Programme of work

BUREAU OF INDIAN STANDARDS

Petroleum, Coal and Related Products Department

Programme of Work

PCD27 : Methods of Sampling and Test for Plastics

Scope : To formulate Indian Standards for terminology, methods of sampling and test for plastics.
Liaison :

ISO/TC 61/SC 1 - Terminology - Participating (P)
ISO/TC 61/SC 1/WG 1 - Terms and definitions
ISO/TC 61/SC 1/WG 3
ISO/TC 61/SC 10 - Cellular plastics - Participating (P)
ISO/TC 61/SC 10/WG 10 - Plastic insulation
ISO/TC 61/SC 10/WG 11 - Physical and chemical properties
ISO/TC 61/SC 10/WG 12 - Mechanical and endurance properties
ISO/TC 61/SC 10/WG 14 - Products and materials
ISO/TC 61/SC 11/WG 13 - Fiber reinforced plastics modular framework
ISO/TC 61/SC 11/WG 5 - Polymeric adhesives
ISO/TC 61/SC 12 - Thermosetting materials - Participating (P)
ISO/TC 61/SC 12/WG 5 - Unsaturated polyesters, epoxy resins and other resins
ISO/TC 61/SC 12/WG 6 - Polyurethane raw materials
ISO/TC 61/SC 13/WG 1 - Reinforcements and reinforcement products
ISO/TC 61/SC 13/WG 2 - Laminates and moulding compounds
ISO/TC 61/SC 13/WG 7 - Composites and metal assemblies
ISO/TC 61/SC 14/WG 1 - Terminology, classifications and general guidance
ISO/TC 61/SC 14/WG 2 - Biodegradability
ISO/TC 61/SC 14/WG 3 - Biobased plastics
ISO/TC 61/SC 14/WG 4 - Characterization of plastics leaked into the environment (including microplastics) and quality control criteria of respective methods
ISO/TC 61/SC 14/WG 5 - Mechanical and chemical recycling
ISO/TC 61/SC 2/WG 1 - Static behavior
ISO/TC 61/SC 2/WG 2 - Hardness and surface properties
ISO/TC 61/SC 2/WG 3 - Impact and high speed properties
ISO/TC 61/SC 2/WG 5 - Temperature dependent behavior
ISO/TC 61/SC 4 - Burning behaviour - Participating (P)
ISO/TC 61/SC 4/WG 2 - Smoke opacity and corrosivity
ISO/TC 61/SC 4/WG 8 - Ignitability and fire growth
ISO/TC 61/SC 4/WG 9 - Composites and semi-finished products
ISO/TC 61/SC 5 - Physical-chemical properties - Participating (P)
ISO/TC 61/SC 5/WG 11 - Analytical methods
ISO/TC 61/SC 6 - Ageing, chemical and environmental resistance - Participating (P)
ISO/TC 61/SC 6/WG 2 - Exposure to light
ISO/TC 61/SC 6/WG 3 - Various exposures
ISO/TC 61/SC 9/WG 18 - Preparation of test specimens
ISO/TC 61/SC 9/WG 20 - Poly(vinyl chloride)
ISO/TC 61/SC 9/WG 26 - Thermoplastic elastomers
ISO TC 61/SC 2 - Mechanical behavior - Participating (P)
ISO TC 61/SC 9 - Thermoplastic materials - Participating (P)
ISO TC 61/SC 11 - Products - Participating (P)
ISO TC 61/SC 13 - Composites and reinforcement fibres - Participating (P)
ISO TC 61/SC 14 - Environmental aspects - Participating (P)

Published Standards

SI. No.	IS No.	Title	Reaffirmation Details	No. of Amendments	Degree of Equivalence
1.	IS 11022:2025 ISO 9665 : 1998	METHODS OF SAMPLING AND TEST FOR GLUES, BONE, SKIN/FLESHINGS AND FISH GLUES (First Revision)		-	Identical under dual numbering
2.	IS 13055:2024	Methods of sampling and test for anaerobic adhesives and sealants (First Revision)		-	Indigenous
3.	IS 13360 (Part 5/Sec 11):2013 ISO 868 : 2003	Plastics - Methods of testing: Part 5 mechanical properties section 11 determination of indentation hardness by means of durometer (Shore Hardness) (First Revision)	February, 2023	-	Identical under dual numbering
4.	IS 13360 (Part 5/Sec 8):2013 ISO 604 : 2002	Plastics - Methods of testing: Part 5 mechanical properties section 8 determination of compressive properties (First Revision)	February, 2023	-	Identical under dual numbering
5.	IS 13360 (Part 3/Sec 12):2016 ISO 1183-3 : 1999	Plastics - Methods of testing: Part 3 physical and dimensional properties section 12 determination of density of non - Cellular plastics - Gas pyknometer method	April, 2021	-	Identical under dual numbering
6.	IS 13360 (Part 8/Sec 9):2022 ISO 22088-3 : 2006	PLASTICS - METHODS OF TESTING PART 8 PERMANENCECHEMICAL PROPERTIES SECTION 9 DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC BENT STRIP METHOD		-	Identical under dual numbering
7.	IS 13360 (Part 11/Sec 9):2023 ISO 1628-1 : 2021	PLASTICS METHODS OF TEST PART 11 SPECIAL PROPERTIES SECTION 9 DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS GENERAL PRINCIPLES		-	Identical under dual numbering
8.	IS 13360 (Part 10/Sec 4):2001	Plastics - Methods of testing: Part 10 thermosetting properties section 4 determination of gel time and peak exothermic temperature of reacting thermosetting resins	April, 2021	-	Not Equivalent
9.	IS 13360 (Part 10/Sec 5):2004 ISO 119	Plastics - Methods of testing: Part 10 Resin (Thermosetting Properties) Section 5 Phenol - Formaldehyde mouldings - Determination of free phenols - Iodometric method	July, 2025	-	Identical under dual numbering
10.	IS 13360 (Part 10/Sec 6):2004 ISO 120	Plastics - Methods of testing: Part 10 resin (Thermosetting Properties) section 6 phenol - Formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Calorimetric comparison method	July, 2025	-	Identical under dual numbering
11.	IS 13360 (Part 10/Sec 7):2004 ISO 308	Plastics - Methods of testing: Part 10 resin (ThermosettlNg Properties) section 7 phenol - Formaldehyde mouldings - Determination of acetone - Soluble matter (Apparent Resin Content Of Material In The Unmoulded State)	July, 2025	-	Identical under dual numbering
12.	IS 13360 (Part 11/Sec 1):1999 ISO 8295	Plastics - Methods of testing part 11 special properties se&on 1 film and sheeting - Determination of coefficients of friction	July, 2025	-	Identical under dual numbering
13.	IS 13360 (Part 11/Sec 11):1999 ISO 3219	Plastics - Methods of testing: Part 11 special properties section 11 polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate	July, 2025	-	Identical under dual numbering
14.	IS 13360 (Part 11/Sec 13):2006	Plastics - Methods of testing: Part 11 special properties section 13 film and sheeting - Determination of cold - Crack temperature	April, 2021	-	Identical under dual numbering
15.	IS 13360 (Part 11/Sec 4):1999 Reaffirmed but not taken up for revision	Plastics - Methods of testing: Part 11 special properties section 4 determination of gel count of plastics film	July, 2020	-	Not Equivalent
16.	IS 13360 (Part 7/Sec 1):2023 ISO 3915 : 2022	PLASTICS METHODS OF TESTING PART 7 ELECTRICAL PROPERTIES SECTION 1 MEASUREMENT OF RESISTIVITY OF CONDUCTIVE PLASTICS		-	Identical under dual numbering
17.	IS 13360 (Part 11/Sec 5):2001 ISO 2115	Plastics - Methods of testing: Part 11 special properties - Section 5 determination of white point temperature and minimum film - Forming temperature	April, 2021	-	Identical under dual numbering
18.	IS 13360 (Part 11/Sec 7):2018 ISO 6427 : 2013	Plastics - Methods of testing: Part 11 special properties section 7 determination of matter extractable by organic solvents (Conventional Method) (First Revision)	August, 2023	-	Identical under dual numbering
19.	IS 13360 (Part 2/Sec 10):2006	Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 10 injection moulding of test specimens of thermosetting powder moulding compounds (Pmcs) - General principles and moulding of multipurpose test specimens	April, 2021	-	Identical under dual numbering
20.	IS 13360 (Part 2/Sec 11):2006	Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 11 injection moulding offest specimens of thermosetting powder moulding compounds (Pmcs) - Small plates	April, 2021	-	Identical under dual numbering
21.	IS 13360 (Part 3/Sec 13):2025 ISO 16012 : 2015	PLASTICS ï¿½ METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES SECTION 13 DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS		-	Identical under dual numbering
22.	IS 13360 (Part 5/Sec 5/Sub-Sec 2):2025 ISO 179-2 : 2020	Plastics — Methods of Testing Part 5 Mechanical Properties Section 5 Determination of Charpy Impact Properties Sub-section 2 Instrumented Impact Test ( Second Revision )		-	Identical under dual numbering
23.	IS 13360 (Part 3/Sec 2):1997 ISO 60	Plastics - Methods of testing: Part 3 physical and dimensional properties section 2 determination of apparent density of material that can be poured from a specified funnel	May, 2022	-	Identical under dual numbering
24.	IS 13360 (Part 5/Sec 28/Sub-Sec 2):2025 ISO 6603-2 : 2023	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 28 DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS SUBSECTION 2 INSTRUMENTED IMPACT TESTING		-	Identical under dual numbering
25.	IS 13360 (Part 3/Sec 3):1997 ISO 61	Plastics - Methods of testing: Part 3 physical and dimensional properties section 3 determination of apparent density of moulding material that cannot be poured from a specified funnel	May, 2022	-	Identical under dual numbering
26.	IS 13360 (Part 5/Sec 30):2025 ISO 19252 : 2008	PLASTICS ï¿½ METHODS OF TESTING : PART 5 MECHANICAL PROPERTIES, SEC 30 DETERMINATION OF SCRATCH PROPERTIES		-	Identical under dual numbering
27.	IS 13360 (Part 6/Sec 1):2025 ISO 306 : 2022	PLASTICS - METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 1 DETERMINATION OF VICAT SOFTENING TEMPERATURE OF THERMOPLASTIC MATERIALS (Third Revision)		-	Identical under dual numbering
28.	IS 13360 (Part 3/Sec 6):2000 ISO 4591	Plastics - Methods of testing: Part 3 physical and dimensional properties section 6 film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll by gravimetric techniques (Gravimetric Thickness)	April, 2021	-	Identical under dual numbering
29.	IS 13360 (Part 3/Sec 7):1999 ISO 1675	Plastics - Methods of testing: Part 3 physical and dimensional properties section 7 liquid resins - Determination of density by the pyknometer method	July, 2025	-	Identical under dual numbering
30.	IS 13360 (Part 8/Sec 6/Sub-Sec 2):2025 ISO 15105-2 : 2003	PLASTICS - METHODS OF TESTING PART 8 PERMANENCE/CHEMICAL PROPERTIES SECTION 6 FILM AND SHEETING - DETERMINATION OF GAS-TRANSMISSION RATE SUB-SECTION 2 EQUAL-PRESSURE METHOD (First Revision)		-	Identical under dual numbering
31.	IS 13360 (Part 3/Sec 9):1999	Plastics - Methods of testing: Part 3 physical and dimensional properties section 9 determination of moisture in plastics by coulometric regeneration of phosphorus pentoxide	July, 2025	-	Indigenous
32.	IS 13360 (Part 8/Sec 15):2025 ISO 22088-1 : 2006	PLASTICS METHODS OF TESTING PART 8 PERMANENCE/CHEMICAL PROPERTIES SECTION 15 DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC GENERAL GUIDANCE		-	Identical under dual numbering
33.	IS 13360 (Part 2/Sec 2):2013 ISO 295 : 2004	Plastics - Methods of testing: Part 2 sampling and preparation of test specimens Section 2 compression moulding of test specimens of thermosetting materials (First Revision)	February, 2023	-	Identical under dual numbering
34.	IS 13360 (Part 4/Sec 1):2000 ISO 1133	Plastics - Methods of testing: Part 4 rheological properties section 1 determination of the melt mass - Flow rate (Mfj3)And the melt volume - Flow rate (Mvr) of thermoplastics (First Revision)	February, 2018	-	Identical under dual numbering
35.	IS 13360 (Part 8/Sec 16):2025 ISO 22088-6 : 2006	PLASTICS METHODS OF TESTING PART 8 PERFORMANCECHEMICAL PROPERTIES SECTION 16 DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC SLOW STRAIN RATE METHOD		-	Identical under dual numbering
36.	IS 13360 (Part 2/Sec 5):2018 ISO 3167 : 2014	Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 5 multipurpose test specimens (Second Revision)	March, 2023	-	Identical under dual numbering
37.	IS 13360 (Part 4/Sec 2):1999	Plastics - Methods of testing : Part 4 Rheological properties Section 2 cup flow of phenolic and alkyd moulding materials	July, 2025	-	Indigenous
38.	IS 13360 (Part 8/Sec 17):2025 ISO 22088-4 : 2006	PLASTICS METHODS OF TESTING PART 8 PERMANENCE / CHEMICAL PROPERTIES SECTION 17 DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC BALL OR PIN IMPRESSION METHOD		-	Identical under dual numbering
39.	IS 13360 (Part 3/Sec 5):2013 ISO 2577 : 2007	Plastics - Methods of testing: Part 3 physical and dimensional properties section 5 thermosetting moulding materials - Determination of shrinkage (First Revision)	February, 2023	-	Identical under dual numbering
40.	IS 13360 (Part 4/Sec 4):1999	Plastics - Methods of testing: Part 4 rheological properties section 4 determination of properties of polymeric materials by means of a capillary rheometer	July, 2025	-	Indigenous
41.	IS 13360 (Part 8/Sec 18):2025 ISO 22088-5 : 2006	PLASTICS METHODS OF TESTING PART 8 PERMANENCE / CHEMICAL PROPERTIES SECTION 18 DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC CONSTANT TENSILE DEFORMATION METHOD		-	Identical under dual numbering
42.	IS 13360 (Part 5/Sec 10):2018 ISO 6383-1 : 2015	Plastics - Methods of testing: Part 5 mechanical properties section 10 determination of tear resistance of plastics films and sheeting - Trouser tear method (First Revision)	September, 2023	-	Identical under dual numbering
43.	IS 13360 (Part 5/Sec 12):2017 ISO 2039-1 : 2001	Plastics - Methods of testing: Part 5 mechanical properties section 12 determination of hardness - Ball indentation method (First Revision)	May, 2022	-	Indigenous
44.	IS 13360 (Part 5/Sec 13):1992	Plastics - Methods of testing: Part 5 mechanical properties section 13 determination of rockwell hardness	February, 2023	-	Indigenous
45.	IS 13360 (Part 5/Sec 14):2001	Plastics - Methods of testing: Part 5 mechanical properties section 14 determination of indentation hardness of rigid plastic by means of barcol impressor	December, 2021	-	Indigenous
46.	IS 13360 (Part 5/Sec 19):1999	Plastics - Methods of testing: Part 5 mechanical properties section 19 determination of resistance of plastic materials to abrasion	July, 2025	-	Indigenous
47.	IS 13360 (Part 5/Sec 2):2017 ISO 527-2 : 2012	Plastics - Methods of testing: Part 5 mechanical properties section 2 determination of tensile properties - Test conditions for moulding and extrusion plastics (First Revision)	May, 2022	-	Identical under dual numbering
48.	IS 13360 (Part 5/Sec 26):2023 ISO 527-5 : 2021	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 26 DETERMINATION OF TENSILE PROPERTIES TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES		-	Identical under dual numbering
49.	IS 13360 (Part 5/Sec 22):2017 ISO 9395 : 2012	Plastics - Methods of testing: Part 5 mechanical properties section 22 determination of resistance to wear by abrasive wheels (First Revision)	May, 2022	-	Indigenous
50.	IS 13360 (Part 5/Sec 23):1996	Plastics - Methods of testing: Part 5 mechanical properties section 23 determination of tear resistance of plastics film and sheeting - Elmendorf method	February, 2023	-	Identical under dual numbering
51.	IS 13360 (Part 5/Sec 24):1999 ISO 7765-2	Plastics - Methods of testing: Part 5 mechanical properties section 24 determination of impact resistance by the free - Failing dart method - Instrumented punctureTest	July, 2025	-	Identical under dual numbering
52.	IS 13360 (Part 5/Sec 25):2004 ISO 527-4	Plastics - Methods of testing: Part 5 mechanical properties section 25 determination of tensile properties - Test conditions for isotropic and orthotropic fibre - Reinforced plastic composites	July, 2025	-	Identical under dual numbering
53.	IS 13360 (Part 5/Sec 5/Sub-Sec 2):2017 ISO 179-1 : 2010	Plastics - Methods of testing: Part 5 mechanical properties section 5 determination of charpy impact properties - Non - Instrumented impact test (First Revision)	May, 2022	-	Identical under dual numbering
54.	IS 13360 (Part 5/Sec 6):1999 ISO 7765-1	Plastics - Methods of testing: Part 5 mechanical properties section 8 determination of impact resistance by the free - Falling dart method - Staircase methods	July, 2025	-	Identical under dual numbering
55.	IS 13360 (Part 6/Sec 11):2004 ISO 974	Plastics - Methods of testing: Part 6 thermal properties section 11 determination of the brittleness temperature by impact	July, 2025	-	Identical under dual numbering
56.	IS 13360 (Part 6/Sec 14):2004	Plastics - Methods of testing: Part 6 thermal properties section 14 standard test method for coefficient of linear thermal expansion of plastics between - 30°C and 30°C with a vitreous silica dilatometer	July, 2025	-	Indigenous
57.	IS 13360 (Part 6/Sec 19):2019 ISO 4589 -2 : 2017	Plastics ? Methods of Testing Part 6 Thermal Properties Section 19 Flammability by oxygen index ? Ambient temperature test ( First Revision )	March, 2024	-	Identical under dual numbering
58.	IS 13360 (Part 6/Sec 20):2019 ISO 4589-3 : 2017	Plastics ? Methods of Testing Part 6 Thermal Properties Section 20 Flammability by oxygen index ? Elevated temperature test ( First Revision )	March, 2024	-	Identical under dual numbering
59.	IS 13360 (Part 6/Sec 22):2006 ISO 2785	Plastics - Methods of testing: Part 6 thermal properties section 22 determination of time - Temperature limits after prolonged exposure to heat	April, 2021	-	Identical under dual numbering
60.	IS 13360 (Part 6/Sec 23):2006	Plastics - Methods of testing: Part 6 thermal properties section 23 determination of burning behaviour of thin fiexibie verticai specimens in contact with smaii - Fiame ignition source	December, 2022	1	Identical under dual numbering
61.	IS 13360 (Part 6/Sec 6):2019 ISO 4589-1 : 2017	Plastics ? Methods of Testing Part 6 Thermal Properties Section 6 Flammability by oxygen index ? General requirements ( Second Revision )	March, 2024	-	Identical under dual numbering
62.	IS 13360 (Part 3/Sec 11):2021 ISO 1183-2: 2019	Plastics Methods of Testing: Part 3 Physical and Dimensional Properties Section 11 Determination of Density of Non-cellular Plastics Density Gradient Column Method First Revision	July, 2025	-	Identical under dual numbering
63.	IS 13360 (Part 8/Sec 14):2018 ISO 4611 : 2010	Plastics - Methods of testing: Part 8 performance/chemical properties section 14 determination of the effects of exposure to damp heat, water spray and salt mist (First Revision)	June, 2023	-	Identical under dual numbering
64.	IS 13360 (Part 11/Sec 14):2006	Plastics - Methods of: Part 11 special properties testing section 14 film and sheeting - Determination of dimensional change on heating	April, 2021	-	Identical under dual numbering
65.	IS 13360 (Part 8/Sec 11):2018 ISO 22088-2 : 2006	Plastics - Methods of testing: Part 8 performance/chemical properties section 11 determination of environmental stress cracking (Esc) - Constant - Tensile load method (First Revision)	June, 2023	-	Identical under dual numbering
66.	IS/ISO 13360-4-5):2016 ISO 11443 : 1995	Plastics - Methods of Testing part 4 Rheological Properties Section 5 Determination of the Fluidity of Plastics Using Capillary and Slit-Die Rheometers		-	Identical under dual numbering
67.	IS 13360 (Part 8/Sec 3):2018 ISO 175 : 2010	Plastics - Methods of testing: Part 8 permanence / chemical properties section 3 determination of the effects of the immersion in liquid chemicals (First Revision)	September, 2023	-	Identical under dual numbering
68.	IS 13360 (Part 8/Sec 4):2018 ISO 176 : 2005	Plastics - Methods of testing: Part 8 permanece/chemical properties section 4 determination of loss of plasticizers - Activated carbon method (First Revision)	May, 2023	-	Indigenous
69.	IS 13360 (Part 8/Sec 5):2019 ISO 177 : 2016	Plastics — Methods of testing Part 8 Permanence / Chemical Properties Section 5 Determination of migration of plasticizers ( First Revision )	March, 2024	-	Identical under dual numbering
70.	IS 13360 (Part 8/Sec 13):2021 ISO 4582 : 2007	Plastics Methods Of Testing Part 8 Permanence chemical Properties Section 13 Determination of Changes in Colour and Variations in Properties After Exposure to Daylight Under Glass Natural Weathering or Laboratory Light Sources First Revision of IS 1	July, 2025	-	Identical under dual numbering
71.	IS 13360 (Part 9/Sec 1):2004 ISO 489	Plastics - Methods of testing: Part 9 optical properties section 1 determination of refractive index	July, 2025	-	Identical under dual numbering
72.	IS 13360 (Part 6/Sec 18):2013 ISO 75-3: 2004	Plastics - Methods of testing: Part 6 thermal properties section 18 determination of temperature of deflection under load - High - Strength thermosetting laminates and long - Fibre - Reinforced plastics (First Revision)	February, 2023	-	Identical under dual numbering
73.	IS 13360 (Part 9/Sec 5):1999	Plastics - Methods of testing: Part 9 optical properties section 5 determination of haze and luminous transmittance of transparent plastics	July, 2025	-	Indigenous
74.	IS 13360 (Part 4/Sec 3):2004	Plastics - Methods of testing: Part 4 rhelogical properties section 3 determination of spiral flow of low - Pressure thermosetting moulding compounds	July, 2020	-	Indigenous
75.	IS 13360 (Part 3/Sec 10):2021 ISO 1183-1: 2019	Plastics Methods of Testing Part: 3 Physical and Dimensional Properties Section 10 Determination of Density of Non-cellular Plastics Immersion Method Liquid Pyknometer Method and Titration Method First Revision	July, 2025	-	Identical under dual numbering
76.	IS 13360 (Part 9/Sec 10):2018	Plastics - Methods of testing: Part 9 optical properties section 10 qualitative evaluation of the bleeding of colorants	October, 2023	-	Indigenous
77.	IS 13360 (Part 5/Sec 7):2022 ISO 178 : 2019	PLASTICS METHOD OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 7 DETERMINATION OF FLEXURAL PROPERTIES		-	Identical under dual numbering
78.	IS 13360 (Part 4/Sec 5):2022 ISO 11443 : 2021	Plastics - Methods of Testing: Part 4 Rheological Properties Section 5 Determination of the Fluidity of Plastics Using Capillary and Slit - Die Rheometers First Revision		-	Identical under dual numbering
79.	IS 13360 (Part 4/Sec 1/Sub-Sec 2):2018 ISO 1133-2:2011	Plastics - Methods of Testing - Part 4 : Rheological Properties - Section 1 : Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics	March, 2023	-
80.	IS 13360 (Part 9/Sec 7):2023	PLASTICS METHODS OF TESTING PART 9 OPTICAL PROPERTIES Section 7 Determination of Specular Gloss of Plastic Films and Solid Plastics		-	Indigenous
81.	IS 13360 (Part 1):2025	Plastics - Methods of Testing Part 1 Introduction (First Revision)		-	Indigenous
82.	IS 13360 (Part 2/Sec 1):2025 ISO 293 : 2023	PLASTICS - METHODS OF TESTING PART 2 SAMPLING AND PREPARATION OF TEST SPECIMENS SECTION 1 PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS (Second Revision)		-	Identical under dual numbering
83.	IS 13360 (Part 3/Sec 4):2025 ISO 171 : 2022	PLASTICS - METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES SECTION 4 DETERMINATION OF BULK FACTOR OF MOULDING MATERIALS (First Revision)		-	Identical under dual numbering
84.	IS 13360 (Part 6/Sec 9):2025	Plastics - Methods of Testing Part 6 Thermal Properties Section 9 Determination of Density of Smoke from the Burning or Decomposition of Plastics (First Revision)		-	Indigenous
85.	IS 13360 (Part 5/Sec 28/Sub-Sec 1):2025 ISO 6603-1 : 2000	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 28 DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS SUBSECTION 1 NON-INSTRUMENTED IMPACT TESTING		-	Identical under dual numbering
86.	IS 13360 (Part 9/Sec 9):2025 ISO 17223 : 2014	PLASTICS ï¿½ METHODS OF TESTING PART 9 OPTICAL PROPERTIES SECTION 9 DETERMINATION OF YELLOW INDEX AND CHANGE IN YELLOWNESS INDEX (First Revision)		-	Identical under dual numbering
87.	IS 13360 (Part 6/Sec 24):2024 ISO 9772 : 2020	Plastics â€” Methods of Testing Part 6 Thermal Properties Section 24 Cellular Plastics â€” Determination of Horizontal Burning Characteristics of Small Specimens Subjected to a Small Flame (First Revision)		-	Identical under dual numbering
88.	IS 13360 (Part 9/Sec 8):2023	PLASTICS METHODS OF TESTING PART 9 OPTICAL PROPERTIES Section 8 Determination of Transparency of Plastic Sheeting		-	Indigenous
89.	IS 13360 (Part 2/Sec 4):2021 ISO 2818: 2018	Plastics - Methods of testing: Part 2 Sampling and preparation of test specimens Section 4 Preparation of test specimens by machining Second Revision	July, 2025	-	Identical under dual numbering
90.	IS 13360 (Part 5/Sec 5/Sub-Sec 1):2025	PLASTICS — METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 5 DETERMINATION OF CHARPY IMPACT PROPERTIES SUBSEC 1 NON-INSTRUMENTED IMPACT TEST (Second Revision)		-	Identical under dual numbering
91.	IS 13360 (Part 3/Sec 2):2025	PLASTICS — METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES Section 2 Determination of Apparent Density of Material that Can be Poured from a Specified Funnel (First Revision)		-	Identical under dual numbering
92.	IS 13360 (Part 3/Sec 9):2026	PLASTICS METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES Section 9 Determination of Moisture First Revision		-	Indigenous
93.	IS 13360 (Part 5/Sec 14):2026	PLASTICS — METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 14 DETERMINATION OF INDENTATION HARDNESS OF RIGID PLASTIC BY BARCOL IMPRESSOR (First Revision)		-	Indigenous
94.	IS 13360 (Part 5/Sec 3):2022 ISO 527-3 : 2018	PLASTICS METHOD OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 3 DETERMINATION OF TENSILE PROPERTIES TEST CONDITIONS FOR FILMS AND SHEETS		-	Identical under dual numbering
95.	IS 13360 (Part 11/Sec 15):2022 ISO 12058-1 : 2018	PLASTICS - METHODS OF TESTING PART 11 SPECIAL PROPERTIES Section 15 Determination of Viscosity using a Falling-Ball Viscometer Inclined-tube method		-	Identical under dual numbering
96.	IS 13360 (Part 6/Sec 17):2017 ISO 75-2 :2013	Plastics - Methods of testing: Part 6 thermal properties section 17 determination of temperature of deflection under load - Plastics and ebonite (Second Revision)	May, 2022	-	Identical under dual numbering
97.	IS 13360 (Part 3/Sec 3):2026	PLASTICS — METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES Section 3 Determination of Apparent Density of moulding Material that cannot be Poured from a Specified Funnel (First Revision)		-	Identical under dual numbering
98.	IS 13360 (Part 3/Sec 7):2026	PLASTICS — METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES Section 7 Liquid Resins — Determination of Density by the Pyknometer Method (First Revision)		-	Identical under dual numbering
99.	IS 13360 (Part 4/Sec 2):2026	Plastics - Methods of testing Part 4 Rheological Properties Section 2 Cup Flow of Phenolic and Alkyd Moulding Materials (First Revision)		-	Indigenous
100.	IS 13360 (Part 11/Sec 11/Sub-Sec 1):2026	PLASTICS — METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 11 RHEOLOGY SUBSECTION 1 VOCABULARY AND SYMBOLS FOR ROTATIONAL AND OSCILLATORY RHEOMETRY (First Revision)		-	Identical under dual numbering
101.	IS 13360 (Part 11/Sec 11/Sub-Sec 2):2026	PLASTICS — METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 11 RHEOLOGY SUBSECTION 2 GENERAL PRINCIPLES OF ROTATIONAL AND OSCILLATORY RHEOMETRY (First Revision)		-	Identical under dual numbering
102.	IS 13360 (Part 11/Sec 3):2022 ISO 11502 : 2018	PLASTICS METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 3 FILM AND SHEETING DETERMINATION OF BLOCKING RESISTANCE		-	Identical under dual numbering
103.	IS 13360 (Part 5/Sec 31/Sub-Sec 1):2026	PLASTICS PLASTICS — METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 1 GENERAL PRINCIPLES METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 1 GENERAL PRINCIPLES		-
104.	IS 13360 (Part 5/Sec 31/Sub-Sec 2):2026	PLASTICS — METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 2 TORSION-PENDULUM METHOD		-
105.	IS 13360 (Part 5/Sec 31/Sub-Sec 3):2026	PLASTICS — METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 3 FLEXURAL VIBRATION — RESONANCE-CURVE METHOD		-
106.	IS 13360 (Part 5/Sec 31/Sub-Sec 4):2026	PLASTICS — METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 4 TENSILE VIBRATION — NON-RESONANCE METHOD		-
107.	IS 13360 (Part 31/Sec 5/Sub-Sec 5):2026	PLASTICS — METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 5 FLEXURAL VIBRATION — NON-RESONANCE METHOD		-
108.	IS 13360 (Part 5/Sec 31/Sub-Sec 6):2026	PLASTICS — METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL ROPERTIES SUBSEC 6 SHEAR VIBRATION — NON-RESONANCE METHOD		-
109.	IS 13360 (Part 5/Sec 31/Sub-Sec 7):2026	PLASTICS — METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 7 TORSIONAL VIBRATION — NON-RESONANCE METHOD		-
110.	IS 13360 (Part 5/Sec 31/Sub-Sec 8):2026	PLASTICS — METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 8 LONGITUDINAL AND SHEAR VIBRATION — WAVE-PROPAGATION METHOD		-
111.	IS 13360 (Part 5/Sec 31/Sub-Sec 9):2026	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 9 TENSILE VIBRATION — SONIC-PULSE PROPAGATION METHOD		-
112.	IS 13360 (Part 5/Sec 31/Sub-Sec 10):2026	PLASTICS — METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 10 COMPLEX SHEAR VISCOSITY USING A PARALLEL-PLATE OSCILLATORY RHEOMETER		-
113.	IS 13360 (Part 5/Sec 31/Sub-Sec 11):2026	PLASTICS — METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 11 GLASS TRANSITION TEMPERATURE		-
114.	IS 13360 (Part 5/Sec 31/Sub-Sec 12):2026	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 12 COMPRESSIVE VIBRATION NON-RESONANCE METHOD		-
115.	13360:2025 ISO 1133-1 : 2022	Plastics ï¿½ Methods of Testing Part 4 Rheological Properties Section 1 Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics Sub-section 1 Standard Method (Third Revision)		-	Identical under dual numbering
116.	IS 13360 (Part 5/Sec 29):2025 ISO 18872 : 2007	PLASTICS ï¿½ METHODS OF TESTING : PART 5 MECHANICAL PROPERTIES, SECTION 29 DETERMINATION OF TENSILE PROPERTIES AT HIGH STRAIN RATES		-	Identical under dual numbering
117.	IS 13360 (Part 6/Sec 3):2022 ISO 75-1 : 2020	PLASTICS METHOD OF TESTING PART 6 THERMAL PROPERTIES SECTION 3 DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD GENERAL TEST METHOD		-	Identical under dual numbering
118.	IS 13360 (Part 11/Sec 10):2022 ISO 2555 : 2018	PLASTICS - METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 10 RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS DETERMINATION OF APPARENT VISCOSITY USING A SINGULAR CYLINDER TYPE ROTATIONAL VISCOMETER METHOD		-	Identical under dual numbering
119.	IS 13360 (Part 5/Sec 4):2021	Plastics - Methods of Testing Part 5 : Mechanical Properties Sec 4 Determination of Izod Impact Strength	July, 2025	-	Identical under dual numbering
120.	IS 13360 (Part 8/Sec 8):2021 ISO 3451-1:2008	Plastics Methods of testing Part 8 Permanencechemical properties Section 8 Determination of Ash General Methods First Revision	July, 2025	-	Identical under dual numbering
121.	IS 13360 (Part 8/Sec 1):2022 ISO 62 : 2008	Plastics Methods of Testing Part 8 PermanenceChemical Properties Section 1 Determination of Water Absorption First Revision		-	Identical under dual numbering
122.	IS 13360 (Part 6/Sec 10):2023 ISO 3146 : 2022	PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 10 DETERMINATION OF MELTING BEHAVIOUR MELTING TEMPERATURE OR MELTING RANGE OF SEMI-CRYSTALLINE POLYMERS BY CAPILLARY TUBE AND POLARIZING - MICROSCOPE METHODS		-	Identical under dual numbering
123.	IS 13360 (Part 6/Sec 21):2023 ISO 871 : 2022	PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 21 DETERMINATION OF IGNITION TEMPERATURE USING A HOT-AIR FURNACE		-	Identical under dual numbering
124.	IS 13360 (Part 2/Sec 7):2021 ISO 294-3	Plastics - Methods of testing: Part 2 Sampling and preparation of test specimens Section 7 Injection moulding of test specimens of thermoplastic materials - Small plates (Third Revision)	July, 2025	-	Identical under dual numbering
125.	IS 13360 (Part 2/Sec 9):2021 ISO 294-2: 2018	PLASTICS - Methods of Testing: Part 2 Sampling and Preparation of Test Specimens Section 9 Injection Moulding of Test Specimens of Thermoplastic Materials - Small Tensile Bars First Revision	July, 2025	-	Identical under dual numbering
126.	IS 13360 (Part 5/Sec 27):2022 ISO 8256: 2004	Plastics — Methods of Testing Part 5 Mechanical Properties Section 27 Determination of tensile-impact strength		-	Identical under dual numbering
127.	IS 13360 (Part 5/Sec 1):2021 ISO 527-1: 2019	Plastics - Methods of testing: Part 5 Mechanical properties Section 1 Determination of tensile properties - General requirements Second Revision	July, 2025	-	Identical under dual numbering
128.	IS 13360 (Part 2/Sec 3):2019 ISO 294-1 : 2017	Plastics ? Methods of Testing Part 2 Sampling and Preparation of Test Specimens Section 3 Injection moulding of test specimens of thermoplastic materials - General principles and moulding of multipurpose and bar test specimens ( First Revision )	June, 2024	-	Identical under dual numbering
129.	IS/ISO 14851:2022 ISO 14851 : 2019	Determination of the Ultimate Aerobic Biodegradability of Plastic Materials in an Aqueous Medium Method by Measuring the Oxygen Demand in A Closed respirometer First Revision		-	Identical under single numbering
130.	IS/ISO 14852:2021 ISO 14852 : 2021	Determination of the Ultimate Aerobic Biodegradability of Plastic Materials in an Aqueous Medium Method by Analysis of Evolved Carbon Dioxide First Revision	July, 2025	-	Identical under single numbering
131.	IS/ISO 14853:2016	Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production	March, 2022	-	Identical under single numbering
132.	IS/ISO 14855-2:2018 ISO 14855-2:2018	DETERMINATION OF THE ULTIMATE AEROBIC BIODEGRADABILITY OF PLASTIC MATERIALS UNDER CONTROLLED COMPOSTING CONDITIONS METHOD BY ANALYSIS OF EVOLVED CARBON DIOXIDE PART 2 GRAVIMETRIC MEASUREMENT OF CARBON DIOXIDE EVOLVED IN A LABORATORY-SCALE TEST Fi		-	Identical under single numbering
133.	IS/ISO 14855-1:2000 ISO 14855-1 : 2012	Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide: Part 1 general method (First Revision)	December, 2016	-	Identical under single numbering
134.	IS/ISO 15985:2014 ISO 15985 : 2014	Plastics - Determination of the ultimate anaerobic biodegradation under high - Solids anaerobic - Digestion conditions - Method by analysis of released biogas (First Revision)	May, 2023	-	Identical under dual numbering
135.	IS/ISO 16929:2019 ISO 16929 : 2013	Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test First Revision	March, 2024	-	Identical under single numbering
136.	IS/ISO 17556:2019 ISO 17556:2012	Plastics Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved First Revision		-	Identical under single numbering
137.	IS 17863 (Part 4):2022 ISO 4892-4:2013	Plastics Methods of Exposure to Laboratory Light Sources: Part 4 Open-Flame Carbon-Arc Lamps		-	Identical under dual numbering
138.	IS 17863 (Part 1):2022 ISO 4892-1: 2016	Plastics Methods of Exposure to Laboratory Light Sources: Part 1 General Guidance		-	Identical under dual numbering
139.	IS 17863 (Part 2):2022 ISO 4892-2:2013	Plastics Methods of Exposure to Laboratory Light Sources: Part 2 Xenon-Arc Lamps		-	Identical under dual numbering
140.	IS 17863 (Part 3):2022 ISO 4892-3:2016	Plastics Methods of Exposure to Laboratory Light Sources: Part 3 Fluorescent UV Lamps		-	Identical under dual numbering
141.	IS 17864:2022 ISO 9370: 2017	Plastics Instrumental Determination of Radiant Exposure in Weathering Tests General Guidance and Basic Test Method		-	Identical under dual numbering
142.	IS 17948 (Part 3):2022 ISO 16620-3 : 2015	PLASTICS BIOBASED CONTENT : PART 3 DETERMINATION OF BIOBASED SYNTHETIC POLYMER CONTENT		-	Identical under dual numbering
143.	IS 17948 (Part 5):2022 ISO 16620-5 : 2017	PLASTICS BIOBASED CONTENT : PART 5 DECLARATION OF BIOBASED CARBON CONTENT BIOBASED SYNTHETIC POLYMER CONTENT AND BIOBASED MASS CONTENT		-	Identical under dual numbering
144.	IS 17948 (Part 2):2023 ISO 16620-2 : 2019	PLASTICS BIOBASED CONTENT : PART 2 DETERMINATION OF BIOBASED CARBON CONTENT		-	Identical under dual numbering
145.	IS 17948 (Part 1):2022 ISO 16620-1 : 2015	PLASTICS BIOBASED CONTENT : PART 1 GENERAL PRINCIPLES		-	Identical under dual numbering
146.	IS 17948 (Part 4):2022 ISO 16620-4 : 2016	PLASTICS BIOBASED CONTENT : PART 4 DETERMINATION OF BIOBASED MASS CONTENT		-	Identical under dual numbering
147.	IS 17949 (Part 1):2022 ISO 22526-1 : 2020	PLASTICS CARBON AND ENVIRONMENTAL FOOTPRINT OF BIOBASED PLASTICS : PART 1 GENERAL PRINCIPLES		-	Identical under dual numbering
148.	IS 17949 (Part 2):2022 ISO 22526-2 : 2020	PLASTICS CARBON AND ENVIRONMENTAL FOOTPRINT OF BIOBASED PLASTICS : PART 2 MATERIAL CARBON FOOTPRINT AMOUNT MASS OF CO2 REMOVED FROM THE AIR AND INCORPORATED INTO POLYMER MOLECULE		-	Identical under dual numbering
149.	IS 17950 (Part 1):2022 ISO 16014-1 : 2019	PLASTICS DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY PART 1 GENERAL PRINCIPLES		-	Identical under dual numbering
150.	IS 17950 (Part 2):2022 ISO 16014-2 : 2019	PLASTICS DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY PART 2 UNIVERSAL CALIBRATION METHOD		-	Identical under dual numbering
151.	IS 17950 (Part 3):2022 ISO 16014-3 : 2019	PLASTICS DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY PART 3 LOW-TEMPERATURE METHOD		-	Identical under dual numbering
152.	IS 17950 (Part 4):2022 ISO 16014-4 : 2019	PLASTICS DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY PART 4 HIGH-TEMPERATURE METHOD		-	Identical under dual numbering
153.	IS 17972:2022 ISO 18830 : 2016	Plastics Determination of Aerobic Biodegradation of Non-Floating Plastic Materials in a SeawaterSandy Sediment Interface - Method by Measuring the Oxygen Demand In Closed Respirometer		-	Identical under dual numbering
154.	IS 17973:2022 ISO 19679 : 2016	Plastics Determination of Aerobic Biodegradation of Non-Floating Plastic Materials in A SeawaterSediment Interface Method by Analysis of Evolved Carbon Dioxide		-	Identical under dual numbering
155.	IS 17974:2022 ISO 22403 : 2020	Plastics â€” Assessment of the intrinsic biodegradability of materials exposed to marine inocula under mesophilic aerobic laboratory conditions â€” Test methods and requirements		-	Identical under dual numbering
156.	IS 17998:2022 ISO 22404 : 2019	Plastics Determination of the Aerobic Biodegradation of Non-Floating Materials Exposed To Marine Sediment Method by Analysis of Evolved Carbon Dioxide		-	Identical under dual numbering
157.	IS 17999:2022 ISO/TR 21960 : 2020	Plastics Environmental Aspects State of Knowledge and Methodologies		-	Identical under dual numbering
158.	IS 18059:2022 ISO 10210 : 2012	PLASTICS METHODS FOR THE PREPARATION OF SAMPLES FOR BIODEGRADATION TESTING OF PLASTIC MATERIALS		-	Identical under dual numbering
159.	IS 18060:2022 ISO 13975 : 2019	PLASTICS DETERMINATION OF THE ULTIMATE ANAEROBIC BIODEGRADATION OF PLASTIC MATERIALS IN CONTROLLED SLURRY DIGESTION SYSTEMS METHOD BY MEASUREMENT OF BIOGAS PRODUCTION		-	Identical under dual numbering
160.	IS 18065:2022 ISO 17422 : 2018	PLASTICS ENVIRONMENTAL ASPECTS GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS		-	Identical under dual numbering
161.	IS 18998:2025 ISO 24187 : 2023	PRINCIPLES FOR THE ANALYSIS OF MICROPLASTICS PRESENT IN THE ENVIRONMENT		-	Identical under dual numbering
162.	IS 19015:2022 ISO 22766 : 2020	Plastics Determination of the Degree of Disintegration of Plastic Materials in Marine Habitats under Real Field Conditions		-	Identical under dual numbering
163.	IS 19048:2025 ISO 13802 : 2015	PLASTICS ï¿½ VERIFICATION OF PENDULUM IMPACT-TESTING MACHINES ï¿½ CHARPY, IZOD AND TENSILE IMPACT-TESTING		-	Identical under dual numbering
164.	IS 19050:2025 ISO 17541 : 2014	PLASTICS ï¿½ QUANTITATIVE EVALUATION OF SCRATCH -INDUCED DAMAGE AND SCRATCH VISIBILITY		-	Identical under dual numbering
165.	IS 19161:2025 ISO 16869 : 2008	PLASTICS ï¿½ ASSESSMENT OF THE EFFECTIVENESS OF FUNGISTATIC COMPOUNDS IN PLASTICS FORMULATIONS		-	Identical under dual numbering
166.	IS 19162:2025 ISO 15314 : 2018	PLASTICS METHODS FOR MARINE EXPOSURE		-	Identical under dual numbering
167.	IS 19165:2025 ISO 22196 : 2011	MEASUREMENT OF ANTIBACTERIAL ACTIVITY ON PLASTICS AND OTHER NON-POROUS SURFACES		-	Identical under dual numbering
168.	IS 19166:2025 ISO 10640 : 2011	PLASTICS METHODOLOGY FOR ASSESSING POLYMER PHOTOAGEING BY FTIR AND UVVISIBLE SPECTROSCOPY		-	Identical under dual numbering
169.	IS 19167:2025 ISO 21702 : 2019	MEASUREMENT OF ANTIVIRAL ACTIVITY ON PLASTICS AND OTHER NON-POROUS SURFACES		-	Identical under dual numbering
170.	IS 19168:2025 ISO 29664 : 2010	PLASTICS ï¿½ ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION		-	Identical under dual numbering
171.	IS 19169:2025 ISO 21475 : 2019	PLASTICS METHODS OF EXPOSURE TO DETERMINE THE WAVELENGTH DEPENDENT DEGRADATION USING SPECTRALLY DISPERSED RADIATION		-	Identical under dual numbering
172.	IS 19170:2025 ISO 483 : 2005	PLASTICS SMALL ENCLOSURES FOR CONDITIONING AND TESTING USING AQUEOUS SOLUTIONS TO MAINTAIN THE HUMIDITY AT A CONSTANT VALUE		-	Identical under dual numbering
173.	IS 19694:2026	PLASTICS EVALUATION OF THE ACTION OF MICROORGANISMS		-
174.	IS 1998:1962	Methods of test for thermosetting synthetic resin bonded laminated sheets	February, 2023	-	Indigenous
175.	IS/ISO 20200:2015 ISO 20200 : 2015	Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory - Scale test (First Revision)	May, 2023	-	Identical under single numbering
176.	IS 2221:1962	Methods of test for aminoplastic moulding materials	July, 2025	-	Indigenous
177.	IS 2221:2026	AMINOPLASTIC MOULDING MATERIALS - METHODS OF TEST (First Revision)		-	Indigenous
178.	IS 2530:1963	Methods of test for polyethylene moulding materials and polyethylene compounds	February, 2023	-	Indigenous
179.	IS 2530:2026	POLYETHYLENE MOULDING MATERIALS AND POLYETHYLENE COMPOUNDS - METHODS OF TEST (First Revision)		-	Indigenous
180.	IS 4669:1968	Methods of test for polyvinyl chloride resins	February, 2023	-	Indigenous
181.	IS 4669:2026	METHODS OF TEST — POLYVINYL CHLORIDE RESINS (First Revision)		-	Indigenous
182.	IS 7188:1974	Methods of test for cellulose acetate flakes	July, 2025	-	Indigenous
183.	IS 7437:1974	Methods of sampling and test for vegetable adhesives	July, 2025	-	Indigenous
184.	IS 8402:1987	Methods of sampling and test for pressure sensitive adhesive tapes (First Revision)	July, 2025	-	Indigenous
185.	IS 8543 (Part 13/Sec 1):1977 Reaffirmed but not taken up for revision	Methods of testing plastics: Part 13 tests for specific products section 1 buttons (Thermosetting)	July, 2020	-	Indigenous
186.	IS 8543 (Part 1/Sec 1):1978	Methods of testing plastics: Part 1 characterization of polymer structure and size section 1 determination of molecular mass from viscosity	July, 2025	-	Indigenous
187.	IS 8543 (Part 1/Sec 1):2026	PLASTICS METHODS OF TESTING PART 1 CHARACTERIZATION OF POLYMER STRUCTURE AND SIZE SECTION 1 DETERMINATION OF MOLECULAR MASS FROM VISCOSITY first revision		-	Indigenous
188.	IS 867:2026	PHENOLIC MOULDING MATERIALS - METHODS OF TEST (Second Revision)		-	Indigenous
189.	IS 867:1963	Methods of test for phenolic moulding materials (Revised)	February, 2023	-	Indigenous
190.	IS 9591:2023	PLASTICIZER ESTERS METHODS OF SAMPLING AND TESTS		-	Indigenous
191.	IS 9845:1998	Determination of overall migration of constituents of plastics materials and articles intended to come in contact with foodstuffs - Method of analysis (Second Revision)	July, 2025	-	Indigenous

Standards Under Develpoment

Projects Approved

SI. No.	Doc No	TITLE
No Records Found

Preliminary Draft Standards

SI. No.	Doc No	TITLE
No Records Found

Drafts Standards in WC Stage

SI. No.	Doc No	TITLE
No Records Found

Draft Standards Completed WC Stage

SI. No.	Doc No	TITLE
No Records Found

Finalized Draft Indian Standard

SI. No.	Doc No	TITLE
No Records Found

Finalized Draft Indian Standards under Print

SI. No.	Doc No	TITLE
1	PCD 27 (02479) Revision of: IS 13360:2017	Plastics - Methods of Testing - Part 5 Mechanical Properties - Section 7 Determination of Flexural Properties
2	PCD 27 (02490) Revision of: IS 13360:2018	Plastics - Methods of Testing - Part 2 Sampling and Preparation of Test Specimens - Section 5 Multipurpose Test Specimens
3	PCD 27 (02488) Revision of: IS 13360:2013	Plastics - Methods of Testing Part 5 Mechanical Properties Sec 4 Determination of Izod Impact Strength
4	PCD 27 (02790) Revision of: IS 13360:2018	Plastics - Methods of Testing - Part 5 Mechanical Properties - Section 26 Determination of Tensile Properties - Test Conditions for Unidirectional Fibre-Reinforced Plastic Composit
5	PCD 27 (02789) Revision of: IS 13360:2017	Plastics - Methods of Testing Part 5 Mechanical Properties Sec 5 Determination of Charpy Impact Strength
6	PCD 27 (02788) Revision of: IS 13360:2017	Plastics - Methods of Testing Part 5 Mechanical Properties Sec 2 Determination of Tensile Properties - Test Conditions for Moulding and Extrusion Plastics
7	PCD 27 (02791) Revision of: IS 13360:2017	Plastics - Methods of Testing - Part 5 Mechanical Properties - Section 22 Determination of Resistance to Wear by Abrasive Wheels
8	PCD 27 (02794) Revision of: IS 13360:2000	Plastics - Methods of Testing - Part 4 Rheological Properties - Section 5 Determination of the Fluidity of Plastics Using Capillary and Slit-Die Rheometers
9	PCD 27 (02769) Revision of: IS 13360:2018	Plastic - methods
10	PCD 27 (02767) Revision of: IS 13360:2017	Plastics - Methods of Testing - Part 5 Mechanical Properties - Section 7 Determination of Flexural Properties
11	PCD 27 (02793) Revision of: IS 13360:2017	Plastics - Methods of Testing - Part 5 Mechanical Properties - Section 12 Determination of Ball Indentation Hardness
12	PCD 27 (02766) Revision of: IS 13360:2017	Plastics - Methods of Testing Part 6 Thermal Properties Section 17 Determination of Temperature of Defection Under Load - Plastics and Ebonite
13	PCD 27 (02768) Revision of: IS 13360:2017	Plastics - Methods of Testing - Part 5 Mechanical Properties - Section 7 Determination of Flexural Properties
14	PCD 27 (02792) Revision of: IS 13360:2004	Plastics - Methods of Testing Part 6 Thermal Properties Section 21 Determination of Ignition Temperature Using a Hot-air Furnace
15	PCD 27 (02485) Revision of: IS 13360:2000	Plastics - Methods of testing Part 4 Rheological properties- Section 1 Determination of melt mass-flow rate MFR and the melt volume-flow rate MVR of thermoplastics Sub section 1 Standard method
16	PCD 27 (02486) Revision of: IS 13360:2000	Plastics - Methods of Testing - Part 4 Rheological Properties - Section 1 Determination of the Melt Mass-Flow Rate MFR and the Melt Volume-Flow Rate MVR of Thermoplastics
17	PCD 27 (02483)	PLASTICS - METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES Section 10 Determination of Density of Non-Cellular Plastics Immersion method liquid pyknometer method and titration method
18	PCD 27 (01483)	PLASTICS - METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES Section 11 Determination of Density of Non-Cellular Plastics Density gradient column method
19	PCD 27 (00483)	PLASTICS - METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES Section 12 Determination of Density of Non-Cellular Plastics Gas pyknometer method
20	PCD 27 (10461) Revision of: IS 13360:2018	PLASTICS METHODS OF TESTING PART 2 SAMPLING AND PREPARATION OF TEST SPECIMENS SECTION 5 MULTIPURPOSE TEST SPECIMENS
21	PCD 27 (10462) Revision of: IS 13360:2018	Plastics Methods of testing Part 5 Mechanical properties Section 1 Determination of tensile properties General principles First Revision of IS 13360 Part 5Sec 1
22	PCD 27 (10465) Revision of: IS 13360:2018	Plastics Methods of testing Part 6 Thermal properties Section 1 Determination of vicat softening temperature VST Second Revision of IS 13360 Part 6Sec 1
23	PCD 27 (10466) Revision of: IS 13360:2018	Plastics Methods of testing Part 8 Performance chemical properties Section 11 Determination of environmental stress cracking ESC Constant tensile load method First Revision of IS 13360 Part 8Sec 11
24	PCD 27 (10470) Revision of: IS 13360:2018	Plastics Methods of testing Part 11 Special properties Section 7 Determination of matter extractable by organic solvents conventional methods First Revision of IS 13360 Part 11Sec 7
25	PCD 27 (10473) Revision of: IS 13360:2018	Plastics Methods of testing Part 11 Special properties Section 9 Determination of the viscosity of polymers in dilute solution using capillary viscometers General principles First Revision of IS 13360 Part 11Sec 9
26	PCD 27 (10474) Revision of: IS 13360:2018	Plastics Methods of testing Part 8 Performancechemical properties Section 14 Determination of the effects of exposure to damp heat water spray and salt mist First Revision of IS 13360 Part 8Sec 14
27	PCD 27 (10482) Revision of: IS/ISO 14855:2000	Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions Method by analysis of evolved carbon dioxide Part 1 General method First Revision of ISISO 14855-1
28	PCD 27 (10483) Revision of: IS/ISO 15985:2014	Plastics Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions Method by analysis of released biogas First Revision of ISISO 15985
29	PCD 27 (11104)	Plastic Method of Testing Part 6 Thermal Properties Section 24 Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame of Cellular Plastic
30	PCD 27 (11107) Revision of: IS/ISO 17556:2012	Plastics Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved First Revision
31	PCD 27 (11121) Revision of: IS/ISO 16929:2013	Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test First Revision
32	PCD 27 (11122) Revision of: IS 13360:2018	Plastics Methods of testing Part 8 Permanencechemical properties Section 8 Determination of Ash General Methods First Revision
33	PCD 27 (11127)	Plastics Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test First Revision
34	PCD 27 (11129)	Determination of ultimate aerobic diodegradability of plastic materials under controlled compositing conditions - Method by analysis of evolved carbon dioxide Part 1 Gravimetric measurement of carbon dioxide evolved in laboratory - Scale test Am
35	PCD 27 (11130)	Plastics - Methods of Testing - Part 6 Thermal Properties - Section 19 Flammability by Oxygen Index - Ambient Temperature Test Amendment - 1
36	PCD 27 (11132)	Plastics - Methods of Testing - Part 2 Sampling and Preparation of Test Specimens - Section 9 Injection Moulding of Test Specimens of Thermoplastic Materials - Small Tensile Bars Amendment - 1
37	PCD 27 (11150) Revision of: IS 13360:2018	Plastics Methods Of Testing Part 8 Permanence chemical Properties Section 13 Determination of Changes in Colour and Variations in Properties After Exposure to Daylight Under Glass Natural Weathering or Laboratory Light Sources First Revision of IS 1
38	PCD 27 (11151)	Plastics - Methods of Testing Part 2 Sampling and Preparation of Test Specimens Sec 4 Preparation of Test Specimens by Machining Amendment - 1
39	PCD 27 (11532) Revision of: IS/ISO 14853:2016	Plastics Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system Method by measurement of biogas production First revision of IS ISO 14853
40	PCD 27 (11533) Revision of: IS 13360:2018	Plastics - Methods of testing Part 8 Permanencechemical properties Section 3 Determination of the Effects of the immersion in liquid Chemicals First Revision of IS 13360 Part 8 Sec 3 1997ISO 175 1981
41	PCD 27 (11534)	Plastics - Methods of testing Part 5 Mechanical properties Section 10 Determination of tear resistance of plastics films and sheeting - Trouser Tear Method First Revision of IS 13360 Part 5 Sec 10 1996 iso 6383-1 1983
42	PCD 27 (11569)	Plastics Methods of testing Part 9 Optical properties Section 10 Qualitative evaluation of the bleeding of colorants IS 13360 Part 9 Sec 10 - New standard
43	PCD 27 (11670) Revision of: IS 13360:2018	Plastics Methods of testing Part 5 Mechanical properties Section 3 Determination of tensile properties Test conditions for films and sheets First Revision of IS 13360 Part 5 Sec 3 1999
44	PCD 27 (11886)	Plastics - Methods of Testing Part 3 Physical and Dimensional Properties Sec 4 Determination of Bulk Sector of Moulding Materials Amendment - 1
45	PCD 27 (13139) Revision of: IS 13360:2019	Plastics Methods off testing Part 2 Sampling and preparation of test specimens Section 3 Injection moulding of test specimens of thermoplastic materials General principles and moulding of multipurpose and bar test specimens first revision of IS 133
46	PCD 27 (13140) Revision of: IS 13360:2019	Plastics Methods off testing Part 6 Thermal properties Section 6 Flammability by oxygen index Guidance second revision of IS 13360 Part6 Sec6 2001
47	PCD 27 (13143) Revision of: IS 13360:2019	Plastics Methods off testing Part 6 Thermal properties Section 19 Flammability by oxygen index Ambient temperature test first revision of IS 13360 Part6 Sec19 2001
48	PCD 27 (13145) Revision of: IS 13360:2019	Plastics Methods off testing Part 6 Thermal properties Section 20 Flammability by oxygen index Elevated temperature test first revision of IS 13360 Part6 Sec20 2001
49	PCD 27 (13146) Revision of: IS 13360:2019	Plastics Methods of testing Part 8 Permanence Chemical properties Section 5 Determination of migration of plasticizers first revision of IS 13360 Part 8 Sec 5 1997
50	PCD 27 (16432) Revision of: IS/ISO 17556:2012	PLASTICS DETERMINATION OF THE ULTIMATE AEROBIC BIODEGRADABILITY OF PLASTIC MATERIALS IN SOIL BY MEASURING THE OXYGEN DEMAND IN A RESPIROMETER OR THE AMOUNT OF CARBON DIOXIDE EVOLVED Second Revision
51	PCD 27 (16433) Revision of: IS/ISO 14855:2007	DETERMINATION OF THE ULTIMATE AEROBIC BIODEGRADABILITY OF PLASTIC MATERIALS UNDER CONTROLLED COMPOSTING CONDITIONS METHOD BY ANALYSIS OF EVOLVED CARBON DIOXIDE PART 2 GRAVIMETRIC MEASUREMENT OF CARBON DIOXIDE EVOLVED IN A LABORATORY-SCALE TEST Fi
52	PCD 27 (16434) Revision of: IS 13360:2018	PLASTICS METHODS OF TESTING PART 8 PERMANENCE CHEMICAL PROPERTIES SECTION 13 DETERMINATION OF CHANGES IN COLOUR AND VARIATIONS IN PROPERTIES AFTER EXPOSURE TO GLASS-FILTERED SOLAR RADIATION NATURAL WEATHERING OR LABORATORY RADIATION SOURCES Second
53	PCD 27 (16436) Revision of: IS 13360:2018	Plastics Methods of testing Part 8 Permanencechemical properties Section 8 Determination of ash General methods Second Revision
54	PCD 27 (16484) Revision of: IS 13360:2013	Plastics Methods of testing Part 5 Mechanical Properties Section 4 Determination of Izod Impact Strength Second Revision
55	PCD 27 (16487) Revision of: IS/ISO 16929:2013	PLASTICS DETERMINATION OF THE DEGREE OF DISINTEGRATION OF PLASTIC MATERIALS UNDER DEFINED COMPOSTING CONDITIONS IN A PILOT-SCALE TEST Second Revision
56	PCD 27 (17488) Revision of: IS 13360:2000	PLASTICS - Methods of Testing Part 2 Sampling and Preparation of Test Specimens Section 9 Injection Moulding of Test Specimens of Thermoplastic Materials - Small Tensile Bars First Revision
57	PCD 27 (17489) Revision of: IS 13360:1999	Plastics - Methods of testing Part 2 Sampling and preparation of test specimens Section 4 Preparation of test specimens by machining Second Revision
58	PCD 27 (17490) Revision of: IS 13360:2016	Plastics - Methods of testing Part 2 Sampling and preparation of test specimens Section 7 Injection moulding of test specimens of thermoplastic materials - Small plates Third Revision
59	PCD 27 (17492) Revision of: IS 13360:2016	Plastics Methods of Testing Part 3 Physical and Dimensional Properties Section 11 Determination of Density of Non-cellular Plastics Density Gradient Column Method First Revision
60	PCD 27 (17493) Revision of: IS 13360:2016	Plastics Methods of Testing Part 3 Physical and Dimensional Properties Section 10 Determination of Density of Non-cellular Plastics Immersion Method Liquid Pyknometer Method and Titration Method First Revision
61	PCD 27 (17495) Revision of: IS 13360:2018	Plastics - Methods of testing Part 5 Mechanical properties Section 1 Determination of tensile properties - General requirements Second Revision
62	PCD 27 (17726)	Plastics Methods of Exposure to Laboratory Light Sources Part 1 General Guidance
63	PCD 27 (17727)	Plastics Methods of Exposure to Laboratory Light Sources Part 2 Xenon-Arc Lamps
64	PCD 27 (17728)	Plastics Methods of Exposure to Laboratory Light Sources Part 3 Fluorescent UV Lamps
65	PCD 27 (17729)	Plastics Methods of Exposure to Laboratory Light Sources Part 4 Open-Flame Carbon-Arc Lamps
66	PCD 27 (17730)	Plastics Methods of Testing Part 5 Mechanical Properties Section 27 Determination of tensile-impact strength
67	PCD 27 (17740)	Plastics Instrumental Determination of Radiant Exposure in Weathering Tests General Guidance and Basic Test Method
68	PCD 27 (18134) Revision of: IS 13360:1997	Plastics Methods of Testing Part 8 PermanenceChemical Properties Section 1 Determination of Water Absorption First Revision
69	PCD 27 (18138) Revision of: IS 13360:2000	Plastics - Methods of Testing Part 4 Rheological Properties Section 5 Determination of the Fluidity of Plastics Using Capillary and Slit - Die Rheometers First Revision
70	PCD 27 (18139) Revision of: IS/ISO 14852:1999	Determination of the Ultimate Aerobic Biodegradability of Plastic Materials in an Aqueous Medium Method by Analysis of Evolved Carbon Dioxide First Revision
71	PCD 27 (18140) Revision of: IS/ISO 14851:1999	Determination of the Ultimate Aerobic Biodegradability of Plastic Materials in an Aqueous Medium Method by Measuring the Oxygen Demand in A Closed respirometer First Revision
72	PCD 27 (18145)	Plastics Environmental Aspects State of Knowledge and Methodologies
73	PCD 27 (18146)	Plastics Determination of Aerobic Biodegradation of Non-Floating Plastic Materials in a SeawaterSandy Sediment Interface - Method by Measuring the Oxygen Demand In Closed Respirometer
74	PCD 27 (18151)	Plastics Determination of Aerobic Biodegradation of Non-Floating Plastic Materials in A SeawaterSediment Interface Method by Analysis of Evolved Carbon Dioxide
75	PCD 27 (18154)	Plastics Assessment of the intrinsic biodegradability of materials exposed to marine inocula under mesophilic aerobic laboratory conditions Test methods and requirements
76	PCD 27 (18155)	Plastics Determination of the Aerobic Biodegradation of Non-Floating Materials Exposed To Marine Sediment Method by Analysis of Evolved Carbon Dioxide
77	PCD 27 (18157)	Plastics Determination of the Degree of Disintegration of Plastic Materials in Marine Habitats under Real Field Conditions
78	PCD 27 (18729) Revision of: IS 13360:1997	PLASTICS - METHODS OF TESTING PART 8 PERMANENCECHEMICAL PROPERTIES SECTION 9 DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC BENT STRIP METHOD
79	PCD 27 (18730) Revision of: IS 13360:2006	PLASTICS - METHODS OF TESTING PART 11 SPECIAL PROPERTIES Section 15 Determination of Viscosity using a Falling-Ball Viscometer Inclined-tube method
80	PCD 27 (18731) Revision of: IS 13360:1999	PLASTICS - METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 10 RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS DETERMINATION OF APPARENT VISCOSITY BY THE BROOKFIELD TEST METHOD
81	PCD 27 (18732) Revision of: IS 13360:2000	PLASTICS METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 3 FILM AND SHEETING DETERMINATION OF BLOCKING RESISTANCE
82	PCD 27 (18733) Revision of: IS 13360:2017	PLASTICS METHOD OF TESTING PART 6 THERMAL PROPERTIES SECTION 3 DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD GENERAL TEST METHOD
83	PCD 27 (18734) Revision of: IS 13360:2017	PLASTICS METHOD OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 7 DETERMINATION OF FLEXURAL PROPERTIES
84	PCD 27 (18736) Revision of: IS 13360:2018	PLASTICS METHOD OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 3 DETERMINATION OF TENSILE PROPERTIES TEST CONDITIONS FOR FILMS AND SHEETS
85	PCD 27 (18769)	Amendment No 1 Plastics - Methods of testing Part 6 thermal properties section 23 determination of burning behaviour of thin fiexibie verticai specimens in contact with smaii - Fiame ignition source
86	PCD 27 (19544)	PLASTICS METHODS FOR THE PREPARATION OF SAMPLES FOR BIODEGRADATION TESTING OF PLASTIC MATERIALS
87	PCD 27 (19545)	PLASTICS DETERMINATION OF THE ULTIMATE ANAEROBIC BIODEGRADATION OF PLASTIC MATERIALS IN CONTROLLED SLURRY DIGESTION SYSTEMS METHOD BY MEASUREMENT OF BIOGAS PRODUCTION
88	PCD 27 (19546)	PLASTICS BIOBASED CONTENT PART 1 GENERAL PRINCIPLES
89	PCD 27 (19547)	PLASTICS BIOBASED CONTENT PART 2 DETERMINATION OF BIOBASED CARBON CONTENT
90	PCD 27 (19549)	PLASTICS BIOBASED CONTENT PART 3 DETERMINATION OF BIOBASED SYNTHETIC POLYMER CONTENT
91	PCD 27 (19550)	PLASTICS BIOBASED CONTENT PART 4 DETERMINATION OF BIOBASED MASS CONTENT
92	PCD 27 (19551)	PLASTICS BIOBASED CONTENT PART 5 DECLARATION OF BIOBASED CARBON CONTENT BIOBASED SYNTHETIC POLYMER CONTENT AND BIOBASED MASS CONTENT
93	PCD 27 (19552)	PLASTICS ENVIRONMENTAL ASPECTS GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS
94	PCD 27 (19553)	PLASTICS CARBON AND ENVIRONMENTAL FOOTPRINT OF BIOBASED PLASTICS PART 1 GENERAL PRINCIPLES
95	PCD 27 (19554)	PLASTICS CARBON AND ENVIRONMENTAL FOOTPRINT OF BIOBASED PLASTICS PART 2 MATERIAL CARBON FOOTPRINT AMOUNT MASS OF CO2 REMOVED FROM THE AIR AND INCORPORATED INTO POLYMER MOLECULE
96	PCD 27 (19565)	PLASTICS DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY PART 1 GENERAL PRINCIPLES
97	PCD 27 (19566)	PLASTICS DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY PART 2 UNIVERSAL CALIBRATION METHOD
98	PCD 27 (19567)	PLASTICS DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY PART 3 LOW-TEMPERATURE METHOD
99	PCD 27 (19568)	PLASTICS DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY PART 4 HIGH-TEMPERATURE METHOD
100	PCD 27 (19569)	PLASTICS DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY PART 5 LIGHT-SCATTERING METHOD
101	PCD 27 (20348) Revision of: IS 13360:2004	PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 21 DETERMINATION OF IGNITION TEMPERATURE USING A HOT-AIR FURNACE
102	PCD 27 (20350) Revision of: IS 13360:2018	PLASTICS METHODS OF TEST PART 11 SPECIAL PROPERTIES SECTION 9 DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS GENERAL PRINCIPLES
103	PCD 27 (20353) Revision of: IS 13360:2013	PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 10 DETERMINATION OF MELTING BEHAVIOUR MELTING TEMPERATURE OR MELTING RANGE OF SEMI-CRYSTALLINE POLYMERS BY CAPILLARY TUBE AND POLARIZING - MICROSCOPE METHODS
104	PCD 27 (20426) Revision of: IS 13360:2001	PLASTICS METHODS OF TESTING PART 9 OPTICAL PROPERTIES Section 7 Determination of Specular Gloss of Plastic Films and Solid Plastics
105	PCD 27 (20427) Revision of: IS 13360:2001	PLASTICS METHODS OF TESTING PART 9 OPTICAL PROPERTIES Section 8 Determination of Transparency of Plastic Sheeting
106	PCD 27 (20428) Revision of: IS 9591:1996	PLASTICIZER ESTERS METHODS OF SAMPLING AND TESTS
107	PCD 27 (20430) Revision of: IS 13055:1991	METHODS OF SAMPLING AND TEST FOR ANAEROBIC ADHESIVES AND SEALANTS
108	PCD 27 (20432) Revision of: IS 13360:2018	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 26 DETERMINATION OF TENSILE PROPERTIES TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES
109	PCD 27 (20433) Revision of: IS 13360:2018	PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 24 CELLULAR PLASTICS DETERMINATION OF HORIZONTAL BURNING CHARACTERISTICS OF SMALL SPECIMENS SUBJECTED TO A SMALL FLAME
110	PCD 27 (20434) Revision of: IS 13360:1996	PLASTICS METHODS OF TESTING PART 7 ELECTRICAL PROPERTIES SECTION 1 MEASUREMENT OF RESISTIVITY OF CONDUCTIVE PLASTICS
111	PCD 27 (23124) Revision of: IS 13360:2001	PLASTICS METHODS OF TESTING PART 9 OPTICAL PROPERTIES SECTION 9 DETERMINATION OF YELLOW INDEX AND CHANGE IN YELLOWNESS INDEX First Revision
112	PCD 27 (23125) Revision of: IS 11022:1984	METHODS OF SAMPLING AND TEST FOR GLUES BONE SKIN FLESHINGS AND FISH GLUES First Revision
113	PCD 27 (23126) Revision of: IS 13360:1997	PLASTICS METHODS OF TESTING PART 8 PERMANENCE CHEMICAL PROPERTIES SECTION 6 FILM AND SHEETING DETERMINATION OF GAS-TRANSMISSION RATE SUB-SECTION 1 DIFFERENTIAL-PRESSURE METHODS First Revision
114	PCD 27 (23127) Revision of: IS 13360:1997	PLASTICS METHODS OF TESTING PART 8 PERMANENCE CHEMICAL PROPERTIES SECTION 6 FILM AND SHEETING DETERMINATION OF GAS-TRANSMISSION RATE SUB-SECTION 2 EQUAL-PRESSURE METHOD First Revision
115	PCD 27 (23183) Revision of: IS 13360:1995	PLASTICS METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES SECTION 4 DETERMINATION OF BULK FACTOR OF MOULDING MATERIALS First Revision
116	PCD 27 (23184) Revision of: IS 13360:2017	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 5 DETERMINATION OF CHARPY IMPACT PROPERTIES SUBSEC 1 NON-INSTRUMENTED IMPACT TEST Second Revision
117	PCD 27 (23186) Revision of: IS 13360:2017	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 5 DETERMINATION OF CHARPY IMPACT PROPERTIES SUB-SECTION 2 INSTRUMENTED IMPACT TEST Second Revision
118	PCD 27 (23190) Revision of: IS 13360:2018	Plastics Methods of Testing Part 4 Rheological Properties Section 1 Determination of the Melt Mass-Flow Rate MFR and the Melt Volume-Flow Rate MVR of Thermoplastics Sub-section 1 Standard Method Third Revision
119	PCD 27 (24009) Revision of: IS 13360:2001	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 14 DETERMINATION OF INDENTATION HARDNESS OF RIGID PLASTIC BY BARCOL IMPRESSOR First Revision
120	PCD 27 (24010) Revision of: IS 13360:2001	Plastics Methods of Testing Part 6 Thermal Properties Section 9 Determination of Density of Smoke from the Burning or Decomposition of Plastics First Revision
121	PCD 27 (24011) Revision of: IS 13360:1992	Plastics Methods of Testing Part 1 Introduction First Revision
122	PCD 27 (24269) Revision of: IS 13360:2018	PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 1 DETERMINATION OF VICAT SOFTENING TEMPERATURE OF THERMOPLASTIC MATERIALS Third Revision
123	PCD 27 (24270) Revision of: IS 13360:2016	PLASTICS METHODS OF TESTING PART 2 SAMPLING AND PREPARATION OF TEST SPECIMENS SECTION 1 PLASTICS COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS Second Revision
124	PCD 27 (24271)	PRINCIPLES FOR THE ANALYSIS OF MICROPLASTICS PRESENT IN THE ENVIRONMENT
125	PCD 27 (25101)	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 28 DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS SUBSECTION 1 NON-INSTRUMENTED IMPACT TESTING
126	PCD 27 (25102)	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 28 DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS SUBSECTION 2 INSTRUMENTED IMPACT TESTING
127	PCD 27 (25103)	PLASTICS VERIFICATION OF PENDULUM IMPACT-TESTING MACHINES CHARPY IZOD AND TENSILE IMPACT-TESTING
128	PCD 27 (25104)	PLASTICS METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES SECTION 13 DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS
129	PCD 27 (25105)	PLASTICS QUANTITATIVE EVALUATION OF SCRATCH -INDUCED DAMAGE AND SCRATCH VISIBILITY
130	PCD 27 (25106)	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 29 DETERMINATION OF TENSILE PROPERTIES AT HIGH STRAIN RATES
131	PCD 27 (25107)	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 30 DETERMINATION OF SCRATCH PROPERTIES
132	PCD 27 (25510)	PLASTICS METHODOLOGY FOR ASSESSING POLYMER PHOTOAGEING BY FTIR AND UVVISIBLE SPECTROSCOPY
133	PCD 27 (25511)	MEASUREMENT OF ANTIVIRAL ACTIVITY ON PLASTICS AND OTHER NON-POROUS SURFACES
134	PCD 27 (25512)	PLASTICS SMALL ENCLOSURES FOR CONDITIONING AND TESTING USING AQUEOUS SOLUTIONS TO MAINTAIN THE HUMIDITY AT A CONSTANT VALUE
135	PCD 27 (25513)	PLASTICS METHODS FOR MARINE EXPOSURE
136	PCD 27 (25514)	PLASTICS ASSESSMENT OF THE EFFECTIVENESS OF FUNGISTATIC COMPOUNDS IN PLASTICS FORMULATIONS
137	PCD 27 (25515)	PLASTICS METHODS OF EXPOSURE TO DETERMINE THE WAVELENGTH DEPENDENT DEGRADATION USING SPECTRALLY DISPERSED RADIATION
138	PCD 27 (25516)	MEASUREMENT OF ANTIBACTERIAL ACTIVITY ON PLASTICS AND OTHER NON-POROUS SURFACES
139	PCD 27 (25517)	PLASTICS ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
140	PCD 27 (25518)	PLASTICS METHODS OF TESTING PART 8 PERMANENCE CHEMICAL PROPERTIES SECTION 15 DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC GENERAL GUIDANCE
141	PCD 27 (25520)	PLASTICS METHODS OF TESTING PART 8 PERMANENCE CHEMICAL PROPERTIES SECTION 17 DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC BALL OR PIN IMPRESSION METHOD
142	PCD 27 (25521)	PLASTICS METHODS OF TESTING PART 8 PERMANENCE CHEMICAL PROPERTIES SECTION 18 DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC CONSTANT TENSILE DEFORMATION METHOD
143	PCD 27 (25522)	PLASTICS METHODS OF TESTING PART 8 PERFORMANCECHEMICAL PROPERTIES SECTION 16 DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC SLOW STRAIN RATE METHOD
144	PCD 27 (25745)	PLASTICS PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 1 GENERAL PRINCIPLES METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 1 GENERAL PRINCIPLES
145	PCD 27 (25746)	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 2 TORSION-PENDULUM METHOD
146	PCD 27 (25747)	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 3 FLEXURAL VIBRATION RESONANCE-CURVE METHOD
147	PCD 27 (25748)	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 4 TENSILE VIBRATION NON-RESONANCE METHOD
148	PCD 27 (25749)	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 5 FLEXURAL VIBRATION NON-RESONANCE METHOD
149	PCD 27 (25750)	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL ROPERTIES SUBSEC 6 SHEAR VIBRATION NON-RESONANCE METHOD
150	PCD 27 (25751)	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 7 TORSIONAL VIBRATION NON-RESONANCE METHOD
151	PCD 27 (25752)	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 8 LONGITUDINAL AND SHEAR VIBRATION WAVE-PROPAGATION METHOD
152	PCD 27 (25753)	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 9 TENSILE VIBRATION SONIC-PULSE PROPAGATION METHOD
153	PCD 27 (25754)	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 10 COMPLEX SHEAR VISCOSITY USING A PARALLEL-PLATE OSCILLATORY RHEOMETER
154	PCD 27 (25755)	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 11 GLASS TRANSITION TEMPERATURE
155	PCD 27 (25756)	PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC 31 DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 12 COMPRESSIVE VIBRATION NON-RESONANCE METHOD
156	PCD 27 (26737) Revision of: IS 867:1963	PHENOLIC MOULDING MATERIALS - METHODS OF TEST Second Revision
157	PCD 27 (26738) Revision of: IS 2221:1962	AMINOPLASTIC MOULDING MATERIALS - METHODS OF TEST First Revision
158	PCD 27 (26739) Revision of: IS 2530:1963	POLYETHYLENE MOULDING MATERIALS AND POLYETHYLENE COMPOUNDS - METHODS OF TEST First Revision
159	PCD 27 (26740) Revision of: IS 4669:1968	METHODS OF TEST POLYVINYL CHLORIDE RESINS First Revision
160	PCD 27 (27130) Revision of: IS 13360:1997	PLASTICS METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES Section 2 Determination of Apparent Density of Material that Can be Poured from a Specified Funnel First Revision
161	PCD 27 (27131) Revision of: IS 13360:1997	PLASTICS METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES Section 3 Determination of Apparent Density of moulding Material that cannot be Poured from a Specified Funnel First Revision
162	PCD 27 (27132) Revision of: IS 13360:1999	PLASTICS METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES Section 7 Liquid Resins Determination of Density by the Pyknometer Method First Revision
163	PCD 27 (27749) Revision of: IS 13360:1999	Plastics - Methods of testing Part 4 Rheological Properties Section 2 Cup Flow of Phenolic and Alkyd Moulding Materials First Revision
164	PCD 27 (27750) Revision of: IS 13360:1999	PLASTICS METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 11 RHEOLOGY SUBSECTION 1 VOCABULARY AND SYMBOLS FOR ROTATIONAL AND OSCILLATORY RHEOMETRY First Revision
165	PCD 27 (27751) Revision of: IS 13360:1999	PLASTICS METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 11 RHEOLOGY SUBSECTION 2 GENERAL PRINCIPLES OF ROTATIONAL AND OSCILLATORY RHEOMETRY First Revision
166	PCD 27 (28355) Revision of: IS 7188:1974	METHODS OF TEST CELLULOSE ACETATE FLAKES first revision
167	PCD 27 (28356) Revision of: IS 7437:1974	METHODS OF SAMPLING AND TEST VEGETABLE ADHESIVES First Revision
168	PCD 27 (28357) Revision of: IS 8543:1978	PLASTICS METHODS OF TESTING PART 1 CHARACTERIZATION OF POLYMER STRUCTURE AND SIZE SECTION 1 DETERMINATION OF MOLECULAR MASS FROM VISCOSITY first revision
169	PCD 27 (28379) Revision of: IS 13360:1999	PLASTICS METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES Section 9 Determination of Moisture First Revision
170	PCD 27 (28405)	PLASTICS EVALUATION OF THE ACTION OF MICROORGANISMS
171	PCD 27 (34045)	Determination of overall migration of constituents of plastics materials and articles intended to come in contact with foodstuffs - Method of analysis Second Revision
172	PCD 27 (34047)	Plastics - Methods of Testing Part 5 Mechanical Properties Sec 4 Determination of Izod Impact Strength
173	PCD 27 (34048)	Plastics - Methods of testing Part 9 optical properties section 1 determination of refractive index
174	PCD 27 (34049)	Plastics - Methods of testing Part 5 mechanical properties section 25 determination of tensile properties - Test conditions for isotropic and orthotropic fibre - Reinforced plastic composites
175	PCD 27 (34050)	Plastics Methods of Testing Part 3 Physical and Dimensional Properties Section 10 Determination of Density of Non-cellular Plastics Immersion Method Liquid Pyknometer Method and Titration Method First Revision

Total Published Standards:176 Total Standards Under development : 175

Aspect Wise Report

Product:	0
Code of Practices :	0
Methods of Test :	160
Terminology :	1
Dimensions :	0
System Standard :	0
Safety Standard :	0
Others :	1
Service Specification :	0
Process Specification :	0
Unclassified :	14

Total :176

Annexure-I :List of Indian Standards Withdrawn/Superseded

SI. No.	IS No.	Title
1.	IS 13360 (Part 3/Sec 1):1995 ISO 1183	Plastics - Methods of Testing - Part 3 Physical and Dimensional Properties - Section 1 Determination of Density and Relative Density of Non-Cellular Plastics
2.	IS 13360 (Part 6/Sec 4):1997 ISO 1210	Plastics - Methods of Testing Part 6 Thermal properties Sec 4 Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
3.	IS 13360 (Part 6/Sec 5):2001	Plastics - Methods of Testing - Part 6 Thermal Properties - Section 5 Determination of Flammability of Plastic Materials for Parts and Devices in Appliances

Annexure-II :List of Indian Product Standards

SI. No.	IS No. & Year	Title
No Records Found