| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 3196 : Part 1 : 2013 |
Welded low carbon steel cylinders exceeding 5 litres water capacity for low pressure liquefiable gases: Part 1 cylinders for liquefied petroleum gases (Lpg) - Specification (Sixth Revision) |
MED 16 |
| 2 |
IS 15660 : 2017 |
Refillable transportable seamless aluminium alloy gas cylinders - Specification (First Revision) |
MED 16 |
| 3 |
IS 3196 : Part 2 : 2006 |
Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases: Part 2 cylinders for liquefiable non - Toxic gases other than lpg - Specification (First Revision) |
MED 16 |
| 4 |
IS 3196 : Part 3 : 2012 |
Welded low carbon steel cylinder exceeding 5 litre water capacity for low pressure liquefiable gases: Part 3 methods of test (First Revision) |
MED 16 |
| 5 |
IS 16054 : 2013 |
Periodic inspection and testing - Welded low carbon steel cylinders exceeding 5 - Litre water capacity for liquified petroleum gas (Lpg) - Code of practice |
MED 16 |
| 6 |
IS 4152 : 2011 |
Seamless carbon dioxide cylinders for fire fighting purposes on boardship - Specification (Third Revision) |
MED 16 |
| 7 |
IS 15966 : 2013 |
Refillable welded steel cylinder for liquefied petroleum gas (LPG) - Procedure for checking before, during and after filling |
MED 16 |
| 8 |
IS 3196 : Part 4 : 2001 |
Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases - Specification: Part 4 cylinders for toxic and corrosive gases |
MED 16 |
| 9 |
IS 13258 : 2014 |
Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gas - Requirements for inspection and reconditioning of used lpg cylinders (First Revision) |
MED 16 |
| 10 |
IS 16185 : 2014 |
Periodic inspection and testing - Welded carbon steel gas cylinders - Code of practice |
MED 16 |
| 11 |
IS 16175 : 2014 |
Periodic inspection and requalification - Liquefied petroleum gas (LPG) cylinders for automotive use - Code of practice |
MED 16 |
| 12 |
IS 15637 : 2006 |
Welded stainless steel cylinders for liquefied petroleum gases (LPG) from 0.5 litre to 250 litre water capacity - Specification |
MED 16 |
| 13 |
IS 15490 : 2017 |
Seamless steel cylinders for on - Board storage of compressed natural gas as a fuel for automotive vehicles - Specification (First Revision) |
MED 16 |
| 14 |
IS 8198 : Part 8 : 1993 |
Code of practice for steel cylinders for compressed gases: Part 8 common organic refrigerant gases (First Revision) |
MED 16 |
| 15 |
IS 8198 : 2004 |
Steel cylinders for compressed gases (Atmospheric gases, hydrogen, high pressure liquefiable gases and dissolved acetylene gases) - Code of practice |
MED 16 |
| 16 |
IS 7312 : 2018 |
Welded and seamless steel dissolved acetylene gas cylinders - Specification (Third Revision) |
MED 16 |
| 17 |
IS 7285 : Part 2 : 2017 |
Refillable seamless steel gas cylinders - Specification: Part 2 quenched and tempered steel cylinders with tensile strength less than 1 100 mpa (112 Kgf/mm²) (Fourth Revision) |
MED 16 |
| 18 |
IS 7285 : Part 1 : 2018 |
Refillable seamless steel gas cylinders - Specification: Part 1 normalized steel cylinders (Fourth Revision) |
MED 16 |
| 19 |
IS 7142 : 1995 |
Welded low carbon steel cylinders for low pressure liquifiable gases not exceeding 5 litre water capacity - Specification (First Revision) |
MED 16 |
| 20 |
IS 5845 : 1993 |
Code of practice for inspection of low pressure welded steel gas cylinders other than LPG cylinders in use (Second Revision) |
MED 16 |
| 21 |
IS 3710 : 1978 |
Filling ratios for low pressure liquefiable gases contained in cylinders (First Revision) |
MED 16 |
| 22 |
IS 8198 : Part 6 : 1988 |
Code of practice for steel cylinders for compressed gases Part 6 Liquefied chlorine gas |
MED 16 |
| 23 |
IS 8198 : Part 11 : 1988 |
Code of practice for steel cylinders for compressed gases: Part 11 methyl chloride gas (First Revision) |
MED 16 |
| 24 |
IS 6044 : Part 1 : 2018 |
Liquefied petroleum gas storage installations - Code of practice: Part 1 residential, commercial and industrial cylinder installations (Third Revision) |
MED 16 |
| 25 |
IS 15975 : 2020 |
Gas Cylinders — Conditions for Filling Gas Cylinders ( First Revision ) |
MED 16 |
| 26 |
IS 13673 : Part 2 : 2021 |
Expression of Performance of Electrochemical Analyzers Part 2 pH Value ( First Revision ) |
ETD 18 |
| 27 |
IS 3224 : 2002 |
Valve fittings for compressed gas cylinders excluding liquefied petroleum gas (LPG) cylinders - Specification (Third Revision) |
MED 16 |
| 28 |
IS 12586 : 1988 |
Brazed low carbon steel gas cylinders not exceeding 13 litre water capacity - Specification |
MED 16 |
| 29 |
IS 8198 : Part 5 : 1984 |
Code of practice for steel cylinders for compressed gases - Part 5 : liquefied petroleum gas (LPG) (First Revision) |
MED 16 |
| 30 |
IS/IEC 60695 : Part 1 : Sec 30 : 2017 |
Fire Hazard Testing Part 1 Guidance for assessing the fire hazard of electrotechnical products Section 30 Preselection testing process General guidelines |
LITD 1 |
| 31 |
IS 17902 : 2022 |
Animal feeding stuffs Determination of amylase-treated neutral detergent fibre content ANDF |
FAD 5 |
| 32 |
IS 8198 : Part 7 : 1988 |
Code of practice for steel cylinders for compressed gases: Part 7 ammonia gas (First Revision) |
MED 16 |
| 33 |
IS 8198 : Part 9 : 1988 |
Code of practice for steel cylinders for compressed gases: Part 9 sulphur dioxide gas (First Revision) scope - covers filling, inspection, testing, maintenance |
MED 16 |
| 34 |
IS 8198 : Part 12 : 1982 |
Code of practice for steel cylinders for compressed gases: Part 12 gases for medical use |
MED 16 |
