| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 253 : 2014 |
Specification for common salt (Fourth Revision) |
FAD 8 |
| 2 |
IS 7224 : 2006 |
Iodized salt, vacuum evaporated iodized salt and refined iodized salt - Specification (Second Revision) |
FAD 8 |
| 3 |
IS 12981 : 1991 |
Common salt - Iron fortified - Specification |
FAD 8 |
| 4 |
IS 16232 : 2014 |
Iron fortified iodized salt (Double Fortified Salt) - Food grade - Specification |
FAD 8 |
| 5 |
IS 2404 : 1993 |
Malt extract - Specification (Second Revision) |
FAD 16 |
| 6 |
IS 3316 : 1974 |
Structural Granite |
CED 6 |
| 7 |
IS 3620 : 1979 |
Laterite Stone Block For Masonry |
CED 6 |
| 8 |
IS 3622 : 1977 |
Sandstone (slabs And Tiles) |
CED 6 |
| 9 |
IS 6250 : 1981 |
Specification for roofing slate tiles |
CED 6 |
| 10 |
IS 920 : 1972 |
Specification for common salt and cattle licks for animal consumption (First Revision) |
FAD 5 |
| 11 |
IS 14183 : 1994 |
Pesticide - Cartap hydrochloride SP - Specification |
FAD 1 |
| 12 |
IS 3648 : 1975 |
Specification for rice bran as livestock feed (First Revision) |
FAD 5 |
| 13 |
IS 14609 : 1999 |
Dry chemical powder for fighting a,b,c, class fires specification |
CED 22 |
| 14 |
IS 4307 : 1983 |
Specification for fish meal as livestock feed ingredient (Second Revision) |
FAD 5 |
| 15 |
IS 5470 : 2002 |
Dicalcium phosphate, animal feed grade - Specification (First Revision) |
FAD 5 |
| 16 |
IS 5672 : 1992 |
Mineral mtxtures for supplementing poultry feeds - Specification (First Revision) |
FAD 5 |
| 17 |
IS 1675 : 1971 |
Specification for stearic acid, technical (First Revision) |
FAD 13 |
| 18 |
IS 612 : 1992 |
Roasted chicory powder - Specification (Third Revision) |
FAD 6 |
| 19 |
IS 10932 : 1984 |
Specification for palmitic acid |
FAD 13 |
| 20 |
IS 10933 : 1984 |
Specification for myristic acid |
FAD 13 |
| 21 |
IS 1283 : 1995 |
Bicycles - Free - Wheels - Specification (Second Revision) |
TED 16 |
| 22 |
IS 3319 : 1995 |
Blades, surgical, detachable (Bard Parker Type) and handles - Specification (Fourth Revision) |
MHD 1 |
| 23 |
IS 651 : 2007 |
Glazed stoneware pipes and fittings - Specification (Sixth Revision) |
CED 3 |
| 24 |
IS 3642 : Part 1 : 1990 |
Surgical instruments - Specification: Part 1 non - Cutting, articulated instruments (Second Revision) |
MHD 1 |
| 25 |
IS 771 : Part 7 : 1981 |
Specification for glazed fire - Clay sanitary appliances: Part 7 specific requirements of (Second Revision) |
CED 3 |
| 26 |
IS 772 : 1973 |
Specification for general requirements for enamelled cast iron sanitary appliances |
CED 3 |
| 27 |
IS 653 : 1992 |
Linoleum Sheets And Tiles |
CED 5 |
| 28 |
IS 809 : 1992 |
Rubber flooring materials for general purposes - Specification (First Revision) |
CED 5 |
| 29 |
IS 13801 : 2013 |
Chequered Cement Concrete Tiles - |
CED 5 |
| 30 |
IS 837 : 1982 |
Specification for doffer and flat stripping comb blades (first revision) |
TXD 14 |
| 31 |
IS 4457 : 2007 |
Ceramic unglazed vitreous acid resisting tiles - Specification (Second Revision) |
CED 5 |
| 32 |
IS 779 : 1994 |
Water meters (Domestic Type) - Specification (Sixth Revision) |
CED 3 |
| 33 |
IS 781 : 1984 |
Specification for cast copper alloy screw down bib taps and stop valves for water services (Third Revision) |
CED 3 |
| 34 |
IS 1711 : 1984 |
Specification for self - Closing taps for water supply purposes (second revision) |
CED 3 |
| 35 |
IS 15583 : 2005 |
Compressed Helium Gas - Specification |
CHD 6 |
| 36 |
IS 5760 : 1998 |
Argon, Compressed and Liquid - Specification (Second Revision) |
CHD 6 |
| 37 |
IS 5610 : 1993 |
Chloro - Fluoro Hydrocarbons of the Methane and Ethane Series - Specification (Second Revision) |
CHD 6 |
| 38 |
IS 1090 : 2002 |
Compressed Hydrogen - Specification (Third Revision) |
CHD 6 |
| 39 |
IS 9695 : 1980 |
Methods for sampling of helmets |
CED 22 |
| 40 |
IS 7193 : 2013 |
Glass Fibre Base Bitumen Felts |
CED 41 |
| 41 |
IS 14695 : 1999 |
Glass fibre base coal tar pitch outerwrap - Specification |
CED 41 |
| 42 |
IS 1548 : 1981 |
Manual on basic principles of lot sampling (Second Revision) |
MSD 3 |
| 43 |
IS 10427 : Part 1 : 1982 |
Designs for industrial experimentation: Part 1 standard designs |
MSD 3 |
| 44 |
IS 10427 : Part 2 : 2006 |
Designs for industrial experimentation: Part 2 orthogonal arrays (First Revision) |
MSD 3 |
| 45 |
IS 1834 : 1984 |
Hot Applied Sealing Compounds for Joints in Concrete- Specification |
CED 13 |
| 46 |
IS 9165 : Part 1 : 1992 |
Surgical instruments - Needles, suture: Part 1 specification (First Revision) |
MHD 1 |
| 47 |
IS 11497 : 2014 |
Catheter, Foley’s Rubber, for Prolonged Urinary Drainage — Specification |
MHD 1 |
| 48 |
IS 874 : 1992 |
Dextrose monohydrate - Specification (Third Revision) |
FAD 16 |
| 49 |
IS 10 : Part 2 : 2013 |
Plywood tea - Chests - Specification: Part 2 plywood (Sixth Revision) |
CED 9 |
| 50 |
IS 10 : Part 3 : 1974 |
Plywood Tea-Chests: Part-3 Battens |
CED 9 |
| 51 |
IS 10 : Part 4 : 1989 |
Plywood tea - Chests - specification: Part 4 metal fittings |
CED 9 |
| 52 |
IS 1707 : 1979 |
Specification for wood wool for general packaging purposes |
CED 9 |
| 53 |
IS 2455 : 1990 |
Method of sampling of model trees and logs and their conversion for timber testing (Second Revision) |
CED 9 |
| 54 |
IS 2922 : 1975 |
Specification for wooden tent mallets |
CED 9 |
| 55 |
IS 7850 : 1975 |
Specification for wooden box for microscope slides |
CED 9 |
| 56 |
IS 8720 : 1978 |
Methods of sampling of timber scantlings from depots and their conversion for testing |
CED 9 |
| 57 |
IS 3386 : 1979 |
Wooden Fence Posts |
CED 9 |
| 58 |
IS 12815 : 1989 |
Surgical instruments - Knife autopsy - Specification |
MHD 1 |
| 59 |
IS 12822 : 1989 |
Surgical Instruments - Forceps Intestinal Mayo-Robson's Pattern |
MHD 1 |
| 60 |
IS 12841 : Part 1 : 1989 |
Surgical Instruments - Needle Holders - Part 1 : Mathieu's Pattern |
MHD 1 |
| 61 |
IS 6643 : 1987 |
Wooden Pins For Bivouac Tents |
CED 9 |
| 62 |
IS 12841 : Part 2 : 1989 |
Surgical Instruments - Needle Holders - Part 2 : With Carbide Inserts, Stratte's Pattern |
MHD 1 |
| 63 |
IS 12841 : Part 3 : 1989 |
Surgical Instruments - Needle Holders - Part 3 : Heaney's Pattern |
MHD 1 |
| 64 |
IS 12841 : Part 4 : 1989 |
Surgical Instruments - Needle Holders - Part 4 : with Carbide Inserts, Debakey's Pattern |
MHD 1 |
| 65 |
IS 1061 : 2017 |
Disinfectant fluids, phenolic type - Specification (Fifth Revision) |
CHD 25 |
| 66 |
IS 8540 : 1986 |
Specification for glass cleaner, liquid (First Revision) |
CHD 25 |
| 67 |
IS 15267 : 2003 |
Zeolite detergent grade - Specification |
CHD 25 |
| 68 |
IS 11319 : 1985 |
Oesophagoscope, Negus' Pattern |
MHD 4 |
| 69 |
IS 6452 : 1989 |
High alumina cement for structural use - specification (First Revision) |
CED 2 |
| 70 |
IS 3466 : 1988 |
Specification For Masonry Cement |
CED 2 |
| 71 |
IS 12600 : 1989 |
Portland cement, low heat - specification |
CED 2 |
| 72 |
IS 8112 : 2013 |
Ordinary Portland Cement, 43 Grade |
CED 2 |
| 73 |
IS 8043 : 1991 |
Specification for hydrophobic Portland cement |
CED 2 |
| 74 |
IS 6909 : 1990 |
Supersulphated cement ? specification |
CED 2 |
| 75 |
IS 1489 (Part 1) : 2015 |
Portland pozzolana cement - Specification: Part 1 fly Ash Based |
CED 2 |
| 76 |
IS 1489 : Part 2 : 2015 |
Portland - Pozzolana cement - Specification: Part 2 calcined clay based |
CED 2 |
| 77 |
IS 10013 : Part 1 : 1981 |
Water Soluble Type Wood Preservatives: Part 1 Acid-Copper-Chrome (Acc) Preservative |
CED 9 |
| 78 |
IS 10013 : Part 2 : 1981 |
Water Soluble Type Wood Preservatives: Part 2 Copper-Chrome-Arsenic (Cca) Wood Preservative |
CED 9 |
| 79 |
IS 10013 : Part 3 : 1981 |
Water Soluble Type Wood Preservatives: Part 3 Copper-Chrome-Boron (Ccb) Wood Preservative |
CED 9 |
| 80 |
IS 10499 : 1983 |
Specification for wooden toggles |
CED 9 |
| 81 |
IS 11100 : 1984 |
Specification for sweeping brooms |
CED 9 |
| 82 |
IS 11215 : 1991 |
Moisture content of timber and timber products - Methods for determination (First Revision) |
CED 9 |
| 83 |
IS 10012 : 1981 |
Specification for dental zinc oxide/eugenol filling materials |
MHD 8 |
| 84 |
IS 6343 : 1982 |
Specification for Door Closers (Pneumatically Regulated) for Light Doors Weighing up to 40 kg |
CED 15 |
| 85 |
IS 7534 : 1985 |
Specificaiton for sliding locking bolts for use with padlocks |
CED 15 |
| 86 |
IS 10342 : 1982 |
Specification for curtain rail system |
CED 15 |
| 87 |
IS 362 : 1991 |
Parliament Hinges -specification |
CED 15 |
| 88 |
IS 3843 : 1995 |
Steel back flap hinges -Specification |
CED 15 |
| 89 |
IS 363 : 1993 |
Hasps And Staples -specification |
CED 15 |
| 90 |
IS 364 : 1993 |
Fanlight Catch -Specification |
CED 15 |
| 91 |
IS 11317 : 1985 |
Specification for shears, laboratory, straight, dental |
MHD 8 |
| 92 |
IS 11394 : 1985 |
Specification for pliers, distal end cutting, with safety hold, dental |
MHD 8 |
| 93 |
IS 11628 : 1986 |
Specification for agar impression material |
MHD 8 |
| 94 |
IS 11929 : 1986 |
Specification for adopters, band, dental |
MHD 8 |
| 95 |
IS 12507 : 1988 |
General requirements for dental pliers |
MHD 8 |
| 96 |
IS 13540 : Part 1 : 1992 |
Arms and ammunition - 4.5 mm (177) air rifle and air pistol pellets: Part 1 general purpose |
PGD 28 |
| 97 |
IS 13541 : Part 1 : 1993 |
Arms and ammunition - 55 mm (. 22) air rifle and air pistol pellets: Part 1 general purpose |
PGD 28 |
| 98 |
IS 8041 : 1990 |
Rapid hardening portland cement - Specific4tion (Second Revision) |
CED 2 |
| 99 |
IS 15803 : 2008 |
Respiratory Protective Devices - Self Contained Closed Circuit Breathing Apparatus Chemical Oxygen (KO2) Type, Self Generating, Self Rescuers - Specification |
CHD 8 |
| 100 |
IS 14746 : 1999 |
Respiratory Protective Devices - Half Masks and Quarter Masks - Specification |
CHD 8 |
| 101 |
IS 14744 : 1999 |
Flame retardent protective hoods - Specification |
TXD 32 |
| 102 |
IS 1003 : Part 2 : 1994 |
Timber Panelled And Glazed Shutters: Part 2 Windows and Ventilator Shutters |
CED 11 |
| 103 |
IS 15931 : 2012 |
Solid Panel Foam UPVC Door Shutters - Specification |
CED 11 |
| 104 |
IS 9394 : 1979 |
Stone Lintels |
CED 6 |
| 105 |
IS 4009 : Part 1 : 1981 |
Specification for grease nipples: Part 1 button head grease nipples (First Revision) |
PGD 19 |
| 106 |
IS 4009 : Part 3 : 1995 |
Lubritcating Equipment - Grease Nipples Part 3 Cup Type - Specification |
PGD 19 |
| 107 |
IS 5548 : 1970 |
SpeciftCation for lubricating nipple adaptors |
PGD 19 |
| 108 |
IS 5559 : 1984 |
Specification for oilers (First Revision) |
PGD 19 |
| 109 |
IS 11618 : 1986 |
Specification for non - Regulating type liquid flow indicators |
PGD 19 |
| 110 |
IS 4351 : 2003 |
Steel Door Frames - |
CED 11 |
| 111 |
IS 3461 : 1980 |
Pvc-asbestos Floor Tiles |
CED 5 |
| 112 |
IS 3462 : 1986 |
Unbacked Flexible Pvc Flooring |
CED 5 |
| 113 |
IS 8272 : 1984 |
Specification for gypsum plaster for use in the manufacture of fibrous plaster boards |
CED 4 |
| 114 |
IS 15648 : 2006 |
Pulverized fuel ash for lime - Pozzolana mixture applications - Specification |
CED 4 |
| 115 |
IS 2547 : Part 2 : 1976 |
Specification for gypsum building plasters: Part 2 premixed lightweight plasters |
CED 4 |
| 116 |
IS 2849 : 1983 |
Specification for non - Load bearing gypsum partition blocks (Solid And Hollow Types) |
CED 4 |
| 117 |
IS 8920 : 1978 |
Methods for sampling of burnt clay tiles |
CED 30 |
| 118 |
IS 8042 : 2015 |
White portland cement - Specification (Third Revision) |
CED 2 |
| 119 |
IS 12330 : 1988 |
Specificatioon for sulphate resisting Portland cement |
CED 2 |
| 120 |
IS 5030 : Part 3 : 2005 |
Metal cutting bandsaw blade -- Specification: Part 3 Dimensions and other requirements (second revision) |
PGD 32 |
| 121 |
IS 15698 : 2006 |
Dehydwted bamboo shoots - Specification |
FAD 10 |
| 122 |
IS 7778 : Part 1 : 2003 |
Small tools sampling inspection procedures: Part 1 Twist drills, countersink and counterbores (first revision) |
PGD 32 |
| 123 |
IS 7778 : Part 2 : 2003 |
Small tools sampling inspection procedures: Part 2 Reamers (first revision) |
PGD 32 |
| 124 |
IS 7778 : Part 3 : 2003 |
Small tools sampling inspection procedures: Part 3 Sleeves, sockets and adaptors (first revision) |
PGD 32 |
| 125 |
IS 7778 : Part 4 : 2003 |
Small tools sampling inspection procedures: Part 4 Screwing taps, dies and knurling tools (first revision) |
PGD 32 |
| 126 |
IS 7778 : Part 5 : 2003 |
Small tools sampling inspection procedures: Part 5 Milling cutters (first revision) |
PGD 32 |
| 127 |
IS 7778 : Part 6 : 2003 |
Small tools sampling inspection procedures: Part 6 Milling arbors and accessories (first revision) |
PGD 32 |
| 128 |
IS 7778 : Part 7 : 2003 |
Small tools sampling inspection procedures: Part 7 Gear cutting tools and broaches (first revision) |
PGD 32 |
| 129 |
IS 7778 : Part 8 : 2003 |
Small tools sampling inspection procedures: Part 8 Saws (first revision) |
PGD 32 |
| 130 |
IS 7778 : Part 9 : 2003 |
Small tools sampling inspection procedures: Part 9 Single point (HSS And Carbide Tipped) tools (first revision) |
PGD 32 |
| 131 |
IS 7778 : Part 10 : 2003 |
Small tools sampling inspection procedures: Part 10 Carbide tips and indexable inserts (first revision) |
PGD 32 |
| 132 |
IS 7778 : Part 11 : 2003 |
Small tools sampling inspection procedures: Part 11 Hard metal burrs (first revision) |
PGD 32 |
| 133 |
IS 12870 : 1989 |
Calcined clay pozzolana - Methods of of sampling |
CED 2 |
| 134 |
IS 269 : 2015 |
Ordinary portland cement - Specification (Sixth Revision) |
CED 2 |
| 135 |
IS 3535 : 1986 |
Methods Of Sampling Hydraulic Cement |
CED 2 |
| 136 |
IS 10058 : 1985 |
Specification For Forceps, Fixation, Graefe's Pattern (Modified) (First Revision) |
MHD 5 |
| 137 |
IS 10696 : 1983 |
Specification for round segment fused bifocal blanks |
MHD 5 |
| 138 |
IS 4569 : Part 1 : 1985 |
Specification for scissors, eye: Part 1 corneal (Second Revision) |
MHD 5 |
| 139 |
IS 4569 : Part 2 : 1985 |
Specification for scissors, eye: Part 2 conjuctival, blunt and sharp - Point scissors (Second Revision) |
MHD 5 |
| 140 |
IS 4569 : Part 3 : 1985 |
Specification for scissors, eye: part 3 scissors, tenotomy (Second Revision) |
MHD 5 |
| 141 |
IS 4569 : Part 4 : 1985 |
Specification For Scissors, Eye Part 4 Scissors,Enucleation (Second Revision) |
MHD 5 |
| 142 |
IS 4569 : Part 5 : 1985 |
Specification For Scissors, Eye Part 5 Scissors, Spring Action, Vanna's Pattern (Modified) (Second Revision) |
MHD 5 |
| 143 |
IS 4569 : Part 6 : 1985 |
Specification For Scissors, Eye Part 6 Scissors, Iris (Second Revision) |
MHD 5 |
| 144 |
IS 6420 : 1989 |
Eye Surgery Instruments - Retractor, Eye Lachrymal Sac, Muller's Pattern (Modified) - Specification (First Revision) |
MHD 5 |
| 145 |
IS 13049 : 1991 |
Diaphragm type (plastic body) float operated valves for cold water services - Specification |
CED 3 |
| 146 |
IS 12701 : 1996 |
Rotational moulded polyethylene water storage tanks - specification (First Revision) |
CED 3 |
| 147 |
IS 13114 : 1991 |
Forged brass gate, globe and check valves for water works purposes - Specification |
CED 3 |
| 148 |
IS 9700 : 1991 |
Activated alumina - Specification (First Revision) |
CHD 1 |
| 149 |
IS 11153 : 1996 |
Manganese dioxide for dry batteries - Specification (First Revision) |
CHD 1 |
| 150 |
IS 8771 : 1985 |
Specification For Needle Holder, Eye, Scissors And Forceps Combined, Castroviejo's Pattern (Modified) (First Revision) |
MHD 5 |
| 151 |
IS 8772 : 1985 |
Specification For Needle Holder, Eye, Barraquer's Pattern (Modified) (First Revision) |
MHD 5 |
| 152 |
IS 14932 : 2001 |
Sulfamic acid - Specification |
CHD 1 |
| 153 |
IS 8773 : 1985 |
Specification For Dissector, Lacrimal Sac, Lang's Pattern (Modified) (First Revision) |
MHD 5 |
| 154 |
IS 11673 : 1992 |
Sodium hypochlorite solution - Specification (First Revision) |
CHD 1 |
| 155 |
IS 8810 : 1985 |
Specification For Rougine For Lacrimal Sac, Rollet's Pattern (Modified) (First Revision) |
MHD 5 |
| 156 |
IS 9134 : 1987 |
Specification For Trephine, Corneal, Castroviejo's Pattern (Modified) (First Revision) |
MHD 5 |
| 157 |
IS 9329 : 1987 |
Specification For Speculum, Eye, Clark's Pattern (Modified) (First Revision) |
MHD 5 |
| 158 |
IS 9378 : 1987 |
Specification For Speculum, Eye, Castroviejo's Pattern (Modified) (First Revision) |
MHD 5 |
| 159 |
IS 13057 : 1991 |
Potassium iodate |
CHD 1 |
| 160 |
IS 13425 : 1992 |
Ammonium nitrate for nitrous oxide production - Specification |
CHD 1 |
| 161 |
IS 1726 : 1991 |
Cast iron manhole covers and frames - Specification (Third Revision) |
CED 3 |
| 162 |
IS 14212 : 1995 |
Sodium and potassium silicates - Method of test |
CHD 1 |
| 163 |
IS 1795 : 1982 |
Specification for pillar taps for water supply purposes (second revision) |
CED 3 |
| 164 |
IS 11566 : 1986 |
Specification for valve retractors |
MHD 6 |
| 165 |
IS 14211 : 1994 |
Molecular sieves - Specification |
CHD 1 |
| 166 |
IS 6395 : 1989 |
Thoracic Surgery Instruments - Clamps, Auricle, Crafoord's Pattern |
MHD 6 |
| 167 |
IS 6436 : 1989 |
Thoracic Surgery Instruments - Rib Spreader, Finochietto's Pattern, Adult Size |
MHD 6 |
| 168 |
IS 9424 : 1979 |
Specification for sodium metastlicate |
CHD 1 |
| 169 |
IS 6442 : 1989 |
Thoracic Surgery Instruments - Shears, Rib, Tudor Edward's Pattern for Posterior End of Ribs - Specification(First Revision) |
MHD 6 |
| 170 |
IS 6466 : 1989 |
Thoracic and cardiovascular surgery instruments - Needle holders - Specification (First Revision) |
MHD 6 |
| 171 |
IS 6467 : 1989 |
Thoracic Surgery Instruments - Periosteotome, Rib, Alexander's Pattern |
MHD 6 |
| 172 |
IS 10332 : 1982 |
Specification for hydrofluoric acid, aqueous |
CHD 1 |
| 173 |
IS 2692 : 1989 |
Ferrules for water services - specification (second revision) |
CED 3 |
| 174 |
IS 6468 : 1989 |
Thoracic Surgery Instruments - Trocar, Empyema, Nelson's Pattern |
MHD 6 |
| 175 |
IS 10271 : 1982 |
Specification for anhydrous hydrogen fluoride, technical |
CHD 1 |
| 176 |
IS 6777 : 1989 |
Thoracic and cardiovascular surgery instruments - Forceps, dissecting, lung - Specification (First Revision) |
MHD 6 |
| 177 |
IS 6780 : 1989 |
Thoracic Surgery Instruments - Forceps, Artery, Robert's Pattern, Curved on Flat |
MHD 6 |
| 178 |
IS 10535 : 1983 |
Specification for manganese sulphate, monohydrate |
CHD 1 |
| 179 |
IS 10895 : 1984 |
Specification for copper nitrate |
CHD 1 |
| 180 |
IS 6778 : 1989 |
Thoracic Surgery Instruments - Forceps, Lung, Duval's Pattern |
MHD 6 |
| 181 |
IS 11112 : 1984 |
SpecificatlOn for alumina, chromatographic grade |
CHD 1 |
| 182 |
IS 11305 : 1985 |
Specification for thionyl chloride |
CHD 1 |
| 183 |
IS 7355 : 1987 |
Spreader, Rib, Tuffier's Pattern, Adult Size |
MHD 6 |
| 184 |
IS 2083 : 1991 |
Flashlights - Specification (Second Revision) |
ETD 10 |
| 185 |
IS 7382 : 1987 |
Shears, Rib, Price Thomas' Pattern |
MHD 6 |
| 186 |
IS 7399 : 1987 |
Knife, Sternum, Lebsche's Pattern |
MHD 6 |
| 187 |
IS 7434 : 1987 |
Retractor, Scapula, Tudor Edward's Pattern |
MHD 6 |
| 188 |
IS 11236 : 1985 |
Specification for manganese acetate |
CHD 1 |
| 189 |
IS 11237 : 1985 |
Specification for manganese carbonate |
CHD 1 |
| 190 |
IS 7971 : 1987 |
Tourniquet, Cardiovascular Rumel-Belmont's Pattern |
MHD 6 |
| 191 |
IS 9398 : 1987 |
Specification for silicon tetrachloride, technical (First Revision) |
CHD 1 |
| 192 |
IS 6980 : 1983 |
Specification for tetrasodium pyrophosphate, anhydrous, technical (First Revision) |
CHD 1 |
| 193 |
IS 7130 : 1994 |
Chlorosulphontc acid,technical - Specification |
CHD 1 |
| 194 |
IS 8325 : 1983 |
Specification for nickel formate for nickel catalyst (First Revision) |
CHD 1 |
| 195 |
IS 8813 : 1995 |
Potassium silicate,technical specification (First Revision) |
CHD 1 |
| 196 |
IS 8814 : 1978 |
Specification for sodium metal |
CHD 1 |
| 197 |
IS 8883 : Part 1 : 2005 |
Methods of sampling chemical and chemical product: Part 1 general requirements and precautions (First Revision) |
CHD 1 |
| 198 |
IS 9140 : 1996 |
Methods for sampling of vitreous and fire clay sanitary appliances (Second Revision) |
CED 3 |
| 199 |
IS 9762 : 1994 |
Specification for polyethylene floats (Spherical) for float valves (first revision) |
CED 3 |
| 200 |
IS 9763 : 2000 |
Plastics bib taps, pillar taps, angle valves and stop valves for hot and cold water services - Specification (second revision) |
CED 3 |
| 201 |
IS 8345 : 1994 |
Cardiovascular surgery instruments - Clamps, bulldog, cross action type - Specification (First Revision) |
MHD 6 |
| 202 |
IS 8409 : 1991 |
Cardiovascular Surgery Instruments - Dilator, Valve, Tubb's Mitral Pattern |
MHD 6 |
| 203 |
IS 8549 : 1991 |
Cardiovascular surgery instruments - Angled scissors, potts smith pattern - Specification (First Revision) |
MHD 6 |
| 204 |
IS 13119 : 1991 |
Ammonium bifluoride - Specification |
CHD 13 |
| 205 |
IS 10286 : 2013 |
BLEACHING SYNTANS — SPECIFICATION |
CHD 17 |
| 206 |
IS 13022 : 1991 |
Enzyme bates (Alkaline) - specification |
CHD 17 |
| 207 |
IS 13625 : 2013 |
Retanning syntans including acrylic and related syntans - Specification (First Revision) |
CHD 17 |
| 208 |
IS 13606 : 2013 |
Synthetic sulphochlorinated fatliquors for leather processing - Specification (First Revision) |
CHD 17 |
| 209 |
IS 13527 : 2013 |
Replacement syntans - Specification (First Revision) |
CHD 17 |
| 210 |
IS 13024 : 2013 |
Syntans for prevention of sludge formation in vegetable tan liquor - Specification (First Revision) |
CHD 17 |
| 211 |
IS 13023 : 1991 |
Enzyme bates (Acidic) - Specification |
CHD 17 |
| 212 |
IS 2716 : 2013 |
Myrobalan extract - Specification (Second Revision) |
CHD 17 |
| 213 |
IS 2730 : 1977 |
Specification for magnesium sulphate (Epsom Salts) (First Revision) |
CHD 1 |
| 214 |
IS 2797 : 1998 |
Potassium bromide - Specification (Third Revision) |
CHD 1 |
| 215 |
IS 6301 : 2013 |
Basic chromium sulphate (For Tanning) - Specification (First Revision) |
CHD 17 |
| 216 |
IS 1919 : 1982 |
Specification for sodium hydrosulphite (First Revision) |
CHD 1 |
| 217 |
IS 6657 : 2013 |
Sal bark - Specification (First Revision) |
CHD 17 |
| 218 |
IS 7721 : 1986 |
Specification for chrome tanned leather laces for heavy duty footwear (First Revision) |
CHD 17 |
| 219 |
IS 1109 : 1980 |
Specification for borax (Second Revision) |
CHD 1 |
| 220 |
IS 877 : 1989 |
Activated carbons, powdered and granular - Methods of sampling and test (Second Revision) |
CHD 1 |
| 221 |
IS 11588 : 1986 |
Specification for beating board |
PGD 41 |
| 222 |
IS 5301 : 1987 |
Sodium Chlorate |
CHD 1 |
| 223 |
IS 11974 : 1987 |
Specification for badminton metallic racket frames |
PGD 41 |
| 224 |
IS 258 : 2000 |
Potash alum - Specification (Second Revision) |
CHD 1 |
| 225 |
IS 879 : 1981 |
Specification for sodium nitrite (First Revision) |
CHD 1 |
| 226 |
IS 3659 : 1993 |
Table tennis balls - Specification (First Revision) |
PGD 41 |
| 227 |
IS 1420 : 1989 |
Light basic magnesium carbonate - Specification (Second Revision) |
CHD 1 |
| 228 |
IS 1065 : 1989 |
Bleaching Powder, Stable |
CHD 1 |
| 229 |
IS 1078 : 1987 |
Specification for copper naphthenate (Second Revision) |
CHD 1 |
| 230 |
IS 11987 : 2013 |
Wax - Emulsion for leather finishing - Specification (First Revision) |
CHD 17 |
| 231 |
IS 9825 : 2003 |
Chlorine tablets - Specification (Second Revision) |
CHD 1 |
| 232 |
IS 11749 : 1986 |
Specification for manually operated toggle clips for leather industry |
CHD 17 |
| 233 |
IS 6186 : 1986 |
Specification for bentonite (First Revision) |
CHD 1 |
| 234 |
IS 9473 : 2002 |
Respiratory protective devices - Filtering half masks to protect against particles - Specification (First Revision) |
CHD 8 |
| 235 |
IS 9004 : 2013 |
Tamarind seed testa - Specification (First Revision) |
CHD 17 |
| 236 |
IS 417 : Part 2 : 1986 |
Specification for footballs, volleyballs, basketballs, netballs, throwballs and water - Polo balls: Part 2 volleyballs (Fourth Revision) |
PGD 41 |
| 237 |
IS 8863 : Part 1 : 1978 |
Leather sealing cups: Part 1 `U' cups |
CHD 17 |
| 238 |
IS 14166 : 1994 |
Respiratory Protective Devices Full - Face Masks - Specification |
CHD 8 |
| 239 |
IS 12437 : 1988 |
Specification for zirconium powder for use in explosive and pyrotechnic industry |
CHD 26 |
| 240 |
IS 12631 : 1989 |
Pyrotechnics - fireworks pencils - Specification |
CHD 26 |
| 241 |
IS 13227 : 1991 |
Fireworks whistles - Specification |
CHD 26 |
| 242 |
IS 12980 : 1990 |
Fireworks rockets - Specification |
CHD 26 |
| 243 |
IS 13524 : 1992 |
Potassium Perchlorate for Explosives and Pyrotechnic Compositions specification |
CHD 26 |
| 244 |
IS 13526 : 1992 |
Sodium perchlorate solution for explosives and pyrotechnic compositions - Specification |
CHD 26 |
| 245 |
IS 14784 : 2000 |
Fireworks signal flares - Specification |
CHD 26 |
| 246 |
IS 7886 : 1997 |
Barium chromate for explosives and pyrotechnic industry - Specification (First Revision) |
CHD 26 |
| 247 |
IS 7632 : 1975 |
Specification for detonators |
CHD 26 |
| 248 |
IS 7602 : 1975 |
Specification for lead chromate for explosive and pyrotechnic compositions |
CHD 26 |
| 249 |
IS 7738 : 1975 |
Specification for safety fuse for commercial use |
CHD 26 |
| 250 |
IS 8063 : 1976 |
Specification for red lead for explosive and pyrotechnic industry |
CHD 26 |
| 251 |
IS 9880 : 1981 |
Specification for wax - Coated paper splints |
CHD 26 |
| 252 |
IS 10821 : 1984 |
Specification for calcium nitrate for explosive industry |
CHD 26 |
| 253 |
IS 10977 : 1984 |
Specification for pentarythritol for explosive industry |
CHD 26 |
| 254 |
IS 2307 : 2004 |
Magnesium powder for explosive and pyrotechnic compositions - Specification (Second Revision) |
CHD 26 |
| 255 |
IS 438 : 2006 |
Aluminium powder for explosives and pyrotechnic compositions - Specification (Second Revision) |
CHD 26 |
| 256 |
IS 1091 : 1985 |
Specification for Nitrocellulose |
CHD 26 |
| 257 |
IS 15321 : 2003 |
Molten metal splash protective hoods - Specification |
TXD 32 |
| 258 |
IS 5127 : 2013 |
Babul bark - Specification (First Revision) |
CHD 17 |
| 259 |
IS 5670 : 1984 |
Specification for lead thiocyanate for explosive and pyrotechnic compositions (First Revision) |
CHD 26 |
| 260 |
IS 5128 : 2013 |
Avaram bark - Specification (First Revision) |
CHD 17 |
| 261 |
IS 5465 : 2013 |
Sonali bark - Specification (First Revision) |
CHD 17 |
| 262 |
IS 5671 : 1984 |
Specification for strontium nitrate for pyrotechnic compositions (First Revision) |
CHD 26 |
| 263 |
IS 5731 : 1970 |
Specification for antimony sulphide for explosive and pyrotechnic compositions |
CHD 26 |
| 264 |
IS 10126 : 1986 |
Specification for sparklers (First Revision) |
CHD 26 |
| 265 |
IS 11483 : 1985 |
Specification for amorces (Paper Caps For Toy Piston) |
CHD 26 |
| 266 |
IS 6199 : 2013 |
Wattle extract - Specification (First Revision) |
CHD 17 |
| 267 |
IS 3322 : Part 1 : 1987 |
Specification for water - Resistant clothing: Part 1 pvc - Coated fabrics (First Revision) |
TXD 33 |
| 268 |
IS 11491 : 1985 |
Specification for blasting soluble nitrocellulose for explosives industry |
CHD 26 |
| 269 |
IS 2789 : 1972 |
Specification for special proofed paulins (Tarpaulins) (First Revision) |
TXD 33 |
| 270 |
IS 11783 : 1986 |
Specification for ferrosilicon for explosive and pyrotechnic industry |
CHD 26 |
| 271 |
IS 8601 : 2013 |
Myrobalan nuts (Whole And Crushed) for tanning industry - Specification (First Revision) |
CHD 17 |
| 272 |
IS 2089 : 1977 |
Specificaiton for common proofed canvas/duck and paulins (Tarpaulins) (Second Revision) |
TXD 33 |
| 273 |
IS 2037 : 1986 |
Specification for tracing cloth (First Revision) |
TXD 33 |
| 274 |
IS 12632 : 1989 |
Pyrotechnics - Fireworks twinkling stars - Specification |
CHD 26 |
| 275 |
IS 12630 : 1989 |
Pyrotechnics - Fireworks black serpent pellets - Specification |
CHD 26 |
| 276 |
IS 12739 : 1989 |
Fireworks conical flowerpots - Specification |
CHD 26 |
| 277 |
IS 14931 : 2001 |
Fireworks wheel - Specification |
CHD 26 |
| 278 |
IS 1001 : 1991 |
Synthetic rubber proofed/coated fuel pump diaphragm fabric specification (First Revision) |
TXD 33 |
| 279 |
IS 15074 : Part 1 : 2002 |
Packaging of non - Electric detonators - Specification: Part 1 wooden cases |
CHD 26 |
| 280 |
IS 301 : 1982 |
Specification for potassium nitrate for explosive and pyrotechnic compositions (Second Revision) |
CHD 26 |
| 281 |
IS 4501 : 1981 |
SpeciflCation for aprons, rubberized, acid and alkali resistant (First Revsion) |
TXD 33 |
| 282 |
IS 10388 : 1982 |
Corrugated coir wood wool cement roofing sheets-Specification |
CED 13 |
| 283 |
IS 10555 : 2002 |
Exfoliated vermiculite - Specification (First Revision) |
CHD 27 |
| 284 |
IS 11433 : Part 1 : 1985 |
Specification for one part gun-grade polysulphide- based joints sealants Part 1 General requirements |
CED 13 |
| 285 |
IS 12118 : Part 1 : 1987 |
Specification for two - Part polysulphide - Based sealants: Part 1 general requirements |
CED 13 |
| 286 |
IS 6110 : 1983 |
Specification for double - Texture rubberised waterproof fabrics (Fourth Revision) |
TXD 33 |
| 287 |
IS 266 : 1993 |
Sulphuric acid - Specification (Third Revision) |
CHD 1 |
| 288 |
IS 6803 : 1972 |
Specification for special proofed canvas and duck |
TXD 33 |
| 289 |
IS 11239 : Part 13 : 1992 |
Methods - Of test for rigid cellular thermal insulation materials: Part 14 determination of flammability by oxygen index |
CHD 27 |
| 290 |
IS 11307 : 1985 |
Specification for cellular glass block and pipe thermal insulation |
CHD 27 |
| 291 |
IS 593 : 1978 |
Specification for salt for hide curing (Wet - Salting) (Second Revision) |
CHD 1 |
| 292 |
IS 15196 : 2002 |
Plastic footwear lasts - Specification |
CHD 19 |
| 293 |
IS 7554 : 2009 |
Toe puff and counter stiffener - Specification (First Revision) |
CHD 19 |
| 294 |
IS 12495 : 1988 |
SpecificatidN for potassium ferricyanide photographic grade |
CHD 5 |
| 295 |
IS 12496 : 1988 |
Sizes of film for industrial radiography |
CHD 5 |
| 296 |
IS 11001 : 1984 |
Specification for double centrifuged natural rubber latex |
PCD 13 |
| 297 |
IS 12517 : 1988 |
Specification for sizes of photographic film for graphic arts use |
CHD 5 |
| 298 |
IS 12533 : 1988 |
Specification for sizes of paper in rolls for phototypesetting and photolettering devices |
CHD 5 |
| 299 |
IS 12551 : 1988 |
Specification for potassium pyrophosphate for electroplating |
CHD 5 |
| 300 |
IS 12557 : 1988 |
Specification for sodium pyrophosphate for electroplating |
CHD 5 |
| 301 |
IS 12875 : 1989 |
Aluminium potassium sulphate (Potashalum), photographic grade - Specification |
CHD 5 |
| 302 |
IS 12865 : 1989 |
Potassium persulphate, photographic grade - Specification |
CHD 5 |
| 303 |
IS 13104 : 1991 |
2 - Amino - 5[N - Ethyl N - 2, hydroxy ethyl] aminotoluene sulphate,photographic grade (CD - 4) |
CHD 5 |
| 304 |
IS 13105 : 1991 |
2 - Amino - 5 - [N - Ethyl - N - (2 - Methane Sulphonamido Ethyl) ] aminotoluene, sesqui sulphate (Monohydrate), photographic grade (Cd - 3) |
CHD 5 |
| 305 |
IS 13106 : 1991 |
Potassium bromide, photographic grade |
CHD 5 |
| 306 |
IS 8737 : 2017 |
Valve fittings for use with liquefied petroleum gas (LPG) cylinders for more than 5 litre water capacity - Specification (Second Revision) |
MED 16 |
| 307 |
IS 13381 : 1992 |
Potassium carbonate, anhydrous and sesquihydrate, photographic grade specification |
CHD 5 |
| 308 |
IS 13443 : 1992 |
Methylene chloride for degreasing prior to electroplating - Specification |
CHD 5 |
| 309 |
IS 10666 : 2018 |
Tobacco and tobacco products - Cigarette filters - Specification (Second Revision) |
FAD 4 |
| 310 |
IS 13101 : 1991 |
Natural rubber latex, creamed, ammonia preserved - Specification |
PCD 13 |
| 311 |
IS 6678 : 1972 |
Specification for ammonium thiosulphate solution, photographic grade |
CHD 5 |
| 312 |
IS 15304 : 2003 |
Dipotassium hydrogen phosphate for electroplating - Specification |
CHD 5 |
| 313 |
IS 2211 : 1993 |
Anhy drous sodium thiosulphate, photographic grade - Specification . (Second Revision) |
CHD 5 |
| 314 |
IS 2214 : 1977 |
Specification for silver nitrate, pure and analytical reagent (First Revision) |
CHD 5 |
| 315 |
IS 2318 : 1980 |
Specification for silver nitrate, photographic grade (Second Revision) |
CHD 5 |
| 316 |
IS 4173 : 1975 |
Specification for 4 - Methylaminophenol sulphate (First Revision) |
CHD 5 |
| 317 |
IS 13466 : 1992 |
Brushes for electrical machines - Specification |
ETD 15 |
| 318 |
IS 5676 : 1995 |
Moulded solid rubber soles and heels - SpecificatlOn (Second Revision) |
CHD 19 |
| 319 |
IS 3598 : 1983 |
Specification for sodium perborate, tetrahydrate (First Revision) |
CHD 1 |
| 320 |
IS 6664 : 1992 |
Rubber microcellular sheets for soles and heels - Specification (First Revision) |
CHD 19 |
| 321 |
IS 6719 : 1972 |
Solid Pvc Soles And Heels |
CHD 19 |
| 322 |
IS 8606 : 1977 |
Specification brass screw wire for footwear |
CHD 19 |
| 323 |
IS 14912 : 2001 |
Door closers, concealed type (Hydraulically Regulated) - Specification |
CED 15 |
| 324 |
IS 3818 : 1992 |
Continuous (Piano) hinges -Specification |
CED 15 |
| 325 |
IS 453 : 1993 |
Double Acting Spring Hinges -Specification |
CED 15 |
| 326 |
IS 5599 : 1999 |
Rubber - Raw,naturaland synthetic - Methods for sampling and sample preparation (First Revision) |
PCD 29 |
| 327 |
IS 7498 : 1985 |
Methods of sampling and test for carbon black (First Revision) |
PCD 29 |
| 328 |
IS 12823 : 2015 |
Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision ) |
CED 20 |
| 329 |
IS 14276 : 2016 |
Cement bonded particle boards - Specification (First Revision) |
CED 20 |
| 330 |
IS 4408 : 1979 |
Specification for sodium chloride, analytical reagent (First Revision) |
CHD 1 |
| 331 |
IS 13893 : 1994 |
Polyurethane soles semirigid - specification |
CHD 19 |
| 332 |
IS 13145 : 2014 |
Spices and condiments - Methods of sampling (Second Revision) |
FAD 9 |
| 333 |
IS 10426 : 1983 |
Specification for public address amplifiers |
LITD 7 |
| 334 |
IS 15476 : 2004 |
Bamboo mat corrugated sheets - specification |
CED 20 |
| 335 |
IS 15491 : 2004 |
Medium density coirboards for general purposes - specification |
CED 20 |
| 336 |
IS 10662 : 1992 |
Receivers for colour television broadcast transmissions specification (First Revision) |
LITD 7 |
| 337 |
IS 15786 : 2008 |
Prelaminated cement bonded particle board - Specification |
CED 20 |
| 338 |
IS 15972 : 2012 |
Bamboo - Jute composite corrugated and semi - Corrugated sheets - Specification |
CED 20 |
| 339 |
IS 3087 : 2005 |
Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification |
CED 20 |
| 340 |
IS 10896 : 1984 |
Specification for aluminium hydroxide, technical |
CHD 1 |
| 341 |
IS 10904 : 1984 |
Specification for sodium fluoride, technical |
CHD 1 |
| 342 |
IS 12292 : 1988 |
Specification for lead suboxide (Lead Oxide) for lead - Acid storage battery |
CHD 1 |
| 343 |
IS 10840 : 1994 |
Blow moulded HDPE containers for packing of vanaspati - Specification (Second Revision) |
PCD 21 |
| 344 |
IS 1288 : 1982 |
Methods of test for mineral gypsum (Second Revision) |
CHD 1 |
| 345 |
IS 2051 : 1976 |
Method for sampling of leather footwear (First Reuision) |
CHD 19 |
| 346 |
IS 6507 : 1991 |
Sodium chromate,tetrahydrate specification (Second Revision) |
CHD 1 |
| 347 |
IS 4512 : 1978 |
Specification for footwear lasts, wooden (First Revision) |
CHD 19 |
| 348 |
IS 299 : 2012 |
Alumino - Ferric - Specification (Fifth Revision) |
CHD 1 |
| 349 |
IS 264 : 2005 |
Nitric acid - Specification (Third Revision) |
CHD 1 |
| 350 |
IS 11805 : 2007 |
Polyethylene pouches for packaging liquid milk - Specification (Second Revision) |
PCD 21 |
| 351 |
IS 7402 : 2011 |
Ceramic water purifier filter candles - Specification (Second Revision) |
FAD 30 |
| 352 |
IS 3097 : 2006 |
Veneered Particle Boards -Specification |
CED 20 |
| 353 |
IS 12787 : 1989 |
Polyethylene air bubble film - Specification |
PCD 21 |
| 354 |
IS 3129 : 1985 |
Specification for low density particle boards |
CED 20 |
| 355 |
IS 12887 : 1989 |
Polyethylene terephthalate (PET) bottles for packaging of edible oils - Specification |
PCD 21 |
| 356 |
IS 13123 : 2000 |
Packing of liquid pesticides - Polyethylene terephthalate (PET) bottles (Up To 5 Litres Capacity) - Specification (First Revision) |
PCD 21 |
| 357 |
IS 7775 : 1975 |
Specification for ceramic grinding media and lining |
CHD 9 |
| 358 |
IS 14537 : 1998 |
Polyethylene terephthalate (PET) bottles for packaging of alcoholic liquors - Specification |
PCD 21 |
| 359 |
IS 14625 : 2015 |
Plastics Feeding Bottles (First Revision) |
PCD 21 |
| 360 |
IS 14625 : 1999 |
Plastics Feeding Bottles (Bilingual) |
PCD 21 |
| 361 |
IS 14764 : 2000 |
Polyethylene terephthalate (PET) containers for packaging of vanaspati - specification |
PCD 21 |
| 362 |
IS 15410 : 2003 |
Containers for packaging of natural mineral water and packaged drinking water - Specification |
PCD 21 |
| 363 |
IS 5201 : 1969 |
Methods for sampling of abrasive emery grain |
PGD 9 |
| 364 |
IS 15473 : 2004 |
Blow moulded HDPE containers for packaging of edible oils - Specification |
PCD 21 |
| 365 |
IS 15532 : 2004 |
Plastics crates for fruits and vegetables - Specification |
PCD 21 |
| 366 |
IS 15609 : 2005 |
Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification |
PCD 21 |
| 367 |
IS 5520 : 1969 |
Specification for wooden lasts for heavy - Duty boots |
CHD 19 |
| 368 |
IS 6312 : 1994 |
Polyethylene containers for the transport of materials - Specification (Second Revision) |
PCD 21 |
| 369 |
IS 6053 : Part 4 : 1972 |
Specification for hand tools for footwear industry: Part 4 half round knife |
CHD 19 |
| 370 |
IS 6053 : Part 5 : 1972 |
Specification for hand tools for footwear industry: Part 5 straight hacking knife |
CHD 19 |
| 371 |
IS 6368 : 1971 |
Methods for sampling of rubber and rubber combination footwear |
CHD 19 |
| 372 |
IS 7329 : 1974 |
Specification for metal lasts for safety rubber - Canvas ankle boots |
CHD 19 |
| 373 |
IS 8060 : 1976 |
Specification for heel - Tip and toe - Tip with nails for footwear |
CHD 19 |
| 374 |
IS 8688 : 1988 |
Plastics bottles for potable water - Specification (Second Revision) |
PCD 21 |
| 375 |
IS 12431 : 1988 |
Helical - Scan video tape cassette system using 12.65 mm (0.5 In) magnetic tape on type VHS |
LITD 7 |
| 376 |
IS 5379 : 1969 |
Ammonium thiosulphate, photographic grade |
CHD 5 |
| 377 |
IS 6155 : 1987 |
Specification for sodium carbonate, monohydrate, photographic grade (First Revision) |
CHD 5 |
| 378 |
IS 388 : 1999 |
Hydroqui5, photographic grade - Specification (Third Revision) |
CHD 5 |
| 379 |
IS 13965 : 1994 |
Coconut monoethanolamide for cosmetic industry - Specification |
PCD 19 |
| 380 |
IS 263 : 1990 |
Boric acid for cosmetic industry specification (Fifth Revision) |
PCD 19 |
| 381 |
IS 3987 : 2006 |
Sorbitol solution (70 Percent) for cosmetic industry - Specification (Third Revision) |
PCD 19 |
| 382 |
IS 9978 : 1991 |
Tendu leaf - Specification (First Revision) |
FAD 4 |
| 383 |
IS 7316 : 1974 |
Specification for decorative plywood using plurality of veneers for decorative faces |
CED 20 |
| 384 |
IS 10089 : 1981 |
Specification for metal lasts for knee boots |
CHD 19 |
| 385 |
IS 7101 : 1994 |
Coconut diethanolamide for cosmetic industry - Specification (Second Revision) |
PCD 19 |
| 386 |
IS 13528 : 2013 |
Pretanning syntans - Specification (First Revision) |
CHD 17 |
| 387 |
IS 7087 : 1979 |
Specification for ceramic tower packings (First Revision) |
CHD 9 |
| 388 |
IS 557 : 1988 |
Specificationfor sodium acetate, photographic grade (Third Revision) |
CHD 5 |
| 389 |
IS 5868 : 1983 |
Method of sampling for leather (First Revision) |
CHD 17 |
| 390 |
IS 5380 : 1976 |
Specification for sodium bromide, photographic grade (First Revision) |
CHD 5 |
| 391 |
IS 5761 : Part 1 : 1984 |
Specification for gold cyanide and gold potassium cyanide for electroplating: Part 1 for commercial/engineering applications (First Revision) |
CHD 5 |
| 392 |
IS 12928 : 1990 |
Precipitated barium carbonate for ceramic and glass industry - Specification |
CHD 10 |
| 393 |
IS 14179 : 1999 |
Methods of test for ceramic tableware |
CHD 9 |
| 394 |
IS 15752 : 2007 |
Sericite for ceramic industry - Specification |
CHD 9 |
| 395 |
IS 11477 : 2011 |
Pyrophyllite for ceramic industry - Specification (First Revision) |
CHD 9 |
| 396 |
IS 11643 : 1985 |
Specification for silicon carbide for bonded abrasive products |
PGD 9 |
| 397 |
IS 11603 : 1986 |
Specification for ammonium thiocyanate, photographic grade |
CHD 5 |
| 398 |
IS 10668 : 1983 |
Specification for sodium formaldehyde bisulphite, anhydrous, photographic grade |
CHD 5 |
| 399 |
IS 11752 : 1986 |
Specification for sodium metabisulphite, photographic grade |
CHD 5 |
| 400 |
IS 11788 : 1986 |
Specification for 2 - Amino - 5 - Diethylaminotoluene hydrochloride, photographic grade |
CHD 5 |
| 401 |
IS 12121 : 1987 |
Specification for sodium carbonate, anhydrous, photographic grade |
CHD 5 |
| 402 |
IS 12125 : 1987 |
Specification for benzotriazole, photographic grade |
CHD 5 |
| 403 |
IS 9343 : 1979 |
1-phenyl-3-pyrazolidone, photographic grade |
CHD 5 |
| 404 |
IS 9923 : 1981 |
Specification for palladium salts for electroplating |
CHD 5 |
| 405 |
IS 10246 : 1982 |
Specification for N, N - Diethyl - P - Phenylene diamine sulphate, photographic grade |
CHD 5 |
| 406 |
IS 10438 : 1983 |
Specification for potassium sulphite, 650 g/1 aqueous solution for photographic industry |
CHD 5 |
| 407 |
IS 5068 : 1969 |
Specification for grab hook |
PGD 34 |
| 408 |
IS 11484 : 1985 |
Specification for phenol sulphonic acid for electroplating |
CHD 5 |
| 409 |
IS 5098 : 1969 |
Specification for cross - Cut and rip saws |
PGD 34 |
| 410 |
IS 1809 : 1979 |
Specification for nickel salts for electroplating (Second Revision) |
CHD 5 |
| 411 |
IS 6588 : 1972 |
Specification for gold chloride (Chloroauric Acid) |
CHD 5 |
| 412 |
IS 7038 : 1973 |
Specification for chloroplatinic acid (Platinum Chloride) |
CHD 5 |
| 413 |
IS 7067 : 1973 |
Specification for fluoboric acid and metal fluoborates for electroplating |
CHD 5 |
| 414 |
IS 8281 : 1976 |
Specification for hydroxylamine sulphate, photographic grade |
CHD 5 |
| 415 |
IS 9341 : 1979 |
Specification for sulphamic acid for electroplating |
CHD 5 |
| 416 |
IS 9342 : 1987 |
Specification for sodium hypophosphite for electroless plating (First Revision) |
CHD 5 |
| 417 |
IS 6358 : 1971 |
Specification for potassium and sodium cyanides for electroplating |
CHD 5 |
| 418 |
IS 6267 : 1971 |
Specification for silver cyanide and silver potassium cyanide for electroplating |
CHD 5 |
| 419 |
IS 15275 : 2003 |
Padlocks - Specification |
MED 33 |
| 420 |
IS 5991 : 1971 |
Specification for ballast rakes |
PGD 34 |
| 421 |
IS 11350 : 1985 |
Methods for sampling of medulated raw wool |
TXD 1 |
| 422 |
IS 6007 : 1971 |
Specification for pipe vices (Hinged Type) |
PGD 34 |
| 423 |
IS 6087 : 1971 |
Specification for metal cutting shears |
PGD 34 |
| 424 |
IS 6917 : 1973 |
Specification for glass lenses for automobile headlights (Replaceable Bulb Type) |
CHD 10 |
| 425 |
IS 6981 : 1992 |
Glass jars fqr air - Depolarized primary (Caustic Soda) wet cells - Specification (First Revision) |
CHD 10 |
| 426 |
IS 2712 : 1998 |
Gaskets and packings - Compressed asbestos fibre jointing - Specification (Third Revision) |
MED 30 |
| 427 |
IS 14207 : 1994 |
Household sewing machines - Open type shuttle race sub - Assembly - Specification |
MED 29 |
| 428 |
IS 13972 : 1994 |
Household sewing machines - Bobbin winder assembly - Specification |
MED 29 |
| 429 |
IS 13872 : 1993 |
Household sewing machine - Stitch regulators - Specification |
MED 29 |
| 430 |
IS 537 : 2011 |
Toluene - Specification (Second Revision) |
PCD 3 |
| 431 |
IS 13825 : 1993 |
Household sewing machines - Arm shaft front bush - Specification |
MED 29 |
| 432 |
IS 13806 : 1993 |
Household sewing machine - Closed type shuttle race assembly - Specification |
MED 29 |
| 433 |
IS 13192 : 1991 |
Household sewing machines - Hand attachment assembly |
MED 29 |
| 434 |
IS 13120 : 1991 |
Household sewing machines - Flywheel bush - Specification |
MED 29 |
| 435 |
IS 10621 : 1983 |
Specification for jelebi mix |
FAD 24 |
| 436 |
IS 12798 : 1989 |
Household sewing machines - Flywheels - Specification |
MED 29 |
| 437 |
IS 11347 : 1995 |
Household sewing machtnes - Shuttle driver - Specification (First Revision) |
MED 29 |
| 438 |
IS 11280 : 1996 |
Household sewing machines - Feed bars - Specification (First Revision) |
MED 29 |
| 439 |
IS 4341 : 1997 |
Household sewing machines - Feed bar rollers and studs - Specification (First Revision) |
MED 29 |
| 440 |
IS 4339 : 1997 |
Household sewing machines - Needle bar link studs - Specification (First Revision) |
MED 29 |
| 441 |
IS 4338 : 1991 |
Household sewing machines vertical oscillating shuttle - Specification f second revision) |
MED 29 |
| 442 |
IS 6213 : Part 17 : 1978 |
Methods of test for pulp: Part 17 determination of saleable mass of pulp |
CHD 15 |
| 443 |
IS 4188 : 1996 |
Household sewing machines - Oscillating shaft - Specification (First Revision) |
MED 29 |
| 444 |
IS 3817 : 1991 |
Household sewing machines - Arm shaft - Specification (First Revision) |
MED 29 |
| 445 |
IS 12868 : 1989 |
Glass aerosol containers - Specification |
CHD 10 |
| 446 |
IS 3375 : 1991 |
Household sewing machines - Bobbin case - Specification (Second Revision) |
MED 29 |
| 447 |
IS 9157 : 1979 |
Specification for sodium nitrate and potassium nitrate for glass compositions |
CHD 10 |
| 448 |
IS 9425 : 1980 |
Specification for selenium for glass compositions |
CHD 10 |
| 449 |
IS 1297 : 1991 |
Household sewing machines presser bar - Specification (Third Revision) |
MED 29 |
| 450 |
IS 1295 : 1990 |
Household sewing machines - Needle bar - Specification (Second Revision) |
MED 29 |
| 451 |
IS 1112 : Part 1 : 1989 |
Glass shells for general lighting service lamps: Part 1 - 60 to 80 mm shell diameter (Second Revision) |
CHD 10 |
| 452 |
IS 1112 : Part 2 : 1989 |
Glass shells for general lighting service lamps - Specification: Part 2 81 to 130 mm shell diameter (Second Revision) |
CHD 10 |
| 453 |
IS 1392 : 1999 |
Glass milk bottles - Specification (Fourth Revision) |
CHD 10 |
| 454 |
IS 8113 : 1976 |
Specification for primary cartons for packaging butter |
CHD 16 |
| 455 |
IS 1662 : 1974 |
Specification for glass liquor bottles (Second Revision) |
CHD 10 |
| 456 |
IS 1975 : 1984 |
Specification for signal roundels and lenses for use in railways (First Revision) |
CHD 10 |
| 457 |
IS 1158 : 1973 |
Specification for corn flakes (First Revision) |
FAD 24 |
| 458 |
IS 12566 : 1989 |
Ready-to-eat extruded snacks - Specification |
FAD 24 |
| 459 |
IS 12569 : 1989 |
Potato french fries - Specification |
FAD 24 |
| 460 |
IS 12574 : 1989 |
Fried banana chips - Specification |
FAD 24 |
| 461 |
IS 12575 : 2010 |
Fried potato chips - Specification (First Revision) |
FAD 24 |
| 462 |
IS 9032 : 1978 |
Specification for diazo sensitized paper |
CHD 15 |
| 463 |
IS 12741 : 1989 |
Bakery products - Methods of sampling |
FAD 24 |
| 464 |
IS 13717 : 1993 |
Textiles – Polyester cotton blended khadi (Polyvastra) suitings for uniform – Specification |
TXD 8 |
| 465 |
IS 9033 : 1978 |
Specification for reproduction tracing paper |
CHD 15 |
| 466 |
IS 10982 : 1984 |
Specification for strontium sulphate for electroplating |
CHD 5 |
| 467 |
IS 12519 : 1988 |
Specification for zinc pyrophosphate for electroplating |
CHD 5 |
| 468 |
IS 12925 : 1990 |
Ferric ammonium edta solution photographic grade - Specification |
CHD 5 |
| 469 |
IS 13272 : 1992 |
Woven lace and knit curtain and drapery fabrics made of man-made fibres and their blends – Specification |
TXD 31 |
| 470 |
IS 13014 : 1990 |
Sodium gluconate for electroplating - Specification |
CHD 5 |
| 471 |
IS 12895 : 1990 |
Alga spirulina, food grade - Specification |
FAD 24 |
| 472 |
IS 1880 : 1977 |
Specification for zinc oxide and zinc salts for electroplating (First Revision) |
CHD 5 |
| 473 |
IS 13264 : 1991 |
Ready khichdi mix - Specification |
FAD 24 |
| 474 |
IS 171 : 1993 |
Textiles – Ring spun grey cotton yarn for weaving – Specification (fourth revision) |
TXD 31 |
| 475 |
IS 13683 : 2006 |
Textiles – Ring spun grey cotton yarn – Specification (first revision) |
TXD 31 |
| 476 |
IS 488 : 1980 |
Specification for glass making sands (Second Revision) |
CHD 10 |
| 477 |
IS 15798 : 2007 |
Textiles - Requirements for labelling and marking of consumer textiles - Specification |
TXD 31 |
| 478 |
IS 13206 : 1991 |
Gallic acid for ink industry - Specification |
CHD 14 |
| 479 |
IS 2618 : 2016 |
Laboratory glassware - Test tubes (Third Revision) |
CHD 10 |
| 480 |
IS 13209 : 1991 |
Indelible ink - Specification |
CHD 14 |
| 481 |
IS 10142 : 1999 |
Polystyrene (crystal and high impact) for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification (First Revision) |
PCD 12 |
| 482 |
IS 13299 : 1992 |
Balls for ball point pen refills specification |
CHD 14 |
| 483 |
IS 5086 : 1993 |
Stencil paper - Specification (Second Revision) |
CHD 14 |
| 484 |
IS 12412 : 1988 |
Specification for screw driver bits for the use with ratchet screw drivers: Part 2 for cross recessed head screws |
PGD 34 |
| 485 |
IS 12413 : 1988 |
Specification for wooden jointer for two - Men cross cut saws |
PGD 34 |
| 486 |
IS 1551 : 1991 |
Carbon papers - Typewriters - Specification (Second Revision) |
CHD 14 |
| 487 |
IS 9543 : 2015 |
Textiles – Spun polyester sewing threads – Specification (first revision) |
TXD 31 |
| 488 |
IS 2837 : Part 1 : 1975 |
Specification for porcelain crucibles and basins: Part 1 crucibles (First Revision) |
CHD 10 |
| 489 |
IS 1222 : 1992 |
Ink, duplicating, for twin cylinder rotary machines - Specification (Third Revision) |
CHD 14 |
| 490 |
IS 2837 : Part 2 : 1977 |
Specification for porcelain crucibles and basins: Part 2 basins (First Revision) |
CHD 10 |
| 491 |
IS 10889 : 2004 |
High density polyethylene films (First Revision) |
PCD 12 |
| 492 |
IS 8100 : 1976 |
Specification for water colours for students |
CHD 14 |
| 493 |
IS 13208 : 1991 |
Tannic acid for ink industry - Specification |
CHD 14 |
| 494 |
IS 4174 : 1977 |
Specification for typewriter ribbons, cotton (First Revision) |
CHD 14 |
| 495 |
IS 9128 : 1999 |
Heavy duty dry batteries |
ETD 10 |
| 496 |
IS 7866 : 1993 |
Textiles – Ring spun polyester blended grey yarn – Specification (first revision) |
TXD 31 |
| 497 |
IS 3707 : 1984 |
Specification for refill, ball point pen (Second Revision) |
CHD 14 |
| 498 |
IS 8101 : 1976 |
Specification for poster colours |
CHD 14 |
| 499 |
IS 8277 : 1976 |
Specification for water based recorder inks |
CHD 14 |
| 500 |
IS 1440 : 1980 |
Specification for ink, metal stamp, black (First Revision) |
CHD 14 |
| 501 |
IS 788 : 1971 |
Specification for ink,drawing, waterproof, coloured (First Revision) |
CHD 14 |
| 502 |
IS 11988 : 1986 |
Specification for hot seal patches |
PCD 12 |
| 503 |
IS 9055 : 1979 |
Specification for one time carbon paper |
CHD 14 |
| 504 |
IS 10584 : Part 1 : 1983 |
Glass marking pencils: Part 1 With wooden casing |
CHD 14 |
| 505 |
IS 10584 : Part 2 : 1983 |
Specification for glass - Marking pencils: Part 2 with spiral paper - Form casing |
CHD 14 |
| 506 |
IS 11259 : 1985 |
Specification for ink, numbering |
CHD 14 |
| 507 |
IS 12994 : 1990 |
Epoxy adhesives, room temperature curing, general purpose - Specification |
PCD 12 |
| 508 |
IS 11992 : 1986 |
Specification for correction fluid for concealing typed errors |
CHD 14 |
| 509 |
IS 1300 : 1994 |
Phenolic moulding materials - Specification (Third Revision) |
PCD 12 |
| 510 |
IS 13193 : 1992 |
Polyalkylene terephthalates (pet and pbt) for moulding and extrusion - Specification |
PCD 12 |
| 511 |
IS 302 : Part 2 : Sec 80 : 2017 |
Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision) |
ETD 32 |
| 512 |
IS 3104 : Part 1 : 1982 |
Specification for density hydrometers: Part 1 requirements (First Revision) |
CHD 10 |
| 513 |
IS 13410 : 1992 |
Glass reinforced polyester sheet moulding compounds(smc) - Specification |
PCD 12 |
| 514 |
IS 3608 : Part 1 : 1987 |
Specification for glass alcoholometers: Part 1 glass alcoholometers without thermometer (First Revision) |
CHD 10 |
| 515 |
IS 13411 : 1992 |
Glass reinforced polyester dough moulding compounds - Specification |
PCD 12 |
| 516 |
IS 3608 : Part 2 : 1987 |
Specification for glass alcoholometers: Part 2 glass alcoholometers with thermometer (Thermo - Alcoholometers) (First Revision) |
CHD 10 |
| 517 |
IS 13719 : 1993 |
Textiles – Ring spun cotton regenerated cellulosic fibre blended grey yarn – Specification |
TXD 31 |
| 518 |
IS 13464 : 1992 |
Polyamide (nylon 66) materials for moulding and extrusion - Specification |
PCD 12 |
| 519 |
IS 15336 : 2003 |
Textiles - Acrylic yarn for hosiery - Specification |
TXD 31 |
| 520 |
IS 13576 : 1992 |
Ethylene methacrylic acid (emaa) copolymers and terpolymers for their safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification |
PCD 12 |
| 521 |
IS 13601 : 1993 |
Ethylene vinyl acetate (eva) copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification |
PCD 12 |
| 522 |
IS 8643 : 1977 |
Specification for dye, methyl violet, for stamp - Pad ink |
CHD 14 |
| 523 |
IS 5805 : 1993 |
Ink, ball point pen refill - Specification (First Revision) |
CHD 14 |
| 524 |
IS 13960 : 1994 |
Thermoplastic strappings - Specification |
PCD 12 |
| 525 |
IS 10528 : 1983 |
Method of sampling empty paper sacks for testing |
CHD 16 |
| 526 |
IS 220 : 1988 |
Fountain pen ink - Ferro - Gallo tannate (0.1 Percent Iron Content) specification (Third Revision) |
CHD 14 |
| 527 |
IS B4175 : 1981 |
Correcting Fluid (bi-lingual) |
CHD 14 |
| 528 |
IS 11306 : 1985 |
Teleprinter ribbon, cotton |
CHD 14 |
| 529 |
IS 14443 : 1997 |
Polycarbonate sheets - Specification |
PCD 12 |
| 530 |
IS 14500 : 1998 |
Linear low-density polyethylene (lldpe) films - Specification |
PCD 12 |
| 531 |
IS 10562 : 1983 |
Sketch pen, fibre-tip |
CHD 14 |
| 532 |
IS 4426 : 1992 |
Methods of sampling Laboratory glassware (First Revision) |
CHD 10 |
| 533 |
IS 14611 : 2016 |
Multilayered cross laminated sheets/tarpaulins/covers/agricultural films - Specification (First Revision) |
PCD 12 |
| 534 |
IS 1484 : 1974 |
Specification for rolled oats (Quick - Cooking Type) (First Revision) |
FAD 24 |
| 535 |
IS 14635 : 1999 |
Polytetrafluoroethylene (Ptfe) materials for moulding and extrusion - Specification |
PCD 12 |
| 536 |
IS 12715 : 1989 |
Polyvinyl alcohol for sizing of paper - Specification |
CHD 15 |
| 537 |
IS 15271 : 2003 |
Namkeen - Specification |
FAD 24 |
| 538 |
IS 5081 : 1990 |
Glass tubes for tubular fluorescent lamps for general lighting service - Specification (First Revision) |
CHD 10 |
| 539 |
IS 14752 : 2000 |
Melamine formaldehyde resins to improve wet strength of paper - Specification |
PCD 12 |
| 540 |
IS 14753 : 1999 |
Polymethyl methacrylate (pmma) (acrylic) sheets |
PCD 12 |
| 541 |
IS 14995 : 2001 |
Stretch cling films - Specification |
PCD 12 |
| 542 |
IS 15307 : 2003 |
Post card - Specification |
CHD 15 |
| 543 |
IS 13892 : 1999 |
Correspondence Envelopes |
CHD 15 |
| 544 |
IS 14997 : 2001 |
Modified poly (phenylene oxide) (ppo) resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification |
PCD 12 |
| 545 |
IS 14999 : 2001 |
Melamine-formaldehyde resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification |
PCD 12 |
| 546 |
IS 15621 : 2005 |
Tetrabromobisphenol-a - Specification |
PCD 12 |
| 547 |
IS 15623 : 2005 |
Melamine (2, 4, 6 triamino 1, 3, 5 triazine) - Specification |
PCD 12 |
| 548 |
IS 13467 : 1992 |
Chlorinated rubber for paints - Specification |
CHD 21 |
| 549 |
IS 2257 : 1989 |
Paper adhesives, liquid gum and office paste type - Specification (Third Revision) |
PCD 12 |
| 550 |
IS 7708 : 1975 |
Specification for vacuum flasks |
CHD 10 |
| 551 |
IS 4662 : 1977 |
Methods for sampling of starches and starch products (First Revision) |
FAD 16 |
| 552 |
IS 3447 : 1993 |
Shellac jointing compound - Specification (First Revision) |
PCD 12 |
| 553 |
IS 6287 : 1985 |
Methods of sampling and analysis for sugar confectionery (First Revision) |
FAD 24 |
| 554 |
IS 5210 : 1995 |
High impact polystyrene sheet - Specification (First Revision) |
PCD 12 |
| 555 |
IS 5378 : 1994 |
Polyethylene cane - Specification (First Revision) |
PCD 12 |
| 556 |
IS 3493 : 1978 |
Methods of sampling and test for organic pigments for paints (First Revision) |
CHD 21 |
| 557 |
IS 9766 : 1992 |
Flexible pvc compounds - Specification (First Revision) |
PCD 12 |
| 558 |
IS 354 : Part 1 : 1987 |
Methods of sampling and test for resins for paints: Part 1 General test methods (Second Revision) |
CHD 21 |
| 559 |
IS 13966 : 1994 |
Sodium carboxymethyl cellulose for use in oil industry - Specification |
CHD 21 |
| 560 |
IS 501 : 1976 |
Specification for oxalic acid, technical and analytical reagent (Second Revision) |
PCD 9 |
| 561 |
IS 3321 : 1973 |
Specification for formaldehyde solution (First Revision) |
PCD 9 |
| 562 |
IS 5158 : 1987 |
Specification for phthalic anhydride, technical (Second Revision) |
PCD 9 |
| 563 |
IS 5271 : 1984 |
Specification for paraformaldehyde (First Revision) |
PCD 9 |
| 564 |
IS 5992 : 1970 |
Specification for p - Dichlorobenzene, technical |
PCD 9 |
| 565 |
IS 6712 : 2003 |
o - Dichlorobenzene - Specification (First Revision) |
PCD 9 |
| 566 |
IS 9708 : 1993 |
Stockbridge vibration dampers for overhead power lines - Specification (First Revision) |
ETD 37 |
| 567 |
IS 4547 : 1992 |
Receivers for monochrome television broadcast transmissions - Specificaiton (Third Revision) |
LITD 7 |
| 568 |
IS 6768 : 1973 |
Specification for m - Aminophenol |
PCD 26 |
| 569 |
IS 6971 : 1998 |
2 - Ethyl hexan - 1 - Ol - Specification (First Revision) |
PCD 9 |
| 570 |
IS 7220 : 1974 |
Specification for ethylenediaminetetra - Acetic acid, pure and technical |
PCD 9 |
| 571 |
IS 7559 : 1992 |
Salicylic acid, technical - Specification (First Revision) |
PCD 9 |
| 572 |
IS 7618 : 1974 |
Specification for hexachloroethane |
PCD 9 |
| 573 |
IS 7901 : 1975 |
Specification for triethanolamine, technical |
PCD 9 |
| 574 |
IS 7910 : 2003 |
Monoethanolamine - Specification (First Revision) |
PCD 9 |
| 575 |
IS 7918 : 2001 |
Diethylene glycol - Specification (First Revision) |
PCD 9 |
| 576 |
IS 10065 : 1981 |
Specification for roasted groundnut (Peanut) kernels |
FAD 16 |
| 577 |
IS 9031 : 1992 |
Teleprinter paper page rolls - Specificaiton (First Revision) |
CHD 15 |
| 578 |
IS 8873 : 1977 |
Specification for monomethylamine, technical |
PCD 9 |
| 579 |
IS 9207 : 1979 |
Specification for Di - tet - butyl - para - cresol, tecnical |
PCD 9 |
| 580 |
IS 9250 : 1979 |
Specification for p - Nitrophenol |
PCD 9 |
| 581 |
IS 10745 : 1983 |
Specification for acetophenone |
PCD 9 |
| 582 |
IS 12277 : 1988 |
Specification for polyethylene glycol 400 |
PCD 9 |
| 583 |
IS 12438 : 1988 |
Specification for dimethyl terephthalate |
PCD 9 |
| 584 |
IS 13322 : 1992 |
Furfural, technical - Specification |
PCD 9 |
| 585 |
IS 13359 : 1992 |
Polyethylene glycol 200 - Specification |
PCD 9 |
| 586 |
IS 14310 : 1995 |
Glyoxal (40 percent solution) - Specification |
PCD 9 |
| 587 |
IS 13475 : 1992 |
Sodium formate - Specification |
PCD 9 |
| 588 |
IS 14375 : 1996 |
Cyclohexanone - Specification |
PCD 9 |
| 589 |
IS 14707 : 1999 |
Methyl acrylate - Specification |
PCD 9 |
| 590 |
IS 14708 : 1999 |
Ethyl acrylate - Specification |
PCD 9 |
| 591 |
IS 14709 : 1999 |
n - Butyl acrylate - Specification |
PCD 9 |
| 592 |
IS 15356 : 2003 |
Acetaldehyde - Specification |
PCD 9 |
| 593 |
IS 13904 : 1993 |
Textiles - Serge, drab, polyester - Wool blended - Specification |
TXD 4 |
| 594 |
IS 14710 : 1999 |
Meta - Cresol - Specification |
PCD 9 |
| 595 |
IS 16112 : 2013 |
Beta picoline - Specification |
PCD 9 |
| 596 |
IS 16113 : 2013 |
Gamma picoline - Specification |
PCD 9 |
| 597 |
IS 16114 : 2013 |
3 - Cyanopyridine - Specification |
PCD 9 |
| 598 |
IS 9686 : 1980 |
Specification for elastic tape |
TXD 39 |
| 599 |
IS 539 : 1974 |
Specification for naphthalene (Second Revision) |
PCD 9 |
| 600 |
IS 7135 : 1987 |
Specification for dimethyl sulphate, technical (First Revision) |
PCD 9 |
| 601 |
IS 16 : Part 1 : 2008 |
Shellac - Specification: Part 1 hand-made shellac (Fourth Revision) |
CHD 23 |
| 602 |
IS 1746 : 1992 |
Shoe polish, paste - Specification (Third Revision) |
CHD 23 |
| 603 |
IS 7911 : 2000 |
Diethanolamine - Specification (First Revision) |
PCD 9 |
| 604 |
IS 6045 : 1994 |
Wax - Emulsion sole leather polish - Specification (First Revision) |
CHD 23 |
| 605 |
IS 6350 : 1985 |
Specification for shoe cream (First Revision) |
CHD 23 |
| 606 |
IS 8874 : 1977 |
Specification for dimethylamine, technical |
PCD 9 |
| 607 |
IS 9986 : 1999 |
Benzaldehyde - Specification (First Revision) |
PCD 9 |
| 608 |
IS 6704 : 1992 |
Pigmented floor polish, paste - Specification (First Revision) |
CHD 23 |
| 609 |
IS 6766 : 1993 |
Buffing compounds used for nickel and chrome plated surfaces - Specification (First Revision) |
CHD 23 |
| 610 |
IS 7984 : 1991 |
Rubbing compound - Specification (First Revision) |
CHD 23 |
| 611 |
IS 12518 : 1988 |
Shellac bond powder - Specification |
CHD 23 |
| 612 |
IS 12921 : 1990 |
Lac dye - Specification |
CHD 23 |
| 613 |
IS 13160 : 1991 |
Aleuritic acid - Specification |
CHD 23 |
| 614 |
IS 13294 : 1992 |
Non-buffable floor polish, liquid - Specification |
CHD 23 |
| 615 |
IS 13977 : 1994 |
Polish, liquid, multipurpose - Specification |
CHD 23 |
| 616 |
IS 5299 : 2001 |
Methods of sampling and tests for dye intermediates (First Revision) |
PCD 26 |
| 617 |
IS 14351 : 1996 |
Textiles – Ground sheets (light weight) – Specification |
TXD 20 |
| 618 |
IS 10760 : 1983 |
Specification for mussels canned in oil |
FAD 12 |
| 619 |
IS 11427 : 2001 |
Fish and fishery products - Sampling (First Revision) |
FAD 12 |
| 620 |
IS 14354 : 1996 |
Textiles – Waterproof covers – Specification |
TXD 20 |
| 621 |
IS 9886 : 1990 |
Mosquito nets – Specification (first revision) |
TXD 32 |
| 622 |
IS 5467 : 1986 |
Specification for shellac wax (First Revision) |
CHD 23 |
| 623 |
IS 2980 : 1999 |
Non - Pressure stoves - Specification (Third Revision) |
MED 26 |
| 624 |
IS 2787 : 2006 |
Oil pressure heaters - Specification (Third Revision) |
MED 26 |
| 625 |
IS 4624 : 1978 |
Specification for dehydrated peas (First Revision) |
FAD 10 |
| 626 |
IS 6771 : 1972 |
Specification for aluminium polish, paste for aircraft |
CHD 23 |
| 627 |
IS 4626 : 1978 |
Specification for dehydrated potatoes (First Revision) |
FAD 10 |
| 628 |
IS 10025 : 1981 |
Specification for polish, liuid (White), for canvas footwear |
CHD 23 |
| 629 |
IS 3110 : 2015 |
Silver leaf - Specification (Second Revision) |
FAD 8 |
| 630 |
IS 12010 : 1987 |
Specification for shoe polish, liquid |
CHD 23 |
| 631 |
IS 12123 : 1987 |
Specification for aluminium polish, liquid for aircraft |
CHD 23 |
| 632 |
IS 2141 : 2000 |
Hot dip galvanized stay strand - Specification (Fourth Revision) |
MED 10 |
| 633 |
IS 8153 : 1986 |
Method for sensory evaluation of fresh fruits (First Revision) |
FAD 10 |
| 634 |
IS 4208 : 1985 |
Specification for brush, stencil (Second Revision) |
CHD 23 |
| 635 |
IS 1699 : 1995 |
Methods of sampling and test for food colours (Second Revision) |
FAD 8 |
| 636 |
IS 13348 : 1992 |
Brush, rubber squeezer, with handle - Specification |
CHD 23 |
| 637 |
IS 384 : 2002 |
Brushes, paints and varnishes, flat - Specification (Fifth Revision) |
CHD 23 |
| 638 |
IS 10627 : 1983 |
Methods for sampling of pesticidal formulations |
FAD 1 |
| 639 |
IS 11022 : 1984 |
Methods of sampling and test for glues (bone, skin/fleshings and fish glues) |
PCD 27 |
| 640 |
IS 10946 : 1996 |
Methods of sampling for technical grade pesticides (First Revision) |
FAD 1 |
| 641 |
IS 3975 : 1999 |
Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision) |
MTD 4 |
| 642 |
IS 4454 : Part 1 : 2001 |
Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision) |
MTD 4 |
| 643 |
IS 4454 : Part 2 : 2001 |
Steel wire for mechanical springs - Specification february 2001: Part 2 oil hardened and tempered steel wire (Second Revision) |
MTD 4 |
| 644 |
IS 4454 : Part 4 : 2001 |
Steel wires for mechanical springs: Part 4 stainless steel wire (Second Revision) |
MTD 16 |
| 645 |
IS 8510 : Part 1 to 3 : 1977 |
Specification for tinned steel wire for banding of armatures and rotors |
MTD 4 |
| 646 |
IS 8565 : 1977 |
Specification for heald wire |
MTD 4 |
| 647 |
IS 10759 : 1983 |
Brewer's Yeast |
FAD 29 |
| 648 |
IS 8566 : 1977 |
Specification for steel wire for reeds |
MTD 4 |
| 649 |
IS 9962 : 1981 |
Specification for steel wire for needles |
MTD 4 |
| 650 |
IS 7188 : 1974 |
Methods of test for cellulose acetate flakes |
PCD 27 |
| 651 |
IS 7437 : 1974 |
Methods of sampling and test for vegetable adhesives |
PCD 27 |
| 652 |
IS 8402 : 1987 |
Methods of sampling and test for pressure sensitive adhesive tapes (First Revision) |
PCD 27 |
| 653 |
IS 5982 : 2003 |
Plantation white sugar - Specification (First Revision) |
FAD 2 |
| 654 |
IS 12190 : 1987 |
Specification for sheep bleeding shackles |
FAD 18 |
| 655 |
IS 12561 : 1988 |
Poultry products - Pickled quail eggs - Specification |
FAD 18 |
| 656 |
IS 13400 : 1992 |
Meat and meat Products - Chicken sausages - Specification |
FAD 18 |
| 657 |
IS 2475 : 1979 |
Specification for smoked bacon (First Revision) |
FAD 18 |
| 658 |
IS 2510 : 1976 |
Specification for bottom rollers for drafting systems (third revision) |
TXD 14 |
| 659 |
IS 3523 : 1974 |
Specification for metal travellers for ring spinning frame (second revision) |
TXD 14 |
| 660 |
IS 7075 : 1983 |
Specification for cardboard tubes used as cores for jute fabric rolls (first revision) |
TXD 14 |
| 661 |
IS 15100 : 2018 |
Multi - Function valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use - Specification (First Revision) |
MED 16 |
| 662 |
IS 2086 : 1993 |
Carriers and bases in rewirable type electric fuses for voltages up to 650 v - Specification (Third Revision) |
ETD 39 |
| 663 |
IS 11359 : 1985 |
Specification for wax candles |
MED 26 |
| 664 |
IS 9337 : Part 1 : 1979 |
Specification for bobbins and pirns used in textile mills: Part 1 wooden flyer bobbins |
TXD 14 |
| 665 |
IS 11872 : Part 1 and 2 : 1987 |
Specification for rollers for drawing and spinning frames in jute mill |
TXD 14 |
| 666 |
IS 11872 : Part 2 : 1987 |
Specification for rollers for drawing and spinning frames in jute mill |
TXD 14 |
| 667 |
IS 11898 : 1986 |
Specification for faller bar slides for jute drawing frames |
TXD 14 |
| 668 |
IS 11899 : 1986 |
Specification for flyers for jute spinning frames |
TXD 14 |
| 669 |
IS 9697 : 1980 |
Specification for bobbin cases for sewing machines with rotating hooks for industrial use |
MED 29 |
| 670 |
IS 10305 : 1982 |
Specification for feed rock shaft crank for sewing machines for household purposes |
MED 29 |
| 671 |
IS 10306 : 1982 |
Specification for feed lifting rocK shaft crank for sewing machines for household purposes |
MED 29 |
| 672 |
IS 11345 : 1985 |
Specification for oscillating shaft crank for sewing machines for household purposes |
MED 29 |
| 673 |
IS 14761 : 2000 |
Link type thread take up lever sub assembly for industrial sewing machines - Specification |
MED 29 |
| 674 |
IS 12839 : 1989 |
Wool/polyamide blended flannel, hospital, grey - Specification |
TXD 36 |
| 675 |
IS 1681 : 1998 |
Textiles – Hospital blankets, woollen, dyed – Specification (third revision) |
TXD 36 |
| 676 |
IS 10054 : 1996 |
Textiles – High density polyethylene (HDPE) monofilament mosquito netting, round mesh – Specification (first revision) |
TXD 32 |
| 677 |
IS 11192 : 1985 |
Methods for sampling of wool tops |
TXD 1 |
| 678 |
IS 7703 : Part 4 : 1981 |
Methods for test for continuous filament polyester and polyamide flat yarn: Part 4 sampling |
TXD 1 |
| 679 |
IS 3919 : 1966 |
Methods for sampling cotton fabrics for determination of physical characteristics |
TXD 1 |
| 680 |
IS 3920 : 1985 |
Methods for sampling of cotton yarn for determination of physical characteristics (first revision) |
TXD 1 |
| 681 |
IS 3545 : 1982 |
Meat Choppers |
MED 33 |
| 682 |
IS 9040 : 1978 |
Methods for sampling of utensils |
MED 33 |
| 683 |
IS 12811 : 1989 |
Worsted lohis - Specification |
TXD 4 |
| 684 |
IS 12818 : 2010 |
Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision) |
CED 50 |
| 685 |
IS 12812 : 1989 |
Worsted shawls - Specification |
TXD 4 |
| 686 |
IS 13592 : 2013 |
Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System |
CED 50 |
| 687 |
IS 12838 : 1989 |
Blazer cloth - Specification |
TXD 4 |
| 688 |
IS 12848 : 1989 |
Wool/polypropylene blended blankets - Specification |
TXD 4 |
| 689 |
IS 14292 : 1995 |
Textiles - Shoddy woollen barrack blankets - Specification |
TXD 4 |
| 690 |
IS 1530 : 1981 |
Specification for baize cloth (second revision) |
TXD 4 |
| 691 |
IS 675 : 1973 |
Specification for bunting, worsted (second revision) |
TXD 4 |
| 692 |
IS 677 : 1974 |
Specification for cloth drab-mixture, woollen, water-resistant (second revision) |
TXD 4 |
| 693 |
IS 13593 : 1992 |
Upvc Pipe Fittings to be Used with the Upvc Pipes in the Suction and Delivery Lines Of Agricultural Pumps |
CED 50 |
| 694 |
IS 14787 : 2000 |
Unplasticized pvc pipes (Ducts) and fittings for underground telecommunications cable installation - Specification |
CED 50 |
| 695 |
IS 12806 : 1989 |
Nonwoven fusible interlinings - Specification |
TXD 33 |
| 696 |
IS 12809 : 1989 |
Nonwoven sew-in interlinings - Specification |
TXD 33 |
| 697 |
IS 13128 : Part 1 : 1991 |
Textiles – Fabric, woven glass fibre, for electrical insulation and plastic laminate – Specification Part 1 Loomstate fabrics |
TXD 33 |
| 698 |
IS 13128 : Part 2 : 1991 |
Textiles – Fabric, woven glass fibre, for electrical insulation and plastic laminate – Specification Part 2 Desized and finished fabrics |
TXD 33 |
| 699 |
IS 13510 : 2000 |
Textiles – Duck, polyester cotton blended, rip-stop – Specification (first revision) |
TXD 33 |
| 700 |
IS 15328 : 2003 |
Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems - |
CED 50 |
| 701 |
IS 15778 : 2007 |
Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification |
CED 50 |
| 702 |
IS 15927 : PART 3 : 2011 |
Polyethylene Fittings for use with Polyethylene Pipes for the Supply of Gaseous Fuels - Part 3 Electro Fusion Fittings |
CED 50 |
| 703 |
IS 16098 Part 1 : 2013 |
Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A |
CED 50 |
| 704 |
IS 16098 Part 2 : 2013 |
Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B |
CED 50 |
| 705 |
IS 4984 : 2016 |
Polyethylene pipes for water supply - Specification (Fifth Revision) |
CED 50 |
| 706 |
IS 3888 : 1987 |
Specification for spatula, stainless steel, dental (First Revision) |
MHD 8 |
| 707 |
IS 7133 : 1985 |
Specification for cotton tyre cord and warp sheet for cycle and rickshaw (first revision) |
TXD 38 |
| 708 |
IS 3889 : 1985 |
Specification for chisels, dental (First Revision) |
MHD 8 |
| 709 |
IS 3890 : Part 1 : 1986 |
Specification for instruments, plastic filling, dental: Part 1 designation numbers 1, 3, 4, 5 and 6 (First Revision) |
MHD 8 |
| 710 |
IS 9293 : 1991 |
Textiles – Canvas, flax – Specification (first revision) |
TXD 33 |
| 711 |
IS 4319 : Part 2 : 1986 |
Specification for pliers, stretching and contouring, dental: Part 2 pliers, contouring (First Revision) |
MHD 8 |
| 712 |
IS 4714 : 1985 |
Specification for scalers, dental, No. Sc 1/2, 3/4 and 5/6 (First Revision) |
MHD 8 |
| 713 |
IS 4975 : 1986 |
Specification for elevators, dental, No. 1, 2 and 3 (First Revision) |
MHD 8 |
| 714 |
IS 5179 : 1986 |
Specification for pluggers, root canal, dental, No. PLG 1, 2 and 3 (First Revision) |
MHD 8 |
| 715 |
IS 8360 : Part 1 : 1977 |
fabricated high density polyethylene (HDPE) fittings for potable water supplies: Part 1 General requirements |
CED 50 |
| 716 |
IS 9271 : 2004 |
Unplasticized polyvinyl chloride (UPVC) single wall corrugated pipes for drainage - Specification (First Revision) |
CED 50 |
| 717 |
IS 5576 : 1985 |
Specification for carriers, amalgam, dental, No. 1 and 2 (First Revision) |
MHD 8 |
| 718 |
IS 13684 : 2006 |
Textiles – Rotor spun grey cotton yarn – Specification (first revision) |
TXD 31 |
| 719 |
IS 14379 : 1996 |
Textiles - Grading of cotton |
TXD 31 |
| 720 |
IS 15851 : 2009 |
Textiles – Polyester cotton blended woven saris for uniforms |
TXD 31 |
| 721 |
IS 15852 : 2009 |
Textiles – Polyester blended woven shirting for uniforms |
TXD 31 |
| 722 |
IS 10297 : 1982 |
Code of practice for design and construction of floors and roofs using precast reinforced/prestressed concrete ribbed or cored slab units |
CED 32 |
| 723 |
IS 15853 : 2009 |
Textiles – Polyester blended woven suiting for uniforms |
TXD 31 |
| 724 |
IS 834 : 2006 |
Textiles – Ring spun grey cotton yarn for hosiery – Specification (fifth revision) |
TXD 31 |
| 725 |
IS 5582 : 1986 |
Specification for mandrels, dental, No. 1, 2 and 3 (First Revision) |
MHD 8 |
| 726 |
IS 5794 : 1986 |
Specification - For pliers, pin - Roughening and bending, dental (First Revision) |
MHD 8 |
| 727 |
IS 10207 : 1982 |
Methods of sampling grey iron and malleable iron castings |
MTD 6 |
| 728 |
IS 14143 : 1994 |
Prefabricated Brick Panel And Partially Precast Concrete Joist For Flooring And Roofing |
CED 32 |
| 729 |
IS 14201 : 1994 |
Precast reinforced concrete channel units for construction of floors and roofs - Specification |
CED 32 |
| 730 |
IS 12987 : 1991 |
Cast iron detachable joints for use with asbestos cement pressure pipes (Light Duty) - Specification |
MTD 6 |
| 731 |
IS 6292 : 1986 |
Specification for cotton wool holder, dental (First Revision) |
MHD 8 |
| 732 |
IS 6402 : 1986 |
Specification for forceps, rubber dam clamp and cotton roll clamp, dental (First Revision) |
MHD 8 |
| 733 |
IS 14241 : 1995 |
Precast reinforced concrete L - panel for roofing - Specification |
CED 32 |
| 734 |
IS 6866 : 1986 |
Specification for forceps, extraction, dental, upper wisdom tooth (First Revision) |
MHD 8 |
| 735 |
IS 6868 : 1991 |
Dental instruments - Dental extraction forceps - Specification (First Revision) |
MHD 8 |
| 736 |
IS 10790 : Part 1 : 1984 |
Methods of sampling of steel for prestressed and reinforced concrete: Part 1 prestressing steel |
CED 54 |
| 737 |
IS 10790 : Part 2 : 1984 |
Methods of sampling of steel for prestressed and reinforced concrete: Part 2 reinforcing steel |
CED 54 |
| 738 |
IS 6870 : 1986 |
Specification for pliers, loop bending, dental (First Revision) |
MHD 8 |
| 739 |
IS 7474 : 1986 |
Specification for pliers, collar, dental (First Revision) |
MHD 8 |
| 740 |
IS 5404 : 1984 |
Methods for drawing and handling of food samples for microbiological analysis (First Revision) |
FAD 31 |
| 741 |
IS 11152 : 1984 |
Specification for laboratory stands (Metallic) |
PGD 22 |
| 742 |
IS B12397 : 1988 |
Specification for metallic dissecting trays |
PGD 22 |
| 743 |
IS 12399 : 1988 |
Specification for tripod stands |
PGD 22 |
| 744 |
IS 7966 : 1976 |
Specification for dental modelling wax |
MHD 8 |
| 745 |
IS 8020 : 1976 |
Specification for baseplate, dental |
MHD 8 |
| 746 |
IS 10106 : Part 4 : Sec 4 : 1984 |
Packaging code: Part 4 packages section 4 glass containers |
TED 24 |
| 747 |
IS 8571 : 1977 |
Specification for dental porcelain |
MHD 8 |
| 748 |
IS 2486 : Part 1 : 1993 |
Metal fittings of insulators for overhead power lines with nominal voltage greater than 1000 V - Specification: Part 1 general requirements and tests (Second Revision) |
ETD 6 |
| 749 |
IS 11279 : 1985 |
Specification for braille slate |
MHD 9 |
| 750 |
IS 11316 : 1985 |
Specification for cosmetic hand, artificial limb |
MHD 9 |
| 751 |
IS 6854 : 1973 |
Methods of sampling and test for ingredients used in media for microbiological work |
FAD 31 |
| 752 |
IS 12152 : 1987 |
Specification for pocket frame, braille writing |
MHD 9 |
| 753 |
IS 4759 : 1996 |
Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision) |
MTD 24 |
| 754 |
IS 13315 : 1992 |
Nickel cadmium batteries for electric locomotives - Specification |
ETD 11 |
| 755 |
IS 15549 : 2005 |
Stationary valve regulated lead acid batteries - Specification |
ETD 11 |
| 756 |
IS 7372 : 1995 |
Lead - Acid storage batteries for motor vehicles - Specification (First Revision) |
ETD 11 |
| 757 |
IS 7624 : 1990 |
Lead - Acid starter batteries for diesel - locomotives and rail cars - Specification (First Revision) |
ETD 11 |
| 758 |
IS 8320 : 2000 |
General requirements and methods of tests for lead - Acid storage batteries (Second Revision) |
ETD 11 |
| 759 |
IS 14415 : 1997 |
Volt - Ampere hour meters for restricted power factor range - Specificaiton |
ETD 13 |
| 760 |
IS 14451 : Part 2 : 1999 |
Telemetering for consumption and demands: Part 2 direct digital transfer of meter values |
ETD 13 |
| 761 |
IS 8657 : 1977 |
Specification for tapered withdrawal sleeves for rolling bearings |
PGD 13 |
| 762 |
IS 12781 : 1989 |
Marine bucket for sea surface temperature measurement - Specification |
PGD 21 |
| 763 |
IS 7179 : 1973 |
Specification for disposable plastic artificial insemination pipettes for cattle |
FAD 32 |
| 764 |
IS 5653 : 1988 |
Specification for pins, paper, straight (First Revision) |
PGD 14 |
| 765 |
IS 7373 : 2003 |
Hip disarticulation joint unit for lower limb prosthetic fitments - Specification (Second Revision) |
MHD 9 |
| 766 |
IS 9867 : 1981 |
Specification for parboiled rice bran as livestock feed ingredient |
FAD 5 |
| 767 |
IS 12829 : 1989 |
Mango seed kernel (Solvent Extracted) as livestock feed ingredient - Specification |
FAD 5 |
| 768 |
IS 13426 : 1992 |
Animal feeds and feeding stuffs - Methods of sampling for aflatoxin analysis |
FAD 5 |
| 769 |
IS 4270 : 2001 |
Steel tubes used for water wells specification (Third Revision) |
MTD 19 |
| 770 |
IS 4711 : 2008 |
Methods for sampling of steel pipes, tubes and fittings (Second Revision) |
MTD 19 |
| 771 |
IS 1449 : 2010 |
Methods of sampling of manganese ores (Second Revision) |
MTD 13 |
| 772 |
IS 8492 : 1985 |
Specification for ankle blocks, wooden (First Revision) |
MHD 9 |
| 773 |
IS 8511 : 1985 |
Specification for valves for suction socket for artificial limbs (First Revision) |
MHD 9 |
| 774 |
IS 10032 : 2013 |
Organic no bake (Self Setting) binders for use in foundries - Specification (First Revision) |
MTD 14 |
| 775 |
IS 6907 : 1992 |
Steel castings - Mcethods of sampling (First Revision) |
MTD 14 |
| 776 |
IS 4229 : 1992 |
Textiles – Nylon sewing threads for aerospace purposes – Specification (second revision) |
TXD 13 |
| 777 |
IS 6773 : 2008 |
Sodium silicate for use in foundries - Specification (Second Revision) |
MTD 14 |
| 778 |
IS 6079 : 1989 |
Low alloy cast steel grinding media - Specification (Second Revision) |
MTD 14 |
| 779 |
IS 12388 : 1988 |
Specification for handloom cotton voile |
TXD 8 |
| 780 |
IS 1267 : 1992 |
Handloom worsted rafal shawls and lohis (first revision) |
TXD 8 |
| 781 |
IS 8967 : Part 1 : 1992 |
Farm Drainage Equipment - Drainage Clay Tiles - Specification : Part 1 Tiles With Open Joints (First Revision) |
FAD 17 |
| 782 |
IS 2158 : 1991 |
Handloom viscose staple fibre LUNGIES – Specification (first revision) |
TXD 8 |
| 783 |
IS 14151 : Part 1 : 1999 |
Irrigation Equipment - Sprinkler Pipes - Specification : Part 1 Polyethylene Pipes (First Revision) |
FAD 17 |
| 784 |
IS 14151 : Part 2 : 2008 |
Irrigation Equipment - Sprinkler Pipes - Specification : Part 2 Quick Coupled Polyethylene Pipes and Fittings (Second Revision) |
FAD 17 |
| 785 |
IS 3772 : 1994 |
Textiles – Mazri, cotton khadi, scoured – Specification (first revision) |
TXD 8 |
| 786 |
IS 3773 : 1994 |
Textiles – Napkins and table cloth, cotton khadi, bleached – Specification |
TXD 8 |
| 787 |
IS 3780 : 2019 |
Textiles — Dungri Cloth, Cotton Khadi, Bleached — Specification ( Second Revision ) |
TXD 8 |
| 788 |
IS 3784 : 1994 |
Textiles – Cloth, cotton khadi, bleached, for general purposes – Specification (first revision) |
TXD 8 |
| 789 |
IS 4107 : 1994 |
Textiles – Blanketing cloth wool khadi (first revision) |
TXD 8 |
| 790 |
IS 4371 : 1994 |
Textiles – KAMBLIES, wool khadi, loomstate –Specification (first revision) |
TXD 8 |
| 791 |
IS 4372 : 1994 |
Textiles – Cloth, twill, wool khadi, dyed – Specification (first revision) |
TXD 8 |
| 792 |
IS 12549 : 1988 |
Specification for iron nickel cobalt sealing alloy |
MTD 16 |
| 793 |
IS 996 : 2009 |
Single phase a.c. induction motors for general purpose (Third Revision) |
ETD 15 |
| 794 |
IS 1528 : Part 7 : 2010 |
Methods of sampling and physical tests for refractory materials: Part 7 methods of sampling and criteria for conformity (Second Revision) |
MTD 15 |
| 795 |
IS 892 : 1980 |
Specification for handloom wool blankets, natural grey/brown (second revision) |
TXD 8 |
| 796 |
IS 12646 : 1991 |
Textiles – Colour fastness ratings – Specification (first revision) |
TXD 5 |
| 797 |
IS 7201 : Part 1 : 1987 |
Methods of Sampling for Agricultural Machinery and Equipment : Part 1 Hand - Tools and Hand - Operated / Animal Drawn Equipment (First Revision) |
FAD 11 |
| 798 |
IS 9935 : 2002 |
Power Tiller - Test Code (Second Revision) |
FAD 11 |
| 799 |
IS 9223 : 1989 |
Portable Earth Resistance Meters |
ETD 12 |
| 800 |
IS 14930 : Part 2 : 2001 |
Conduit Systems for Electrical Installations - Part 2 : Particular Requirements - Conduit Systems Burried Underground |
ETD 14 |
| 801 |
IS 8448 : 1989 |
Automatic line voltage correctors (Step Type) for domestic use - Specification (First Revision) |
ETD 16 |
| 802 |
IS 8447 : 1989 |
Manually operated voltage regulators for domestic use - Specification (First Revision) |
ETD 16 |
| 803 |
IS 9815 : Part 1 : 1994 |
Servo - Motor operated automatic line voltage correctors: Part 1 correctors for single - Phase applications - Specification (Second Revision) |
ETD 16 |
| 804 |
IS 11467 : 1985 |
Test Code for Cereal - Harvesting Machines |
FAD 11 |
| 805 |
IS 12191 : 1987 |
Specification for Felling Wedges |
FAD 11 |
| 806 |
IS 12627 : 1989 |
Forestry Tools - Loop Handles Two Men Cross Cut Saws - Specification |
FAD 11 |
| 807 |
IS 12651 : 1989 |
Forestry Tools - Setting Anvil for Raker Toothed Two Men Cross Cut Saws - Specification |
FAD 11 |
| 808 |
IS 12704 : 1989 |
Forestry Tools - Wooden Jointer For Bow Saw Blade - Specification |
FAD 11 |
| 809 |
IS 15805 : Part 2 : 2008 |
Straw Reaper - Combine Test Code : Part 2 Performance Tests |
FAD 11 |
| 810 |
IS 12164 : 1987 |
Specification for Log Tongs |
FAD 11 |
| 811 |
IS 5680 : 1969 |
Specification for rubber tubing for medical use |
MHD 11 |
| 812 |
IS 7176 : 1985 |
Specification for anaesthetic apparatus, drawover portable type (First Revision) |
MHD 11 |
| 813 |
IS 10520 : 1989 |
Agricultural Produce Milling Machinery - Emery Stones for Burr Flour Mills - Specification (First Revision) |
FAD 20 |
| 814 |
IS 7885 : 1985 |
Spray, Macintosh's Pattern |
MHD 11 |
| 815 |
IS 966 : 1999 |
Desiccated coconut - Specification (Second Revision) |
FAD 10 |
| 816 |
IS 13340 : 1993 |
Power capacitors of self-Healing type for AC power systems having rated voltage up to 650 V - Specification |
ETD 29 |
| 817 |
IS 692 : 1994 |
Paper insulated lead sheathed cables for rated voltage up to and including 33 kV - Specification (Third Revision) |
ETD 9 |
| 818 |
IS 694 : 2010 |
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 V (Fourth Revision) |
ETD 9 |
| 819 |
IS 7098 : Part 2 : 2011 |
Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision) |
ETD 9 |
| 820 |
IS 9857 : 1990 |
Welding cables - Specification (First Revision) |
ETD 9 |
| 821 |
IS 9968 : Part 2 : 2002 |
Specification for elastomer - Insulated cables: Part 2 for working voltages from 3.3 kV up to and including 33 kV (First Revision) |
ETD 9 |
| 822 |
IS 2215 : 2006 |
Starters for fluorescent lamps (Third Revision) |
ETD 23 |
| 823 |
IS 2077 : 2014 |
Automotive vehicles - Electric relays - Specification (Third Revision) |
TED 11 |
| 824 |
IS 3141 : 2007 |
Starter motors for internal combustion engines used for automotive and other applications - Specification (Second Revision) |
TED 11 |
| 825 |
IS 11086 : 2013 |
Speedometer/odometer systems for automotive application - Specification (First Revision) |
TED 11 |
| 826 |
IS 4086 : 1983 |
Specification for distributors for spark ignition engines (First Revision) |
TED 11 |
| 827 |
IS 4815 : 1982 |
Specification for self - Cancelling direction indicator switches for automobiles (First Revision) |
TED 11 |
| 828 |
IS 5439 : 2017 |
Oil pressure switches for automobiles - Specification (Second Revision) |
TED 11 |
| 829 |
IS 5577 : 2015 |
Automotive vehicles - Ammeters - Specification (Third Revision) |
TED 11 |
| 830 |
IS 15584 : 2005 |
Medical X-ray films |
MHD 15 |
| 831 |
IS 7827 : Part 3 : Sec 1 : 1993 |
Automotive vehicles electrical wiNd screEn wipers: Part 3 wiper arms and blades section 1 wiper arms - Specification |
TED 11 |
| 832 |
IS 7827 : Part 3 : Sec 2 : 1985 |
Specification for electrical wind screen wiper: Part 3 wiper arms and blades section 2 wiper blades |
TED 11 |
| 833 |
IS 8395 : Part 1 : 1977 |
Specification for cable terminations for automobile wiring: Part 1 blade type connectors (Male And Female) |
TED 11 |
| 834 |
IS 4062 : 1986 |
Specification for foot - Operated head - Light dip switches for automobiles (First Revision) |
TED 11 |
| 835 |
IS 9500 : 2017 |
360 degree rotary emergency warning lights/special warning lamps - Specification (First Revision) |
TED 11 |
| 836 |
IS 9521 : 1980 |
Specification for push - Button type switches for automotive vehicles |
TED 11 |
| 837 |
IS 14274 : 1995 |
Bandage, T - Shaped, calico - Specification |
TXD 36 |
| 838 |
IS 14306 : 1995 |
Bandage, triangular, calico – Specification |
TXD 36 |
| 839 |
IS 11903 : 1986 |
Specification for caps for aircraft tyre tube valves |
TED 14 |
| 840 |
IS 10116 : 2015 |
Boric acid - Specification (First Revision) |
CHD 1 |
| 841 |
IS 5022 : 1989 |
Sterilizer, instruments, table model (Third Revision) |
MHD 12 |
| 842 |
IS 6779 : 1989 |
Thoracic Surgery Instruments - Forceps, Dissecting and Ligature, Mixter's Pattern - Specification (First Revision) |
MHD 6 |
| 843 |
IS 15694 : 2006 |
Potassium iodate, food grade - Specification |
FAD 8 |
| 844 |
IS 12652 : 1989 |
Forestry Tools - Raker Adjuster - Cum - Setting Iron For Two Men Cross Cut Saws - Specification |
FAD 11 |
| 845 |
IS 16414 : 2015 |
Hypromellose (HPMC) capsule shells - Specification |
FAD 8 |
| 846 |
IS 8783 : Part 4 : Sec 1 : 1995 |
Winding wires for submersible motors - Specification: Part 4 specification for indmdual wires: Sec 1 HR PVC insulated wires (First Revision) |
ETD 33 |
| 847 |
IS 11298 : Part 3 : Sec 1 : 1991 |
Plastic films for electrical purposes - Specification: Part 3 specifications for individual materials: Sec 1 polypropylene films for capacitors (First Revision) |
ETD 2 |
| 848 |
IS 8784 : 1987 |
Specification for thermocouple compensating cables (Second Revision) |
ETD 18 |
| 849 |
IS 9334 : 1986 |
Specification for electric motor operated actuators (First Revision) |
ETD 18 |
| 850 |
IS B3466 : 1988 |
Specification For Masonry Cement |
CED 2 |
| 851 |
IS B6452 : 1989 |
High Alumina Cement For Structural Use(bi-lingual) |
CED 2 |
| 852 |
IS 12269 : 2013 |
Ordinary Portland cement, 53 grade |
CED 2 |
| 853 |
IS 8200 : 1976 |
Toggle switches used in traction application |
ETD 14 |
| 854 |
IS 16415 : 2015 |
Composite cement - Specification |
CED 2 |
| 855 |
IS 16525 : 2017 |
Styrene butadiene styrene (SBS) 3 bituminous waterproofing and damp - Proofing membrane with polyester reinforcement - Specification |
CED 41 |
| 856 |
IS 16526 : 2017 |
Atactic polypropylene (APP) 3 bituminous waterproofing and damp - Proofing membrane with glass fibre reinforcement - Specification |
CED 41 |
| 857 |
IS 16532 : 2017 |
APP Modified Bituminous Waterproofing and Damp-Proofing Membrane with Polyester Reinforcement - Specification |
CED 41 |
| 858 |
IS 16540 : 2017 |
Atactic polypropylene (APP) 3 high molecular high density polyethylene (HMHDPE) bituminous waterproofing and damp - Proofing membrane - Specification |
CED 41 |
| 859 |
IS 8920 : 1978 |
Methods for sampling of burnt clay tiles |
CED 30 |
| 860 |
IS 16295 : 2015 |
Polyurethane cold box binder for use in foundries - Specification |
MTD 14 |
| 861 |
IS 16654 : 2017 |
Geosynthetics - Polypropylene multifilament woven geobags for coastal and waterways protection - Specification |
TXD 30 |
| 862 |
IS 383 : 2016 |
Coarse and Fine Aggregate for Concrete - Specification (Third Revision) |
CED 2 |
| 863 |
IS 16668 : 2017 |
Medical textiles - Salicylic acid adhesive plaster - Specification |
TXD 36 |
| 864 |
IS 16669 : 2017 |
Medical textiles - Elastic adhesive dressing - Specification |
TXD 36 |
| 865 |
IS 16670 : 2017 |
Medical textiles - Absorbent cotton ribbon gauze - Specification |
TXD 36 |
| 866 |
IS 10109 : 2018 |
Oil pressure stoves - Offset burner type - Specification (Second Revision) |
MED 26 |
| 867 |
IS 16653 : 2017 |
Geosynthetics - Needle punched nonwoven geobags for coastal and waterways protection - Specification |
TXD 30 |
| 868 |
IS 12252 : 2017 |
Polyalkylene terephthalates (pet and pbt), their copolymers and list of constituents in raw materials and end products for their safe use in contact with foodstuffs and pharmaceuticals (First Revision) |
PCD 12 |
| 869 |
IS 16647 : 2017 |
Oriented unplasticized polyvinyl chloride (Pvc - O) pipes for water supply - Specification |
CED 50 |
| 870 |
IS 16949 : 2018 |
Medical textiles - Adhesive extension plaster - Specification |
TXD 36 |
| 871 |
IS 16950 : 2018 |
Medical textiles - X - Ray detectable absorbent cotton gauze - Specification |
TXD 36 |
| 872 |
IS 16962 : 2018 |
Areca nut - Specification |
FAD 10 |
| 873 |
IS 789 : 2018 |
Ink, drawing, waterproof, black ? specification (Second Revision) |
CHD 14 |
| 874 |
IS 11503 : 2018 |
Slates, writing, school - Specification (First Revision) |
CHD 14 |
| 875 |
IS 14332 : 2018 |
Tobacco and tobacco products - Hookah tobacco paste - Specification (First Revision) |
FAD 4 |
| 876 |
IS 1135 : 2018 |
Springs - Leaf springs assembly for automobiles - Specification (Sixth Revision) |
TED 34 |
| 877 |
IS 8050 : 2018 |
Alpha picoline - Specification (First Revision) |
PCD 9 |
| 878 |
IS 16993 : 2018 |
Microfine Ordinary Portland Cement — Specification |
CED 2 |
| 879 |
IS 17075 : 2019 |
Anhydrous methanol for use as a blending component in fuels - Specification |
PCD 3 |
| 880 |
IS 1981 : 2018 |
Animal casings ? grades and specification (Second Revision) |
FAD 18 |
| 881 |
IS 1769 : Part 2 : 2019 |
Cigars and cheroots - Specification: Part 2 cheroots (Third Revision) |
FAD 4 |
| 882 |
IS 11673 : Part 1 : 2019 |
Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision) |
CHD 1 |
| 883 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
| 884 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
| 885 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
| 886 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
| 887 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
| 888 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
| 889 |
IS 14494 : 2019 |
Elastomer insulated flexible cables for use in mines - Specification (First Revision) |
ETD 9 |
| 890 |
IS 1769 : Part 1 : 2018 |
Cigars and cheroots - Specification: Part 1 cigars (Third Revision) |
FAD 4 |
| 891 |
IS 5664 : 2019 |
Lubricating connectors - Specification (Second Revision) |
PGD 19 |
| 892 |
IS 8058 : 2018 |
Pyridine - Specification (First Revision) |
PCD 9 |
| 893 |
IS 2553 : Part 3 : 2019 |
Safety glass - Specification: Part 3 solar applications |
CHD 10 |
| 894 |
IS 3769 : 2019 |
Textiles – Pugree cloth, cotton khadi, bleached or dyed – Specification (second revision), (first revision) |
TXD 8 |
| 895 |
IS 3770 : 2019 |
Textiles – Dosuti, cotton khadi, bleached or dyed – Specification (second revision) |
TXD 8 |
| 896 |
IS 3771 : 2019 |
Textiles – Long cloth, cotton khadi, bleached – Specification (second revision) |
TXD 8 |
| 897 |
IS 3777 : 2019 |
Textiles – Dusters, cotton khadi, bleached – Specification (second revision) |
TXD 8 |
| 898 |
IS 3779 : 2019 |
Textiles – Sheeting cloth, cotton khadi, bleached – Specification (second revision) |
TXD 8 |
| 899 |
IS 3778 : 2019 |
Textiles – Dungri cloth, cotton khadi, bleached – Specification (second revision) |
TXD 8 |
| 900 |
IS 3781 : 2019 |
Textiles – Honeycomb and huckaback towels, Cotton khadi, bleached or dyed – Specification (second revision) |
TXD 8 |
| 901 |
IS 3782 : 2019 |
Textiles – Sponge cloth, cotton khadi, grey – Specification (second revision) |
TXD 8 |
| 902 |
IS 4106 : 2019 |
Textiles – Bunting cloth, cotton khadi, dyed – Specification (second revision) |
TXD 8 |
| 903 |
IS 14257 : 2019 |
Lead - Acid storage batteries for motor vehicles with light weight and high cranking performance - Specification (First Revision) |
ETD 11 |
| 904 |
IS 10151 : 2019 |
Polyvinyl chloride (pvc) and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification (First Revision) |
PCD 12 |
| 905 |
IS 1342 : 2019 |
Oil pressure stoves - Specification (Seventh Revision) |
MED 26 |
| 906 |
IS 1065 : Part 1 : 2019 |
Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision) |
CHD 1 |
| 907 |
IS 1065 : Part 2 : 2019 |
Stable bleaching powder - Specification: Part 2 treatment of water intended for drinking |
CHD 1 |
| 908 |
IS 3565 : 2018 |
Teats for feeding bottles - Specification (First Revision) |
PCD 13 |
| 909 |
IS 636 : 2018 |
Non - Percolating flexible fire fighting delivery hose - Specification (Fourth Revision) |
PCD 13 |
| 910 |
IS 8391 : Part 1 : 2019 |
Rubberized coir sheets for cushioning – Specification Part 1 Curled (third revision) |
TXD 25 |
| 911 |
IS 8391 : Part 3 : 2019 |
Rubberized coir sheets for cushioning – Specification Part 3 Sandwiched (third revision) |
TXD 25 |
| 912 |
IS 17230 : 2019 |
Plastic Carry Case for Storage, Transportation and Carriage of Voter Verifiable Paper Audit Trail ( VVPAT ) Printer — Specification |
PCD 12 |
| 913 |
IS 17230 : 2019 |
Plastic Carry Case for Storage, Transportation and Carriage of Voter Verifiable Paper Audit Trail ( VVPAT ) Printer — Specification |
PCD 12 |
| 914 |
IS 17266 : 2019 |
Textiles – Viscose staple fibres – Specification |
TXD 31 |
| 915 |
IS 5405 : 2019 |
Sanitary napkins – Specification (second revision) |
TXD 36 |
| 916 |
IS 17216 : 2019 |
Polyethylene Mulch Films for Agriculture and Horticulture ― Specification |
PCD 12 |
| 917 |
IS 11037 : 2019 |
Electronic Type Fan Regulators — Specification ( First Revision ) |
ETD 14 |
| 918 |
IS 17270 : 2019 |
Intelligent Transport Systems ( ITS ) : Reverse Parking Alert System ( RPAS ) |
TED 28 |
| 919 |
IS 6303 : 2018 |
Primary batteries - General (Second Revision) |
ETD 10 |
| 920 |
IS 8144 : 2018 |
Multipurpose dry batteries - Specification (Second Revision) |
ETD 10 |
| 921 |
IS 17135 : 2019 |
Biofertilizer - Liquid Based Azotobacter spp. Inoculants - Specification |
FAD 7 |
| 922 |
IS 17291 : 2019 |
Textiles – Flame retardant jute based decorative and cover fabric for temporary structure – Specification |
TXD 32 |
| 923 |
IS 17334 : 2019 |
Medical textiles – Surgical gowns and surgical drapes – Specification |
TXD 36 |
| 924 |
IS 17348 : 2020 |
Medical textiles – Adhesive incise drape – Specification |
TXD 36 |
| 925 |
IS 17350 : 2020 |
Medical textiles – Abdominal binder – Specification |
TXD 36 |
| 926 |
IS 17351 : 2020 |
Medical textiles – Dressing, shell compressed – Specification |
TXD 36 |
| 927 |
IS 17352 : 2020 |
Medical textiles – Foam dressing – Specification |
TXD 36 |
| 928 |
IS 17354 : 2020 |
Medical textiles – Dental bib/Napkins – Specification |
TXD 36 |
| 929 |
IS 17353 : 2020 |
Medical textiles – Pressure garment – Specification |
TXD 36 |
| 930 |
IS 17359 : 2020 |
Medical textiles – Anti-embolic stocking for Post op use upto thigh medium – Specification |
TXD 36 |
| 931 |
IS 17346 : 2020 |
Insulating Glazing Unit — Specification |
CHD 10 |
| 932 |
IS 17156 : Part 2 : 2020 |
Cotton Picker Machine : Part 2 Performance Test |
FAD 11 |
| 933 |
IS 11060 : 2020 |
Specification for moulded rubberized coir cushioning (first revision) |
TXD 25 |
| 934 |
IS 695 : 2020 |
Acetic acid - Specification (Fourth Revision) |
PCD 9 |
| 935 |
IS 9743 : 2020 |
Thermal Insulation Finishing Cement — Specification ( Second Revision ) |
CHD 27 |
| 936 |
IS 14900 : 2018 |
Transparent float glass - Specification (First Revision) |
CHD 10 |
| 937 |
IS 2553 : Part 1 : 2018 |
Safety glass - Specification: Part 1 architectural, building and general uses (Fourth Revision) |
CHD 10 |
| 938 |
IS 6598 : 2018 |
Cellular concrete for thermal insulation - Specification (First Revision) |
CHD 27 |
| 939 |
IS 14483 : Part 3 : 2018 |
Fertilizer and Chemical Injector System : Part 3 Fertilizer Tank - Specification |
FAD 17 |
| 940 |
IS 498 : 2018 |
Grading for vacuum pan (Plantation White And Refined) sugar (Sixth Revision) |
FAD 2 |
| 941 |
IS 17134 : 2020 |
Biofertilizer - Liquid Based Rhizobium Inoculants - Specification |
FAD 7 |
| 942 |
IS 17389 : 2020 |
Textiles – Polyvastra pillow cover, Khadi – Specification |
TXD 8 |
| 943 |
IS 170 : 2020 |
Acetone - Specification (Fifth Revision) |
PCD 9 |
| 944 |
IS 538 : 2020 |
Phenol (carbolic acid) - Specification (Third Revision) |
PCD 9 |
| 945 |
IS 9908 : 2020 |
Specification for formic acid (First Revision) |
PCD 9 |
| 946 |
IS 16352 : 2020 |
Geosynthetics – High density polyethylene (HDPE) geomembranes for lining – Specification (first revision) |
TXD 30 |
| 947 |
IS 4989 : 2018 |
Foam concentrate for producing mechanical foam for fire fighting - Specification (Fourth Revision) |
CED 22 |
| 948 |
IS 4308 : 2019 |
Dry Chemical Powders for Fire Fighting — BC, ABC and D Types — Specification ( Third Revision ) |
CED 22 |
| 949 |
IS 17217 : 2019 |
Textiles – Disruptive pattern (Camouflage pattern) cloth for jungle operations made of nylon and cotton blended (NYCO) material - Specification |
TXD 31 |
| 950 |
IS 16948 : 2018 |
Medical textile – Permeable nonwoven surgical adhesive tape – Specification |
TXD 36 |
| 951 |
IS 16946 : 2018 |
Medical textiles – Elasticated tubular bandages – Specification |
TXD 36 |
| 952 |
IS 17410 : 2020 |
Medical Textiles — Bio-Protective Coverall — Specification |
TXD 36 |
| 953 |
IS 17388 : 2020 |
Textiles – Polyvastra bedsheets, Khadi – Specification |
TXD 8 |
| 954 |
IS 869 : 2020 |
Specification for ethylene dichloride (Third Revision) |
PCD 9 |
| 955 |
IS 17403 : 2020 |
Magnalium for Explosives and Pyrotechnic Composition — Specification |
CHD 26 |
| 956 |
IS 4217 : 2020 |
Rolling bearings -- Needle rollers -- Specification (Second Revision) |
PGD 13 |
| 957 |
IS 5758 : 2020 |
Precast Concrete Kerbs, Channels, Edging, Quadrants and Other Associated Fittings - Specification ( Second Revision ) |
CED 53 |
| 958 |
IS 17425 : 2020 |
Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification |
FAD 17 |
| 959 |
IS 1263 : 2020 |
Cocoa Butter — Specification ( Fourth Revision ) |
FAD 6 |
| 960 |
IS 14635 : Part 1 : 2020 |
Fluoropolymer dispersions and moulding and extrusion materials : Part 1 designation system (First Revision) |
PCD 12 |
| 961 |
IS 17480 : 2020 |
High density polyethylene multi squeezable tube for packaging - Specification |
PCD 21 |
| 962 |
IS 17506 : 2020 |
Medical Textiles - Hydrocolloid Dressing - Specification |
TXD 36 |
| 963 |
IS 3625 : Part 1 : 2020 |
Specification for Warp Tubes for Ring Spinning and Doubling Spindles Part 1 Specific Requirements ( Third Revision ) |
TXD 14 |
| 964 |
IS 4717 : 2020 |
Medical Textiles - Zinc Oxide Self-Adhesive Plaster - Specification ( Second Revision ) |
TXD 36 |
| 965 |
IS 4738 : 2020 |
Medical Textiles - Bandage, Plaster of Paris - Specification ( Third Revision ) |
TXD 36 |
| 966 |
IS 16302 : 2020 |
Medical Textiles — Orthopedic Stockinet — Specification ( First Revision ) |
TXD 36 |
| 967 |
IS 16466 : 2020 |
Medical Textiles - Povidone Iodine Ointment Based Knitted Dressing - Specification ( First Revision ) |
TXD 36 |
| 968 |
IS 16671 : 2020 |
Medical Textiles — Belladonna Adhesive Plaster — Specification ( First Revision ) |
TXD 36 |
| 969 |
IS 16534 : 2017 |
Chlorinated Polyvinyl Chloride (CPCV) Pipe Fittings for Automatic Sprinkler Fire Extinguishing System - Specification |
CED 22 |
| 970 |
IS 4605 : 1981 |
Specification for crepe bandage (First Revision) |
TXD 36 |
| 971 |
IS 17478 : 2020 |
Textile Floor Covering - Wall to Wall Carpets Made of Polyamide ( Nylon ) Yarn - Specification |
TXD 4 |
| 972 |
IS 17507 : 2020 |
Medical Textiles - Cellulose Wading - Specification |
TXD 36 |
| 973 |
IS 17508 : 2020 |
Disposable Adult Incontinence Diaper - Specification |
TXD 36 |
| 974 |
IS 4956 : 2020 |
Synthetic Detergents for Industrial Purposes — Specification ( Third Revision ) |
CHD 25 |
| 975 |
IS 6455 : 2020 |
Single Row Deep Groove Ball Bearings — Specification ( First Revision ) |
PGD 13 |
| 976 |
IS 9138 : 2020 |
Azotobacter Spp. Inoculants - Specification ( Third Revision ) |
FAD 7 |
| 977 |
IS 17293 : 2020 |
Electric Cables for Photovoltaic Systems for Rated Voltage 1 500 V d.c. |
ETD 9 |
| 978 |
IS 17402 : 2021 |
Cupric Oxide for Explosives and Pyrotechnic Composition - Specification |
CHD 26 |
| 979 |
IS 208 : 2020 |
Door Handles - Specification ( Sixth Revision ) |
CED 15 |
| 980 |
IS 12817 : 2020 |
Stainless Steel Butt Hinges - Specification ( Third Revision ) |
CED 15 |
| 981 |
IS 15834 : 2020 |
Stainless Steel Sliding Door Bolts ( Aldrops ) for Use With Padlocks - Specification ( First Revision ) |
CED 15 |
| 982 |
IS 11128 : 1984 |
Specification for spray - Applied hydrated calcium silicate thermal insulation |
CHD 27 |
| 983 |
IS 11552 : 2008 |
Liquid Nitrogen Vessels of Capacity up to 75 Litres |
MED 17 |
| 984 |
IS 13779 : 1999 |
AC static watihour meters, class 1 and 2 - Specification (First Revision) |
ETD 13 |
| 985 |
IS 15909 : 2020 |
PVC Geomembranes for Lining - Specification ( Second Revision ) |
TXD 30 |
| 986 |
IS 265 : 1993 |
Hydrochloric acid - Specification (Fourth Revision) |
CHD 1 |
| 987 |
IS 2508 : 1984 |
Low Density Polyethylene Films |
PCD 12 |
| 988 |
IS 341 : 1973 |
Black japan, Types A, B and C |
CHD 20 |
| 989 |
IS 11163 : 1985 |
Specification for first-aid dressings |
TXD 36 |
| 990 |
IS 11464 : 2011 |
Quartz for ceramic industry - Specification (First Revision) |
CHD 9 |
| 991 |
IS 534 : 2007 |
Benzene - Specification (Fourth Revision) |
PCD 3 |
| 992 |
IS 1151 : 2003 |
Refined sugar - Specification (Second Revision) |
FAD 2 |
| 993 |
IS 458 : 2003 |
Precast concrete pipes(With And Without Reinforcement) - Specification (Fourth Revision) |
CED 53 |
| 994 |
IS 5719 : 2005 |
Gelatin, Food Grade |
FAD 8 |
| 995 |
IS 9683 : 1980 |
Specification for carbon and low alloy steel forgings for fired and unfired pressure vessels |
MTD 16 |
| 996 |
IS 10631 : 1983 |
Specification for stainless steel for welding electrode core wire |
MTD 16 |
| 997 |
IS 10632 : Part 1 : 1983 |
Specification for non magnetic stainless steels for electrical applications: Part 1 general requirements |
MTD 16 |
| 998 |
IS 13347 : 2018 |
Clutch pencils ? Specification (First Revision) |
CHD 14 |
| 999 |
IS 11744 : 2020 |
Phosphorous Pentachloride, Technical - Specification ( First Revision ) |
CHD 1 |
| 1000 |
IS 4175 : 2018 |
Correcting fluid - Specification (Second Revision) |
CHD 14 |
| 1001 |
IS 517 : 2020 |
Specification for methanol (methyl alcohol) (Third Revision) |
PCD 9 |
| 1002 |
IS 11657 : 1986 |
Specification for phosphorus oxychloride, technical |
CHD 1 |
| 1003 |
IS 14697 : 1999 |
AC static transformer operated , watthour and var - Hour meters, class 0.2 S and 0.5 S - Specification |
ETD 13 |
| 1004 |
IS 4985 : 2000 |
Unplasticized pvc pipes for potable water supplies - Specification (Third Revision) |
CED 50 |
| 1005 |
IS 5758 : 1984 |
Precast Concrete Kerbs, Channels, Edgings, Quadrants and Gutter Aprons |
CED 53 |
| 1006 |
IS 6614 : 1972 |
Specification for aluminium chloride, anhydrous, technical |
CHD 1 |
| 1007 |
IS 7129 : 1992 |
Potassium carbonate, anhydrous - Specification (First Revision) |
CHD 1 |
| 1008 |
IS 13662 : 1993 |
Isabgol husk - Specification |
FAD 16 |
| 1009 |
IS 14740 : Part 3 : 2021 |
Pneumatic Fluid Power - Determination of Flow-Rate Characteristics of Components Using Compressible Fluids Part 3 Method for Calculating Steady-State Flow-Rate Characteristics of Systems ( First Revision ) |
PGD 36 |
| 1010 |
IS 16833 : 2018 |
Automotive Tracking Device (ATD) and Integrated Systems |
TED 28 |
| 1011 |
IS 1857 : 1972 |
Specification for tarred hemp marline, two-ply (first revision) |
TXD 9 |
| 1012 |
IS 4359 : 1967 |
Specification for kattha |
FAD 8 |
| 1013 |
IS 7082 : 1973 |
Specification for sisal lines |
TXD 9 |
| 1014 |
IS 12406 : 2003 |
Medium density fibre boards for general purpose - Specification (First Revision) |
CED 20 |
| 1015 |
IS 7298 : 1973 |
Specification for cotton webbing, proofed and unproofed |
TXD 39 |
| 1016 |
IS 7776 : 1975 |
Specification for silk webbing |
TXD 39 |
| 1017 |
IS 17269 : 2019 |
Identification, labelling and marking of Pashmina products |
TXD 4 |
| 1018 |
IS 6433 : 2021 |
Guniting Equipments - Specification (First Revision) |
MED 18 |
| 1019 |
IS/ISO 11607 : Part 1 : 2019 |
Packaging for terminally sterilized medical devices - Part 1: Requirements for materials sterile barrier systems and packaging systems First Revision |
MHD 12 |
| 1020 |
IS 6799 : 1987 |
Specification for padlocks, bicycle (First Revision) |
MED 33 |
| 1021 |
IS 6674 : 1972 |
Specification for cotton webbing for use in packing aero-engines |
TXD 13 |
| 1022 |
IS 6879 : 1973 |
Specification for fabric for target banner, radar responsive |
TXD 13 |
| 1023 |
IS 6900 : 1973 |
Specification for proofed nylon leno fabric |
TXD 13 |
| 1024 |
IS 8947 : 1978 |
Specification for material (nylon webbing) for aircraft safety belts |
TXD 13 |
| 1025 |
IS 17423 : 2020 |
Medical textiles – Coveralls for COVID 19 – Specification |
TXD 36 |
| 1026 |
IS 8075 : 1976 |
Specification for back coated carbon papers for typewriter |
CHD 14 |
| 1027 |
IS 2080 : 1980 |
Specification for stabilized hydrogen peroxide (First Revision) |
CHD 1 |
| 1028 |
IS 229 : 1993 |
Ethyl acetate - Specification (Third Revision) |
PCD 9 |
| 1029 |
IS 4581 : 1978 |
Specification for phosphorus trichloride, pure and analytical reagent (First Revision) |
CHD 1 |
| 1030 |
IS 7008 : Part 2 : 2021 |
ISO metric trapezoidal screw threads Part 2 General plan Second Revision IS 7008 Part 2 ISO 2902 : 2016 ICS 2106010 |
PGD 37 |
| 1031 |
IS 7008 : Part 4 : 2021 |
ISO metric trapezoidal screw threads Part 4 Tolerances Third Revision IS 7008 Part 4 ISO 2903 : 2016 ICS 2106010 |
PGD 37 |
| 1032 |
IS 9267 : 1979 |
Specification for tubular nylon webbing for aerospace purposes |
TXD 13 |
| 1033 |
IS 774 : 2004 |
Flushing cisterns for water closets and urinals (Other Than Plastic Cisterns) - Specification (Fifth Revision) |
CED 3 |
| 1034 |
IS 7231 : 1994 |
plastic flushing cisterns for waterclosets and urinals |
CED 3 |
| 1035 |
IS 747 : 1991 |
Handloom cotton bunting cloth, dyed – Specification (second revision) |
TXD 8 |
| 1036 |
IS 748 : 1990 |
Handloom cotton dhoties and saris – Specification (second revision) |
TXD 8 |
| 1037 |
IS 854 : 1991 |
Handloom cotton turkish honeycomb and huckaback towels and towelling cloth – Specification (second revision) |
TXD 8 |
| 1038 |
IS 12234 : 1988 |
plastic equilibrium float valve for cold water services |
CED 3 |
| 1039 |
IS 8931 : 1993 |
copper alloy fancy single taps, combination tap assembly and stop valves for water services |
CED 3 |
| 1040 |
IS 745 : 2003 |
Textiles – Handloom cotton bed sheets – Specification (third revision) |
TXD 8 |
| 1041 |
IS 5509 : 2021 |
Fire Retardant Plywood - Specification ( Third Revision ) |
CED 20 |
| 1042 |
IS 16143 : Part 1 : 2021 |
Hard coal and coke - Mechanical sampling : Part 1 general introduction (First Revision) |
PCD 7 |
| 1043 |
IS 1925 : 2016 |
Bidis - Specification (Fourth Revision) |
FAD 4 |
| 1044 |
IS 2344 : 1994 |
Flake type chewing tobacco (Zarda) - Specification (Second Revision) |
FAD 4 |
| 1045 |
IS 3041 : 1994 |
Minced type chewing tobacco - Specification (Second Revision) |
FAD 4 |
| 1046 |
IS 14647 : 1999 |
Tobacco and tobacco products - Quiwam - Specification |
FAD 4 |
| 1047 |
IS/IEC 61076 : Part 4 : Sec 108 : 2002 |
Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality -Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2.5 mm in accordance with IEC 60917-1 |
LITD 3 |
| 1048 |
IS/IEC 61076 : Part 4 : Sec 110 : 2001 |
Connectors for electronic equipment- Part 4-110: Printed board connectors with assessed quality Detail specification for latched cable connector system having a basic grid of 2.0 mm including full shielding and latching function |
LITD 3 |
| 1049 |
IS 3077 : 1992 |
Roasted and ground coffee specification (Second Revision) |
FAD 6 |
| 1050 |
IS/ISO 16929 : 2019 |
Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test First Revision |
PCD 27 |
| 1051 |
IS 5463 : 1969 |
Methods for sampling of cotton fabrics for chemical tests |
TXD 5 |
| 1052 |
IS 17577 : 2021 |
Reliability and availability evaluation of HVDC systems |
ETD 40 |
| 1053 |
IS 2791 : 1992 |
Soluble coffee powder - Specification (Third Revision) |
FAD 6 |
| 1054 |
IS 15450 : 2004 |
Polyethylene/aluminium/polyethylene composite pressure pipes for hot and cold water supplies - Specification |
CED 50 |
| 1055 |
IS 5354 : 1992 |
Textiles - Cotton stripping tape for electrical purposes - Specification (first revision) |
TXD 39 |
| 1056 |
IS 16369 : 2015 |
Textiles – Saris made of cotton, man-made fibres filaments and their blends – Specification |
TXD 31 |
| 1057 |
IS 16374 : 2015 |
Textiles – Woven suitings made of cotton man-made fibres filaments and their blends – Specification |
TXD 31 |
| 1058 |
IS 16394 : 2015 |
Textiles – Woven shirtings made of cotton man-made fibres filaments and their blends – Specification |
TXD 31 |
| 1059 |
IS 16289 : 2014 |
Medical textiles - Surgical face masks - Specification |
TXD 36 |
| 1060 |
IS 16290 : 2014 |
Medical textiles - Knitted viscose primary dressings - Specification |
TXD 36 |
| 1061 |
IS 16291 : 2014 |
Medical textiles - Paraffin gauze dressings - Specification |
TXD 36 |
| 1062 |
IS 16303 : 2014 |
Medical textiles - Cast padding for orthopaedic plaster - Specification |
TXD 36 |
| 1063 |
IS 16467 : 2016 |
Medical textiles – Graduated medical compression stockings – Specification |
TXD 36 |
| 1064 |
IS 16468 : 2016 |
Medical textiles – Absorbent cotton (Sterile and non-sterile) – Specification |
TXD 36 |
| 1065 |
IS 16469 : 2016 |
Medical textiles - Open weave bandages - Specification |
TXD 36 |
| 1066 |
IS 16470 : 2016 |
Medical textiles - Elastic surgical adhesive tapes - Specification |
TXD 36 |
| 1067 |
IS 16660 : 2017 |
Medical textiles - Nonwoven bandage rolls - Specification |
TXD 36 |
| 1068 |
IS 1166 : 1986 |
Specification for condensed milk, partly skimmed and skimmed condensed milk (Second Revision) |
FAD 19 |
| 1069 |
IS 1165 : 2002 |
Milk powder - Specification (fifth Revision) |
FAD 19 |
| 1070 |
IS 1152 : 2003 |
Icing sugar - Specification (Second Revision) |
FAD 2 |
| 1071 |
IS 1259 : 1984 |
Specification for vinyl coated fabrics (Third Revision) |
TXD 33 |
| 1072 |
IS 4439 : 1967 |
Specification for rayon velvet |
TXD 31 |
| 1073 |
IS 8698 : 1984 |
Specification for expanded vinyl coated fabrics (First Revision) |
TXD 33 |
| 1074 |
IS 11059 : 1984 |
Specification for cylindrical tubes for open-end spinning |
TXD 14 |
| 1075 |
IS 17261 : 2019 |
Textiles – Polyester continuous filament fully drawn yarns - Specification |
TXD 31 |
| 1076 |
IS 17263 : 2019 |
Textiles – Polyester staples fibres – Specification |
TXD 31 |
| 1077 |
IS/IEC 60603 : Part 3 : 1987 |
Connectors for frequencies below 3 MHz for use with printed boards Part 3: Two-part connectors for printed boards having contacts spaced at 2.54 mm(0.100 in)centres and staggered terminations at that same spacing |
LITD 3 |
| 1078 |
IS 2427 : 1968 |
Grading of continuous filament viscose rayon yarn and acetate yarn, bright and dull (first revision) |
TXD 31 |
| 1079 |
IS 3061 : 1979 |
Specification for pork sausages, fresh (First Revision) |
FAD 18 |
| 1080 |
IS 17262 : 2019 |
Textiles – Polyester partially oriented yarn (POY) – Specification |
TXD 31 |
| 1081 |
IS 17264 : 2019 |
Textiles – Polyester industrial yarn – Specification |
TXD 31 |
| 1082 |
IS 17648 : 2021 |
Guideline for distributed management system in the context of electrical utilities |
LITD 10 |
| 1083 |
IS 17669 : 2021 |
Infant formula and adult nutritionals Simultaneous determination of total vitamins B1 B2 B3 and B6 Enzymatic digestion and LC-MSMS |
FAD 28 |
| 1084 |
IS 17675 : Part 2 : 2021 |
Guidelines for Treated Wastewater Use for Irrigation Projects Part 2 Development of the Project |
CHD 32 |
| 1085 |
IS 1333 : 1978 |
Specification for ink, duplicating, for single drum rotary machine (Second Revision) |
CHD 14 |
| 1086 |
IS 16239 : 2021 |
Polyurethane Matt Finish ( TWO PACK) - Specification |
CHD 20 |
| 1087 |
IS 289 : 2021 |
Aluminium paste for paints - Specification (Second Revision) |
CHD 21 |
| 1088 |
IS 1060 : Part 5 : Sec 2 : 2021 |
Methods of Sampling and Test for Paper and Allied Products Part 5 Methods of Test for Paper and Board Section 2 Determination of moisture content of a lot Oven-drying method |
CHD 15 |
| 1089 |
IS 3450 : 1994 |
Carbon papers - Handwriting - Specification (Second Revision) |
CHD 14 |
| 1090 |
IS 14544 : 1998 |
Leather safety foot wear with direct moulded polyvinyl chloride (PVC) sole - Specification |
CHD 19 |
| 1091 |
IS 10582 : 1983 |
Specification for book binding cloth |
TXD 31 |
| 1092 |
IS 11873 : 1986 |
Specification for woven nylon fabric for umbrellas, water resistant |
TXD 31 |
| 1093 |
IS 1803 : 1973 |
Specification for cotton embroidery threads (first revision) |
TXD 31 |
| 1094 |
IS 415 : 2002 |
Shuttlecocks - Specification (Third Revision) |
PGD 41 |
| 1095 |
IS 5088 : 1982 |
Specification for cotton textiles for ammunition (first revision) |
TXD 31 |
| 1096 |
IS 5485 : 1980 |
Specification for cotton yarn waste (first revision) |
TXD 31 |
| 1097 |
IS 7867 : 1975 |
Specification for continuous filament textile polyamide (nylon) yarn |
TXD 31 |
| 1098 |
IS 3192 : 1984 |
Specification for cotton calico for electric cables (first revision) |
TXD 31 |
| 1099 |
IS/IEC 60721 : Part 3 : Sec 2 : 2018 |
Classification of Environmental Conditions Part 3 Classification of groups of environmental parameters and their severities Section 1 Transportation and Handling |
LITD 1 |
| 1100 |
IS 3040 : 1980 |
Specification for Indian kapok (first revision) |
TXD 31 |
| 1101 |
IS 3776 : 1994 |
Textiles – Bed sheets, cotton khadi, bleached – Specification (first revision) |
TXD 8 |
| 1102 |
IS 5508 : Part 18 : 2021 |
Guide for fishing gear Part 18: 50 m Bulged belly trawl net (first revision) |
TXD 18 |
| 1103 |
IS 6762 : 1986 |
SpeciflCation for drinking chocolate (Sweetened Cocoa Powder) (Second Revision) |
FAD 6 |
| 1104 |
IS 13463 : 1992 |
Polyamide(Nylon 6) materials for moulding and extrusion specification |
PCD 12 |
| 1105 |
IS 2095 : Part 2 : 2001 |
Gypsum plaster boards - specification: Part 2 coated/laminated gypsum plaster boards |
CED 4 |
| 1106 |
IS 2095 : Part 3 : 2018 |
Gypsum Plaster Boards — Specification Part 3 Reinforced Gypsum Plaster Boards, Tiles, Cornices and Mouldings ( Third Revision ) |
CED 4 |
| 1107 |
IS 5321 : 1969 |
Specification for soda lime (As Carbon Dioxide Absorbent) |
CHD 1 |
| 1108 |
IS 12068 : 1987 |
Specification for rice bran fatty acids |
FAD 13 |
| 1109 |
IS 7813 : 1975 |
Specification for box, aluminium, rectangular |
MED 33 |
| 1110 |
IS 10258 : Part 3 : 2021 |
Sterile hypodermic syringes for single use Part 3 Auto-disabled syringes for fixed-dose immunization First Revision |
MHD 12 |
| 1111 |
IS 12178 : 1987 |
Specification for acetylene, black |
CHD 1 |
| 1112 |
IS 7257 : 1973 |
Specification for trunks, steel, domestic |
MED 33 |
| 1113 |
IS 1781 : 1975 |
Specification for urea, technical (First Revision) |
PCD 9 |
| 1114 |
IS 5994 : 1998 |
Agricultural Tractors - Test Code (Third Revision) |
FAD 11 |
| 1115 |
IS 17647 : Part 2 : 2021 |
Biotechnology - Ancillary materials present during the production of cellular therapeutic products Part 2: Best practice guidance for ancillary material suppliers |
MHD 20 |
| 1116 |
IS 778 : 1984 |
Specification for copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision) |
CED 3 |
| 1117 |
IS 17743 : Part 2 : Sec 1 : 2021 |
Software Engineering Lifecycle profiles for Very Small Entities VSEs Part 2: Framework and taxonomy |
LITD 14 |
| 1118 |
IS 4399 : 1967 |
Specification for nylon fabrics for industrial and special purposes |
TXD 33 |
| 1119 |
IS 8164 : 1976 |
Specification for hospital rubber sheeting without reinforcing fabric |
TXD 33 |
| 1120 |
IS 16240 : 2015 |
Reverse Osmosis (RO) Based Point-Of-Use (POU) Water Treatment System - Specification |
FAD 30 |
| 1121 |
IS 2052 : 2009 |
Compounded feeds for cattle - Specification (Fourth Revision) |
FAD 5 |
| 1122 |
IS 1747 : 1972 |
Specification for nitrogen (First Revision) |
CHD 6 |
| 1123 |
IS 5464 : 1995 |
Citric acid, monohydrate - Specification |
PCD 9 |
| 1124 |
IS 7610 : Part 1 : 1975 |
Specification for machinery fabrics, wool – Part 1 General |
TXD 33 |
| 1125 |
IS 8991 : 1978 |
Specification for nylon fabric for sleeping bags |
TXD 37 |
| 1126 |
IS 17614 : Part 10 : 2021 |
WATER QUALITY - SAMPLING Part 10 Guidance on sampling of waste waters |
CHD 36 |
| 1127 |
IS 17614 : Part 13 : 2021 |
Water quality Sampling Part 13: Guidance on sampling of sludges |
CHD 36 |
| 1128 |
IS 4105 : 2020 |
Specification for Styrene ( Vinyl Benzene ) ( Second Revision ) |
PCD 9 |
| 1129 |
IS 7466 : 1994 |
Rubber gaskets for pressure cookers - Specifications (First Revison) |
PCD 13 |
| 1130 |
IS 718 : 1977 |
Specification for carbon tetrachloride (Second Revision) |
PCD 9 |
| 1131 |
IS 17479 : 2020 |
Textile Floor Covering - Carpet Tiles Made of Polyamide ( Nylon ) Yarn - Specification |
TXD 4 |
| 1132 |
IS 6001 : 1971 |
Specification for flyer spindles |
TXD 14 |
| 1133 |
IS 11990 : 1986 |
Specification for gas washing bottles |
CHD 10 |
| 1134 |
IS 10908 : 1991 |
Flexible rubber tubing for liquefied petroleum gas - Specification (First Revision) |
PCD 13 |
| 1135 |
IS 13289 : 1993 |
Polypropylene/impact copolymer (Ppcp) crates for milk satchets - Specification |
PCD 21 |
| 1136 |
IS 12540 : 1988 |
Specification for acrylonitrile |
PCD 9 |
| 1137 |
IS 14434 : 1998 |
Polycarbonate moulding and extrusion materials - Specification |
PCD 12 |
| 1138 |
IS 6351 : 1971 |
Specification for unhairing and scudding knife for leather industry |
CHD 17 |
| 1139 |
IS 6369 : 1971 |
Specification for fleshing knife for leather industry |
CHD 17 |
| 1140 |
IS 1070 : 1992 |
Reagent grade water - Specification (Third Revision) |
CHD 13 |
| 1141 |
IS 853 : 1964 |
Specification for bone - Meal, raw (Revised) |
FAD 7 |
| 1142 |
IS 1235 : 1988 |
Specification for acetic anhydride (First Revision |
PCD 9 |
| 1143 |
IS 9909 : 1981 |
Specification for succinic acid for electroless plating |
CHD 5 |
| 1144 |
IS 12846 : 1989 |
Boric acid, photographic grade - Specification |
CHD 5 |
| 1145 |
IS 17265 : 2019 |
Textiles – 100 percent polyester spun grey and white yarn – Specification |
TXD 31 |
| 1146 |
IS 16616 : 2022 |
Hard coal - Audibert-arnu dilatometer test (First Revision) |
PCD 7 |
| 1147 |
IS 17106 : Part 3 : 2022 |
Lifts Elevators Escalators and Moving Walks Programmable Electronic Systems in Safety Related Applications Part 3 Life Cycle Guideline for Programmable Electronic Systems related to PESSRAL and PESSRAE |
ETD 25 |
| 1148 |
IS 12950 : 1990 |
Battery hydrometer - Portable syringe type for lead - acid batteries - Specification |
CHD 10 |
| 1149 |
IS 17805 : Part 1 : 2022 |
Electrical Requirements for Lifts Escalators and Moving Walks Part 1 Electromagnetic Compatibility With Regard To Emission |
ETD 25 |
| 1150 |
IS 1163 : 1992 |
Chocolates - Specification (Second Revision) |
FAD 6 |
| 1151 |
IS 644 : 1992 |
Dipentene for paints - Specification (Second Revision) |
CHD 21 |
| 1152 |
IS 2522 : 1984 |
Specification for knitted worsted mufflers (first revision) |
TXD 10 |
| 1153 |
IS 2699 : 1982 |
Specification for flats and flats' screws (first revision) |
TXD 14 |
| 1154 |
IS 10598 : 1997 |
Textile machinery – Guide rollers for dyeing and finishing machinery – Specification (first revision) |
TXD 14 |
| 1155 |
IS 4972 : Part 7 : 2022 |
Resistance Spot Welding Part 7 Electrode Taper Fits For Spot Welding Equipment -- Dimensions (First Revision of IS 4972) |
MTD 11 |
| 1156 |
IS 4910 : Part 9 : 1978 |
Methods of test for tyre yarns, cords and tyre cord fabrics made from man-made fibres Part 9 Sampling for tyre yarns, cords and tyre cord fabrics made from rayon |
TXD 38 |
| 1157 |
IS 254 : 1973 |
Specification for magnesium chloride (Second Revision) |
CHD 1 |
| 1158 |
IS 393 : 1985 |
Specification for ink, stamp - Pad (Third Revision) |
CHD 14 |
| 1159 |
IS 673 : 1987 |
Specification for cloth, woollen, twill, dyed (third revision) |
TXD 4 |
| 1160 |
IS 1221 : 1991 |
Fountain pen ink - Dye based - Specification (Second Revision) |
CHD 14 |
| 1161 |
IS 4747 : 1986 |
Specification for pads for rubber stamps (Second Revision) |
CHD 14 |
| 1162 |
IS 6831 : 1992 |
Caustic potash - Specification (Second Revision) |
CHD 1 |
| 1163 |
IS 10560 : 1983 |
Specification for jotter ball pen refills |
CHD 14 |
| 1164 |
IS 12131 : 2005 |
Textiles – Worsted suitings – Specification (first revision) |
TXD 4 |
| 1165 |
IS 10559 : 1983 |
Specification for jotter ball point pens |
CHD 14 |
| 1166 |
IS 2319 : 1987 |
Specification for serge (third revision) |
TXD 4 |
| 1167 |
IS 8430 : 1977 |
Specification for nylon fabrics for inflatable equipment |
TXD 37 |
| 1168 |
IS 2697 : 1976 |
Specification for ammonium bicarbonate for food industry (First Revision) |
FAD 8 |
| 1169 |
IS 6605 : 1972 |
Specification for potassium chromate |
CHD 1 |
| 1170 |
IS 7541 : 1974 |
Specification for stabilized liquid sulphur trioxide |
CHD 1 |
| 1171 |
IS 8642 : 1977 |
Specification for dyes for water - Based writing inks |
CHD 14 |
| 1172 |
IS 12008 : 1986 |
Specification for silica gel, chromatographic grade |
CHD 1 |
| 1173 |
IS 2136 : 1988 |
Woven flat lining fabrics for apparels – Specification (second revision) |
TXD 31 |
| 1174 |
IS 9393 : 1979 |
Code of manufacturing worsted, semi-worsted and woollen yarns and tolerances |
TXD 4 |
| 1175 |
IS 2095 : Part 1 : 2011 |
Gypsum plaster boards - Specification: Part 1 plain gypsum plaster boards |
CED 4 |
| 1176 |
IS 296 : 1986 |
Specification for sodium carbonate, anhydrous (Third Revision) |
CHD 1 |
| 1177 |
IS 384 : PART 2 : 2012 |
Brushes, paints and varnishes, flat - Specification: Part 2 household purposes (Sixth Revision) |
CHD 23 |
| 1178 |
IS 8331 : 2003 |
Textiles – Angola shirting – Specification (second revision) |
TXD 4 |
| 1179 |
IS 6307 : 1985 |
Specification for rigid pvc sheets (First Revision) |
PCD 12 |
| 1180 |
IS 573 : 1992 |
Trisodium phosphate - Specification (Fourth Revision) |
CHD 1 |
| 1181 |
IS 711 : 1970 |
Specification for ferric choride, technical (First Revision) |
CHD 1 |
| 1182 |
IS 799 : 1985 |
Specification for ammonia, liquor (Second Revision) |
CHD 1 |
| 1183 |
IS 2124 : 2000 |
Sodium bicarbonate - Specification (Second Revision) |
CHD 1 |
| 1184 |
IS 2142 : 1992 |
Bromine, technical - Specification (Third Revision) |
CHD 1 |
| 1185 |
IS 3401 : 1992 |
Silica gel - Specification (Third Revision) |
CHD 1 |
| 1186 |
IS 11569 : 1986 |
Specification for cervical collar |
MHD 2 |
| 1187 |
IS 8590 : 1977 |
Specification for indium sulphate for electroplating |
CHD 5 |
| 1188 |
IS 9827 : 1981 |
Specification for shoe adhesive, natural rubber latex base |
PCD 12 |
| 1189 |
IS 11434 : 1985 |
Specification for ionomer resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water z |
PCD 12 |
| 1190 |
IS 11704 : 1986 |
Specification for ethylene acrylic acid (Eaa) copolymers for their safe use in contact with food - Stuffs, pharmaceuticals and drinking water |
PCD 12 |
| 1191 |
IS 12210 : 1987 |
Specification for caprolactam |
PCD 12 |
| 1192 |
IS 309 : 2005 |
Compressed oxygen gas - Specification (Fourth Revision) |
CHD 6 |
| 1193 |
IS 3025 : Part 31 : Sec 2 : 2022 |
Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater Part 31 Phosphorus Section 2 Determination of Orthophoshate and Total Phosphorous Contents by Flow Analysis (FIA and CFA) - Method by Flow Injection Analysis (FIA) |
CHD 36 |
| 1194 |
IS 2347 : 2017 |
Domestic pressure cooker - Specification (Sixth Revision) |
MED 33 |
| 1195 |
IS 4739 : 1986 |
Specification for zinc oxide elastic self-adhesive bandage (first revision) |
TXD 36 |
| 1196 |
IS 9287 : 1979 |
Specification for wooden shuttle blocks for pirn-changing automatic looms |
TXD 14 |
| 1197 |
IS 758 : 1988 |
Specification for cotton gauze, absorbent, non-sterilized (fourth revision) |
TXD 36 |
| 1198 |
IS 797 : 1982 |
Specification for common salt for chemical industries (Third Revision) |
CHD 1 |
| 1199 |
IS 9591 : 1996 |
Plasticizer esters - Methods of sampling and tests (First Revision) |
PCD 27 |
| 1200 |
IS 9751 : 1981 |
Specification for bandage, suspensory |
TXD 36 |
| 1201 |
IS 9280 : 1979 |
Specification for wooden shuttle blocks for non-automatic looms |
TXD 14 |
| 1202 |
IS 6931 : 1972 |
Methods of test for printing inks |
CHD 14 |
| 1203 |
IS 4909 : 1990 |
Card and gill pins for use in jute industry – Specification (first revision) |
TXD 14 |
| 1204 |
IS 16172 : 2014 |
Reinforcement couplers for mechanical splices of bars in concrete - Specification |
CED 54 |
| 1205 |
IS 14433 : 2022 |
INFANT MILK SUBSTITUTES - SPECIFICATION (Second Revision of IS 14433) |
FAD 19 |
| 1206 |
IS 3566 : 1966 |
Specification for viscose rayon cut staple (spun) yarn |
TXD 31 |
| 1207 |
IS 14587 : 1998 |
Prelaminated Medium Density Fibre Board -specification |
CED 20 |
| 1208 |
IS 14223 : Part 1 : 1995 |
Polished Building Stones: Part 1 Granite |
CED 6 |
| 1209 |
IS 4493 : Part 2 : 2022 |
Hollow Metallic Waveguides Part 2 Relevant specifications for ordinary rectangular waveguides First Revision |
LITD 6 |
| 1210 |
IS 889 : 1991 |
Handloom worsted bunting cloth (first revision) |
TXD 8 |
| 1211 |
IS 891 : 1991 |
Handloom worsted shirting (first revision) |
TXD 8 |
| 1212 |
IS 893 : 1991 |
Handloom woollen blankets, plain or checked (first revision) |
TXD 8 |
| 1213 |
IS 894 : 1980 |
Specification for handloom wool blankets, brick red (first revision) |
TXD 8 |
| 1214 |
IS 895 : 1991 |
Handloom woollen blanketing cloth (first revision) |
TXD 8 |
| 1215 |
IS 1095 : 1991 |
Handloom cotton dress material, bleached, dyed, printed, striped or checked (first revision) |
TXD 8 |
| 1216 |
IS 1099 : 1991 |
Handloom cotton lining cloth, dyed – Specification (first revision) |
TXD 8 |
| 1217 |
IS 1266 : 1991 |
Handloom serge (first revision) |
TXD 8 |
| 1218 |
IS 1450 : 1991 |
Handloom cotton DURRIES – Specification (second revision) |
TXD 8 |
| 1219 |
IS 1814 : 1990 |
Handloom cotton mootus, striped or checked – Specification (first revision) |
TXD 8 |
| 1220 |
IS 2160 : 1991 |
Textiles – Handloom viscose staple fibre coating – Specification (first revision) |
TXD 8 |
| 1221 |
IS 2172 : 1991 |
Textiles – Handloom filament rayon SARIS – Specification (first revision) |
TXD 8 |
| 1222 |
IS 2714 : 1991 |
Handloom pile fabric – Specification (first revision) |
TXD 8 |
| 1223 |
IS 2715 : 1991 |
Handloom woollen collar cloth white (first revision) |
TXD 8 |
| 1224 |
IS 4629 : 1994 |
Textiles – Blankets, wool khadi – Specification (first revision) |
TXD 8 |
| 1225 |
IS 8039 : 1991 |
Handloom cotton mix SARIS – Specification (first revision) |
TXD 8 |
| 1226 |
IS 751 : 1984 |
Specification for handloom cotton mazri cloth (loomstate) (first revision) |
TXD 8 |
| 1227 |
IS 752 : 1984 |
Specification for handloom cotton muslin, bleached (first revision) |
TXD 8 |
| 1228 |
IS 755 : 1984 |
Specification for handloom cotton MALMAL (first revision) |
TXD 8 |
| 1229 |
IS 756 : 1984 |
Specification for handloom cotton DOSUTI and DED-SUTI grey scoured, bleached or dyed (first revision) |
TXD 8 |
| 1230 |
IS 862 : 1990 |
Handloom cotton ticking cloth – Specification (first revision) |
TXD 8 |
| 1231 |
IS 864 : 1990 |
Handloom cotton light sheeting – Specification (first revision) |
TXD 8 |
| 1232 |
IS 896 : 1991 |
Handloom woollen kamblies, loomstate (first revision) |
TXD 8 |
| 1233 |
IS 1244 : 1990 |
Handloom cotton long cloth – Specification (first revision) |
TXD 8 |
| 1234 |
IS 1245 : 1990 |
Handloom cotton pyjama cloth, grey – Specification (first revision) |
TXD 8 |
| 1235 |
IS 2173 : 1991 |
Handloom shoddy Melton cloth (first revision) |
TXD 8 |
| 1236 |
IS 2159 : 1991 |
Textile – Handloom viscose staple fibre shirting – Specification (first revision) |
TXD 8 |
| 1237 |
IS 384 : PART 1 : 2012 |
Brushes, paints and varnishes, flat - Specification: Part 1 heavy duty (Sixth Revision) |
CHD 23 |
| 1238 |
IS 2157 : 1991 |
Handloom shoddy woollen blankets (first revision) |
TXD 8 |
| 1239 |
IS 11084 : 1984 |
Specification for silver palladium alloy wire and strip for electrical contacts |
MTD 10 |
| 1240 |
IS 16673 : 2017 |
Textiles – Handloom polyester viscose/cotton blended woven suiting for uniforms – Specification |
TXD 8 |
| 1241 |
IS 7959 : 1987 |
Specification for polyethylene containers for foam compounds (First Revision) |
PCD 21 |
| 1242 |
IS 863 : 1988 |
Specification for cotton bandage cloth, non-sterilized (second revision) |
TXD 36 |
| 1243 |
IS 9139 : 1979 |
Specification for malleable iron shots and grits for use in foundries |
MTD 14 |
| 1244 |
IS/ISO 9994 : 2018 |
Lighters Safety specifications First Revision |
MED 23 |
| 1245 |
IS 6192 : 1994 |
Textiles – Monoaxially oriented high density polyethylene tapes – Specification (second revision) |
TXD 23 |
| 1246 |
IS 11273 : 1992 |
Woven roving fabrics of 'E' glass fibre |
TXD 40 |
| 1247 |
IS 17725 : 2022 |
PRECAST CONCRETE CIRCULAR MANHOLE SPECIFICATION |
CED 53 |
| 1248 |
IS 8143 : 1976 |
Specification for plugs and keys for resistatice boxes |
ETD 12 |
| 1249 |
IS 9051 : 1979 |
Specification for rheostats |
ETD 12 |
| 1250 |
IS 1503 : 1988 |
wooden packing cases |
CED 9 |
| 1251 |
IS 7698 : 1983 |
Specification for returnable wooden crates for vegetables |
CED 9 |
| 1252 |
IS 11533 : 1985 |
Specification for sheep dressing hooks |
FAD 18 |
| 1253 |
IS 11631 : 1985 |
Specification for gambrels for sheep and goats |
FAD 18 |
| 1254 |
IS 12171 : 2019 |
Cotton bales – Specification (third revision) |
TXD 31 |
| 1255 |
IS 6782 : 1972 |
Specification for hog gambrels |
FAD 18 |
| 1256 |
IS 12189 : 1987 |
Specification for sheep spreaders |
FAD 18 |
| 1257 |
IS 1583 : 1991 |
Handloom silk dhotis and printed saris – Specification (first revision) |
TXD 28 |
| 1258 |
IS 5437 : 1994 |
Figured, rolled and wired glass - Specification (First Revision) |
CHD 10 |
| 1259 |
IS 7509 : 1993 |
Thermal insulating cements - - Specification (First Revision) |
CHD 27 |
| 1260 |
IS 9842 : 1994 |
Preformed fibrous pipe insulation - Specification (First Revision) |
CHD 27 |
| 1261 |
IS 11320 : 1997 |
Glass fibre rovings for the reinforcement of polyester and of epoxide resin systems - Specification (First Revision) |
TXD 40 |
| 1262 |
IS 11551 : 1996 |
Glass fibre chopped strand mat for the reinforcement of epoxy, phenolic and polyesterresin systems - Specification (First Revision) |
TXD 40 |
| 1263 |
IS 8154 : 1993 |
Preformed calcium silicate insulation (For Temperatures Up To 650°C) - Specification (First Revision) |
CHD 27 |
| 1264 |
IS 12637 : 1988 |
Woven upholstery fabrics - Plain, tufted or flocked - Specification |
TXD 31 |
| 1265 |
IS 11199 : 1985 |
Specification for HDPE monofilament twine door nets |
TXD 9 |
| 1266 |
IS 12658 : 1989 |
Grinding media rolled/forged carbon and Carbon - Chromium steels - Specification |
MTD 16 |
| 1267 |
IS 13959 : 1994 |
Polypropylene sutll - Specification |
TXD 9 |
| 1268 |
IS 5454 : 1978 |
Methods for sampling of clay building bricks (First Revision) |
CED 30 |
| 1269 |
IS 12786 : 1989 |
Irrigation Equipment - Polyethylene Pipes for Irrigation Laterals - Specification |
FAD 17 |
| 1270 |
IS 13428 : 2005 |
Packaged Natural Mineral Water - Specification (Second Revision) |
FAD 14 |
| 1271 |
IS 14543 : 2016 |
Packaged Drinking Water (Other Than Packaged Natural Mineral Water) - Specification (Second Revision) |
FAD 14 |
| 1272 |
IS 4910 : Part 12 : 1981 |
Methods of test for tyre yarns, cords and tyre cord fabrics made from man-made fibres Part 12 Sampling for tyre yarns, cords and tyre cord fabrics made from polyamide |
TXD 38 |
| 1273 |
IS 1374 : 2007 |
Poultry feeds - Specification (Fifth Revision) |
FAD 5 |
| 1274 |
IS 1265 : 1991 |
Handloom woollen tweed (first revision) |
TXD 8 |
| 1275 |
IS 256 : 1972 |
Specification for glauber salt (Sodium Sulphate, Decahydrate), technical first revision) |
CHD 1 |
| 1276 |
IS 381 : 1995 |
Sodium silicate - Specification (Second Revision) |
CHD 1 |
| 1277 |
IS 505 : 1995 |
Light kaolin - Specification (Third Revision) |
CHD 1 |
| 1278 |
IS 567 : 1993 |
Disodium phosphate, anhydrous - Specification (Second Revision) |
CHD 1 |
| 1279 |
IS 6053 : Part 2 : 1971 |
Specification for hand tools for footwear industry: Part 2 bottom cutting knife (Rampi) |
CHD 19 |
| 1280 |
IS 6053 : Part 3 : 1971 |
Handtools for footwear industry: Part 3 Designers' knife |
CHD 19 |
| 1281 |
IS 11308 : 1985 |
Specification for hydraulic setting thermal insulating castables for temperatures up to 1 250°C |
CHD 27 |
| 1282 |
IS 11782 : 1986 |
Specification for sodium cyanide, technical |
CHD 1 |
| 1283 |
IS 13297 : 1993 |
Women’s and girl’s woven dress fabrics made of man-made fibres and their blends – Specification |
TXD 31 |
| 1284 |
IS 14170 : 1994 |
Respiratory Protective Devices Mouthpiece Assemblies - Specification |
CHD 8 |
| 1285 |
IS 15751 : 2007 |
Calcite for ceramic industry - Specification |
CHD 9 |
| 1286 |
IS 13055 : 1991 |
Methods of sampling and test for anaerobic adhesives and sealants |
PCD 27 |
| 1287 |
IS 574 : 1989 |
Glassy sodium metaphosphate specification (Fourth Revision) |
CHD 1 |
| 1288 |
IS 2978 : 1986 |
Specification for by - Products of lac (First Revision) |
CHD 23 |
| 1289 |
IS 5296 : 1995 |
Chloroform, Pure and Technical - Specification (Second Revision) |
PCD 9 |
| 1290 |
IS 7654 : 1987 |
Specification for rubber hose for chemicals (First Revision) |
PCD 13 |
| 1291 |
IS 9428 : 1993 |
Preformed calcium silicate insulation (For Temperature Up To 950°C) - Specification (First Revision) |
CHD 27 |
| 1292 |
IS 260 : 2001 |
Aluminium sulphate, non - Ferric - Specification (Second Revision) |
CHD 1 |
| 1293 |
IS 571 : 2000 |
Monosodium phosphate specification (Second Revision) |
CHD 1 |
| 1294 |
IS 12580 : Part 1 : 1989 |
Glass thermometers for precision use - Specification: Part 1 solid - Stem thermometers |
CHD 10 |
| 1295 |
IS 7394 : 1984 |
Specification for plastics containers for reserve fuel (First Revision) |
PCD 21 |
| 1296 |
IS 9276 : 1979 |
Specification for brushes, horse |
CHD 23 |
| 1297 |
IS 12345 : 1988 |
Specification for vinyl acetate monomer |
PCD 9 |
| 1298 |
IS 2480 : Part 1 : 1983 |
Specification for general purpose glass thermometers: Part 1 solid - Stem thermometers (Second Revision) |
CHD 10 |
| 1299 |
IS 14364 : 1996 |
Quarternary ammonium compound based surface cleaner, liquid - Specification |
CHD 25 |
| 1300 |
IS 4992 : 1975 |
Specification for door handles for mortice locks (Vertical Type) (First Revision) |
CED 15 |
| 1301 |
IS 3441 : 2022 |
Solvent Extracted Groundnut Oil Cake as Livestock Feed Ingredient � Specification |
FAD 5 |
| 1302 |
IS 6053 : Part 1 : 1970 |
Specification for hand tools for footwear industry: Part 1 upper clicking knife |
CHD 19 |
