BUREAU OF INDIAN STANDARDS
Programme of Work
MED16 : Gas Cylinders
- Scope : Formulation of standards on gas cylinders for permanent, high pressure liquefiable low pressure liquefiable and dissolved gases; fittings of gas cylinder, namely valve fittings, pressure regulators; pipelines conveying gases; identification colours of gas cylinders; acetylene generators; filling ratios and developed pressures for different gases.
-
Liaison :ISO/TC 185 - Safety devices for protection against excessive pressure - Observer (O)
ISO/TC 220 - Cryogenic vessels - Observer (O)
ISO/TC 4 - Rolling bearings - Participating (P)
ISO TC 4/WG 25 - Cleanliness for rolling bearings
ISO/TC 58 - Gas cylinders - Participating (P)
ISO/TC 58/SC 2 - Cylinder fittings - Participating (P)
ISO TC 58/SC 2/WG 11 - Allocations of valve outlets
ISO TC 58/SC 2/WG 12 - Specification and test for LPG cylinder valves
ISO TC 58/SC 2/WG 14 - Inspection and maintenance of cylinder valves
ISO TC 58/SC 2/WG 4 - Valve stem and cylinder neck threads
ISO TC 58/SC 2/WG 6 - Gas cylinder valves - Specifications and testing
ISO TC 58/SC 2/WG 7 - Determination of properties of gases and gas mixtures
ISO/TC 58/SC 3 - Cylinder design - Participating (P)
ISO TC 58/SC 3/WG 17 - Compressed natural gas cylinders for road vehicles
ISO TC 58/SC 3/WG 21 - Refillable welded steel gas cylinders
ISO TC 58/SC 3/WG 24 - Factors of safety for composite cylinders
ISO TC 58/SC 3/WG 26 - Refillable seamless steel gas cylinders (except stainless steel)
ISO TC 58/SC 3/WG 27 - Composite cylinders
ISO TC 58/SC 3/WG 32 - Refillable composite reinforced tubes of water capacity between 150l and 3 000l ? Design, construction and testing
ISO TC 58/SC 3/WG 33 - Refillable seamless stainless steel gas cylinders
ISO TC 58/SC 3/WG 35 - Permanently mounted composite tubes
ISO TC 58/SC 3/WG 36 - Service life testing for cylinders and tubes
ISO/TC 58/SC 4 - Operational requirements for gas cylinders - Participating (P)
ISO TC 58/SC 4/WG 10 - Inspection and testing of composite cylinders
ISO TC 58/SC 4/WG 19 - Inspection of tubes and frames
ISO TC 58/SC 4/WG 6 - Cylinder identification
ISO TC 58/WG 10 - Fitting of valves to gas cylinders
ISO TC 58/WG 11 - Vocabulary - Participating (P)
ISO TC 58/WG 7 - Compatibility between gases and materials
|
IS 11006:2011 Reviewed In : 2021 |
Flash back arrestor (Flame Arrestor) - Specification (First Revision)
|
November, 2021
|
1
|
Indigenous
|
|
|
IS/ISO 11114-1:2020 ISO 11114-1:2020 Reviewed In : 2024 |
Gas Cylinders — Compatibility of Cylinder and Valve Materials with Gas Contents Part 1 Metallic Materials (First Revision)
|
December, 2024
|
-
|
Identical under single numbering
|
|
|
IS/ISO 11114-2:2013 ISO 11114-2 : 2000 Reviewed In : 2019 |
Transportable Gas Cylinders - Compatibility of Cylinder and Valve Materials with Gas Contents Part 2 Non-Metallic Materials (First Revision)
|
March, 2019
|
-
|
Identical under single numbering
|
|
|
IS/ISO 11114-2:2021 ISO 11114-2 : 2021 |
GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS: PART 2 NON-METALLIC MATERIALS (Second Revision)
|
-
|
Identical under single numbering
|
||
|
IS/ISO 11114-3:2010 ISO 11114-3 : 2010 Reviewed In : 2021 |
Gas cylinders - Compatibility of cylinder and valve materials with gas contents: Part 3 autogenous ignition test for non - Mettalic materials in oxygen atmosphere
|
November, 2021
|
-
|
Identical under single numbering
|
|
|
IS/ISO 11114-4:2017 IS/ISO 11114-4 : 2017 Reviewed In : 2025 |
Transportable Gas Cylinders ― Compatibility of Cylinder and Valve Materials with Gas Contents Part 4 Test Methods for Selecting Steels Resistant to Hydrogen Embrittlement (First Revision)
|
April, 2025
|
-
|
Identical under single numbering
|
|
|
IS/ISO 11119-1:2020 ISO 11119-1 : 2020 |
GAS CYLINDERS - DESIGN CONSTRUCTION AND TESTING OF REFILLABLE COMPOSITE GAS CYLINDERS AND TUBES PART 1 HOOP WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES UP TO 450 LITRES
|
-
|
Identical under single numbering
|
||
|
IS/ISO 11119-2:2020 ISO 11119-2 : 2020 |
Gas Cylinders � Design, Construction and Testing of Refillable Composite Gas Cylinders and Tubes Part 2 Fully Wrapped Fibre Reinforced Composite Gas Cylinders and Tubes up to 450 Litres with Load-Sharing Metal Liners
|
-
|
Identical under single numbering
|
||
|
IS/ISO 11119-3:2020 ISO 11119-3 : 2020 |
Gas Cylinders � Design, Construction and Testing of Refillable Composite Gas Cylinders and Tubes Part 3 Fully Wrapped Fibre Reinforced Composite Gas Cylinders and Tubes up to 450 Litres with Non-load-sharing Metallic or Non-metallic Liners or without Liners
|
-
|
Identical under single numbering
|
||
|
IS/ISO 11120:2015 ISO 11120 : 2015 |
GAS CYLINDERS REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3 000 L DESIGN CONSTRUCTION AND TESTING
|
-
|
Identical under single numbering
|
||
|
IS/ISO 11515:2022 ISO 11515 : 2022 |
GAS CYLINDERS REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3 000 L DESIGN CONSTRUCTION AND TESTING
|
-
|
Identical under single numbering
|
||
|
IS 12300:2024 |
Gas Cylinder Valves for Small Refrigerant Cylinders -Specification (First Revision)
|
1
|
Indigenous
|
||
|
IS 12586:2021 |
Brazed low carbon steel gas cylinders not exceeding 13 litre water capacity Specification
|
-
|
Indigenous
|
||
|
IS 12936:2017 Reviewed In : 2022 |
Basic requirements for delivery persons engaged in the delivery of LPG cylinders - Code of practice (First Revision)
|
July, 2022
|
-
|
Indigenous
|
|
|
IS 13258:2014 Reviewed In : 2024 |
Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gas - Requirements for inspection and reconditioning of used lpg cylinders (First Revision)
|
March, 2024
|
1
|
Indigenous
|
|
|
IS 13497:2017 Reviewed In : 2022 |
Fusible plug for dissolved acetylene gas cylinder - Specification (First Revision)
|
July, 2022
|
-
|
Indigenous
|
|
|
IS/ISO 13985:2006 Reviewed In : 2021 |
Liquid hydrogen - Land vehicle fuel tanks
|
November, 2021
|
-
|
Identical under single numbering
|
|
|
IS 14899:2014 Reviewed In : 2025 |
Liquefied petroleum gas (LPG) containers for automotive use - Specification (First Revision)
|
April, 2025
|
-
|
Not Equivalent
|
|
|
IS 15100:2018 Reviewed In : 2023 |
Multi - Function valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use - Specification (First Revision)
|
March, 2023
|
-
|
Not Equivalent
|
|
|
IS 15190 (Part 1):2002 Reviewed In : 2022 |
Acetylene pipelines - Code of practice: Part 1 for pressures up to 155 kPa (G)
|
October, 2022
|
-
|
Not Equivalent
|
|
|
IS 15190 (Part 2):2002 Reviewed In : 2022 |
Acetylene pipelines - Code of practice: Part 2 for pressures from 155 kPa (G) to 2550 kPa (G)
|
October, 2022
|
-
|
Not Equivalent
|
|
|
IS 15490:2017 Reviewed In : 2022 |
Seamless steel cylinders for on - Board storage of compressed natural gas as a fuel for automotive vehicles - Specification (First Revision)
|
March, 2022
|
1
|
Not Equivalent
|
|
|
IS 15637:2006 Reviewed In : 2025 |
Welded stainless steel cylinders for liquefied petroleum gases (LPG) from 0.5 litre to 250 litre water capacity - Specification
|
May, 2025
|
1
|
Not Equivalent
|
|
|
IS 15660:2017 Reviewed In : 2022 |
Refillable transportable seamless aluminium alloy gas cylinders - Specification (First Revision)
|
March, 2022
|
2
|
Not Equivalent
|
|
|
IS 15894:2018 Reviewed In : 2024 |
Inspection gauges for checking taper threads of gas cylinder valves and cylinder necks - Taper 1 in 16 on diameter - Specification (First Revision)
|
January, 2024
|
1
|
Indigenous
|
|
|
IS 15935:2021 |
Composite Cylinders for On-Board Storage of Compressed Natural Gas ( CNG ) as a Fuel for Automotive Vehicle - Specification ( First Revision )
|
-
|
Indigenous
|
||
|
IS 15966:2013 Reviewed In : 2022 |
Refillable welded steel cylinder for liquefied petroleum gas (LPG) - Procedure for checking before, during and after filling
|
October, 2022
|
-
|
Not Equivalent
|
|
|
IS 15975:2020 Reviewed In : 2024 |
Gas Cylinders — Conditions for Filling Gas Cylinders ( First Revision )
|
December, 2024
|
-
|
Indigenous
|
|
|
IS 16017:2024 |
Transportable Gas Cylinders — Periodic Inspection and Testing of Seamless Aluminium Alloy Gas Cylinders (First Revision)
|
-
|
Not Equivalent
|
||
|
IS 16050:2020 ISO 24431 : 2016 Reviewed In : 2025 |
Gas Cylinders — Seamless, Welded and Composite Cylinders for Compressed and Liquefied Gases ( Excluding Acetylene ) — Inspection at Time of Filling ( First Revision )
|
May, 2025
|
-
|
Indigenous
|
|
|
IS 16054:2013 Reviewed In : 2024 |
Periodic inspection and testing - Welded low carbon steel cylinders exceeding 5 - Litre water capacity for liquified petroleum gas (Lpg) - Code of practice
|
January, 2024
|
-
|
Not Equivalent
|
|
|
IS 16175:2014 Reviewed In : 2024 |
Periodic inspection and requalification - Liquefied petroleum gas (LPG) cylinders for automotive use - Code of practice
|
January, 2024
|
-
|
Indigenous
|
|
|
IS 16185:2014 Reviewed In : 2024 |
Periodic inspection and testing - Welded carbon steel gas cylinders - Code of practice
|
January, 2024
|
-
|
Not Equivalent
|
|
|
IS 16271:2014 Reviewed In : 2024 |
Dissolved acetylene gas cylinders - Inspection at time of filling - Code of practice
|
January, 2024
|
-
|
Not Equivalent
|
|
|
IS 16280:2021 |
High Pressure Regulators and Adaptors for Use with Liquefied Petroleum Gases (LPG) — Specification (First Revision)
|
-
|
Indigenous
|
||
|
IS 16299:2014 Reviewed In : 2024 |
Periodic inspection and requalification - High pressure steel cylinders for the on - Board storage of compressed natural gas as a fuel for automotive vehicles, cylinders for hcng blends and cng cascade cylinders - Code of practice
|
January, 2024
|
-
|
Indigenous
|
|
|
IS 16484:2017 Reviewed In : 2022 |
Liquid off - Take valve fitting to gas cylinders or tanks (Mobile Or Static) for liquid petroleum gas (LPG) - Specification
|
March, 2022
|
1
|
Not Equivalent
|
|
|
IS 16485:2020 ISO 16852 : 2016 Reviewed In : 2024 |
Flame Arresters — Performance Requirements, Test Methods and Limits for Use ( First Revision )
|
December, 2024
|
-
|
Indigenous
|
|
|
IS 16507:2017 Reviewed In : 2022 |
Transportable gas cylinders cascade - Specification
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 16646:2017 Reviewed In : 2022 |
Transportable refillable fully wrapped composite cylinders for liquefied petroleum gas (LPG) - Specification
|
March, 2022
|
-
|
Not Equivalent
|
|
|
IS 16735:2018 Reviewed In : 2024 |
Cylinders for on - Board Storage of Compressed Gasesous Hydrogen and Hydrogen Blends as a Fuel for Automative Vehicles - Specification
|
February, 2024
|
-
|
Not Equivalent
|
|
|
IS 16742:2018 ISO 12991 : 2012 Reviewed In : 2023 |
Liquefied natural gas (LNG) - Tanks for on - Board storage as a fuel for automotive vehicles
|
December, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16988:2018 Reviewed In : 2024 |
Compressed natural gas cylinder valve integrated with solenoid operation (Remotely Controlled) for automotive use - Specification
|
March, 2024
|
2
|
Indigenous
|
|
|
IS 17613:2021 |
GAS CYLINDERS REFILLABLE WELDED ALUMINIUM ALLOY CYLINDERS DESIGN CONSTRUCTION AND TESTING
|
-
|
Not Equivalent
|
||
|
IS 18272:2023 |
Residual pressure valves and type testing of cylinder valves incorporating residual pressure devices � Specification
|
-
|
Indigenous
|
||
|
IS 18608:2024 |
CRYOGENIC VESSELS � VALVES FOR CRYOGENIC VESSELS
|
-
|
Indigenous
|
||
|
IS 18719 (Part 1):2024 IS 18719 (Part 1): 2024/ ISO 21029-1: 2018 |
Cryogenic Vessels � Transportable Vacuum Insulated Vessels of not More than 1 000 Litres Volume Part 1 Design, Fabrication, Inspection and Tests
|
-
|
Identical under dual numbering
|
||
|
IS 18719 (Part 2):2024 |
Cryogenic Vessels � Transportable Vacuum Insulated Vessels of not more than 1 000 Litres Part 2 Operational Requirements
|
-
|
Not Equivalent
|
||
|
IS 19060 (Part 1):2024 |
CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS PART 1 DESIGN FABRICATION INSPECTION AND TESTING (Modified Adoption of ISO 20421-1)
|
-
|
Modified/Technically Equivalent
|
||
|
IS 19138:2025 |
Welded Low Carbon Steel Containers above 250 Litre and not Exceeding 1 000 Litre Water Capacity for the Transport of LPG � Specification
|
-
|
Indigenous
|
||
|
IS 3196 (Part 1):2013 Reviewed In : 2024 |
Welded low carbon steel cylinders exceeding 5 litres water capacity for low pressure liquefiable gases: Part 1 cylinders for liquefied petroleum gases (Lpg) - Specification (Sixth Revision)
|
March, 2024
|
4
|
Not Equivalent
|
|
|
IS 3196 (Part 2):2006 Reviewed In : 2025 |
Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases: Part 2 cylinders for liquefiable non - Toxic gases other than lpg - Specification (First Revision)
|
May, 2025
|
3
|
Not Equivalent
|
|
|
IS 3196 (Part 3):2012 Reviewed In : 2022 |
Welded low carbon steel cylinder exceeding 5 litre water capacity for low pressure liquefiable gases: Part 3 methods of test (Fifth Revision)
|
October, 2022
|
2
|
Not Equivalent
|
|
|
IS 3196 (Part 4):2001 Reviewed In : 2021 |
Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases - Specification: Part 4 cylinders for toxic and corrosive gases
|
November, 2021
|
2
|
Indigenous
|
|
|
IS 3224:2002 Reviewed In : 2017 |
Valve fittings for compressed gas cylinders excluding liquefied petroleum gas (LPG) cylinders - Specification (Third Revision)
|
November, 2017
|
3
|
Not Equivalent
|
|
|
IS 3224:2021 |
Valve for compressed gas cylinders excluding liquefied petroleum gas (LPG) cylinders - Specification (fourth revision)
|
2
|
Not Equivalent
|
||
|
IS 3710:1978 Reviewed In : 2020 |
Filling ratios for low pressure liquefiable gases contained in cylinders (First Revision)
|
March, 2020
|
1
|
Not Equivalent
|
|
|
IS 3745:2024 |
Yoke Type Medical Cylinder Valve with Pin Index Connection ( Third Revision )
|
-
|
Indigenous
|
||
|
IS 3933:2021 |
Colour Identification of Gas Cylinders and Related Equipment Intended for Medical Use (First Revision)
|
-
|
Not Equivalent
|
||
|
IS 4152:2011 Reviewed In : 2021 |
Seamless carbon dioxide cylinders for fire fighting purposes on boardship - Specification (Third Revision)
|
November, 2021
|
-
|
Not Equivalent
|
|
|
IS 4379:2021 |
Identification of the Contents of Industrial Gas Cylinders (Second Revision)
|
-
|
Indigenous
|
||
|
IS 5844:2014 Reviewed In : 2024 |
Hydrostatic stretch testing of compressed gas cylinders - Recommendations (First Revision)
|
January, 2024
|
-
|
Indigenous
|
|
|
IS 5845:2024 |
Inspection of Low Pressure Welded Steel Gas Cylinders Other than LPG Cylinders in Use — Code of Practice (Third Revision)
|
-
|
Indigenous
|
||
|
IS 5903:2025 |
Types of Safety Device for Gas Cylinders and Gas Cylinder Valves ( Second Revision )
|
-
|
Indigenous
|
||
|
IS 5903:2014 Reviewed In : 2024 |
Recommendation for safety devices for gas cylinders (First Revision)
|
March, 2024
|
3
|
Indigenous
|
|
|
IS 6044 (Part 1):2018 Reviewed In : 2024 |
Liquefied petroleum gas storage installations - Code of practice: Part 1 residential, commercial and industrial cylinder installations (Third Revision)
|
January, 2024
|
-
|
Indigenous
|
|
|
IS 6044 (Part 2):2021 |
LIQUEFIED PETROLEUM GAS STORAGE INSTALLATIONS CODE OF PRACTICE PART 2 COMMERCIAL INDUSTRIAL AND DOMESTIC BULK STORAGE INSTALLATIONS
|
-
|
Indigenous
|
||
|
IS 7142:2025 |
Welded Low Carbon Steel Cylinders for Low Pressure Liquefiable Gases not exceeding 5 Litre Water Capacity - Specification ( Second Revision )
|
-
|
Indigenous
|
||
|
IS 7142:1995 Reviewed In : 2024 |
Welded low carbon steel cylinders for low pressure liquifiable gases not exceeding 5 litre water capacity - Specification (First Revision)
|
December, 2024
|
1
|
Indigenous
|
|
|
IS 7202:2017 Reviewed In : 2022 |
Inspection gauges for checking type 4 (Size 1, 2, 3) taper threads of gas cylinder valves and cylinder necks - Specification (First Revision)
|
October, 2022
|
-
|
Indigenous
|
|
|
IS 7241:2024 |
Gas Cylinder Technology — Glossary of Terms (Second Revision)
|
-
|
Indigenous
|
||
|
IS 7285 (Part 1):2018 Reviewed In : 2022 |
Refillable seamless steel gas cylinders - Specification: Part 1 normalized steel cylinders (Fourth Revision)
|
October, 2022
|
2
|
Indigenous
|
|
|
IS 7285 (Part 2):2017 Reviewed In : 2022 |
Refillable seamless steel gas cylinders - Specification: Part 2 quenched and tempered steel cylinders with tensile strength less than 1 100 mpa (112 Kgf/mm²) (Fourth Revision)
|
October, 2022
|
1
|
Not Equivalent
|
|
|
IS 7302:2018 Reviewed In : 2022 |
Valve fittings for self contained breathing apparatus (SCBA) and self contained underwater breathing apparatus (SCUBA) - Specification (First Revision)
|
October, 2022
|
1
|
Not Equivalent
|
|
|
IS 7312:2018 Reviewed In : 2024 |
Welded and seamless steel dissolved acetylene gas cylinders - Specification (Third Revision)
|
March, 2024
|
1
|
Not Equivalent
|
|
|
IS 8198:2004 Reviewed In : 2024 |
Steel cylinders for compressed gases (Atmospheric gases, hydrogen, high pressure liquefiable gases and dissolved acetylene gases) - Code of practice
|
March, 2024
|
-
|
Indigenous
|
|
|
IS 8198 (Part 5):2022 |
CODE OF PRACTICE FOR STEEL CYLINDERS FOR COMPRESSED GASES PART 5: LIQUEFIED PETROLEUM GAS LPG
|
-
|
Indigenous
|
||
|
IS 8198 (Part 6):2025 |
STEEL CYLINDERS FOR COMPRESSED GASES - CODE OF PRACTICE PART 6 LIQUEFIED CHLORINE GAS (Second Revision )
|
-
|
Indigenous
|
||
|
IS 8198 (Part 6):1988 Reviewed In : 2022 |
Code of practice for steel cylinders for compressed gases Part 6 Liquefied chlorine gas
|
October, 2022
|
-
|
Indigenous
|
|
|
IS 8198 (Part 7):2024 |
Steel Cylinders for Compressed Gases � Code of Practice Part 7 Ammonia Gas ( Second Revision )
|
-
|
Indigenous
|
||
|
IS 8198 (Part 8):2024 |
Steel Cylinders for Compressed Gases � Code of Practice Part 8 Common Organic Refrigerant Gases ( Second Revision )
|
-
|
Indigenous
|
||
|
IS 8198 (Part 9):2024 |
Steel Cylinders for Compressed Gases � Code of Practice Part 9 Sulphur Dioxide Gas ( Second Revision )
|
-
|
Indigenous
|
||
|
IS 8198 (Part 10):2024 |
Steel Cylinders for Compressed Gases � Code of Practice Part 10 Methyl Bromide Gas ( First Revision )
|
-
|
Indigenous
|
||
|
IS 8198 (Part 11):2024 |
Steel Cylinders for Compressed Gases — Code of Practice Part 11 Methyl Chloride Gas (Second Revision)
|
-
|
Indigenous
|
||
|
IS 8198 (Part 12):2024 |
Steel Cylinders for Compressed Gases � Code of Practice Part 12 Gases for Medical Use ( First Revision )
|
-
|
Indigenous
|
||
|
IS 8433:2017 Reviewed In : 2021 |
Periodic inspection and maintenance of dissolved acetylene gas cylinders - Code of practice (Second Revision)
|
November, 2021
|
-
|
Not Equivalent
|
|
|
IS 8451:2018 Reviewed In : 2024 |
Periodic inspection and testing of seamless steel gas cylinders - Code of practice (Third Revision)
|
January, 2024
|
-
|
Not Equivalent
|
|
|
IS 8452:1977 Reviewed In : 2021 |
Glossary of terms used in acetylene generators
|
November, 2021
|
-
|
Indigenous
|
|
|
IS 8471:2003 Reviewed In : 2024 |
Acetylene generators - Requirements (First Revision)
|
March, 2024
|
1
|
Indigenous
|
|
|
IS 8737:2017 NONE Reviewed In : 2022 |
Valve Fittings for Use with Liquefied Petroleum Gas (LPG) of upto 250 litre Water Capacity - Specification (Second Revision)
|
October, 2022
|
3
|
Not Equivalent
|
|
|
IS 8775:1978 Reviewed In : 2022 |
Filling pressure and corresponding developed pressure for permanent gases contained in cylinders
|
October, 2022
|
-
|
Not Equivalent
|
|
|
IS 8776:2024 |
Valve Fittings for Use With Liquefied Petroleum Gas (LPG) Cylinders up to and Including 13 Litre Water Capacity - Specification (Second Revision)
|
-
|
Indigenous
|
||
|
SP 9:1973 Reviewed In : 2020 |
Technical data sheet for gases conveyed in cylinders
|
March, 2020
|
2
|
Indigenous
|
|
|
IS 9122:2023 |
Inspection Gauges for Checking Type 2 Taper Thread of Gas Cylinder Valves, Taper 3 in 25 — Specification (Second Revision)
|
-
|
Not Equivalent
|
||
|
IS 9200:2021 |
METHODS OF DISPOSAL OF UNSERVICEABLE COMPRESSED GAS CYLINDERS CODE OF PRACTICE
|
-
|
Indigenous
|
||
|
IS 9639:2017 Reviewed In : 2022 |
Visual inspection of low pressure welded steel gas cylinders during manufacture - Code of practice (First Revision)
|
October, 2022
|
-
|
Indigenous
|
|
|
IS 9798:2013 Reviewed In : 2023 |
Low pressure regulators for use with liquefied petroleum gas (LPG) - Specification (Second Revision)
|
November, 2023
|
3
|
Not Equivalent
|
|
|
IS/ISO 9809-2:2019 ISO 9809-2 : 2019 |
GAS CYLINDERS DESIGN CONSTRUCTIION AND TESTING OF REFILLABLE SEAMLESS STEEL GAS CYLINDERS AND TUBES PART 2 QUENCHED AND TEMPERED STEEL CYLINDERS AND TUBES WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1 100 MPA
|
-
|
Identical under single numbering
|
| No Records Found |
|
MED 16 (27636)
|
Seamless steel cylinders for on - Board storage of compressed natural gas as a fuel for automotive vehicles - Specification First Revision Amendment - 2 |
| No Records Found |
|
MED 16 (22407)
|
Gas Cylinders-- Conditions for Filling Gas Cylinders First Revision Amendment - 1 |
|
|
MED 16 (24459)
|
GAS CYLINDERS REFILLABLE WELDED ALUMINIUM ALLOY CYLINDERS DESIGN CONSTRUCTION AND TESTING Amendment - 1 |
|
|
MED 16 (25227)
|
COMPRESSED GASEOUS HYDROGEN CGH2 AND HYDROGENNATURAL GAS BLENDS VALVE INTEGRATED WITH SOLENOID OPERATION REMOTELY CONTROLLED FOR AUTOMOTIVE USE - SPECIFICATION |
|
|
MED 16 (25978)
|
LIGHT GAUGE METAL CONTAINERS NON-REFILLABLE LPG CARTRIDGES GENERAL REQUIREMENTS |
|
|
MED 16 (27407)
|
Identification of the Contents of Industrial Gas Cylinders Second Revision Amendment - 1 |
|
|
MED 16 (27703)
|
Gas Cylinders - Compatibility of Cylinder and Valve Materials with Gas Contents Part 1 Metallic Materials First Revision Amendment - 1 |
|
|
MED 16 (27705)
|
PRESSURE RELIEF VALVES FOR CYLINDER VALVES AND FOR TRANSPORTABLE REFILLABLE CYLINDERS |
|
|
MED 16 (27872)
Revision of: IS 16646:2017 |
TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LIQUEFIED PETROLEUM GAS LPG SPECIFICATION |
| No Records Found | ||
|
MED 16 (16990)
|
Liquefied petroleum gas storage installations - Code of practice Part 1 residential commercial and industrial cylinder installations Third Revision Amendment - 1 |
|
|
IS 15737:2006 ISO 10463 Reviewed In : 2016 |
Cylinders for permanent gases - inspection at time of filling |
|
|
IS 2872:1967 |
Low carbon steel cylinders for the storage and transportation of liquefiable gases |
|
|
IS 3870:1966 |
Code of practice for handling gas cylinders and related equipment intended for medical use |
|
|
IS 4093:1981 Reviewed In : 2002 |
Non-refillable liquefied petroleum gas containers |
|
|
IS 4784:1968 |
Low Pressure Regulators for Use with Butane Gas |
|
|
IS 4785:1968 |
Low Pressure Regulators for Use with Propane gas |
|
|
IS 4786:2014 Reviewed In : 2019 |
Variable high pressure regulators VHPR for use with liquefied petroleum gases - Specification First Revision |
|
|
IS 7285:1988 Reviewed In : 2002 |
Seamless Steel Cylinders for Permanent and High Pressure Liquefiable Gases |
|
|
IS 7311:1974 |
Seamless high carbon steel cylinders for permanent and high pressure liquefiable gases |
|
|
IS 7312:1993 Reviewed In : 2013 |
Welded and seamless steel dissolved acetylene gas cylinders |
|
|
IS 7680:1985 Reviewed In : 1991 |
Welded Low Carbon Steel Gas Cylinders for Ammonia Anhydrous Gas |
|
|
IS 7681:1985 Reviewed In : 1991 |
Welded Low Carbon Steel Gas Cylinders for Chlorine Gas |
|
|
IS 7682:1985 Reviewed In : 1996 |
Welded Low Carbon Steel Gas Cylinders for Methyl Bromide Gas |
|
|
IS 8198 (Part 1):1984 Reviewed In : 2000 |
Code of practice for steel cylinders for compressed gases Part 1 Atmospheric gases |
|
|
IS 8198 (Part 2):1984 Reviewed In : 2000 |
Code of practice for steel cylinders for compressed gases Part 2 Hydrogen gas |
|
|
IS 8198 (Part 3):1984 Reviewed In : 2000 |
Code of practice for steel cylinders for compressed gases Part 3 High pressure liquefiable gases |
|
|
IS 8198 (Part 4):1984 Reviewed In : 2000 |
Code of practice for steel cylinders for compressed gases Part 4 Dissolved acetylene gas |
|
|
IS 8471 (Part 1):1977 Reviewed In : 2008 |
Requirements for acetylene generators Part 1 Low pressure stationary of water to-carbide and carbide to water type |
|
|
IS 8471 (Part 2):1977 Reviewed In : 2008 |
Requirements for acetylene generators Part 2 Low pressure portable of water-to-carbide type |
|
|
IS 8471 (Part 3):1977 Reviewed In : 2008 |
Requirements for acetylene generators Part 3 Low pressure portable of carbide-to-water type |
|
|
IS 8471 (Part 4):1977 Reviewed In : 2008 |
Requirements for acetylene generators Part 4 Medium pressure stationary of water-to-carbide and carbide-to-water type |
|
|
IS 8471 (Part 5):1977 Reviewed In : 2008 |
Requirements for acetylene generators Part 5 Medium pressure portable of water-to-carbide and carbide-to-water type |
|
|
IS 8866:1978 Reviewed In : 2007 |
Filling ratios and corresponding developed pressure for high pressure liquefiable gases contained in gas cylinder |
|
|
IS 8867:1978 Reviewed In : 2007 |
Saturated vapour pressure and test pressure for low pressure liquefiable gases contained in gas cylinders |
|
|
IS 8868:1988 Reviewed In : 2007 |
Periodical inspection interval of gas cylinders in use |
|
|
IS 9121:2005 Reviewed In : 2010 |
Inspection Gauges for Checking Type 1 Size 2 Taper Threads of Gas Cylinder Valves Taper 1 in 16 |
|
|
IS 9199:1979 Reviewed In : 2007 |
Inspection Gauges for Checking Type 3 Taper Threads of Gas Cylinder Valves Taper 6 Included Angle |
|
|
IS 9687:1980 Reviewed In : 2010 |
Inspection Gauges for Checking Type 1 Size 1 Taper Threads of Gas Cylinder Valves Taper 1 in 16 |
|
IS 11006:2011 Reviewed In : 2021 |
Flash back arrestor Flame Arrestor - Specification First Revision |
|
|
IS/ISO 11114-1:2020 ISO 11114-1:2020 Reviewed In : 2024 |
Gas Cylinders Compatibility of Cylinder and Valve Materials with Gas Contents Part 1 Metallic Materials First Revision |
|
|
IS/ISO 11119-1:2020 ISO 11119-1 : 2020 |
GAS CYLINDERS - DESIGN CONSTRUCTION AND TESTING OF REFILLABLE COMPOSITE GAS CYLINDERS AND TUBES PART 1 HOOP WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES UP TO 450 LITRES |
|
|
IS/ISO 11119-2:2020 ISO 11119-2 : 2020 |
Gas Cylinders Design Construction and Testing of Refillable Composite Gas Cylinders and Tubes Part 2 Fully Wrapped Fibre Reinforced Composite Gas Cylinders and Tubes up to 450 Litres with Load-Sharing Metal Liners |
|
|
IS/ISO 11119-3:2020 ISO 11119-3 : 2020 |
Gas Cylinders Design Construction and Testing of Refillable Composite Gas Cylinders and Tubes Part 3 Fully Wrapped Fibre Reinforced Composite Gas Cylinders and Tubes up to 450 Litres with Non-load-sharing Metallic or Non-metallic Liners or without Liners |
|
|
IS/ISO 11120:2015 ISO 11120 : 2015 |
GAS CYLINDERS REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3 000 L DESIGN CONSTRUCTION AND TESTING |
|
|
IS/ISO 11515:2022 ISO 11515 : 2022 |
GAS CYLINDERS REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3 000 L DESIGN CONSTRUCTION AND TESTING |
|
|
IS 12300:2024 |
Gas Cylinder Valves for Small Refrigerant Cylinders -Specification First Revision |
|
|
IS 12586:2021 |
Brazed low carbon steel gas cylinders not exceeding 13 litre water capacity Specification |
|
|
IS 13497:2017 Reviewed In : 2022 |
Fusible plug for dissolved acetylene gas cylinder - Specification First Revision |
|
|
IS/ISO 13985:2006 Reviewed In : 2021 |
Liquid hydrogen - Land vehicle fuel tanks |
|
|
IS 14899:2014 Reviewed In : 2025 |
Liquefied petroleum gas LPG containers for automotive use - Specification First Revision |
|
|
IS 15100:2018 Reviewed In : 2023 |
Multi - Function valve assembly for permanently fixed liquefied petroleum gas LPG containers for automotive use - Specification First Revision |
|
|
IS 15490:2017 Reviewed In : 2022 |
Seamless steel cylinders for on - Board storage of compressed natural gas as a fuel for automotive vehicles - Specification First Revision |
|
|
IS 15637:2006 Reviewed In : 2025 |
Welded stainless steel cylinders for liquefied petroleum gases LPG from 0 5 litre to 250 litre water capacity - Specification |
|
|
IS 15660:2017 Reviewed In : 2022 |
Refillable transportable seamless aluminium alloy gas cylinders - Specification First Revision |
|
|
IS 15894:2018 Reviewed In : 2024 |
Inspection gauges for checking taper threads of gas cylinder valves and cylinder necks - Taper 1 in 16 on diameter - Specification First Revision |
|
|
IS 15935:2021 |
Composite Cylinders for On-Board Storage of Compressed Natural Gas CNG as a Fuel for Automotive Vehicle - Specification First Revision |
|
|
IS 16280:2021 |
High Pressure Regulators and Adaptors for Use with Liquefied Petroleum Gases LPG Specification First Revision |
|
|
IS 16484:2017 Reviewed In : 2022 |
Liquid off - Take valve fitting to gas cylinders or tanks Mobile Or Static for liquid petroleum gas LPG - Specification |
|
|
IS 16485:2020 ISO 16852 : 2016 Reviewed In : 2024 |
Flame Arresters Performance Requirements Test Methods and Limits for Use First Revision |
|
|
IS 16507:2017 Reviewed In : 2022 |
Transportable gas cylinders cascade - Specification |
|
|
IS 16646:2017 Reviewed In : 2022 |
Transportable refillable fully wrapped composite cylinders for liquefied petroleum gas LPG - Specification |
|
|
IS 16735:2018 Reviewed In : 2024 |
Cylinders for on - Board Storage of Compressed Gasesous Hydrogen and Hydrogen Blends as a Fuel for Automative Vehicles - Specification |
|
|
IS 16742:2018 ISO 12991 : 2012 Reviewed In : 2023 |
Liquefied natural gas LNG - Tanks for on - Board storage as a fuel for automotive vehicles |
|
|
IS 16988:2018 Reviewed In : 2024 |
Compressed natural gas cylinder valve integrated with solenoid operation Remotely Controlled for automotive use - Specification |
|
|
IS 17613:2021 |
GAS CYLINDERS REFILLABLE WELDED ALUMINIUM ALLOY CYLINDERS DESIGN CONSTRUCTION AND TESTING |
|
|
IS 18272:2023 |
Residual pressure valves and type testing of cylinder valves incorporating residual pressure devices Specification |
|
|
IS 18608:2024 |
CRYOGENIC VESSELS VALVES FOR CRYOGENIC VESSELS |
|
|
IS 18719 (Part 1):2024 IS 18719 (Part 1): 2024/ ISO 21029-1: 2018 |
Cryogenic Vessels Transportable Vacuum Insulated Vessels of not More than 1 000 Litres Volume Part 1 Design Fabrication Inspection and Tests |
|
|
IS 19060 (Part 1):2024 |
CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS PART 1 DESIGN FABRICATION INSPECTION AND TESTING Modified Adoption of ISO 20421-1 |
|
|
IS 19138:2025 |
Welded Low Carbon Steel Containers above 250 Litre and not Exceeding 1 000 Litre Water Capacity for the Transport of LPG Specification |
|
|
IS 3196 (Part 1):2013 Reviewed In : 2024 |
Welded low carbon steel cylinders exceeding 5 litres water capacity for low pressure liquefiable gases Part 1 cylinders for liquefied petroleum gases Lpg - Specification Sixth Revision |
|
|
IS 3196 (Part 2):2006 Reviewed In : 2025 |
Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases Part 2 cylinders for liquefiable non - Toxic gases other than lpg - Specification First Revision |
|
|
IS 3196 (Part 4):2001 Reviewed In : 2021 |
Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases - Specification Part 4 cylinders for toxic and corrosive gases |
|
|
IS 3224:2021 |
Valve for compressed gas cylinders excluding liquefied petroleum gas LPG cylinders - Specification fourth revision |
|
|
IS 3710:1978 Reviewed In : 2020 |
Filling ratios for low pressure liquefiable gases contained in cylinders First Revision |
|
|
IS 3745:2024 |
Yoke Type Medical Cylinder Valve with Pin Index Connection Third Revision |
|
|
IS 4152:2011 Reviewed In : 2021 |
Seamless carbon dioxide cylinders for fire fighting purposes on boardship - Specification Third Revision |
|
|
IS 5903:2025 |
Types of Safety Device for Gas Cylinders and Gas Cylinder Valves Second Revision |
|
|
IS 7142:2025 |
Welded Low Carbon Steel Cylinders for Low Pressure Liquefiable Gases not exceeding 5 Litre Water Capacity - Specification Second Revision |
|
|
IS 7202:2017 Reviewed In : 2022 |
Inspection gauges for checking type 4 Size 1 2 3 taper threads of gas cylinder valves and cylinder necks - Specification First Revision |
|
|
IS 7285 (Part 1):2018 Reviewed In : 2022 |
Refillable seamless steel gas cylinders - Specification Part 1 normalized steel cylinders Fourth Revision |
|
|
IS 7285 (Part 2):2017 Reviewed In : 2022 |
Refillable seamless steel gas cylinders - Specification Part 2 quenched and tempered steel cylinders with tensile strength less than 1 100 mpa 112 Kgf mm sup2 Fourth Revision |
|
|
IS 7302:2018 Reviewed In : 2022 |
Valve fittings for self contained breathing apparatus SCBA and self contained underwater breathing apparatus SCUBA - Specification First Revision |
|
|
IS 8471:2003 Reviewed In : 2024 |
Acetylene generators - Requirements First Revision |
|
|
IS 8737:2017 NONE Reviewed In : 2022 |
Valve Fittings for Use with Liquefied Petroleum Gas LPG of upto 250 litre Water Capacity - Specification Second Revision |
|
|
IS 8776:2024 |
Valve Fittings for Use With Liquefied Petroleum Gas LPG Cylinders up to and Including 13 Litre Water Capacity - Specification Second Revision |
|
|
IS 9122:2023 |
Inspection Gauges for Checking Type 2 Taper Thread of Gas Cylinder Valves Taper 3 in 25 Specification Second Revision |
|
|
IS 9798:2013 Reviewed In : 2023 |
Low pressure regulators for use with liquefied petroleum gas LPG - Specification Second Revision |
|
|
IS/ISO 9809-2:2019 ISO 9809-2 : 2019 |
GAS CYLINDERS DESIGN CONSTRUCTIION AND TESTING OF REFILLABLE SEAMLESS STEEL GAS CYLINDERS AND TUBES PART 2 QUENCHED AND TEMPERED STEEL CYLINDERS AND TUBES WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1 100 MPA |