BUREAU OF INDIAN STANDARDS
Programme of Work
MTD21 : Non-Destructive Testing Sectional Committee
- Scope : Standardization in the field of non-destructive testing
-
Liaison :ISO/TC 135 - Non-destructive testing - Participating (P)
ISO/TC 135/SC 2 - Surface methods - Participating (P)
ISO/TC 135/SC 3 - Ultrasonic testing - Participating (P)
ISO/TC 135/SC 4 - Eddy current testing - Participating (P)
ISO/TC 135/SC 5 - Radiographic testing - Participating (P)
ISO TC 135/SC 5/WG SG 1 - Gammatopography of shielding integrity - Convenorship
ISO/TC 135/SC 6 - Leak testing - Participating (P)
ISO/TC 135/SC 6/WG 1 - Leak testing in pressured vessels and underground pipelines using radioactive tracer methods
ISO/TC 135/SC 7 - Personnel qualification - Participating (P)
ISO/TC 135/SC 8 - Thermographic testing - Participating (P)
ISO/TC 135/SC 9 - Acoustic emission testing - Participating (P)
|
IS 10543:1983 |
Method for dry powder magnetic particle testing
|
February, 2020
|
-
|
Not Equivalent
|
|
|
IS 11612:2004 |
Code of practice for eddy current testing of non-ferrous seamless pipes and tubes (First Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 11626:2005 Reviewed In : 2020 |
Recommended practice for ultrasonic testing and acceptance for plain carbon and low alloy forging quality steel blooms (First Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 11630:2005 Reviewed In : 2020 |
Method for ultrasonic testing of steel plates for pressure vessels and special applications (First Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 11655:1986 Reviewed In : 2020 |
Procedure for stray flux testing of ferrous magnetic seamless steel tubular products
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 1182:1983 Reviewed In : 2020 |
Recommended - Practice for radiographic examination of fusion welded butt joints in steel plates (Second Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 12147:2013 |
Recommended practice for wet magnetic particle examination (First Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 12148:1987 Reviewed In : 2020 |
Guidelines for requirements of non-destructive testing agencies
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 12666:2018 Reviewed In : 2024 |
Performance assessment of ultrasonic flaw detection equipment (First Revision)
|
March, 2024
|
-
|
Not Equivalent
|
|
|
IS 12710:1989 Reviewed In : 2020 |
Acoustic emission testing - Glossary of terms
|
February, 2020
|
-
|
Not Equivalent
|
|
|
IS 12782:1989 Reviewed In : 2020 |
Guidelines for using thermography for monitoring of industrial components
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 12860:1989 Reviewed In : 2020 |
Metallic coating thickness by X-ray fluorescence technique method - Determination
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 12889:2018 Reviewed In : 2024 |
Performance evaluation of materials used for liquid penetrant test (First Revision)
|
March, 2024
|
-
|
Not Equivalent
|
|
|
IS 12965:1990 Reviewed In : 2020 |
Glossary of terms used in electro magnetic (Eddy Current) testing
|
February, 2020
|
-
|
Not Equivalent
|
|
|
IS 13190:1991 Reviewed In : 2020 |
Recommended practice for eddy current examination by rotating probe method of round steel bars
|
February, 2020
|
-
|
Not Equivalent
|
|
|
IS 13805:2004 Reviewed In : 2020 |
General standard for qualification and certification of non - Destructive testing personnel - Specification (First Revision)
|
February, 2020
|
1
|
Not Equivalent
|
|
|
IS 14669:1999 Reviewed In : 2020 |
Thermal neutron radiography - Recommended practices
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 14670:1999 Reviewed In : 2020 |
Recommended practice for acoustic emission inspection during hydrostatic pressure testing of system
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 14800:2000 |
Recommended practice for sorting of ferrous/non - Ferrous materials using electromagnetic (Eddy Current) technique
|
February, 2020
|
-
|
Not Equivalent
|
|
|
IS 15404:2003 Reviewed In : 2020 |
Recommended practice for measuring ultrasonic velocity in materials
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 15435:2003 Reviewed In : 2020 |
Recommended practice for measuring thickness using ultrasonic method
|
February, 2020
|
-
|
Not Equivalent
|
|
|
IS 15452:2004 |
Recommended practice for flaw sizing by ultrasonic DGS method
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 15468:2004 Reviewed In : 2020 |
Performance evaluation of ultrasonic thickness gauges
|
February, 2020
|
-
|
Not Equivalent
|
|
|
IS 15531:2004 Reviewed In : 2020 |
Recommended practice for ultrasonic testing of weld fillets of non-linear joints
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 15539:2004 |
Recommended practice for magnetic particle examination of steam turbine rotor blades
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 15540:2004 |
Recommended practice for eddy current testing of installed non-ferromagnetic heat exchanger tubing using dual frequency method
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 15643:2006 Reviewed In : 2020 |
Non - Destructive examination of polymer based composite materials - Code of practice
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 15775:2008 Reviewed In : 2020 |
Glossary of terms for signal analysis related to non-destructive testing
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 15987:2013 Reviewed In : 2020 |
Non - Destructive testing of concrete structures using impact - Echo technique - Recommended practice
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 16168:2014 Reviewed In : 2020 |
Guidelines for infrared thermography inspection of electrical installations
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 16241:2018 Reviewed In : 2024 |
Realtime radioscopic examination of weldments
|
March, 2024
|
-
|
Indigenous
|
|
|
IS 16979:2018 Reviewed In : 2024 |
Guidelines for visual inspection using borescopes and videoscopes
|
March, 2024
|
-
|
Indigenous
|
|
|
IS 17069 (Part 1):2019 ISO 14096-1 : 2005 Reviewed In : 2024 |
Non - Destructive testing - Qualification of radiographic film digitization systems: Part 1 definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
|
March, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 17069 (Part 2):2019 ISO 14096-2 : 2005 Reviewed In : 2024 |
Non - Destructive testing - Qualification of radiographic film digitization systems: Part 2 minimum requirements
|
March, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 17180:2020 |
Guidelines for Using Infrared Thermography for Condition of Rotating Components
|
-
|
Indigenous
|
||
|
IS 17181:2020 |
Remote Field Eddy Current Testing of Steam Generator and Heat Exchanger Tubes
|
-
|
Not Equivalent
|
||
|
IS 17182:2020 |
X-ray Diffraction Based Residual Stress Measurements
|
-
|
Indigenous
|
||
|
IS 17537 (Part 1):2021 ISO 15708-1 : 2017 |
Non-destructive testing - Radiation methods for computed tomography - Part 1: Terminology
|
-
|
Identical under dual numbering
|
||
|
IS 17537 (Part 2):2021 ISO 15708-2 : 2017 |
Non-destructive testing - Radiation methods for computed tomography - Part 2 Principles, equipment and samples
|
-
|
Identical under dual numbering
|
||
|
IS 18115:2023 ISO 16827 : 2012 |
Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
|
-
|
Identical under dual numbering
|
||
|
IS 18907:2024 |
MICRO-FOCAL RADIOGRAPHY FOR INDUSTRIAL COMPONENTS RECOMMENDED PRACTICES
|
-
|
Indigenous
|
||
|
IS 19362:2025 |
Non-destructive testing Eddy Current TestingDetermination of Electrical Conductivity of Non-magnetic Metals
|
-
|
Indigenous
|
||
|
IS 2417:2003 Reviewed In : 2020 |
Glossary of terms used in ultrasonic non-destructive testing (Second Revision)
|
February, 2020
|
-
|
Not Equivalent
|
|
|
IS 2478:1991 Reviewed In : 2020 |
Glossary of terms relating to industrial radiology (Second Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 2595:2008 |
Industrial radiographic testing - Code of practice (Second Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 2953:1985 |
Glossary of terms used for interpretation of welds and castings radiographs (First Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS/ISO 3057:1998 |
Non - Destructive testing - Metallographic replica techniques of surface examination
|
February, 2020
|
-
|
Identical under single numbering
|
|
|
IS 3415:1998 |
Glossary of terms used in magnetic particle flaw detection (Second Revision)
|
February, 2020
|
-
|
Not Equivalent
|
|
|
IS 3657:2018 Reviewed In : 2024 |
Specification for radiographic image quality indicators (Second Revision)
|
March, 2024
|
-
|
Not Equivalent
|
|
|
IS 3658:1999 Reviewed In : 2020 |
Code of practice for liquid penetrant flaw detection (Second Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 3664:1981 |
Code of practice for ultrasonic pulse echo testing by contact and immersion methods (first revision)
|
February, 2020
|
-
|
Not Equivalent
|
|
|
IS 3703:2023 |
Recommended practice for magnetic particle flaw detection Third Revision
|
-
|
Indigenous
|
||
|
IS 4225:2021 |
Steel — Ultrasonic Testing of Steel Flat Products of Thickness Equal to or Greater than 6 mm (Third Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 4260:2004 Reviewed In : 2021 |
Recommended practice for ultrasonic testing of butt welds in ferritic steel (Third Revision)
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 4853:1982 Reviewed In : 2020 |
Recommended practice for radiographic inspection of fusion welded butt joints in steel pipes (First Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 4904:2006 Reviewed In : 2023 |
Calibration blocks for use in ultrasonic non - Destructive testing - Specification (Fourth Revision)
|
March, 2023
|
-
|
Not Equivalent
|
|
|
IS 5334:2014 Reviewed In : 2020 |
Magnetic particle flaw detection of welds - Code of practice (Third Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS/ISO 5580:1985 Reviewed In : 2023 |
Non - Destructive testing - Industrial radiographic illuminators - Minimum requirements
|
March, 2023
|
-
|
Identical under single numbering
|
|
|
IS 6394:2006 Reviewed In : 2023 |
Ultrasonic testing of seamless metallic tubular products by contact and immersion methods - Code of practice (Second Revision)
|
March, 2023
|
-
|
Indigenous
|
|
|
IS 6398 (Part 2):2020 ISO 10893-2 : 2011 |
Non-Destructive Testing of Steel Tubes Part 2 Automated Eddy Current Testing of Seamless and Welded ( Except Submerged Arc-Welded ) Steel Tubes for the Detection of imperfections ( Second Revision )
|
-
|
1
|
Identical under dual numbering
|
|
|
IS 6410:2013 |
Magnetic flaw detection inks and powders - Specification (Second Revision)
|
February, 2020
|
-
|
Not Equivalent
|
|
|
IS 6752:2014 |
Code of practice for magnetic particle flaw detection of ferrous pipes and tubes (Second Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 7343:1986 |
Code of practice for ultrasonic testing of ferrous welded pipes and tubular products - (First Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 7666:1988 Reviewed In : 2020 |
Ultrasonic examination of ferritic castings of carbon and low alloy steel - Recommedned procedure (First Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 7743:2006 Reviewed In : 2023 |
Recommended practice for magnetic particle testing and inspection of steel forgings (First Revision)
|
March, 2023
|
-
|
Indigenous
|
|
|
IS 7810:1999 |
Code of practice for radiographic examination of resistance spot welds on aluminium and its alloys (First Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 8780:2004 |
Non - Destructive testing of steel castings - Code of practice (First Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 8791:1978 Reviewed In : 2020 |
Code of practice for ultrasonic flaw detection of ferritic steel forgings
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 8973:1991 Reviewed In : 2020 |
Leak detection techniques glossary (First Revision)
|
February, 2020
|
-
|
Not Equivalent
|
|
|
IS 9902:2004 Reviewed In : 2020 |
Recommended practice for leak testing (First Revision)
|
February, 2020
|
-
|
Indigenous
|
| No Records Found |
|
MTD 21 (26454)
|
NON-DESTRUCTIVE TESTING OF STEEL WIRES AUTOMATED EDDY CURRENT TESTING OF STEEL WIRES FOR DETECTION OF SURFACE IMPERFECTIONS |
|
|
MTD 21 (28532)
|
Non-destructive testing Gamma scanning method of highly attenuating container walls Evaluation of the integrity of various shielding structures by using gamma topography technique |
| No Records Found |
| No Records Found | ||
| No Records Found | ||
| No Records Found |
|
|
IS 2598:1966 |
Safety code for industrial radiographic practice |
|
|
IS 7281:1974 |
Code of practice for immersed ultrasonic testing by the reflection method using pulse longitudinal waves |
|
|
IS 9346:1979 Reviewed In : 1993 |
Recommended practice for certification of NDT personnel for ultrasonic examination |
|
IS 6410:2013 |
Magnetic flaw detection inks and powders - Specification Second Revision |