BUREAU OF INDIAN STANDARDS
Programme of Work
ETD33 : Winding Wire
- Scope : To prepare standards for wires for electrical winding irrrespective of conductor material, shape or type of covering taking into account the needs in the fields of electrotechnology
-
Liaison :IEC TC 55 - Winding wires - Participating (P)
|
IS 11174:1984 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for aromatic polyimide paper covered rectangular and square copper wires with temperature index 200
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 13730 (Part 34):2000 IEC 60317-34 |
Specifications for particular types of winding wires: Part 34 polyester enamelled round copper wire, class 130 L (First Revision)
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 6):1994 Reaffirmed but not taken up for revision |
Specification for particular types of winding wires: Part 6 oleo - Resinous enamelled round aluminium wire, class 105
|
March, 2021
|
-
|
Modified/Technically Equivalent
|
|
|
IS 13730 (Part 0/Sec 1):2018 EC 60317-0-1 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 0 general requirements: Sec 1 enamelled round copper wire (Second Revision)
|
September, 2024
|
1
|
Identical under dual numbering
|
|
|
IS 13730 (Part 0/Sec 2):2024 IEC 60317-0-2:2020 |
Particular Types of Winding Wires — Specifications Part 0 General Requirements Section 2 Enamelled Rectangular Copper Wire (Third Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 13730 (Part 0/Sec 3):2012 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 0 general requirements: Sec 3 enamelled round aluminium wire (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 0/Sec 4):2024 IEC 60317-0-4:2020 |
Specification for particular types of winding wires Part 0 General requirements Sec 4 glass - Fibre wound resin or varnish impregnated bare or enamelled rectangular copper wire (Third Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 13730 (Part 0/Sec 5):2012 EC 60317-0-5 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 0 general requirements: Sec 5 glass - Fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 0/Sec 6):2024 IEC 60317-0-6:2020 |
Specification for Particular Types of Winding Wires Part 0 General Requirements Section 6 Glass-Fibre Wound Resin or Varnish Impregnated, Bare or Enamelled Round Copper Wire ( First Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 13730 (Part 1):1993 Reviewed In : 2024 |
Particular types of winding wires: Part 1 Polyvinyl acetal enamelled round copper wire, class 105 (superseeding by IS 4800(Part 4):1968
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 1):2025 IEC 60317-1:2010+AMD1:2024 CSV |
Specification for Particular Types of Winding Wires Part 1 Polyvinyl Acetal Enamelled Round Copper Wire, Class 105 ( Second Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 13730 (Part 2):2024 IEC 60317-2:2019+AMD1:2024 CSV |
Specifications for particular types of winding wires Part 2 Solderable polyurethane enamelled round copper wire class 130 with a bonding layer
|
-
|
Identical under dual numbering
|
||
|
IS 13730 (Part 3):2012 IEC 60317-3 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 3 polyester enamelled round copper wire, class 155 (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 4):2018 IEC 60317-4 : 2015 Reviewed In : 2024 |
Specification for particular types of winding wires: Part 4 solderable polyurethane enamelled round copper wire, class 130, (Second Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 5):2018 Reviewed In : 2024 |
Specification for Particular Types of Winding Wires Part 5 Polyester Enamelled Round Aluminium Wire, Class 155
|
September, 2024
|
-
|
Modified/Technically Equivalent
|
|
|
IS 13730 (Part 8):2014 IEC 60317-8 : 2010 Reviewed In : 2024 |
Specification for particular types of winding wires: Part 8 polyesterimide enamelled round copper wire, class 180 (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 9):1994 Reviewed In : 2024 Reaffirmed but not taken up for revision |
Specification for particular types of winding wires: Part 9 polyester enamelled round aluminium wire, class 138
|
August, 2024
|
-
|
Modified/Technically Equivalent
|
|
|
IS 13730 (Part 12):2024 IEC 60317-12:2020 |
Particular types of winding wires - Specipication Part 12 Polyvinyl acetal enamelled round copper wire class 120 (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 13730 (Part 13):2014 IEC 60317-13 : 2010 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 13 polyester or polyesterimide overcoated with polyamide - Imide enamelled round copper wire, class 200 (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 15):1994 IEC 60317-15 Reviewed In : 2021 Reaffirmed but not taken up for revision |
Particular types of winding wires: Part 15 polyesterimide enammelled round aluminium wire, class 180
|
March, 2021
|
-
|
Modified/Technically Equivalent
|
|
|
IS 13730 (Part 16):1996 IEC 60317-16 Reviewed In : 2024 Reaffirmed but not taken up for revision |
Specifications for particular types of winding wires: Part 16 polyester enamelled rectangular copper wire class 155
|
September, 2024
|
1
|
Identical under dual numbering
|
|
|
IS 13730 (Part 17):2024 IEC 60317-17:2020 |
Specification for particular types of winding wires Part 17 Polyvinyl acetal enamelled rectangular copper wire class 105 (SECOND REVISION)
|
-
|
Identical under dual numbering
|
||
|
IS 13730 (Part 20):2018 IEC 60317-20 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 20 solderable polyurethane enamelled round copper wire, class 155 (Second Revision)
|
September, 2024
|
1
|
Identical under dual numbering
|
|
|
IS 13730 (Part 21):2017 IEC 60317-21 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 21 solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155
|
September, 2024
|
1
|
Identical under dual numbering
|
|
|
IS 13730 (Part 23):2017 IEC 60317-23 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 23 solderable polyesterimide enamelled round copper wire, class 180
|
September, 2024
|
1
|
Identical under dual numbering
|
|
|
IS 13730 (Part 25):2024 IEC 60317-25:2020 |
Particular Types of Winding Wires - Specification Part 25 Polyester or Polyesterimide Overcoated with Polyamide-Imide Enamelled Round Aluminium Wire, Class 200 ( First Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 13730 (Part 26):1996 IEC 60317-26 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specifications for particular types of winding wires: Part 26 polyamide - Imide enamelled round copper wire, class 200
|
June, 2018
|
1
|
Identical under dual numbering
|
|
|
IS 13730 (Part 27):2018 IEC 60317-27 : 2013 Reviewed In : 2024 |
Specifications for Particular Types of Winding Wires Part 27 Paper Tape Covered Rectangular Copper Wire ( First Revision )
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 27/Sec 1):2025 IEC 60317-27-1:2020+AMD1:2024 CSV |
Specifications for particular types of winding wires Part 27 Paper tape covered Section 1 Round copper wire
|
-
|
Identical under dual numbering
|
||
|
IS 13730 (Part 27/Sec 2):2025 IEC 60317-27-2:2020+AMD1:2024 CSV |
Particular Types of Winding Wires � Specification Part 27 Paper Tape Covered Section 2 Round Aluminium Wire
|
-
|
Identical under dual numbering
|
||
|
IS 13730 (Part 27/Sec 3):2025 IEC 60317-27-3:2019+AMD1:2024 CSV |
Specifications for particular types of winding wires Part 27 Paper tape covered Section 3 Rectangular copper wire
|
-
|
Identical under dual numbering
|
||
|
IS 13730 (Part 27/Sec 4):2025 IEC 60317-27-4:2020+AMD1:2024 CSV |
Specifications for particular types of winding wires Part 27 Paper tape covered Section 4 Rectangular aluminium wire
|
-
|
Identical under dual numbering
|
||
|
IS 13730 (Part 28):2018 IEC 60317-28 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 28 polyesterimide enamelled rectangular copper wire, class 180 (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 29):1996 IEC 60317-29 Reviewed In : 2024 Reaffirmed but not taken up for revision |
Specifications for particular types of winding wires: Part 29 polyester or polyesterimide overcoated with polyamide - Imide enamelled rectangular copper wire, class 200
|
September, 2024
|
1
|
Identical under dual numbering
|
|
|
IS 13730 (Part 31):2018 IEC 60317-31 : 2015 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 31 glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 32):2018 IEC 60317-32 : 2015 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 32 glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155 (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 33):2018 IEC 60317-33 : 2015 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 33 glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 35):2017 IEC 60317-35 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 35 solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
|
January, 2024
|
1
|
Identical under dual numbering
|
|
|
IS 13730 (Part 36):2017 IEC 60317-36 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 36 solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer
|
September, 2024
|
1
|
Identical under dual numbering
|
|
|
IS 13730 (Part 37):2017 IEC 60317-37 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 37 polyesterimide enamelled round copper wire, class 180, with a bonding layer
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 38):2018 IEC 60317-38 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 38 polyester or polyesterimide overcoated with polyamide - Imide, enamelled round copper wire, class 200, with a bonding layer
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 39):2018 IEC 60317-39 : 2015 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 39 glass - Fibre braided resin or varnish - Impregnated, bare or enamelled rectangular copper wire, temperature index 180 (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 43):2013 IEC 60317-43 Reviewed In : 2024 |
Specification for particular types of winding wires: Part 43 aromatic polyimide tape wrapped round copper wire, class 240 (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 44):2013 IEC 60317-44 Reviewed In : 2024 |
Specification for particular types of winding wires: Part 44 aromatic polyimide tape wrapped rectangular copper wire, class 240 (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 45):1999 IEC 60317-45 Reviewed In : 2024 Reaffirmed but not taken up for revision |
Specifications for particular types of winding wires: Part 45 polyester enamelled round copper wire, class 130
|
June, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 46):2017 IEC 60317-46 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 46 aromatic polyimide enamelled round copper wire, class 240
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 47):2017 IEC 60317-47 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 47 aromatic polyimide enamelled rectangular copper wire, class 240
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 48):2018 IEC 60217-48 : 2012 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 48 glass - Fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 49):2018 IEC 60317-49 : 2012 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 49 glass - Fibre wound, high temperature resin or varnish - Impregnated, bare or enamelled round copper wire, class 180 (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 50):2018 IEC 60317-50 : 2012 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 50 glass - Fibre wound, silicone resin or varnish impregnated, bare or enamelled round copper wire, class 200 (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 53):2018 IEC60317-53 : 2014 Reviewed In : 2024 |
Specifications for particular types of winding wires: Part 53 aromatic polyimide (Aramid) tape wrapped rectangular copper wire, temperature index 220 (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13730 (Part 57):2025 IEC 60317-57 |
Specifications for particular types of winding wires - Part 57: Polyamide-imide enameled round copper wire class 220
|
-
|
Identical under dual numbering
|
||
|
IS 13778 (Part 1):2024 IEC 60851-1:2021 |
Winding wires - Methods of Test Part 1 General (Second Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 13778 (Part 2):2013 IEC 60851-2 : 2009 Reviewed In : 2024 |
Winding wires - Test methods: Part 2 determination of dimensions (First Revision)
|
September, 2024
|
1
|
Identical under dual numbering
|
|
|
IS 13778 (Part 3):2024 IEC 60851-3:2023 |
Winding Wires - Methods of Test Part 3 Mechanical Properties ( Second Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 13778 (Part 4):2018 IEC 60851-4 : 2016 Reviewed In : 2024 |
Winding wires - Test methods: Part 4 chemical properties (Second Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13778 (Part 5):2012 IEC 60851-5 : 2008 Reviewed In : 2024 |
Winding wires - Test methods: Part 5 electrical properties (First Revision)
|
September, 2024
|
1
|
Identical under dual numbering
|
|
|
IS 13778 (Part 6):2018 IEC60851-6 : 2012 Reviewed In : 2024 |
Winding wires - Test methods: Part 6 thermal properties (Second Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 14841 (Part 2/Sec 1):2000 IEC 60264-2-1 |
Packaging of winding wires: Part 2 cylindrical barrelled delivery spools: Sec 1 basic dimensions
|
March, 2021
|
1
|
Identical under dual numbering
|
|
|
IS 14841 (Part 2/Sec 2):2000 IEC 60264-2-2 |
Packaging of winding wires: Part 2 cylindrical barrelled delivery spools: Sec 2 specification for returnable spools made fromThermoplastic materials
|
March, 2021
|
1
|
Identical under dual numbering
|
|
|
IS 14841 (Part 3/Sec 1):2000 IEC 60264-3-1 |
Packag - Ing of winding wires: Part 3 taper barrelled delivery spools: Sec 1 basic dimensions
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 14841 (Part 3/Sec 2):2000 IEC 60264-3-2 |
Packaging of winding wires: Part 3 taper barrelled delivery spools: Sec 2 specification for returnable spools made fromThermoplastic materials
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 14841 (Part 3/Sec 3):2000 |
Packaging of winding wires: Part 3 taper barrelled dellVery spools: Sec 3 specification for non - Returnable spools made from thermoplastic material
|
March, 2021
|
1
|
Identical under dual numbering
|
|
|
IS 14841 (Part 3/Sec 4):2000 Reviewed In : 2024 |
Packaging of winding wires: Part 3 taper barrelled delivery spools: Sec 4 basic dimensions of containers for taper barrelled delivery spools
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 14841 (Part 4/Sec 1):2013 Reviewed In : 2024 |
Packaging of winding wires: Part 4 methods of test: Sec 1 delivery spools made from thermoplastic materials (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 19059:2024 |
Continuously Transposed Conductor (CTC) Copper Winding Wires
|
-
|
Indigenous
|
||
|
IS 2069:2025 |
Drums for covered winding wires and strips for electrical purposes - Specification (Third Revision)
|
-
|
Indigenous
|
||
|
IS 5825:2024 IEC 60172:2020 |
Test Procedure for the Determination of the Temperature Index of Enamelled and Tape Wrapped Winding Wires (Third Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 6162 (Part 1):1971 Reviewed In : 2018 |
Specification for paper - Covered aluminium conductors: Part 1 round conductors
|
June, 2018
|
4
|
Modified/Technically Equivalent
|
|
|
IS 6162 (Part 2):1971 Reviewed In : 2018 |
Specification for paper covered aluminium conductors: Part 2 rectangular conductors
|
June, 2018
|
5
|
Modified/Technically Equivalent
|
|
|
IS 7391 (Part 1):1974 Reviewed In : 2018 |
Specification For cotton Covered Copper Conductors : Part 1 round conductors
|
June, 2018
|
2
|
Modified/Technically Equivalent
|
|
|
IS 7391 (Part 2):1974 Reviewed In : 2018 |
Specification for cotton covered copper conductors: Part 2 rectangular conductors
|
June, 2018
|
-
|
Indigenous
|
|
|
IS 7404 (Part 1):1991 Reviewed In : 2021 |
Paper covered copper conductors - Specification: Part 1 round conductors (First Revision)
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 7576:1974 Reviewed In : 2018 |
Specification for bunched enamelled copper wires with silk covering
|
June, 2018
|
-
|
Modified/Technically Equivalent
|
|
|
IS 8572:1993 Reviewed In : 2018 |
Paper - Covered flexible/stranded copper conductors for transformer leads - Specification (First Revision)
|
June, 2018
|
-
|
Indigenous
|
|
|
IS 8783 (Part 1):1995 Reviewed In : 2021 |
Winding wires for submersible motors - Specification: Part 1 conductor data (First Revision)
|
March, 2021
|
2
|
Indigenous
|
|
|
IS 8783 (Part 2):1995 Reviewed In : 2021 |
Winding wires for submersible motors - Specification: Part 2 materials for dielectric and jacket (First Revision)
|
March, 2021
|
2
|
Indigenous
|
|
|
IS 8783 (Part 3):1995 Reviewed In : 2021 |
Winding wires for submersible motors - Specification: Part 3 methods of tests (First Revision)
|
March, 2021
|
2
|
Indigenous
|
|
|
IS 8783 (Part 4/Sec 1):1995 Reviewed In : 2021 |
Winding wires for submersible motors - Specification: Part 4 specification for indmdual wires: Sec 1 HR PVC insulated wires (First Revision)
|
March, 2021
|
1
|
Indigenous
|
|
|
IS 8783 (Part 4/Sec 2):1995 Reviewed In : 2021 |
Winding wires for submersible motors - specification: Part 4 specification for individual wires: Sec 2 crosslinked polyethylene insulated and polyamide jacketed wires (First Revision)
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8783 (Part 4/Sec 3):1995 Reviewed In : 2021 |
Winding wires for submersible motors - Specification: Part 4 specification for individual wires: Sec 3 polyester and polypropylene insulated winding wires (First Revision)
|
March, 2021
|
1
|
Indigenous
|
| No Records Found |
| No Records Found |
| No Records Found |
| No Records Found | ||
ETD 33 (26796)
Revision of: IS 7391:1974 |
Cotton Covered Copper Conductors Specification Part 1 Round Conductors |
|
ETD 33 (26799)
Revision of: IS 7391:1974 |
Cotton Covered Copper Conductors Specification Part 2 Rectangular Conductors |
|
ETD 33 (26814)
Revision of: IS 8572:1993 |
Paper - Covered flexible stranded copper conductors for transformer leads - Specification |
|
ETD 33 (27209)
Revision of: IS 8783:1995 |
Winding wires for submersible motors - Specification Part 2 materials for dielectric and jacket Second Revision |
|
ETD 33 (27212)
Revision of: IS 8783:1995 |
Winding wires for submersible motors - Specification Part 3 methods of tests Second Revision |
|
ETD 33 (27213)
Revision of: IS 8783:1995 |
Winding wires for submersible motors - Specification Part 4 specification for indmdual wires Sec 1 HR PVC insulated wires Second Revision |
|
ETD 33 (27214)
Revision of: IS 8783:1995 |
Winding wires for submersible motors - specification Part 4 specification for individual wires Sec 2 crosslinked polyethylene insulated and polyamide jacketed wires Second Revision |
|
ETD 33 (27215)
Revision of: IS 8783:1995 |
Winding wires for submersible motors - Specification Part 4 specification for individual wires Sec 3 polyester and polypropylene insulated winding wires Second Revision |
|
ETD 33 (06797)
|
Specifications for particular types of winding wires Part 21 Solderable polyurethane enamelled round copper wire overcoated with polyamide class 155 | |
|
ETD 33 (06798)
|
Specifications for particular types of winding wires Part 23 Solderable polyesterimide enamelled round copper wire class 180 | |
|
ETD 33 (06799)
|
Specifications for particular types of winding wires Part 35 Solderable polyurethane enamelled round copper wire class 155 with a bonding layer | |
|
ETD 33 (06800)
|
Specifications for particular types of winding wires Part 36 Solderable polyesterimide enamelled round copper wire class 180 with a bonding layer | |
|
ETD 33 (06801)
|
Specifications for particular types of winding wires Part 37 Polyesterimide enamelled round copper wire class 180 with a bonding layer | |
|
ETD 33 (06802)
|
Specifications for particular types of winding wires Part 38 Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire class 200 with a bonding layer | |
|
ETD 33 (06803)
|
Specifications for particular types of winding wires Part 46 Aromatic polyimide enamelled round copper wire class 240 | |
|
ETD 33 (06805)
|
Specifications for particular types of winding wires Part 47 Aromatic polyimide enameled rectangular copper wire class 240 | |
|
ETD 33 (06411)
|
SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES PART 20 SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE CLASS 155 | |
|
ETD 33 (10384)
|
SPECIFICATION FOR PARTICULAR TYPES OF WINDING WIRES - POLYESTER ENAMELLED ROUND ALUMINIUM WIRE CLASS 155 | |
|
ETD 33 (10438)
Revision of: IS 5825:2018 |
Test procedure for the determination of the temperature index of enamelled winding wires | |
|
ETD 33 (11215)
Revision of: IS 13730:2018 |
Specification for Particular Types of Winding Wires - Part 0 General requirements Section 1 Enamelled round copper wire | |
|
ETD 33 (11216)
Revision of: IS 13730:2018 |
Specification for Particular Types of Winding Wires - Part 0 General requirements Section 2 Enamelled rectangular copper wire | |
|
ETD 33 (11217)
Revision of: IS 13730:2018 |
Specification for Particular Types of Winding Wires - Part 0 General requirements Section 4 Glass-fibre wound resin or varnish impregnated bare or enamelled rectangular copper wire | |
|
ETD 33 (11218)
Revision of: IS 13730:1993 |
Specification for Particular Types of Winding Wires - Part 1 Polyvinyl acetal enamelled round copper wire class 105 | |
|
ETD 33 (11219)
Revision of: IS 13730:2018 |
Specification for Particular Types of Winding Wires - Part 2 Solderable polyurethane enamelled round copper wire class 130 with a bonding layer | |
|
ETD 33 (11220)
Revision of: IS 13730:2018 |
Specification for Particular Types of Winding Wires - Part 4 Solderable polyurethane enamelled round copper wire class 130 | |
|
ETD 33 (11233)
Revision of: IS 13730:2018 |
Specification for Particular Types of Winding Wires - Part 20 Solderable polyurethane enamelled round copper wire class 155 | |
|
ETD 33 (11298)
Revision of: IS 13730:2018 |
Specification for Particular Types of Winding Wires - Part 27 Paper tape covered rectangular copper wire | |
|
ETD 33 (11299)
Revision of: IS 13730:2018 |
Specification for Particular Types of Winding Wires - Part 28 Polyesterimide enamelled rectangular copper wire class 180 | |
|
ETD 33 (11314)
Revision of: IS 13730:2018 |
Specification for Particular Types of Winding Wires - Part 31 Glass-fibre wound resin or varnish impregnated bare or enamelled rectangular copper wire temperature index 180 | |
|
ETD 33 (11315)
Revision of: IS 13730:2018 |
Specification for Particular Types of Winding Wires - Part 32 Glass-fibre wound resin or varnish impregnated bare or enamelled rectangular copper wire temperature index 155 | |
|
ETD 33 (11316)
Revision of: IS 13730:2018 |
Specification for Particular Types of Winding Wires - Part 33 Glass-fibre wound resin or varnish impregnated bare or enamelled rectangular copper wire temperature index 200 | |
|
ETD 33 (11389)
Revision of: IS 13730:2018 |
Specification for Particular Types of Winding Wires - Part 39 Glass-fibre braided resin or varnish impregnated bare or enamelled rectangular copper wire temperature index 180 | |
|
ETD 33 (11390)
Revision of: IS 13730:2018 |
Specification for Particular Types of Winding Wires - Part 48 Glass-fibre wound resin or varnish impregnated bare or enamelled round copper wire temperature index 155 | |
|
ETD 33 (11391)
Revision of: IS 13730:2018 |
Specification for Particular Types of Winding Wires - Part 49 Glass-fibre wound high temperature resin or varnish impregnated bare or enamelled round copper wire temperature index 180 | |
|
ETD 33 (11392)
Revision of: IS 13730:2018 |
Specification for Particular Types of Winding Wires - Part 50 Glass-fibre wound silicon resin or varnish impregnated bare or enamelled round copper wire temperature index 200 | |
|
ETD 33 (11393)
Revision of: IS 13730:2018 |
Specification for Particular Types of Winding Wires - Part 53 Aromatic polyimide aramid tape wrapped rectangular copper wire temperature index 220 | |
|
ETD 33 (11395)
Revision of: IS 13778:2018 |
Winding Wires - Test Methods Part 4 Chemical Properties | |
|
ETD 33 (11396)
Revision of: IS 13778:2018 |
Winding Wires - Test Methods Part 6 Thermal Properties | |
|
ETD 33 (12680)
|
Winding wires for submersible motors Part 1 Conductor data Amendment - 2 | |
|
ETD 33 (12681)
|
Winding wires for submersible motors Part 2 Materials for dielectric and jacket Amendment - 2 | |
|
ETD 33 (25004)
Revision of: IS 5825:2018 |
Test Procedure for the Determination of the Temperature Index of Enamelled and Tape Wrapped Winding Wires Third Revision | |
|
ETD 33 (25014)
Revision of: IS 13730:2018 |
Particular Types of Winding Wires Specifications Part 0 General Requirements Section 2 Enamelled Rectangular Copper Wire | |
|
ETD 33 (25016)
|
Specifications for Particular Types of Winding Wires Part 0 General Requirements Section 1 Enamelled round copper wire Second Revision Amendment -1 | |
|
ETD 33 (25286)
Revision of: IS 13730:2018 |
Specification for particular types of winding wires Part 0 General requirements Sec 4 glass - Fibre wound resin or varnish impregnated bare or enamelled rectangular copper wire Third Revision | |
|
ETD 33 (25289)
Revision of: IS 13730:2012 |
Specification for Particular Types of Winding Wires Part 0 General Requirements Section 6 Glass-Fibre Wound Resin or Varnish Impregnated Bare or Enamelled Round Copper Wire First Revision | |
|
ETD 33 (25293)
Revision of: IS 13730:1993 |
Specification for Particular Types of Winding Wires Part 1 Polyvinyl Acetal Enamelled Round Copper Wire Class 105 Second Revision | |
|
ETD 33 (25296)
Revision of: IS 13730:2018 |
Specifications for particular types of winding wires Part 2 Solderable polyurethane enamelled round copper wire class 130 with a bonding layer | |
|
ETD 33 (25297)
Revision of: IS 13730:2012 |
Particular types of winding wires Specipication Part 12 Polyvinyl acetal enamelled round copper wire class 120 First Revision | |
|
ETD 33 (25298)
Revision of: IS 13730:2014 |
Specification for particular types of winding wires Part 17 Polyvinyl acetal enamelled rectangular copper wire class 105 | |
|
ETD 33 (25300)
|
Specifications for particular types of winding wires Part 20 solderable polyurethane enamelled round copper wire class 155 Second Revision Amendment - 1 | |
|
ETD 33 (25301)
|
Specifications for particular types of winding wires Part 21 solderable polyurethane enamelled round copper wire overcoated with polyamide class 155 Amendment - 1 | |
|
ETD 33 (25302)
|
Specifications for particular types of winding wires Part 23 solderable polyesterimide enamelled round copper wire class 180 Amendment - 1 | |
|
ETD 33 (25303)
Revision of: IS 13730:2015 |
Particular Types of Winding Wires Specification Part 25 Polyester or Polyesterimide Overcoated with Polyamide-Imide Enamelled Round Aluminium Wire Class 200 First Revision | |
|
ETD 33 (25304)
|
Specifications for particular types of winding wires Part 35 solderable polyurethane enamelled round copper wire class 155 with a bonding layer Amendment - 1 | |
|
ETD 33 (25305)
|
Specifications for particular types of winding wires Part 36 solderable polyesterimide enamelled round copper wire class 180 with a bonding layer Amendment - 1 | |
|
ETD 33 (25306)
Revision of: IS 13778:2011 |
Winding wires - Methods of Test Part 1 General Second Revision | |
|
ETD 33 (25308)
|
Winding wires - Test methods Part 2 determination of dimensions First Revision Amendment - 1 | |
|
ETD 33 (25309)
Revision of: IS 13778:2012 |
Winding Wires - Methods of Test Part 3 Mechanical Properties Second Revision | |
|
ETD 33 (25310)
|
Winding wires - Test methods Part 5 electrical properties First Revision Amendment - 1 | |
|
ETD 33 (25311)
|
Continuously Transposed Conductor CTC Copper Winding Wires | |
|
ETD 33 (26620)
Revision of: IS 2069:1991 |
Drums for covered winding wires and strips for electrical purposes - Specification Third Revision | |
|
ETD 33 (26788)
Revision of: IS 13730:2012 |
Specifications for particular types of winding wires Part 0 General requirements Section 3 Enamelled round aluminium wire Second Revision | |
|
ETD 33 (26903)
|
Specifications for particular types of winding wires - Part 57 Polyamide-imide enameled round copper wire class 220 | |
|
ETD 33 (26934)
|
Specifications for particular types of winding wires Part 27 Paper tape covered Section 1 Round copper wire | |
|
ETD 33 (26935)
|
Particular Types of Winding Wires Specification Part 27 Paper Tape Covered Section 2 Round Aluminium Wire | |
|
ETD 33 (26936)
|
Specifications for particular types of winding wires Part 27 Paper tape covered Section 3 Rectangular copper wire | |
|
ETD 33 (26938)
|
Specifications for particular types of winding wires Part 27 Paper tape covered Section 4 Rectangular aluminium wire | |
|
ETD 33 (27206)
Revision of: IS 8783:1995 |
Winding wires for submersible motors - Specification Part 1 conductor data | |
|
ETD 33 (27374)
|
Specifications for particular types of winding wires Part 13 polyester or polyesterimide overcoated with polyamide - Imide enamelled round copper wire class 200 First Revision Amendment - 1 | |
|
ETD 33 (27375)
|
Specification for particular types of winding wires Part 8 polyesterimide enamelled round copper wire class 180 First Revision Amendment - 1 | |
|
ETD 33 (27481)
Revision of: IS 11184:1984 |
Particular Types of Winding Wires Specifications Part 0 General Requirements Section 1 Enamelled Round Copper Wire | |
|
ETD 33 (27842)
|
Particular types of winding wires - Specipication Part 12 Polyvinyl acetal enamelled round copper wire class 120 First Revision Amendment - 1 | |
|
ETD 33 (27843)
|
Specifications for particular types of winding wires Part 28 polyesterimide enamelled rectangular copper wire class 180 First Revision Amendment - 1 | |
|
ETD 33 (27844)
|
Specifications for particular types of winding wires Part 37 polyesterimide enamelled round copper wire class 180 with a bonding layer Amendment - 1 | |
|
ETD 33 (27845)
|
Specifications for particular types of winding wires Part 38 polyester or polyesterimide overcoated with polyamide - Imide enamelled round copper wire class 200 with a bonding layer Amendment - 1 | |
|
ETD 33 (27850)
|
Specifications for particular types of winding wires Part 46 aromatic polyimide enamelled round copper wire class 240 Amendment - 1 | |
|
ETD 33 (27851)
|
Specifications for particular types of winding wires Part 47 aromatic polyimide enamelled rectangular copper wire class 240 Amendment - 1 | |
|
ETD 33 (27859)
Revision of: IS 13730:1994 |
Specifications for particular types of winding wires Part 15 Polyesterimide enamelled round aluminium wire class 180 |
|
|
IS 10031:1981 Reviewed In : 2015 |
Taper Barrelled Delivery Spools For Covered Round Electrical Winding Wires |
|
|
IS 10114:1982 |
Enamelled and varnish bonded glass covered rectangular copper wires |
|
|
IS 10452 (Part 1):1983 |
Methods of tests for covered conductors for electrical equipment Part 1 Paper covered and cotton covered conductors |
|
|
IS 10452 (Part 2):1983 |
Methods of tests for covered conductors for electrical equipment Part 2 Fibrous covered conductors |
|
|
IS 11184:1984 Reviewed In : 2021 |
Specification for enamelled and varnish bonded glass fibre covered round copper wires |
|
|
IS 11395:1985 Reviewed In : 2020 |
Specification for tape wrapped round copper wires with temperature index 220 |
|
|
IS 11597:1986 Reviewed In : 2021 |
Specification for polyester tape wrapped varnish bonded glass - Fibre covered rectangular copper conductors |
|
|
IS 13343:1992 Reviewed In : 2018 |
Guide for thermal endurance of enamelled and varnish bonded glass covered rectangular copper conductor |
|
|
IS 13730 (Part 7):1993 Reviewed In : 2013 |
Articular Types Of Winding Wires Part 7 Polyimide Enamelled Round Copper Wireclass 220 superseeds Is 4800 part 11 1981 |
|
|
IS 1594:1960 |
Metric sizes of copper wires and conductors for electrical purposes |
|
|
IS 1595:1967 |
Enamelled round copper wire with high mechanical properties |
|
|
IS 1666:1961 |
Paper-covered rectangular copper conductors for transformer windings |
|
|
IS 2068:1962 |
Cotton Covered Rectangular Copper Conductors |
|
|
IS 2659:1964 |
Enamelled round copper wire for elevated temperatures |
|
|
IS 3454:1966 |
Paper-covered Round Copper Conductors |
|
|
IS 3855 (Part 1):1978 |
Rectangular and square enamelled copper conductors Part 1 Thickness of enamel coating |
|
|
IS 3855 (Part 2):1979 |
Rectangular and square enamelled copper conductors Part 2 Methods of tests |
|
|
IS 3855 (Part 3):1978 |
Rectangular and square enamelled copper conductors Part 3 Wires with high mechanical properties |
|
|
IS 3855 (Part 4):1981 |
Rectangular and square enamelled copper conductors Part 4 Wires with temperature indes 155 |
|
|
IS 3855 (Part 5):1984 |
Rectangular and square enamelled copper conductors Part 5 Wire with temperature indes 180 |
|
|
IS 396:1953 |
Bare annealed high-conductivity copper wire for electrical machinery and apparatus tentative |
|
|
IS 449:1962 |
Enamelled high-conductivity annealed round copper wire oleoresinous enamel Revised |
|
|
IS 450:1964 |
Cotton Covered Round Copper Conductors |
|
|
IS 4685 (Part 1):1968 Reviewed In : 2015 |
Varnish bonded glass-fibre covered copper conductors Part 1 Round wires |
|
|
IS 4685 (Part 2):1984 |
Varnish bonded glass-fibre covered copper conductors Part 2 Rectangular conductors |
|
|
IS 4718:1968 |
Multiple paper-covered round copper conductors |
|
|
IS 4800 (Part 1):1968 |
Enamelled round winding wires Part 1 Conductors data |
|
|
IS 4800 (Part 2):1968 |
Enamelled round winding wires Part 2 Maximum overall diameters |
|
|
IS 4800 (Part 3):1968 |
Enamelled round winding wires Part 3 Methods of tests |
|
|
IS 4800 (Part 4):1968 |
Enamelled round winding wires Part 4 Wires with high mechanical properties |
|
|
IS 4800 (Part 5):1968 |
Enamelled round winding wires Part 5 Wires for elevated temperatures |
|
|
IS 4800 (Part 6):1968 |
Enamelled round winding wires Part 6 Wires with self-fluxing properties |
|
|
IS 4800 (Part 7):1970 |
Enamelled round winding wires Part 7 Wires with good dielectric properties under humid conditions |
|
|
IS 4800 (Part 8):1970 |
Enamelled round winding wires Part 8 Wires for use in refrigeration systems |
|
|
IS 4800 (Part 9):1971 |
Enamelled round winding wires Part 9 Wires with temperature index 180 |
|
|
IS 4800 (Part 10):1977 |
Enamelled round winding wires Part 10 Self bonding wires |
|
|
IS 4800 (Part 11):1981 |
Enamelled round winding wires Part 11 Wires with temperature index 220 |
|
|
IS 4800 (Part 12):1986 |
Enamelled round winding wires Part 12 Self bonding wires heat or solvent bonding enamelled round copper wires with temperature index 155 |
|
|
IS 4800 (Part 13):1989 |
Enamelled round winding wires Part 13 Dual coated wires with temperature index 200 |
|
|
IS 4800 (Part 14):1991 |
Enamelled round winding wires Part 14 Wires with self fluxing properties and temperature index 155 |
|
|
IS 482:1981 Reviewed In : 2015 |
Reels for Covered Round Electrical Winding Wires |
|
|
IS 6160:1971 |
Rectangular conductors for electrical machines |
|
|
IS 6181:1971 Reviewed In : 2018 |
Specification for varnish bonded glass - Fibre braided rectangular copper conductors |
|
|
IS 7404 (Part 2):1991 |
Paper covered copper conductors Part 2 Rectangular conductors |
|
|
IS 9148:1979 Reviewed In : 2015 |
Tape wrapped rectangular and square copper wires with a temperature index of 220 |
|
|
IS 9778:1981 Reviewed In : 2021 |
Guide for evaluation of thermal endurance of varnish bonded glass fibre covered rectangular copper conductors |
|
IS 11174:1984 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for aromatic polyimide paper covered rectangular and square copper wires with temperature index 200 |
|
|
IS 13730 (Part 6):1994 Reaffirmed but not taken up for revision |
Specification for particular types of winding wires Part 6 oleo - Resinous enamelled round aluminium wire class 105 |
|
|
IS 13730 (Part 34):2000 IEC 60317-34 |
Specifications for particular types of winding wires Part 34 polyester enamelled round copper wire class 130 L First Revision |
|
|
IS 13730 (Part 0/Sec 1):2018 EC 60317-0-1 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 0 general requirements Sec 1 enamelled round copper wire Second Revision |
|
|
IS 13730 (Part 0/Sec 2):2024 IEC 60317-0-2:2020 |
Particular Types of Winding Wires Specifications Part 0 General Requirements Section 2 Enamelled Rectangular Copper Wire Third Revision |
|
|
IS 13730 (Part 0/Sec 3):2012 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 0 general requirements Sec 3 enamelled round aluminium wire First Revision |
|
|
IS 13730 (Part 0/Sec 4):2024 IEC 60317-0-4:2020 |
Specification for particular types of winding wires Part 0 General requirements Sec 4 glass - Fibre wound resin or varnish impregnated bare or enamelled rectangular copper wire Third Revision |
|
|
IS 13730 (Part 0/Sec 5):2012 EC 60317-0-5 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 0 general requirements Sec 5 glass - Fibre braided resin or varnish impregnated bare or enamelled rectangular copper wire First Revision |
|
|
IS 13730 (Part 0/Sec 6):2024 IEC 60317-0-6:2020 |
Specification for Particular Types of Winding Wires Part 0 General Requirements Section 6 Glass-Fibre Wound Resin or Varnish Impregnated Bare or Enamelled Round Copper Wire First Revision |
|
|
IS 13730 (Part 1):2025 IEC 60317-1:2010+AMD1:2024 CSV |
Specification for Particular Types of Winding Wires Part 1 Polyvinyl Acetal Enamelled Round Copper Wire Class 105 Second Revision |
|
|
IS 13730 (Part 2):2024 IEC 60317-2:2019+AMD1:2024 CSV |
Specifications for particular types of winding wires Part 2 Solderable polyurethane enamelled round copper wire class 130 with a bonding layer |
|
|
IS 13730 (Part 3):2012 IEC 60317-3 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 3 polyester enamelled round copper wire class 155 First Revision |
|
|
IS 13730 (Part 4):2018 IEC 60317-4 : 2015 Reviewed In : 2024 |
Specification for particular types of winding wires Part 4 solderable polyurethane enamelled round copper wire class 130 Second Revision |
|
|
IS 13730 (Part 5):2018 Reviewed In : 2024 |
Specification for Particular Types of Winding Wires Part 5 Polyester Enamelled Round Aluminium Wire Class 155 |
|
|
IS 13730 (Part 8):2014 IEC 60317-8 : 2010 Reviewed In : 2024 |
Specification for particular types of winding wires Part 8 polyesterimide enamelled round copper wire class 180 First Revision |
|
|
IS 13730 (Part 9):1994 Reviewed In : 2024 Reaffirmed but not taken up for revision |
Specification for particular types of winding wires Part 9 polyester enamelled round aluminium wire class 138 |
|
|
IS 13730 (Part 12):2024 IEC 60317-12:2020 |
Particular types of winding wires - Specipication Part 12 Polyvinyl acetal enamelled round copper wire class 120 First Revision |
|
|
IS 13730 (Part 13):2014 IEC 60317-13 : 2010 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 13 polyester or polyesterimide overcoated with polyamide - Imide enamelled round copper wire class 200 First Revision |
|
|
IS 13730 (Part 15):1994 IEC 60317-15 Reviewed In : 2021 Reaffirmed but not taken up for revision |
Particular types of winding wires Part 15 polyesterimide enammelled round aluminium wire class 180 |
|
|
IS 13730 (Part 16):1996 IEC 60317-16 Reviewed In : 2024 Reaffirmed but not taken up for revision |
Specifications for particular types of winding wires Part 16 polyester enamelled rectangular copper wire class 155 |
|
|
IS 13730 (Part 17):2024 IEC 60317-17:2020 |
Specification for particular types of winding wires Part 17 Polyvinyl acetal enamelled rectangular copper wire class 105 SECOND REVISION |
|
|
IS 13730 (Part 20):2018 IEC 60317-20 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 20 solderable polyurethane enamelled round copper wire class 155 Second Revision |
|
|
IS 13730 (Part 21):2017 IEC 60317-21 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 21 solderable polyurethane enamelled round copper wire overcoated with polyamide class 155 |
|
|
IS 13730 (Part 23):2017 IEC 60317-23 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 23 solderable polyesterimide enamelled round copper wire class 180 |
|
|
IS 13730 (Part 25):2024 IEC 60317-25:2020 |
Particular Types of Winding Wires - Specification Part 25 Polyester or Polyesterimide Overcoated with Polyamide-Imide Enamelled Round Aluminium Wire Class 200 First Revision |
|
|
IS 13730 (Part 26):1996 IEC 60317-26 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specifications for particular types of winding wires Part 26 polyamide - Imide enamelled round copper wire class 200 |
|
|
IS 13730 (Part 27):2018 IEC 60317-27 : 2013 Reviewed In : 2024 |
Specifications for Particular Types of Winding Wires Part 27 Paper Tape Covered Rectangular Copper Wire First Revision |
|
|
IS 13730 (Part 27/Sec 1):2025 IEC 60317-27-1:2020+AMD1:2024 CSV |
Specifications for particular types of winding wires Part 27 Paper tape covered Section 1 Round copper wire |
|
|
IS 13730 (Part 27/Sec 2):2025 IEC 60317-27-2:2020+AMD1:2024 CSV |
Particular Types of Winding Wires Specification Part 27 Paper Tape Covered Section 2 Round Aluminium Wire |
|
|
IS 13730 (Part 27/Sec 3):2025 IEC 60317-27-3:2019+AMD1:2024 CSV |
Specifications for particular types of winding wires Part 27 Paper tape covered Section 3 Rectangular copper wire |
|
|
IS 13730 (Part 27/Sec 4):2025 IEC 60317-27-4:2020+AMD1:2024 CSV |
Specifications for particular types of winding wires Part 27 Paper tape covered Section 4 Rectangular aluminium wire |
|
|
IS 13730 (Part 28):2018 IEC 60317-28 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 28 polyesterimide enamelled rectangular copper wire class 180 First Revision |
|
|
IS 13730 (Part 29):1996 IEC 60317-29 Reviewed In : 2024 Reaffirmed but not taken up for revision |
Specifications for particular types of winding wires Part 29 polyester or polyesterimide overcoated with polyamide - Imide enamelled rectangular copper wire class 200 |
|
|
IS 13730 (Part 31):2018 IEC 60317-31 : 2015 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 31 glass fibre wound resin or varnish impregnated bare or enamelled rectangular copper wire temperature index 180 First Revision |
|
|
IS 13730 (Part 32):2018 IEC 60317-32 : 2015 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 32 glass fibre wound resin or varnish impregnated bare or enamelled rectangular copper wire temperature index 155 First Revision |
|
|
IS 13730 (Part 33):2018 IEC 60317-33 : 2015 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 33 glass fibre wound resin or varnish impregnated bare or enamelled rectangular copper wire temperature index 200 First Revision |
|
|
IS 13730 (Part 35):2017 IEC 60317-35 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 35 solderable polyurethane enamelled round copper wire class 155 with a bonding layer |
|
|
IS 13730 (Part 36):2017 IEC 60317-36 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 36 solderable polyesterimide enamelled round copper wire class 180 with a bonding layer |
|
|
IS 13730 (Part 37):2017 IEC 60317-37 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 37 polyesterimide enamelled round copper wire class 180 with a bonding layer |
|
|
IS 13730 (Part 38):2018 IEC 60317-38 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 38 polyester or polyesterimide overcoated with polyamide - Imide enamelled round copper wire class 200 with a bonding layer |
|
|
IS 13730 (Part 39):2018 IEC 60317-39 : 2015 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 39 glass - Fibre braided resin or varnish - Impregnated bare or enamelled rectangular copper wire temperature index 180 First Revision |
|
|
IS 13730 (Part 43):2013 IEC 60317-43 Reviewed In : 2024 |
Specification for particular types of winding wires Part 43 aromatic polyimide tape wrapped round copper wire class 240 First Revision |
|
|
IS 13730 (Part 44):2013 IEC 60317-44 Reviewed In : 2024 |
Specification for particular types of winding wires Part 44 aromatic polyimide tape wrapped rectangular copper wire class 240 First Revision |
|
|
IS 13730 (Part 45):1999 IEC 60317-45 Reviewed In : 2024 Reaffirmed but not taken up for revision |
Specifications for particular types of winding wires Part 45 polyester enamelled round copper wire class 130 |
|
|
IS 13730 (Part 46):2017 IEC 60317-46 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 46 aromatic polyimide enamelled round copper wire class 240 |
|
|
IS 13730 (Part 47):2017 IEC 60317-47 : 2013 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 47 aromatic polyimide enamelled rectangular copper wire class 240 |
|
|
IS 13730 (Part 48):2018 IEC 60217-48 : 2012 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 48 glass - Fibre wound resin or varnish impregnated bare or enamelled round copper wire temperature index 155 First Revision |
|
|
IS 13730 (Part 49):2018 IEC 60317-49 : 2012 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 49 glass - Fibre wound high temperature resin or varnish - Impregnated bare or enamelled round copper wire class 180 First Revision |
|
|
IS 13730 (Part 50):2018 IEC 60317-50 : 2012 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 50 glass - Fibre wound silicone resin or varnish impregnated bare or enamelled round copper wire class 200 First Revision |
|
|
IS 13730 (Part 53):2018 IEC60317-53 : 2014 Reviewed In : 2024 |
Specifications for particular types of winding wires Part 53 aromatic polyimide Aramid tape wrapped rectangular copper wire temperature index 220 First Revision |
|
|
IS 13730 (Part 57):2025 IEC 60317-57 |
Specifications for particular types of winding wires - Part 57 Polyamide-imide enameled round copper wire class 220 |
|
|
IS 14841 (Part 3/Sec 2):2000 IEC 60264-3-2 |
Packaging of winding wires Part 3 taper barrelled delivery spools Sec 2 specification for returnable spools made fromThermoplastic materials |
|
|
IS 14841 (Part 3/Sec 3):2000 |
Packaging of winding wires Part 3 taper barrelled dellVery spools Sec 3 specification for non - Returnable spools made from thermoplastic material |
|
|
IS 14841 (Part 2/Sec 2):2000 IEC 60264-2-2 |
Packaging of winding wires Part 2 cylindrical barrelled delivery spools Sec 2 specification for returnable spools made fromThermoplastic materials |
|
|
IS 19059:2024 |
Continuously Transposed Conductor CTC Copper Winding Wires |
|
|
IS 2069:2025 |
Drums for covered winding wires and strips for electrical purposes - Specification Third Revision |
|
|
IS 6162 (Part 1):1971 Reviewed In : 2018 |
Specification for paper - Covered aluminium conductors Part 1 round conductors |
|
|
IS 6162 (Part 2):1971 Reviewed In : 2018 |
Specification for paper covered aluminium conductors Part 2 rectangular conductors |
|
|
IS 7391 (Part 1):1974 Reviewed In : 2018 |
Specification For cotton Covered Copper Conductors Part 1 round conductors |
|
|
IS 7391 (Part 2):1974 Reviewed In : 2018 |
Specification for cotton covered copper conductors Part 2 rectangular conductors |
|
|
IS 7404 (Part 1):1991 Reviewed In : 2021 |
Paper covered copper conductors - Specification Part 1 round conductors First Revision |
|
|
IS 7576:1974 Reviewed In : 2018 |
Specification for bunched enamelled copper wires with silk covering |
|
|
IS 8572:1993 Reviewed In : 2018 |
Paper - Covered flexible stranded copper conductors for transformer leads - Specification First Revision |
|
|
IS 8783 (Part 4/Sec 1):1995 Reviewed In : 2021 |
Winding wires for submersible motors - Specification Part 4 specification for indmdual wires Sec 1 HR PVC insulated wires First Revision |
|
|
IS 8783 (Part 4/Sec 2):1995 Reviewed In : 2021 |
Winding wires for submersible motors - specification Part 4 specification for individual wires Sec 2 crosslinked polyethylene insulated and polyamide jacketed wires First Revision |
|
|
IS 8783 (Part 4/Sec 3):1995 Reviewed In : 2021 |
Winding wires for submersible motors - Specification Part 4 specification for individual wires Sec 3 polyester and polypropylene insulated winding wires First Revision |