BUREAU OF INDIAN STANDARDS
Programme of Work
CED22 : Fire Fighting
- Scope : Standardization in the Field of: i) Fire Fighting Equipment Including Water Fittings ii) Fire Fighting Units iii) Fire Detection and Fire Alarm Systems, and iv) Helmets
-
Liaison :ISO/TC 21 - Equipment for fire protection and fire fighting - Observer (O)
ISO/TC 21/SC 11 - Smoke and heat control systems and components - Observer (O)
ISO/TC 21/SC 2 - Manually transportable fire extinguishers - Observer (O)
ISO/TC 21/SC 3 - Fire detection and alarm systems - Observer (O)
ISO/TC 21/SC 5 - Fixed firefighting systems using water - Observer (O)
ISO/TC 21/SC 6 - Foam and powder media and firefighting systems using foam and powder - Observer (O)
ISO/TC 21/SC 8 - Gaseous media and firefighting systems using gas - Observer (O)
|
IS 10460:1983 Reviewed In : 2020 |
FUNCTIONAL REQUIREMENTS FOR SMALL FOAM TENDER FOR FIRE BRIGADE USE
|
December, 2020
|
1
|
Indigenous
|
|
|
IS 10993:1984 Reviewed In : 2020 |
Functional requirements for 2000 kg dry powder tender for fire brigade use
|
December, 2020
|
1
|
||
|
IS 11101:1984 Reviewed In : 2022 |
Specification for extended branch pipe for fire brigade use
|
September, 2022
|
-
|
Indigenous
|
|
|
IS 11108:1984 Reviewed In : 2020 |
Specification for portable fire extinguishers - Halon 1211 type
|
December, 2020
|
4
|
Not Equivalent
|
|
|
IS 11833:1986 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Specification For Dry Powder Fire Extinguisher For Metal Fires
|
September, 2022
|
4
|
||
|
IS 12717:1989 Reviewed In : 2020 |
Fire fighting equipment - High capacity portable pump set (1100 - 1600 L/min) - Functional requirements
|
December, 2020
|
1
|
Indigenous
|
|
|
IS 12796:1989 Reviewed In : 2020 |
Fire rake - Specification
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 12805:1989 Reviewed In : 2020 |
Tool mcleod for fighting forest fires - Specification
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 12835 (Part 1):2021 |
Design And Installation Of Fixed Foam Fire Extinguishing System - Code Of Practice Part 1 Low Expansion Foam (First Revision)
|
-
|
Indigenous
|
||
|
IS 12853:1989 Reviewed In : 2020 |
Specification pulaski tool for forest fire
|
December, 2020
|
-
|
||
|
IS 12859:1989 Reviewed In : 2020 |
Fire fighting - Brush hook for forest fires - Specification
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 12861:1989 Reviewed In : 2020 |
Fire fighting - Double bit axe for forest fires - Specification
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 12862:1989 Reviewed In : 2020 |
Fire fighting - Shovel for forest fires - Specification
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 13039:2014 Reviewed In : 2024 |
External hydrant systems - provision and maintenance - Code of practice (First Revision)
|
June, 2024
|
-
|
||
|
IS 14851:2000 Reviewed In : 2020 |
Maintenance of fire hose - Code of practice
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 14933:2001 Reviewed In : 2020 |
High Pressure Fire Fighting Hose -Specification
|
December, 2020
|
-
|
||
|
IS 14951:2001 Reviewed In : 2020 |
Fire extinguisher - 135 litres capacity mechanical foam type - Specification
|
December, 2020
|
2
|
Indigenous
|
|
|
IS 15051:2001 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
High pressure fire hose delivery couplings - Specification
|
September, 2022
|
-
|
Indigenous
|
|
|
IS 15105:2021 |
Design and Installation of Fixed Automatic Sprinkler Fire Extinguishing Systems - Code of Practice (first revision)
|
-
|
Indigenous
|
||
|
IS 15220:2002 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Halogenated hydrocarbons - Halon 1211 and halon 1401 - Fire extinguishing media - Specification
|
September, 2022
|
-
|
Not Equivalent
|
|
|
IS 15221:2002 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Safe handling and transfer procedures of halon1211 and halon 1301 (Halogenated Hydrocarbons) - Fire extinguishing media - Code of practice
|
September, 2022
|
-
|
Not Equivalent
|
|
|
IS 15222:2002 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Carbon dioxide as fire extinguishing media for fire protection - Specification
|
September, 2022
|
-
|
Not Equivalent
|
|
|
IS 15301:2003 Reviewed In : 2023 Decision taken to Reaffirm and Archive |
Installation and Maintenance of Fire Fighting Pumps - Code of Practice
|
August, 2023
|
-
|
||
|
IS 15325:2020 |
Design and Installation of Fixed Automatic High and Medium Velocity Water Spray System — Code of Practice ( First Revision )
|
-
|
-
|
Indigenous
|
|
|
IS 15493:2021 |
Gaseous Fire Extinguishing Systems - General Requirements First Revision
|
-
|
Not Equivalent
|
||
|
IS 15496:2004 Reviewed In : 2020 |
Inspection and maintenance of gaseous fire extinguishing systems - Code of practice
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 15497:2004 Reviewed In : 2020 |
Gaseous fire extinguishing systems - IG 01 extinguishing systems
|
January, 2020
|
-
|
Not Equivalent
|
|
|
IS 15501:2004 Reviewed In : 2020 |
Gaseous fire extinguishing systems - IG 541 extinguishing systems
|
January, 2020
|
-
|
Not Equivalent
|
|
|
IS 15505:2004 Reviewed In : 2020 |
Gaseous fire extinguishing systems - HCFC blend a extinguishing systems
|
January, 2020
|
-
|
Not Equivalent
|
|
|
IS 15506:2004 Reviewed In : 2020 |
Gaseous fire extinguishing systems - IG 55 extinguishing systems
|
January, 2020
|
-
|
Not Equivalent
|
|
|
IS 15517:2004 Reviewed In : 2020 |
Gaseous fire extinguishing systems - HFC 227ea (Hepta Fluoro Propane) extinguishing systems
|
January, 2020
|
2
|
Not Equivalent
|
|
|
IS 15519:2020 |
Water Mist Fire Protection Systems - System Design, Installation and Commissioning - Code of Practice ( First Revision )
|
-
|
-
|
Indigenous
|
|
|
IS 15525:2004 Reviewed In : 2020 |
Gaseous fire extinguishing systems - IG 100 extinguishing systems
|
January, 2020
|
-
|
Not Equivalent
|
|
|
IS 15528:2004 Reviewed In : 2020 |
Gaseous fire extinguishing systems - Carbon dioxide total flooding and local application (Sub - Floor And In - Cabinet), high and low pressure (Refrigerated) systems
|
January, 2020
|
-
|
Not Equivalent
|
|
|
IS 15682:2006 Reviewed In : 2022 |
Fire fighting vehicles and equipment - Symbols for operator controls and other display
|
February, 2022
|
-
|
Not Equivalent
|
|
|
IS 15683:2018 Reviewed In : 2023 |
Portable Fire Extinguishers — Performance and Construction — Specification ( First Revision )
|
December, 2023
|
1
|
Modified/Technically Equivalent
|
|
|
IS 15811:2008 Reviewed In : 2023 |
Long - Range water - Cum - Foam monitor with self - Inducting, aspirating and non - Aspirating jetand spray/fog nozzle for fire fighting - Specification
|
August, 2023
|
-
|
Indigenous
|
|
|
IS 15835:2009 Reviewed In : 2020 |
Gaseous Fire Extinguishing Systems - HCFC-125 Extinguishing Systems
|
January, 2020
|
1
|
||
|
IS 15908:2021 |
Selection installation and maintenance of control and indicating equipments for fire detection and alarm system - Code of Practice First Revision
|
-
|
Indigenous
|
||
|
IS 16018:2012 Reviewed In : 2022 |
Wheeled fire extinguishers - Performance and construction - Specification
|
April, 2022
|
3
|
Not Equivalent
|
|
|
IS 16088:2012 Reviewed In : 2022 |
Chlorinated polyvinyl chloride (CPVC) pipes for automatic sprinkler fire extinguishing system - Specification
|
November, 2022
|
1
|
Indigenous
|
|
|
IS 16095:2013 Reviewed In : 2023 |
Hazmat vehicle - Specification
|
October, 2023
|
-
|
Indigenous
|
|
|
IS 16109:2013 Reviewed In : 2023 |
Turntable ladder - Specification
|
September, 2023
|
-
|
Indigenous
|
|
|
IS 16534:2017 Reviewed In : 2022 |
Chlorinated Polyvinyl Chloride (CPCV) Pipe Fittings for Automatic Sprinkler Fire Extinguishing System - Specification
|
October, 2022
|
1
|
Indigenous
|
|
|
IS 18808:2025 |
Protective Helmet for Users of Bicycles, Skateboards and Roller Skates - Specification
|
-
|
Indigenous
|
||
|
IS 1941 (Part 1):1976 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Functional requirements for electric motor sirens: Part 1 ac, 4 - Phase, 50 hz, 415 volts type (Second Revision)
|
September, 2022
|
-
|
Indigenous
|
|
|
IS 2097:2024 |
Low Expansion Foam Making Branch Pipe and Portable Foam Inductor - Specification (Third Revision)
|
-
|
Indigenous
|
||
|
IS 2189:2008 Reviewed In : 2023 |
Selection, installation and maintenance of automatic fire detection and alarm system code of practice (Fourth Revision)
|
August, 2023
|
-
|
Not Equivalent
|
|
|
IS 2190:2024 |
Selection, Installation and Maintenance of First-aid Fire Extinguishers - Portable and Mobile - Code of Practice (fifth revision)
|
-
|
Indigenous
|
||
|
IS 2546:1974 Reviewed In : 2020 |
Specification for galvanized mild steel fire bucket (First Revision)
|
December, 2020
|
2
|
Indigenous
|
|
|
IS 2696:1974 Reviewed In : 2022 Reaffirmed but not taken up for revision |
Functional requirements for 1 125-1/min light fire engine (First Revision)
|
September, 2022
|
2
|
Indigenous
|
|
|
IS 2745:1983 Reviewed In : 2020 |
Specification for non - Metal helmet for firemen and civil defence personnel (Second Revision)
|
December, 2020
|
3
|
Indigenous
|
|
|
IS 2871:2012 Reviewed In : 2022 |
Branch pipe, universal for fire fighting purpose - Specification (Second Revision)
|
June, 2022
|
-
|
Indigenous
|
|
|
IS 2925:1984 Reviewed In : 2020 |
Specification for industrial safety helmets (Second Revision)
|
December, 2020
|
4
|
Not Equivalent
|
|
|
IS 2925:1984 Reviewed In : 2015 |
Specification for Industrial Safety Helmets(Bi-Lingual)
|
December, 2015
|
4
|
||
|
IS 2930:1980 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Functional requirements for hose laying tender for fire brigade use (First Revision)
|
September, 2022
|
1
|
||
|
IS 3582:1984 Reviewed In : 2020 |
Basket Strainers For Fire Fighting Purposes (cylindrical Type) (First Revision)
|
December, 2020
|
-
|
||
|
IS 3744:1985 Reviewed In : 2020 |
Specification hose binding machine
|
December, 2020
|
-
|
||
|
IS 3844:1989 Reviewed In : 2020 |
Code of practice for installation and maintenance of internal fire hydrants and hose reels on premises (First Revision)
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 4151:2015 Reviewed In : 2020 |
Protective helmets for motorcycle riders - Specification (Fourth Revision)
|
December, 2020
|
2
|
Indigenous
|
|
|
IS 4308:2019 Reviewed In : 2024 |
Dry Chemical Powders for Fire Fighting - BC, ABC and D Types - Specification ( Third Revision )
|
January, 2024
|
1
|
Modified/Technically Equivalent
|
|
|
IS 4571:1977 Reviewed In : 2020 |
Specification for aluminium extension ladders for fire brigade use (First Revision)
|
December, 2020
|
5
|
Indigenous
|
|
|
IS 4643:1984 Reviewed In : 2020 |
Specification for suction wrenches for fire brigade use (First Revision)
|
December, 2020
|
-
|
||
|
IS 4862 (Part 1):1986 Reviewed In : 2020 |
Specification for portable fire extinguisher for aircraft: Part 1 halon 1211 type (First Revision)
|
December, 2020
|
3
|
Not Equivalent
|
|
|
IS 4947:2006 Reviewed In : 2022 |
GAS CARTRIDGES FOR USE IN FIRE EXTINGUISHERS - SPECIFICATION (Third Revision)
|
February, 2022
|
-
|
Indigenous
|
|
|
IS 4989:2018 Reviewed In : 2023 |
Foam concentrate for producing mechanical foam for fire fighting - Specification (Fourth Revision)
|
December, 2023
|
1
|
Indigenous
|
|
|
IS 4989 (Part 4):2003 Reviewed In : 2018 |
Multipurpose aqueous film forming foam liquid concentrate for extinguishing hydrocarbon and polar solvent fires - Specification
|
August, 2018
|
2
|
Indigenous
|
|
|
IS 5131:2002 Reviewed In : 2022 |
Dividing Breeching with Control for Fire Brigade Use -Specification (Second Revision)
|
September, 2022
|
-
|
||
|
IS 5290:2025 |
Landing Valves - Specification (Fourth Revision)
|
-
|
Indigenous
|
||
|
IS 5486:1985 Reviewed In : 2020 |
Specification for quick release knife (First Revision)
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 5505:1985 Reviewed In : 2020 |
Specification for multi - Edged rescue axe (Non - Wedging) (First Revision)
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 5612 (Part 1):1977 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Specification for hose - Clamps and hose - Bandages for fire brigade use: Part 1 hose - Clamps (First Revision)
|
September, 2022
|
1
|
Indigenous
|
|
|
IS 5612 (Part 2):1977 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Specification for hose - Clamps and hose - Bandages for fire brigade use: Part 2 hose - Bandages (First Revision)
|
September, 2022
|
-
|
Indigenous
|
|
|
IS 5714:1981 Reviewed In : 2022 |
Specification for hydrant stand - Pipe for fire fighting (First Revision)
|
September, 2022
|
1
|
Indigenous
|
|
|
IS 5888:1970 Reviewed In : 2020 |
Code of practice for design and construction of fire service drill - Tower
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 5896 (Part 1):1970 Reviewed In : 2020 |
Code of practice for selection, operation and maintenance of special fire fighting appliances: Part 1 combined foam and cop crash tender
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 5896 (Part 3):1975 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Code of practice for selection, operation and maintenance of fire fighting appliances: Part 3 Turntable ladders
|
September, 2022
|
-
|
||
|
IS 6026:1985 Reviewed In : 2020 |
Specification for hand - Operated sirens (First Revision)
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 6067:1983 Reviewed In : 2020 |
Functional Requirements for Water Tender Type `X' for Fire Brigade Use (First Revision)
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 6070:1983 Reviewed In : 2020 |
Code of practice for selection, operation and maintenance of trailer fire pumps, portable pumps, water tenders and motor fire engines (First Revision)
|
December, 2020
|
-
|
Indigenous
|
|
|
IS/ISO 6182-7:2004 ISO 6182-7 : 2004 Reviewed In : 2023 |
Fire protection - Automatic sprinkler systems: Part 7 requirements and test methods for early suppression fast response (Esfr) sprinklers
|
September, 2023
|
-
|
Identical under single numbering
|
|
|
IS/ISO 7240-2:2017 ISO 7240-2: 2017 |
Fire Detection and Alarm Systems Part 2: Fire Detection Control and Indicating Equipment first revision
|
-
|
Identical under single numbering
|
||
|
IS/ISO 7240-3:2020 ISO 7240-3: 2020 |
Fire Detection and Alarm Systems - Part 3: Audible Alarm Devices first revision
|
-
|
Identical under single numbering
|
||
|
IS/ISO 7240-4:2017 ISO 7240-4: 2017 |
Fire Detection and Alarm Systems - Part 4 Power Supply Equipment first revision
|
-
|
Identical under single numbering
|
||
|
IS/ISO 7240-5:2018 ISO 7240-5:L 2018 |
Fire Detection and Alarm Systems - Part 5 Point Type Heat Detectors second revision
|
-
|
Identical under single numbering
|
||
|
IS/ISO 7240-6:2011 ISO 7240-6 : 2011 |
Fire detection and alarm systems: Part 6 carbon monoxide fire detectors using electro - Chemical cells
|
-
|
Identical under dual numbering
|
||
|
IS/ISO 7240-7:2023 ISO 7240-7: 2023 |
Fire Detection and Alarm Systems - Part 7 Point-Type Smoke Detectors using Scattered Light Transmitted Light or Ionization first revision
|
-
|
Identical under single numbering
|
||
|
IS/ISO 7240-8:2014 ISO 7240-8 : 2014 |
Fire Detection and Alarm Systems Part 8 Point-Type Fire Detectors Using a Carbon Monoxide Sensor in Combination with a Heat Sensor
|
-
|
Identical under single numbering
|
||
|
IS/ISO 7240-10:2012 ISO 7240-10 : 2012 |
Fire Detection and Alarm Systems Part 10 Point-Type Flame Detectors
|
-
|
Identical under single numbering
|
||
|
IS/ISO 7240-1:2011 ISO 7240-11 : 2011 Reviewed In : 2023 |
Fire detection and alarm systems: Part 11 manual call points
|
September, 2023
|
-
|
Identical under single numbering
|
|
|
IS/ISO 7240-12:2022 ISO 7240-12: 2022 |
Fire Detection and Alarm Systems - Part 12 Line Type Smoke Detectors using a Transmitted Optical Beam first revision
|
-
|
Identical under single numbering
|
||
|
IS/ISO 7240-13:2020 ISO 7240:-13: 2020 |
Fire Detection and Alarm Systems Part 13 Compatibility Assessment of System Components first revision
|
-
|
Identical under single numbering
|
||
|
IS/ISO 7240-15:2014 ISO 7240-15: 2014 |
Fire Detection and Alarm Systems Part 15: Point-Type Fire Detectors Using Smoke and Heat Sensors first revision
|
-
|
Identical under single numbering
|
||
|
IS/ISO 7240-16:2007 ISO 7240-16 : 2007 |
Fire detection and alarm systems: Part 16 sound system control and indicating equipment
|
-
|
Identical under dual numbering
|
||
|
IS/ISO 7240-17:2020 ISO 7240-17: 2020 |
Fire Detection and Fire Alarm Systems - Part 17: Transmission Path Isolators first revision
|
-
|
Identical under single numbering
|
||
|
IS/ISO 7240-18:2017 ISO 7240-18 : 2017 |
Fire Detection and Alarm Systems Part 18 Input/Output Devices
|
-
|
Identical under dual numbering
|
||
|
IS/ISO 7240-20:2010 ISO 7240-20 : 2010 |
Fire detection and alarm systems: Part 20 aspirating smoke detectors
|
-
|
Identical under dual numbering
|
||
|
IS/ISO 7240-21:2005 ISO 7240-21 : 2005 |
Fire Detection and Alarm Systems Part 21 Routing Equipment
|
-
|
Identical under single numbering
|
||
|
IS/ISO 7240-22:2017 ISO 7240-22 : 2017 |
Fire Detection and Alarm Systems Part 22 Smoke-Detection Equipment for Ducts
|
-
|
Identical under dual numbering
|
||
|
IS/ISO 7240-23:2013 ISO 7240-23 : 2013 |
Fire Detection and Alarm Systems Part 23 Visual Alarm Devices
|
-
|
Identical under dual numbering
|
||
|
IS/ISO 7240-24:2016 ISO 7240-24 : 2016 |
Fire Detection and Alarm Systems Part 24 Fire Alarm Loudspeakers
|
-
|
Identical under single numbering
|
||
|
IS/ISO 7240-25:2010 ISO 7240-25 : 2010 |
Fire Detection and Alarm Systems Part 25 Components Using Radio Transmission Paths
|
-
|
Identical under single numbering
|
||
|
IS/ISO 7240-27:2018 ISO 7240-27 : 2018 |
Fire Detection and Alarm Systems Part 27 Point Type Fire Detectors Using a Smoke Sensor in Combination with a Carbon Monoxide Sensor and, Optionally, One or More Heat Sensors
|
-
|
Identical under dual numbering
|
||
|
IS/ISO 7240-29:2017 |
Fire Detection and Alarm Systems Part 29 Video Fire Detectors
|
-
|
Identical under single numbering
|
||
|
IS/ISO 7240-31:2022 ISO 7240-31: 2022 |
Fire Detection and Alarm Systems - Part 31 Resettable Line-Type Heat Detectors Adoption of IS 7240-31: 2022
|
-
|
Identical under single numbering
|
||
|
IS 7673:2004 Reviewed In : 2023 |
Fire Fighting Equipment - Glossary of Terms (First Revision)
|
August, 2023
|
-
|
Modified/Technically Equivalent
|
|
|
IS 7692:2024 |
Headform for Testing of Helmets - Specification (Second Revision)
|
-
|
Indigenous
|
||
|
IS 8090:1976 Reviewed In : 2020 |
Specification for couplings, branch pipe, nozzle used in hose reel tubing for fire fighting (First Revision)
|
December, 2020
|
1
|
Indigenous
|
|
|
IS 8096:1992 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Fire beaters - Specification (First Revision)
|
September, 2022
|
-
|
Indigenous
|
|
|
IS 8423:1994 Reviewed In : 2020 |
Specification for controlled percolating hose for fire fighting (First revision)
|
December, 2020
|
3
|
||
|
IS 8442:2024 |
Stand Post Type Water and Water-cum-Foam Monitor for Fire Fighting - Specification (Second Revision)
|
-
|
Indigenous
|
||
|
IS 884:2025 |
First-Aid Hose-Reel for Fire Fighting - Specification (Second Revision)
|
-
|
Indigenous
|
||
|
IS 901:1988 Reviewed In : 2022 |
Specification for couplings, double male and double female instantaneous pattern for fire fighting (Third Revision)
|
September, 2022
|
1
|
Indigenous
|
|
|
IS 902:1992 Reviewed In : 2022 |
Suction hose couplings for fire fighting purposes - Specification (Third Revision)
|
September, 2022
|
2
|
Indigenous
|
|
|
IS 903:2025 |
Fire Hose Delivery Couplings, Branch Pipe, Nozzles and Nozzle Spanner - Specification (Fifth Revision)
|
-
|
|||
|
IS 904:1983 Reviewed In : 2020 |
Specification for 2 - Way and 4 - Way suction collecting heads for fire fighting purposes (Second Revision)
|
December, 2020
|
1
|
Indigenous
|
|
|
IS 905:2025 |
Delivery Breechings for Fire Fighting - Dividing and Collecting - Instantaneous Pattern - Specification (third revision)
|
-
|
Indigenous
|
||
|
IS 906:2024 |
Portable and Fixed Type Revolving Branch for Fire Fighting - Specification (Fourth Revision)
|
-
|
Indigenous
|
||
|
IS 907:1984 Reviewed In : 2020 |
Specification for suction strainers, cylindrical type for fire fighting purposes (Second Revision)
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 908:1975 Reviewed In : 2020 |
Specification for fire hydrant, stand post type (Second Revision)
|
December, 2020
|
1
|
Indigenous
|
|
|
IS 909:1992 Reviewed In : 2022 |
Underground fire hydrant, sluice valve type - Specification (Third Revision)
|
September, 2022
|
-
|
Indigenous
|
|
|
IS 910:1980 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Specification for combined key for hydrant, hydrant cover and lower valve (Second Revision)
|
September, 2022
|
1
|
Indigenous
|
|
|
IS 926:1985 Reviewed In : 2020 |
Specification For Fireman's Axe (Second Revision)
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 927:1981 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Specification for fire hooks (Second Revision)
|
September, 2022
|
2
|
Indigenous
|
|
|
IS 928:1984 Reviewed In : 2020 |
Specification for fire bells (Second Revision)
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 937:1981 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Specification for Washers For Water Fittings For Fire Fighting Purposes (Second Revision)
|
September, 2022
|
2
|
||
|
IS 939:1977 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Specification for Snatch Block for Use with Fibre Rope for Fire Brigade Use (First Revision)
|
September, 2022
|
-
|
||
|
IS 941:1985 Reviewed In : 2020 |
Specification for blower and exhauster - For fire fighting (Second Revision)
|
December, 2020
|
2
|
Indigenous
|
|
|
IS 942:1982 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Functional requirements for 275 1/min portable pump set for fire fighting (Second Revision)
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 943:1979 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Functional Requirements for 680-1/Min Trailer Pump For Fire Brigade Use (Second Revision)
|
August, 2018
|
2
|
||
|
IS 944:1979 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Functional requirements of 1800-1/min trailer pump for fire brigade use (Second Revision)
|
August, 2022
|
1
|
Indigenous
|
|
|
IS 947:1985 Reviewed In : 2022 Reaffirmed but not taken up for revision |
Specification for washers for water fittings for fire fighting purposes (Second Reuision)
|
September, 2022
|
1
|
Indigenous
|
|
|
IS 948:1983 Reviewed In : 2020 |
Functional Requirements for Water Tender Type `A' for Fire Brigade Use (Second Revision)
|
December, 2020
|
1
|
Indigenous
|
|
|
IS 949:2012 Reviewed In : 2022 |
Specification for snatch block for use with fibre rope for fire brigade use (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 950:2012 Reviewed In : 2022 |
Functional requirements for water tender, type B for fire brigade use (Third Revision)
|
October, 2022
|
-
|
Indigenous
|
|
|
IS 951:2003 Reviewed In : 2023 |
Functional requirements for crash fire tender for air fields (Fourth Revision)
|
August, 2023
|
-
|
Indigenous
|
|
|
IS 952:2012 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Fog nozzle for fire brigade use - Specification (Second Revision)
|
June, 2022
|
-
|
Indigenous
|
|
|
IS 955:1980 Reviewed In : 2023 Decision taken to Reaffirm and Archive |
Functional requirements for dry powder tender for fire brigade use (First Revision)
|
August, 2023
|
1
|
Indigenous
|
|
|
IS 956:2004 Reviewed In : 2020 |
Functional requirements for rescue tender for air fields (Second Revision)
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 9562:1980 Reviewed In : 2022 |
Specification for non - Metal helmet for police force
|
September, 2022
|
5
|
Indigenous
|
|
|
IS 957:1967 Reviewed In : 2020 |
Specification for control van for fire brigade use
|
December, 2020
|
3
|
Indigenous
|
|
|
IS 9668:1990 Reviewed In : 2020 |
Provision and maintenance of water supplies for fire fighting - Code of practice (First Revision)
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 9695:1980 Reviewed In : 2020 |
Methods for sampling of helmets
|
December, 2020
|
-
|
Indigenous
|
|
|
IS 9972:2002 Reviewed In : 2017 |
Specification for automatic sprinkler heads for fire protection service (First Revision)
|
September, 2017
|
-
|
Indigenous
|
|
|
IS 9972:2023 |
Automatic Sprinkler Heads for Fire Protection Service - Specification (Second Revision)
|
-
|
Indigenous
|
||
|
IS 9973:1981 Reviewed In : 2022 |
Specification for visor for scooter helmets
|
September, 2022
|
1
|
||
|
IS 9995:1981 Reviewed In : 2022 |
Specification for visor for non-metal police and firemen's helmets
|
September, 2022
|
1
|
Indigenous
|
| No Records Found |
|
CED 22 (26448)
|
Medium and High Expansion Foam Concentrate for Fire Fighting - Specification |
|
|
CED 22 (27330)
|
Nitrogen Injection Fire Prevention and Extinguishing System NIFPES for Oil Filled Transformers and Reactors Guidelines |
| No Records Found |
|
CED 22 (25685)
Revision of: IS 950:2012 |
Water Tender for Fire Brigade Use - Functional Requirements Fourth Revision |
|
|
CED 22 (25719)
Revision of: IS 10460:1983 |
Foam Tender for Fire Brigade Use - Functional Requirements first revision |
|
|
CED 22 (28725)
Revision of: IS 2925:1984 |
Industrial Safety Helmet Specification Third Revision |
CED 22 (26193)
Revision of: IS 2189:2008 |
Selection Installation and Maintenance of Automatic Fire Detection and Alarm System - Code of Practice Fifth Revision |
|
CED 22 (25695)
|
Design Installation Testing and Maintenance of Condensed Aerosol Fire Extinguishing System - Code of Practice | |
|
CED 22 (26518)
|
Amendment No 1 to Gaseous Fire Extinguishing Systems - General Requirements First Revision |
|
|
IS 10204:2001 Reviewed In : 2010 |
Specification for portable fire extinguisher mechanical foam type |
|
|
IS 10474:1983 Reviewed In : 1995 |
150 litre capacity chemical fire engine foam type |
|
|
IS 10658:1999 Reviewed In : 2015 |
Specification for Higher Capacity Dry Powder Fire Extinguisher Trolley Mounted |
|
|
IS 11070:1984 Reviewed In : 2005 |
bromochlorodifluoromethane halon-1211 for fire fighting |
|
|
IS 11360:1985 Reviewed In : 2020 |
Specification for smoke detectors for use in automatic electrical fire alarm system |
|
|
IS 13385:1992 Reviewed In : 2017 |
Specification for Fire Extinguisher 50 Litre Capacity Wheel Mounted Water Type gas Cartridge |
|
|
IS 13386:1992 Reviewed In : 2017 |
Specification for Fire Extinguisher 50 Litre Capacity Mechanical Foam Type |
|
|
IS 13849:1993 Reviewed In : 2008 |
Specification for portable fire extinguisher dry powder type constant pressure |
|
|
IS 14609:1999 Reviewed In : 2015 |
Dry chemical powder for fighting a b c class fires specification |
|
|
IS 15397:2003 Reviewed In : 2008 |
Portable Fire Extinguisher Mechanical Foam Type Stored Pressure -Specification |
|
|
IS 15683:2006 Reviewed In : 2017 |
Portable Fire Extinguishers - Performance and Construction - Specification First Revision |
|
|
IS 15821:2008 Reviewed In : 2018 |
Gaseous fire extinguishing systems - Physical properties and system design - CF3I extinguishant |
|
|
IS 1910:1961 |
Self contained breathing apparatus for the brigade use Incorporated in IS 10245 Part 2 |
|
|
IS 1924:1973 |
Portable fire extinguisher water type pocket pump |
|
|
IS 1933:1961 |
Portable chemical fire extinguisher chloro bromomethane type |
|
|
IS 2171:1999 Reviewed In : 2010 |
Specification for portable fire extinguishers dry powder cartridge type |
|
|
IS 2175:1988 Reviewed In : 2020 |
Specificationfor heat sensitivefiredetectorsfor usein automaticfirealarm system Second Revision |
|
|
IS 2298:1977 Reviewed In : 2008 |
Single-barrel Stirrup Pump For Fire Fighting Purposes |
|
|
IS 2299:1968 |
Steel Helmets For Civil Defence |
|
|
IS 2300:1968 |
Non Metal Helmets For Civil Defence |
|
|
IS 2878:2004 Reviewed In : 2015 |
Fire Extinguisher Carbon Dioxide Type Portable and Trolley Mounted -Specification |
|
|
IS 4151:1993 Reviewed In : 2013 |
Specification for protective helmets for scooter and motorcycle riders |
|
|
IS 4308:2003 Reviewed In : 2018 |
Dry Chemical Powders for Fire Fighting - BC ABC and D Types - Specification Third Revision |
|
|
IS 4861:1984 Reviewed In : 2015 |
Specification for Dry Powder for Fighting Fires in Burning Metals |
|
|
IS 4927:1992 Reviewed In : 2022 |
Unlined flax canvas hose for fire fighting - Specification First Revision |
|
|
IS 4928:1986 Reviewed In : 2020 |
Specification for delivery valve for centrifugal fire pump outlets First Revision |
|
|
IS 4989:2006 Reviewed In : 2017 |
Foam Concentrate for producing mechanical foam for fire fighting - Specification Amalgamating IS 4989 Part 1 1985 Part 2 1984 Part 3 1987 |
|
|
IS 5490 (Part 1):1977 Reviewed In : 1997 |
Refills For Portable Fire Extinguishers And Chemical Fire Engines Part 1 For Soda Acid Portable Fire Extinguishers |
|
|
IS 5490 (Part 2):1977 Reviewed In : 1997 |
Refills for Portable Fire Extinguishers and Chemical Fire Engines - Part II For Foam Type Portable Fire Extinguisher |
|
|
IS 5490 (Part 3):1979 Reviewed In : 1997 |
Refills for Portable Fire Extinguishers and Chemical Fire Engines - Part III For Soda Acid Chemical Fire Engines 50 Litre Capacity |
|
|
IS 5490 (Part 4):1979 Reviewed In : 1997 |
Refills for Portable Fire Extinguishers and Chemical Fire Engines - Part IV For Foam Chemical Fire Engines 50 Litre Capacity |
|
|
IS 5506:1979 Reviewed In : 1992 |
50-l Capacity Chemical Fire Engine Soda Acid Type |
|
|
IS 5507:1979 Reviewed In : 1992 |
Capacity Chemical Fire Engine Foam Type |
|
|
IS 5896 (Part 2):1975 Reviewed In : 1992 |
Code of practice for selection operation and maintenance of special fire fighting appliances Part 2 Escapes |
|
|
IS 6234:2003 Reviewed In : 2008 |
Portable Fire Extinguishers Water Type Stored Pressure -Specification |
|
|
IS 6382:1984 Reviewed In : 2000 |
Code of Practice for Design and Installation of Fixed Carbon Dioxide Fire Extinguishing System |
|
|
IS 7612:1974 |
Functional requirements for flame resistant and heat resistant suits |
|
|
IS 8149:1994 Reviewed In : 2015 |
Functional requirements for twin co2 fire extinguishers trolley mounted |
|
|
IS 929:1959 |
Hok Ladder For Fire Fighting Purposes |
|
|
IS 930:1977 Reviewed In : 1992 |
Wooden extension ladders for fire brigate use |
|
|
IS 931:1973 Reviewed In : 1992 |
Weeled Fire Escape |
|
|
IS 932:1960 |
30-40 M or 100-110 ft Mechanically operated turn-table ladder for fire bridgade use |
|
|
IS 933:1989 Reviewed In : 1995 |
Portable chemical foam fire extinguisher |
|
|
IS 934:1989 Reviewed In : 1995 |
Portable fire extinguisher water type soda acid |
|
|
IS 935:1967 |
Portable chemical fire extinguisher carbon tetrachloride type |
|
|
IS 936:1966 |
Underground fire hydrant double valve type revised |
|
|
IS 938:1973 |
Specification for Functional requirements for 1350-1 min small fire engine |
|
|
IS 940:2003 Reviewed In : 2008 |
Specification for Portable Fire Extinguisher Water Type Gas Cartridge - |
|
|
IS 945:1966 |
1800-1 min Motor Fire Engine |
|
|
IS 946:1977 Reviewed In : 1992 |
Functional requirements for motor fire engine |
|
|
IS 953:1960 |
Small foam crash tender |
|
|
IS 954:1989 Reviewed In : 1995 |
Functional requirements for carbon dioxide tender for fire brigade use |
|
IS 10460:1983 Reviewed In : 2020 |
FUNCTIONAL REQUIREMENTS FOR SMALL FOAM TENDER FOR FIRE BRIGADE USE |
|
|
IS 10993:1984 Reviewed In : 2020 |
Functional requirements for 2000 kg dry powder tender for fire brigade use |
|
|
IS 11101:1984 Reviewed In : 2022 |
Specification for extended branch pipe for fire brigade use |
|
|
IS 11108:1984 Reviewed In : 2020 |
Specification for portable fire extinguishers - Halon 1211 type |
|
|
IS 11833:1986 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Specification For Dry Powder Fire Extinguisher For Metal Fires |
|
|
IS 12717:1989 Reviewed In : 2020 |
Fire fighting equipment - High capacity portable pump set 1100 - 1600 L min - Functional requirements |
|
|
IS 12796:1989 Reviewed In : 2020 |
Fire rake - Specification |
|
|
IS 12805:1989 Reviewed In : 2020 |
Tool mcleod for fighting forest fires - Specification |
|
|
IS 12853:1989 Reviewed In : 2020 |
Specification pulaski tool for forest fire |
|
|
IS 12859:1989 Reviewed In : 2020 |
Fire fighting - Brush hook for forest fires - Specification |
|
|
IS 12861:1989 Reviewed In : 2020 |
Fire fighting - Double bit axe for forest fires - Specification |
|
|
IS 12862:1989 Reviewed In : 2020 |
Fire fighting - Shovel for forest fires - Specification |
|
|
IS 14851:2000 Reviewed In : 2020 |
Maintenance of fire hose - Code of practice |
|
|
IS 14933:2001 Reviewed In : 2020 |
High Pressure Fire Fighting Hose -Specification |
|
|
IS 14951:2001 Reviewed In : 2020 |
Fire extinguisher - 135 litres capacity mechanical foam type - Specification |
|
|
IS 15051:2001 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
High pressure fire hose delivery couplings - Specification |
|
|
IS 15220:2002 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Halogenated hydrocarbons - Halon 1211 and halon 1401 - Fire extinguishing media - Specification |
|
|
IS 15222:2002 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Carbon dioxide as fire extinguishing media for fire protection - Specification |
|
|
IS 15811:2008 Reviewed In : 2023 |
Long - Range water - Cum - Foam monitor with self - Inducting aspirating and non - Aspirating jetand spray fog nozzle for fire fighting - Specification |
|
|
IS 16018:2012 Reviewed In : 2022 |
Wheeled fire extinguishers - Performance and construction - Specification |
|
|
IS 16088:2012 Reviewed In : 2022 |
Chlorinated polyvinyl chloride CPVC pipes for automatic sprinkler fire extinguishing system - Specification |
|
|
IS 16095:2013 Reviewed In : 2023 |
Hazmat vehicle - Specification |
|
|
IS 16109:2013 Reviewed In : 2023 |
Turntable ladder - Specification |
|
|
IS 16534:2017 Reviewed In : 2022 |
Chlorinated Polyvinyl Chloride CPCV Pipe Fittings for Automatic Sprinkler Fire Extinguishing System - Specification |
|
|
IS 18808:2025 |
Protective Helmet for Users of Bicycles Skateboards and Roller Skates - Specification |
|
|
IS 2097:2024 |
Low Expansion Foam Making Branch Pipe and Portable Foam Inductor - Specification Third Revision |
|
|
IS 2546:1974 Reviewed In : 2020 |
Specification for galvanized mild steel fire bucket First Revision |
|
|
IS 2745:1983 Reviewed In : 2020 |
Specification for non - Metal helmet for firemen and civil defence personnel Second Revision |
|
|
IS 2871:2012 Reviewed In : 2022 |
Branch pipe universal for fire fighting purpose - Specification Second Revision |
|
|
IS 2925:1984 Reviewed In : 2020 |
Specification for industrial safety helmets Second Revision |
|
|
IS 2925:1984 Reviewed In : 2015 |
Specification for Industrial Safety Helmets Bi-Lingual |
|
|
IS 3582:1984 Reviewed In : 2020 |
Basket Strainers For Fire Fighting Purposes cylindrical Type First Revision |
|
|
IS 3744:1985 Reviewed In : 2020 |
Specification hose binding machine |
|
|
IS 4571:1977 Reviewed In : 2020 |
Specification for aluminium extension ladders for fire brigade use First Revision |
|
|
IS 4643:1984 Reviewed In : 2020 |
Specification for suction wrenches for fire brigade use First Revision |
|
|
IS 4862 (Part 1):1986 Reviewed In : 2020 |
Specification for portable fire extinguisher for aircraft Part 1 halon 1211 type First Revision |
|
|
IS 4947:2006 Reviewed In : 2022 |
GAS CARTRIDGES FOR USE IN FIRE EXTINGUISHERS - SPECIFICATION Third Revision |
|
|
IS 4989 (Part 4):2003 Reviewed In : 2018 |
Multipurpose aqueous film forming foam liquid concentrate for extinguishing hydrocarbon and polar solvent fires - Specification |
|
|
IS 5131:2002 Reviewed In : 2022 |
Dividing Breeching with Control for Fire Brigade Use -Specification Second Revision |
|
|
IS 5290:2025 |
Landing Valves - Specification Fourth Revision |
|
|
IS 5486:1985 Reviewed In : 2020 |
Specification for quick release knife First Revision |
|
|
IS 5505:1985 Reviewed In : 2020 |
Specification for multi - Edged rescue axe Non - Wedging First Revision |
|
|
IS 5612 (Part 1):1977 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Specification for hose - Clamps and hose - Bandages for fire brigade use Part 1 hose - Clamps First Revision |
|
|
IS 5612 (Part 2):1977 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Specification for hose - Clamps and hose - Bandages for fire brigade use Part 2 hose - Bandages First Revision |
|
|
IS 5714:1981 Reviewed In : 2022 |
Specification for hydrant stand - Pipe for fire fighting First Revision |
|
|
IS 6026:1985 Reviewed In : 2020 |
Specification for hand - Operated sirens First Revision |
|
|
IS/ISO 6182-7:2004 ISO 6182-7 : 2004 Reviewed In : 2023 |
Fire protection - Automatic sprinkler systems Part 7 requirements and test methods for early suppression fast response Esfr sprinklers |
|
|
IS/ISO 7240-2:2017 ISO 7240-2: 2017 |
Fire Detection and Alarm Systems Part 2 Fire Detection Control and Indicating Equipment first revision |
|
|
IS/ISO 7240-3:2020 ISO 7240-3: 2020 |
Fire Detection and Alarm Systems - Part 3 Audible Alarm Devices first revision |
|
|
IS/ISO 7240-4:2017 ISO 7240-4: 2017 |
Fire Detection and Alarm Systems - Part 4 Power Supply Equipment first revision |
|
|
IS/ISO 7240-5:2018 ISO 7240-5:L 2018 |
Fire Detection and Alarm Systems - Part 5 Point Type Heat Detectors second revision |
|
|
IS/ISO 7240-6:2011 ISO 7240-6 : 2011 |
Fire detection and alarm systems Part 6 carbon monoxide fire detectors using electro - Chemical cells |
|
|
IS/ISO 7240-7:2023 ISO 7240-7: 2023 |
Fire Detection and Alarm Systems - Part 7 Point-Type Smoke Detectors using Scattered Light Transmitted Light or Ionization first revision |
|
|
IS/ISO 7240-8:2014 ISO 7240-8 : 2014 |
Fire Detection and Alarm Systems Part 8 Point-Type Fire Detectors Using a Carbon Monoxide Sensor in Combination with a Heat Sensor |
|
|
IS/ISO 7240-10:2012 ISO 7240-10 : 2012 |
Fire Detection and Alarm Systems Part 10 Point-Type Flame Detectors |
|
|
IS/ISO 7240-1:2011 ISO 7240-11 : 2011 Reviewed In : 2023 |
Fire detection and alarm systems Part 11 manual call points |
|
|
IS/ISO 7240-12:2022 ISO 7240-12: 2022 |
Fire Detection and Alarm Systems - Part 12 Line Type Smoke Detectors using a Transmitted Optical Beam first revision |
|
|
IS/ISO 7240-15:2014 ISO 7240-15: 2014 |
Fire Detection and Alarm Systems Part 15 Point-Type Fire Detectors Using Smoke and Heat Sensors first revision |
|
|
IS/ISO 7240-16:2007 ISO 7240-16 : 2007 |
Fire detection and alarm systems Part 16 sound system control and indicating equipment |
|
|
IS/ISO 7240-17:2020 ISO 7240-17: 2020 |
Fire Detection and Fire Alarm Systems - Part 17 Transmission Path Isolators first revision |
|
|
IS/ISO 7240-18:2017 ISO 7240-18 : 2017 |
Fire Detection and Alarm Systems Part 18 Input Output Devices |
|
|
IS/ISO 7240-20:2010 ISO 7240-20 : 2010 |
Fire detection and alarm systems Part 20 aspirating smoke detectors |
|
|
IS/ISO 7240-21:2005 ISO 7240-21 : 2005 |
Fire Detection and Alarm Systems Part 21 Routing Equipment |
|
|
IS/ISO 7240-22:2017 ISO 7240-22 : 2017 |
Fire Detection and Alarm Systems Part 22 Smoke-Detection Equipment for Ducts |
|
|
IS/ISO 7240-23:2013 ISO 7240-23 : 2013 |
Fire Detection and Alarm Systems Part 23 Visual Alarm Devices |
|
|
IS/ISO 7240-24:2016 ISO 7240-24 : 2016 |
Fire Detection and Alarm Systems Part 24 Fire Alarm Loudspeakers |
|
|
IS/ISO 7240-25:2010 ISO 7240-25 : 2010 |
Fire Detection and Alarm Systems Part 25 Components Using Radio Transmission Paths |
|
|
IS/ISO 7240-27:2018 ISO 7240-27 : 2018 |
Fire Detection and Alarm Systems Part 27 Point Type Fire Detectors Using a Smoke Sensor in Combination with a Carbon Monoxide Sensor and Optionally One or More Heat Sensors |
|
|
IS/ISO 7240-29:2017 |
Fire Detection and Alarm Systems Part 29 Video Fire Detectors |
|
|
IS/ISO 7240-31:2022 ISO 7240-31: 2022 |
Fire Detection and Alarm Systems - Part 31 Resettable Line-Type Heat Detectors Adoption of IS 7240-31 2022 |
|
|
IS 7692:2024 |
Headform for Testing of Helmets - Specification Second Revision |
|
|
IS 8090:1976 Reviewed In : 2020 |
Specification for couplings branch pipe nozzle used in hose reel tubing for fire fighting First Revision |
|
|
IS 8096:1992 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Fire beaters - Specification First Revision |
|
|
IS 8423:1994 Reviewed In : 2020 |
Specification for controlled percolating hose for fire fighting First revision |
|
|
IS 8442:2024 |
Stand Post Type Water and Water-cum-Foam Monitor for Fire Fighting - Specification Second Revision |
|
|
IS 884:2025 |
First-Aid Hose-Reel for Fire Fighting - Specification Second Revision |
|
|
IS 901:1988 Reviewed In : 2022 |
Specification for couplings double male and double female instantaneous pattern for fire fighting Third Revision |
|
|
IS 902:1992 Reviewed In : 2022 |
Suction hose couplings for fire fighting purposes - Specification Third Revision |
|
|
IS 903:2025 |
Fire Hose Delivery Couplings Branch Pipe Nozzles and Nozzle Spanner - Specification Fifth Revision |
|
|
IS 904:1983 Reviewed In : 2020 |
Specification for 2 - Way and 4 - Way suction collecting heads for fire fighting purposes Second Revision |
|
|
IS 905:2025 |
Delivery Breechings for Fire Fighting - Dividing and Collecting - Instantaneous Pattern - Specification third revision |
|
|
IS 906:2024 |
Portable and Fixed Type Revolving Branch for Fire Fighting - Specification Fourth Revision |
|
|
IS 907:1984 Reviewed In : 2020 |
Specification for suction strainers cylindrical type for fire fighting purposes Second Revision |
|
|
IS 908:1975 Reviewed In : 2020 |
Specification for fire hydrant stand post type Second Revision |
|
|
IS 909:1992 Reviewed In : 2022 |
Underground fire hydrant sluice valve type - Specification Third Revision |
|
|
IS 910:1980 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Specification for combined key for hydrant hydrant cover and lower valve Second Revision |
|
|
IS 926:1985 Reviewed In : 2020 |
Specification For Fireman 39 s Axe Second Revision |
|
|
IS 927:1981 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Specification for fire hooks Second Revision |
|
|
IS 928:1984 Reviewed In : 2020 |
Specification for fire bells Second Revision |
|
|
IS 937:1981 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Specification for Washers For Water Fittings For Fire Fighting Purposes Second Revision |
|
|
IS 939:1977 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Specification for Snatch Block for Use with Fibre Rope for Fire Brigade Use First Revision |
|
|
IS 941:1985 Reviewed In : 2020 |
Specification for blower and exhauster - For fire fighting Second Revision |
|
|
IS 952:2012 Reviewed In : 2022 Decision taken to Reaffirm and Archive |
Fog nozzle for fire brigade use - Specification Second Revision |
|
|
IS 9562:1980 Reviewed In : 2022 |
Specification for non - Metal helmet for police force |
|
|
IS 957:1967 Reviewed In : 2020 |
Specification for control van for fire brigade use |
|
|
IS 9972:2023 |
Automatic Sprinkler Heads for Fire Protection Service - Specification Second Revision |
|
|
IS 9973:1981 Reviewed In : 2022 |
Specification for visor for scooter helmets |
|
|
IS 9995:1981 Reviewed In : 2022 |
Specification for visor for non-metal police and firemen s helmets |