| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 15811 : 2008 |
Long - Range water - Cum - Foam monitor with self - Inducting, aspirating and non - Aspirating jetand spray/fog nozzle for fire fighting - Specification |
CED 22 |
| 2 |
IS 3319 : 1995 |
Blades, surgical, detachable (Bard Parker Type) and handles - Specification (Fourth Revision) |
MHD 1 |
| 3 |
IS 3642 : Part 1 : 1990 |
Surgical instruments - Specification: Part 1 non - Cutting, articulated instruments (Second Revision) |
MHD 1 |
| 4 |
IS 779 : 1994 |
Water meters (Domestic Type) - Specification (Sixth Revision) |
CED 3 |
| 5 |
IS 7501 : 1974 |
Specification for speculum, rectal, kellys pattern |
MHD 1 |
| 6 |
IS 6960 : 1973 |
Specification for catheters, metal, female |
MHD 3 |
| 7 |
IS 11433 : Part 2 : 1986 |
Specification for one part gun-grade polysulphide- based joint sealants:Part 2 Methods of test |
CED 13 |
| 8 |
IS 9756 : 1981 |
Specification for cups, vacuum extraction |
MHD 3 |
| 9 |
IS 10156 : 1982 |
Specification for cannula, intra - Uterine, hysterosalpingography |
MHD 3 |
| 10 |
IS 12270 : 1988 |
Cannula, Spackmann's Pattern |
MHD 3 |
| 11 |
IS 10878 : Part 2 : 1984 |
Flat - Form springs: Part 2 speciFication for springs made from rectangular cold - Rolled strips |
TED 34 |
| 12 |
IS 9802 : 1987 |
Specification for adjustable crampons for mountaineering (First Revision) |
PGD 27 |
| 13 |
IS 15833 : 2009 |
Stainless Steel Tower Bolts -specification |
CED 15 |
| 14 |
IS 15834 (Bi-lingual) : 2008 |
Stainless Steel Sliding Door Bolts for use with Padlocks - Specification |
CED 15 |
| 15 |
IS 7711 : 1975 |
Curette, Adenoid, Beckmann's Pattern |
MHD 4 |
| 16 |
IS 10037 : Part 3 : 1983 |
Requirements for sludge de-watering equipment: Part 3 Centrifugal equipment (Solid bowl type) |
CED 24 |
| 17 |
IS 10037 : Part 2 : 1983 |
Requirements for sludge de-watering equipment: Part 2 Vacuum filtration equipment |
CED 24 |
| 18 |
IS 3875 : 1983 |
Specification for hot plate, wax levelling, dental (First Revision) |
MHD 8 |
| 19 |
IS 3876 : 1985 |
Specification for knife, plaster, dental (First Revision) |
MHD 8 |
| 20 |
IS 8316 : 1977 |
Retractor, Hajek's Pattern |
MHD 4 |
| 21 |
IS 8735 : 1978 |
Tube, Suction, Yankauer's Pattern |
MHD 4 |
| 22 |
IS 10210 : 1993 |
CrlTeria for design of hydraulic hoists for gates (First Revision) |
WRD 12 |
| 23 |
IS 4623 : 2000 |
Recommendations for structural design of radial gates (Third Revision) |
WRD 12 |
| 24 |
IS 7326 : Part 1 : 1992 |
Penstock and turbine inlet butterfly valves for hydropower stations and systems: Part 1 criteria for structural and hydraulic design (First Revision) |
WRD 12 |
| 25 |
IS 5516 : 1996 |
Variable flow type air - Permeability apparatus (Blaine Type) - Specification (First Revision) |
CED 2 |
| 26 |
IS 9062 : 1987 |
Specification For Probes, Lacrimal, Bowman's Pattern (Modified) (First Revision) |
MHD 5 |
| 27 |
IS 14399 : Part 1 and 2 : 1996 |
Hot press moulded thermosetting glass fibre reinforced polyester resin (GRP) sectional water storage tanks: Part 1 Specification for panels: Part 2 Guidelines for assembly, installation and testing |
CED 3 |
| 28 |
IS 15637 : 2006 |
Welded stainless steel cylinders for liquefied petroleum gases (LPG) from 0.5 litre to 250 litre water capacity - Specification |
MED 16 |
| 29 |
IS 6869 : Part 1 : 1973 |
Specification for playground equipment for parks: Part i general requirements |
PGD 41 |
| 30 |
IS 15960 : 2013 |
Composite bottom stainless steel cooking utensils - Specification |
MED 33 |
| 31 |
IS 15275 : 2003 |
Padlocks - Specification |
MED 33 |
| 32 |
IS 3847 : 1992 |
Mortice Night Latches-specification |
MED 33 |
| 33 |
IS 14561 : 2014 |
Fire resisting (Insulating) filing cabinets - Specification (Second Revision) |
MED 24 |
| 34 |
IS 5600 : 2002 |
Pumps - Sewage and drainage - Specification (First Revision) |
MED 20 |
| 35 |
IS 655 : 2006 |
Air ducts - Specification (Second Revision) |
MED 3 |
| 36 |
IS 15879 : 2009 |
Breathing air compressor package - Specification |
MED 22 |
| 37 |
IS 2886 : 1991 |
Labelling paste for paper labels - Specification (First Revision) |
PCD 12 |
| 38 |
IS 13747 : 1993 |
Textile machinery – Hand-operated, single bed type, domestic knitting machines – Specification |
TXD 14 |
| 39 |
IS 2980 : 1999 |
Non - Pressure stoves - Specification (Third Revision) |
MED 26 |
| 40 |
IS 8402 : 1987 |
Methods of sampling and test for pressure sensitive adhesive tapes (First Revision) |
PCD 27 |
| 41 |
IS 3165 : 1990 |
Textile Machinery - Beam, Weaver's, for Use in Plain Calico Loom |
TXD 14 |
| 42 |
IS 4682 : Part 7 : 1974 |
Code of practice for lining of vessels and equipment for chemical processes: Part 7 corrosion and heat resistant metals |
MED 17 |
| 43 |
IS 11760 : 1986 |
Specification for gravity - Fed kerosene wick stove |
MED 26 |
| 44 |
IS 16218 : 2014 |
Forks - Specification |
MED 33 |
| 45 |
IS 16286 : 2014 |
Spoons - Specification |
MED 33 |
| 46 |
IS 15562 : 2005 |
Design and construction of fuel fired bogie hearth type heat treatment furnaces - Guidelines |
MTD 26 |
| 47 |
IS 4319 : Part 2 : 1986 |
Specification for pliers, stretching and contouring, dental: Part 2 pliers, contouring (First Revision) |
MHD 8 |
| 48 |
IS 13629 : 2004 |
Textile machinery – Stainless steel drying cylinders used in textile processing – Specification (first revision) |
TXD 14 |
| 49 |
IS 7467 : 1974 |
Specification for bands, matrix, dental, No. 1 and 2 |
MHD 8 |
| 50 |
IS 8284 : 1976 |
Pusher, Band, Dental, Mershon's Pattern |
MHD 8 |
| 51 |
IS 8287 : 1986 |
Specification for pliers, band stretching and contouring, parrot beak, dental (First Revision) |
MHD 8 |
| 52 |
IS 9717 : 1980 |
Specification for trays, impression, dental |
MHD 8 |
| 53 |
IS 12683 : Part 2 : 1989 |
Artificial limbs - Measuring devices for visually impaired persons: Part 2 type |
MHD 9 |
| 54 |
IS 12683 : Part 3 : 2000 |
Measuring devices for visually impaired persons - Specification: Part 3 goniometer |
MHD 9 |
| 55 |
IS 5827 : 1982 |
Specification for paraffin wax bath (First Revision) |
MHD 9 |
| 56 |
IS 6802 : 1986 |
Specification for prosthetic hip joint (First Revision) |
MHD 9 |
| 57 |
IS 13006 : 1990 |
Freezing grill - Specification |
FAD 32 |
| 58 |
IS 13033 : 1990 |
Straw holding clips - Specification |
FAD 32 |
| 59 |
IS 13820 : 1993 |
Artificial insemination straws - Specification |
FAD 32 |
| 60 |
IS 9660 : 2001 |
Methods for determination of softening - Melting characteristics of iron ore lumps/ pellets/sinter (First Revision) |
MTD 13 |
| 61 |
IS 9471 : Part 1 : 1980 |
Specification for modular lower limb orthotic components: Part 1 stirrups |
MHD 9 |
| 62 |
IS 9471 : Part 2 : 1980 |
Specification for modular lower limb orthotic components: Part 2 stirrups, split |
MHD 9 |
| 63 |
IS 13805 : 2004 |
General standard for qualification and certification of non - Destructive testing personnel - Specification (First Revision) |
MTD 21 |
| 64 |
IS 9471 : Part 5 : 1980 |
Specification for modular lower limb orthotic components: Part 5 joint unit, knee |
MHD 9 |
| 65 |
IS H12264 : 1987 |
Signaling Mirror for Lifeboats and Liferafts for Sea-going Ships (HINDI) |
TED 19 |
| 66 |
IS 11125 : 1984 |
General requirements for plate heat exchangers for marine use |
TED 19 |
| 67 |
IS B12264 : 1987 |
Specification for signalling mirror for lifeboats and liferafts for sea - Going ships |
TED 19 |
| 68 |
IS 12264 : 1987 |
Signaling Mirror for Lifeboats and Liferafts for Sea-going Ships |
TED 19 |
| 69 |
IS 11313 : 2007 |
Hydraulic Power Sprayers - Specification (First Revision) |
FAD 11 |
| 70 |
IS 13642 : 1993 |
Agricultural Tractors - Silencers Technical Requirements |
FAD 11 |
| 71 |
IS 15831 : 2009 |
Grader - Citrus - Size Based |
FAD 20 |
| 72 |
IS 7885 : 1985 |
Spray, Macintosh's Pattern |
MHD 11 |
| 73 |
IS 15862 : 2013 |
Cotton Seed Delinting Machinery - HCL Gas Generation Unit - Specification |
FAD 20 |
| 74 |
IS 6982 : 1973 |
Specification for gauge for intramedullary nails |
MHD 2 |
| 75 |
IS 10264 : 1982 |
Specification for trolley, hot food, for hospital and industrial cantee - Ns |
MHD 12 |
| 76 |
IS 13836 : 1993 |
Potato peeling machine (Electrically Operated) - Specification |
ETD 32 |
| 77 |
IS 13850 : 1993 |
Dish washing machine, heavy duty, ratchet type - Specification |
ETD 32 |
| 78 |
IS 5022 : 1989 |
Sterilizer, instruments, table model (Third Revision) |
MHD 12 |
| 79 |
IS 3829 : Part 1 : 1999 |
Specification for steam sterilizers: Part 1 horizontal cylindrical and horizontal rectangular steam sterilizers, pressure type (For Hospital And Pharmaceutical Use) (Second Revision) |
MHD 12 |
| 80 |
IS 9079 : 2018 |
Monoset pumps for clear, cold water for agricultural and water supply purposes - Specification (Third Revision) |
MED 20 |
| 81 |
IS 8034 : 2018 |
Submersible pumpsets - Specification (Third Revision) |
MED 20 |
| 82 |
IS 17051 : 2018 |
Textiles - Bullet resistant jackets - Performance requirements |
TXD 32 |
| 83 |
IS 6595 : Part 1 : 2018 |
Horizontal centrifugal pumps for clear, cold water - Specification: Part 1 agricultural and rural water supply purposes (Fourth Revision) |
MED 20 |
| 84 |
IS 9853 : 2018 |
Stainless steel accessories for village milk collection center - Specification (First Revision) |
FAD 33 |
| 85 |
IS 9854 : 2018 |
Code for construction of milk delivery vans (First Revision) |
FAD 33 |
| 86 |
IS 2829 : 2019 |
Steam - Jacketed ghee pans / boilers (?Stainless?Steel?)? - ?Specification (Second Revision) |
FAD 33 |
| 87 |
IS 16542 : 2016 |
Direct insertion type storage water tank for all glass evacuated tubes solar collector - Specification |
MED 4 |
| 88 |
IS 11552 : 2020 |
Liquid Nitrogen Vessels of Capacity up to 75 Litres — Specification ( Second Revision ) |
MED 17 |
| 89 |
IS 17296 : 2020 |
Stainless Steel Door Stoppers — Specification |
CED 15 |
| 90 |
IS 208 : 2020 |
Door Handles - Specification ( Sixth Revision ) |
CED 15 |
| 91 |
IS 12817 : 2020 |
Stainless Steel Butt Hinges - Specification ( Third Revision ) |
CED 15 |
| 92 |
IS 15834 : 2020 |
Stainless Steel Sliding Door Bolts ( Aldrops ) for Use With Padlocks - Specification ( First Revision ) |
CED 15 |
| 93 |
IS 9131 : 1979 |
Specification for rim locks |
MED 33 |
| 94 |
IS 9516 : 1980 |
Specification for heat resisting steels |
MTD 16 |
| 95 |
IS 10632 : Part 3 : 1983 |
Specification for non magnetic stainless steels for electrical applications: Part 3 specific requirements for sheets, strips and plates |
MTD 16 |
| 96 |
IS 10632 : Part 1 : 1983 |
Specification for non magnetic stainless steels for electrical applications: Part 1 general requirements |
MTD 16 |
| 97 |
IS/ISO/IEC 2382 : PART 36 : 2008 |
Information Technology — Vocabulary--Part 36 Learning, Education And Training |
LITD 19 |
| 98 |
IS/ISO 7240 : PART 2 : 2003 |
FIRE DETECTION AND ALARM SYSTEMS - PART 2 CONTROL AND INDICATING EQUIPMENT |
CED 22 |
| 99 |
IS 10594 : 1983 |
Specification for thermostatic expansion valves |
MED 3 |
| 100 |
IS 10594 : 1983 |
Specification for thermostatic expansion valves |
MED 3 |
| 101 |
IS 2553 : Part 2 : 1992 |
Safety Glass - Part 2 : For Road Transport |
TED 6 |
| 102 |
IS/ISO/TS 10013 : 2001 |
Guidelines for Quality Management System Documentation |
MSD 2 |
| 103 |
IS 14668 : 1999 |
Supporting screen and centrifugal liners for various types of centrifugal machines - Specification |
FAD 2 |
| 104 |
IS 729 : 1979 |
Specification for drawer locks cupboard locks and box locks (Third Revision) |
MED 33 |
| 105 |
IS 13929 : 1993 |
Stainless steel decking plates for cane mud filters - Specification |
FAD 2 |
| 106 |
IS/ISO 18825 : Part 1 : 2016 |
Textiles Clothing Digital fittings Part 1: Vocabulary and terminology used forthe virtual human body |
TXD 20 |
| 107 |
IS/ISO 18825 : Part 2 : 2016 |
Textiles Clothing Digital fittings Part 2: Vocabulary and terminology used for attributes of the virtual human body |
TXD 20 |
| 108 |
IS 15799 : 2021 |
Methods for testing tar and bituminous materials - Ageing of bitumen (RTFO and PAV tests) (First Revision) |
PCD 6 |
| 109 |
IS 17605 : 2021 |
Carbon fibre Determination of size content |
TXD 40 |
| 110 |
IS 17622 : Part 2 : 2021 |
Water Reuse in Urban Areas Guidelines for Centralized Water Reuse System Part 2 Management of a Centralized Water Reuse System |
EED 2 |
| 111 |
IS 17623 : 2021 |
Water Reuse Vocabulary |
EED 2 |
| 112 |
IS/IEC/TR 62351 : Part 13 : 2016 |
Power systems management and associated information exchange - Data and communications security Part 13: Guidelines on security topics to be covered in standards and specifications |
LITD 10 |
| 113 |
IS 16239 : 2021 |
Polyurethane Matt Finish ( TWO PACK) - Specification |
CHD 20 |
| 114 |
IS 6997 : 2021 |
Test code for sugarcane crushers |
FAD 20 |
| 115 |
IS 4743 : 2018 |
Settling tanks for ghee - Specification (First Revision) |
FAD 33 |
| 116 |
IS 2688 : 2009 |
Insulated stainless steel horizontal milk storage tank - Specification (First Revision) |
FAD 33 |
| 117 |
IS 10525 : 1983 |
Specification for general purpose drinking water trolley |
MED 7 |
| 118 |
IS 16015 : 2013 |
Mortice locks with lever mechanism (Vertical Type, Sliding Door Locks And Dead Locks) - Specification |
MED 33 |
| 119 |
IS 7185 : 1981 |
Specification for boiler, milk aluminium (First Revision) |
MED 33 |
| 120 |
IS 7257 : 1973 |
Specification for trunks, steel, domestic |
MED 33 |
| 121 |
IS 9246 : 1979 |
Specification for chapati machine |
MED 33 |
| 122 |
IS 1495 : 1970 |
Specification for mild steel dust - Bins (First Revision) |
MED 33 |
| 123 |
IS 6591 : 1972 |
Specification for rail milk tankers |
FAD 19 |
| 124 |
IS 17614 : Part 15 : 2021 |
Water quality -Sampling- Part 15 Guidance on the preservation and handling of sludge and sediment samples |
CHD 36 |
| 125 |
IS 3661 : 2019 |
Bulk Milk Cooling Tanks — Specification ( First Revision ) |
FAD 19 |
| 126 |
IS 11492 : 1985 |
Rotary Vacuum Filter Screens for Sugar Industry |
FAD 2 |
| 127 |
IS 13316 : 1992 |
Welded austenitic stainless steel tubes for heat exchangers for the sugar industry - Specification |
FAD 2 |
| 128 |
IS 6880 : 1972 |
Specification for machine, sewian (Vermicelli) |
MED 33 |
| 129 |
IS 7211 : 1973 |
Specification for mincer, hand operated, clamp type |
MED 33 |
| 130 |
IS 7763 : 1975 |
Specification for extractor, juice, domestic |
MED 33 |
| 131 |
IS 12570 : 2022 |
Metallic powders excluding powders for hardmetals Determination of dimensional changes associated with compacting and sintering |
MTD 25 |
| 132 |
IS 9410 : Part 1 : 1980 |
Specification for silver clip set: Part 1 forceps, clip cutting and forming |
MHD 7 |
| 133 |
IS 9410 : Part 2 : 1980 |
Specification for silver clip set: Part 2 forceps, clip applying |
MHD 7 |
| 134 |
IS 9410 : Part 3 : 1981 |
Specification for silver clip set: Part 3 rack, clip |
MHD 7 |
| 135 |
IS 9074 : 1979 |
Specification for raney clips and clip applicator |
MHD 7 |
| 136 |
IS 9933 : 1981 |
Specification for retractor, brain, malleable |
MHD 7 |
| 137 |
IS 10157 : 1982 |
Percussor, Neurological, McGill's Pattern |
MHD 7 |
| 138 |
IS 2347 : 2017 |
Domestic pressure cooker - Specification (Sixth Revision) |
MED 33 |
| 139 |
IS 14350 : 1996 |
Code for hygienic conditions for sugar factories |
FAD 2 |
| 140 |
IS 4493 : Part 2 : 2022 |
Hollow Metallic Waveguides Part 2 Relevant specifications for ordinary rectangular waveguides First Revision |
LITD 6 |
| 141 |
IS/ISO 9994 : 2018 |
Lighters Safety specifications First Revision |
MED 23 |
| 142 |
IS/ISO/IEC GUIDE 76 : 2020 |
DEVELOPMENT OF SERVICE STANDARDS - RECOMMENDATIONS FOR ADDRESSING CONSUMER ISSUES (First Revision) |
MSD 15 |
| 143 |
IS 8182 : 1976 |
Code of hygienic conditions for processed meat products |
FAD 18 |
| 144 |
IS 6628 : 1972 |
Specification for slide rails for use in abattoirs |
FAD 18 |
| 145 |
IS 6950 : 1973 |
Specification for pig hooks |
FAD 18 |
| 146 |
IS 11533 : 1985 |
Specification for sheep dressing hooks |
FAD 18 |
| 147 |
IS 6782 : 1972 |
Specification for hog gambrels |
FAD 18 |
| 148 |
IS 7053 : 1996 |
Meat and meat products - Basic requirements for a stall for sale of meat of small and large animals (First Revision) |
FAD 18 |
| 149 |
IS 7909 : 1993 |
Slaughter house equipment - Electrical stunning tongs for pigs - Specification (First Revision) |
FAD 18 |
| 150 |
IS 12189 : 1987 |
Specification for sheep spreaders |
FAD 18 |
| 151 |
IS 12486 : 1988 |
Specification for meat inspection table |
FAD 18 |
| 152 |
IS 12487 : 1988 |
Specification for offal handling table for small animals |
FAD 18 |
| 153 |
IS 5338 : 1969 |
Specification for catheter, eustachian |
MHD 4 |
| 154 |
IS 5720 : 1970 |
Retractor, Mastold, Self-Retaining (Mollison's pattern) |
MHD 4 |
| 155 |
IS 8094 : 1976 |
Hook, Cerumen, Cawthorne's Pattern |
MHD 4 |
| 156 |
IS 8128 : 1976 |
Elevator, Farabeuf's Pattern |
MHD 4 |
| 157 |
IS 9058 : 1979 |
Knife, Upward Cutting, Zoellner's Pattern |
MHD 4 |
| 158 |
IS 9059 : 1979 |
Knife, Downward Cutting, Zoellner's Pattern |
MHD 4 |
| 159 |
IS 9479 : 1980 |
Specification for Hook, Fenestra, 25°, 45° and 90° Angle Ear, Shea's Pattern |
MHD 4 |
| 160 |
IS 9480 : 1980 |
Elevators, Left and Right, Ear, Shea's Pattern |
MHD 4 |
| 161 |
IS 10725 : 1983 |
Specification for knife, myringotomy |
MHD 4 |
| 162 |
IS 10726 : 1983 |
Specification for knife, meatal skin incision |
MHD 4 |
| 163 |
IS 10846 : 1984 |
Speculum, Nasal, Killian's Pattern |
MHD 4 |
| 164 |
IS 3807 : 2000 |
Ent surgery instruments - Forceps, dressing, aural and nasal - Specification (First Revision) |
MHD 4 |
| 165 |
IS 8136 : 1976 |
Seeker, Dundas Grant's Pattern |
MHD 4 |
| 166 |
IS 8157 : 1976 |
Forceps, Granulation, Heath's Pattern |
MHD 4 |
| 167 |
IS 9526 : 1980 |
Specification for scissors, stapedectomy, crocodile jaw |
MHD 4 |
| 168 |
IS 9544 : 1980 |
Specification for forceps, stapedectomy, round cup, elongated cup and oval cup jaws |
MHD 4 |
| 169 |
IS 9564 : 1980 |
Specification for forceps, stapedectomy, serrated, smooth and Mc Gee wire closing jaws |
MHD 4 |
| 170 |
IS 181 : 2022 |
Textiles - Leopard Cloth - Specification |
TXD 31 |
| 171 |
IS 9073 : 1979 |
Specification for neuro - Suction tubes |
MHD 7 |
| 172 |
IS 10048 : 1999 |
Rice Grader - Specification (Second Revision) |
FAD 20 |
| 173 |
IS 9555 : 1999 |
Rice Polisher - Specification (Second Revision) |
FAD 20 |
| 174 |
IS 10507 : 1998 |
Paddy Separator - Specification (First Revision) |
FAD 20 |
| 175 |
IS 11787 : 1986 |
Specification for Paddy Dehusker, Rubber Roll Type |
FAD 20 |
| 176 |
IS 12396 : 1988 |
Specification for Paddy Cleaner |
FAD 20 |
| 177 |
IS 12411 : 1988 |
Specification for Paddy Dehusker, Centrifugal Type |
FAD 20 |
| 178 |
IS 12792 : 1989 |
Agricultural Produce Milling Machinery - Mini Rice Mill - Specification |
FAD 20 |
| 179 |
IS 3494 : 1978 |
Specification for Pruning Secateur (First Revision) |
FAD 11 |
| 180 |
IS 3122 : 1982 |
Specification for Budding and Grafting Knife Combined (First Revision) |
FAD 11 |
| 181 |
IS 3748 : 2022 |
Tool Steels - Specification |
MTD 16 |
| 182 |
IS 3092 : 1982 |
Specification for Rubber Draining and Tapping Knife (First Revision) |
FAD 11 |
| 183 |
IS 11620 : 1986 |
Code of practice for fluid bed dryer |
MED 17 |
| 184 |
IS 1948 : 1961 |
Specification for aluminium doors, windows and ventilators |
CED 11 |
| 185 |
IS 10953 : 1984 |
Specification for catheter uterine, single channel (Nelson Type) |
MHD 13 |
| 186 |
IS 10676 : 1983 |
Spatula, Brain, Double-ended Malleable, Olivecrona's Pattern |
MHD 7 |
| 187 |
IS 14460 : 1997 |
Seed Processing Equipment - Gravity Separator - Specification |
FAD 20 |
| 188 |
IS 10520 : 1989 |
Agricultural Produce Milling Machinery - Emery Stones for Burr Flour Mills - Specification (First Revision) |
FAD 20 |
| 189 |
IS 4120 : 1967 |
Specification for tubs and baths |
MED 33 |
| 190 |
IS 16074 : 2013 |
Steel flush door shutters - Specification |
CED 11 |
| 191 |
IS 3593 : 2022 |
Solvent Extracted Rice Bran (DeOiled Rice Bran) as Livestock Feed Ingredient � Specification |
FAD 5 |
| 192 |
IS 1660 : 2009 |
Wrought aluminium utensils - Specification (First Revision) |
MED 33 |
| 193 |
IS 6969 : 1973 |
Code For Hygienic Conditions For Handling And Sale Of Refrigerated Drinking Water |
FAD 14 |
| 194 |
IS 1475 : Part 1 : 2001 |
Self - Contained drinking water coolers - Specification: Part 1 energy consumption and performance (Third Revision) |
MED 3 |
| 195 |
IS 6595 : Part 2 : 1993 |
Horizontal centrifugal pumps for clear, cOld water: Part 2 general pmUrpose (Other than agricultural and rural water supply) - Specification (Second Revision) |
MED 20 |
| 196 |
IS 9471 : Part 6 : 2000 |
Modular lower limb orthotic components part 6 orthotic hip joint (Joint Unit, Hip Drop Lock) - Specification |
MHD 9 |
| 197 |
IS 3025 : Part 62 : 2023 |
Methods of Sampling and Test Physical and Chemical for Water and Wastewater Part 62 Tannins (Second Revision) |
CHD 36 |
| 198 |
IS 5563 : 1985 |
Specification for screw conveyors for industrial use (First Revision) |
MED 6 |
| 199 |
IS 7719 : 2013 |
Metallic spiral wound gaskets - Specification (First Revision) |
MED 30 |
| 200 |
IS 5723 : 1970 |
Specification for mallet with fluted handle for ENT surgery |
MHD 4 |
| 201 |
IS 5747 : 1970 |
SPECIFICATION FOR RETRACTOR, ENDAURAL ( LEMPERT'S PATTERN ) |
MHD 4 |
| 202 |
IS 4351 : 2003 |
Steel Door Frames -Specification ( Second Revision) |
CED 11 |
| 203 |
IS 8442 : 2008 |
Stand post type water and foam monitor for fire fighting - Specification (First Revision) |
CED 22 |
| 204 |
IS 12190 : 1987 |
Specification for sheep bleeding shackles |
FAD 18 |
| 205 |
IS 14442 : 1997 |
Agricultural Produce Milling Machinery - Burr Mill - Test Code |
FAD 20 |
| 206 |
IS 18073 : 2023 |
Electric Traction Motor - Performance and Functional Requirements |
TED 27 |
| 207 |
IS 14756 : 2017 |
Stainless steel cookware - Specification (First Revision) |
MED 33 |
| 208 |
IS 11904 : 2023 |
Rolling bearings Radial bearings with locating snap ring Dimensions geometrical product specifications GPS and tolerance values |
PGD 13 |
| 209 |
IS 7610 : Part 5 : 2023 |
Textiles - Machinery Fabrics, Wool - Specification Part 5 Lapping Cloth (First Revision) |
TXD 33 |
| 210 |
IS 7938 : 2023 |
Air Receivers for Compressed Air Installation � Specification ( First Revision ) |
MED 22 |
| 211 |
IS 10684 : 1983 |
Specification for Tree Pruner |
FAD 11 |
| 212 |
IS 8696 : 1978 |
Specification for guide, Saw, De Martel's Pattern |
MHD 7 |
| 213 |
IS 9911 : 1981 |
Specification for cannula, brain |
MHD 7 |
| 214 |
IS 18229 : Part 1 : 2023 |
Geometrical product specifications (GPS) � Dimensional tolerancing: Part 1 Linear sizes |
PGD 25 |
| 215 |
IS 18239 : 2023 |
Soil quality Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry |
FAD 7 |
| 216 |
IS 18241 : 2023 |
Soil quality Determination of arsenic antimony and selenium in aqua regia soil extracts with electrothermal or hydride-generation atomic absorption spectrometry |
FAD 7 |
| 217 |
IS 2336 : 1963 |
Specification for stainless steel milk vats |
FAD 33 |
| 218 |
IS 7756 : 1975 |
Specification for Depressor, Tongue, Lack’s Pattern |
MHD 4 |
| 219 |
IS 13169 : 1991 |
Ent surgery instruments head mirror - Specification |
MHD 4 |
| 220 |
IS 11353 : 2023 |
Basic and Safety Principles for Man-Machine Interface Marking and Identification - Identification of Equipment Terminals Conductor Terminations and Conductors (First Revision) |
ETD 1 |
| 221 |
IS 18265 : 2023 |
Timekeeping instruments -- Crowns and sealed tubes -- Designs and dimensions |
PGD 23 |
| 222 |
IS 10077 : 1982 |
Specification for equipment for determination of shrinkage factors |
CED 43 |
| 223 |
IS/ISO 80000 : Part 1 : 2022 |
Quantities and Units Part 1 General |
PGD 1 |
| 224 |
IS 18202 : 2023 |
Nimba Azadirachta indica A Juss Fruit for use in Traditional Medicine Specification |
AYD 1 |
| 225 |
IS 10954 : 1984 |
Specification for catheter, cow |
MHD 13 |
