |
Red Lead for Paints and Other Purposes |
|
|
IS 59:1950 |
Pigment Dyestuff For Paints |
|
|
IS 60:1950 |
Lake pigments for paints |
|
|
IS 61:1988 |
Slate Powder For Paints |
|
|
IS 640:1956 |
Ready mixed red oxide paint for hessian colour unspecified |
|
|
IS 641:1964 |
Ready mixed paint brushing finishing interior semi-gloss for general purposes white |
|
|
IS 643:1955 |
Cyclohexane hexahydrobenzene for paints |
|
|
IS 645:1955 |
Decalin decahydronaphthalene for paints |
|
|
IS 65:1950 |
Blanc Fixe For Paints |
|
|
IS 6646:1972 |
Oil of turpentine solvent grade |
|
|
IS 6667:1972 |
Glossary of terms used in synthetic resin industry |
|
|
IS 69:1950 |
Gypsum calcium sulphate for paints |
|
|
IS 71:1950 |
Mercuric Oxide For Paints |
|
|
IS 72:1950 |
Aluminium Powder For Paints |
|
|
IS 76:1950 |
Linseed Oil Refined For Paints |
|
|
IS 78:1950 |
Linseed oil pale boiled for paints |
|
|
IS 83:1950 |
Turpentine for paints |
|
|
IS 84:1950 |
White Spirit For Paints |
|
|
IS 85:1950 |
Methods of test for oil pastes for paints |
|
|
IS 86:1950 |
Oil paste for paints to Indian Standard colours |
|
|
IS 8662:2024 |
Enamel synthetic - undercoating and finishing for exterior of railway coaches - Specification Third Revision |
|
|
IS 87:1950 |
Oil paste for paints to Indian Standard colour No 105 Oxford blue |
|
|
IS 870:1962 |
Ready Mixed Paint Brushing Finishing Egg Shell Gloss for Interior Use to Indian Standard Colours |
|
|
IS 871:1956 |
Green paint interior |
|
|
IS 872:1956 |
Brown paint interior brushing finishing egg-shell gloss No 412 dark brown No 413 nut brown |
|
|
IS 88:1950 |
Oil paste for paints to Indian Standard colour No 106 Royal blue |
|
|
IS 89:1950 |
Oil paste for paints to Indian Standard colours |
|
|
IS 90:1950 |
Oil paste for paints to Indian Standard colour No 414 Golden brown |
|
|
IS 9034:2018 Decision taken to Reaffirm and Archive |
Enamel synthetic exterior air drying for use on primed surfaces of motor vehicles and other equipment - Specification First Revision |
|
|
IS 91:1950 |
Oil paste for paints to Indian Standard colours |
|
|
IS 92:1950 |
Oil paste for paints to Indian Standard colours |
|
|
IS 93:1950 |
Oil paste for paints to Indian Standard colours |
|
|
IS 95:1950 |
Oil paste for paints exterior white |
|
|
IS 96:1985 |
oil paste for paints interior white |
|
|
IS 97:1950 |
Oil Paste For Paints Jointing Purposes Etc White Lead |
|
|
IS 98:1950 |
Oil Paste For Paints Zinc Oxide |
|
|
IS 99:1950 |
Oil Paste For Paints Zinc Oxide Reduced |
|
IS 10018:1981 |
Specification for lacquer cellulose nitrate clear finishing glossy for wood |
|
|
IS 104:2017 |
Specification for ready mixed paint brushing zinc chrome priming Third Revision |
|
|
IS 109:2017 |
Specification for ready mixed paint finishing priming plaster to indian standard colour no 361 light stone and no 631 light grey white and off - White Second Revision |
|
|
IS 110:2017 |
Ready mixed paint brushing grey filler for enamels for use over primers - Specification Third Revision |
|
|
IS 11883:2017 |
Ready mixed paint brushing red oxide priming for metals specification First Revision |
|
|
IS 12744 (Part 1):2013 |
Ready mixed paint air drying red oxide - zinc phosphate priming - Specification Part 1 for domestic and decoratvie applications First Revision |
|
|
IS 13183:1991 |
Aluminium paint heat resistant - Specification |
|
|
IS 13184:1991 |
Mastic filler epoxy based - Specification |
|
|
IS 13213:2018 |
Polyurethane full gloss enamel Two Pack - Specification First Revision |
|
|
IS 13238:2021 |
Epoxy based zinc phosphate primer two pack - Specification First Revision |
|
|
IS 13239:2016 |
Epoxy surfacer Two Pack - Specification First Revision |
|
|
IS 133 (Part 1):2023 |
Enamel interior - undercoating and finishing - Specification Sixth Revision |
|
|
IS 13607:1992 |
Heady mixed paint finishing general purposes synthetic - Specification |
|
|
IS 137:2017 |
Ready mixed paint brushing matt or eggshell flat finishing interior to indian standard colour as required - Specification Second Revision |
|
|
IS 13759:2017 |
Polyurethane primer zinc phosphate Two - Pack for exterior painting of railway coaches - Specification First Revision |
|
|
IS 13798:1993 |
Polyurethane base knifing filler Two Pack for exterior painting of railway coaches - Specification |
|
|
IS 13799:2016 |
Polyurethane Base Surfacer Two Pack for Exterior Painting of Railway Coaches - Specification |
|
|
IS 13871:2021 |
Powder coating - Specification |
|
|
IS 139:2018 Decision taken to Reaffirm and Archive |
Ready mixed paint marking quick drying for marking with rubber stamps - Specification Third Revision |
|
|
IS 140:2015 |
Ready mixed paint exterior petrol resisting air drying - Specification Second Revision |
|
|
IS 1419:1989 |
Antifouling paint brushing for ships bottom and hulls - Specification Second Revision |
|
|
IS 142:2017 |
Specification for ready mixed paint exterior petrol resisting stoving Second Revision |
|
|
IS 14209:2016 |
Epoxy enamel two component glossy - Specification First Revision |
|
|
IS 14314:1995 |
Thinner general purpose for synthetic paints and varnishes - Specification |
|
|
IS 144:1950 |
Specification for ready mixed paint brushing petrol resisting air - Drying for interior painting of tanks and container red oxide Colour Unspecified |
|
|
IS 145:1950 |
Specification for ready mixed paint slushing petrol resisting air - Drying for interior painting of tanks and - Containers red oxide Colour Unspecified |
|
|
IS 14506:1998 |
Epoxy redoxide zinc phosphate weldable primer two component - Specification |
|
|
IS 14589:1999 Reaffirmed but not taken up for revision |
Zinc priming paint epoxy based two - Pack - Specification |
|
|
IS 146:1950 |
Specification for ready mixed paint brushing petrol resisting stoving for interior painting of tanks and containers red oxide Colour Unspecified |
|
|
IS 147:1950 Reaffirmed but not taken up for revision |
Specification for ready mixed paint slushing petrol resisting stoving for interior painting of tanks and containers red oxide Colour Unspecified |
|
|
IS 14946:2001 |
Zinc ethyl silicate primer two components - Specification |
|
|
IS 14948:2001 |
Paint coal tar epoxy two pack black and brown Base and Hardner - Specification |
|
|
IS 150:1950 |
Specification for ready mixed paint brushing finishing stoving enamel colour as required |
|
|
IS 151:2017 |
Ready mixed paint spraying finishing stoving enamel for general purposes colour as required - Specification Second Revision |
|
|
IS 15489:2024 |
Paint Plastic Emulsion Specification Second Revision |
|
|
IS 159:2024 |
Ready Mixed Paint Brushing Acid Resisting Specification Second Revision |
|
|
IS 16239:2021 |
Polyurethane Matt Finish TWO PACK - Specification |
|
|
IS 16361:2015 |
Thermoplastic polymer based coatings A undercoating B finishing - Specification |
|
|
IS 164:2023 |
Ready mixed paint for road marking - Specification Third Revision |
|
|
IS 16676:2024 |
Solventless Liquid Epoxy System for Application on Interior and Exterior Surfaces of Steel Water Pipeline Specification First Revision |
|
|
IS 16719:2022 |
Solvent free polyurethane coatings for exterior of steel pipe fittings - Specification First Revision |
|
|
IS 168:2024 |
Ready Mixed Paint Air Drying for General Purpose Specification Fifth Revision |
|
|
IS 16942:2018 Decision taken to Reaffirm and Archive |
Silicone soya alkyd exterior paint - Specification |
|
|
IS 16943:2019 |
Two components high build epoxy micaceous iron oxide MIO pigmented intermediate coat - Specification |
|
|
IS 16944:2018 |
Two components high build epoxy titanium dioxide TiO2 pigmented intermediate coat - Specification |
|
|
IS 17072:2019 |
Non plastic biodegradable polymer based paper coating chemical |
|
|
IS 17218:2019 Decision taken to Reaffirm and Archive |
Solar Thermo-Reflective Exterior Coating for Cooling of Roof Top |
|
|
IS 17545:2021 |
White cement based polymeric putty |
|
|
IS 18751:2024 |
Polymer Coated Inner tanks for Storage Water Heater - Specification |
|
|
IS 2074:2023 |
Ready Mixed Paint Air Drying Red Oxide Zinc Chrome Priming -Specification Fourth Revision |
|
|
IS 2075:2017 |
Ready mixed paint stoving red oxide zinc chrome priming - Specification Third Revision |
|
|
IS 2339:2013 |
Aluminium paints for general purposes - Specification First Revision |
|
|
IS 2932:2025 |
Air Drying Enamel Paint for Architectural and Industrial Applications - Specification Fifth Revision |
|
|
IS 341:2016 |
Black japan types a b and c - Specification Second Revision |
|
|
IS 344:2023 |
Varnish stoving - Specification Second Revision |
|
|
IS 347:2023 |
Varnish shellac for general purposes - Specification Second Revision |
|
|
IS 348:1968 Reaffirmed but not taken up for revision |
Specification for french polish First Revision |
|
|
IS 3536:2016 |
Ready mixed paint brushing wood primer - Specification Second Revision |
|
|
IS 3537:2017 |
Ready mixed paint finishing interior for general purposes to indian standard colours - Specification First Revision |
|
|
IS 3539:1966 |
Specification for ready mixed paint undercoating for use under oil finishes to indian standard colours as required |
|
|
IS 3585:2018 Decision taken to Reaffirm and Archive |
Ready mixed paint aluminium brushing priming water resistant for woodwork - Specification First Revision |
|
|
IS 3678:2016 |
Ready mixed paint thick white for lettering - Specification First Revision |
|
|
IS 3709:1966 Reaffirmed but not taken up for revision |
Specification for mastic cement for bedding of metal windows |
|
|
IS 419:2023 |
Putty for use on window frames - Specification Second Revision |
|
|
IS 423:1961 Reaffirmed but not taken up for revision |
Specification for Plastic wood for joiners filler Revised |
|
|
IS 427:2013 |
Distemper dry colour as required - Specification Third Revision |
|
|
IS 428:2013 |
Washable distemper - Specification Third Revision |
|
|
IS 430:1972 Decision taken to Reaffirm and Archive |
Specification for paint remover solvent type non - Flammable Second Revision |
|
|
IS 431:1972 Decision taken to Reaffirm and Archive |
Specification for paint remover solvent type flammable Second Revision |
|
|
IS 5083:2023 |
Knifing stopper for railway coaches-Specification Third Revision |
|
|
IS 524:2024 |
Varnish for General Purpose - Specification Third Revision |
|
|
IS 5410:2013 |
Cement paint - Specification Second Revision |
|
|
IS 5666:2024 |
Etch Primer Specification First Revision |
|
|
IS 5667:1970 |
Specification for thinner for cellulose nitrate based paints and lacquers |
|
|
IS 5691:2024 |
Lacquer cellulose nitrate pigmented finishing glossy Specification First revision |
|
|
IS 6125:2025 |
Stoving Enamel Paint for General Industrial Applications - Specification Second Revision |
|
|
IS 6126:1971 |
Specification for nitrocellulose surfacer |
|
|
IS 6127:2023 |
Varnish spar and fungicidal - specification First Revision |
|
|
IS 6714:1989 |
Ready mixed paint finishing non - slip deck - Specification First Revision |
|
|
IS 6948:1973 |
Specification for ready mixed paint undercoat synthetic for ships |
|
|
IS 6951:1973 |
Specification for ready mixed paint finishing exterior for ships |
|
|
IS 7164:1973 Reaffirmed but not taken up for revision |
Specification for stopper |
|
|
IS 8982:2019 |
Ready mixed paint finishing air-drying for war equipment - Specification Second Revision |
|
|
IS 8983:2018 |
Ready mixed paint finishing stoving for war equipment - Specification First Revision |
|
|
IS 9862:2017 |
Specification for ready mixed paint brushing bituminous black acid alkali water and chlorine resistlng First Revision |