BUREAU OF INDIAN STANDARDS
Programme of Work
PGD32 : Cutting Tools
- Scope : Standardization in the field of twist drills, reamers, countersink and counterbore, drills, screwing taps, dies and other threading tools, milling cutters and milling machine arbors and accessories, saw and saw blades, gear cutting tools, broaches and their holding devices, single point tools, carbide tips, indexable (Throwaway) inserts, tool shanks, tool blanks and hard metal burrs.
-
Liaison :ISO/TC 29 - Small tools - Participating (P)
ISO/TC 29/SC 9 - Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces - Participating (P)
|
IS 10140:1982 ISO 3295 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for bandsaw blades for woodworking
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 10255:1982 ISO 3940 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for tapered die-sinking cutters with parallel shanks
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 10293:1982 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Dimensions for optional recess on morse taper shanks for tools
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 10412:1983 ISO 504 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
System of designation and marking of single point cutting tools with carbide tips
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 10465:1983 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for chain wheel rotary tooth form milling cutter
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 10514:1983 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for split taper socket for tools with parallel shank and driving tenon
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 10571:1983 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for split taper sockets for tools with parallel shank, driving square and driving tenon
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 10591:1983 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for segmental saws for cold sawing
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 10608:1998 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Spline hobs -- Straight sided specification (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 10851:1984 ISO 3465 Reviewed In : 2021 |
Specification for taper pin machine reamers with parallel shanks
|
January, 2021
|
1
|
Not Equivalent
|
|
|
IS 10884:1984 Reviewed In : 2022 |
Specification for carbide tipped chucking reamers with parallel shanks
|
December, 2022
|
2
|
Indigenous
|
|
|
IS 10885:1984 Reviewed In : 2021 |
Specification for carbide tipped chucking reamers with morse taper shanks with short cutting edge
|
January, 2021
|
2
|
Indigenous
|
|
|
IS 10915:1984 ISO 5419 Reviewed In : 2021 |
Terms, definitions and types of twist drills
|
January, 2021
|
1
|
Not Equivalent
|
|
|
IS 10952:1984 ISO 2306 Reviewed In : 2021 |
Recommendations for drills for use prior to tapping screw threads
|
January, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 11002:1984 Reviewed In : 2021 |
Specification for machine jig reamers morse taper shank
|
January, 2021
|
2
|
Indigenous
|
|
|
IS 11127:1984 Reviewed In : 2021 |
Specification for holders for knurling wheels
|
January, 2021
|
-
|
Indigenous
|
|
|
IS 11143:1984 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for ground high speed steel tool bits
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 11172 (Part 1):2018 ISO 10889-1 : 2004 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Tool holders with cylindrical shank: Part 1 Cylindrical shank, location bore -- Specification (first revision)
|
August, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 11351:2005 Reviewed In : 2021 |
Stub self-holding tapers -- Dimensions (first revision)
|
January, 2021
|
-
|
Indigenous
|
|
|
IS 11441:1985 Reviewed In : 2021 |
Dimensions for ground carbide rounds
|
January, 2021
|
1
|
Indigenous
|
|
|
IS 11522 (Part 1):1986 ISO 3002-1 Reviewed In : 2018 |
Recommendations for basic quantities in cutting and grinding: Part 1 Geometry of the active part of cutting tools, general terms, reference systems, tool and working angles and chip breakers
|
November, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 11522 (Part 2):2015 ISO 3002-2 : 1982 Reviewed In : 2019 |
Basic quantities in cutting and grinding: Part 2 Geometry of the active part of cutting tools -- General conversion formulae to relate tool and working angles
|
December, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 11522 (Part 5):2017 ISO 3002-5 : 1989 |
Basic quantities in cutting and grinding: Part 5 Basic terminology for grinding processes using grinding wheels
|
-
|
Identical under dual numbering
|
||
|
IS 11523:1998 ISO 3365 Reviewed In : 2018 |
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole -- Dimensions (first revision)
|
November, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 11677:2004 ISO 3364 Reviewed In : 2021 |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole -- Dimensions (first revision)
|
January, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 11741:1986 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for circular saws for wood working
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 11829:1986 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for miniature hand hacksaw blades
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 11835 (Part 1):2005 Reviewed In : 2021 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools: Part 1 Dimensions of the driving system of tool shanks (first revision)
|
January, 2021
|
-
|
Not Equivalent
|
|
|
IS 11835 (Part 2):2004 ISO 5414-2 Reviewed In : 2021 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools: Part 2 Connecting dimensions of chucks and designation (first revision)
|
January, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 11934:1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for carbide tipped shell reamers
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 11935:1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for carbide tipped chucking reamers with morse taper shank with long cutting edge
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 11936:1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for carbide tipped long fluted machine reamer with morse taper shank
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 11937:1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for carbide tipped machine jig reamer with morse taper shank
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 11938:1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for tool adaptors for numerically controlled machine tools (Tool rotating type)
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 11949:1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for turret sockets
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 11950:1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for tool adaptors for numerically controlled machine tools (Tool stationary type)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 12319:1988 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Circular screwing dies -- General table of dimensions
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 12321:1988 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for circular screwing dies for ISO metric threads
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 12322:1988 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for circular screwing dies for taper pipe threads, R - Series
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 12323:1988 Reviewed In : 2021 |
Specification for circular screwing dies for parallel pipe threads, G series
|
January, 2021
|
-
|
Not Equivalent
|
|
|
IS 12324:1988 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for hexagonal die nuts
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 12325:1988 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for circular screwing dies for ISO metric conduit pipe threads
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 12354:2002 ISO 6987 Reviewed In : 2018 |
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole -- Dimensions (first revision)
|
November, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 12536:1989 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools -- Disc type gear shaper cutters -- Specification
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 12537:1989 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools -- Shank type gear shaper cutter -- Specification
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 12538:1989 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools -- Shank type gear shaper cutter -- Specification
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 12687:1989 Reviewed In : 2023 |
Small tools -- Subland twist drills with morse taper shank for holes prior to tapping screw threads -- Specification
|
June, 2023
|
1
|
Not Equivalent
|
|
|
IS 12688:1989 ISO 3439 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools -- Subland twist drills with parallel morse taper shank for clearance holes and countersinks head screws -- Specification
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 12689:1989 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools -- Subland twist drills with morse taper shank for clearance holes and counterbores for slotted cheese head screws -- Specification
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 12690:1989 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small Tools -- Subland twist drills with morse taper shank for clearance holes and counterbores for slotted cheese head screws -- Specification
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 12691:2013 ISO3439:2003 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Subland Twist Drills with Cyliindrical Shanks for Holes Prior to Tapping Screw Threads
|
August, 2024
|
-
|
||
|
IS 12692:1989 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools -- Subland twist drills with parallel shanks for clearance holes and countersinks for countersunk head screws -- Specification
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 12716:2002 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
End mills with indexable specification (first revision)
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 12728:1989 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tips for dead centres -- Specification
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 13244:1991 Reviewed In : 2021 |
Half side and face cutters with indexable inserts -- Specification
|
January, 2021
|
-
|
Indigenous
|
|
|
IS 13303:1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Countersinks 60-degree, 90-degree and 120-degree with morse taper shank -- Specification
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 13304:1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Countersinks 60°,90° and 120° with parallel shank -- Specification
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 13741 (Part 1):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tips: Part 1 Carbide tips for single point tools -- Specification
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 13741 (Part 2):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tips: Part 2 Carbide tips for single point tools for light cutting operations -- Specification
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 13741 (Part 3):1993 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Carbide tips: Part 3 Carbide tips for single point tool blanks for sliding head type automats -- Specification
|
November, 2018
|
-
|
Indigenous
|
|
|
IS 13741 (Part 4):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tips: Part 4 Carbide tips for multi point tools -- Specification
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 13741 (Part 5):1993 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Carbide tips: Part 5 Carbide tips for twist drills with point angle 115 degree C -- Specification
|
November, 2018
|
1
|
Indigenous
|
|
|
IS 13741 (Part 6):1993 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Carbide tips: Part 6 Carbide tips for single point threading tools -- Specification
|
November, 2018
|
-
|
Indigenous
|
|
|
IS 13741 (Part 7):1993 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Carbide tips: Part 7 Carbide tips for single point round nose turning tools -- Speciification
|
November, 2018
|
-
|
Indigenous
|
|
|
IS 13742 (Part 1):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped single point tools ISO series: Part 1 Straight turning tool (ISO 1 ) -- Specification
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 13742 (Part 2):1993 Reviewed In : 2019 |
Carbide tipped single point tools -- ISO series: Part 2 Cranked turning and facing tool (ISO 2) -- Specification
|
December, 2019
|
1
|
Indigenous
|
|
|
IS 13742 (Part 3):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped single point tools -- ISO series: Part 3 Cranked finishing tool (ISO 3) -- Specification
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 13742 (Part 4):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped single point tools -- ISO series: Part 4 Broad turning tool (ISO 4) -- Specification
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 13742 (Part 5):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tips: Part 5 Carbide tips twist drills with point angle 115 degree -- Specification
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 13742 (Part 6):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped single point tool ISO series: Part 6 Cranked turning tool (ISO 6) -- Specification
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 13742 (Part 7):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped single point tools ISO series: Part 7 Parting off tool (ISO 7) -- Specification
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 13742 (Part 8):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped single point tools -- ISO series: Part 8 boring tool (ISO 8) -- Specification
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 13742 (Part 9):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped single point tools -- ISO series: Part 9 Boring and facing tool (ISO 9) -- Specification
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 13743 (Part 110):1997 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped single point tools -- Ind series -- Specification
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 13744 (Part 18):1995 Reviewed In : 2021 |
Carbide tipped single point planing tools -- specification
|
January, 2021
|
1
|
Indigenous
|
|
|
IS 13776:1993 ISO 1080 Reviewed In : 2023 |
Machine tools morse taper shanks -- Cotter slots taper keys
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 14168:2017 ISO 6986 : 2013 |
Side and face milling (Slotting) cutters with indexable inserts -- Dimensions (first revision)
|
-
|
-
|
Identical under dual numbering
|
|
|
IS 14532:1998 ISO 3936 Reviewed In : 2023 |
Reduction sleeves with tenon drive with external and internal 7/24 taper -- Dimensions
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 14585:1998 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Spline hobs -- Involute sided -- Specification
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 14586:1998 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Serration hobs -- Straight sided -- Specification
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 14775:2000 ISO 10898 Reviewed In : 2021 |
Spot drills -- Dimensions
|
January, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 14863:2018 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Turning and copying tool holders and cartridges for indexable inserts -- Designation (first revision)
|
August, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 14867:2000 ISO 5611 Reviewed In : 2021 |
Cartridges, type A, for indexable inserts -- Dimensions
|
January, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 14867 (Part 2):2019 ISO 5611-2 : 2015 Reviewed In : 2023 |
Cartridges, type A, for indexable inserts: Part 2 Style F
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 14867 (Part 3):2019 ISO 5611-3 : 2015 Reviewed In : 2023 |
Cartridges, type A, for indexable inserts: Part 3 Style G
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 14867 (Part 4):2019 ISO 5611-4 : 2015 Reviewed In : 2023 |
Cartridges, type A, for indexable inserts: Part 4 Style J
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 14867 (Part 5):2019 ISO 5611-5 : 2015 Reviewed In : 2023 |
Cartridges, type A, for indexable inserts: Part 5 Style K
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 14867 (Part 6):2019 ISO 5611-6 : 2015 Reviewed In : 2023 |
Cartridges, type A, for indexable inserts: Part 6 Style l
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 14867 (Part 7):2019 ISO 5611-7 : 2015 Reviewed In : 2023 |
Cartridges, type A, for indexable inserts: Part 7 Style R
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 14867 (Part 8):2019 ISO 5611-8 : 2015 Reviewed In : 2023 |
Cartridges, type A, for indexable inserts: Part 8 Style S
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 14867 (Part 10):2019 ISO 5611-10 : 2015 Reviewed In : 2023 |
Cartridges, type A, for indexable inserts: Part 10 Style U
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 14867 (Part 11):2019 ISO 5611-11 : 2015 Reviewed In : 2023 |
Cartridges, type A, for indexable inserts: Part 11 Style W
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 14867 (Part 12):2019 ISO 5611-2 : 2015 Reviewed In : 2023 |
Cartridges, type A, for indexable inserts: Part 12 Style Y
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15067:2001 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
End mills with brazed helical hard metal tips -- Dimensions
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 15075:2024 ISO 5468:2017 |
Rotary and rotary impact masonry drill bits with hard metal tips -- Dimensions (first revision)
|
-
|
Identical under dual numbering
|
||
|
IS 15091 (Part 1):2002 ISO 9361-1 Reviewed In : 2018 |
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners: Part 1 Dimensions of inserts without fixing hole
|
November, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 15091 (Part 2):2004 ISO 9361-2 Reviewed In : 2021 |
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners: Part 2 dimensions of inserts with cylindrical fixing hole
|
January, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 15092:2024 ISO 3286:2016 |
Single point cutting tools — Corner radii (first revision)
|
-
|
Identical under dual numbering
|
||
|
IS 15094:2002 ISO 10910 Reviewed In : 2023 |
Classification and designation of approximate chip control zones for indexable inserts with chip breakers
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15144:2002 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Indexable hardmetal (Carbide) inserts with rounded corners with partly cylindrical fixing hole -- Dimensions of inserts with 7° normal clearance for light alloy and plastic components turning
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 15762:2007 ISO 5413 Reviewed In : 2017 |
Machine tools -- Positive drive of morse tapers
|
September, 2017
|
-
|
Identical under dual numbering
|
|
|
IS 15777:2008 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Selection of hacksaw tooth for metal cutting -- Recommendations
|
August, 2024
|
-
|
Indigenous
|
|
|
IS B15777:2008 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Selection of Hacksaw Tooth for Metal Cutting – Recommendations
|
August, 2024
|
-
|
||
|
IS 16059:2013 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Solid carbide parallel shank twist drills jobber series -- Specification
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 16060:2013 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Solid carbide parallel shank twist drills stub series -- Specification
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 16136:2013 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Solid carbide end mills with continuous parallel shank -- Specification
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 16176:2014 Reviewed In : 2019 |
Ratchet pipe threader for taper pipe threads (R - Series) -- Specification
|
December, 2019
|
1
|
Indigenous
|
|
|
IS 16435:2017 |
Solid carbide end mills with stepped parallel shank -- Specification
|
-
|
Not Equivalent
|
||
|
IS 16637 (Part 1):2018 ISO 5610-1 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts: Part 1 General survey, correlation and determination of dimensions
|
June, 2023
|
-
|
Identical under single numbering
|
|
|
IS 16637 (Part 2):2018 ISO 5610-2 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts: Part 2 Style A
|
June, 2023
|
-
|
Identical under single numbering
|
|
|
IS 16637 (Part 4):2018 ISO 5610-4 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts: Part 4 Style D
|
June, 2023
|
-
|
Identical under single numbering
|
|
|
IS 16637 (Part 5):2018 ISO 5610-5 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts: Part 5 Style F
|
June, 2023
|
-
|
Identical under single numbering
|
|
|
IS 16637 (Part 6):2018 ISO 5610-6 : 2010 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts: Part 6 Style G
|
June, 2023
|
-
|
Identical under single numbering
|
|
|
IS 16637 (Part 7):2018 ISO 5610-7 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts: Part 7 Style J
|
June, 2023
|
-
|
Identical under single numbering
|
|
|
IS 16637 (Part 8):2018 ISO 5610-8 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts: Part 8 Style K
|
June, 2023
|
-
|
Identical under single numbering
|
|
|
IS 16637 (Part 9):2018 ISO 5610-9 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts: Part 9 Style l
|
June, 2023
|
-
|
Identical under single numbering
|
|
|
IS 16637 (Part 10):2018 ISO 5610-10 : 2014 Reviewed In : 2023 |
Tool Holders with rectangular shank for Indexable Inserts: Part 10 Style N
|
June, 2023
|
-
|
Identical under single numbering
|
|
|
IS 16637 (Part 11):2018 ISO 5610-11 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts: Part 11 Style R
|
June, 2023
|
-
|
Identical under single numbering
|
|
|
IS 16637 (Part 12):2018 ISO 5610-12 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts: Part 12 Style S
|
June, 2023
|
-
|
Identical under single numbering
|
|
|
IS 16637 (Part 13):2018 ISO 5610 -13 : 2014 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Tool holders with rectangular shank for indexable inserts: Part 13 Style T
|
August, 2024
|
-
|
Identical under single numbering
|
|
|
IS 16637 (Part 14):2018 ISO 5610 -14 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts: Part 14 Style H
|
June, 2023
|
-
|
Identical under single numbering
|
|
|
IS 16637 (Part 15):2018 ISO 5610-15 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts: Part 15 Style V
|
June, 2023
|
-
|
Identical under single numbering
|
|
|
IS 16992 (Part 1):2018 ISO 13399-1 : 2006 Reviewed In : 2023 |
Cutting tool data representation and exchange: Part 1 Overview, fundamental principles and general information model
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17023:2018 ISO 16462 : 2014 Reviewed In : 2023 |
Cubic boron nitride inserts, tipped or solid -- Dimensions, types
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17024 (Part 2):2018 ISO 8688-2 : 1989 Reviewed In : 2023 |
Tool life testing in milling: Part 2 End milling
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17025:2018 ISO 15641 : 2001 Reviewed In : 2023 |
Milling cutters for high speed machining -- Safety requirements
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17026:2018 ISO 22037 : 2007 Reviewed In : 2023 |
Solid end mills with corner radii and cylindrical shanks made of hard cutting materials -- Dimensions
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17027:2018 ISO 16463 : 2014 Reviewed In : 2023 |
Polycrystalline diamond inserts, tipped -- Dimensions, types
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17028:2018 ISO 15917 : 2012 Reviewed In : 2023 |
Solid ball -- Nosed end mills with cylindrical shanks, made of carbide and ceramic materials
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17047 (Part 1):2018 ISO 8688-1 : 1989 Reviewed In : 2023 |
Tool life testing in milling: Part 1 Face milling
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 1715:2002 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Self-holding tapers -- Dimensions (third revision)
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 1850:1961 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Dimensions for shank diameters and driving squares for rotating tools
|
November, 2018
|
1
|
Not Equivalent
|
|
|
IS 18852 (Part 1):2024 ISO 7755-1:2013 |
Hardmetal burrs: Part 1 General specifications
|
-
|
Identical under dual numbering
|
||
|
IS 18852 (Part 2):2024 ISO 7755-2:2013 |
Hardmetal burrs: Part 2 Cylindrical burrs (style A)
|
-
|
Identical under dual numbering
|
||
|
IS 18852 (Part 3):2024 ISO 7755-3:2013 |
Hardmetal burrs: Part 3 Cylindrical round- (ball-) nose burrs (style C)
|
-
|
Identical under dual numbering
|
||
|
IS 18852 (Part 4):2024 ISO 7755-4:2013 |
Hardmetal burrs: Part 4 Spherical burrs (style D)
|
-
|
Identical under dual numbering
|
||
|
IS 18852 (Part 5):2024 ISO 7755-5:2013 |
Hardmetal burrs: Part 5 Oval burrs (style E)
|
-
|
Identical under dual numbering
|
||
|
IS 18852 (Part 6):2024 ISO 7755-6:2013 |
Hardmetal burrs: Part 6 Arch round- (ball-) nose burrs (style F)
|
-
|
Identical under dual numbering
|
||
|
IS 18852 (Part 7):2024 ISO 7755-7:2013 |
Hardmetal burrs: Part 7 Arch pointed-nose burrs (style G)
|
-
|
Identical under dual numbering
|
||
|
IS 18852 (Part 8):2024 ISO 7755-8:2013 |
Hardmetal burrs: Part 8 Flame burrs (style H)
|
-
|
Identical under dual numbering
|
||
|
IS 18852 (Part 9):2024 ISO 7755-9:2013 |
Hardmetal burrs: Part 9 60 degrees and 90 degrees cone burrs (styles J and K)
|
-
|
Identical under dual numbering
|
||
|
IS 18852 (Part 10):2024 ISO 7755-10:2013 |
Hardmetal burrs: Part 10 Conical round- (ball-) nose burrs (style L)
|
-
|
Identical under dual numbering
|
||
|
IS 18852 (Part 11):2024 ISO 7755-11:2013 |
Hardmetal burrs: Part 11 Conical pointed-nose burrs (style M)
|
-
|
Identical under dual numbering
|
||
|
IS 18852 (Part 12):2024 ISO 7755-12:2013 |
Hardmetal burrs: Part 12 Inverted cone burrs (style N)
|
-
|
Identical under dual numbering
|
||
|
IS 1983:2004 ISO 241 Reviewed In : 2021 |
Shank for turning and planing tools -- Shapes and dimensions of the section (second revision)
|
January, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 2340:1972 ISO 297 Reviewed In : 2021 |
Dimensions for self-release 7/24 tapers for milling arbor and tool shanks (first revision)
|
January, 2021
|
2
|
Not Equivalent
|
|
|
IS 2428:2024 ISO 513 : 2012 |
Classification and application of hard cutting materials for metal removal with defined cutting edges - Designation of the main groups and groups of application (third revision)
|
-
|
Identical under dual numbering
|
||
|
IS 2594:2003 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Hacksaw blades -- Specification (second revision)
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 2668:2004 ISO 3337 Reviewed In : 2021 |
T-slot cutters with cylindrical shanks and with morse taper shanks having tapped hole (second revision)
|
January, 2021
|
1
|
Identical under dual numbering
|
|
|
IS 2669:1971 Reviewed In : 2018 |
Specification for woodruff keyslot milling cutters with parallel shank (first revision)
|
November, 2018
|
1
|
Not Equivalent
|
|
|
IS 2670:1991 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Thread milling cutter shell type specification (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 2671:1964 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specification for interlocked milling cutters
|
November, 2018
|
-
|
Indigenous
|
|
|
IS 3019:1973 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for high speed steel butt -- Welded single point turning tools (first revision)
|
August, 2024
|
3
|
Indigenous
|
|
|
IS 3239:1994 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Die stock for circular screwing dies -- Specification (second revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 4022:1996 ISO 883 Reviewed In : 2021 |
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole -- Dimensions (second revision)
|
January, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 4914:1983 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for tap wrenches adjustable (first revision)
|
August, 2024
|
4
|
Indigenous
|
|
|
IS 4921:1968 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for extension bars
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 5030 (Part 1):2017 ISO 4875-1 : 2006 |
Metal cutting band saw blades: Part 1 Vocabulary (second revision)
|
-
|
Identical under dual numbering
|
||
|
IS 5030 (Part 2):2016 ISO 4875-2 : 2006 Reviewed In : 2021 |
Metal cutting band saw blades: Part 2 Characteristics and dimensions (second revision)
|
January, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 5031:1992 ISO 2296-1972 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Saws -- Metal slitting -- Specification (second revision)
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 5100:1969 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills, parallel shanks, stub series for right hand cutting
|
August, 2024
|
2
|
Not Equivalent
|
|
|
IS 5101:1991 Reviewed In : 2018 |
Twist drills, parallel shank, jobber series -- Specification (first revision)
|
November, 2018
|
-
|
Not Equivalent
|
|
|
IS 5102:1969 ISO 494 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills, parallel shank, long series
|
September, 2024
|
5
|
Not Equivalent
|
|
|
IS 5103:1969 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills, morse taper shanks
|
August, 2024
|
3
|
Not Equivalent
|
|
|
IS 5104:1969 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills, oversize morse taper shank
|
August, 2024
|
4
|
Not Equivalent
|
|
|
IS 5105:1969 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills, taper square shanks for ratchet braces
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 5106:1969 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills, taper square shanks for carpenters braces
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 5360:1969 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Dimensions for driving tenons
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 5362:1969 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills, parallel shanks, stub series, left hand cutting tor automatics
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 5363:2017 |
Micro-drills -- Specification (second revision)
|
-
|
Indigenous
|
||
|
IS 5364:1969 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills for taper pin holes with taper 1 : 50
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 5365:1991 ISO 7089 Reviewed In : 2018 |
Core drills, parallel shanks -- Specification (second revision )
|
November, 2018
|
-
|
Not Equivalent
|
|
|
IS 5366:1978 ISO 7079 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for core drills, morse taper shanks (first revision)
|
August, 2024
|
2
|
Not Equivalent
|
|
|
IS 5444:1978 ISO 236-1 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specification for parallel hand reamers with parallel shanks (first revision)
|
November, 2018
|
2
|
Not Equivalent
|
|
|
IS 5445:1978 ISO 236-1 Reviewed In : 2018 |
Specification for long fluted machine reamers with morse taper shanks (first revision)
|
November, 2018
|
2
|
Not Equivalent
|
|
|
IS 5446:2017 |
Machine chucking reamers with parallel shanks -- Specification (second revision)
|
-
|
Not Equivalent
|
||
|
IS 5447:2017 |
Machine chucking reamers with morse taper shank -- Specification (second revision)
|
-
|
Not Equivalent
|
||
|
IS 5568:1978 ISO 2402 Reviewed In : 2023 |
Dimensions for tenons and cross -- Slots with taper bore 1 : 30 (first revision)
|
June, 2023
|
1
|
Not Equivalent
|
|
|
IS/ISO 5604-4:2012 ISO 5609-4: 2012 Reviewed In : 2021 |
Tool holders for internal turning with cylindrical shank for indexable inserts: Part 4 Style L
|
July, 2021
|
-
|
Identical under single numbering
|
|
|
IS/ISO 5609-1:2012 ISO 5609-1 : 2012 |
Tool holders for internal turning with cylindrical shank for indexable inserts: Part 1 Designation, styles, dimensions and calculation for corrections
|
-
|
Identical under single numbering
|
||
|
IS/ISO 5609-2:2012 ISO 5609-2: 2012 Reviewed In : 2021 |
Tool holders for internal turning with cylindrical shank for indexable inserts: Part 2 Style F
|
July, 2021
|
-
|
Identical under single numbering
|
|
|
IS/ISO 5609-3:2012 ISO 5609-3: 2012 Reviewed In : 2022 |
Tool holders for internal turning with cylindrical shank for indexable inserts: Part 3 Style K
|
March, 2022
|
-
|
Identical under single numbering
|
|
|
IS/ISO 5609-5:2012 ISO 5609-5: 2012 Reviewed In : 2021 |
Tool holders for internal turning with cylindrical shank for indexable inserts: Part 5 Style U
|
July, 2021
|
-
|
Identical under single numbering
|
|
|
IS/ISO 5609-6:2012 ISO 5609-6: 2012 Reviewed In : 2021 |
Tool holders for internal turning with cylindrical shank for indexable inserts: Part 6 Style Q
|
July, 2021
|
-
|
Identical under single numbering
|
|
|
IS 5693:1988 ISO 4205 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for countersinks 90°, with parallel shanks and solid pilots (first revision)
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 5698:1970 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for rotary form - relieved gear cutters for spur and helical gears
|
August, 2024
|
3
|
Indigenous
|
|
|
IS 5702:1970 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for flat thread rolling dies
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 5703:1988 ISO 4204 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for countersinks 90° with morse taper shanks and detachable pilots (first revision)
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 5704:1988 ISO 4206 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for counterbores with parallel shanks and solid pilots (first revision)
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 5705:1988 ISO 4209 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for detachable pilots for use with counterbores and countersink 90 degree (first revision)
|
August, 2024
|
2
|
Indigenous
|
|
|
IS 5710:1988 ISO 4207 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for counterbores with morse taper shanks and detachable pilots (first revision)
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 5881:1984 ISO 3465 Reviewed In : 2021 |
Specification for taper pin hand reamers (first revision)
|
January, 2021
|
1
|
Not Equivalent
|
|
|
IS 5882:1970 Reviewed In : 2018 |
Specification for socket reamers with parallel shanks
|
November, 2018
|
2
|
Not Equivalent
|
|
|
IS 5907:1970 Reviewed In : 2018 |
Specification for socket reamers with morse taper shanks
|
November, 2018
|
3
|
Not Equivalent
|
|
|
IS 5918:1984 ISO 3467 Reviewed In : 2021 |
Specification for taper pin, machine reamers with morse taper shanks (first revision)
|
January, 2021
|
2
|
Not Equivalent
|
|
|
IS 5919:2018 2238 : 2011 |
Machine bridge reamers (second revision)
|
-
|
Identical under dual numbering
|
||
|
IS 5926:1970 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specification for shell reamers
|
November, 2018
|
2
|
Not Equivalent
|
|
|
IS 5927:1981 ISO 4202 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for reduction sleeves 7/24 tapers to morse tapers (first revision)
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 5936:1981 ISO 2402 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specification for arbors with morse taper shanks for shell tools (first revision)
|
November, 2018
|
-
|
Not Equivalent
|
|
|
IS 5989:1998 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Hole mills -- Specification (second revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 6173 (Part 1):1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps -- Dimensions and tolerances on threaded portion: Part 1 For ISO metric screw threads (first revision)
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 6173 (Part 2):1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps -- Dimensions and tolerances of threaded portion: Part 2 For pipe screw threads G, Rp and Rc series
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 6175 (Part 1):1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps: Part 1 Hand and short machine screwing taps for ISO metric screw threads sizes ml to m2.5 -- Specification (second revision)
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 6175 (Part 2):1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps: Part 2 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m10 -- Specification (second revision)
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 6175 (Part 3):1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps: Part 3 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches and m3 to m100 with fine pitches -- Specification (second revision)
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 6175 (Part 4):1991 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps: Part 4 Long shank machine screwing taps for ISO metric screw threads sizes from m3 to m24 -- Specification
|
August, 2024
|
2
|
Not Equivalent
|
|
|
IS 6175 (Part 5):1991 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps: Part 5 Nut screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches -- Specification
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 6175 (Part 6):1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps: Part 6 Screwing taps for pipe threads parallel g series -- Specification
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 6175 (Part 7):1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps: Part 7 Screwing taps for pipe threads parallel rc series -- Specification
|
September, 2024
|
1
|
Not Equivalent
|
|
|
IS 6175 (Part 8):1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps: Part 8 Screwing taps for pipe threads taper rc series -- Specification
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 6255:2013 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Inverse dovetail cutters and dovetail cutters with cylindrical shanks (third revision)
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 6256:1995 Reviewed In : 2021 |
Shell end single angle milling cutters -- Specification (first revision)
|
January, 2021
|
-
|
Indigenous
|
|
|
IS 6257:1982 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for shell end mills (first revision)
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 6285:1971 Reviewed In : 2018 |
Dimensions for interchangeability of milling cutters and milling arbors with key drive
|
November, 2018
|
1
|
Not Equivalent
|
|
|
IS 6308:1982 ISO 2587-1972 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for side and face milling cutters (first revision)
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 6309:1982 ISO 2584-1972 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for cylindrical milling cutters (first revision)
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 6310:1971 Reviewed In : 2018 |
Dimensions for interchangeability of milling cutters and milling arbors with tenon drive
|
November, 2018
|
1
|
Not Equivalent
|
|
|
IS 6314:1982 ISO 3860 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for single corner rounding milling cutters (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 6322:1982 ISO 3860 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for concave milling cutters (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 6323:1982 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for convex milling cutters (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 6324:1971 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for single angle milling cutters
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 6325:1971 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for double angle milling cutters
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 6326:1996 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Equal angle milling cutters -- Specification (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 6352:2014 Reviewed In : 2019 |
Slot drills with parallel shank -- Specification (second revision)
|
December, 2019
|
-
|
Not Equivalent
|
|
|
IS 6353:2014 Reviewed In : 2019 |
End mills with parallel shank -- Specification (second revision)
|
December, 2019
|
-
|
Not Equivalent
|
|
|
IS 6354:2017 |
End mills with morse taper shank -- Specification (second revision)
|
-
|
Not Equivalent
|
||
|
IS 6355:1982 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for keyway milling cutters (first revision)
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 6388:2017 |
Slot drills with morse taper shank -- Specification (second revision)
|
-
|
Not Equivalent
|
||
|
IS/ISO 6462:2011 ISO 6462 : 2011 Reviewed In : 2019 |
Face milling cutters with indexable inserts -- Dimensions
|
December, 2019
|
-
|
Identical under single numbering
|
|
|
IS 6550:1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Thread milling cutter with parallel shank -- Specification (first revision)
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 6551:1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Thread milling cutters with morse taper shanks -- Specification (first revision)
|
August, 2024
|
3
|
Indigenous
|
|
|
IS 6681:1972 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Dimensions for self-release 7/24 tapers for spindle noses for milling machines
|
November, 2018
|
2
|
Indigenous
|
|
|
IS 6682:1991 ISO 238 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Morse taper extension sockets -- Specification (first revision)
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 6702:1991 ISO 238 Reviewed In : 2018 |
Morse taper reduction sleeves specification (first revision)
|
November, 2018
|
2
|
Not Equivalent
|
|
|
IS 6708:1977 ISO 866 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for centre drills type A (first revision)
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 6709:1977 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for center drills type B (first revision)
|
August, 2024
|
-
|
Not Equivalent
|
|
|
IS 6710:1977 ISO 2541 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for centre drills type R (first revision)
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 6776:1980 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for knurling wheels (first revision)
|
August, 2024
|
1
|
Indigenous
|
|
|
IS/ISO 7388-1:2007 ISO 7388-1 : 2007 Reviewed In : 2023 |
Tool Shanks with 7/24 taper for automatic tool changers: Part 1 Dimensions and designation of shanks of forms A,AD,AF,U,UD and UF
|
June, 2023
|
-
|
Identical under single numbering
|
|
|
IS/ISO 7388-2:2007 ISO 7388-2 : 2007 Reviewed In : 2023 |
Tool shanks with 7/24 taper for automatic tool changers: Part 2 Dimensions and designation of shanks of forms J, JD and JF
|
June, 2023
|
-
|
Identical under single numbering
|
|
|
IS/ISO 7388-3:2007 ISO 7388-3 : 2007 Reviewed In : 2018 |
Tool shanks with 7/24 taper for automatic tool changers: Part 3 Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
|
November, 2018
|
-
|
Identical under single numbering
|
|
|
IS 7766:1975 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills for jig boring machines
|
August, 2024
|
2
|
Indigenous
|
|
|
IS 7772:1975 ISO 3314 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for shell core drills
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 7773:1975 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Holding dimensions for broaching tools
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 7778 (Part 1):2003 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools sampling inspection procedures: Part 1 Twist drills, countersink and counterbores (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 7778 (Part 2):2003 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools sampling inspection procedures: Part 2 Reamers (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 7778 (Part 3):2003 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools sampling inspection procedures: Part 3 Sleeves, sockets and adaptors (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 7778 (Part 4):2003 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools sampling inspection procedures: Part 4 Screwing taps, dies and knurling tools (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 7778 (Part 5):2003 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools sampling inspection procedures: Part 5 Milling cutters (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 7778 (Part 6):2003 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools sampling inspection procedures: Part 6 Milling arbors and accessories (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 7778 (Part 7):2003 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools sampling inspection procedures: Part 7 Gear cutting tools and broaches (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 7778 (Part 8):2003 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools sampling inspection procedures: Part 8 Saws (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 7778 (Part 9):2003 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools sampling inspection procedures: Part 9 Single point (HSS And Carbide Tipped) tools (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 7778 (Part 10):2003 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools sampling inspection procedures: Part 10 Carbide tips and indexable inserts (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 7778 (Part 11):2003 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools sampling inspection procedures: Part 11 Hard metal burrs (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 7822:2024 ISO 3291:2016 |
Extra-long Morse taper shank twist drills (third revision)
|
-
|
Identical under dual numbering
|
||
|
IS 7823:2024 ISO 3292:2016 |
Extra-long parallel shank twist drills (third revision)
|
-
|
Identical under dual numbering
|
||
|
IS 8305:1976 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills, morse taper shank, long series
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 8306:1976 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for carbide tipped twist drills, morse taper shank
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 8307:1976 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for carbide tipped, twist drills, parallel shank
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 8405:2005 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Thread rolling cylindrical dies -- Specification (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 8614 (Part 1):2013 ISO 839-1 : 2006 Reviewed In : 2023 |
Milling machine arbors with 7/24 tapers: Part 1 Dimensions and designation (second revision)
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 8615:1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Stub milling arbors with self-release 7/24 taper -- Specification (first revision)
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 8616:1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Stub milling arbors with self-release 7/24 taper and with key -- Specification (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 8618:1977 ISO 8319-2 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for spacing collars for milling arbors
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 8619:1977 ISO 839-2 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for bearing collars for milling arbors
|
August, 2024
|
1
|
Not Equivalent
|
|
|
IS 8620:1993 Reviewed In : 2023 |
Clamping nuts for milling arbors specification (first revision)
|
June, 2023
|
-
|
Not Equivalent
|
|
|
IS 8621:1977 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for retaining screw for milling arbors
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 8692 (Part 1):2004 ISO 3338 Reviewed In : 2021 |
Cylindrical shanks for milling cutters: Part 1 Dimensional characteristics of plain cylindrical shanks (first revision)
|
January, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 8692 (Part 2):2024 ISO 3338-2 : 2013 |
Cylindrical shanks for milling cutters: Part 2 Dimensional characteristics of flatted cylindrical shanks (third revision)
|
-
|
Identical under dual numbering
|
||
|
IS 8692 (Part 3):2007 ISO 3338-2 Reviewed In : 2023 |
Cylindrical shanks for milling cutters: Part 3 Dimensional characteristics of threaded shanks
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 8732:2003 ISO 2490 Reviewed In : 2018 |
Single -- Start solid (Monobloc) gear nobs with tenon drive or axial keyway, 1 to 40 module -- Nominal dimensions (first revision)
|
November, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 8842:1978 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for high speed steel butt - Welded single point planing tools
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 8918:1978 ISO 2905 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Dimensions for spindle noses for adjustable adaptors
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 8919:2007 Reviewed In : 2017 |
Modular units for machine tool construction -- Spindle noses and adjustable adaptors for multi spindle heads (first revision)
|
September, 2017
|
-
|
Identical under dual numbering
|
|
|
IS 9323:1991 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped end mills with parallel shanks -- specification (first revision)
|
August, 2024
|
1
|
Indigenous
|
|
|
IS 9324:1991 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped end mlls with morse taper shanks -- Specification (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 9325:1996 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped slot drills with parallel shanks -- Specification (first Revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 9326:1996 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped slot drills with morse taper and tapped end shanks -- Specification (first revision)
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 9771:1981 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for carbide tipped core drills with morse taper shanks
|
August, 2024
|
-
|
Indigenous
|
|
|
IS 9775:2000 Reviewed In : 2021 |
Carbide flats, squares and rounds -- Dimensions (first revision)
|
January, 2021
|
-
|
Indigenous
|
|
|
IS 9897:2013 ISO 1832 :2004 Reviewed In : 2018 |
Indexable inserts for cutting tools -- Designation (third revision)
|
November, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 9897:2024 ISO 1832:2017 |
Indexable inserts for cutting tools - Designation (fourth revision)
|
-
|
Identical under dual numbering
|
| No Records Found |
| No Records Found |
| No Records Found |
|
PGD 32 (27808)
Revision of: IS/ISO 6462:2011 |
Face and shoulder milling cutters with indexable inserts -- Dimensions |
PGD 32 (23095)
Revision of: IS/ISO 7388:2007 |
Tool shanks with 7 by 24 taper for automatic tool changers Part 3 Retention knobs of forms AD AF UD UF JD and JF first revision |
|
PGD 32 (23217)
Revision of: IS 11523:1998 |
Indexable hardmetal carbide inserts with wiper edges without fixing hole -- Dimensions second revision | |
|
PGD 32 (23663)
Revision of: IS 12354:2002 |
Indexable hard material inserts with rounded corners with partly cylindrical fixing hole -- Dimensions second revision |
|
|
IS 10923:1994 Reviewed In : 2021 |
Carbide tipped and solid carbide reamers - Technical supply conditions First Revision |
|
|
IS 10969:1984 |
Single Point Carbide Tipped Internal Threading Tools |
|
|
IS 11120:1984 |
Carbid Tipped Single Point Boring Tools Arbour Mounted Type IND 4 |
|
|
IS 11172 (Part 2):1985 Reviewed In : 2021 |
Recommendations for tool shanks for numerically controlled machine tools Tool Stationary Type Part 2 prismatic shank |
|
|
IS 11173 (Part 1):1985 ISO 7388-1 Reviewed In : 2011 |
Recommendations for Tool Shanks 7 24 Taper for Numerically Controlled Machine Tools with Automatic Tool Changers tool rotating type - Part 1 Tool Shanks |
|
|
IS 11173 (Part 2):1985 ISO 7388-2 Reviewed In : 2011 |
Recommendations for tool shanks 7 24 taper for numerically controlled machine tools with automatic tool changers tool rotating type Part 2 Retention knobs |
|
|
IS 11440:1985 |
Reduction Sleeves 7 24 Taper to Cylindrical |
|
|
IS 11835:1986 ISO 5414-1 Reviewed In : 2016 |
Dimensions of driving system of tool chucks End mill holders with clamp screws for flatted parallel shank tools |
|
|
IS 11836:1986 |
Single Point Carbide Tipped Straight Round Nose Truning Tool |
|
|
IS 11837:1986 |
Single Point Carbide Tipped Craked Round Nose Truning Tool |
|
|
IS 11878 (Part 1):1986 |
Single Point Carbide Tipped Tool Blanks for Slinding Head Type Automats - Part 1 Truning Tool IND 5 |
|
|
IS 11878 (Part 2):1986 |
Single Point Carbide Tipped Tool Blanks for Slinding Head Type Automats - Part 2 Parting off Tool IND 6 |
|
|
IS 11878 (Part 3):1986 |
Single Point Carbide Tipped Tool Blanks for Slinding Head Type Automats - Part 3 Recessing Tool IND 9 |
|
|
IS 11943 (Part 1):1987 Reviewed In : 2018 |
Specification for hard metal burrs Part 1 technical supply conditions |
|
|
IS 11943 (Part 2):1987 Reviewed In : 2018 |
Specification for hard metal burrs Part 2 Cylindrical burrs Type A |
|
|
IS 11943 (Part 3):1987 Reviewed In : 2018 |
Specification for hard metal burrs Part 3 Cylindrical round -- Ball - nose burrs Type C |
|
|
IS 11943 (Part 4):1987 Reviewed In : 2018 |
Specification for hard metal burrs Part 4 Spherical burrs Type D |
|
|
IS 11943 (Part 5):1987 Reviewed In : 2018 |
Specification for hard metal burrs Part 5 Oval burrs Type E |
|
|
IS 11943 (Part 6):1987 Reviewed In : 2018 |
Specification for hard metal burrs Part 6 Arch round - Ball - nose burrs Type F |
|
|
IS 11943 (Part 7):1987 Reviewed In : 2018 |
Specification for hard metal burrs Part 7 Arch pointed nose burrs Type G |
|
|
IS 11943 (Part 8):1987 Reviewed In : 2018 |
Specification for hard metal burrs Part 8 Flame burrs Type H |
|
|
IS 11943 (Part 9):1987 Reviewed In : 2018 |
Specification for hard metal burrs Part 9 60 and 90 cone burrs Type J and K |
|
|
IS 11943 (Part 10):1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for hard metal burrs Part 10 Conical round -- Bal -l nose burrs Type L |
|
|
IS 11943 (Part 11):1987 Reviewed In : 2024 |
Specification for hard metal burrs Part 11 Conical pointed -- Nose burrs Type M |
|
|
IS 11943 (Part 12):1987 Reviewed In : 2018 |
Specification for hard metal burrs Part 12 Inverted cone burrs Type N |
|
|
IS 12294:1988 |
Carbide Tips for Parting off Turning Tools IND 5 IND 6 for Sliding Head Typeautomats |
|
|
IS 12320:1988 Reviewed In : 2018 |
Technical supply conditions for circular screwing dies |
|
|
IS 12328 (Part 1):1988 Reviewed In : 1998 |
Bevel gear systems Part 1 Straight bevel gears |
|
|
IS 12328 (Part 2):1988 Reviewed In : 1998 |
Bevel gears systems Part 2 Spiral bevel gears |
|
|
IS 12328 (Part 3):1988 Reviewed In : 1998 |
Bevel gears systems Part 3 Zerol bevel gears |
|
|
IS 12691:1989 Reviewed In : 2013 |
Small Tools - Subland Twist Drills with cylindrical Shanks for Holes Prior to Tapping Screw Threads First Revision |
|
|
IS 13167:1991 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Side and face milling cutters with indexable inserts -- Specification |
|
|
IS 13740:1993 Reviewed In : 2018 |
Carbide Tipped Single Point Tools - Technical Supply Conditions |
|
|
IS 14584:1998 Reviewed In : 2018 |
Spline and serration hobs - Technical supply conditions |
|
|
IS 14617 (Part 2):1998 ISO 6987-2 |
Indexable inserts for cutting tools - Hardmetal carbide inserts with rounded corners with partly cylinderical fixing hole Part 2 Dimensions of inserts with 11 degree normal clearance |
|
|
IS 14864:2000 ISO 6261 Reviewed In : 2011 |
Boring Bars Tool Holders with Cylindrical Shank for Indexable Inserts - Designation |
|
|
IS 14865:2001 ISO 5609 : 1998 Reviewed In : 2021 |
Boring bars for indexable inserts -- Dimensions |
|
|
IS 14866:2000 ISO 5610 Reviewed In : 2016 |
Single Point Tool Holders for Turning and Copying for Indexable Inserts - Dimensions |
|
|
IS 1830:1982 ISO 3855 Reviewed In : 2018 |
Technical supply conditions for milling cutters Second Revision |
|
|
IS 1831:1961 |
Dimensions for Milling Cutters |
|
|
IS 1836:1961 |
Reamers |
|
|
IS 2162:1979 |
Dimensions for Carbide Tips for Single Point Turning Tools |
|
|
IS 2163:1976 |
Carbide Tipped Single Point Turning Tools |
|
|
IS 2169:1963 |
Milling Arbors |
|
|
IS 2170:1963 |
Accessories for Milling Arbors |
|
|
IS 2513:1963 |
Boundary Dimensions For Rolling Bearings For General Engineering Purposes |
|
|
IS 2608:1964 |
Reduction Sleeves and Extension Sockets for Morse Tapers |
|
|
IS 3697:1966 |
Boundary dimensions for taper roller bearings |
|
|
IS 4829:1983 |
Plastic Slide Fasteners |
|
|
IS 4917:1968 |
Tap Wrenches |
|
|
IS 4974:1968 |
Grease nipple small |
|
|
IS 5030 (Part 3):2005 Reviewed In : 2021 |
Metal cutting bandsaw blade -- Specification Part 3 Dimensions and other requirements second revision |
|
|
IS 5099:2003 Reviewed In : 2018 |
Technical supply conditions for twist drills Second Revision |
|
|
IS 5443:1994 Reviewed In : 2021 |
High speed steel reamers - Technical supply conditions Second Revision |
|
|
IS 5618:1970 Reviewed In : 1998 |
Circular Thread Cutting Dies for Conduit Threads |
|
|
IS 599:1960 |
Twist Drills |
|
|
IS 6075:1971 |
Carbide Tipped Single Point Planning Tools |
|
|
IS 6091:1971 |
Machine Jig Reamers |
|
|
IS 6171:1992 5967-1981 Reviewed In : 2018 |
Screwing taps - Technical supply conditions Second Revision |
|
|
IS 664:1963 |
Centre Drills |
|
|
IS/ISO 7406:1986 |
Bore Type Milling Cutters for Indexable Inserts - Designation |
|
|
IS 7778:1983 |
Methods for Sampling Small Tools |
|
|
IS/ISO 7848:1986 |
Shank Type Milling Cutters for Indexable Inserts - Designation |
|
|
IS 8065:1976 |
Dimensions for Carbid Tips for Light Cutting Operations |
|
|
IS 8301:1977 |
Dimensions for Carbide Tips for Drills with Point Angle 11 5 Type AB |
|
|
IS 8611:1988 Reviewed In : 2018 |
Technical supply conditions for milling arbors and accessories First Revision |
|
|
IS 8612:1977 |
Milling Arbors with Morse Taper and Positive Drive |
|
|
IS 8613:1977 |
Stub Milling Arbors with Morse Taper and Positive Drive |
|
|
IS 8614:1993 Reviewed In : 2013 |
Milling Arbors with Self-release 7 24 Taper |
|
|
IS 8617:1977 |
Stub Milling Arbors with Morse Taper and with Key |
|
|
IS 8692:1978 |
Dimensions for parallel shanks for milling cutters |
|
|
IS 8731:1978 Reviewed In : 2018 |
Technical supply conditions for general purpose gear hods |
|
|
IS 8778:1978 |
Single Point Carbide Tipped External Threading Tools IND 2 55 or 60 |
|
|
IS 8919 (Part 1):1978 ISO 2905 Reviewed In : 2008 |
Adjustable Adaptors for Tools With Self-Holding Taper Shanks - Part I Short Adaptors |
|
|
IS 8919 (Part 2):1978 ISO 2905 Reviewed In : 2008 |
Adjustable Adaptors for Tools with Self-holding Taper Shanks - Part II Long Adaptors |
|
|
IS 8919 (Part 3):1978 ISO 2905 Reviewed In : 2008 |
Adjustable Adaptors for Tools with Self-holding Taper Shanks - Part III Extra Long Adaptors |
|
|
IS 8919 (Part 4):1978 ISO 2905 Reviewed In : 2008 |
Adjustable Adaptors for Tools with Self-holding Taper Shanks - Part IV Claming nuts |
|
|
IS 9247:1979 |
Tolerances for radial rolling bearings with shields or seals |
|
|
IS 9322:1980 Reviewed In : 2018 |
Technical supply conditions for carbide tipped milling cutters |
|
|
IS 9327:1979 Reviewed In : 2005 |
Dimensions for Carbide Tips for Reamers Core Drills End Mill and Slots Milling Cutters |
|
IS 10140:1982 ISO 3295 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for bandsaw blades for woodworking |
|
|
IS 10255:1982 ISO 3940 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for tapered die-sinking cutters with parallel shanks |
|
|
IS 10465:1983 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for chain wheel rotary tooth form milling cutter |
|
|
IS 10514:1983 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for split taper socket for tools with parallel shank and driving tenon |
|
|
IS 10571:1983 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for split taper sockets for tools with parallel shank driving square and driving tenon |
|
|
IS 10591:1983 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for segmental saws for cold sawing |
|
|
IS 10608:1998 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Spline hobs -- Straight sided specification first revision |
|
|
IS 10851:1984 ISO 3465 Reviewed In : 2021 |
Specification for taper pin machine reamers with parallel shanks |
|
|
IS 10884:1984 Reviewed In : 2022 |
Specification for carbide tipped chucking reamers with parallel shanks |
|
|
IS 10885:1984 Reviewed In : 2021 |
Specification for carbide tipped chucking reamers with morse taper shanks with short cutting edge |
|
|
IS 11002:1984 Reviewed In : 2021 |
Specification for machine jig reamers morse taper shank |
|
|
IS 11127:1984 Reviewed In : 2021 |
Specification for holders for knurling wheels |
|
|
IS 11143:1984 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for ground high speed steel tool bits |
|
|
IS 11522 (Part 5):2017 ISO 3002-5 : 1989 |
Basic quantities in cutting and grinding Part 5 Basic terminology for grinding processes using grinding wheels |
|
|
IS 11741:1986 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for circular saws for wood working |
|
|
IS 11829:1986 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for miniature hand hacksaw blades |
|
|
IS 11934:1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for carbide tipped shell reamers |
|
|
IS 11935:1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for carbide tipped chucking reamers with morse taper shank with long cutting edge |
|
|
IS 11936:1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for carbide tipped long fluted machine reamer with morse taper shank |
|
|
IS 11937:1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for carbide tipped machine jig reamer with morse taper shank |
|
|
IS 11938:1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for tool adaptors for numerically controlled machine tools Tool rotating type |
|
|
IS 11949:1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for turret sockets |
|
|
IS 11950:1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for tool adaptors for numerically controlled machine tools Tool stationary type |
|
|
IS 12321:1988 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for circular screwing dies for ISO metric threads |
|
|
IS 12322:1988 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for circular screwing dies for taper pipe threads R - Series |
|
|
IS 12323:1988 Reviewed In : 2021 |
Specification for circular screwing dies for parallel pipe threads G series |
|
|
IS 12324:1988 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for hexagonal die nuts |
|
|
IS 12325:1988 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for circular screwing dies for ISO metric conduit pipe threads |
|
|
IS 12536:1989 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools -- Disc type gear shaper cutters -- Specification |
|
|
IS 12537:1989 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools -- Shank type gear shaper cutter -- Specification |
|
|
IS 12538:1989 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools -- Shank type gear shaper cutter -- Specification |
|
|
IS 12687:1989 Reviewed In : 2023 |
Small tools -- Subland twist drills with morse taper shank for holes prior to tapping screw threads -- Specification |
|
|
IS 12688:1989 ISO 3439 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools -- Subland twist drills with parallel morse taper shank for clearance holes and countersinks head screws -- Specification |
|
|
IS 12689:1989 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools -- Subland twist drills with morse taper shank for clearance holes and counterbores for slotted cheese head screws -- Specification |
|
|
IS 12690:1989 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small Tools -- Subland twist drills with morse taper shank for clearance holes and counterbores for slotted cheese head screws -- Specification |
|
|
IS 12691:2013 ISO3439:2003 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Subland Twist Drills with Cyliindrical Shanks for Holes Prior to Tapping Screw Threads |
|
|
IS 12692:1989 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Small tools -- Subland twist drills with parallel shanks for clearance holes and countersinks for countersunk head screws -- Specification |
|
|
IS 12716:2002 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
End mills with indexable specification first revision |
|
|
IS 12728:1989 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tips for dead centres -- Specification |
|
|
IS 13244:1991 Reviewed In : 2021 |
Half side and face cutters with indexable inserts -- Specification |
|
|
IS 13303:1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Countersinks 60-degree 90-degree and 120-degree with morse taper shank -- Specification |
|
|
IS 13304:1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Countersinks 60 90 and 120 with parallel shank -- Specification |
|
|
IS 13741 (Part 1):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tips Part 1 Carbide tips for single point tools -- Specification |
|
|
IS 13741 (Part 2):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tips Part 2 Carbide tips for single point tools for light cutting operations -- Specification |
|
|
IS 13741 (Part 3):1993 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Carbide tips Part 3 Carbide tips for single point tool blanks for sliding head type automats -- Specification |
|
|
IS 13741 (Part 4):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tips Part 4 Carbide tips for multi point tools -- Specification |
|
|
IS 13741 (Part 5):1993 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Carbide tips Part 5 Carbide tips for twist drills with point angle 115 degree C -- Specification |
|
|
IS 13741 (Part 6):1993 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Carbide tips Part 6 Carbide tips for single point threading tools -- Specification |
|
|
IS 13741 (Part 7):1993 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Carbide tips Part 7 Carbide tips for single point round nose turning tools -- Speciification |
|
|
IS 13742 (Part 1):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped single point tools ISO series Part 1 Straight turning tool ISO 1 -- Specification |
|
|
IS 13742 (Part 2):1993 Reviewed In : 2019 |
Carbide tipped single point tools -- ISO series Part 2 Cranked turning and facing tool ISO 2 -- Specification |
|
|
IS 13742 (Part 3):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped single point tools -- ISO series Part 3 Cranked finishing tool ISO 3 -- Specification |
|
|
IS 13742 (Part 4):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped single point tools -- ISO series Part 4 Broad turning tool ISO 4 -- Specification |
|
|
IS 13742 (Part 5):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tips Part 5 Carbide tips twist drills with point angle 115 degree -- Specification |
|
|
IS 13742 (Part 6):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped single point tool ISO series Part 6 Cranked turning tool ISO 6 -- Specification |
|
|
IS 13742 (Part 7):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped single point tools ISO series Part 7 Parting off tool ISO 7 -- Specification |
|
|
IS 13742 (Part 8):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped single point tools -- ISO series Part 8 boring tool ISO 8 -- Specification |
|
|
IS 13742 (Part 9):1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped single point tools -- ISO series Part 9 Boring and facing tool ISO 9 -- Specification |
|
|
IS 13743 (Part 110):1997 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped single point tools -- Ind series -- Specification |
|
|
IS 13744 (Part 18):1995 Reviewed In : 2021 |
Carbide tipped single point planing tools -- specification |
|
|
IS 13776:1993 ISO 1080 Reviewed In : 2023 |
Machine tools morse taper shanks -- Cotter slots taper keys |
|
|
IS 14168:2017 ISO 6986 : 2013 |
Side and face milling Slotting cutters with indexable inserts -- Dimensions first revision |
|
|
IS 14585:1998 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Spline hobs -- Involute sided -- Specification |
|
|
IS 14586:1998 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Serration hobs -- Straight sided -- Specification |
|
|
IS 14863:2018 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Turning and copying tool holders and cartridges for indexable inserts -- Designation first revision |
|
|
IS 14867 (Part 2):2019 ISO 5611-2 : 2015 Reviewed In : 2023 |
Cartridges type A for indexable inserts Part 2 Style F |
|
|
IS 14867 (Part 3):2019 ISO 5611-3 : 2015 Reviewed In : 2023 |
Cartridges type A for indexable inserts Part 3 Style G |
|
|
IS 14867 (Part 4):2019 ISO 5611-4 : 2015 Reviewed In : 2023 |
Cartridges type A for indexable inserts Part 4 Style J |
|
|
IS 14867 (Part 5):2019 ISO 5611-5 : 2015 Reviewed In : 2023 |
Cartridges type A for indexable inserts Part 5 Style K |
|
|
IS 14867 (Part 6):2019 ISO 5611-6 : 2015 Reviewed In : 2023 |
Cartridges type A for indexable inserts Part 6 Style l |
|
|
IS 14867 (Part 7):2019 ISO 5611-7 : 2015 Reviewed In : 2023 |
Cartridges type A for indexable inserts Part 7 Style R |
|
|
IS 14867 (Part 8):2019 ISO 5611-8 : 2015 Reviewed In : 2023 |
Cartridges type A for indexable inserts Part 8 Style S |
|
|
IS 14867 (Part 10):2019 ISO 5611-10 : 2015 Reviewed In : 2023 |
Cartridges type A for indexable inserts Part 10 Style U |
|
|
IS 14867 (Part 11):2019 ISO 5611-11 : 2015 Reviewed In : 2023 |
Cartridges type A for indexable inserts Part 11 Style W |
|
|
IS 14867 (Part 12):2019 ISO 5611-2 : 2015 Reviewed In : 2023 |
Cartridges type A for indexable inserts Part 12 Style Y |
|
|
IS 16059:2013 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Solid carbide parallel shank twist drills jobber series -- Specification |
|
|
IS 16060:2013 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Solid carbide parallel shank twist drills stub series -- Specification |
|
|
IS 16136:2013 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Solid carbide end mills with continuous parallel shank -- Specification |
|
|
IS 16176:2014 Reviewed In : 2019 |
Ratchet pipe threader for taper pipe threads R - Series -- Specification |
|
|
IS 16435:2017 |
Solid carbide end mills with stepped parallel shank -- Specification |
|
|
IS 16637 (Part 2):2018 ISO 5610-2 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts Part 2 Style A |
|
|
IS 16637 (Part 4):2018 ISO 5610-4 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts Part 4 Style D |
|
|
IS 16637 (Part 5):2018 ISO 5610-5 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts Part 5 Style F |
|
|
IS 16637 (Part 6):2018 ISO 5610-6 : 2010 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts Part 6 Style G |
|
|
IS 16637 (Part 7):2018 ISO 5610-7 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts Part 7 Style J |
|
|
IS 16637 (Part 8):2018 ISO 5610-8 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts Part 8 Style K |
|
|
IS 16637 (Part 9):2018 ISO 5610-9 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts Part 9 Style l |
|
|
IS 16637 (Part 10):2018 ISO 5610-10 : 2014 Reviewed In : 2023 |
Tool Holders with rectangular shank for Indexable Inserts Part 10 Style N |
|
|
IS 16637 (Part 11):2018 ISO 5610-11 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts Part 11 Style R |
|
|
IS 16637 (Part 12):2018 ISO 5610-12 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts Part 12 Style S |
|
|
IS 16637 (Part 13):2018 ISO 5610 -13 : 2014 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Tool holders with rectangular shank for indexable inserts Part 13 Style T |
|
|
IS 16637 (Part 14):2018 ISO 5610 -14 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts Part 14 Style H |
|
|
IS 16637 (Part 15):2018 ISO 5610-15 : 2014 Reviewed In : 2023 |
Tool holders with rectangular shank for indexable inserts Part 15 Style V |
|
|
IS 17023:2018 ISO 16462 : 2014 Reviewed In : 2023 |
Cubic boron nitride inserts tipped or solid -- Dimensions types |
|
|
IS 2594:2003 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Hacksaw blades -- Specification second revision |
|
|
IS 2669:1971 Reviewed In : 2018 |
Specification for woodruff keyslot milling cutters with parallel shank first revision |
|
|
IS 2670:1991 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Thread milling cutter shell type specification first revision |
|
|
IS 2671:1964 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specification for interlocked milling cutters |
|
|
IS 3019:1973 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for high speed steel butt -- Welded single point turning tools first revision |
|
|
IS 3239:1994 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Die stock for circular screwing dies -- Specification second revision |
|
|
IS 4914:1983 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for tap wrenches adjustable first revision |
|
|
IS 4921:1968 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for extension bars |
|
|
IS 5031:1992 ISO 2296-1972 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Saws -- Metal slitting -- Specification second revision |
|
|
IS 5100:1969 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills parallel shanks stub series for right hand cutting |
|
|
IS 5101:1991 Reviewed In : 2018 |
Twist drills parallel shank jobber series -- Specification first revision |
|
|
IS 5102:1969 ISO 494 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills parallel shank long series |
|
|
IS 5103:1969 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills morse taper shanks |
|
|
IS 5104:1969 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills oversize morse taper shank |
|
|
IS 5105:1969 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills taper square shanks for ratchet braces |
|
|
IS 5106:1969 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills taper square shanks for carpenters braces |
|
|
IS 5362:1969 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills parallel shanks stub series left hand cutting tor automatics |
|
|
IS 5363:2017 |
Micro-drills -- Specification second revision |
|
|
IS 5364:1969 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills for taper pin holes with taper 1 50 |
|
|
IS 5365:1991 ISO 7089 Reviewed In : 2018 |
Core drills parallel shanks -- Specification second revision |
|
|
IS 5366:1978 ISO 7079 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for core drills morse taper shanks first revision |
|
|
IS 5444:1978 ISO 236-1 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specification for parallel hand reamers with parallel shanks first revision |
|
|
IS 5445:1978 ISO 236-1 Reviewed In : 2018 |
Specification for long fluted machine reamers with morse taper shanks first revision |
|
|
IS 5446:2017 |
Machine chucking reamers with parallel shanks -- Specification second revision |
|
|
IS 5447:2017 |
Machine chucking reamers with morse taper shank -- Specification second revision |
|
|
IS/ISO 5604-4:2012 ISO 5609-4: 2012 Reviewed In : 2021 |
Tool holders for internal turning with cylindrical shank for indexable inserts Part 4 Style L |
|
|
IS/ISO 5609-1:2012 ISO 5609-1 : 2012 |
Tool holders for internal turning with cylindrical shank for indexable inserts Part 1 Designation styles dimensions and calculation for corrections |
|
|
IS/ISO 5609-2:2012 ISO 5609-2: 2012 Reviewed In : 2021 |
Tool holders for internal turning with cylindrical shank for indexable inserts Part 2 Style F |
|
|
IS/ISO 5609-3:2012 ISO 5609-3: 2012 Reviewed In : 2022 |
Tool holders for internal turning with cylindrical shank for indexable inserts Part 3 Style K |
|
|
IS/ISO 5609-5:2012 ISO 5609-5: 2012 Reviewed In : 2021 |
Tool holders for internal turning with cylindrical shank for indexable inserts Part 5 Style U |
|
|
IS/ISO 5609-6:2012 ISO 5609-6: 2012 Reviewed In : 2021 |
Tool holders for internal turning with cylindrical shank for indexable inserts Part 6 Style Q |
|
|
IS 5693:1988 ISO 4205 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for countersinks 90 with parallel shanks and solid pilots first revision |
|
|
IS 5698:1970 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for rotary form - relieved gear cutters for spur and helical gears |
|
|
IS 5702:1970 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for flat thread rolling dies |
|
|
IS 5703:1988 ISO 4204 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for countersinks 90 with morse taper shanks and detachable pilots first revision |
|
|
IS 5704:1988 ISO 4206 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for counterbores with parallel shanks and solid pilots first revision |
|
|
IS 5705:1988 ISO 4209 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for detachable pilots for use with counterbores and countersink 90 degree first revision |
|
|
IS 5710:1988 ISO 4207 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for counterbores with morse taper shanks and detachable pilots first revision |
|
|
IS 5881:1984 ISO 3465 Reviewed In : 2021 |
Specification for taper pin hand reamers first revision |
|
|
IS 5882:1970 Reviewed In : 2018 |
Specification for socket reamers with parallel shanks |
|
|
IS 5907:1970 Reviewed In : 2018 |
Specification for socket reamers with morse taper shanks |
|
|
IS 5918:1984 ISO 3467 Reviewed In : 2021 |
Specification for taper pin machine reamers with morse taper shanks first revision |
|
|
IS 5919:2018 2238 : 2011 |
Machine bridge reamers second revision |
|
|
IS 5926:1970 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specification for shell reamers |
|
|
IS 5927:1981 ISO 4202 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for reduction sleeves 7 24 tapers to morse tapers first revision |
|
|
IS 5936:1981 ISO 2402 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specification for arbors with morse taper shanks for shell tools first revision |
|
|
IS 5989:1998 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Hole mills -- Specification second revision |
|
|
IS 6175 (Part 1):1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps Part 1 Hand and short machine screwing taps for ISO metric screw threads sizes ml to m2 5 -- Specification second revision |
|
|
IS 6175 (Part 2):1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps Part 2 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m10 -- Specification second revision |
|
|
IS 6175 (Part 3):1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps Part 3 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches and m3 to m100 with fine pitches -- Specification second revision |
|
|
IS 6175 (Part 4):1991 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps Part 4 Long shank machine screwing taps for ISO metric screw threads sizes from m3 to m24 -- Specification |
|
|
IS 6175 (Part 5):1991 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps Part 5 Nut screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches -- Specification |
|
|
IS 6175 (Part 6):1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps Part 6 Screwing taps for pipe threads parallel g series -- Specification |
|
|
IS 6175 (Part 7):1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps Part 7 Screwing taps for pipe threads parallel rc series -- Specification |
|
|
IS 6175 (Part 8):1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Screwing taps Part 8 Screwing taps for pipe threads taper rc series -- Specification |
|
|
IS 6255:2013 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Inverse dovetail cutters and dovetail cutters with cylindrical shanks third revision |
|
|
IS 6256:1995 Reviewed In : 2021 |
Shell end single angle milling cutters -- Specification first revision |
|
|
IS 6257:1982 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for shell end mills first revision |
|
|
IS 6308:1982 ISO 2587-1972 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for side and face milling cutters first revision |
|
|
IS 6309:1982 ISO 2584-1972 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for cylindrical milling cutters first revision |
|
|
IS 6314:1982 ISO 3860 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for single corner rounding milling cutters first revision |
|
|
IS 6322:1982 ISO 3860 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for concave milling cutters first revision |
|
|
IS 6323:1982 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for convex milling cutters first revision |
|
|
IS 6324:1971 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for single angle milling cutters |
|
|
IS 6325:1971 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for double angle milling cutters |
|
|
IS 6326:1996 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Equal angle milling cutters -- Specification first revision |
|
|
IS 6352:2014 Reviewed In : 2019 |
Slot drills with parallel shank -- Specification second revision |
|
|
IS 6353:2014 Reviewed In : 2019 |
End mills with parallel shank -- Specification second revision |
|
|
IS 6355:1982 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for keyway milling cutters first revision |
|
|
IS 6388:2017 |
Slot drills with morse taper shank -- Specification second revision |
|
|
IS 6550:1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Thread milling cutter with parallel shank -- Specification first revision |
|
|
IS 6551:1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Thread milling cutters with morse taper shanks -- Specification first revision |
|
|
IS 6682:1991 ISO 238 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Morse taper extension sockets -- Specification first revision |
|
|
IS 6702:1991 ISO 238 Reviewed In : 2018 |
Morse taper reduction sleeves specification first revision |
|
|
IS 6708:1977 ISO 866 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for centre drills type A first revision |
|
|
IS 6709:1977 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for center drills type B first revision |
|
|
IS 6710:1977 ISO 2541 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for centre drills type R first revision |
|
|
IS 6776:1980 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for knurling wheels first revision |
|
|
IS/ISO 7388-3:2007 ISO 7388-3 : 2007 Reviewed In : 2018 |
Tool shanks with 7 24 taper for automatic tool changers Part 3 Retention knobs for shanks of forms AC AD AF UC UD UF JD and JF |
|
|
IS 7766:1975 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills for jig boring machines |
|
|
IS 7772:1975 ISO 3314 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for shell core drills |
|
|
IS 7822:2024 ISO 3291:2016 |
Extra-long Morse taper shank twist drills third revision |
|
|
IS 7823:2024 ISO 3292:2016 |
Extra-long parallel shank twist drills third revision |
|
|
IS 8305:1976 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for twist drills morse taper shank long series |
|
|
IS 8306:1976 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for carbide tipped twist drills morse taper shank |
|
|
IS 8307:1976 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for carbide tipped twist drills parallel shank |
|
|
IS 8405:2005 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Thread rolling cylindrical dies -- Specification first revision |
|
|
IS 8616:1993 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Stub milling arbors with self-release 7 24 taper and with key -- Specification first revision |
|
|
IS 8618:1977 ISO 8319-2 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for spacing collars for milling arbors |
|
|
IS 8619:1977 ISO 839-2 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for bearing collars for milling arbors |
|
|
IS 8620:1993 Reviewed In : 2023 |
Clamping nuts for milling arbors specification first revision |
|
|
IS 8621:1977 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for retaining screw for milling arbors |
|
|
IS 8842:1978 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for high speed steel butt - Welded single point planing tools |
|
|
IS 9323:1991 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped end mills with parallel shanks -- specification first revision |
|
|
IS 9324:1991 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped end mlls with morse taper shanks -- Specification first revision |
|
|
IS 9325:1996 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped slot drills with parallel shanks -- Specification first Revision |
|
|
IS 9326:1996 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Carbide tipped slot drills with morse taper and tapped end shanks -- Specification first revision |
|
|
IS 9771:1981 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Specification for carbide tipped core drills with morse taper shanks |