BUREAU OF INDIAN STANDARDS
Programme of Work
CED3 : Sanitary Appliances And Water Fittings
- Scope : Glazed Earthenware and Vitreous Sanitary Appliances, Including Water Closets, Flushing Cisterns, Bath Tubs, Non-ferrous Waste Fittings for Wash Basins and Sinks, Traps, Waste Plugs and Accessories for Wash Basins, Manhole Covers for Use in Drainage Works (Except Concrete), Taps and Valves, Ball Valves, Copper and Plastic Floats for Ball Valves, Caulking Lead, Ferrules, Plug Cocks, Foot Valves, Surface Boxes, Stoneware Pipes, Water Meters, Water Meter Boxes, Sluice Valves, and Stainless Steel and Plastic Water Tanks.
-
Liaison :ISO/PC 316 - Water efficient products - Rating - Participating (P)
ISO/PC 316/WG 1
|
IS 11246:1992 Reviewed In : 2022 |
Glass fibre reinforced polyester resin (GRP) squatting pans - Specification (First Revision)
|
October, 2022
|
1
|
Indigenous
|
|
|
IS 12234:2021 |
Plastic equilibrium float valves for cold water services - Specification (first revision)
|
-
|
Indigenous
|
||
|
IS 12701:1996 Reviewed In : 2022 |
Rotational moulded polyethylene water storage tanks - specification (First Revision)
|
March, 2022
|
2
|
Indigenous
|
|
|
IS 13049:1991 Reviewed In : 2022 |
Diaphragm type (plastic body) float operated valves for cold water services - Specification
|
October, 2022
|
2
|
||
|
IS 13114:1991 Reviewed In : 2022 |
Forged brass gate, globe and check valves for water works purposes - Specification
|
October, 2022
|
-
|
||
|
IS 13349:1992 Reviewed In : 2022 |
Cast iron single faced thimble mounted sluice gates - Specification
|
October, 2022
|
1
|
||
|
IS 13983:1994 Reviewed In : 2019 |
Stainless steel sinks for domestic purposes - Specification
|
October, 2019
|
3
|
||
|
IS 14399 (Part 1):1996 Reviewed In : 2022 |
Hot Press Moulded Thermosetting Glass Fibre Reinforced Polyester Resin (GRP) Sectional Water Storage Tanks : PART 1 SPECIFICATION FOR PANELS
|
March, 2022
|
1
|
||
|
IS 14399 (Part 12):1996 Reviewed In : 2022 |
Hot press moulded thermosetting glass fibre reinforced polyester resin (GRP) sectional water storage tanks: Part 1 Specification for panels: Part 2 Guidelines for assembly, installation and testing
|
March, 2022
|
-
|
||
|
IS 14845:2000 Reviewed In : 2020 |
Resilient seated cast iron air relief valves for water works purposes - Specification
|
November, 2020
|
1
|
Indigenous
|
|
|
IS 14846:2000 Reviewed In : 2020 |
Sluice valve for water works purposes (50 To 1200 mm size) - Specification
|
November, 2020
|
4
|
Indigenous
|
|
|
IS 1701:1960 Reviewed In : 2022 |
Specification for mixing valves for ablutionary and doimestic purposes
|
October, 2022
|
-
|
Indigenous
|
|
|
IS 1703:2000 Reviewed In : 2020 |
Water fittings - copper alloy float valves (horizontal plunger type) - Specification (fourth revision)
|
November, 2020
|
1
|
||
|
IS 1711:1984 Reviewed In : 2020 |
Specification for self - Closing taps for water supply purposes (second revision)
|
November, 2020
|
-
|
Indigenous
|
|
|
IS 1726:1991 Reviewed In : 2022 |
Cast iron manhole covers and frames - Specification (Third Revision)
|
October, 2022
|
-
|
Indigenous
|
|
|
IS 17585:2021 |
Beta (Outflow) valves for gravity type flushing cisterns - Specification
|
-
|
Indigenous
|
||
|
IS 17650 (Part 1):2021 |
Water efficient plumbing products - Requirements: Part 1 Sanitaryware
|
-
|
Indigenous
|
||
|
IS 17650 (Part 2):2021 |
Water efficient plumbing products - Requirements: Part 2 Sanitary fittings
|
-
|
Indigenous
|
||
|
IS 1795:1982 Reviewed In : 2020 |
Specification for pillar taps for water supply purposes (second revision)
|
November, 2020
|
-
|
Indigenous
|
|
|
IS 19315:2025 |
Ball Valves for Water Works Purposes - Specification
|
-
|
Indigenous
|
||
|
IS 2373:1981 Reviewed In : 2022 |
Specification for water meters (bulk type) (third revision)
|
October, 2022
|
3
|
||
|
IS 2548 (Part 1):1996 Reviewed In : 2022 |
Plastic seats and covers for water - Closets - Specification: Part 1 thermoset seats and covers (Fifth Revision)
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 2548 (Part 2):1996 Reviewed In : 2022 |
Plastic seats and covers for water - Closets - Specification: Part 2 Thermoplastic seats and covers (Fifth Revision)
|
March, 2022
|
3
|
Indigenous
|
|
|
IS 2556 (Part 1):2021 |
Vitreous China sanitary appliances - Specification: Part 1 General requirements (fourth revision)
|
-
|
Indigenous
|
||
|
IS 2556 (Part 2):2024 |
Vitreous China Sanitary Appliances - Specification Part 2 Specific Requirements of Washdown Water Closets (sixth revision)
|
-
|
Indigenous
|
||
|
IS 2556 (Part 3):2024 |
Vitreous China Sanitary Appliances - Specification Part 3 Specific Requirements of Squatting Pans (sixth revision)
|
-
|
|||
|
IS 2556 (Part 4):2004 Reviewed In : 2019 |
Vitreous sanitary appliances (Vitreous China) - specification: Part 4 Specific requirements of wash basins (fourth revision)
|
October, 2019
|
3
|
Indigenous
|
|
|
IS 2556 (Part 5):1994 Reviewed In : 2019 |
Vitreous sanitary appliances (Vitreous China) - Specification: Part 5 Specific requirements of laboratory sinks (third revision)
|
October, 2019
|
3
|
Indigenous
|
|
|
IS 2556 (Part 6):2021 |
Vitreous China sanitary appliances - Specification: Part 6 Specific requirements of urinal and partition plates (fifth revision)
|
-
|
Indigenous
|
||
|
IS 2556 (Part 7):1995 Reviewed In : 2023 |
Vitreous sanitary appliances (Vitreous China) - Specification: Part 7 Specific requirements of accessories for sanitary appliances (third revision)
|
September, 2023
|
3
|
Indigenous
|
|
|
IS 2556 (Part 8):2021 |
Vitreous China sanitary appliances - Specification: Part 8 Specific requirements of close coupled and one-piece, pedestal washdown and syphonic water closets (sixth revision)
|
-
|
Indigenous
|
||
|
IS 2556 (Part 9):2004 Reviewed In : 2019 |
Vitreous sanitary appliances (Vitreous China) - Specification: Part 9 specific requirements of pedestal type bidets (Fifth Revision)
|
October, 2019
|
-
|
Indigenous
|
|
|
IS 2556 (Part 14):2024 |
Vitreous China Sanitary Appliances - Specification Part 14 Specific Requirements of Integrated Squatting Pans (Second Revision)
|
-
|
Indigenous
|
||
|
IS 2556 (Part 15):2024 |
Vitreous China Sanitary Appliances —Specification Part 15 Specific Requirements of Universal Water Closets (Third Revision)
|
-
|
Indigenous
|
||
|
IS 2556 (Part 16):2024 |
Vitreous China Sanitary Appliances —Specification Part 16 Specific Requirements of Washdown Wall Mounted Water Closets (First Revision)
|
-
|
Indigenous
|
||
|
IS 2556 (Part 17):2001 Reviewed In : 2022 |
Vitreous sanitary appliances (Vitreous China) - Specification: Part 17 Specific requirements of wall mounted bidets
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 2685:1971 Reviewed In : 2022 |
Code of practice for selection, installation and maintenance of sluice valves (First Revision)
|
October, 2022
|
2
|
Indigenous
|
|
|
IS 2692:1989 Reviewed In : 2023 |
Ferrules for water services - specification (second revision)
|
September, 2023
|
3
|
Indigenous
|
|
|
IS 2963:2013 Reviewed In : 2023 |
Copper Alloy Waste Fittings and Waste Plug for Wash Basin and Sinks - Specification (second revision) (amalgamating IS 3311)
|
September, 2023
|
-
|
||
|
IS 3004:1979 Reviewed In : 2020 |
Specification for plug cocks for water supply purposes (first revision)
|
November, 2020
|
-
|
||
|
IS 3006:1979 Reviewed In : 2022 |
Specification for chemically resistant glazed stoneware pipes and fittings (first revision)
|
October, 2022
|
-
|
||
|
IS 3042:1965 Reviewed In : 2023 Decision taken to Reaffirm and Archive |
Specification for single faced sluice gates (200 to 1200 mm)
|
September, 2023
|
-
|
||
|
IS 3950:1979 Reviewed In : 2022 |
Specification for surface boxes for sluice valves (first revision)
|
October, 2022
|
1
|
||
|
IS 4038:1986 Reviewed In : 2020 |
Specification for foot valves for water works purposes (second revision)
|
November, 2020
|
-
|
||
|
IS 4346:1982 Reviewed In : 2020 |
Specification for washers for use with fittings for water services (first revision)
|
November, 2020
|
-
|
||
|
IS 5219:2013 Reviewed In : 2023 |
Cast copper alloy traps - Specification (First Revision)
|
September, 2023
|
-
|
Indigenous
|
|
|
IS 5312 (Part 1):2004 Reviewed In : 2019 |
Swing check type reflux (non-return) valves for water works purposes - Specification: Part 1 Single door pattern (second revision)
|
October, 2019
|
2
|
||
|
IS 5312 (Part 2):2013 Reviewed In : 2023 |
Swing Check Type Reflux (Non-Return) Valves for Water Works Purpose - Specification Part 2 : Multi-Door Pattern
|
September, 2023
|
-
|
||
|
IS 5455:1969 Reviewed In : 2022 |
Specification for cast iron steps for manholes
|
October, 2022
|
-
|
Indigenous
|
|
|
IS 5961:1970 Reviewed In : 2022 |
Specification for cast iron gratings for drainage purposes
|
October, 2022
|
-
|
Indigenous
|
|
|
IS 6411:1985 Reviewed In : 2020 |
Specification for gel - Coated glass fibre reinforced polyester resin bath tubs (first revision)
|
November, 2020
|
-
|
Indigenous
|
|
|
IS 651:2007 Reviewed In : 2022 |
Glazed stoneware pipes and fittings - Specification (Sixth Revision)
|
October, 2022
|
2
|
Indigenous
|
|
|
IS 6784:1996 Reviewed In : 2022 |
Methods for performance testing of water meters (Domestic Type) (Second Revision)
|
March, 2022
|
1
|
Not Equivalent
|
|
|
IS 7231:2021 |
Plastic flushing cisterns for water closets and urinals - Specification (third revision)
|
-
|
Indigenous
|
||
|
IS 774:2021 |
Ceramic (Vitreous China) flushing cisterns for water closets and urinals - Specification (sixth revision)
|
-
|
Indigenous
|
||
|
IS 778:1984 Reviewed In : 2020 |
Specification for copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision)
|
November, 2020
|
4
|
Indigenous
|
|
|
IS 779:1994 Reviewed In : 2020 |
Water meters (Domestic Type) - Specification (Sixth Revision)
|
November, 2020
|
5
|
Not Equivalent
|
|
|
IS 781:1984 Reviewed In : 2020 |
Specification for cast copper alloy screw down bib taps and stop valves for water services (Third Revision)
|
November, 2020
|
2
|
Indigenous
|
|
|
IS 8931:2021 |
Copper alloy single taps, combination tap assemblies, stop valves and single lever mixers for water services — Specification (second revision)
|
-
|
Indigenous
|
||
|
IS 9140:1996 Reviewed In : 2022 |
Methods for sampling of vitreous and fire clay sanitary appliances (Second Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 9338:2013 Reviewed In : 2023 |
Cast iron/S.G. Iron/Cast Steel screw-down stop valves for water works purposes - Specification (second revision)
|
September, 2023
|
-
|
||
|
IS 9739:1981 Reviewed In : 2022 |
Specification for pressure reducing valves for domestic water supply systems
|
October, 2022
|
3
|
||
|
IS 9758:1981 Reviewed In : 2022 |
Specification for flush valves and fittings for water closets and urinals
|
October, 2022
|
2
|
Indigenous
|
|
|
IS 9762:1994 Reviewed In : 2019 |
Specification for polyethylene floats (Spherical) for float valves (first revision)
|
October, 2019
|
-
|
Indigenous
|
|
|
IS 9763:2000 Reviewed In : 2020 |
Plastics bib taps, pillar taps, angle valves and stop valves for hot and cold water services - Specification (second revision)
|
November, 2020
|
-
|
Indigenous
|
| No Records Found |
| No Records Found |
| No Records Found |
|
CED 3 (26381)
Revision of: IS 9758:1981 |
Flush ValveFlushometer and Fittings for Water Closets and Urinals - Specification first revision |
| No Records Found | ||
| No Records Found |
|
|
IS 1700:1973 |
Drinking Fountains |
|
|
IS 2104:1981 |
water meter boxes domestic type |
|
|
IS 2326:1987 Reviewed In : 2018 |
Automatic Flushing Cisterns for Urinals Other than Plastic Cisterns |
|
|
IS 2401:1973 |
Code of practice for selection installation and maintenance of domestic water meters |
|
|
IS 2556 (Part 10):1974 |
Vitreous Sanitary Appliances vitreous China Part 10 Specific Requirements Of Foot Rests |
|
|
IS 2556 (Part 11):1979 |
Vitreous sanitary appliances vitreous china Part 11 Specific requirements for shower rose |
|
|
IS 2556 (Part 12):1973 |
Vitreous sanitary appliances vitreous china Part 12 Specific requirements of floor traps |
|
|
IS 2556 (Part 13):1973 |
Vitreous sanitary appliances vitreous china Part 13 Specific requirements of traps for squatting pans |
|
|
IS 3311:1979 Reviewed In : 2007 |
Waste Plug And Its Accessories For Sinks And Wash-basins |
|
|
IS 3489:1985 |
Enamelled Steel Bath Tubs |
|
|
IS 5219 (Part 1):1969 Reviewed In : 2010 |
cast copper alloys traps Part 1 P and S traps |
|
|
IS 5434:1969 |
non-ferrous alloy bottle traps for marine use |
|
|
IS 5869:1970 |
Pillar Taps for Marine Use |
|
|
IS 5917:1970 |
vitreous vitreous china wash basins for marine use |
|
|
IS 6249:1971 |
flush valves and fittings for marine use |
|
|
IS 6251:1971 |
Shower and Shower Fittings for Marine Use |
|
|
IS 771 (Part 1):1979 Reviewed In : 2017 |
Specification for glazed fire - Clay sanitary appliances Part 1 general requirements |
|
|
IS 771 (Part 2):1985 Reviewed In : 2018 |
Specification for glazed fire - Clay sanitary appliances Part 2 specific requirements of kitchen and laboratory sinks Third Revision |
|
|
IS 771 (Part 3/Sec 1):1979 Reviewed In : 2017 |
Glazed Fire Clay Sanitary Appliances Part-3 Specific Requirements of Urinals Section 1 Slab Urinals |
|
|
IS 771 (Part 3/Sec 2):1985 Reviewed In : 2020 |
Glazed Fire-Clay Sanitary Appliances Part 3 Specific Requirements of Urinals Section 2 Stall Urinals |
|
|
IS 771 (Part 4):1979 Reviewed In : 2017 |
Specification for glazed fire - Clay sanitary appliances Part 4 specific requirements of post - Mortem slabs Second Reoision |
|
|
IS 771 (Part 5):1979 Reviewed In : 2017 |
Specification for glazed fire - Clay sanitary appliances Part 5 specific requirements of shower trays Second Revision |
|
|
IS 771 (Part 6):1979 Reviewed In : 2020 |
Specification for glazed fire - Clay sanitary appliances Part 6 specific requirements of bed pan sinks Second Reoision |
|
|
IS 771 (Part 7):1981 Reviewed In : 2017 |
Specification for glazed fire - Clay sanitary appliances Part 7 specific requirements of Second Revision |
|
|
IS 772:1973 Reviewed In : 2017 |
Specification for general requirements for enamelled cast iron sanitary appliances |
|
|
IS 773:1988 |
enamelled cast iron water-closets railway coaching stock type |
|
|
IS 775:1970 |
Cast Iron Brackets And Supports For Wash Basins And Sinks |
|
|
IS 776:1962 |
Wooden water closet seats and covers |
|
|
IS 780:1984 Reviewed In : 1995 |
sluice valves for water works purposes 50 to 300 mm size |
|
|
IS 782:1978 Reviewed In : 2017 |
Specification for caulking lead Third Revision |
|
|
IS 8718:1978 |
vitreous enamelled steel kitchen sinks |
|
|
IS 8719:1978 |
vitreous siphonic wash-down water closets for marine use |
|
|
IS 8727:1978 Reviewed In : 2000 |
vitreous enamelled steel wash bsins |
|
|
IS 8934:1978 |
Cast copper alloy fancy pillar taps for water services |
|
|
IS 9076:1979 |
vitreous integrated squatting pans for marine use |
|
IS 11246:1992 Reviewed In : 2022 |
Glass fibre reinforced polyester resin GRP squatting pans - Specification First Revision |
|
|
IS 12234:2021 |
Plastic equilibrium float valves for cold water services - Specification first revision |
|
|
IS 12701:1996 Reviewed In : 2022 |
Rotational moulded polyethylene water storage tanks - specification First Revision |
|
|
IS 13049:1991 Reviewed In : 2022 |
Diaphragm type plastic body float operated valves for cold water services - Specification |
|
|
IS 13114:1991 Reviewed In : 2022 |
Forged brass gate globe and check valves for water works purposes - Specification |
|
|
IS 13349:1992 Reviewed In : 2022 |
Cast iron single faced thimble mounted sluice gates - Specification |
|
|
IS 13983:1994 Reviewed In : 2019 |
Stainless steel sinks for domestic purposes - Specification |
|
|
IS 14399 (Part 1):1996 Reviewed In : 2022 |
Hot Press Moulded Thermosetting Glass Fibre Reinforced Polyester Resin GRP Sectional Water Storage Tanks PART 1 SPECIFICATION FOR PANELS |
|
|
IS 14845:2000 Reviewed In : 2020 |
Resilient seated cast iron air relief valves for water works purposes - Specification |
|
|
IS 14846:2000 Reviewed In : 2020 |
Sluice valve for water works purposes 50 To 1200 mm size - Specification |
|
|
IS 1701:1960 Reviewed In : 2022 |
Specification for mixing valves for ablutionary and doimestic purposes |
|
|
IS 1703:2000 Reviewed In : 2020 |
Water fittings - copper alloy float valves horizontal plunger type - Specification fourth revision |
|
|
IS 1711:1984 Reviewed In : 2020 |
Specification for self - Closing taps for water supply purposes second revision |
|
|
IS 1726:1991 Reviewed In : 2022 |
Cast iron manhole covers and frames - Specification Third Revision |
|
|
IS 17585:2021 |
Beta Outflow valves for gravity type flushing cisterns - Specification |
|
|
IS 17650 (Part 1):2021 |
Water efficient plumbing products - Requirements Part 1 Sanitaryware |
|
|
IS 17650 (Part 2):2021 |
Water efficient plumbing products - Requirements Part 2 Sanitary fittings |
|
|
IS 1795:1982 Reviewed In : 2020 |
Specification for pillar taps for water supply purposes second revision |
|
|
IS 19315:2025 |
Ball Valves for Water Works Purposes - Specification |
|
|
IS 2373:1981 Reviewed In : 2022 |
Specification for water meters bulk type third revision |
|
|
IS 2548 (Part 1):1996 Reviewed In : 2022 |
Plastic seats and covers for water - Closets - Specification Part 1 thermoset seats and covers Fifth Revision |
|
|
IS 2548 (Part 2):1996 Reviewed In : 2022 |
Plastic seats and covers for water - Closets - Specification Part 2 Thermoplastic seats and covers Fifth Revision |
|
|
IS 2556 (Part 1):2021 |
Vitreous China sanitary appliances - Specification Part 1 General requirements fourth revision |
|
|
IS 2556 (Part 2):2024 |
Vitreous China Sanitary Appliances - Specification Part 2 Specific Requirements of Washdown Water Closets sixth revision |
|
|
IS 2556 (Part 3):2024 |
Vitreous China Sanitary Appliances - Specification Part 3 Specific Requirements of Squatting Pans sixth revision |
|
|
IS 2556 (Part 4):2004 Reviewed In : 2019 |
Vitreous sanitary appliances Vitreous China - specification Part 4 Specific requirements of wash basins fourth revision |
|
|
IS 2556 (Part 5):1994 Reviewed In : 2019 |
Vitreous sanitary appliances Vitreous China - Specification Part 5 Specific requirements of laboratory sinks third revision |
|
|
IS 2556 (Part 6):2021 |
Vitreous China sanitary appliances - Specification Part 6 Specific requirements of urinal and partition plates fifth revision |
|
|
IS 2556 (Part 7):1995 Reviewed In : 2023 |
Vitreous sanitary appliances Vitreous China - Specification Part 7 Specific requirements of accessories for sanitary appliances third revision |
|
|
IS 2556 (Part 8):2021 |
Vitreous China sanitary appliances - Specification Part 8 Specific requirements of close coupled and one-piece pedestal washdown and syphonic water closets sixth revision |
|
|
IS 2556 (Part 9):2004 Reviewed In : 2019 |
Vitreous sanitary appliances Vitreous China - Specification Part 9 specific requirements of pedestal type bidets Fifth Revision |
|
|
IS 2556 (Part 14):2024 |
Vitreous China Sanitary Appliances - Specification Part 14 Specific Requirements of Integrated Squatting Pans Second Revision |
|
|
IS 2556 (Part 15):2024 |
Vitreous China Sanitary Appliances Specification Part 15 Specific Requirements of Universal Water Closets Third Revision |
|
|
IS 2556 (Part 16):2024 |
Vitreous China Sanitary Appliances Specification Part 16 Specific Requirements of Washdown Wall Mounted Water Closets First Revision |
|
|
IS 2556 (Part 17):2001 Reviewed In : 2022 |
Vitreous sanitary appliances Vitreous China - Specification Part 17 Specific requirements of wall mounted bidets |
|
|
IS 2692:1989 Reviewed In : 2023 |
Ferrules for water services - specification second revision |
|
|
IS 2963:2013 Reviewed In : 2023 |
Copper Alloy Waste Fittings and Waste Plug for Wash Basin and Sinks - Specification second revision amalgamating IS 3311 |
|
|
IS 3004:1979 Reviewed In : 2020 |
Specification for plug cocks for water supply purposes first revision |
|
|
IS 3006:1979 Reviewed In : 2022 |
Specification for chemically resistant glazed stoneware pipes and fittings first revision |
|
|
IS 3042:1965 Reviewed In : 2023 Decision taken to Reaffirm and Archive |
Specification for single faced sluice gates 200 to 1200 mm |
|
|
IS 3950:1979 Reviewed In : 2022 |
Specification for surface boxes for sluice valves first revision |
|
|
IS 4038:1986 Reviewed In : 2020 |
Specification for foot valves for water works purposes second revision |
|
|
IS 4346:1982 Reviewed In : 2020 |
Specification for washers for use with fittings for water services first revision |
|
|
IS 5219:2013 Reviewed In : 2023 |
Cast copper alloy traps - Specification First Revision |
|
|
IS 5312 (Part 1):2004 Reviewed In : 2019 |
Swing check type reflux non-return valves for water works purposes - Specification Part 1 Single door pattern second revision |
|
|
IS 5312 (Part 2):2013 Reviewed In : 2023 |
Swing Check Type Reflux Non-Return Valves for Water Works Purpose - Specification Part 2 Multi-Door Pattern |
|
|
IS 5455:1969 Reviewed In : 2022 |
Specification for cast iron steps for manholes |
|
|
IS 5961:1970 Reviewed In : 2022 |
Specification for cast iron gratings for drainage purposes |
|
|
IS 6411:1985 Reviewed In : 2020 |
Specification for gel - Coated glass fibre reinforced polyester resin bath tubs first revision |
|
|
IS 651:2007 Reviewed In : 2022 |
Glazed stoneware pipes and fittings - Specification Sixth Revision |
|
|
IS 7231:2021 |
Plastic flushing cisterns for water closets and urinals - Specification third revision |
|
|
IS 774:2021 |
Ceramic Vitreous China flushing cisterns for water closets and urinals - Specification sixth revision |
|
|
IS 778:1984 Reviewed In : 2020 |
Specification for copper alloy gate globe and check valves for waterworks purposes Fourth Revision |
|
|
IS 779:1994 Reviewed In : 2020 |
Water meters Domestic Type - Specification Sixth Revision |
|
|
IS 781:1984 Reviewed In : 2020 |
Specification for cast copper alloy screw down bib taps and stop valves for water services Third Revision |
|
|
IS 8931:2021 |
Copper alloy single taps combination tap assemblies stop valves and single lever mixers for water services Specification second revision |
|
|
IS 9338:2013 Reviewed In : 2023 |
Cast iron S G Iron Cast Steel screw-down stop valves for water works purposes - Specification second revision |
|
|
IS 9739:1981 Reviewed In : 2022 |
Specification for pressure reducing valves for domestic water supply systems |
|
|
IS 9758:1981 Reviewed In : 2022 |
Specification for flush valves and fittings for water closets and urinals |
|
|
IS 9762:1994 Reviewed In : 2019 |
Specification for polyethylene floats Spherical for float valves first revision |
|
|
IS 9763:2000 Reviewed In : 2020 |
Plastics bib taps pillar taps angle valves and stop valves for hot and cold water services - Specification second revision |