| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 13386 : 1992 |
Specification for Fire Extinguisher 50 Litre Capacity , Mechanical Foam Type |
CED 22 |
| 2 |
IS 907 : 1984 |
Specification for suction strainers, cylindrical type for fire fighting purposes (Second Revision) |
CED 22 |
| 3 |
IS 2097 : 2012 |
Foam making branch pipe and foam inductor - Specification (Second Revision) |
CED 22 |
| 4 |
IS 779 : 1994 |
Water meters (Domestic Type) - Specification (Sixth Revision) |
CED 3 |
| 5 |
IS 1711 : 1984 |
Specification for self - Closing taps for water supply purposes (second revision) |
CED 3 |
| 6 |
IS 432 : Part 1 : 1982 |
Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars |
CED 54 |
| 7 |
IS 11318 : 1985 |
Bronchoscope, Aspirating, Negus' Pattern |
MHD 4 |
| 8 |
IS 3913 : 2014 |
Hydrometry - Functional requirements and characteristics of suspended - Sediment samplers (Second Revision) |
WRD 1 |
| 9 |
IS 1837 : 1966 |
Specification for fanlight pivots |
CED 15 |
| 10 |
IS 1823 : 1980 |
Specification for floor door stoppers |
CED 15 |
| 11 |
IS 1019 : 1974 |
Specification for rim latches (Second Revision) |
CED 15 |
| 12 |
IS 7197 : 1974 |
Specification for double action floor springs (Without Oil Check) for heavy doors |
CED 15 |
| 13 |
IS 452 : 1973 |
Specification for door spring rat - Tail type (Second Revision) |
CED 15 |
| 14 |
IS 8756 : 1978 |
Specification for ball, catches for use in wooden almirahs |
CED 15 |
| 15 |
IS 9460 : 1980 |
Specification for flush drop handle for drawers |
CED 15 |
| 16 |
IS 9899 : 1981 |
Specification for hat, coat and wardrobe hooks |
CED 15 |
| 17 |
IS 10342 : 1982 |
Specification for curtain rail system |
CED 15 |
| 18 |
IS 2681 : 1993 |
Non - Ferrous metal sliding door bolts (Aldrops) for use with padlocks - Specification (Third Revision) |
CED 15 |
| 19 |
IS 6315 : 1992 |
Floor springs (hydraulically regulated) for heavy doors - |
CED 15 |
| 20 |
IS 204 : Part 2 : 1992 |
Tower bolts - Specification: Part 2 non - Ferrous metals (Fifth Revision) |
CED 15 |
| 21 |
IS 205 : 1992 |
Non - Ferrous metal butt specification (Fourth Revision) |
CED 15 |
| 22 |
IS 7711 : 1975 |
Curette, Adenoid, Beckmann's Pattern |
MHD 4 |
| 23 |
IS 7712 : 1975 |
Curette, Adenoid, St. Clair Thomson's Pattern |
MHD 4 |
| 24 |
IS 10994 : Part 5 : 1985 |
Specification for cartridges for shot guns: Part 5 anvil |
PGD 28 |
| 25 |
IS 8825 : 1978 |
Specification for cannula, suction irrigation with locking device, microlaryngeal |
MHD 4 |
| 26 |
IS 8837 : 1978 |
Specification for suction tubes with stylet microlaryngeal surgery |
MHD 4 |
| 27 |
IS 5559 : 1984 |
Specification for oilers (First Revision) |
PGD 19 |
| 28 |
IS 11618 : 1986 |
Specification for non - Regulating type liquid flow indicators |
PGD 19 |
| 29 |
IS 8413 : Part 1 : 1977 |
Requirements for biological treatment equipment: Part 1 Trickling filters |
CED 24 |
| 30 |
IS 2963 : 2013 |
Copper Alloy Waste Fittings and Waste Plug for Wash Basin and Sinks - Specification (second revision) (amalgamating IS 3311) |
CED 3 |
| 31 |
IS 6869 : Part 1 : 1973 |
Specification for playground equipment for parks: Part i general requirements |
PGD 41 |
| 32 |
IS 13466 : 1992 |
Brushes for electrical machines - Specification |
ETD 15 |
| 33 |
IS 453 : 1993 |
Double Acting Spring Hinges -Specification |
CED 15 |
| 34 |
IS 4473 : 2002 |
Domestic gas ovens for use with liquefied petroleum gases - Specification (First Revision) |
MED 23 |
| 35 |
IS 8749 : 2002 |
Biogas stove - Specification (Second Revision) |
MED 23 |
| 36 |
IS 15275 : 2003 |
Padlocks - Specification |
MED 33 |
| 37 |
IS 3847 : 1992 |
Mortice Night Latches-specification |
MED 33 |
| 38 |
IS 1046 : 2014 |
Cash boxes - Specification (Fourth Revision) |
MED 24 |
| 39 |
IS 14505 : 1998 |
Fire resisting magnetic media protection cabinets |
MED 24 |
| 40 |
IS 12187 : 1987 |
Specification for Coffers |
MED 24 |
| 41 |
IS 10864 : 2013 |
Metal jacketed gaskets for pipe flanges and heat exchanger flanges - Specification (First Revision) |
MED 30 |
| 42 |
IS 12166 : 1987 |
Specification for ratchet screwdrivers |
PGD 34 |
| 43 |
IS 12578 : 1989 |
Watch Maker's Hammer, Flat Face |
PGD 34 |
| 44 |
IS 2980 : 1999 |
Non - Pressure stoves - Specification (Third Revision) |
MED 26 |
| 45 |
IS 2787 : 2006 |
Oil pressure heaters - Specification (Third Revision) |
MED 26 |
| 46 |
IS 1384 : 1999 |
Oil pressure lanterns - Specification (Third Revision) |
MED 26 |
| 47 |
IS 1238 : 2005 |
Hurricane lanterns - Specification (Fifth Revision) |
MED 26 |
| 48 |
IS 4503 : 1967 |
Specification for shell and tube type heat exchangers |
MED 1 |
| 49 |
IS 2825 : 1969 |
Code for unfired pressure vessels |
MED 1 |
| 50 |
IS 9259 : 1979 |
Specification for liquid limit apparatus for soils |
CED 43 |
| 51 |
IS 9669 : 1980 |
Specification for cbr moulds and its accessories |
CED 43 |
| 52 |
IS 1899 : 1977 |
Specification for blow lamps (Second Revision) |
MED 26 |
| 53 |
IS 11760 : 1986 |
Specification for gravity - Fed kerosene wick stove |
MED 26 |
| 54 |
IS 5930 : 1970 |
Specification for mortice latch (Vertical Type) |
MED 33 |
| 55 |
IS 5554 : 1991 |
Lock washers with lug - Specification (First Revision) |
PGD 37 |
| 56 |
IS 6607 : 1972 |
Specification for rebated mortice locks (Vertical Type) |
MED 33 |
| 57 |
IS 8068 : 1976 |
Specification for tab washers |
PGD 37 |
| 58 |
IS 5576 : 1985 |
Specification for carriers, amalgam, dental, No. 1 and 2 (First Revision) |
MHD 8 |
| 59 |
IS 7676 : 1975 |
Specification for chisel, osseous, dental |
MHD 8 |
| 60 |
IS 1444 : 1989 |
Engineers Pattern Drawing Boards - Specification (Second Revision) |
PGD 22 |
| 61 |
IS 1492 : 1970 |
Specification for metric surveying chains (First Revision) |
PGD 22 |
| 62 |
IS 9717 : 1980 |
Specification for trays, impression, dental |
MHD 8 |
| 63 |
IS 2486 : Part 1 : 1993 |
Metal fittings of insulators for overhead power lines with nominal voltage greater than 1000 V - Specification: Part 1 general requirements and tests (Second Revision) |
ETD 6 |
| 64 |
IS 12683 : Part 2 : 1989 |
Artificial limbs - Measuring devices for visually impaired persons: Part 2 type |
MHD 9 |
| 65 |
IS 12683 : Part 3 : 2000 |
Measuring devices for visually impaired persons - Specification: Part 3 goniometer |
MHD 9 |
| 66 |
IS 1764 : 1961 |
Specification for trough compass |
PGD 22 |
| 67 |
IS 1779 : 1961 |
Specification for 4 - Metre, levelling staff, folding type |
PGD 22 |
| 68 |
IS 5153 : 1969 |
Specification for proportional compasses - 150, 200 and 300 mm |
PGD 22 |
| 69 |
IS 9892 : 1981 |
Specification for subtense bar |
PGD 22 |
| 70 |
IS 1056 : 2004 |
COMMERCIAL WEIGHTS — SPECIFICATION (Third Revision) |
PGD 26 |
| 71 |
IS 1058 : 1993 |
Legal metrology - Commercial capacity measures - Specification (Second Revision) |
PGD 26 |
| 72 |
IS 4670 : 1993 |
Legal Metrology - Liquor Measures - Specification (First Revision) |
PGD 26 |
| 73 |
IS 5041 : 1978 |
Specification for footwear and stationery eyelets (First Revision) |
PGD 14 |
| 74 |
IS 9682 : 1980 |
Recommended procedure for inspection of cast copper tuyeres |
MTD 8 |
| 75 |
IS 8150 : 1997 |
Shipbuilding - 45 Litre Capacity Chemical Foam Type Fire Engine, for Marine Use |
TED 19 |
| 76 |
IS 2563 : 1978 |
Specification for Hedge Sears, Straight - Edge Type (First Revision) |
FAD 11 |
| 77 |
IS 3092 : 1982 |
Specification for Rubber Draining and Tapping Knife (First Revision) |
FAD 11 |
| 78 |
IS 5135 : Part 1 : 1994 |
Specification for Hand - Rotary Duster : Part 1 Belly - Mounted Type (Second Revision) |
FAD 11 |
| 79 |
IS 7593 : Part 1 : 1986 |
Specification for Power - Operated Pneumatic Sprayer - Cum - Duster : Part 1 Knapsack Type (First Revision) |
FAD 11 |
| 80 |
IS 8501 : 1977 |
Specification for anaerobic jar |
MHD 10 |
| 81 |
IS 14236 : 1995 |
Sealsfor reciprocating applications used in fluid power systems methods of test |
PGD 36 |
| 82 |
IS 11313 : 2007 |
Hydraulic Power Sprayers - Specification (First Revision) |
FAD 11 |
| 83 |
IS 3391 : 1965 |
Specification for stethoscopes |
MHD 11 |
| 84 |
IS 8033 : 1976 |
Specification for round washers with square hole for wood fastenings |
PGD 37 |
| 85 |
IS 12996 : 1990 |
Internal combustion engines radiator pressure caps - Specification |
TED 2 |
| 86 |
IS 7611 : 1993 |
Internal combustion engines radiators - Specification (First Revision) |
TED 2 |
| 87 |
IS 3279 : 1966 |
General requirements for mushroom ventiliators |
TED 17 |
| 88 |
IS 8395 : Part 1 : 1977 |
Specification for cable terminations for automobile wiring: Part 1 blade type connectors (Male And Female) |
TED 11 |
| 89 |
IS 3942 : 1966 |
Specification for marine sounding rods |
TED 17 |
| 90 |
IS 6645 : 1972 |
Specification for service nameplates for marine valves and fittings |
TED 17 |
| 91 |
IS 17153 : 2019 |
Domestic gas stoves for use with piped natural gas (PNG) - Specification |
MED 23 |
| 92 |
IS 1342 : 2019 |
Oil pressure stoves - Specification (Seventh Revision) |
MED 26 |
| 93 |
IS 8654 : 2019 |
Automotive hydraulic brake fluid, heavy duty - Specification (Third Revision) |
PCD 25 |
| 94 |
IS 5116 : 2020 |
Domestic and Commercial Equipment for Use with LPG — General Requirements ( Fourth Revision ) |
MED 23 |
| 95 |
IS 8808 : 2019 |
Burners for oil pressure stoves and oil pressure heaters - Specification (Third Revision) |
MED 26 |
| 96 |
IS 958 : 2020 |
Temporary Corrosion Preventives, Grease Type, Soft Film ? Specification ( Third Revision ) |
PCD 25 |
| 97 |
IS 9131 : 1979 |
Specification for rim locks |
MED 33 |
| 98 |
IS 904 : 1983 |
Specification for 2 - Way and 4 - Way suction collecting heads for fire fighting purposes |
CED 22 |
| 99 |
IS/IEC 60079 : PART 1 : 2007 |
Explosive Atmospheres - Part 1 : Equipment Protection by Flameproof Enclosures d"""" |
ETD 22 |
| 100 |
IS 10594 : 1983 |
Specification for thermostatic expansion valves |
MED 3 |
| 101 |
IS 1153 : 2000 |
Temporary corrosion preventives, hard film, solvent deposited - Specification (Second Revision) |
PCD 25 |
| 102 |
IS 16280 : 2014 |
Unreduced pressure adaptors for use with liquefied petroleum gas (LPG) - Specification |
MED 16 |
| 103 |
IS 6799 : 1987 |
Specification for padlocks, bicycle (First Revision) |
MED 33 |
| 104 |
IS 14668 : 1999 |
Supporting screen and centrifugal liners for various types of centrifugal machines - Specification |
FAD 2 |
| 105 |
IS 729 : 1979 |
Specification for drawer locks cupboard locks and box locks (Third Revision) |
MED 33 |
| 106 |
IS 8931 : 1993 |
copper alloy fancy single taps, combination tap assembly and stop valves for water services |
CED 3 |
| 107 |
IS 550 : Part 1 : 2014 |
Safes: Part 1 specification (Fifth Revision) |
MED 24 |
| 108 |
IS 1154 : 2000 |
Temporary corrosion preventive fluid, soft film, solvent deposited, water displacing - Specification (First Revision) |
PCD 25 |
| 109 |
IS 16015 : 2013 |
Mortice locks with lever mechanism (Vertical Type, Sliding Door Locks And Dead Locks) - Specification |
MED 33 |
| 110 |
IS 12012 : 1992 |
Gas taps with or without flame failure device for domestic and commercial liquefied petroleum gas burning appliances - Specification (First Revision) |
MED 23 |
| 111 |
IS 14203 : 2017 |
Fire resisting record protection cabinets - Specification (Second Revision) |
MED 24 |
| 112 |
IS 6880 : 1972 |
Specification for machine, sewian (Vermicelli) |
MED 33 |
| 113 |
IS 8094 : 1976 |
Hook, Cerumen, Cawthorne's Pattern |
MHD 4 |
| 114 |
IS 10786 : 1984 |
Mirror, Rhinoscopic, ST. Clair Thomson's Pattern |
MHD 4 |
| 115 |
IS 3122 : 1982 |
Specification for Budding and Grafting Knife Combined (First Revision) |
FAD 11 |
