BUREAU OF INDIAN STANDARDS
Programme of Work
MTD15 : Refractories Sectional Committee
- Scope : Standardization in the field of refractories
-
Liaison :ISO TC 33 - Refractories - Participating (P)
ISO TC 33/WG 32 - Test methods for dense shaped refractories - Participating (P)
|
IS 10047:2023 |
Refractory Plastic and Ramming Mass - Method of test (First Revision)
|
-
|
Not Equivalent
|
||
|
IS 10551:2005 Reviewed In : 2025 |
Zircon mullite refractories for glass furnace applications - Specification (First Revision)
|
February, 2025
|
-
|
Indigenous
|
|
|
IS 10570:2011 Reviewed In : 2022 |
Methods of testing refractory castables (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 10817:1984 Reviewed In : 2025 Decision taken to Reaffirm and Archive |
Specification for bauxite for refractory industry
|
February, 2025
|
-
|
Indigenous
|
|
|
IS 10819:1999 Reviewed In : 2022 |
Chromite for refractory industry - Specification (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 11036:1984 Reviewed In : 2022 |
Specification for clay graphite stopper heads
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 12847:1997 Reviewed In : 2022 |
Carbon bonded silicon carbide crucibles - Specification (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 12893:2006 ISO 1146:1988 Reviewed In : 2022 |
Pyrometric reference cones for laboratory use - Specification (First Revision)
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 1292:1991 Reviewed In : 2022 |
Silica mortar for laying silica bricks in furnaces - Specification (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 12951:2006 Reviewed In : 2022 |
Mica insulating bricks for high temperature applications - Specification (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 13150:1991 Reviewed In : 2022 |
Silica mortar for laying silica bricks in coke ovens - Specification
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 14296:1995 Reviewed In : 2022 |
Dolomite for refractory industry - Specification
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 14301:1995 Reviewed In : 2022 |
Kyanite for refractory industry - Specification
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 14302:1995 Reviewed In : 2022 |
Beach sand silimanite for refractory industry - Specification
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 14303:1995 Reviewed In : 2022 |
Magnesite for refractory industry - Specification
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 14313:1995 Reviewed In : 2022 |
70 percent alumina bricks - Specification
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 14406:1996 Reviewed In : 2022 |
Refractories for forge and heat treatment furnaces - Recommendations
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 14447:1997 Reviewed In : 2022 |
Refractories for use in foundry industry - Recommendations
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 14713:1999 Reviewed In : 2022 |
Synthetic (Fused) mullite and alumina grains for refractory industry - Specification
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 14852:2000 Reviewed In : 2022 |
Flaky graphite for refractory industry - Specification
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 1526:1960 Reviewed In : 2022 |
Sizes and shapes for firebricks (230 Mm Series)
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 1528 (Part 1):2010 Reviewed In : 2024 |
Methods of sampling and physical tests for refractory materials: Part 1 determination of pyrometric cone equivalent (Pce) or softening point (Third Revision)
|
July, 2024
|
3
|
Indigenous
|
|
|
IS 1528 (Part 2):2011 Reviewed In : 2023 |
Methods of sampling and physical tests for refractory materials: Part 2 determination of refractoriness under load (Second Revision)
|
August, 2023
|
1
|
Indigenous
|
|
|
IS 1528 (Part 3):2010 Reviewed In : 2024 |
Methods of sampling and physical tests for refractory materials: Part 3 determination of spalling resistance (Third Revision)
|
July, 2024
|
1
|
Indigenous
|
|
|
IS 1528 (Part 4):2012 Reviewed In : 2022 |
Methods of sampling and physical tests for refractory materials: Part 4 determination of cold crushing strength of dense shaped refractories products (Second Revision)
|
March, 2022
|
1
|
Not Equivalent
|
|
|
IS 1528 (Part 5):2007 ISO 5014:1997 Reviewed In : 2022 |
Methods of sampling and physical tests for refractory materials: Part 5 method for determination of modulus of rupture at amblEnt temperature of dense and insulating shaped refractory products (Third Revision)
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 1528 (Part 6):2010 Reviewed In : 2024 |
Methods of sampling and physical tests for refractory materials: Part 6 determination of permanent linear change after reheating for shaped insulating and dense refractories (Second Revision)
|
July, 2024
|
-
|
Not Equivalent
|
|
|
IS 1528 (Part 7):2010 Reviewed In : 2025 |
Methods of sampling and physical tests for refractory materials: Part 7 methods of sampling and criteria for conformity (Second Revision)
|
February, 2025
|
1
|
Not Equivalent
|
|
|
IS 1528 (Part 9):2007 ISO 5018:1983 Reviewed In : 2022 |
Methods of sampling and physical tests for refractory materials: Part 9 determination of true density (Fourth Revision)
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 1528 (Part 12):2007 ISO 5016:1997 Reviewed In : 2022 |
Methods of sampling and physical tests for refractory materials: Part 12 method for determination of bulk density and true porosity of shaped insulating refractory products (Second Revision)
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 1528 (Part 13):2007 ISO 12676:2000 Reviewed In : 2022 |
Methods of sampling and physical tests for refractory materials: Part 13 determination of resistance to carbon monoxide (Second Revision)
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 1528 (Part 14):1974 Reviewed In : 2024 |
Methods of sampling and physical tests for refractory materials: Part 14 determination of sieve analysis (First Revision)
|
March, 2024
|
-
|
Not Equivalent
|
|
|
IS 1528 (Part 15):2020 ISO 5017:2013 Reviewed In : 2024 |
Methods of Sampling and Physical Tests for Refractory Materials Part 15 Method for Determination of Bulk Density, Apparent Porosity and True Porosity of Dense Shaped Refractory Products ( Second Revision )
|
July, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 1528 (Part 16):2020 ISO 8894-2:2007 Reviewed In : 2024 |
Methods of Sampling and Physical Tests for Refractory Materials Part 16 Determination of Thermal Conductivity According to Hot-Wire Method ( Parallel ) ( Second Revision )
|
July, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 1528 (Part 17):2012 ISO 8895:2004 Reviewed In : 2023 |
Methods of sampling and physical tests for refractory materials: Part 17 shaped insulating refractory products - Determination of cold crushing strength (First Revision)
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 1528 (Part 18):1993 ISO 3187:1989 Reviewed In : 2023 |
Methods of sampling and physical tests for refractory materials: Part 18 determination of creep in compression
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 1528 (Part 19):2020 ISO 16835 : 2014 Reviewed In : 2024 |
Methods of Sampling and Physical Tests for Refractory Materials Part 19 Determination of Thermal Expansion ( First Revision )
|
July, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 1528 (Part 20):2023 ISO 5013 : 1985 |
Methods of Sampling and Physical Tests for Refractory Materials : Part 20 Determination of Modulus of Rupture at Elevated Temperature (first revision)
|
-
|
Identical under dual numbering
|
||
|
IS 1528 (Part 21):2020 ISO 8894-1: 2010 Reviewed In : 2024 |
Methods of Sampling and Physical Tests for Refractory Materials Part 21 Determination of Thermal Conductivity According to Hot-Wire Method ( Cross-Array and Resistance Thermometer ) ( First Revision )
|
July, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 1528 (Part 22):2007 ISO 8841:1991 Reviewed In : 2022 |
Methods of sampling and physical tests for refractory materials: Part 22 method for determination of permeability to gases of dense shaped refractory products
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 1528 (Part 23):2011 Reviewed In : 2022 |
Methods of sampling and physical tests for refractory materials: Part 23 methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 1528 (Part 24):2020 ISO 16334 : 2013 Reviewed In : 2024 |
Methods of Sampling and Physical Tests for Refractory Materials Part 24 Monolithic Refractory Proudcts — Determination of Resistance to Explosive Spalling
|
July, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 1528 (Part 25):2020 ISO 16349 : 2015 Reviewed In : 2024 |
Methods of Sampling and Physical Tests for Refractory Materials Part 25 Determination of Abrasion Resistance at Elevated Temperature
|
July, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 1528 (Part 26):2024 ISO 8890:1988 |
Methods of Sampling and Physical Tests for Refractory Materials : Part 26 Method for Determination of Resistance to Sulfuric Acid of Dense Shaped Refractory Products
|
-
|
Identical under dual numbering
|
||
|
IS 1528 (Part 27):2024 ISO 22685:2021 |
Methods of Sampling and Physical Tests for Refractory Materials : Part 27 Method for Determination of Compressive Strength at Elevated Temperature of Refractory Products
|
-
|
Identical under dual numbering
|
||
|
IS 1528 (Part 28):2025 |
Methods of Sampling and Physical Tests for Refractory Materials : Part 28 Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration
|
-
|
Modified/Technically Equivalent
|
||
|
IS 1528 (Part 29):2025 ISO 22605:2020 |
Methods of Sampling and Physical Tests for Refractory Materials : Part 29 Determination of dynamic Young�s modulus (MOE) at elevated temperatures by impulse excitation of vibration
|
-
|
Identical under dual numbering
|
||
|
IS 15507:2004 Reviewed In : 2025 |
Basic insulating coating material for application in tundish used in steel plants - Specification
|
February, 2025
|
-
|
Indigenous
|
|
|
IS 15508:2004 Reviewed In : 2025 |
Refractory mass (Basic Gunning) for steel plant application - Specification
|
February, 2025
|
-
|
Indigenous
|
|
|
IS 15541:2005 Reviewed In : 2022 |
Low cement and ultra low cement castables for general purposes - Specification
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 15895:2018 Reviewed In : 2023 |
High alumina refractory cement - Specification (First Revision)
|
August, 2023
|
-
|
Indigenous
|
|
|
IS 16051 (Part 1):2013 ISO 12678-1:1996 Reviewed In : 2023 |
Refractory products - Measurement of dimensions and external defects of refractory bricks: Part 1 dimensions and conformity to drawings
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16051 (Part 2):2013 ISO 12678-2:1996 Reviewed In : 2023 |
Refractory products - Measurement of dimensions and external defects of refractory bricks: Part 2 corner and edge defects and other surface imperfections
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16052 (Part 1):2013 ISO 13765-1:2004 Reviewed In : 2023 |
Refractory mortars: Part 1 determination of consistency using the penetrating cone method
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16052 (Part 2):2013 ISO 13765-2:2004 Reviewed In : 2023 |
Refractory mortars: Part 2 determination of consistency using the reciprocating flow table method
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16052 (Part 3):2013 ISO 13765-3:2004 Reviewed In : 2023 |
Refractory mortars: Part 3 determination of joint stability
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16052 (Part 4):2013 ISO 13765-4: 2004 Reviewed In : 2022 |
Refractory mortars: Part 4 determination of flexural bonding strength
|
August, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 16052 (Part 5):2013 ISO 13765-5:2004 Reviewed In : 2022 |
Refractory mortars: Part 5 determination of grain size distribution (Sieve Analysis)
|
August, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 16052 (Part 6):2013 ISO 13765-6:2004 Reviewed In : 2022 |
Refractory mortars: Part 6 determination of moisture content of ready - Mixed mortars
|
August, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 16052 (Part 7):2025 ISO 13765-7 : 2021 |
Refractory mortars : Part 7 Determination of permanent change in dimensions on heating
|
-
|
Identical under dual numbering
|
||
|
IS 17107:2019 Reviewed In : 2023 |
Method for determination of thermal conductivity of dense as well as insulating fired refractories, refractory monolithics and precast prefired (PCPF) shapes
|
August, 2023
|
1
|
Indigenous
|
|
|
IS 1749:2005 Reviewed In : 2022 |
Burnt magnesite refractories - Specification (Third Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 1750:1995 Reviewed In : 2022 |
Dead - Burned pea magnesite - Specification (Third Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 1751:1984 Reviewed In : 2022 |
Specification for fireclay cupola refractories (Second Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 17699:2022 |
Standard Classification of Silicon Carbide (SiC) Refractories
|
-
|
Indigenous
|
||
|
IS 18169:2023 |
DETERMINATION OF AVERAGE CRYSTAL SIZE OF MAGNESIA
|
-
|
Indigenous
|
||
|
IS 18171:2023 |
DETERMINATION OF DENSITY AND POROSITY FOR GRANULAR REFRACTORY MATERIALS
|
-
|
Not Equivalent
|
||
|
IS 18816:2024 ISO 5417:1986 |
Refractory bricks for use in rotary kilns � Dimensions
|
-
|
Identical under dual numbering
|
||
|
IS 18817:2024 ISO 9205:1988 |
Refractory bricks for use in rotary kilns � Hot-face identification marking
|
-
|
Identical under dual numbering
|
||
|
IS 18824 (Part 1):2024 ISO 20182:2008 |
Refractory test-piece preparation : Part 1 Gunning refractory panels by the pneumatic-nozzle mixing type guns.
|
-
|
Identical under dual numbering
|
||
|
IS 18824 (Part 2):2024 ISO 18886:2016 |
Refractory test-piece preparation : Part 2 Gunning refractory panels by wet gunning techniques
|
-
|
Identical under dual numbering
|
||
|
IS 195:2005 Reviewed In : 2022 |
Fireclay mortar for laying fireclay refractory bricks - Specification (Fourth Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 2042:2006 Reviewed In : 2022 |
Insulating bricks - Specification (Second Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 2043:1984 Reviewed In : 2022 |
Specification for siliceous fireclay refractories (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 2044:2005 Reviewed In : 2022 |
Mullite refractories for glass melting tank furnaces - Specification (Second Revision)
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 3304:2005 Reviewed In : 2022 |
Burnt magnesite - Chrome refractories for general purposes - Specification (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 3305:2005 Reviewed In : 2022 |
Burnt chrome - Magnesite refractories for general purposes - Specification (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 4041:2006 ISO 836:2001 Reviewed In : 2022 |
Terminology for refractories (First Revision)
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 4812:1996 Reviewed In : 2022 |
Silica refractories for coke oven - Specification (Second Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 4813:1980 Reviewed In : 2022 |
Specification for chemically - Bonded chrome - Magnesitb refractories for general purposes (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 4814:1980 Reviewed In : 2022 |
Specification for chemically - Bonded magnesite - Chrome refractories for general purposes - (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 483:1972 Reviewed In : 2022 |
Specification for fireclay refractories for oil - Fired boiler furnaces of naval ships (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 484:1980 Reviewed In : 2022 |
Specification for silica refractories for general purposes (Second Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 5495:1969 Reviewed In : 2022 |
Sizes and shapes for firebricks (300 Mm And Higher Sizes)
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 6:1983 Reviewed In : 2025 |
Moderate Heat Duty Fireclay Refractories, Group `A'
|
February, 2025
|
-
|
Indigenous
|
|
|
IS 7199:2008 Reviewed In : 2024 |
Blast furnace stove refractories - Specification (First Revision)
|
March, 2024
|
-
|
Indigenous
|
|
|
IS 8:1994 Reviewed In : 2022 |
High heat duty fireclay refractories - Specification (Fgth Revision)
|
April, 2022
|
-
|
Indigenous
|
|
|
IS 8953:2006 Reviewed In : 2022 |
62 percent alumina bricks and blocks for blast furnace - Specification (First Revision)
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 9010:1978 Reviewed In : 2022 |
Specificatign for super heat duty fireclay refractories
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 9930:2005 Reviewed In : 2025 |
Zircon refractories for glass furnace applications - Specification (First Revision)
|
February, 2025
|
-
|
Indigenous
|
| No Records Found |
| No Records Found |
| No Records Found |
| No Records Found | ||
| No Records Found | ||
|
MTD 15 (33219)
|
Methods of sampling and physical tests for refractory materials Part 14 determination of sieve analysis First Revision |
|
|
IS 10607:1983 Reviewed In : 2017 |
Specification for refractories for cement rotary kilns |
|
|
IS 11452:1985 Reviewed In : 2020 |
Method of testing air - Setting refractory mortars |
|
|
IS 13185:1991 Reviewed In : 2022 |
Method of test for determination of drying shrinkage of refractory mortars |
|
|
IS 14374:1996 Reviewed In : 2011 |
Refractories for chimney - Recommendation |
|
|
IS 1522:1998 Reviewed In : 2017 |
Fireclay blocks for glass tank furnace - Specification Second Revision |
|
|
IS 1523:1972 Reviewed In : 2022 |
Specification for bottom - Pouring refractories for steel plants First Revision |
|
|
IS 1524:1968 Reviewed In : 2017 |
Specification for refractory sleeves First Revision |
|
|
IS 1525:1968 Reviewed In : 2017 |
Ladle refractories for steel plants |
|
|
IS 1528 (Part 8):1974 Reviewed In : 2009 |
Methods of Sampling and Physical Tests for Refractory Materials - Part VIII Determination of Apparent Porosity |
|
|
IS 1528 (Part 10):1974 Reviewed In : 2019 |
Methods of sampling and physical tests for refractory materials Part 10 determination of size of refractory bricks First Revision |
|
|
IS 1528 (Part 11):1993 Reviewed In : 2022 |
Methods of sampling and physical tests for refractory materials Part 11 determination of warpage Second Revision |
|
|
IS 1529:1971 Reviewed In : 2017 |
Specification for blast furnace refractories for steel plants |
|
|
IS 15895:2011 |
High Alumina Refractory Cement |
|
|
IS 17069:2019 |
Method for Determination of Thermal Conductivity of Dense as Well as Insulating Fired Refractories Refractory Monolithics and Precast Prefired PCPF Shapes |
|
|
IS 194:1950 |
Recommendations for refractories for railways |
|
|
IS 2045:1962 |
Natural silimanite blocks for glass melting tanks furnaces |
|
|
SP 37-3:1987 Reviewed In : 2017 |
Handbook for refractories Part 3 refractories for cement kiln system |
|
|
IS 4564:1968 Reviewed In : 2022 |
Specification for fireclay nozzles |
|
|
IS 4565:1968 Reviewed In : 2022 |
Specification for fireclay stoppers |
|
|
IS 4801:1980 Reviewed In : 2017 |
Specification for chemically - Bonded magnesite - Chrome refractories for roof lining First Revision |
|
|
IS 485:1954 |
Methods of sampling and testing of refractory materials tentative |
|
|
IS 6727:1972 Reviewed In : 2017 |
Specification for fireclay checker - Bricks for open - Hearth furnace |
|
|
IS 6728:1972 Reviewed In : 2022 |
Specification for recuperator tubes tiles and collars for soaking pits in steel plants |
|
|
IS 7:1980 |
Moderate Heat Duty Fireclay Refractories Group B |
|
|
IS 8966:1978 Reviewed In : 2022 |
Specification for magnesite nozzles |
|
|
IS 8977:1978 Reviewed In : 2022 |
Specification for clay bonded graphite crucibles |
|
IS 10551:2005 Reviewed In : 2025 |
Zircon mullite refractories for glass furnace applications - Specification First Revision |
|
|
IS 10817:1984 Reviewed In : 2025 Decision taken to Reaffirm and Archive |
Specification for bauxite for refractory industry |
|
|
IS 10819:1999 Reviewed In : 2022 |
Chromite for refractory industry - Specification First Revision |
|
|
IS 11036:1984 Reviewed In : 2022 |
Specification for clay graphite stopper heads |
|
|
IS 12847:1997 Reviewed In : 2022 |
Carbon bonded silicon carbide crucibles - Specification First Revision |
|
|
IS 12893:2006 ISO 1146:1988 Reviewed In : 2022 |
Pyrometric reference cones for laboratory use - Specification First Revision |
|
|
IS 1292:1991 Reviewed In : 2022 |
Silica mortar for laying silica bricks in furnaces - Specification First Revision |
|
|
IS 12951:2006 Reviewed In : 2022 |
Mica insulating bricks for high temperature applications - Specification First Revision |
|
|
IS 13150:1991 Reviewed In : 2022 |
Silica mortar for laying silica bricks in coke ovens - Specification |
|
|
IS 14296:1995 Reviewed In : 2022 |
Dolomite for refractory industry - Specification |
|
|
IS 14301:1995 Reviewed In : 2022 |
Kyanite for refractory industry - Specification |
|
|
IS 14302:1995 Reviewed In : 2022 |
Beach sand silimanite for refractory industry - Specification |
|
|
IS 14303:1995 Reviewed In : 2022 |
Magnesite for refractory industry - Specification |
|
|
IS 14313:1995 Reviewed In : 2022 |
70 percent alumina bricks - Specification |
|
|
IS 14406:1996 Reviewed In : 2022 |
Refractories for forge and heat treatment furnaces - Recommendations |
|
|
IS 14447:1997 Reviewed In : 2022 |
Refractories for use in foundry industry - Recommendations |
|
|
IS 14713:1999 Reviewed In : 2022 |
Synthetic Fused mullite and alumina grains for refractory industry - Specification |
|
|
IS 14852:2000 Reviewed In : 2022 |
Flaky graphite for refractory industry - Specification |
|
|
IS 1526:1960 Reviewed In : 2022 |
Sizes and shapes for firebricks 230 Mm Series |
|
|
IS 15507:2004 Reviewed In : 2025 |
Basic insulating coating material for application in tundish used in steel plants - Specification |
|
|
IS 15508:2004 Reviewed In : 2025 |
Refractory mass Basic Gunning for steel plant application - Specification |
|
|
IS 15541:2005 Reviewed In : 2022 |
Low cement and ultra low cement castables for general purposes - Specification |
|
|
IS 1749:2005 Reviewed In : 2022 |
Burnt magnesite refractories - Specification Third Revision |
|
|
IS 1750:1995 Reviewed In : 2022 |
Dead - Burned pea magnesite - Specification Third Revision |
|
|
IS 1751:1984 Reviewed In : 2022 |
Specification for fireclay cupola refractories Second Revision |
|
|
IS 17699:2022 |
Standard Classification of Silicon Carbide SiC Refractories |
|
|
IS 195:2005 Reviewed In : 2022 |
Fireclay mortar for laying fireclay refractory bricks - Specification Fourth Revision |
|
|
IS 2042:2006 Reviewed In : 2022 |
Insulating bricks - Specification Second Revision |
|
|
IS 2043:1984 Reviewed In : 2022 |
Specification for siliceous fireclay refractories First Revision |
|
|
IS 2044:2005 Reviewed In : 2022 |
Mullite refractories for glass melting tank furnaces - Specification Second Revision |
|
|
IS 3304:2005 Reviewed In : 2022 |
Burnt magnesite - Chrome refractories for general purposes - Specification First Revision |
|
|
IS 3305:2005 Reviewed In : 2022 |
Burnt chrome - Magnesite refractories for general purposes - Specification First Revision |
|
|
IS 4812:1996 Reviewed In : 2022 |
Silica refractories for coke oven - Specification Second Revision |
|
|
IS 4813:1980 Reviewed In : 2022 |
Specification for chemically - Bonded chrome - Magnesitb refractories for general purposes First Revision |
|
|
IS 4814:1980 Reviewed In : 2022 |
Specification for chemically - Bonded magnesite - Chrome refractories for general purposes - First Revision |
|
|
IS 483:1972 Reviewed In : 2022 |
Specification for fireclay refractories for oil - Fired boiler furnaces of naval ships First Revision |
|
|
IS 484:1980 Reviewed In : 2022 |
Specification for silica refractories for general purposes Second Revision |
|
|
IS 6:1983 Reviewed In : 2025 |
Moderate Heat Duty Fireclay Refractories Group A |
|
|
IS 7199:2008 Reviewed In : 2024 |
Blast furnace stove refractories - Specification First Revision |
|
|
IS 8:1994 Reviewed In : 2022 |
High heat duty fireclay refractories - Specification Fgth Revision |
|
|
IS 8953:2006 Reviewed In : 2022 |
62 percent alumina bricks and blocks for blast furnace - Specification First Revision |
|
|
IS 9010:1978 Reviewed In : 2022 |
Specificatign for super heat duty fireclay refractories |
|
|
IS 9930:2005 Reviewed In : 2025 |
Zircon refractories for glass furnace applications - Specification First Revision |