| SNo |
IS Number |
Title |
Technical Committee |
|
1 |
IS 7 : 1980 |
Moderate Heat Duty Fireclay Refractories Group B |
MTD 15 |
|
2 |
IS 456 : 2000 |
Plain and reinforced concrete - Code of practice (Fourth Revision) |
CED 2 |
|
3 |
IS 962 : 1989 |
Code of practice for architectural and building drawings (Second Revision) |
CED 51 |
|
4 |
IS 1256 : 1967 |
Code of Practice for Building Byelaws |
CED 12 |
|
5 |
IS 1343 : 2012 |
Prestressed Concrete - Code Of Practice |
CED 2 |
|
6 |
IS 2332 : 1972 |
Nomenclature of floor and storeys |
CED 51 |
|
7 |
IS 7973 : 1976 |
Code of practice for architectural and building working drawings |
CED 51 |
|
8 |
IS 7022 : Part 1 : 1973 |
Glossary of Term Relating to Water, Sewage and Industrial Effluents,: Part 1 |
CHD 36 |
|
9 |
IS 7860 : 1975 |
Mask, Schimmelbusch's Pattern with Chadborn's Modification |
MHD 13 |
|
10 |
IS 1020 : 1963 |
Conversion tables for ordinary use (revised) |
PGD 37 |
|
11 |
IS 787 : 1956 |
Guide for inter - Conversion of values from one system of units to another |
PGD 1 |
|
12 |
IS 1172 : 1993 |
Code of basic requirements for water supply, drainge and sanitation (Fourth Revision) |
CED 24 |
|
13 |
IS 2065 : 1983 |
Code of practice for water supply in buildings (Second Revision) |
CED 24 |
|
14 |
IS 6295 : 1986 |
Code of practice for water supply and drainage in high altitudes and/or sub - Zero temperature regions (First Revision) |
CED 24 |
|
15 |
IS 7558 : 1974 |
Code of practice for domestic hot water installations |
CED 24 |
|
16 |
IS 1742 : 1983 |
Code of practice for building drainage (second revision) |
CED 24 |
|
17 |
IS 2470 : Part 1 : 1985 |
Code of practice for installation of septic tanks: Part 1 design criteria and construction (Second Revision) |
CED 24 |
|
18 |
IS 2470 : Part 2 : 1985 |
Code of practice for installation of septic tanks: Part 2 secondary treatment and disposal of septic tank effluent (Second Revision) |
CED 24 |
|
19 |
IS 5611 : 1987 |
Code of practice for construction of waste stabilization ponds (Faculative Type) (First Revision) |
CED 24 |
|
20 |
IS 5329 : 1983 |
Code of practice for sanitary pipe work above ground for buildings |
CED 24 |
|
21 |
IS 2084 : 1991 |
Code for designation of pig iron (Second Revision) |
MTD 6 |
|
22 |
IS 8835 : 1978 |
Guidelines for planning and design of surface drains |
WRD 13 |
|
23 |
IS 6924 : 1973 |
Code of practice for the construction of refuse chutes in multistoreyed buildings |
CED 24 |
|
24 |
IS 1200 : Part 1 : 1992 |
Methods of measurement of building and civil engineering works: Part 1 earthwork |
CED 44 |
|
25 |
IS 1200 : Part 16 : 1979 |
Methods of measurement of building and civil engineering works: Part 16 laying of water and sewer lines including appurtenant items (Third Revision) |
CED 44 |
|
26 |
IS 1200 : Part 19 : 1981 |
Method of measurement of building and civil engineering works: Part 19 water supply, plumbing and drains |
CED 44 |
|
27 |
IS 10446 : 1983 |
Glossary of terms relating to water supply and sanitation |
CED 24 |
|
28 |
IS 1536 : 2001 |
Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage - Specification (Fourth Revision) |
MTD 6 |
|
29 |
IS 6163 : 1978 |
Centrifugaly cast (spun) iron low pressure pipes for water, gas and sewage |
MTD 6 |
|
30 |
IS 8329 : 2000 |
Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision) |
MTD 6 |
|
31 |
IS 1537 : 1976 |
Specification for vertically cast iron pressure pipes for water, gas and sewage (First Revision) |
MTD 6 |
|
32 |
IS 1729 : 2002 |
Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipeline socket and spigot series (Second Revision) |
MTD 6 |
|
33 |
IS 3486 : 1966 |
Cast Iron Spigot And Socket Drain Pipes |
MTD 6 |
|
34 |
IS 7181 : 1986 |
Specification for horizontally cast iron double flanged pipes for water, gas and sewage (First Revision) |
MTD 6 |
|
35 |
IS 3989 : 2009 |
Centrifugally cast (Spun) iron spigot and socket soil, waste, ventilating and rainwater pipes, fittings and accessories - Specification (Third Revision) |
MTD 6 |
|
36 |
IS 1879 : 2010 |
Malleable cast iron pipe fittings - Specification (Third Revision) |
MTD 6 |
|
37 |
IS 1538 : 1993 |
Cast iron fittings for pressure pipes for water, gas and sewage - Specification (Third Revision) |
MTD 6 |
|
38 |
IS 1230 : 1979 |
Cast iron rainwater pipes and fittings |
MTD 6 |
|
39 |
IS 6418 : 1971 |
Specification for cast iron and malleable cast iron flanges for general engineering purposes |
MTD 6 |
|
40 |
IS 3114 : 1994 |
Code of practice for laying of cast iron pipes |
CED 24 |
|
41 |
IS 782 : 1978 |
Specification for caulking lead (Third Revision) |
CED 3 |
|
42 |
IS 3589 : 2001 |
Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision) |
MTD 19 |
|
43 |
IS 1239 : Part 1 : 2004 |
Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision) |
MTD 19 |
|
44 |
IS 1239 : Part 2 : 2011 |
Steel tubes, tubulars and other steel fittings - Specification: Part 2 steel pipe fittings (Fifth Revision) |
MTD 19 |
|
45 |
IS 6631 : 1972 |
Steel Pipes for Hydraulic Purposes |
MTD 19 |
|
46 |
IS 6392 : 2020 |
Steel Pipes Flanges — Specification ( First Revision ) |
MTD 19 |
|
47 |
IS 2479 : 1981 |
Colour code for identification of aluminium and aluminium alloys for general engineering purposes (Second Revision) |
MTD 7 |
|
48 |
IS 4270 : 2001 |
Steel tubes used for water wells specification (Third Revision) |
MTD 19 |
|
49 |
IS 806 : 1968 |
Code of practice for use of steel tubes in general building construction |
CED 7 |
|
50 |
IS 5822 : 1994 |
Code of practice for laying of electrically welded steel pipes for water supply (Second Revision) |
CED 24 |
|
51 |
IS 2800 : Part 1 : 1991 |
Code of Practice for Construction and Testing of Tubewells/Borewells - Part 1 : Construction |
MED 21 |
|
52 |
IS 2800 : Part 2 : 1979 |
Code of Practice Construction and Testing - Part II : Testing |
MED 21 |
|
53 |
IS 8110 : 2019 |
Water well screens and slotted pipes - Specification (Third Revision) |
MED 21 |
|
54 |
IS 6935 : 1973 |
Method for determination of water level in a bore hole |
WRD 5 |
|
55 |
IS 4097 : 2019 |
Specification for material (Gravel) for use as filter pack in tubewells (First Revision) |
MED 21 |
|
56 |
IS 6908 : 1991 |
Asbestos - Cement pipes and fitkIngs for sewerage and drainage - Specification (First Revision) |
CED 53 |
|
57 |
IS 1592 : 2003 |
Asbestos cement pressure pipes and joints - Specification (Fourth Revision) |
CED 53 |
|
58 |
IS 1626 : Part 1 : 1994 |
Asbestos cement building pipes and pipe fittings, gutters and gutter fittings and roofing fitting: Part 1 pipe and pipe fittings (Second Revision) |
CED 53 |
|
59 |
IS 8794 : 1988 |
Specification for cast iron detachable joints for use with asbestos cement pressure pipes (First Revision) |
MTD 6 |
|
60 |
IS 5531 : 2014 |
Cast iron specials for asbestos cement pressure pipes for water and sewage - Specification (Third Revision) |
MTD 6 |
|
61 |
IS 6530 : 1972 |
Code of practice for laying of asbestos cement pressure pipes |
CED 53 |
|
62 |
IS 1916 : 2018 |
Steel cylinder pipes with concrete lining and coating - Specification (Second Revision) |
CED 53 |
|
63 |
IS 7322 : 1985 |
specials for steel cylinder reinforced concrete pipes |
CED 53 |
|
64 |
IS 458 : 2003 |
Precast concrete pipes(With And Without Reinforcement) - Specification (Fourth Revision) |
CED 53 |
|
65 |
IS 4350 : 1967 |
concrete porous pipes for under-drainage |
CED 53 |
|
66 |
IS 3597 : 1998 |
Concrete pipes - Methods of test |
CED 53 |
|
67 |
IS 784 : 2019 |
Prestressed concrete pipes (Including Specials) - Specification (Third Revision) |
CED 53 |
|
68 |
IS 7319 : 1974 |
perforated concrete pipes |
CED 53 |
|
69 |
IS 783 : 1985 |
Code of Practice for Laying of Concrete Pipes |
CED 53 |
|
70 |
IS 7634 : Part 1 : 1975 |
Code of practice for plastic pipes work for potable water supplies: Part 1 Choice of materials and general recommendations |
CED 50 |
|
71 |
IS 4984 : 2016 |
Polyethylene pipes for water supply - Specification (Fifth Revision) |
CED 50 |
|
72 |
IS 8008 : Part 1 : 2003 |
Injection moulded/machined high density polyethylene (HDPE) fittings for potable water supplies - Specification: Part 1 general requirements for fittings (First Revision) |
CED 50 |
|
73 |
IS 8008 : Part 2 : 2003 |
Injection moulded/machined high density polyethylene (HDPE) fittings for potable water supplies - Specification: Part 2 specific requirements for 90° bend (First Revision) |
CED 50 |
|
74 |
IS 8008 : Part 3 : 2003 |
Injection Moulded/Machined High Density Polyethylene (HDPE) Fittings for Potable Water Supplies - - Part 3 : Specific Requirements for 90° TEES |
CED 50 |
|
75 |
IS 8008 : Part 4 : 2003 |
Injection moulded/machined high density polyethylene (HDPE) fittings for potable water supplies - Specification: Part 4 specific requirements for reducers (First Revision) |
CED 50 |
|
76 |
IS 8008 : Part 5 : 2003 |
Injection moulded/machined high density polyethylene (HDPE) fittings for potable water supplies - Specification: Part 5 specific requirements for ferrule reducers (First Revision) |
CED 50 |
|
77 |
IS 8008 : Part 6 : 2003 |
Injection moulded/machined high density polyethylene (HDPE) fittings for potable water supplies - Specification: Part 6 specific requirements for pipe ends (First Revision) |
CED 50 |
|
78 |
IS 8008 : Part 7 : 2003 |
Injection ivIoulded/machined high density polyethylene (HDPE) fittings for potable water supplies - Specification: Part 7 specific requirements for sandwich flanges (First Revision) |
CED 50 |
|
79 |
IS 3076 : 1985 |
Low Density Polyethylene Pipes for Potable Water Supplies |
CED 50 |
|
80 |
IS 4985 : 2000 |
Unplasticized pvc pipes for potable water supplies - Specification (Third Revision) |
CED 50 |
|
81 |
IS 7834 : Part 1 : 1987 |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements |
CED 50 |
|
82 |
IS 7834 : Part 2 : 1987 |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows |
CED 50 |
|
83 |
IS 7834 : Part 3 : 1987 |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows |
CED 50 |
|
84 |
IS 7834 : Part 4 : 1987 |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees |
CED 50 |
|
85 |
IS 7834 : Part 5 : 1987 |
Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees |
CED 50 |
|
86 |
IS 7834 : Part 6 : 1987 |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets |
CED 50 |
|
87 |
IS 7834 : Part 7 : 1987 |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions |
CED 50 |
|
88 |
IS 7834 : Part 8 : 1987 |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps |
CED 50 |
|
89 |
IS 2501 : 1995 |
Solid drawn copper tubesfor general engineering purposes - Specification (Third Revision) |
MTD 8 |
|
90 |
IS 404 : Part 1 : 1993 |
Lead pipes - Specification: Part 1 for other than chemical purposes (Third Revision) |
MTD 9 |
|
91 |
IS 404 : Part 2 : 1993 |
Lead pipes - Specification: Part 2 for chemical purposes (Third Revision) |
MTD 9 |
|
92 |
IS 651 : 2007 |
Glazed stoneware pipes and fittings - Specification (Sixth Revision) |
CED 3 |
|
93 |
IS 3006 : 1979 |
Specification for chemically resistant glazed stoneware pipes and fittings (first revision) |
CED 3 |
|
94 |
IS 4127 : 1983 |
Code of practice for laying of glazed stoneware pipes (First Revision) |
CED 24 |
|
95 |
IS 2527 : 1984 |
Code of practice for fixing rainwater gutters and downpipes for roof drainage (First Revision) |
CED 13 |
|
96 |
IS 7740 : 1985 |
Code of practice for construction and maintenance of road gullies (First Revision) |
CED 24 |
|
97 |
IS 780 : 1984 |
sluice valves for water works purposes (50 to 300 mm size) |
CED 3 |
|
98 |
IS 2906 : 1984 |
Sluice Valves for Water Works Purposes (350 to 1200 mm Size) |
CED 51 |
|
99 |
IS 2685 : 1971 |
Code of practice for selection, installation and maintenance of sluice valves (First Revision) |
CED 3 |
|
100 |
IS 3042 : 1965 |
Specification for single faced sluice gates (200 to 1200 mm) |
CED 3 |
|
101 |
IS 5712 : 1970 |
Specification for slickers for leather industry |
CHD 17 |
|
102 |
IS 1703 : 2000 |
Water fittings - copper alloy float valves (horizontal plunger type) - Specification (fourth revision) |
CED 3 |
|
103 |
IS 5240 : 1969 |
SpeclFication for cast skew bollards |
TED 17 |
|
104 |
IS 4038 : 1986 |
Specification for foot valves for water works purposes (second revision) |
CED 3 |
|
105 |
IS 1701 : 1960 |
Specification for mixing valves for ablutionary and doimestic purposes |
CED 3 |
|
106 |
IS 778 : 1984 |
Specification for copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision) |
CED 3 |
|
107 |
IS 3950 : 1979 |
Specification for surface boxes for sluice valves (first revision) |
CED 3 |
|
108 |
IS 779 : 1994 |
Water meters (Domestic Type) - Specification (Sixth Revision) |
CED 3 |
|
109 |
IS 2373 : 1981 |
Specification for water meters (bulk type) (third revision) |
CED 3 |
|
110 |
IS 2104 : 1981 |
water meter boxes (domestic type) |
CED 3 |
|
111 |
IS 6784 : 1996 |
Methods for performance testing of water meters (Domestic Type) (Second Revision) |
CED 3 |
|
112 |
IS 2401 : 1973 |
Code of practice for selection, installation and maintenance of domestic water meters |
CED 3 |
|
113 |
IS 8931 : 1993 |
copper alloy fancy single taps, combination tap assembly and stop valves for water services |
CED 3 |
|
114 |
IS 8934 : 1978 |
Cast copper alloy fancy pillar taps for water services |
CED 3 |
|
115 |
IS 781 : 1984 |
Specification for cast copper alloy screw down bib taps and stop valves for water services (Third Revision) |
CED 3 |
