Home About Standards Downloads Reports Standard Of The Week Standard Of The Month FAQ Contact Us
�

Indian Standard Details

    Print

Basic Details
IS Number : IS 10322 (Part 1) : 2014
Reviewed In : 2019
IS Title [Eng-Hn] : Luminaires: Part 1 general requirements and tests (First Revision)
No of Revision : 0
No of Amendments : 1
Technical Department : Electrotechnical Department
Technical Committee : ETD 49 ( Illumination Engineering and Luminiaries )
Language : English

Classification Details
Group : Electrical Appliances and Accessories
Sub Group: Lamps, Luminaire and Accessories
Sub Sub Group : Luminaires & lighting
Aspects: Product Specification
Certification: Voluntary Certification
Ministry : Ministry of Power, Ministry of Electronics and Information Technology
Short Commom Man's Title: Luminaires Part 1 General Requirements and Tests
Itchs:
Degree of Equivalence: Modified/Technically Equivalent
Identical/Equivalent Standards:IEC 60598-1(2003-10)
Organisation :

Cross Referencing Details
Indian Standards Refered In IS IS 10322 : Part 1 : 2014 :
SNo IS Number Title Technical Committee
1
IS 616 : 2017 Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision) LITD 7
2
IS 694 : 2010 Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 V (Fourth Revision) ETD 9
3
IS 1271 : 2012 Electrical insulation - Thermal evaluation and designation (Second Revision) ETD 2
4
IS 1293 : 2005 Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision) ETD 14
5
IS 1401 : 2008 Protection of persons and equipment by enclosures - Probes for verification (Second Revision) ETD 32
6
IS 1416 : 1972 Specification for safety transformers (First Revision) ETD 32
7
IS 2824 : 2007 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (Second Revision) ETD 2
8
IS 3010 : Part 1 : 1965 Specification for appliance - connectors and appliance - Inlets (Non - Reversible Three - Pin Type): Part 1 appliance - Connectors ETD 14
9
IS 3010 : Part 2 : 1965 Specification for appliance - Connectors and appliance - Inlets (Non - Reversible Three - Pin Type): Part 2 appliance - inlets ETD 14
10
IS 3323 : 1980 Specification for bi-pin landholders for tubular fluorescent lamps (First Revision) ETD 14
11
IS 5921 : Part 1 : 1993 Metal-clad base materials for printed circuits for use in electronic and telecommunication equipment: Part 1 General requirements and test LITD 5
12
IS 6616 : 1982 Ballasts for high pressure mercury vapour lamps ETD 23
13
IS 7809 : Part 3 : Sec 5 : 1977 Specification for pressure sensitive adhesive tapes for electrical purposes: Part 3 specifications for individual materials: Sec 5 cellulosic paper with thermosetting adhesive ETD 2
14
IS 7809 : Part 3 : Sec 4 : 1977 Specification for pressure sensitive adhesive tapes for electrical purposes: Part 3 specifications for individual materials: Sec 4 cellulosic paper, creped with thermosetting adhesive ETD 2
15
IS 7809 : Part 3 : Sec 3 : 1981 Specification for pressure sensitive adhesive tapes for electrical purposes: Part 3 specification for individual materials: Sec 3 polyster film tapes (PETP) with non - Thermosetting adhesive ETD 2
16
IS 7809 : Part 3 : Sec 2 : 1981 Specification for pressure sensitive adhesive tapes for electrical purposes: Part 3 Specifications for individual materials: Sec 2 Polyester film tapes (PETP) with thermosetting adhesive ETD 2
17
IS 7809 : Part 3 : Sec 1 : 1986 Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision) ETD 2
18
IS 7809 : Part 2 : 1977 Specification for pressure sensitive adhesive tapes for electrical purpose : Part 2 methods of test ETD 2
19
IS 7809 : Part 1 : 1975 Specification for pressure sensitive adhesive tapes for electrical purposes: Part 1 general requirements ETD 2
20
IS 8913 : 1978 Method of measurement of lamp cap temperature rise ETD 23
21
IS 9000 : Part 7 : Sec 1 to 5 : 1979 Basic environmental testing procedures for electronic and electrical items: Part 7 impact test LITD 1
22
IS 9968 : Part 1 : 1988 Specification for elastomer insulated cables: Part 1 for working voltages up to and including 1100 volts (First Revision) ETD 9
23
IS 9974 : Part 1 : 1981 Specification for high pressure sodium vapour lamps: Part 1 general requirements and tests ETD 23
24
IS 9974 : Part 2 : 1981 Specification for high pressure sodium vapour lamps: Part 2 standard lamp data sheets ETD 23
25
IS 10276 : Part 2 : 1982 Specification for edison screw lampholders: Part 2 standard data sheets for lampholders and gauges ETD 14
26
IS 10322 : Part 5 : Sec 4 : 1987 Specification for luminaires: Part 5 particular requirements: Sec 4 portable general purpose luminaires ETD 49
27
IS 11000 : Part 2 : Sec 2 : 2008 Fire hazard testing: Part 2 test methods: Sec 2 needle - Flame test method - Apparatus, cofirmatory test arrangement and guidance (First Revision) LITD 1
28
IS 11000 : Part 2 : Sec 1 : 2018 Fire hazard testing: Part 2 test methods: Sec 1 glow - Wire apparatus and common test procedure (Second Revision) LITD 1
29
IS 11654 : Part 3 : Sec 407 : 1989 Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 407 glass textile sleeving with pvc based coating - Medium breakdown strength ETD 2
30
IS 11654 : Part 3 : Sec 406 : 1989 Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 406 glass textile sleeving with pvc based coating - High breakdown strength ETD 2
31
IS 11654 : Part 3 : Sec 405 : 1989 Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 405 glass textile sleeving with acrylic based coating - Lower breakdown strength ETD 2
32
IS 11654 : Part 3 : Sec 404 : 1989 Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 404 glass textile sleeving with acrylic based coating - Medium breakdown strength ETD 2
33
IS 11654 : Part 3 : Sec 403 : 1989 Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 403 glass textile sleeving with acrylic based coating - High breakdown strength ETD 2
34
IS 11654 : Part 3 : Sec 103 : 1989 Specification for flexible insulating sleevings: Part 3 specifications for individual types of sleevings: Sec 103 general purpose - Grade sleeving with unilateral tolerances with temperature index 90 ETD 2
35
IS 11654 : Part 3 : Sec 1 : 1988 Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 1 general purpose grade sleeving with temperature index 90 ETD 2
36
IS 11654 : Part 2 : 1986 Specification for flexible insulating sleeving: Part 2 methods of test ETD 2
37
IS 11654 : Part 1 : 1986 Specification for flexible insulating sleeving: Part 1 definitions and general requirements ETD 2
38
IS 12063 : 1987 Classification of Degrees of Protection Provided by Enclosures of Electrical Equipment ETD 1
39
IS 15382 : Part 1 : 2014 Insulation coordination for equipment within low - Voltage systems: Part 1 principles, requirements and tests (First Revision) ETD 19
40
IS 15382 : Part 3 : 2019 Insulation coordination for equipment within low-voltage systems : Part 3 use of coating potting or moulding for protection against pollution ETD 19
41
IS 12948 : 1990 Tungsten halogen lamps (Non - Vehicle) - Specification ETD 23
42
SP 30 : 2011 National electrical code 2011 (First Revision) ETD 20
43
IS/QC 302400 : 1994 Fixed capacitors for use in electronic equipment: Sectional specification for fixed capacitors for electromagnetic interference suppression and connection to the supply mains LITD 5
International Standards Refered In IS 10322 : Part 1 : 2014
SNo International Standard Number
1 IEC 60038 : 1983
2 IEC 60086 : 4 : 2000
3 IEC 60107 : 1 : 1997
4 IEC 60127 : 6 : 0 0
5 IEC 60227 : 2 : 1997
6 IEC 60320 : 0 : 0 0
7 IEC 60410 : 1973
8 IEC 60695 : 11 : 5 2004
9 IEC 60730 : 1 : 2010
10 IEC 60747 : 5 : 5 2007
11 IEC 60825 : 1 : 2007
12 IEC 60906 : 0 : 0 0
13 IEC 60990 : 0 : 0 0
14 IEC 60998 : 2 : 2
15 IEC 60999 : 1 : 0 0
16 IEC 61032 : 1997
17 IEC 61058 : 1 : 2000
18 IEC 61149 : 0 : 0 0
19 IEC 61293 : 0 : 0 0
20 IEC 61558 : 1 : 2005
21 IEC 61558 : 2 : 16
22 IEC 61558 : 2 : 17
23 IEC 61965 : 0 : 0 0
24 IEC 62133 : 0 : 0 0
25 IEC 62151 : 2000
26 IEC 104 : 0 : 0 0
27 IEC 112 : 0 : 0 0
28 ISO 2859 : 1 : 1999
29 ISO 7000 : 0 : 0 0
30 ISO 9773 : 0 : 0 0
31 IEC 60027 : 0 : 0 0
32 IEC 60068 : 2 : 6 2007
33 IEC 60068 : 2 : 31 2008
34 IEC 60068 : 2 : 75
35 IEC 60068 : 2 : 78
36 IEC 60085 : 0 : 0 0
37 IEC 60112 : 0 : 0 0
38 IEC 60127 : 0 : 0 0
39 IEC 60167 : 1964
40 IEC 60216 : 0 : 0 0
41 IEC 60227 : 0 : 0 0
42 IEC 60245 : 0 : 0 0
43 IEC 60249 : 2 : 0 0
44 IEC 60268 : 1 : 1985
45 IEC 60317 : 43 : 0 0
46 IEC 60335 : 1 : 0 0
47 IEC 60384 : 1 : 2008
48 IEC 60384 : 14 : 2005
49 IEC 60417 : 0 : 0 0
50 IEC 60454 : 0 : 0 0
51 IEC 60529 : 1989
52 IEC 60664 : 1 : 2007
53 IEC 60664 : 3 : 0 0
54 IEC 60691 : 2002
55 IEC 60695 : 2 : 2 1991
56 IEC 60707 : 1999
57 IEC 60851 : 3 : 1 2009
58 IEC 60884 : 0 : 0 0
59 IEC 60950 : 1 : 2005
60 IEC 61051 : 2 : 1991
61 IEC 61260 : 0 : 0 0
62 ISO 261 : 0 : 0 0
63 ISO 262 : 0 : 0 0
64 ISO 306 : 2004
65 IEC 60038 : 1983
66 IEC 60086 : 4 : 2000
67 IEC 60107 : 1 : 1997
68 IEC 60127 : 6 : 0 0
69 IEC 60227 : 2 : 1997
70 IEC 60320 : 0 : 0 0
71 IEC 60410 : 1973
72 IEC 60695 : 11 : 5 2004
73 IEC 60730 : 1 : 2010
74 IEC 60747 : 5 : 5 2007
75 IEC 60825 : 1 : 2007
76 IEC 60906 : 0 : 0 0
77 IEC 60990 : 0 : 0 0
78 IEC 60998 : 2 : 2
79 IEC 60999 : 1 : 0 0
80 IEC 61032 : 1997
81 IEC 61058 : 1 : 2000
82 IEC 61149 : 0 : 0 0
83 IEC 61293 : 0 : 0 0
84 IEC 61558 : 1 : 2005
85 IEC 61558 : 2 : 16
86 IEC 61558 : 2 : 17
87 IEC 61965 : 0 : 0 0
88 IEC 62133 : 0 : 0 0
89 IEC 62151 : 2000
90 IEC 104 : 0 : 0 0
91 IEC 112 : 0 : 0 0
92 ISO 2859 : 1 : 1999
93 ISO 7000 : 0 : 0 0
94 ISO 9773 : 0 : 0 0
95 IEC 60027 : 0 : 0 0
96 IEC 60068 : 2 : 6 2007
97 IEC 60068 : 2 : 31 2008
98 IEC 60068 : 2 : 75
99 IEC 60068 : 2 : 78
100 IEC 60085 : 0 : 0 0
101 IEC 60112 : 0 : 0 0
102 IEC 60127 : 0 : 0 0
103 IEC 60167 : 1964
104 IEC 60216 : 0 : 0 0
105 IEC 60227 : 0 : 0 0
106 IEC 60245 : 0 : 0 0
107 IEC 60249 : 2 : 0 0
108 IEC 60268 : 1 : 1985
109 IEC 60317 : 43 : 0 0
110 IEC 60335 : 1 : 0 0
111 IEC 60384 : 1 : 2008
112 IEC 60384 : 14 : 2005
113 IEC 60417 : 0 : 0 0
114 IEC 60454 : 0 : 0 0
115 IEC 60529 : 1989
116 IEC 60664 : 1 : 2007
117 IEC 60664 : 3 : 0 0
118 IEC 60691 : 2002
119 IEC 60695 : 2 : 2 1991
120 IEC 60707 : 1999
121 IEC 60851 : 3 : 1 2009
122 IEC 60884 : 0 : 0 0
123 IEC 60950 : 1 : 2005
124 IEC 61051 : 2 : 1991
125 IEC 61260 : 0 : 0 0
126 ISO 261 : 0 : 0 0
127 ISO 262 : 0 : 0 0
128 ISO 306 : 2004
IS 10322 : Part 1 : 2014 is Refered in following Indian Standards :
SNo IS Number Title Technical Committee
1 IS 12274 : 1987 Safety requirements for electronic flash apparatus for photographic purposes LITD 7
2 SP 7 : Group 1 : 2005 National Building Code--Of India 2005 Group 1 CED 46
3 IS/IEC 60079 : Part 15 : 2010 Explosive atmospheres: Part 15 equipment protection by type of protection "N" (First Revision) ETD 22
4 IS 13021 : Part 1 : 1991 AC supplied electronic ballasts for tubular fluorescent lamps - Specification: Part 1 general and safety requirements ETD 23
5 IS 15967 : Part 1 : 2013 Capacitors for use in tubular fluorescent and other discharge lamp circuits: Part 1 safety requirements ETD 23
6 IS 15974 : 2013 Auxiliaries for lamps starting devices (Other Than Glow Starters) - Performance requirements ETD 23
7 IS 16102 : Part 1 : 2012 Self - Ballasted led lamps for general lighting services: Part 1 safety requirements ETD 23
8 IS 16103 : Part 1 : 2012 Led modules for general lighting: Part 1 safety requirements ETD 23
9 IS 16103 : Part 2 : 2012 Led modules for general lighting: Part 2 performance requirements ETD 23
10 IS 10322 : Part 4 : 1984 Luminaires - Part 4 : Methods of Tests ETD 23
11 IS 16107 : Part 1 : 2012 Luminaires performance: Part 1 general requirements ETD 49
12 IS 16107 : Part 2 : Sec 1 : 2012 Luminaires performance: Part 2 particular requirements: Sec 1 led luminaire ETD 49
13 IS 10322 : Part 5 : Sec 1 : 2012 Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision) ETD 49
14 IS 10322 : Part 5 : Sec 2 : 2012 Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision) ETD 49
15 IS 10322 : PART 5 : SEC 3 : 2012 Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision) ETD 49
16 IS 10322 : Part 5 : Sec 5 : 2013 Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision) ETD 49
17 IS 10322 : Part 5 : Sec 6 : 2013 Luminaires: Part 5 particular requirements: Sec 6 handlamps ETD 49
18 IS 10322 : Part 5 : Sec 7 : 2017 Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision) ETD 49
19 IS 10322 : Part 5 : Sec 8 : 2013 Luminaires: Part 5 particular requirements: Sec 8 emergency lighting ETD 49
20 IS 302 : Part 1 : 2008 Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision) ETD 32
21 IS 15885 : PART 1 : 2011 Safety of lamp controlgear: Part 1 general requirements ETD 23
22 IS 15885 : PART 2 : SEC 1 : 2011 Safety of lamp control gear: Part 2 particular requirements: Sec 1 starting devices (Other Than Glow Starters) ETD 23
23 IS 732 : 2019 Code of practice for electrical wiring installations (Fourth Revision) ETD 20
24 IS/IEC 61730 : PART 2 : 2019 Photovoltaic (PV) module safety qualification: Part 2 requirements for testing (First Revision) ETD 28
25 IS 6873 : Part 5 : 2019 Limits and Methods of Measurement of Radio Disturbance Characteristics Part 5 Electrical Lighting and Similar Equipment ( Third Revision ) LITD 9
26 IS 2418 : Part 1 : 2018 Tubular fluorescent lamps for general lighting service: Part 1 safety requirements (Second Revision) ETD 23
27 IS 2418 : Part 2 : 2018 Tubular fluorescent lamps for general lighting service: Part 2 performance requirements (Second Revision) ETD 23
28 IS 16614 : Part 1 : 2018 Double- Capped LED Linear Lamps Part1 Safety Specification ETD 23
29 IS 13450 : Part 2 : Sec 22 : 2021 Medical electrical equipment Part 2 Particular requirements for basic safety and essential performance Section 22 surgical cosmetic therapeutic and diagnostic laser equipment First Revision MHD 15
30 IS/IEC 60079 : PART 7 : 2015 Explosive atmospheres: Part 7 equipment protection by increased safety "E" (First Revision) ETD 22