BUREAU OF INDIAN STANDARDS
Programme of Work
MED17 : Chemical Engineering Plants And Related Equipment
- Scope : Formulation of Standards for various equipment used in the chemical industry including: (a) Static equipment; (b) Rotating equipment; (c) Instrumentation and automation; and (d) Fittings and valves etc.
-
Liaison :ISO/TC 112 - Vacuum technology - Participating (P)
ISO/TC 153 - Valves - Participating (P)
ISO/TC 153/WG 1 - Valve actuators and valve actuators attachments
ISO/TC 270 - Plastics and rubber machines - Participating (P)
ISO TC 153/WG 5 - Fugitive emissions - Participating (P)
ISO TC 153/WG 12 - Isolating valves for low-temperature applications - Participating (P)
ISO TC 153/WG 15 - Automatic steam traps - Participating (P)
ISO TC 270/WG 2 - Extruders - Participating (P)
|
IS 10218:2025 |
GRINDABILITY INDEX - METHOD OF TEST ( First Revision )
|
-
|
Indigenous
|
||
|
IS/ISO 10434:2020 ISO 10434:2020 Reviewed In : 2024 |
Bolted Bonnet Steel Gate Valves for the Petroleum, Petrochemical and Allied Industries
|
June, 2024
|
-
|
Identical under single numbering
|
|
|
IS 10459:2024 |
General Purpose Plug Valves - Specification (First Revision)
|
-
|
Indigenous
|
||
|
IS 10605:1989 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Steel globe valves (Flanged And Butt Welded Ends) for petroleum, petrochemical and allied industries - Specification (First Revision)
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 10661:2024 |
Glass Fibre Reinforced Polyester Chemical Resistant Tanks - Specification (First Revision)
|
-
|
Indigenous
|
||
|
IS 10688:2024 |
Method for Proving Gas - Tightness of Vacuum Plants - Method of Test (First Revision)
|
-
|
Indigenous
|
||
|
IS 10874:1983 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for felsite grinding media and liner stones
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 10989:1984 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for cast or forged steel check valves (Flanged Or Butt Welding Ends) for petroleum, petrochemicals, chemicals and allied industries
|
July, 2020
|
1
|
Indigenous
|
|
|
IS 11132:2024 |
Ammonia Valves - Specification (First Revision)
|
-
|
Indigenous
|
||
|
IS 11332:2025 |
Industrial Ovens - Code of Practice ( First Revision )
|
-
|
Indigenous
|
||
|
IS 11552:2020 Reviewed In : 2024 |
Liquid Nitrogen Vessels of Capacity up to 75 Litres — Specification ( Second Revision )
|
June, 2024
|
1
|
Indigenous
|
|
|
IS 11611:2022 ISO 10497 |
Testing of Valves - Fire Type-Testing Requirements (second revision)
|
-
|
Identical under dual numbering
|
||
|
IS 11620:2024 |
Fluid Bed Dryer - Code of Practice (First Revision)
|
-
|
Indigenous
|
||
|
IS 11699:1986 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specification for steel plug valves for petroleum, petrochemical and allied industries
|
September, 2018
|
-
|
Indigenous
|
|
|
IS 11790:2024 |
Preparation of Butt Welding Ends for Pipes, Valves, Flanges and Fittings - Code of Practice (First Revision)
|
-
|
Indigenous
|
||
|
IS 11791:1986 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specification for diaphragm type valves for general purposes
|
September, 2018
|
-
|
Indigenous
|
|
|
IS 12213:2025 |
Mechanical Vibrating Screens - Code of Practice ( First Revision )
|
-
|
Indigenous
|
||
|
IS 12370 (Part 2):2023 ISO 4126-2:2018 |
SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE PART 2 BURSTING DISC SAFETY DEVICES (Second Revision of IS 12370 )
|
-
|
Identical under dual numbering
|
||
|
IS 12370 (Part 3):2023 ISO 4126-3: 2020 |
SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE PART 3 SAFETY VALVES AND BURSTING DISC SAFETY DEVICES IN COMBINATION (Second Revision of IS 12370 )
|
-
|
Identical under dual numbering
|
||
|
IS 12370 (Part 4):2023 ISO 4126-4: 2013 |
SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE PART 4 PILOT OPERATED SAFETY VALVES (Second Revision of IS 12370 )
|
-
|
Identical under dual numbering
|
||
|
IS 12370 (Part 5):2023 ISO 4126-5: 2013 |
SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE PART 5 CONTROLLED SAFETY PRESSURE RELIEF SYSTEMS CSPRS (Second Revision of IS 12370 )
|
-
|
Identical under dual numbering
|
||
|
IS 12370 (Part 6):2023 ISO 4126-6: 2014 |
SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE PART 6 APPLICATION SELECTION AND INSTALLATION OF BURSTING DISC SAFETY DEVICES ( Second Revision of IS 12370 )
|
-
|
Identical under dual numbering
|
||
|
IS 12754 (Part 1):1989 ISO 3511-1 Reviewed In : 2020 |
Process measurement controli functions and instrumentation - Symbolic representation: Part 1 basic requirements
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 12754 (Part 2):1989 ISO 3511-2 Reviewed In : 2020 |
Process measurement control functions and instrumentation - Symbolic representation: Part 2 extension of basic requirements
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 12754 (Part 3):1989 ISO 3511-3 Reviewed In : 2020 |
Process measurement control functions and instrumentation - Symbolic representation: Part 3 detailed symbols for instrument interconnection diagrams
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 12754 (Part 4):1989 ISO 3511-4 Reviewed In : 2020 |
Industrial process measurement control functions and instrumentation - Symbolic representation: Part 4 basic symbols for process computer, interface, and shared display/control functions
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 12992 (Part 1):2024 |
Safety Relief Valves - Spring Loaded - Specification Part 1 Design (First Revision)
|
-
|
Indigenous
|
||
|
IS 12992 (Part 2):2023 |
SPRING LOADED SAFETY RELIEF VALVES SPECIFICATION PART 2 TESTING (First Revision)
|
-
|
Indigenous
|
||
|
IS 13095:2020 Reviewed In : 2024 |
Butterfly Valves for General Purposes ( First Revision )
|
June, 2024
|
2
|
Indigenous
|
|
|
IS 13159 (Part 1):1993 Reviewed In : 2018 |
Pipe flanges and flanged fittings specification: Part 1 dimensions
|
September, 2018
|
-
|
Indigenous
|
|
|
IS 13187:1991 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Road tankers for light petroleum products - Specification
|
September, 2018
|
1
|
Indigenous
|
|
|
IS 14404:1996 Reviewed In : 2022 Reaffirmed but not taken up for revision |
Process equipment - Recommendations on design pressure and temperature
|
January, 2022
|
-
|
Indigenous
|
|
|
IS 15729:2007 Reviewed In : 2022 |
Natural gas pressure regulating and metering terminal - Code of practice
|
January, 2022
|
-
|
Indigenous
|
|
|
IS/ISO 15761:2020 ISO 15761 Reviewed In : 2024 |
STEEL GATE GLOBE AND CHECK VALVES FOR SIZES DN 100 AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
|
June, 2024
|
-
|
Identical under single numbering
|
|
|
IS/ISO 15848-1:2015 ISO 15848 -1 : 2015 |
Industrial valves Measurement test and qualification procedures for fugitive emissions Part 1: Classification system and qualification procedures for type testing of valves
|
-
|
Identical under dual numbering
|
||
|
IS/ISO 15848-2:2015 15848 -2 : 2015 |
Industrial valves Measurement test and qualification procedures for fugitive emissions Part 2: Production acceptance test of valves
|
-
|
Identical under single numbering
|
||
|
IS/ISO 16136:2006 16136 |
Industrial valves Butterfly valves of thermoplastics materials
|
-
|
Identical under single numbering
|
||
|
IS/ISO 17292:2015 17292 |
Metal ball valves for petroleum petrochemical and allied industries First Revision
|
-
|
Identical under single numbering
|
||
|
IS/ISO 20430:2020 ISO 20430 : 2020 Reviewed In : 2024 |
Plastics and Rubber Machines — Injection Moulding Machines — Safety Requirements
|
June, 2024
|
-
|
Identical under single numbering
|
|
|
IS/ISO 21360-1:2020 ISO 21360 (Part 1) |
VACUUM TECHNOLOGY STANDARD METHOD FOR MEASURING VACUUM- PUMP PERFORMANCE PART 1 GENERAL DESCRIPTION
|
-
|
Identical under dual numbering
|
||
|
IS/ISO 21360-2:2020 ISO 21360-2: 2020 |
VACUUM TECHNOLOGY STANDARD METHOD FOR MEASURING VACUUM- PUMP PERFORMANCE PART 2 POSITIVE DISPLACEMENT VACUUM PUMPS [ Amalgamation of IS 6849 ( Part 1,2 and 3 ) ]
|
-
|
Identical under single numbering
|
||
|
IS/ISO 22109:2020 ISO 22109 : 2020 Reviewed In : 2024 |
Industrial Valves - Gearbox for Valves
|
June, 2024
|
-
|
Identical under single numbering
|
|
|
IS/ISO 22153:2020 SO 22153 : 2020 Reviewed In : 2024 |
Electric Actuators for Industrial Valves - General Requirements
|
June, 2024
|
-
|
Identical under single numbering
|
|
|
IS/ISO 23632:2021 ISO 23632: 2021 |
INDUSTRIAL VALVES DESIGN VALIDATION - TESTING OF VALVES (Adoption of ISO 23632 )
|
-
|
Identical under single numbering
|
||
|
IS 2379:2024 |
Colour Code for Pipeline Identification - Code of Practice (Second Revision)
|
-
|
Indigenous
|
||
|
IS/ISO 2861:2020 ISO 2861:2020 |
VACUUM TECHNOLOGY DIMENSIONS OF CLAMPED-TYPE QUICKRELEASE COUPLINGS Adoption of ISO 2861
|
-
|
Identical under dual numbering
|
||
|
IS 3133:2024 |
Manhole and Inspection Openings for Chemical Equipment - General Requirements (Second Revision)
|
-
|
Indigenous
|
||
|
IS 3232:2024 |
Recommendations on Graphical Symbols for Process Flow Diagrams, Piping and Instrumentation Diagrams (Third Revision)
|
-
|
Indigenous
|
||
|
IS 3233:2024 |
Safety and Relief Valves and their Parts - Glossary of Terms (First Revision)
|
-
|
Indigenous
|
||
|
IS/ISO 3669:2020 ISO 3669: 2020 |
VACUUM TECHNOLOGY DIMENSIONS OF KNIFE-EDGE FLANGES Adoption of ISO 3669
|
-
|
Identical under dual numbering
|
||
|
IS 4092 (Part 1):2025 |
Centrifuges of the Basket and Bowl and Vibrating Type for use in Industrial and Commercial Applications - Specification (THIRD REVISION)
|
-
|
Indigenous
|
||
|
IS 4110 (Part 1):2022 ISO 3529-1:2019 |
Vacuum Technology - Vocabulary Part 1 General Terms (first revision)
|
-
|
Identical under dual numbering
|
||
|
IS 4110 (Part 2):2023 ISO 3529-2:2020 |
VACUUM TECHNOLOGY VOCABULARY PART 2 VACUUM PUMPS AND RELATED TERMS (First Revision of IS 4110 )
|
-
|
Identical under dual numbering
|
||
|
IS 4110 (Part 3):2023 ISO 3529-3: 2014 |
VACUUM TECHNOLOGY VOCABULARY PART 3 TOTAL AND PARTIAL PRESSURE VACUUM GAUGES (First Revision of IS 4110 )
|
-
|
Identical under dual numbering
|
||
|
IS/ISO 4126-1:2013 ISO 4126-1:2013 |
SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE PART 1 SAFETY VALVES Adoption of ISO 4126 Part 1
|
-
|
Identical under single numbering
|
||
|
IS 4179:2024 |
Sizes of Process Vessels and Leading Dimensions (First Revision)
|
-
|
Indigenous
|
||
|
IS 4642:2024 |
Ball, Pebble and Tube Mills - Code of Practice (First Revision)
|
-
|
Indigenous
|
||
|
IS 4682 (Part 1):2024 |
Medical Lining of Vessels and Equipment for Chemical Processes - Code of Practice Part 1 Rubber Lining (Second Revision)
|
-
|
Indigenous
|
||
|
IS 4682 (Part 2):2024 |
Lining of Vessels and Equipment for Chemical Processes - Code of Practice Part 2 Glass Enamel Lining (First Revision)
|
-
|
Indigenous
|
||
|
IS 4682 (Part 3):2024 |
Lining of Vessels and Equipment for Chemical Processes - Code of Practice Part 3 Lead Lining (First Revision)
|
-
|
Indigenous
|
||
|
IS 4682 (Part 4):2024 |
Lining of Vessels and Equipment for Chemical Processes - Code of Practice Part 4 Lining with Sheet Thermoplastics (Second Revision)
|
-
|
Indigenous
|
||
|
IS 4682 (Part 5):2024 |
Lining of Vessels and Equipment for Chemical Processes - Code of Practice Part 5 Epoxide Resin Lining (First Revision)
|
-
|
Indigenous
|
||
|
IS 4682 (Part 6):2024 |
Lining of Vessels and Equipment for Chemical Processes - Code of Practice Part 6 Phenolic Resin Lining (First Revision)
|
-
|
Indigenous
|
||
|
IS 4682 (Part 7):1974 Reviewed In : 2020 |
Code of practice for lining of vessels and equipment for chemical processes: Part 7 corrosion and heat resistant metals
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 4682 (Part 7):2025 |
Lining of Vessels and Equipment for Chemical Processes - Code of Practice Part 7 Corrosion and Heat Resistant Metals ( First Revision )
|
-
|
Indigenous
|
||
|
IS 4682 (Part 8):2024 |
Lining of Vessels and Equipment for Chemical Processes - Code of Practice Part 8 Precious Metals (First Revision)
|
-
|
Indigenous
|
||
|
IS 4682 (Part 9):1974 Reviewed In : 2020 |
Code of practice for lining of vessels and equipment for chemical processes: Part 9 titanium
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 4682 (Part 9):2025 |
Lining of Vessels and Equipment for Chemical Processes - Code of Practice Part 9 Titanium ( First Revision )
|
-
|
Indigenous
|
||
|
IS 4682 (Part 10):1974 Reviewed In : 2020 |
Code of practice for lining of vessels and equipment for chemical processes: Part 10 brick and tile
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 4682 (Part 10):2025 |
Lining of Vessels and Equipment for Chemical Processes - Code of Practice Part 10 Brick and Tile ( First Revision )
|
-
|
Indigenous
|
||
|
IS 4854 (Part 1):2023 |
GLOSSARY OF TERMS FOR VALVES AND THEIR PARTS PART 1 SCREW- DOWN STOP CHECK AND GATE VALVES AND THEIR PARTS ( First Revision )
|
-
|
Indigenous
|
||
|
IS 4854 (Part 2):2024 |
Glossary of Terms for Valves and their Parts Part 2 Plug Valves and Cocks and their Parts (First Revision)
|
-
|
Indigenous
|
||
|
IS 4854 (Part 3):2023 |
GLOSSARY OF TERMS FOR VALVES AND THEIR PARTS PART 3 BUTTERFLY VALVES ( First Revision )
|
-
|
Indigenous
|
||
|
IS 4864 (Part 4870):1968 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for shell flanges for vessels and equipment
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 4870:1968 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Flat gaskets for shell flanges - (SEE IS 4864 TO IS 4870)
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 5036:1969 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for filter presses, recessed plate type, and plate and frame type
|
July, 2020
|
-
|
Indigenous
|
|
|
IS/ISO 5210:2017 ISO 5210 : 2017 |
Industrial Valves — Multi-Turn Valve Actuator Attachments
|
-
|
Identical under single numbering
|
||
|
IS/ISO 5211:2017 ISO 5211 : 2017 |
Industrial Valves — Part-Turn Actuator Attachments
|
-
|
Identical under single numbering
|
||
|
IS 5428 (Part 1):2023 |
Gauge Glasses � Specification Part 1 Tubular Glasses for Level Gauges (Second Revision)
|
-
|
Indigenous
|
||
|
IS 5428 (Part 2):2023 |
Gauge Glasses - Specification Part 2 Protector Glasses for Tubular Gauge Glasses (Second Revision)
|
-
|
Indigenous
|
||
|
IS 5428 (Part 3):2023 |
Gauge Glasses � Specification Part 3 Through-Vision and Reflex Glasses (Second Revision)
|
-
|
Indigenous
|
||
|
IS 5428 (Part 4):2023 |
Gauge Glasses - Specification Part 4 Circular Sight and Light Glasses ( Second Revision )
|
-
|
Indigenous
|
||
|
IS 5428 (Part 5):2023 |
Gauge Glasses - Specification Part 5 Port Gauge Glasses as used in Fittings for Steam Boilers ( Second Revision )
|
-
|
Indigenous
|
||
|
IS 5675:2024 |
Rotary-Disc Vacuum Filters - Specification (Second Revision)
|
-
|
Indigenous
|
||
|
IS 6034:1989 Reviewed In : 2020 |
Insulating oil conditioning plants - Specification (First Revision)
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 6076:2022 1609 |
Vacuum Technology - Dimensions of Non-Knife Edge Flanges (second revision)
|
-
|
Identical under dual numbering
|
||
|
IS 6088:2024 |
Oil-to-Water Heat Exchangers for Transformers - Specification (Second Revision)
|
-
|
Indigenous
|
||
|
IS 6157:2024 |
VALVE INSPECTION AND TEST - METHODS OF TEST (Second Revision)
|
-
|
Indigenous
|
||
|
IS 6202:2024 |
Flat Glass Oil Level Gauges for Oil Storage Tanks - Specification (First Revision)
|
-
|
Indigenous
|
||
|
IS 6838:1973 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Dimensions for `O' rings and grooves for vacuum flanges
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 6849 (Part 1):1999 ISO 1607 : 1 Reviewed In : 2020 |
Positive displacement vacuum pumps - Measurement of performance characteristics: Part 1 measurement of volume rate of flow (Pumping Speed) (Second Revision)
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 6849 (Part 2):1993 ISO 1607 : 2 Reviewed In : 2018 |
Positive displacement vacuum pumps - Measurement of performance characteristics: Part 2 measurement of ultimate pressure (First Revision)
|
September, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 6849 (Part 3):1976 Reviewed In : 2018 |
Methods of measurement of performance characteristics of positive - Displacement vacuum pumps: Part 3 water vapour pumping capacity
|
September, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 7366:1974 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for edge type filters required for filtration of oils of straight mineral type
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 8243 (Part 1):1999 ISO 1608-1 Reviewed In : 2021 |
Vapour vacuum pumps - Measurement of performance characteristics: Part 1 measurement of volume rate of flow (Pumping Speed) (Second Revision)
|
September, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 8243 (Part 2):1993 ISO 1608-2 Reviewed In : 2021 |
Vapour vacuum pumps - Measurement of performance characteristics: Part 2 measurement of critical backing pressure (First Revision)
|
September, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 8244:2022 ISO 3567: 2011 |
Vacuum Gauges - Calibration by Direct Comparison with a Reference Gauge (first revision)
|
-
|
Identical under dual numbering
|
||
|
IS 8262 (Part 2):1976 ISO 2861-1 Reviewed In : 2021 |
Specification for qusck - Release couplings for vacuum pipelines: Part 2 clamped type
|
September, 2021
|
-
|
Not Equivalent
|
|
|
IS 8276 (Part 1):2025 |
Method for Calibration of vacuum gauges Part 1 Pressure reduction by continuous flow in the pressure range of 10-5 Pa to 10-1Pa ( First Revision )
|
-
|
Indigenous
|
||
|
IS 8280:2022 ISO 27894: 2009 |
Vacuum Technology - Vacuum Gauges - Specifications for Hot Cathode Ionization Gauges (first revision)
|
-
|
Identical under dual numbering
|
||
|
IS 8288:1976 ISO 3669 Reviewed In : 2021 |
Specification for bakeable flanges
|
September, 2021
|
-
|
Not Equivalent
|
|
|
IS 9446:2022 |
Graphical Symbols for Pipelines and Instrumentation Diagrams ( First Revision )
|
-
|
Indigenous
|
||
|
IS 9520:2008 Reviewed In : 2023 |
Nominal sizes for valves (First Revision)
|
December, 2023
|
-
|
Indigenous
|
|
|
IS 9522:2025 |
AGITATOR EQUIPMENT - CODE OF PRACTICE (First Revision)
|
-
|
Indigenous
|
||
|
IS 9618:1980 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for road tankers for liquefied petroleum gas
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 9625:2023 |
Locations of By-Pass and Drain Connections for Valves ( First Revision )
|
-
|
Indigenous
|
||
|
IS 9705 (Part 1):1980 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for quick release coupling for vacuum pipe lines: Part 1 screwed couplings type b
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 9866:2025 |
MARKING SYSTEM FOR VALVES (First Revision)
|
-
|
Indigenous
|
||
|
IS 9884:2023 ISO 5752: 2021 |
Metal Valves for use in Flanged Pipe Systems - Face-to-Face and Centre-to Face Dimensions
|
1
|
Identical under dual numbering
|
||
|
IS 9890:1981 Reviewed In : 2024 |
Specification for general purpose ball valves
|
June, 2024
|
-
|
Indigenous
|
| No Records Found |
| No Records Found |
| No Records Found |
|
MED 17 (26470)
Revision of: IS 6034:1989 |
INSULATING OIL CONDITIONING PLANTS SPECIFICATION Second Revision |
|
|
MED 17 (28363)
|
PLASTICS AND RUBBER MACHINES CLAMPING SYSTEMS PART 1 SAFETY REQUIREMENTS FOR MAGNETIC CLAMPING SYSTEMS |
|
|
MED 17 (28364)
|
GRAPHICAL SYMBOLS FOR DIAGRAMS PART 2 GRAPHICAL SYMBOLS |
|
|
MED 17 (28408)
|
Butterfly Valves for General Purposes First Revision Amendment - 3 |
| No Records Found | ||
|
MED 17 (25840)
Revision of: IS 13159:1993 |
PIPE FLANGES AND FLANGED FITTINGS - CODE OF PRACTICE First Revision |
|
|
IS 10092:1982 Reviewed In : 2018 |
Glossary of terms And Materials Of Construction for rotary equipment |
|
|
IS 10120:1982 Reviewed In : 2018 |
Supplier s Data Sheet For Rotary Dryers |
|
|
IS 10217:1982 Reviewed In : 2020 |
Method of determination of crushability index |
|
|
IS 10219:1982 Reviewed In : 2018 |
Purchaser s data sheet for tube nest evaporation plants |
|
|
IS 10247:1982 Reviewed In : 2020 |
Method of determination of impact index |
|
|
IS 10409:1983 Reviewed In : 2018 |
Purchaser s data sheet for rotary type dryer |
|
|
IS 10444:1983 Reviewed In : 2006 |
Specification for Hammer Mills |
|
|
IS 10611:1983 Reviewed In : 2020 |
Specification for steel gate valves Flanged And Butt - Welded Ends for petroleum petrochemicals and allied industries |
|
|
IS 10732:1983 Reviewed In : 2018 |
Purchaser s Data Sheet for Gauge Glasses for Pressure Vessels |
|
|
IS 10843:1984 Reviewed In : 2006 |
Glossary of terms for crushers |
|
|
IS 10875:1983 Reviewed In : 2018 |
Glossary of terms and material of construction for rotary dryers and coolers |
|
|
IS 10919:1984 Reviewed In : 2018 |
Glossary of terms for electrostatic precipitators |
|
|
IS 11555 (Part 1):1986 Reviewed In : 2018 |
Designer s data sheet Part 1 Mechanical design of columns |
|
|
IS 11555 (Part 2):1986 Reviewed In : 2018 |
Designer s data sheet Part 2 Column internal |
|
|
IS 11556:1986 Reviewed In : 2018 |
Purchaser s data sheet for distillation columns |
|
|
IS 11564:1986 Reviewed In : 2018 |
Supplier s data sheet for fluid bed dryers |
|
|
IS 11565:1986 Reviewed In : 2018 |
Data sheet for industrial ovens |
|
|
IS 11572:1986 Reviewed In : 2018 |
Purchaser s data sheet for fluid bed dryers |
|
|
IS 11733:1986 Reviewed In : 2008 |
Specification For Steel Wedge Gate Globe And Check Valves For Petroleum Perochemical And Allied Industries nominal Size 50 Mm And Smaller |
|
|
IS 11792:1986 Reviewed In : 2013 |
Steel Ball Valve For The Petroleum Petrochemical And Allied Industries |
|
|
IS 12355:1988 Reviewed In : 2018 |
Supplier s data sheet for vibrators for use with bin and hopper |
|
|
IS 12356:1988 Reviewed In : 2018 |
Purchaser s Data Sheet for Clean Air Equipment Laminar Flow |
|
|
IS 12357:1988 Reviewed In : 2018 |
Supplier s data sheet for clean air equipments laminar flow |
|
|
IS 12370:1993 ISO 6718 Reviewed In : 2022 |
Bursting discs and bursting disc devices First Revision |
|
|
IS 12962:1990 Reviewed In : 2020 |
Data sheet for basic engineering plant design |
|
|
IS 12995:1990 Reviewed In : 2006 |
Process basic engineering knowhow packages - data sheet |
|
|
IS 13095:1991 |
Butterfly Valves for General Purposes First Revision |
|
|
IS 2843:1964 Reviewed In : 2011 |
Recommendation on nominal capacities for process equipment |
|
|
IS 2844:1964 Reviewed In : 2011 |
Recommendation on nominal diameter for process equipment |
|
|
IS 2845:1964 Reviewed In : 1991 |
Recommendation on nominal pressure for process equipment |
|
|
IS 2846:1964 Reviewed In : 1991 |
Recommendation on nominal temperature for process equipment |
|
|
IS 3030:1965 Reviewed In : 2011 |
Recommendation for letter symbols signs and abbreviations used in chemical engineering |
|
|
IS 3132:1965 Reviewed In : 2013 |
Recommendations for Shaft Diameters for Chemical Equipment |
|
|
IS 3223:1967 |
Graphical symbols for process measurement and control functions |
|
|
IS 4865:1968 Reviewed In : 2010 |
Welded shell flanges for non-pressure service - SEE IS 4864 TO IS 4870 |
|
|
IS 4866:1968 Reviewed In : 2010 |
Welded shell flanges for carbon steel pressure vessels and equipment - SEE IS 4864 TO IS 4870 |
|
|
IS 4867:1968 Reviewed In : 2010 |
Welded neck shell flanges for carbon steel pressure vessels and equipment - SEE IS 4864 TO IS 4870 |
|
|
IS 4868:1968 Reviewed In : 2010 |
Welded shell flanges for stainless steel pressure vessels and equipment - SEE IS 4864 TO IS 4870 |
|
|
IS 4869:1968 Reviewed In : 2010 |
Welded shell flanges with hub for stainless steel pressure vessels and equipment - SEE IS 4864 TO IS 4870 |
|
|
IS 8245:1976 Reviewed In : 2018 |
Graphical symbols for vacuum technology |
|
|
IS 8262 (Part 1):1976 ISO 2861-2-1980 Reviewed In : 2018 |
Specification for quick - Release couplings for vacuum pipelines Part 1 screwed type |
|
|
IS 8576:1977 Reviewed In : 2018 |
Purchaser s data sheet for general purpose dryers |
|
|
IS 8577:1977 Reviewed In : 2018 |
Purchaser s data sheet for rotary vacuum filters |
|
|
IS 8578:1977 Reviewed In : 2018 |
Purchaser s data sheet for pulverizers |
|
|
IS 8579:1977 Reviewed In : 2018 |
Purchaser s data sheet for crystallizers |
|
|
IS 8580:1977 Reviewed In : 2018 |
Supplier s data sheet for vibrating screens |
|
|
IS 8581:1977 Reviewed In : 2018 |
Supplier s data sheet for cooling towers for process industry |
|
|
IS 8582:1977 Reviewed In : 2018 |
Supplier s data sheet for basket type centrifuges |
|
|
IS 8658:1978 Reviewed In : 2011 |
Purchaser s Data Sheet for Vibrating Screens |
|
|
IS 8659:1978 Reviewed In : 2011 |
Purchaser s data sheet for basket type centrifuges |
|
|
IS 8660:1978 Reviewed In : 2011 |
Purchaser s Data Sheet for Vibrators for Use with Bin and Hopper |
|
|
IS 8667:1977 Reviewed In : 2018 |
Purchaser s data sheet for cooling towers for process industry |
|
|
IS 9082:1979 Reviewed In : 2011 |
Purchaser s data sheet for bursting discs and assemblies |
|
|
IS 9083:1979 Reviewed In : 2011 |
Purchaser s data sheet for rubber lined tanks |
|
|
IS 9084:1979 Reviewed In : 2011 |
Recommendation for nominal capacities for fluid storage spherical tanks |
|
|
IS 9151:1979 Reviewed In : 2011 |
Glossary of terms for process equipment |
|
|
IS 9240:1979 Reviewed In : 2011 |
Purchaser s data sheet for gas scrubber cooler or absorber |
|
|
IS 9241:1979 Reviewed In : 2006 |
Purchaser s data sheet for electrostatic precipitators |
|
|
IS 9254:1979 Reviewed In : 2006 |
Supplier s data sheet for electrostatic percipitators |
|
|
IS 9260:1979 Reviewed In : 2006 |
Supplier s Data Sheet For Crystallizer |
|
|
IS 9289:1979 Reviewed In : 2006 |
Purchaser s Data Sheet For Agitators |
|
|
IS 9539:1980 Reviewed In : 2006 |
Purchaser s data sheet for solid bowl scroll discharge centrifuges |
|
|
IS 9540:1980 Reviewed In : 2006 |
Purchaser s data sheet for plate and frame filters |
|
|
IS 9578:1980 Reviewed In : 2006 |
Purchaser s data sheet for liquid solid separation centrifuges |
|
|
IS 9579:1980 Reviewed In : 2006 |
Supplier s data sheet for hammer mills |
|
|
IS 9580:1980 Reviewed In : 2006 |
Purchaser s data sheet for hammer mills |
|
|
IS 9602:1980 Reviewed In : 2006 |
Supplier s data sheet for agitators |
|
|
IS 9693:1980 Reviewed In : 2006 |
Purchaser s Data Sheet for Spray Dryers |
|
IS/ISO 10434:2020 ISO 10434:2020 Reviewed In : 2024 |
Bolted Bonnet Steel Gate Valves for the Petroleum Petrochemical and Allied Industries |
|
|
IS 10459:2024 |
General Purpose Plug Valves - Specification First Revision |
|
|
IS 10605:1989 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Steel globe valves Flanged And Butt Welded Ends for petroleum petrochemical and allied industries - Specification First Revision |
|
|
IS 10661:2024 |
Glass Fibre Reinforced Polyester Chemical Resistant Tanks - Specification First Revision |
|
|
IS 10874:1983 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for felsite grinding media and liner stones |
|
|
IS 10989:1984 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for cast or forged steel check valves Flanged Or Butt Welding Ends for petroleum petrochemicals chemicals and allied industries |
|
|
IS 11132:2024 |
Ammonia Valves - Specification First Revision |
|
|
IS 11552:2020 Reviewed In : 2024 |
Liquid Nitrogen Vessels of Capacity up to 75 Litres Specification Second Revision |
|
|
IS 11611:2022 ISO 10497 |
Testing of Valves - Fire Type-Testing Requirements second revision |
|
|
IS 11699:1986 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specification for steel plug valves for petroleum petrochemical and allied industries |
|
|
IS 11791:1986 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specification for diaphragm type valves for general purposes |
|
|
IS 12370 (Part 2):2023 ISO 4126-2:2018 |
SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE PART 2 BURSTING DISC SAFETY DEVICES Second Revision of IS 12370 |
|
|
IS 12370 (Part 3):2023 ISO 4126-3: 2020 |
SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE PART 3 SAFETY VALVES AND BURSTING DISC SAFETY DEVICES IN COMBINATION Second Revision of IS 12370 |
|
|
IS 12370 (Part 4):2023 ISO 4126-4: 2013 |
SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE PART 4 PILOT OPERATED SAFETY VALVES Second Revision of IS 12370 |
|
|
IS 12370 (Part 5):2023 ISO 4126-5: 2013 |
SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE PART 5 CONTROLLED SAFETY PRESSURE RELIEF SYSTEMS CSPRS Second Revision of IS 12370 |
|
|
IS 12992 (Part 1):2024 |
Safety Relief Valves - Spring Loaded - Specification Part 1 Design First Revision |
|
|
IS 13187:1991 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Road tankers for light petroleum products - Specification |
|
|
IS/ISO 15761:2020 ISO 15761 Reviewed In : 2024 |
STEEL GATE GLOBE AND CHECK VALVES FOR SIZES DN 100 AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
|
|
IS/ISO 16136:2006 16136 |
Industrial valves Butterfly valves of thermoplastics materials |
|
|
IS/ISO 17292:2015 17292 |
Metal ball valves for petroleum petrochemical and allied industries First Revision |
|
|
IS/ISO 22109:2020 ISO 22109 : 2020 Reviewed In : 2024 |
Industrial Valves - Gearbox for Valves |
|
|
IS/ISO 22153:2020 SO 22153 : 2020 Reviewed In : 2024 |
Electric Actuators for Industrial Valves - General Requirements |
|
|
IS 4092 (Part 1):2025 |
Centrifuges of the Basket and Bowl and Vibrating Type for use in Industrial and Commercial Applications - Specification THIRD REVISION |
|
|
IS/ISO 4126-1:2013 ISO 4126-1:2013 |
SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE PART 1 SAFETY VALVES Adoption of ISO 4126 Part 1 |
|
|
IS 4864 (Part 4870):1968 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for shell flanges for vessels and equipment |
|
|
IS 4870:1968 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Flat gaskets for shell flanges - SEE IS 4864 TO IS 4870 |
|
|
IS 5036:1969 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for filter presses recessed plate type and plate and frame type |
|
|
IS/ISO 5210:2017 ISO 5210 : 2017 |
Industrial Valves Multi-Turn Valve Actuator Attachments |
|
|
IS/ISO 5211:2017 ISO 5211 : 2017 |
Industrial Valves Part-Turn Actuator Attachments |
|
|
IS 5428 (Part 1):2023 |
Gauge Glasses Specification Part 1 Tubular Glasses for Level Gauges Second Revision |
|
|
IS 5428 (Part 2):2023 |
Gauge Glasses - Specification Part 2 Protector Glasses for Tubular Gauge Glasses Second Revision |
|
|
IS 5428 (Part 3):2023 |
Gauge Glasses Specification Part 3 Through-Vision and Reflex Glasses Second Revision |
|
|
IS 5428 (Part 4):2023 |
Gauge Glasses - Specification Part 4 Circular Sight and Light Glasses Second Revision |
|
|
IS 5428 (Part 5):2023 |
Gauge Glasses - Specification Part 5 Port Gauge Glasses as used in Fittings for Steam Boilers Second Revision |
|
|
IS 5675:2024 |
Rotary-Disc Vacuum Filters - Specification Second Revision |
|
|
IS 6034:1989 Reviewed In : 2020 |
Insulating oil conditioning plants - Specification First Revision |
|
|
IS 6088:2024 |
Oil-to-Water Heat Exchangers for Transformers - Specification Second Revision |
|
|
IS 6202:2024 |
Flat Glass Oil Level Gauges for Oil Storage Tanks - Specification First Revision |
|
|
IS 7366:1974 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for edge type filters required for filtration of oils of straight mineral type |
|
|
IS 8262 (Part 2):1976 ISO 2861-1 Reviewed In : 2021 |
Specification for qusck - Release couplings for vacuum pipelines Part 2 clamped type |
|
|
IS 8280:2022 ISO 27894: 2009 |
Vacuum Technology - Vacuum Gauges - Specifications for Hot Cathode Ionization Gauges first revision |
|
|
IS 8288:1976 ISO 3669 Reviewed In : 2021 |
Specification for bakeable flanges |
|
|
IS 9618:1980 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for road tankers for liquefied petroleum gas |
|
|
IS 9705 (Part 1):1980 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for quick release coupling for vacuum pipe lines Part 1 screwed couplings type b |
|
|
IS 9890:1981 Reviewed In : 2024 |
Specification for general purpose ball valves |