| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 16855 : Part 1 : 2018 |
Current and voltage sensors or detectors, to be used for fault passage indication purposes: Part 1 general principles and requirements |
ETD 34 |
| 2 |
IS 16803 : 2018 |
High Voltage Test Techniques - Measurement of Partial Discharges by Electreomagnetic and Acoustic Methods |
ETD 19 |
| 3 |
IS 14700 : Part 4 : Sec 1 : 2019 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 1 overview of the IEC 61000 - 4 series (Second Revision) |
LITD 9 |
| 4 |
IS 15086 : Part 9 : 2019 |
Surge arresters: Part 9 metal - Oxide surge arresters without gaps for HDVC converter stations |
ETD 30 |
| 5 |
IS/ISO 1997 : 1992 |
Granulated Cork and Cork Powder - Classification , Properties and Packing |
MED 30 |
| 6 |
IS 2026 : Part 3 : 2018 |
Power transformers: Part 3 insulation levels, dielectric tests and external clearances in air (Fourth Revision) |
ETD 16 |
| 7 |
IS 15909 : 2010 |
PVC GEO - Membranes for Lining |
TXD 30 |
| 8 |
IS 13360 : Part 8 : Sec 13 : 2021 |
Plastics Methods Of Testing Part 8 Permanence chemical Properties Section 13 Determination of Changes in Colour and Variations in Properties After Exposure to Daylight Under Glass Natural Weathering or Laboratory Light Sources First Revision of IS 1 |
PCD 27 |
| 9 |
IS 15382 : Part 1 : 2014 |
Insulation coordination for equipment within low - Voltage systems: Part 1 principles, requirements and tests (First Revision) |
ETD 19 |
| 10 |
IS/IEC 62271 : PART 100 : 2008 |
High - Voltage Switchgear and Controlgear Part 100 Alternating - Current Circuit - Breakers |
ETD 08 |
| 11 |
IS/IEC 62271 : Part 111 : 2012 |
High - Voltage switchgear and controlgear: Part 111 automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV |
ETD 8 |
| 12 |
IS/IEC 62271 : Part 203 : 2011 |
High - Voltage switchgear and controlgear: Part 203 gas - Insulated metal - Enclosed switchgear for rated voltages above 52 kV (First Revision) |
ETD 8 |
| 13 |
IS/IEC 62271 : Part 200 : 2011 |
High-Voltage Switchgear and Controlgear Part 200 a.c. Metal-Enclosed Switchgear and Controlgear for Rated Voltages Above 1 kV Up to and Including 52 kV ( First Revision ) |
ETD 8 |
| 14 |
IS/IEC 62271 : PART 109 : 2008 |
High - Voltage Switchgear and Controlgear Part 109 Alternating - Current Series Capacitor by - Pass Switches |
ETD 08 |
| 15 |
IS/IEC 62271 : PART 1 : 2007 |
High - Voltage switchgear and controlgear: Part 1 common specifications |
ETD 8 |
| 16 |
IS 17896 : Part 2 : 2022 |
Electric vehicle battery swap system - Part 2: Safety requirements |
ETD 51 |
| 17 |
IS 8792 : 1995 |
Line traps for AC power systems specification (First Revision) |
LITD 10 |
| 18 |
IS 9431 : 1979 |
Specification for indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to and including 300 kV |
ETD 6 |
| 19 |
IS/ISO 16322 Part 3 : 2021 |
Textiles - Determination of spirality after laundering Part 3 Woven and knitted garments (first revision) |
TXD 1 |
| 20 |
IS/ISO 41014 : 2020 |
Facility management - Development of a facility management strategy |
MSD 12 |
| 21 |
IS 15617 : 2017 |
Static var compensators (Svc) testing of thyristor valves (First Revision) |
ETD 40 |
| 22 |
IS 4929 : 2023 |
Dichlorvos, technical - Specification (Second Revision) |
FAD 1 |
| 23 |
IS 15199 : Part 1 : 2002 |
Power convertors installed on board rolling stock: Part 1 characteristics and test methods |
ETD 31 |
| 24 |
IS 15843 : Part 2 : 2023 |
SNOWBOARDS BINDING MOUNTING AREA PART 2: REQUIREMENTS AND TEST METHODS FOR SNOWBOARDS WITH INSERTS First revision |
PGD 27 |
| 25 |
IS 16075 : 2013 |
Voltage sourced converter (Vsc) valves for high - Voltage direct current (Hvdc) power transmission - Electrical testing |
ETD 40 |
