| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS/IEC 62305 : Part 4 : 2010 |
Protection against lightning: Part 4 electrical and electronic systems within stuctures |
ETD 20 |
| 2 |
IS 16227 : Part 6 : 2018 |
Instrument transformers: Part 6 additional general requirements for low - Power instrument transformers |
ETD 34 |
| 3 |
IS 16855 : Part 1 : 2018 |
Current and voltage sensors or detectors, to be used for fault passage indication purposes: Part 1 general principles and requirements |
ETD 34 |
| 4 |
IS 14700 : Part 4 : Sec 25 : 2018 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 25 HEMP immunity test methods for equipment and systems |
LITD 9 |
| 5 |
IS 15039 : 2018 |
Information technology equipment - Immunity characteristics - Limits and methods of measurement (First Revision) |
LITD 9 |
| 6 |
IS 14481 : Part 1 : 2018 |
Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post - Accident conditions: Part 1 general requirements |
LITD 8 |
| 7 |
IS 12761 : Part 2 : 2018 |
Equipment for continuous monitoring of radioactivity in gaseous effluents: Part 2 specific requirements for radioactive aerosol monitors including transuranic aerosols (First Revision) |
LITD 8 |
| 8 |
IS 16835 : Part 3 : 2018 |
Safety of machinery - Pressure - Sensitive protective devices: Part 3 general principles for design and testing of pressure - Sensitive bumpers, plates, wires and similar devices |
MED 40 |
| 9 |
IS 16835 : Part 1 : 2018 |
Safety of machinery - Pressure - Sensitive protective devices: Part 1 general principles for design and testing of pressure - Sensitive mats and pressure - Sensitive floors |
MED 40 |
| 10 |
IS 16835 : Part 2 : 2018 |
Safety of machinery - Pressure - Sensitive protective devices: Part 2 general principles for design and testing of pressure - Sensitive edges and pressure - Sensitive bars |
MED 40 |
| 11 |
IS 14700 : Part 4 : Sec 1 : 2019 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 1 overview of the IEC 61000 - 4 series (Second Revision) |
LITD 9 |
| 12 |
IS 11866 : 2018 |
Radiation protection instrumentation - Alpha, beta and alpha/beta (Beta Energy > 60 KeV) contamination meters and monitors (First Revision) |
LITD 8 |
| 13 |
IS/IEC 60947 : PART 4 : Sec 3 : 2014 |
Low - Voltage switchgear and controlgear: Part 4 contactors and motor - Starters: Sec 3 a.c. semiconductor motor controllers and contractors for non - Motor loads (Second Revision) |
ETD 7 |
| 14 |
IS 17008 : 2019 |
Weigh-in-Motion System for Road Vehicles Specification |
PGD 26 |
| 15 |
IS 14700 : Part 6 : Sec 1 : 2019 |
Electromagnetic Compatibility ( EMC ) Part 6 Generic Standards Section 1 Immunity standard for residential, commercial and light-industrial environments ( First Revision ) |
LITD 9 |
| 16 |
IS 14700 : Part 6 : Sec 2 : 2019 |
Electromagnetic Compatibility ( EMC ) Part 6 Generic Standards Section 2 Immunity standard for industrial environments ( First Revision ) |
LITD 9 |
| 17 |
IS 17017 : Part 21 : Sec 1 : 2019 |
Electric Vehicle Conductive Charging System Part 21 Electromagnetic Compatibility ( EMC ) Requirements Section 1 On-board chargers |
ETD 51 |
| 18 |
IS 17017 : Part 21 : Sec 2 : 2019 |
Electric Vehicle Conductive Charging System Part 21 Electromagnetic Compatibility ( EMC ) Requirements Section 2 Off-board chargers |
ETD 51 |
| 19 |
IS/IEC 61204 : Part 3 : 2016 |
Low-Voltage Switch Mode Power Supplies Part 3 Electromagnetic Compatibility ( EMC ) |
ETD 31 |
| 20 |
IS/IEC 61800 : Part 3 : 2017 |
Adjustable Speed Electrical Power Drive Systems Part 3 EMC Requirements and Specific Test Methods |
ETD 31 |
| 21 |
IS/IEC 60255 : Part 26 : 2013 |
Measuring Relays and Protection Equipment Part 26 Electromagnetic Compatibility Requirements ( First Revision ) |
ETD 35 |
| 22 |
IS 16242 : Part 2 : 2020 |
Uninterruptible Power Systems UPS Part 2 Electromagnetic Compatibility EMC Requirements ( First Revision ) |
ETD 31 |
| 23 |
IS/IEC 61800 : Part 5 : Sec 2 : 2020 |
Adjustable Speed Electrical Power Drive Systems Part 5 Safety Requirements Section 2 Functional |
ETD 31 |
| 24 |
IS/IEC 61757 : 2018 |
Fibre Optic Sensors - Generic Specification |
LITD 11 |
| 25 |
IS/IEC 60947 : Part 2 : 2016 |
Low - Voltage switchgear and controlgear: Part 2 circuit - Breakers (First Revision) |
ETD 7 |
| 26 |
IS 15382 : Part 2 : Sec 2 : 2018 |
Insulation Coordination for Equipment within Low-Voltage Systems Part 2 Interface Considerations Section 2 Application guide |
ETD 19 |
| 27 |
IS 13779 : 1999 |
AC static watihour meters, class 1 and 2 - Specification (First Revision) |
ETD 13 |
| 28 |
IS 3470 : 2002 |
Hexane, Food Grade |
PCD 3 |
| 29 |
IS 14697 : 1999 |
AC static transformer operated , watthour and var - Hour meters, class 0.2 S and 0.5 S - Specification |
ETD 13 |
| 30 |
IS 1180 : Part 3 : 2021 |
Outdoor/Indoor Type Liquid Immersed Distribution Transformers Up to and Including 2 500 kVA, 33 kV — Specification Part 3 Natural/Synthetic Organic Ester Liquid Immersed |
ETD 16 |
| 31 |
IS 16249 : Part 1 : 2021 |
Gas Analysis Preparation of Calibration Gas Mixtures Using Dynamic Methods Part 1 General Aspects |
CHD 6 |
| 32 |
IS 17691 : Part 2 : 2021 |
ROBOTICS SAFETY DESIGN FOR INDUSTRIAL ROBOT SYSTEMS PART 2: MANUAL LOADUNLOAD STATIONS |
PGD 18 |
| 33 |
IS 12746 : Part 2 : 1989 |
Telecontrol equipment and systems: Part 2 environmental conditions and power supplies |
LITD 10 |
| 34 |
IS/IEC 60947 : PART 3 : 2012 |
Low - Voltage switchgear and controlgear: Part 3 switches, disconnectors, switch disconnectors and fuse - Combination units (First Revision) |
ETD 7 |
| 35 |
IS/IEC 60947 : Part 5 : Sec 1 : 2009 |
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision) |
ETD 7 |
| 36 |
IS/IEC 60669 : Part 2 : Sec 1 : 2008 |
Switches for Household and Similar Fixed Electrical Installations Part 2 Particular Requirements Section 1 Electronic Switches |
ETD 14 |
| 37 |
IS 14614 : 1998 |
Residual current - Operated protective devices (Rcds) for household and similar use - Electromagnetic compatibility |
ETD 7 |
| 38 |
IS 14614 : 1998 |
Residual current - Operated protective devices (Rcds) for household and similar use - Electromagnetic compatibility |
ETD 7 |
| 39 |
IS/IEC 61439 : Part 1 : 2011 |
Low-Voltage Switchgear and Controlgear Assemblies Part 1 General Rules |
ETD 7 |
| 40 |
IS 17706 : 2022 |
PULL HANDLES SPECIFICATION |
CED 15 |
| 41 |
IS 3160 : 2022 |
Tur Chuni as Livestock Feed Ingredient � Specification |
FAD 5 |
| 42 |
IS 15884 : 2010 |
Alternating current direct connected static prepayment meters for active energy (Class 1 And 2) - Specification |
ETD 13 |
| 43 |
IS 302 : Part 1 : 2008 |
Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision) |
ETD 32 |
| 44 |
IS 302 : Part 1 : 2008 |
Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision) |
ETD 32 |
| 45 |
IS 18158 : 2023 |
Textile Floor Covering - Artificial Grass Carpet made of Synthetic Yarn for Landscape Specification |
TXD 4 |
| 46 |
IS 15399 : 2003 |
Hardware for computers in the safety system of nuclear and radiation facilities |
LITD 8 |
| 47 |
IS 9203 : Part 4 : 2023 |
FRICTION ROLLERS FOR MINE HAULAGE TRACKS SPECIFICATION PART 4 ROLLERS WITH NON-METALLIC ROPE BEARING SURFACES First Revision of IS 9203 Part 4 |
MED 8 |
| 48 |
IS 9203 : Part 4 : 2023 |
FRICTION ROLLERS FOR MINE HAULAGE TRACKS SPECIFICATION PART 4 ROLLERS WITH NON-METALLIC ROPE BEARING SURFACES First Revision of IS 9203 Part 4 |
MED 8 |
| 49 |
IS 9203 : Part 4 : 2023 |
FRICTION ROLLERS FOR MINE HAULAGE TRACKS SPECIFICATION PART 4 ROLLERS WITH NON-METALLIC ROPE BEARING SURFACES First Revision of IS 9203 Part 4 |
MED 8 |
