BUREAU OF INDIAN STANDARDS
Programme of Work
MED40 : Safety of Machinery
- Scope : Standardization of basic concepts and general principles for Mechanical safety of manufacturing machinery incorporating terminology, methodology, guards and safety devices within the framework of IS/ISO/IEC Guide 51 (Safety aspects - Guidelines for their inclusion in standards and in cooperation with other sectional committee). Except: Product safety standards, as defined in IS/ISO/IEC Guide 51, and which are explicitly covered by the work of other ISO or IEC technical committees.
-
Liaison :ISO/TC 199 - Safety of machinery - Participating (P)
ISO/TC 199/WG 10 - Fire prevention and protection
ISO/TC 199/WG 11 - Permanent means of access to machinery
ISO/TC 199/WG 12 - Human-machine-interactions
ISO/TC 199/WG 3 - Safety of integrated manufacturing systems
ISO/TC 199/WG 5 - General principles for the design of machinery and risk assessment
ISO/TC 199/WG 6 - Safety distances and ergonomic aspects
ISO/TC 199/WG 7 - Interlocking devices
ISO/TC 199/WG 8 - Safe Control Systems
|
IS/ISO/TR 14121-2:2012 ISO/TR 14121-2:2012 |
Safety of machinery - Risk assessment Part 2 Practical guidance and examples of methods
|
-
|
Identical under single numbering
|
||
|
IS 16806 (Part 1):2018 ISO 29042-1 : 2008 Reviewed In : 2023 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 1 selection of test methods
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16806 (Part 2):2018 ISO 29042-2 : 2009 Reviewed In : 2023 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 2 tracer gas method for the measurement of the emission rate of a given pollutant
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16806 (Part 3):2018 ISO 29042-3 : 2009 Reviewed In : 2023 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 3 test bench method for the measurement of the emission rate of a given pollutant
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16806 (Part 4):2018 ISO 29042-4 : 2009 Reviewed In : 2023 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 4 tracer method for the measurement of the capture efficiency of an exhaust system
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16806 (Part 5):2018 ISO 29042-5 : 2010 Reviewed In : 2023 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 5 test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16806 (Part 6):2018 ISO 29042-6 : 2010 Reviewed In : 2023 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 6 test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16806 (Part 7):2018 ISO 29042-7 ; 2010 Reviewed In : 2023 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 7 test bench method for the measurement of the pollutant concentration parameter
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16806 (Part 8):2018 ISO 29042-8 : 2011 Reviewed In : 2023 |
Safety of Machinery - Evaluation of the Emission of Airborne Hazardous Substances Part 8 Room Method for the Measurement of the Pollutant Concentration Parameter
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16806 (Part 9):2018 ISO 29042-9 : 2011 Reviewed In : 2023 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 9 decontamination index
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16807:2020 ISO 19353 : 2019 Reviewed In : 2024 |
Safety of Machinery - Fire Prevention and Fire Protection (First Revision)
|
July, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 16808:2018 ISO 14159 : 2002 Reviewed In : 2023 |
Safety of machinery - Hygiene requirements for the design of machinery
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16809 (Part 1):2018 ISO 14122-1 : 2016 Reviewed In : 2023 |
Safety of machinery - Permanent means of access to machinery: Part 1 choice of fixed means and general requirements of access
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16809 (Part 2):2018 ISO 14122-2 : 2016 Reviewed In : 2023 |
Safety of machinery - Permanent means of access to machinery: Part 2 working platforms and walkways
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16809 (Part 3):2018 ISO 14122-3 : 2016 Reviewed In : 2023 |
Safety of machinery - Permanent means of access to machinery: Part 3 stairs, stepladders and guard - Rails
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16809 (Part 4):2018 ISO 14122-4 : 2016 Reviewed In : 2023 |
Safety of machinery - Permanent means of access to machinery: Part 4 fixed ladders
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16810 (Part 1):2018 ISO 13849-1 : 2015 Reviewed In : 2023 |
Safety of machinery - Safety related parts of control systems: Part 1 general principles for design
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16810 (Part 2):2018 ISO 13849-2 : 2012 Reviewed In : 2023 |
Safety of machinery - Safety related parts of control systems: Part 2 validation
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16811:2018 ISO 14120 : 2015 Reviewed In : 2023 |
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16812:2018 ISO 14119 : 2013 Reviewed In : 2023 |
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16813:2019 ISO 14118 : 2017 Reviewed In : 2023 |
Safety of machinery - Prevention of unexpected start - Up
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16814:2021 ISO 13857:2019 |
SAFETY OF MACHINERY SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS
|
-
|
Identical under dual numbering
|
||
|
IS 16815:2019 ISO 13855 : 2010 Reviewed In : 2023 |
Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16816:2019 ISO 13854 : 2017 Reviewed In : 2023 |
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16817:2020 ISO 13851 : 2019 Reviewed In : 2024 |
Safety of Machinery - Two-Hand Control Devices - Principles for Design and Selection (First Revision)
|
July, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 16818:2018 ISO 13850 : 2015 Reviewed In : 2023 |
Safety of machinery - Emergency stop function - Principles for design
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16819:2018 ISO 12100 : 2010 Reviewed In : 2023 |
Safety of machinery - General principles for design - Risk assessment and risk reduction
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16834 (Part 1):2018 ISO14123-1 : 2015 Reviewed In : 2023 |
Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery: Part 1 principles and specifications for machinery manufacturers
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16834 (Part 2):2018 ISO 14123-2 : 2015 Reviewed In : 2023 |
Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery: Part 2 methodology leading to verification procedures
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16835 (Part 1):2018 ISO 13856-1 : 2013 Reviewed In : 2023 |
Safety of machinery - Pressure - Sensitive protective devices: Part 1 general principles for design and testing of pressure - Sensitive mats and pressure - Sensitive floors
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16835 (Part 2):2018 ISO 13856-2 : 2013 ‘ Reviewed In : 2023 |
Safety of machinery - Pressure - Sensitive protective devices: Part 2 general principles for design and testing of pressure - Sensitive edges and pressure - Sensitive bars
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16835 (Part 3):2018 ISO 13856-3 : 2013 Reviewed In : 2023 |
Safety of machinery - Pressure - Sensitive protective devices: Part 3 general principles for design and testing of pressure - Sensitive bumpers, plates, wires and similar devices
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16912:2018 ISO 21469 : 2006 Reviewed In : 2023 |
Safety of machinery — Lubricants with incidental product contact — Hygiene requirements
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 18966:2024 ISO Guide 78:2012 |
Safety of machinery - Rules for drafting and presentation of safety standards
|
-
|
Identical under dual numbering
|
||
|
IS 18982:2024 ISO/TR 24119:2015 |
Safety of machinery - Evaluation of fault masking serial connection of interlocking devices associated with guards with potential free contacts
|
-
|
Identical under dual numbering
|
||
|
IS 18988 (Part 1):2024 ISO/TR 22100-1:2021 |
Safety of machinery - Relationship with ISO 12100 Part 1 How ISO 12100 relates to type-B and type-C standards
|
-
|
Identical under dual numbering
|
||
|
IS 18988 (Part 3):2025 ISO/TR 22100-3 : 2016 |
Safety of machinery - Relationship with ISO 12100 Part 3 Implementation of ergonomic principles in safety standards
|
-
|
Identical under dual numbering
|
||
|
IS 18988 (Part 4):2024 ISO/TR 22100-4:2018 |
Safety of machinery - Relationship with ISO 12100 Part 4 Guidance to machinery manufacturers for consideration of related IT-security (cyber security) aspects
|
-
|
Identical under dual numbering
|
||
|
IS 18988 (Part 5):2024 ISO/TR 22100-5:2021 |
Safety of machinery - Relationship with ISO 12100 Part 5 Implications of artificial intelligence machine learning
|
-
|
Identical under dual numbering
|
||
|
IS 18989:2024 ISO 20607:2019 |
Safety of machinery - Instruction handbook - General drafting principles
|
-
|
Identical under dual numbering
|
||
|
IS 18990:2024 ISO/TR 22053:2021 |
Safety of machinery - Safeguarding supportive system
|
-
|
Identical under dual numbering
|
||
|
IS/ISO/TS 19837:2018 ISO/TS 19837:2018 |
Safety of machinery - Trapped key interlocking devices - Principles for design and selection
|
-
|
Identical under single numbering
|
||
|
IS/ISO/TR 22100-2:2013 ISO TR 22100-2:2013 |
Safety of machinery Relationship with ISO 12100 Part 2: How ISO 12100 relates to ISO 13849-1 Adoption of ISOTR 22100-2 : 2013
|
-
|
Identical under single numbering
|
||
|
IS/ISO/TR 22100-3:2013 ISO TR 22100-3 : 2013 |
Safety of machinery Relationship with ISO 12100 Part 3: Implementation of ergonomic principles in safety standards Adoption of ISOTR 22100-3 : 2016
|
-
|
Identical under single numbering
|
| No Records Found |
| No Records Found |
| No Records Found |
| No Records Found | ||
MED 40 (32938)
|
Acoustics Determination of Sound Power Levels and Sound Energy Levels of Noise Sources using Sound Pressure Engineering Methods for an Essentially Free Field over a Reflecting Plane |
|
MED 40 (32939)
|
Acoustics Determination of Sound Power Levels and Sound Energy Levels of Noise Sources Using Sound Pressure Precision Methods for Anechoic Rooms and Hemi-Anechoic Rooms |
|
MED 40 (32923)
|
Acoustics - Noise emitted by machinery and equipment-Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions | |
|
MED 40 (32926)
|
Acoustics Noise Emitted by Machinery and Equipment Determination of Emission Sound Pressure Levels at a Work Station and at other Specified Positions in an Essentially Free Field over a Reflecting Plane with Negligible Environmental Corrections | |
|
MED 40 (32929)
|
Acoustics Determination of Sound Power Levels and Sound Energy Levels of Noise Sources using Sound Pressure Precision Methods for Reverberation Test Rooms | |
|
MED 40 (32930)
|
Acoustics Noise Emitted by Machinery and Equipment Determination of Emission Sound Pressure Levels at a Work Station and at other Specified Positions Applying Approximate Environmental Corrections | |
|
MED 40 (32932)
|
Acoustics Determination of Sound Power Levels and Sound Energy Levels of Noise Sources Using Sound Pressure Engineering Methods for Small Movable Sources in Reverberant Fields Part 1 Comparison Method for a Hard-Walled Test Room | |
|
MED 40 (32933)
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level | |
|
MED 40 (32934)
|
Acoustics Noise Emitted by Machinery and Equipment Determination of Emission Sound Pressure Levels at a Work Station and at other Specified Positions Applying Accurate Environmental Corrections | |
|
MED 40 (32935)
|
Acoustics Noise Emitted by Machinery and Equipment Engineering Method for the Determination of Emission Sound Pressure Levels in Situ at the Work Station and at other Specified Positions using Sound Intensity | |
|
MED 40 (32937)
|
Acoustics Determination Of Sound Power Levels Of Noise Sources Using Sound Pressure Engineering Methods For Small Movable Sources In Reverberant Fields Part 2 Methods For Special Reverberation Test Rooms | |
|
MED 40 (32943)
|
Acoustics Determination of Sound Power Levels and Sound Energy Levels of Noise Sources using Sound Pressure Survey Method Using an Enveloping Measurement Surface over a Reflecting Plane | |
|
MED 40 (32944)
|
Acoustics Determination of Sound Power Levels and Sound Energy Levels of Noise Sources using Sound Pressure Engineering Survey Methods for use in Situ in a Reverberant Environment | |
|
MED 40 (33577)
|
Safety of Machinery Safety-Related Parts of Control Systems Part 1 General Principles for Design First Revision | |
|
MED 40 (33578)
|
Safety of Machinery Positioning of Safeguards with Respect to the Approach of the Human Body First Revision | |
|
MED 40 (33586)
|
Safety of Machinery Interlocking Devices Associated with Guards Principles for Design and Selection First Revision |
|
|
IS 16810:2018 ISO 13849-2 : 2012 |
Safety of Machinery Safety Related Parts of Control Systems Part 2 Validation |