Programme of work

BUREAU OF INDIAN STANDARDS

Petroleum, Coal and Related Products Department

Programme of Work

PCD29 : Methods of Test for Rubber and Rubber Products

Scope : To formulate Indian Standards for methods of sampling and test of rubber and rubber products.
Liaison :

ISO/TC 45/SC 2 - Testing and analysis - Participating (P)
ISO/TC 45/SC 2/WG 1 - Physical properties
ISO/TC 45/SC 2/WG 2 - Visco-elastic properties
ISO/TC 45/SC 2/WG 3 - Degradation tests
ISO/TC 45/SC 2/WG 4 - Application of statistical methods
ISO/TC 45/SC 2/WG 5 - Chemical tests

Published Standards

SI. No.	IS No.	Title	Reaffirmation Details	No. of Amendments	Degree of Equivalence
1.	IS 10016 (Part 2):1984	Methods of test for polybutadiene rubbers: Part 2 determination of ash	January, 2019	-	Indigenous
2.	IS 10016 (Part 4):1984	Methods of test for polybutadiene rubbers: Part 4 determination of cis, trans and vinyl structure	July, 2024	-	Indigenous
3.	IS 10016 (Part 6):2000	Methods of test for polybutadiene rubbers: Part 6 evaluation of vulcanization characteristics of polybutadiene rubbers (Br : 2)	July, 2024	-	Not Equivalent
4.	IS 10016 (Part 1):1981 Reaffirmed but not taken up for revision	Methods of test for polybutadiene rubbers: Part 1 method of taking out test portions from sample bales	January, 2019	-	Indigenous
5.	IS 10016 (Part 5):1981 Reaffirmed but not taken up for revision	Methods of test for polybutadiene rubbers: Part 5 determination of gel content	January, 2019	-	Indigenous
6.	IS 11720 (Part 11):2001 ISO 7781	Methods of test for synthetic rubber: Part 11 rubber, raw styrene - Butadiene - Determination of soap and organic - Acid content	July, 2024	-	Identical under dual numbering
7.	IS 11720 (Part 13):2001	Methods of test for synthetic rubber: Part 13 determination of gel content	July, 2024	-	Not Equivalent
8.	IS 11720 (Part 3):1993	Methods of test for synthetic rubber: Part 3 determination of mooney viscosity	July, 2024	-	Not Equivalent
9.	IS 11720 (Part 4):1993	Methods of test for synthetic rubber: Part 4 determination of volatile matter	July, 2024	-	Not Equivalent
10.	IS 11720 (Part 5):1993	Methods of test for synthetic rubber: Part 5 determination of ash	July, 2024	-	Not Equivalent
11.	IS 11720 (Part 6):2001	Methods of test for synthetic rubber: Part 6 determination of solvent extract	July, 2024	-	Not Equivalent
12.	IS 11720 (Part 1):1986 Reaffirmed but not taken up for revision	Methods of test for synthetic rubber: Part 1 determination of antioxidants	September, 2020	1	Not Equivalent
13.	IS 13867:2021	Rubber - General Procedures for Preparing and Conditioning Test Pieces for Physical Test Methods ( First Revision )		-	Identical under dual numbering
14.	IS 14788:2025 ISO 2322 : 2023	STYRENE-BUTADIENE RUBBER (SBR) EMULSION AND SOLUTION-POLYMERIZED TYPES -EVALUATION PROCEDURES ( Second Revision )		-	Identical under dual numbering
15.	IS 14794:2022 ISO 2302:2020	ISOBUTENE-ISOPRENE RUBBER IIR EVALUATION PROCEDURES Third Revision		-	Identical under dual numbering
16.	IS 15076:2018 ISO 2475:2011	Chloroprene Rubber CR - General Purpose Types Evaluation Procedure First Revision	March, 2024	-	Identical under dual numbering
17.	IS 16705:2025 ISO/TS 16095 : 2021	RECLAIMED RUBBER DERIVED FROM PRODUCTS CONTAINING MAINLY NATURAL RUBBER EVALUATION PROCEDURE (First Revision)		-	Identical under dual numbering
18.	IS 16713:2025 ISO/TS 16096 : 2021	RECLAIMED ISOBUTENE-ISOPRENE IIR RUBBER EVALUATION PROCEDURE ( First Revision)		-	Identical under dual numbering
19.	IS 16751:2018 ISO 9691 : 1992	Rubber - Recommendations for the workmanship of pipe joint rings - Description and classification of imperfections	July, 2024	-	Identical under dual numbering
20.	IS 16752:2018 ISO 3302-1 : 2014	Rubber - Tolerances for products - Dimensional tolerances	July, 2024	-	Identical under dual numbering
21.	IS 16774:2018 ISO 2439 : 2008	Flexible cellular polymeric materials - Determination of hardness (Indentation Technique)	July, 2024	-	Identical under dual numbering
22.	IS 16801:2018 ISO 4650 : 2012	Rubber - Identification - Infrared spectrometric methods	March, 2024	-	Identical under dual numbering
23.	IS 16848 (Part 1/Sec 1):2024 6502-1: 2018	Rubberï¿½ Methods of Test Part 1 Measurement of vulcanization characteristics using curemeters Section 1 Introduction		-	Identical under dual numbering
24.	IS 16848 (Part 1/Sec 2):2024 6502-2:2018	Rubberï¿½ Methods of Test Part 1 Measurement of vulcanization characteristics using curemeters Section 2 Oscillating disc curemeter		-	Identical under dual numbering
25.	IS 16848 (Part 1/Sec 3):2024 ISO 6502-3:2023	Rubber ï¿½ Methods of Test Part 1 Measurement of vulcanization characteristics using curemeters Section 3 Rotorless curemeter		-	Identical under dual numbering
26.	IS 16848 (Part 2):2024	Rubber ï¿½ Methods of Test Part 2 Determination of styrene content ï¿½ Nitration method		-	Indigenous
27.	IS 17115:2019 ISO 3385 : 2014	Flexible cellular polymeric materials - Determination of fatigue by constant - Load pounding	March, 2024	-	Identical under dual numbering
28.	IS 17159:2019 ISO 6605 : 2017	Hydraulic fluid power - Hoses and hose assemblies - Test methods	March, 2024	-	Identical under dual numbering
29.	IS 17160:2019 ISO 9298 : 2017	Rubber compounding ingredients - Zinc oxide - Test methods	March, 2024	-	Identical under dual numbering
30.	IS 3400 (Part 11):2021	Methods of Test for Vulcanized Rubber Part 11 Determination of Rebound Resilience (Second Revision)	-	-	Not Equivalent
31.	IS 3400:2021 ISO 37 : 2017	Methods of Test for Vulcanized Rubber Part 1 Tensile Stress-Strain Properties		-	Identical under dual numbering
32.	IS 3400 (Part 16):1974 Reaffirmed but not taken up for revision	Methods of test for vulcanized rubbers: Part xvi measurement of cut growth of rubber by the use of the ross flexing machine	July, 2024	-	Not Equivalent
33.	IS 3400 (Part 19):2020 ISO 2782-1 : 2016	Methods of Test for Vulcanized Rubbers Part 19 Permeability to Gases ( Constant Volume Method ) ( First Revision )	July, 2024	-	Identical under dual numbering
34.	IS 3400 (Part 21):2020 ISO 2782-2 : 2018	Methods of Test for Vulcanized Rubbers Part 21 Permeability to Gases — Constant Pressure Method ( First Revision )	July, 2024	-	Identical under dual numbering
35.	IS 3400 (Part 22):1984 Reaffirmed but not taken up for revision	Methods of test for vulcanized rubber: Part 22 chemical analysis	January, 2019	-	Not Equivalent
36.	IS 3400 (Part 4):2012 ISO 188 : 2011	Methods of test for vulcanized rubber: Part 4 accelerated ageing and heat resistance (Third Revision)	July, 2024	-	Identical under dual numbering
37.	IS 3400 (Part 6):2018 ISO 1817 : 2015	Methods of Test for Vulcanized Rubbers Part 6 Determination of the Effect of Liquids (Fourth Revision)	July, 2024	-	Identical under dual numbering
38.	IS 3400 (Part 9):2020 ISO 2781 : 2018	Methods of Test for Vulcanized Rubber Part 9 Rubber, Vulcanized or Thermoplastic — Determination of Density ( Fourth Revision )	July, 2024	-	Identical under dual numbering
39.	IS 3400 (Part 2):2023 ISO 48-2:2018	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 2 HARDNESS BETWEEN 10 IRHD AND 100 IRHD ( Fifth Revision )		-	Identical under dual numbering
40.	IS 3400 (Part 13):2021 ISO 2285 :2013	Methods of test for vulcanized rubbers: Part 13 Tension Set Second Revision		-	Identical under dual numbering
41.	IS 3400 (Part 27):2019 ISO 1431-3 : 2007	Methods of test for vulcanized rubbers: Part 27 resistance to ozone cracking - Reference and alternative methods for determining the ozone concentration in laboratory test chambers	March, 2024	-	Identical under dual numbering
42.	IS 3400 (Part 2/Sec 6):2023 ISO 48-6:2018	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 6 APPARENT HARDNESS OF RUBBER-COVERED ROLLERS BY IRHD METHOD		-	Identical under dual numbering
43.	IS 3400 (Part 23/Sec 2):2018 ISO 7619-2 : 2010	Methods of test for vulcanized rubbers: Part 23 rubber - Determination of indentation hardness by means of pocket hardness meters section 2 irhd pocket meter method (First Revision)		-	Identical under dual numbering
44.	IS 3400 (Part 14/Sec 3):2020 ISO 5600 : 2017	Methods of Test for Vulcanized Rubbers Part 14 Adhesion of Rubber to Rigid Material Section 3 Using conical shaped parts ( Second Revision )	July, 2024	-	Identical under dual numbering
45.	IS 3400 (Part 2/Sec 7):2022 ISO 48-7:2018	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 7 APPARENT HARDNESS OF RUBBER-COVERED ROLLERS BY SHORE-TYPE DUROMETER METHOD		-	Identical under dual numbering
46.	IS 3400 (Part 10/Sec 1):2022 ISO 815-1:2019	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 10 COMPRESSION SET SECTION 1 AT AMBIENT OR ELEVATED TEMPERATURES ( Third Revision )		-	Identical under dual numbering
47.	IS 3400 (Part 12):2022 ISO 34-1:2015	Methods of test for vulcanized rubbers: Part 12 Tear strength-crescent test piece First Revision		-	Identical under dual numbering
48.	IS 3400 (Part 29):2022 ISO 6914:2021	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 29 DETERMINATION OF AGEING CHARACTERISTICS BY MEASUREMENT OF STRESS RELAXATION IN TENSION ( First Revision )		-	Identical under dual numbering
49.	IS 3400 (Part 2/Sec 1):2022 ISO 48-1:2018	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 1 INTRODUCTION AND GUIDANCE		-	Identical under dual numbering
50.	IS 3400 (Part 26):2025 ISO 1827 : 2022	Vulcanized Rubber - Methods of Test Part 26 Determination of Shear Modulus and Adhesion to Rigid Plates - Quadruple-Shear Methods ( First Revision )		-	Identical under dual numbering
51.	IS 3400 (Part 5):2022 ISO 36:2020	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 5 ADHESION OF RUBBERS TO TEXTILE FABRICS ( Fourth Revision )		-	Identical under dual numbering
52.	IS 3400 (Part 10/Sec 2):2022 ISO 815-2:2019	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 10 COMPRESSION SET SECTION 2 AT LOW TEMPERATURES ( Third Revision )		-	Identical under dual numbering
53.	IS 3400 (Part 28):2022 ISO 3384-1:2019	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 28 DETERMINATION OF STRESS RELAXATION IN COMPRESSION ï¿½ TESTING AT CONSTANT TEMPERATURE ( First Revision )		-	Identical under dual numbering
54.	IS 3400 (Part 25):2022 ISO 812 : 2017	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 25 DETERMINATION OF LOW-TEMPERATURE BRITTLENESS ( First Revision )		-	Identical under dual numbering
55.	IS 3400 (Part 2/Sec 8):2022 ISO 48-8:2018	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 8 APPARENT HARDNESS OF RUBBER-COVERED ROLLERS BY PUSEY AND JONES METHOD		-	Identical under dual numbering
56.	IS 3400 (Part 2/Sec 9):2022 ISO 48-9:2018	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 9 CALIBRATION AND VERIFICATION OF HARDNESS TESTERS		-	Identical under dual numbering
57.	IS 3400 (Part 2/Sec 5):2022 ISO 48-5:2018	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 5 INDENTATION HARDNESS BY IRHD POCKET METER METHOD ( Second Revision )		-	Identical under dual numbering
58.	IS 3400 (Part 20):2025 ISO 1431-1 : 2022	Vulcanized Rubber - Methods of Test Part 20 Resistance to ozone cracking - Static strain test (Third Revision) )		-	Identical under dual numbering
59.	IS 3400 (Part 2/Sec 4):2022 ISO 48-4:2018	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 4 INDENTATION HARDNESS BY DUROMETER METHOD (SHORE HARDNESS) ( Second Revision )		-	Identical under dual numbering
60.	IS 3400 (Part 2/Sec 3):2022 ISO 48-3:2018	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 3 DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS (VLRH) SCALE		-	Identical under dual numbering
61.	IS 3400 (Part 15):2022 ISO 14309:2019	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 15 DETERMINATION OF VOLUME AND/OR SURFACE RESISTIVITY ( First Revision )		-	Identical under dual numbering
62.	IS 3400 (Part 7):2021 ISO 132 : 2017	Methods of Test for Vulcanized Rubber Part 7: Determination of flex cracking and crack growth De Mattia		-	Identical under dual numbering
63.	IS 3400 (Part 18):2021 ISO 1432 : 2013	Methods of Test for Vulcanized Rubbers - Part 18 : Stiffness at Low Temperature Gehman Test( Second Revision )		-	Identical under dual numbering
64.	IS 3400 (Part 24):2021 ISO 8033 : 2016	Methods for Test for Volcanized Rubbers - Part 24 Rubber and Plastics Hose - Determination of Adhesion Between Components		-	Identical under dual numbering
65.	IS 3400 (Part 3):2021 ISO 4649:2010	Methods of Test for Vulcanized Rubbers Part 3 Abrasion Resistance using a Rotating Cylindrical Drum Device ( Third Revision )		-	Identical under dual numbering
66.	IS 3400 (Part 14/Sec 1):2021 ISO 813:2016	Methods of test for Vulcanized Rubbers: Part 14 Adhesion of Rubber to Rigid Substrate Section 1 90 peel method Second Revision		-	Identical under dual numbering
67.	IS 3400 (Part 14/Sec 2):2021 ISO 814 :2017	Methods of test for Vulcanized Rubbers: Part 14 Adhesion of Rubber to Metal Section 2 Two-plate method Second Revision		-	Identical under dual numbering
68.	IS 3660 (Part 1):1999	Methods of test for natural rubber - Part 1 : determination of dirt (Third Revision)	July, 2024	2	Not Equivalent
69.	IS 3660 (Part 10):2000	Methods of test for natural rubber: Part 10 determination of nitrogen content [nr:11] (First Revision)	July, 2024	-	Not Equivalent
70.	IS 3660 (Part 2):1985	Methods of test for natural rubber - Part 2 : determination of volatile matter (Second Revision)	July, 2024	1	Not Equivalent
71.	IS 3660 (Part 4):2017 ISO 8053 : 1995	Methods of test for natural rubber: Part 4 determination of total copper - Photometric method [ nr : 4 ] (Third Revision)	July, 2024	-	Identical under dual numbering
72.	IS 3660 (Part 5):1989	Methods of test for natural rubber: Part 5 determination of manganese (Nr:5) (Second Revision)	July, 2024	-	Not Equivalent
73.	IS 3660 (Part 6):1988 Reaffirmed but not taken up for revision	Methods of test for natual rubber: Part 6 determination of rubber hydrocarbon [nr:7} (Second Revision)	January, 2019	-	Not Equivalent
74.	IS 3660 (Part 9):2016 ISO 1407 : 2011	Methods of test for natural rubber: Part 9 determination of solvent extract [ nr : 10 ] (Second Revision)	April, 2021	-	Identical under dual numbering
75.	IS 3660 (Part 11):2021 ISO 2007:2007	Methods of Test for Natural Rubber - Part 11 : Determination of Plasticity		-	Identical under dual numbering
76.	IS 3660 (Part 7):2013 ISO289-1:2005	Methods of Test for Natural Rubber Part 7 : Determination of Mooney Viscosity	July, 2024	-	Identical under dual numbering
77.	IS 3660 (Part 8):2023 ISO 2393:2014	METHODS OF TEST FOR NATURAL RUBBER PART 8 RUBBER TEST MIXES PREPARATION MIXING AND VULCANIZATION EQUIPMENT AND PROCEDURES NR : 9 Third Revision of IS 3600 Part 8		-	Identical under dual numbering
78.	IS 3660 (Part 13):2023 ISO 4660:2020	METHODS OF TEST FOR NATURAL RUBBER PART 13 DETERMINATION OF COLOUR NR : 14 Second Revision of IS3660 Part 13		-	Identical under dual numbering
79.	IS 3660 (Part 12):2022 ISO 2930:2017	METHODS OF TEST FOR NATURAL RUBBER PART 12 DETERMINATION OF PLASTICITY RETENTION INDEX PRI NR : 13 Third Revision		-	Identical under dual numbering
80.	IS 3708 (Part 2):2024 2005:2014	NATURAL RUBBER LATEX- METHODS OF TEST PART 2 DETERMINATION OF SLUDGE CONTENT ( Second Revision )		-	Identical under dual numbering
81.	IS 3708 (Part 11):2001	Methods of test for natural rubber latex: Part 11 determination of magnesium (Direct Titration Method) [nrl:18] (Second Revision)	July, 2024	-	Indigenous
82.	IS 3708 (Part 3):2018 ISO 705 : 2015	Methods of test for natural rubber latex: Part 3 determination of density (Second Revision)	July, 2024	-	Identical under dual numbering
83.	IS 3708 (Part 8):2018 ISO 1656 : 2014	Methods of test for natural rubber latex: Part 8 rubber, raw natural and rubber latex, natural - Determination of nitrogen content (Third Revision)	July, 2024	-	Identical under dual numbering
84.	IS 3708 (Part 9):2018 ISO 247 : 2006	Methods of test for natural rubber latex: Part 9 determination of total ash (Third Revision)	July, 2024	-	Identical under dual numbering
85.	IS 3708 (Part 5):2022 ISO 127:2018	METHODS OF TEST FOR NATURAL RUBBER LATEX PART 5 DETERMINATION OF KOH NUMBER Fourth Revision		-	Identical under dual numbering
86.	IS 3708 (Part 10):2023 ISO 1802:1992	METHODS OF TEST FOR NATURAL RUBBER LATEX PART 10 NATURAL RUBBER LATEX CONCENTRATE DETERMINATION OF BORIC ACID CONTENT		-	Identical under dual numbering
87.	IS 3708 (Part 4):2023 ISO 125:2020	METHODS OF TEST FOR NATURAL RUBBER LATEX PART 4 NATURAL RUBBER LATEX CONCENTRATE DETERMINATION OF ALKALINITY Fourth Revision		-	Identical under dual numbering
88.	IS 3708 (Part 7):2022 ISO 506:2020	METHODS OF TEST FOR NATURAL RUBBER LATEX PART 7 DETERMINATION OF VOLATILE FATTY ACID NUMBER Third Revision		-	Identical under dual numbering
89.	IS 3708 (Part 1):2013 ISO 126:2005	Methods of test for natural rubber latex: Part 1 determination of dry rubber content [nrl : 1] (Second Revision)	February, 2024	-	Identical under dual numbering
90.	IS 3708 (Part 6):2024 ISO 35:2004	NATURAL RUBBER LATEX- Methods of Test PART 6 DETERMINATION OF MECHANICAL STABILITY (second revision)		-	Identical under dual numbering
91.	IS 433 (Part 7):2022 ISO 8033:2016	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 7 RUBBER AND PLASTICS HOSES DETERMINATION OF ADHESION BETWEEN COMPONENTS		-	Identical under dual numbering
92.	IS 443 (Part 8):2023 4671:2022	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 8 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES METHODS OF MEASUREMENT OF THE DIMENSIONS OF HOSES AND THE LENGTHS OF HOSE ASSEMBLIES ISO 4671 : 2022 IDT		-	Identical under dual numbering
93.	IS 443 (Part 10):2023 10619-1:2017	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 10 RUBBER AND PLASTICS HOSES AND TUBING MEASUREMENT OF FLEXIBILITY AND STIFFNESS BENDING TESTS AT AMBIENT TEMPERATURE ISO 10619-1 : 2017 IDT		-	Identical under dual numbering
94.	IS 443 (Part 2):2023 6801:2021	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 2 RUBBER AND PLASTICS HOSES DETERMINATION OF VOLUMETRIC EXPANSION		-	Identical under dual numbering
95.	IS 443 (Part 3):2023 1402:2021	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 3 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES HYDROSTATIC TESTING		-	Identical under dual numbering
96.	IS 443 (Part 5):2022 7662:1988	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 5 RUBBER AND PLASTICS HOSES DETERMINATION OF ABRASION OF LINING First Revision		-	Identical under dual numbering
97.	IS 443 (Part 9):2023 7233:2021	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 9 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES DETERMINATION OF RESISTANCE TO VACUUM ISO 7233 : 2021 IDT		-	Identical under dual numbering
98.	IS 443 (Part 11):2023 10619-2:2021	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 11 RUBBER AND PLASTICS HOSES AND TUBING MEASUREMENT OF FLEXIBILITY AND STIFFNESS BENDING TESTS AT SUB-AMBIENT TEMPERATURES ISO 10619-2 : 2021 IDT		-	Identical under dual numbering
99.	IS 443 (Part 4):2022 ISO 8031:2020	METHODS OF TEST FOR RUBBER AND PLASTICS ï¿½ TUBING, HOSES AND HOSE ASSEMBLIES PART 4 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES ï¿½ DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY ( Fourth Revision )		-	Identical under dual numbering
100.	IS 443:2022 ISO 7326:2016	METHODS OF TEST FOR RUBBER AND PLASTICS ï¿½ TUBING, HOSES AND HOSE ASSEMBLIES PART 1 RUBBER AND PLASTICS HOSES ï¿½ ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS ( Fourth Revision )		-	Identical under dual numbering
101.	IS 443 (Part 6):2022 6803 : 2017	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 6 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES HYDRAULIC PRESSURE IMPULSE TEST WITHOUT FLEXING First Revision		-	Identical under dual numbering
102.	IS 4511 (Part 4):2023 ISO 3136:1983	Methods of test for Styrene Butadiene Rubber SBR Latices Part 4 Determination of bound Styrene		-	Identical under dual numbering
103.	IS 4511 (Part 1):1986 Decision taken to Reaffirm and Archive	Methods of test for styrene - Butadiene rubber (Sbr) latices: Part 1 determination of dry polymer content sbrl : 1 (First Revision)	May, 2025	-	Indigenous
104.	IS 4511 (Part 2):1986 Reaffirmed but not taken up for revision	Methods of test for styrene - Butadiene rubber (Sbr) latices: Part 2 determination of density sbrl:6 (First Revision)	July, 2024	-	Indigenous
105.	IS 4511 (Part 3):1987 Decision taken to Reaffirm and Archive	Methods of test for styrene - Butadiene rubber (Sbr) latices: Part 3 determination of volatile unsaturates [sbrl:8] (First Revision)	May, 2025	-	Not Equivalent
106.	IS 4511 (Part 5):2005 ISO 7781	Method of test for styrene - Butadiene rubber (Sbr), latices: Part 5 determination of soap and organic - Acid content (Second Revision)	July, 2024	-	Identical under dual numbering
107.	IS 4511 (Part 6):1987	Methods of test for styrene - Butadiene rubber (Sbr) latices: Part 6 determination of high - Speed mechanical stability	July, 2024	-	Not Equivalent
108.	IS 4518 (Part 4/Sec 1):2024 ISO 21561-1:2015	STYRENE ï¿½ BUTADIENE RUBBER ï¿½ METHODS OF TEST PART 4 DETERMINATION OF THE MICROSTRUCTURE OF SOLUTION-POLYMERIZED SBR Section 1 1H-NMR AND IR WITH CAST-FILM METHOD		-	Identical under dual numbering
109.	IS 4518 (Part 1):1967 Reaffirmed but not taken up for revision	Methods of tests for styrene - Butadiene rubbers (Sbr): Part 1 determlNatlOn of volatile matter, total ash, organic acid, soap, antioxidants, bound styrene and mooney viscosity	January, 2019	-	Not Equivalent
110.	IS 4518 (Part 2):1971 Reaffirmed but not taken up for revision	Methods of test for styrene - Butadiene rubbers: Part ii determination of solvent extract and oil content	January, 2019	-	Not Equivalent
111.	IS 4518 (Part 3):2024 ISO 2453 : 2020	STYRENE ï¿½ BUTADIENE RUBBERS ï¿½ METHODS OF TEST PART 3 DETERMINATION OF BOUND STYRENE CONTENT ï¿½ REFRACTIVE INDEX METHOD		-	Identical under dual numbering
112.	IS 4518 (Part 4/Sec 2):2024 ISO 21561-2:2016	STYRENE ï¿½ BUTADIENE RUBBERS ï¿½ METHODS OF TEST PART 4 DETERMINATION OF THE MICROSTRUCTURE OF SOLUTION-POLYMERIZED SBR Section 2 FTIR WITH ATR METHOD		-	Identical under dual numbering
113.	IS 5599:1999 Reaffirmed but not taken up for revision	Rubber - Raw,naturaland synthetic - Methods for sampling and sample preparation (First Revision)	January, 2019	-	Not Equivalent
114.	IS 6306:1971	Methods of test for reclaimed rubber	May, 2025	2	Indigenous
115.	IS 7086 (Part 1):1973 Reaffirmed but not taken up for revision	Methods of sampling and test for rubber compounding ingredients,: Part 1	July, 2024	1	Indigenous
116.	IS 7498:1985 Reaffirmed but not taken up for revision	Methods of sampling and test for carbon black (First Revision)	July, 2024	-	Indigenous
117.	IS 7499:2023 1658:2022	NATURAL RUBBER NR - EVALUATION PROCEDURE (Third Revision)		-	Identical under dual numbering
118.	IS 7888:1976 Reaffirmed but not taken up for revision	Methods of test for flexible polyurethane foam	January, 2019	-	Not Equivalent
119.	IS 8683:1977 Reaffirmed but not taken up for revision	Methods of test for raw acrylonitrile butadiene rubber	January, 2019	-	Not Equivalent
120.	IS 9316 (Part 3):1987	Methods of test for rubber latex: Part 3 determination of coagulum content (Sieve Residue) [rl:3] (First Revision)	July, 2024	1	Not Equivalent
121.	IS 9316 (Part 6):2017 ISO 976 : 2013	Methods of test for rubber latex: Part 6 determination of pH [ rl : 6 ] (Second Revision)	July, 2024	-	Identical under dual numbering
122.	IS 9316 (Part 7):1987	Methods of test for rubber latex: Part 7 determination of total copper [rl:7]	July, 2024	-	Not Equivalent
123.	IS 9316 (Part 9):1987	Methods of test for rubber latex: Part 9 determination of total manganese [rl:9]	July, 2024	-	Not Equivalent
124.	IS 9316 (Part 5):2013 ISO 123:2001	Methods of test for rubber latex: Part 5 drawing of samples [rl : 5] (Second Revision)	February, 2024	-	Identical under dual numbering
125.	IS 9316 (Part 4):2023 124:2014	METHODS OF TEST FOR RUBBER LATEX PART 4 DETERMINATION OF TOTAL SOLIDS CONTENT RL : 4 ISO 124:2014 IDT		-	Identical under dual numbering
126.	IS 9316 (Part 2):2024 ISO 1652:2011	RUBBER LATEX ï¿½ METHODS OF TEST PART 2 DETERMINATION OF VISCOSITY (Second Revision )		-	Identical under dual numbering
127.	IS 9316 (Part 1):2023 1409:2020	METHODS OF TEST FOR RUBBER LATEX PART 1 DETERMINATION OF SURFACE TENSION RL : 1 ISO 1409:2020 IDT		-	Identical under dual numbering
128.	IS 9316 (Part 8):2023 1657:1986	METHODS OF TEST FOR RUBBER LATEX PART 8 DETERMINATION OF TOTAL IRON ISO 1657:1986 IDT		-	Identical under dual numbering

Standards Under Develpoment

Projects Approved

SI. No.	Doc No	TITLE
No Records Found

Preliminary Draft Standards

SI. No.	Doc No	TITLE
No Records Found

Drafts Standards in WC Stage

SI. No.	Doc No	TITLE
No Records Found

Draft Standards Completed WC Stage

SI. No.	Doc No	TITLE
No Records Found

Finalized Draft Indian Standard

SI. No.	Doc No	TITLE
No Records Found

Finalized Draft Indian Standards under Print

SI. No.	Doc No	TITLE
1	PCD 29 (02629) Revision of: IS 443:2017	Rubber and Plastics Hoses and Hose Assemblies - Determination of Electrical Resistance and Conductivity IS 443 Part 4
2	PCD 29 (02814) Revision of: IS 7016:1981	Methods of test for coated and treated fabrics Part 3 Determination of tear resistance Section 1 Constant rate of tear methods
3	PCD 29 (02815)	Methods of test for coated and treated fabrics Part 3 Determination of tear resistance Section 2 Ballistic pendulum method
4	PCD 29 (02612) Revision of: IS 4511:2005	Methods of Test for Styrene-butadiene Rubber SBR Latices - Part 5 Determination of Soap and organic acid Content
5	PCD 29 (02625) Revision of: IS 443:2017	METHODS OF TEST FOR RUBBER AND PLASTICS HOSES PART 2 DETERMINATION OF VOLUMETRIC EXPANSION IS 443 PART2
6	PCD 29 (02626) Revision of: IS 443:2017	METHODS OF TEST FOR RUBBER AND PLASTICS HOSES PART 1 ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS IS 443 PART 1
7	PCD 29 (02706) Revision of: IS 3660:2016	Methods of Test for Natural Rubber - Part 9 Determination of Solvent Extract
8	PCD 29 (02707) Revision of: IS 3660:2017	Methods of Test for Natural Rubber - Part 12 Determination of Plasticity Retention Index PRI
9	PCD 29 (02708) Revision of: IS 3660:2017	Methods of Test for Natural Rubber - Part 11 Determination of Plasticity
10	PCD 29 (02710) Revision of: IS 3660:2017	Methods of Test for Natural Rubber - Part 4 Determination of Total Copper
11	PCD 29 (02716) Revision of: IS 9316:2017	Methods of Test for Rubber Latex - Part 6 Determination of pH
12	PCD 29 (02807) Revision of: IS 3708:2016	Methods of Test for Natural Rubber Latex - Part 4 Natural rubber latex concentrate - Determination of alkalinity
13	PCD 29 (02808) Revision of: IS 7016:2015	Methods of test for coated and treated fabrics Part 2 Determination of breaking strength and extension at break
14	PCD 29 (02809) Revision of: IS 7016:1982	Methods of Test for Coated and Treated Fabrics - Part I Determination of Roll Characteristics Section-1
15	PCD 29 (02812) Revision of: IS 7016:1984	Methods of Test for Coated and Treated Fabrics - Part 6 Determination of Bursting Strength Section 1
16	PCD 29 (02813) Revision of: IS 7016:1981	Methods of Test for Coated and Treated Fabrics - Part III Determination of Tear Strength Section 2
17	PCD 29 (10297) Revision of: IS 3708:2018	Methods of Test for Natural Rubber Latex Part 5 Determination of KOH-number
18	PCD 29 (10298) Revision of: IS 15076:2002	Chloroprene Rubber CR - General Purpose Types Evaluation Procedure First Revision
19	PCD 29 (10443)	Methods of Test for Rubber and Plastics Hoses Part 5 Determination of abrasion of lining
20	PCD 29 (10444)	Rubber Identification Infrared spectrometric methods
21	PCD 29 (10445)	METHODS OF TEST FOR VULCANIZED RUBBERS PART 25 DETERMINATION OF LOW-TEMPERATURE BRITTLENESS
22	PCD 29 (10447)	Rubber Guide to the use of curemeters
23	PCD 29 (10449)	Flexible cellular polymeric materials Determination of fatigue by constant-load pounding
24	PCD 29 (10450) Revision of: IS 3400:2018	Methods of Test for Vulcanized Rubbers Part 3 Determination of the Effect of Liquids Fourth Revision
25	PCD 29 (10490) Revision of: IS 14788:2018	Styrene-butadiene Rubber SBR - Emulsion- and Solution-polymerized Types - Evaluation Procedures first revision
26	PCD 29 (10491) Revision of: IS 14794:2018	ISOBUTENE-ISOPRENE RUBBER IIR EVALUATION PROCEDURES Second Revision
27	PCD 29 (10493) Revision of: IS 3400:2018	Methods of Test for Vulcanized Rubbers Part 6 Determination of the Effect of Liquids Fourth Revision
28	PCD 29 (10501) Revision of: IS 3400:2018	METHODS OF TEST FOR VULCANIZED RUBBERS PART 20 RESISTANCE TO OZONE CRACKING - STATIC STRAIN TEST Second Revision
29	PCD 29 (10504) Revision of: IS 3400:2002	Methods of Test for Vulcanized Rubbers - Part 23 Rubber - Determination of Indentation Hardness by Means of Pocket Hardness Meters- Sec 1 Durometer method Shore hardness First Revision
30	PCD 29 (10505) Revision of: IS 3400:2002	Methods of Test for Vulcanized Rubbers - Part 23 Rubber - Determination of Indentation Hardness by Means of Pocket Hardness Meters- Sec 2 IRHD pocket meter method first revision
31	PCD 29 (10506) Revision of: IS 3708:2018	METHODS OF TEST FOR NATURAL RUBBER LATEX PART 9 DETERMINATION OF DENSITY Third Revision
32	PCD 29 (10507) Revision of: IS 3708:2018	METHODS OF TEST FOR NATURAL RUBBER LATEX PART 8 RUBBER RAW NATURAL AND RUBBER LATEX NATURAL DETERMINATION OF NITROGEN CONTENT Third Revision
33	PCD 29 (10508) Revision of: IS 3660:2013	Draft Indian Standard METHODS OF TEST FOR NATURAL RUBBER PART 7 DETERMINATION OF MOONEY VISCOSITY NR 8 Fourth Revision
34	PCD 29 (10529) Revision of: IS 3708:2018	METHODS OF TEST FOR NATURAL RUBBER LATEX PART 9 DETERMINATION OF TOTAL ASH Third Revision
35	PCD 29 (10576)	Reclaimed rubber derived from products containing mainly natural rubber Evaluation procedure
36	PCD 29 (10577)	Reclaimed isobutene-isoprene IIR rubber Evaluation procedure
37	PCD 29 (11600)	Flexible cellular polymeric materials Determination of hardness indentation technique
38	PCD 29 (11604)	Rubber Tolerances for products Dimensional tolerances
39	PCD 29 (11606)	METHODS OF TEST FOR VULCANIZED RUBBERS PART 28 Rubber Vulcanized or Thermoplastic Determination of stress relaxation in compression Testing at constant temperature
40	PCD 29 (11607)	METHODS OF TEST FOR VULCANIZED RUBBERS PART 29 Rubber Vulcanized or Thermoplastic Determination of ageing characteristics by measurement of stress relaxation in tension
41	PCD 29 (11609)	Rubber - Recommendations for the workmanship of pipe joint rings Description and classification of imperfections
42	PCD 29 (12876)	Thermoplastic elastomers Nomenclature and abbreviated terms
43	PCD 29 (12880)	METHODS OF TEST FOR VULCANIZED RUBBERS PART 26 DETERMINATION OF SHEAR MODULUS AND ADHESION TO RIGID PLATES QUADRUPLE-SHEAR METHODS
44	PCD 29 (13696)	Hydraulic fluid power -- Hoses and hose assemblies -- Test methods
45	PCD 29 (13697)	Methods of Test for Rubber and Plastics Hoses Part 5 Hydraulic pressure impulse test without flexing
46	PCD 29 (13698)	Methods of Test for Vulcanized Rubbers Part 27 Resistance to ozone cracking-Reference and Alternative Methods for Determining the Ozone Concentration in Laboratory Test Chambers
47	PCD 29 (13699)	Methods of Test For Coated and Treated Fabrics Part 5 Rubber- Or Plastics - Coated Fabrics Determination of Coating Adhesion Third Revision
48	PCD 29 (13700)	Methods of Test for Coated and Treated Fabrics Part 15 Determination of abrasion resistance using Taber abrader
49	PCD 29 (13701)	Rubber compounding ingredients Zinc oxide Test methods
50	PCD 29 (13702)	Methods of Test For Coated And Treated Fabrics Part 1 Determination of Roll Characteristics Section 2 Methods for determination of total mass per unit area mass per unit area of coating and mass per unit area of substrate
51	PCD 29 (13703)	Methods of Test for Coated and Treated Fabrics Part 1 Determination of Roll Characteristics Section 3 Method for determination of thickness
52	PCD 29 (13789) Revision of: IS 3400:2020	Methods of test For Vulcanized Rubbers Part 5 Adhesion of Rubbers to Textile Fabrics Third Revision
53	PCD 29 (13790) Revision of: IS 3400:2020	Methods of Test for Vulcanized Rubber Part 9 Rubber Vulcanized Determination of Density Third Revision
54	PCD 29 (13791) Revision of: IS 3400:1977	Methods of Test for Vulcanized Rubbers Part 10 Compression Set Section 1 At ambient or elevated temperatures Second Revision
55	PCD 29 (13793) Revision of: IS 3400:1977	Methods of Test for Vulcanized Rubbers Part 10 Compression Set Section 2 At low temperatures Second Revision
56	PCD 29 (13794) Revision of: IS 3400:1971	Methods of test for vulcanized rubbers Part 12 Tear strength-crescent test piece First Revision
57	PCD 29 (13795) Revision of: IS 3400:1983	Methods of test for vulcanized rubbers Part 13 Tension Set Second Revision
58	PCD 29 (13796) Revision of: IS 3400:1984	Methods of test for Vulcanized Rubbers Part 14 Adhesion of Rubber to Rigid Substrate Section 1 90 peel method Second Revision
59	PCD 29 (13797)	Methods of test for Vulcanized Rubbers Part 14 Adhesion of Rubber to Metal Section 2 Two-plate method Second Revision
60	PCD 29 (13798) Revision of: IS 3400:1984	Methods of test for Vulcanized Rubbers Part 14 Adhesion of Rubber to Rigid Material Section 3 Using conical shaped parts Second Revision
61	PCD 29 (13799) Revision of: IS 3400:2020	Methods of test for vulcanized rubbers Part 19 Permeability to gases constant volume method First Revision
62	PCD 29 (13800) Revision of: IS 3400:2020	Methods of test for vulcanized rubbers Part 21 Permeability to gases -Constant pressure method First Revision
63	PCD 29 (13801) Revision of: IS 13867:1993	Rubber General procedures for preparing and conditioning test pieces for physical test methods First Revision of IS 13867
64	PCD 29 (14142) Revision of: IS 3400:2012	Methods of Test for Vulcanized Rubber Part 1 Tensile Stress-Strain Properties
65	PCD 29 (14143) Revision of: IS 3400:2018	Methods of Test for Vulcanized Rubbers Part 3 Determination of Abrasion Resistance Using a Rotating Cylindrical Drum Device Second Revision
66	PCD 29 (14144) Revision of: IS 3400:1985	Methods of Test for Vulcanized Rubber Part 7 Determination of flex cracking and crack growth De Mattia
67	PCD 29 (14145) Revision of: IS 3660:2017	Methods of Test for Rubber Part 11 Determination of rebound resilience
68	PCD 29 (14146) Revision of: IS 3400:1995	Methods of Test for Vulcanized Rubbers - Part 18 Stiffness at Low Temperature Gehman Test
69	PCD 29 (14147) Revision of: IS 3400:2012	Methods for Test for Volcanized Rubbers - Part 24 Rubber and Plastics Hose - Determination of Adhesion Between Components
70	PCD 29 (17580)	METHODS OF TEST FOR RUBBER VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 1 INTRODUCTION AND GUIDANCE
71	PCD 29 (17581) Revision of: IS 3400:2014	METHODS OF TEST FOR RUBBER VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 2 HARDNESS BETWEEN 10 IRHD AND 100 IRHD Fifth Revision
72	PCD 29 (17582)	METHODS OF TEST FOR RUBBER VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 3 DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS VLRH SCALE
73	PCD 29 (17583) Revision of: IS 3400:2018	METHODS OF TEST FOR RUBBER VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 4 INDENTATION HARDNESS BY DUROMETER METHOD SHORE HARDNESS Second Revision
74	PCD 29 (17584) Revision of: IS 3400:2018	METHODS OF TEST FOR RUBBER VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 5 INDENTATION HARDNESS BY IRHD POCKET METER METHOD Second Revision
75	PCD 29 (17586)	METHODS OF TEST FOR RUBBER VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 6 APPARENT HARDNESS OF RUBBER-COVERED ROLLERS BY IRHD METHOD
76	PCD 29 (17587)	METHODS OF TEST FOR RUBBER VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 7 APPARENT HARDNESS OF RUBBER-COVERED ROLLERS BY SHORE-TYPE DUROMETER METHOD
77	PCD 29 (17588)	METHODS OF TEST FOR RUBBER VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 8 APPARENT HARDNESS OF RUBBER-COVERED ROLLERS BY PUSEY AND JONES METHOD
78	PCD 29 (17589)	METHODS OF TEST FOR RUBBER VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 9 CALIBRATION AND VERIFICATION OF HARDNESS TESTERS
79	PCD 29 (17590) Revision of: IS 3400:1971	METHODS OF TEST FOR RUBBER VULCANIZED OR THERMOPLASTIC PART 15 DETERMINATION OF VOLUME AND OR SURFACE RESISTIVITY First Revision
80	PCD 29 (17591) Revision of: IS 3708:2016	METHODS OF TEST FOR NATURAL RUBBER LATEX PART 4 NATURAL RUBBER LATEX CONCENTRATE DETERMINATION OF ALKALINITY Fourth Revision
81	PCD 29 (17602) Revision of: IS 14794:2018	ISOBUTENE-ISOPRENE RUBBER IIR EVALUATION PROCEDURES Third Revision
82	PCD 29 (17606) Revision of: IS 3400:2018	METHODS OF TEST FOR RUBBER VULCANIZED OR THERMOPLASTIC PART 25 DETERMINATION OF LOW-TEMPERATURE BRITTLENESS First Revision
83	PCD 29 (17608) Revision of: IS 3400:2018	METHODS OF TEST FOR RUBBER VULCANIZED OR THERMOPLASTIC PART 28 DETERMINATION OF STRESS RELAXATION IN COMPRESSION TESTING AT CONSTANT TEMPERATURE First Revision
84	PCD 29 (17609) Revision of: IS 3400:2018	METHODS OF TEST FOR RUBBER VULCANIZED OR THERMOPLASTIC PART 29 DETERMINATION OF AGEING CHARACTERISTICS BY MEASUREMENT OF STRESS RELAXATION IN TENSION First Revision
85	PCD 29 (17611) Revision of: IS 3660:2017	METHODS OF TEST FOR NATURAL RUBBER PART 12 DETERMINATION OF PLASTICITY RETENTION INDEX PRI NR 13 Third Revision
86	PCD 29 (17612) Revision of: IS 3708:2018	METHODS OF TEST FOR NATURAL RUBBER LATEX PART 5 DETERMINATION OF KOH NUMBER Fourth Revision
87	PCD 29 (17670) Revision of: IS 443:2017	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 1 RUBBER AND PLASTICS HOSES ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS Fourth Revision
88	PCD 29 (17672) Revision of: IS 443:2016	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 4 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY Fourth Revision
89	PCD 29 (17675) Revision of: IS 3400:2020	METHODS OF TEST FOR RUBBER VULCANIZED OR THERMOPLASTIC PART 5 ADHESION OF RUBBERS TO TEXTILE FABRICS Fourth Revision
90	PCD 29 (17676) Revision of: IS 17361:2020	METHODS OF TEST FOR RUBBER VULCANIZED OR THERMOPLASTIC PART 10 COMPRESSION SET SECTION 1 AT AMBIENT OR ELEVATED TEMPERATURES Third Revision
91	PCD 29 (17677) Revision of: IS 3400:2020	METHODS OF TEST FOR RUBBER VULCANIZED OR THERMOPLASTIC PART 10 COMPRESSION SET SECTION 2 AT LOW TEMPERATURES Third Revision
92	PCD 29 (17681) Revision of: IS 3708:2005	METHODS OF TEST FOR NATURAL RUBBER LATEX PART 7 DETERMINATION OF VOLATILE FATTY ACID NUMBER Third Revision
93	PCD 29 (17698) Revision of: IS 7016:2016	METHODS OF TEST FOR RUBBER OR PLASTICS COATED FABRICS PART 1 DETERMINATION OF ROLL CHARACTERISTICS SECTION 1 METHODS FOR DETERMINATION OF LENGTH WIDTH AND NET MASS Third Revision
94	PCD 29 (17701) Revision of: IS 7016:2015	METHODS OF TEST FOR RUBBER OR PLASTICS COATED FABRICS PART 2 DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK Third Revision
95	PCD 29 (17703) Revision of: IS 7016:2017	METHODS OF TEST FOR RUBBER OR PLASTICS COATED FABRICS PART 3 DETERMINATION OF TEAR RESISTANCE SECTION 1 CONSTANT RATE OF TEAR METHODS Third Revision
96	PCD 29 (17705) Revision of: IS 7016:2016	METHODS OF TEST FOR RUBBER OR PLASTICS COATED FABRICS PART 6 DETERMINATION OF BURSTING STRENGTH SECTION 1 STEEL-BALL METHOD Third Revision
97	PCD 29 (17707) Revision of: IS 7016:2018	METHODS OF TEST FOR RUBBER OR PLASTICS COATED FABRICS PART 6 DETERMINATION OF BURSTING STRENGTH SECTION 2 HYDRAULIC METHOD Third Revision
98	PCD 29 (17744) Revision of: IS 7016:2009	METHODS OF TEST FOR RUBBER OR PLASTICS COATED FABRICS PART 7 DETERMINATION OF RESISTANCE TO PENETRATION BY WATER Third Revision
99	PCD 29 (17745) Revision of: IS 7016:1997	METHODS OF TEST FOR RUBBER OR PLASTICS COATED FABRICS PART 10 LOW-TEMPERATURE BEND TEST Second Revision
100	PCD 29 (19916) Revision of: IS 7016:1987	METHODS OF TEST FOR RUBBER OR PLASTICS COATED FABRICS PART 11 DETERMINATION OF FLEXIBILITY FLAT LOOP METHOD
101	PCD 29 (19917) Revision of: IS 7016:1975	Methods of test for Coated and Treated Fabrics Part 8 Accelerated Ageing
102	PCD 29 (19940) Revision of: IS 7016:2017	METHODS OF TEST FOR RUBBER OR PLASTICS COATED FABRICS PART 3 DETERMINATION OF TEAR RESISTANCE SECTION 2 BALLISTIC PENDULUM METHOD
103	PCD 29 (19988) Revision of: IS 443:2017	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 3 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES HYDROSTATIC TESTING
104	PCD 29 (19989) Revision of: IS 443:2016	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 2 RUBBER AND PLASTICS HOSES DETERMINATION OF VOLUMETRIC EXPANSION
105	PCD 29 (20001)	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 8 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES METHODS OF MEASUREMENT OF THE DIMENSIONS OF HOSES AND THE LENGTHS OF HOSE ASSEMBLIES ISO 4671 2022 IDT
106	PCD 29 (20002)	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 9 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES DETERMINATION OF RESISTANCE TO VACUUM ISO 7233 2021 IDT
107	PCD 29 (20003)	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 10 RUBBER AND PLASTICS HOSES AND TUBING MEASUREMENT OF FLEXIBILITY AND STIFFNESS BENDING TESTS AT AMBIENT TEMPERATURE ISO 10619-1 2017 IDT
108	PCD 29 (20004)	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 11 RUBBER AND PLASTICS HOSES AND TUBING MEASUREMENT OF FLEXIBILITY AND STIFFNESS BENDING TESTS AT SUB-AMBIENT TEMPERATURES ISO 10619-2 2021 IDT
109	PCD 29 (20016) Revision of: IS 9316:1987	METHODS OF TEST FOR RUBBER LATEX PART 1 DETERMINATION OF SURFACE TENSION RL 1 ISO 1409 2020 IDT
110	PCD 29 (20018) Revision of: IS 9316:1988	METHODS OF TEST FOR RUBBER LATEX PART 4 DETERMINATION OF TOTAL SOLIDS CONTENT RL 4 ISO 124 2014 IDT
111	PCD 29 (20019) Revision of: IS 9316:1987	METHODS OF TEST FOR RUBBER LATEX PART 8 DETERMINATION OF TOTAL IRON ISO 1657 1986 IDT
112	PCD 29 (20088) Revision of: IS 443:2018	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 5 RUBBER AND PLASTICS HOSES DETERMINATION OF ABRASION OF LINING First Revision
113	PCD 29 (20091) Revision of: IS 443:2019	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 6 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES HYDRAULIC PRESSURE IMPULSE TEST WITHOUT FLEXING First Revision
114	PCD 29 (20092)	METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 7 RUBBER AND PLASTICS HOSES DETERMINATION OF ADHESION BETWEEN COMPONENTS
115	PCD 29 (20157) Revision of: IS 3660:1999	METHODS OF TEST FOR NATURAL RUBBER PART 8 RUBBER TEST MIXES PREPARATION MIXING AND VULCANIZATION EQUIPMENT AND PROCEDURES NR 9 Third Revision of IS 3600 Part 8
116	PCD 29 (20158) Revision of: IS 3660:1997	METHODS OF TEST FOR NATURAL RUBBER PART 13 DETERMINATION OF COLOUR NR 14 Second Revision of IS3660 Part 13
117	PCD 29 (20506) Revision of: IS 7499:2001	NATURAL RUBBER NR - EVALUATION PROCEDURE
118	PCD 29 (20510) Revision of: IS 3708:1986	METHODS OF TEST FOR NATURAL RUBBER LATEX PART 10 NATURAL RUBBER LATEX CONCENTRATE DETERMINATION OF BORIC ACID CONTENT
119	PCD 29 (20511) Revision of: IS 4511:1986	Methods of test for Styrene Butadiene Rubber SBR Latices Part 4 Determination of bound Styrene
120	PCD 29 (22777) Revision of: IS 3708:1985	NATURAL RUBBER LATEX- METHODS OF TEST PART 2 -DETERMINATION OF SLUDGE CONTENT Second Revision
121	PCD 29 (22797)	Rubber Methods of Test Part 1 Measurement of vulcanization characteristics using curemeters Section 1 Introduction
122	PCD 29 (22798)	Rubber Methods of Test Part 1 Measurement of vulcanization characteristics using curemeters Section 2 Oscillating disc curemeter
123	PCD 29 (22799)	Rubber Methods of Test Part 1 Measurement of vulcanization characteristics using curemeters Section 3 Rotorless curemeter
124	PCD 29 (22802)	STYRENE BUTADIENE RUBBER METHODS OF TEST PART 4 DETERMINATION OF THE MICROSTRUCTURE OF SOLUTION-POLYMERIZED SBR Section 1 1H-NMR AND IR WITH CAST-FILM METHOD
125	PCD 29 (22803)	STYRENE BUTADIENE RUBBERS METHODS OF TEST PART 4 DETERMINATION OF THE MICROSTRUCTURE OF SOLUTION-POLYMERIZED SBR Section 2 FTIR WITH ATR METHOD
126	PCD 29 (22805) Revision of: IS 3708:1985	NATURAL RUBBER LATEX- Methods of Test PART 6 DETERMINATION OF MECHANICAL STABILITY second revision
127	PCD 29 (22806) Revision of: IS 9316:1987	RUBBER LATEX METHODS OF TEST PART 2 DETERMINATION OF VISCOSITY Second Revision
128	PCD 29 (22807)	STYRENE BUTADIENE RUBBERS METHODS OF TEST PART 3 DETERMINATION OF BOUND STYRENE CONTENT REFRACTIVE INDEX METHOD
129	PCD 29 (22871)	Rubber Methods of Test Part 2 Determination of styrene content Nitration method
130	PCD 29 (24828) Revision of: IS 3400:2018	Vulcanized Rubber Methods of Test Part 20 Resistance to ozone cracking - Static strain test Third Revision
131	PCD 29 (24829) Revision of: IS 3400:2019	Vulcanized Rubber Methods of Test Part 26 Determination of Shear Modulus and Adhesion to Rigid Plates Quadruple-Shear Methods First Revision
132	PCD 29 (24833) Revision of: IS 14788:2018	STYRENE-BUTADIENE RUBBER SBR EMULSION AND SOLUTION-POLYMERIZED TYPES -EVALUATION PROCEDURES Second Revision
133	PCD 29 (24834) Revision of: IS 16705:2018	RECLAIMED RUBBER DERIVED FROM PRODUCTS CONTAINING MAINLY NATURAL RUBBER EVALUATION PROCEDURE First Revision
134	PCD 29 (24835) Revision of: IS 16713:2018	RECLAIMED ISOBUTENE-ISOPRENE IIR RUBBER EVALUATION PROCEDURE First Revision
135	PCD 29 (33546)	RUBBER METHOD OF TEST PART 3 DETERMINATION OF ASH SECTION 1 COMBUSTION METHOD
136	PCD 29 (33550)	RUBBER METHOD OF TEST PART 3 DETERMINATION OF ASH SECTION 2 THERMOGRAVIMETRIC ANALYSIS TGA
137	PCD 29 (33609)	RUBBER METHODS OF TEST PART 4 DETERMINATION OF VOLATILE-MATTER CONTENT SECTION 1 HOT-MILL METHOD AND OVEN METHOD
138	PCD 29 (33612)	RUBBER METHODS OF TEST PART 4 DETERMINATION OF VOLATILE-MATTER CONTENT SECTION 2 THERMOGRAVIMETRIC METHODS USING AN AUTOMATIC ANALYSER WITH AN INFRARED DRYING UNIT
139	PCD 29 (33616)	RUBBER METHODS OF TEST PART 5 DETERMINATIONS USING A SHEARING-DISC VISCOMETER DETERMINATION OF MOONEY VISCOSITY

Total Published Standards:128 Total Standards Under development : 139

Aspect Wise Report

Product:	0
Code of Practices :	0
Methods of Test :	126
Terminology :	0
Dimensions :	1
System Standard :	0
Safety Standard :	0
Others :	1
Service Specification :	0
Process Specification :	0
Unclassified :	0

Total :128

Annexure-I :List of Indian Standards Withdrawn/Superseded

SI. No.	IS No.	Title
1.	IS 11720 (Part 2):2013 ISO 3417 :2008	Methods of test for synthetic rubber Part 2 measurement of vulcanization characteristics with the oscillating disc curemeter Second Revision
2.	IS 12656:2014 ISO 10619-1 : 2011	Rubber or plastics hoses and tubing - Bending tests First Revision
3.	IS 12657:2014 ISO10619-2 : 2011	Rubber and plastics hoses - Subambient temperature flexibility tests First Revision
4.	IS 14789:2000 ISO 5478 : 1990	Rubber - Determination of styrene content - Nitration method
5.	IS 15913:2011	Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
6.	IS 16209:2014 ISO 7233 : 2006	Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
7.	IS 16848:2018 ISO 6502 : 2016	Rubber - Guide to the use of curemeters
8.	IS 3400 (Part 14):1984	Methods of test for vulcanized rubbers Part 14 adhesion of rubber to metal First Revision
9.	IS 3400 (Part 17):1974	Methods of test for vulcanized rubbers Part xvii tear strength - Angular test piece
10.	IS 3400 (Part 10):1977	Methods of test for vulcanized rubbers Part x compression set at constant strain First Revision
11.	IS 3400 (Part 23):2002 ISO 7619	Methods of Test for Vulcanized Rubbers - Part 23 Rubber - Determination of Indentation Hardness by Means of Pocket Hardness Meters
12.	IS 3400 (Part 8):1983	Methods of test for vulcanized rubbers Part 8 resistance to crack - Growth First Revision
13.	IS 3400 (Part 23/Sec 1):2018 ISO 7619-1 : 2010	Methods of test for vulcanized rubbers Part 23 rubber - Determination of indentation hardness by means of pocket hardness meters section 1 durometer method Shore Hardness First Revision
14.	IS 7016 (Part 3):1981	Methods of test for coated and treated fabrics Part 3 determination of tear strength First Revision
15.	IS 7016 (Part 6):1984	Methods of test for coated and treated fabrics - Part 6 determination of bursting strength First Revision
16.	IS 7016 (Part 1):1982	Methods of test for coated and treated fabrics Part 1 determination of roll characteristics First Revision

Annexure-II :List of Indian Product Standards

SI. No.	IS No. & Year	Title
No Records Found