| SNo |
IS Number |
Title |
Technical Committee |
|
1 |
IS 228 : 1959 |
Methods of chemical analysis of pig iron, cast iron and plain carbon and low alloy steel |
MTD 7 |
|
2 |
IS 1762 : Part 1 : 1974 |
Code for designation of steels: Part 1 based on letter symbols (First Revision) |
MTD 4 |
|
3 |
IS 1500 : 2005 |
Method for Brinell Hardness Test for Metallic Materials |
MTD 3 |
|
4 |
IS 1956 : Part 1 : 1976 |
Glossary of terms relating to iron and steel: Part 1 general metallurgy, heat treatment and testing (First Revision) |
MTD 22 |
|
5 |
IS 1956 : Part 2 : 2018 |
Glossary of terms relating to iron and steel: Part 2 steel making (Second Revision) |
MTD 4 |
|
6 |
IS 1956 : Part 3 : 2019 |
Glossary of terms relating to iron and steel: Part 3 long products (Including Bars, Rods, Sections And Wires) (Second Revision) |
MTD 4 |
|
7 |
IS 1956 : Part 4 : 2013 |
Glossary of terms relating to iron and steel: Part 4 flat products (Second Revision) |
MTD 4 |
|
8 |
IS 1956 : Part 5 : 1976 |
Glossary of terms relating to iron and steel: Part V bright steel bar and steel wire (First Revision) |
MTD 4 |
|
9 |
IS 1956 : Part 6 : 1976 |
Glossary of terms relating to iron and steel: Part 6 forging (Including Drop Forging) (First Revision) |
MTD 16 |
|
10 |
IS 1956 : Part 7 : 1976 |
Glossary of terms relating to iron and steel: Part 7 wrought iron (First Revision) |
MTD 6 |
|
11 |
IS 1956 : Part 8 : 1976 |
Glossary of terms relating to iron and steel: Part 8 steel tubes and pipes (First Revision) |
MTD 19 |
|
12 |
IS 3664 : 1981 |
Code of practice for ultrasonic pulse echo testing by contact and immersion methods (first revision) |
MTD 21 |
|
13 |
IS 3711 : 2020 |
Steel and Steel Products — Location and Preparation of Samples and Test Pieces for Mechanical Testing ( Third Revision ) |
MTD 3 |
|
14 |
IS 8910 : 2010 |
General technical delivery requirements for steel and steel products (First Revision) |
MTD 4 |
|
15 |
IS 10138 : 2010 |
Macroscopic methods for determination of non-metallic inclusion content in wrought steels (Second Revision) |
MTD 22 |
|
16 |
IS 10138 : Part 1 : 1992 |
Macroscopic Method For Determination Of Non-metallic Inclusion Content In Wrought Steels Part 1 Blue Fracture Test Method |
MTD 22 |
|
17 |
IS 10138 : Part 2 : 1983 |
Macroscopic Methods for Determination of Non-metallic Inclusion Contents in Wrought Steels - Part 2 : Step Machined Test Method |
MTD 22 |
|
18 |
IS 10138 : Part 3 : 1983 |
Macroscopic Methods for Determination of Non-metallic Inclusion Content in Wrought Steels - Part 3 : Magnetic Particle Inspection Method |
MTD 22 |
|
19 |
IS 11371 : 1985 |
Method for macroetch test of wrought steel products |
MTD 22 |
|
20 |
IS 12211 : 1987 |
Specification for micrographic method for assessing the distribution of carbides in tool steels and bearing steels using reference photomicrographs |
MTD 22 |
|
21 |
IS 228 : Part 1 : 1987 |
Methods for chemical analysis ofsteels: Part 1 determination ofcarbon by volumetric method (For Carbon 0.05to 2.50 Percent) (Third Revision) |
MTD 34 |
|
22 |
IS 228 : Part 2 : 1987 |
Methods for chemical analysis of steels part 2 determination of manganese in plain - Carbon and low alloy steels by arsenite method (Third Revision) |
MTD 34 |
|
23 |
IS 228 : Part 3 : 1987 |
Methods for chemical analysis 6f steels: Part 3 determination of phosphorus by alkalimetric method (Third Revision |
MTD 34 |
|
24 |
IS 228 : Part 4 : 1987 |
Method for chemical analysis of steels: Part 4 determination of total carbon by gravimetric method (For Carbon R 0.1 Percent) (Third Revision) |
MTD 34 |
|
25 |
IS 228 : Part 5 : 1987 |
Methods for chemical analysis of steels: Part 5 determination of nickel by dimethylglyoxime (Gravimetric) method (For Nickel)O - l percent) (Third Revision) |
MTD 34 |
|
26 |
IS 228 : Part 6 : 1987 |
Methods for chemical analysis of steels: Part 6 determination of - Chromium by persulphate oxidation method (For Chromium)04 percent) (Third Revision) |
MTD 34 |
|
27 |
IS 228 : Part 7 : 1990 |
Methods for chemical analysis of steels: Part 7 determination of molybdenum by alpha - Benzoinoxime method in alloy steels (For molybdenum 1 percent and not containing tungsten) (Third Revision) |
MTD 34 |
|
28 |
IS 228 : Part 8 : 1989 |
Methods for chemicalanalysisofsteels: Part 8 determination of silicon by the gravimetric method (For Silicon 0.05 To 5.00 Percent) (Third Revision) |
MTD 34 |
|
29 |
IS 228 : Part 9 : 1989 |
Methods for chemical analysis of steels : Part 9 determination of sulphur by evolution method (For Sulphur 0.01 To 0.25 Percent) (Third Revision) |
MTD 34 |
|
30 |
IS 228 : Part 10 : 1989 |
Methods for chemical analysis of steels: Part 10 determination of molybdenum by thiocyanate (Photometric) method in low and high alloy steels (For Molybdenum 0.01 To 1.50 Percent) (First Revision) |
MTD 34 |
|
31 |
IS 228 : Part 11 : 1990 |
Methods for chemical analysis of steels : Part 11 determination of total silicon by reduced molybdosilicate spectrophotometric method in carbon steels and low alloy steels (For Silicon 0.01 To 0.05 Percent) (Third Revision) |
MTD 34 |
|
32 |
IS 228 : Part 12 : 2001 |
Methods for chemical of steels analysis: Part 12 determination of manganese by periodate spectrophotometric method in plain carbon, low alloy and high alloy steels (For Manganese 0.01 To 5.0 Percent) (Fourth Revision) |
MTD 34 |
|
33 |
IS 228 : Part 13 : 1982 |
Methods for chemical analysis of steels: Part 13 determination of arsenic |
MTD 34 |
|
34 |
IS 228 : Part 14 : 1988 |
Methods for chemical analysis of steels: Part 14 determination of carbon by thermal conductivity method (For Carbon 0.005 To 2.000 Percent |
MTD 34 |
|
35 |
IS 228 : Part 15 : 1992 |
Methods for chemical analysis of steels: Part 15 determination of copper by thiosulphate iodide method (For Copper 0.05 To 5 Percent) (Second Revision) |
MTD 34 |
|
36 |
IS 228 : Part 16 : 1992 |
Methods for chemical analysis of steels: Part 16 determination of tungsten by spectrophotometric method (For Tungsten 0.1 To 2 Percent) (Second Revision) |
MTD 34 |
|
37 |
IS 228 : Part 17 : 1998 |
Methods for chemical analysis of steels: Part 17 determination of nitrogen by thermal conductivity method (For Nitrogen Up To 0.04 Percent) (Second Revision) |
MTD 34 |
|
38 |
IS 228 : Part 18 : 1998 |
Methodsofchemicalanalysis ofsteels: Part 18 determination of oxygen by instrumental method (For Oxygen 0.001 To 0.1000 Percent) (Second Revision) |
MTD 34 |
|
39 |
IS 228 : Part 19 : 1998 |
Methods of chemical analysis of steels: Part 19 determination of nitrogen by steam distillation method (For Nitrogen 0.002 To 0.50 Percent) (Second Revision) |
MTD 34 |
|
40 |
IS 228 : Part 20 : 2003 |
Methods for chemical analysis of steels: Part 20 determination of carbon and sulphur by infra red absorption method (For Carbon 0.005 To 2 Percent And Sulphur 0.001 To 0.35 Percent) (Second Revision) |
MTD 34 |
|
41 |
IS 228 : Part 21 : 2003 |
Methods for chemical analysis of steels: Part 21 determination of copper by spectrophotometric method (For Copper 0.02 To 0.50 Percent) (Second Revision) |
MTD 34 |
|
42 |
IS 228 : Part 22 : 2003 |
Methods of chemical analysis of steels: Part 22 determination of total hydrogen in steel by thermal conductivity method (Hydrogen 0.1 Ppm To 50 Ppm) |
MTD 34 |
|
43 |
IS 228 : Part 23 : 2003 |
Methods of chemical analysis of steels: Part 23 determination of total nitrogen in steel by optical emission spectrometer (Nitrogen 0.002 To 1.0 Percent) |
MTD 34 |
|
44 |
IS 228 : Part 24 : 2003 |
Methods of chemical analysis of steels: Part 24 determination of nitrogen in steel by inert gas fusion - Thermal conductivity method (Nitrogen 0.001 To 0.2 Percent) |
MTD 34 |
