| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS/ISO 7240 : Part11 : 2011 |
Fire detection and alarm systems: Part 11 manual call points |
CED 22 |
| 2 |
IS 13900 : 1993 |
Generic specification for colour picture tube with electrostatic focussing and electromagnetic deflection for colour television receivers |
LITD 4 |
| 3 |
IS 12274 : 1987 |
Safety requirements for electronic flash apparatus for photographic purposes |
LITD 7 |
| 4 |
IS 13215 : 1991 |
Portable/ Personal Transceivers - Specification |
LITD 7 |
| 5 |
IS 15245 : 2002 |
Digital Set Top Box - Specificaiton |
LITD 7 |
| 6 |
IS 11182 : Part 5 : 1993 |
Guide for evaluation of insulation systems of electrical equipment: Part 5 mechanical endurance functional tests |
ETD 2 |
| 7 |
IS 4547 : 1992 |
Receivers for monochrome television broadcast transmissions - Specificaiton (Third Revision) |
LITD 7 |
| 8 |
IS/IEC 61757 : PART 1 : 1998 |
Fibre optic sensors: Part 1 generic specification |
LITD 11 |
| 9 |
IS 11423 : 1985 |
Specification for portable prospecting radiation meters with geiger - Muller counter tube (Linear Scale Instruments) |
LITD 8 |
| 10 |
IS 3544 : 2009 |
General requirements and tests for tag strips (First Revision) |
LITD 3 |
| 11 |
IS 4795 : Part 1 : 2009 |
Holders for indicator lamps for electronic and telecommunication equipment - Specificaiton: Part 1 general requirements and tests (First Revision) |
LITD 3 |
| 12 |
IS 5054 : Part 1 : Sec 1 : 1995 |
Radio frequency connectors: Part 1 general requirements and measuring methods: Sec 1 general (Second Revision) |
LITD 6 |
| 13 |
IS 6102 : Part 1 : 2009 |
Finger knobs used in electronic and telecommunication equipment - Specificaiton: Part 1 general requirements and tests (First Revision) |
LITD 3 |
| 14 |
IS 13409 : 1992 |
High Frequency Transreceivers - Specification |
LITD 12 |
| 15 |
IS/IEC 691 : 1993 |
Thermal Links - Requirements and Application Guide |
ETD 39 |
| 16 |
IS 15382 : Part 3 : 2019 |
Insulation Coordination for Equipment within Low-Voltage Systems Part 3 Use of Coating, Potting or Moulding for Protection against Pollution (First Revision) |
ETD 19 |
| 17 |
IS 13648 : 1993 |
Power electronics capacitors |
ETD 29 |
| 18 |
IS 15406 : Part 1 : 2003 |
Capacitors for microwave ovens: Part 1 general |
ETD 29 |
| 19 |
IS 302 : Part 2 : Sec 25 : 2014 |
Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens |
ETD 32 |
| 20 |
IS 14479 : 1998 |
Electrotechnical compatibility of electrical and electronic installations in ships - Specification |
ETD 20 |
| 21 |
IS 13122 : Part 1 : 1993 |
Transmitters for use in industrial process control systems - Specification: Part 1 methods for evaluating the performance |
ETD 18 |
| 22 |
IS 616 : 2017 |
Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision) |
LITD 7 |
| 23 |
IS 14700 : Part 4 : Sec 15 : 2018 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 15 flickermeter - Functional and design specifications (Second Revision) |
LITD 9 |
| 24 |
IS 5786 : Part 1 : 2018 |
Fixed resistors for use in electronic equipment: Part 1 generic specification (Second Revision) |
LITD 5 |
| 25 |
IS 16855 : Part 1 : 2018 |
Current and voltage sensors or detectors, to be used for fault passage indication purposes: Part 1 general principles and requirements |
ETD 34 |
| 26 |
IS 14481 : Part 1 : 2018 |
Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post - Accident conditions: Part 1 general requirements |
LITD 8 |
| 27 |
IS 14286 : Part 2 : 2019 |
Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 2 test procedures (Second Revision) |
ETD 28 |
| 28 |
IS 17017 : Part 1 : 2018 |
Electric Vehicle Conductive Charging System Part 1 General Requirements |
ETD 51 |
| 29 |
IS 17017 : Part 1 : 2018 |
Electric Vehicle Conductive Charging System Part 1 General Requirements |
ETD 51 |
| 30 |
IS 8872 : Part 1 : 2018 |
Potentiometers for use in electronic equipment: Part 1 generic specification (First Revision) |
LITD 5 |
| 31 |
IS/IEC 60793 : Part 1 : Sec 50 : 2014 |
Optical Fibres Part 1 Measurement Methods and Test Procedures Section 50 Damp heat (steady state) tests |
LITD 11 |
| 32 |
IS 17008 : 2019 |
Weigh-in-Motion System for Road Vehicles Specification |
PGD 26 |
| 33 |
IS/IEC 61800 : Part 2 : 2015 |
Adjustable Speed Electrical Power Drive Systems Part 2 General Requirements — Rating Specifications for Low Voltage Adjustable Speed a.c. Power Drive Systems |
ETD 31 |
| 34 |
IS/IEC 62246 : Part 1 : Sec 1 : 2018 |
Reed Switches Part 1 Generic Specification Section 1 Blank detail specification ( First Revision ) |
ETD 35 |
| 35 |
IS/IEC 62421 : 2007 |
Electronics Assembly Technology-Electronic Modules |
LITD 5 |
| 36 |
IS 15474 : Part 3 : Sec 5 : 2018 |
Dependability Management Part 3 Application Guide Section 5 Reliability Test Conditions and Statistical Test Principles |
LITD 2 |
| 37 |
IS 17040 : 2018 |
Circuit Breakers — Switched Protective Earth Portable Residual Current Devices for Class I and Battery Powered Vehicle Applications |
ETD 7 |
| 38 |
IS 9000 : Part 4 : 2020 |
Environmental Testing Part 4 Tests - Test Cab: Damp Heat, Steady State ( Second Revision ) |
LITD 1 |
| 39 |
IS/ISO 7240 : Part 8 : 2014 |
Fire Detection and Alarm Systems Part 8 Point-Type Fire Detectors Using a Carbon Monoxide Sensor in Combination with a Heat Sensor |
CED 22 |
| 40 |
IS 15500 : PART 4 : 2004 |
DEEPWELL HANDPUMPS, COMPONENTS AND SPECIAL TOOLS SPECIFICATION PART 4 STEEL COMPONENTS |
MED 27 |
| 41 |
IS/ISO 7240 : Part 18 : 2017 |
Fire Detection and Alarm Systems Part 18 Input/Output Devices |
CED 22 |
| 42 |
IS 14772 : 2000 |
Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations — General Requirements ( First Revision ) |
ETD 14 |
| 43 |
IS 12444 : 1988 |
Copper Wire Rods for Electrical Applications — Specification ( First Revision ) |
MTD 8 |
| 44 |
IS 517 : 1986 |
Specification for Methanol ( Methyl Alcohol ) ( Third Revision ) |
PCD 9 |
| 45 |
IS 15909 : 2015 |
PVC Geomembranes for Lining - Specification ( Second Revision ) |
TXD 30 |
| 46 |
IS/ISO 105 : PART C06 : 1994 |
Textiles - Tests for Colour Fastness : Part C06 Colour Fastness To Domestic and Commercial Laundering |
TXD 5 |
| 47 |
IS 9229 : 1979 |
Specification for inductors for electromagnetic interference suppression |
LITD 24 |
| 48 |
IS 10230 : Part 1 : 1982 |
Specification for if and RF transformers inductors (Coils) and: Part 1 general requirements and tests |
LITD 24 |
| 49 |
IS 11334 : 1984 |
Method of measurement for piezoelectric ceramic resonators and resonator units for frequency control and selection |
LITD 24 |
| 50 |
IS 4105 : 1988 |
Styrene (Vinyl Benzene) |
PCD 9 |
| 51 |
IS 13247 : Part 1 : 1992 |
Complete filter units for radio interference suppression: Part 1 generic specification |
LITD 5 |
| 52 |
IS 13252 : Part 1 : 2010 |
Information Technology Equipment - Safety Part 1: General Requirements (Second Revision) |
LITD 7 |
| 53 |
IS 12679 : 2021 |
By-product Gypsum for Use in Plaster Blocks and Boards - Specification |
CED 4 |
| 54 |
IS 808 : 2021 |
Hot Rolled Steel Beam, Column, Channel and Angle Sections - Dimensions and Properties (Fourth Revision) |
CED 7 |
| 55 |
IS 13094 : 2021 |
Selection of ground improvement techniques for foundation in weak soils - Guidelines (first revision) |
CED 43 |
| 56 |
IS 15382 : Part 1 : 2014 |
Insulation coordination for equipment within low - Voltage systems: Part 1 principles, requirements and tests (First Revision) |
ETD 19 |
| 57 |
IS 9205 : Part 1 : 1979 |
Specification for directly heated negat4e temperature coefficient thermistors: Part 1 general requirements and methods of tests |
LITD 24 |
| 58 |
IS/IEC 60862 : Part 1 : 2003 |
Surface acoustic wave (SAW) filters of assessed quality: Part 1 generic specification |
LITD 24 |
| 59 |
IS/IEC 60862 : Part 1 : 2003 |
Surface acoustic wave (SAW) filters of assessed quality: Part 1 generic specification |
LITD 24 |
| 60 |
IS 17776 : 2021 |
Textiles Knitted Combat T-shirt Specification |
TXD 10 |
| 61 |
IS 17777 : 2021 |
Textiles Dyed knitted or crochet fabric made from synthetic fibres Specification |
TXD 10 |
| 62 |
IS/IEC 60669 : Part 2 : Sec 1 : 2008 |
Switches for Household and Similar Fixed Electrical Installations Part 2 Particular Requirements Section 1 Electronic Switches |
ETD 14 |
| 63 |
IS/ISO 10434 : 2020 |
Bolted Bonnet Steel Gate Valves for the Petroleum, Petrochemical and Allied Industries |
MED 17 |
| 64 |
IS/ISO 5116 : Part 2 : 2021 |
Improving transparency in financial and business reporting Harmonization topics - Part 2: Guidelines for data point modelling |
SSD 3 |
| 65 |
IS 2993 : 1998 |
A.C. motor capacitors (Second Revision) |
ETD 29 |
| 66 |
IS/ISO 7240 : Part 2 : 2003 |
Fire detection and alarm systems: Part 2 control and indicating equipment |
CED 22 |
| 67 |
IS/ISO 7240 : Part 3 : 2010 |
Fire detection and alarm systems: Part 3 audible alarm devices |
CED 22 |
| 68 |
IS/ISO 7240 : Part 4 : 2003 |
Fire detection and alarm systems: Part 4 power supply equipment |
CED 22 |
| 69 |
IS/ISO 7240 : Part 5 : 2012 |
Fire Detection and Alarm Systems Part 5 Point-Type Heat Detectors |
CED 22 |
| 70 |
IS/ISO 7240 : Part 7 : 2011 |
Fire detection and alarm systems: Part 7 point - Type smoke detectors using scattered light, transmitted light or ionization |
CED 22 |
| 71 |
IS/ISO 7240 : Part 12 : 2014 |
Fire detection and alarm systems: Part 12 line type smoke detectors using a transmitted optical beam |
CED 22 |
| 72 |
IS/ISO 7240 : Part 15 : 2004 |
Fire detection and alarm systems: Part 15 point type fire detectors using scattered light, transmitted light or ionization sensors in combination with a heat sensor |
CED 22 |
| 73 |
IS 7839 : 2022 |
DRIED ICE CREAM MIX - SPECIFICATION (First Revision of IS 7839) |
FAD 19 |
| 74 |
IS 302 : Part 1 : 2008 |
Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision) |
ETD 32 |
| 75 |
IS/IEC/TR 63091 : 2017 |
Study for the derating curve of surface mount fixed resistors Derating curves based on terminal part temperature |
LITD 5 |
| 76 |
IS 1921 : 2005 |
Flux cored solder wire - Specification (Second Revision) |
MTD 9 |
| 77 |
IS/IEC 62368 : Part 1 : 2018 |
Audio / Video, Information and Communication Technology Equipment Part 1: Safety Requirements ( First Revision ) |
LITD 7 |
