| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 1448 : Part 183 : 2021 |
Methods of test for petroleum and its part 183 Petroleum and related Products -Determination of wick flame persistence of fire-resistant Fluids |
PCD 1 |
| 2 |
IS 11169 : Part 1 : 1984 |
Specification for steels for cold heading/cold extrusion applications: Part 1 wrought carbon and low alloy steels |
MTD 16 |
| 3 |
IS 5484 : 1997 |
Ec grade aluminium rod produced by continuous casting and rolling - Specification (Second Revision) |
MTD 7 |
| 4 |
IS 1285 : 2002 |
Wrought aluminium and aluminium alloys - Extruded round tube and hollow sections for general engineering purposes - Specification (Third Revision) |
MTD 7 |
| 5 |
IS 1536 : 2001 |
Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage - Specification (Fourth Revision) |
MTD 6 |
| 6 |
IS 9997 : 1991 |
Aluminium alloy redraw rods for electrical purposes - Specification (First Revision) |
MTD 7 |
| 7 |
IS 14190 : 1995 |
Combination wire ropes for fishing purposes - Specification |
TXD 18 |
| 8 |
IS/ISO 21720 : 2017 |
XLIFF (XML Localisation interchange file format) |
SSD 9 |
| 9 |
IS 8748 : 1978 |
Specification for forged/rolled CTC segments |
MTD 16 |
| 10 |
IS 15450 : 2022 |
Polyethylene-Aluminium-Polyethylene Composite Pressure Pipes for Hot and Cold Water Supplies -Specifications (First Revision) |
CED 50 |
| 11 |
IS/ISO/IEC 19086 : Part 3 : 2017 |
Information Technology Cloud Computing Service Level Agreement SLA Framework Part 3 : Core conformance requirements |
SSD 10 |
| 12 |
IS/ISO/IEC/TR 23187 : 2020 |
Information Technology Cloud Computing Interacting with Cloud Service Partners CSNs |
SSD 10 |
| 13 |
IS 17631 : 2022 |
Work Chairs - Specification |
CED 35 |
| 14 |
IS 6913 : 1973 |
Specification for stainless steel tubes for the food and beverage industry |
MTD 19 |
| 15 |
IS 8139 : 1976 |
Specification for picking cone and bolt for looms |
TXD 14 |
| 16 |
IS 7494 : 1981 |
Specification for steel for valves for internal combustion engines (First Revision) |
MTD 16 |
| 17 |
IS 11169 : Part 2 : 1989 |
Steels for cold heading/cold extrusion applicationsspecification: Part 2 stainless steels |
MTD 16 |
| 18 |
IS 16172 : 2014 |
Reinforcement couplers for mechanical splices of bars in concrete - Specification |
CED 54 |
| 19 |
IS 11084 : 1984 |
Specification for silver palladium alloy wire and strip for electrical contacts |
MTD 10 |
| 20 |
IS 17902 : 2022 |
Animal feeding stuffs Determination of amylase-treated neutral detergent fibre content ANDF |
FAD 5 |
| 21 |
IS 2741 : 2022 |
Napthol - specification (fourth Revision) |
PCD 26 |
| 22 |
IS 2744 : 2022 |
1-Naphthylamine (Second Revision) |
PCD 26 |
| 23 |
IS 8631 : 1977 |
Specification for copper base alloys for marine propellers |
MTD 8 |
| 24 |
IS 8859 : 1978 |
Specification for cast copper tuyere |
MTD 8 |
| 25 |
IS 3039 : 1988 |
Specification for structural steel for construction of hulls of ships (Second Revision) |
MTD 4 |
| 26 |
IS 648 : 2022 |
Cold rolled non-oriented electrical steel sheet and strip - Fully processed type - Specification Sixth Revision |
MTD 4 |
| 27 |
IS 11636 : 2022 |
Textile Dyestuffs - Methods for Determination of Strength of Indigo in Substance (First Revision) |
TXD 7 |
| 28 |
IS 1284 : 1975 |
Specification for wrought aluminium alloy bolt and screw stock (for general engineering purposes) (Second Revision) |
MTD 7 |
| 29 |
IS 6603 : 2001 |
Stainless steel bars and flats - Specification (First Revision) |
MTD 16 |
| 30 |
IS/ISO 14852 : 2021 |
Determination of the Ultimate Aerobic Biodegradability of Plastic Materials in an Aqueous Medium Method by Analysis of Evolved Carbon Dioxide First Revision |
PCD 27 |
| 31 |
IS 617 : 1994 |
Cast aluminium and its alloys - Ingots and castings for general engineering purposes - Specification (Third Revision) |
MTD 7 |
| 32 |
IS 5321 : 2022 |
Specification for Soda lime as Carbon dioxide absorbent (first revision) |
CHD 1 |
| 33 |
IS/ISO 5832-9 : 2007 |
Implants for surgery - Metallic materials Part 9 wrought high nitrogen stainless steel |
MHD 2 |
| 34 |
IS 3600 : Part 4 : 1984 |
Method of testing fusion welded joints and weld metal in steel: Part 4 longitudinal tensile test on cylindrical all weld metal test pieces using butt joints (Second Revision) |
MTD 11 |
| 35 |
IS 17003 : Part 3 : 2022 |
Nanotechnologies Vocabulary Part 3: Carbon nano-objects |
MTD 33 |
| 36 |
IS 11286 : 1995 |
Corrosion resistant high alloy steel, nickel base and cobalt base investment castings for severe applications - Specification (First Revision) |
MTD 14 |
| 37 |
IS 2002 : 2009 |
Steel plate for pressure vessel for intermediate and high temperature service including boilers (Third Revision) |
MTD 4 |
| 38 |
IS 2041 : 2009 |
Steel plates for pressure vessels used at moderate and low temperature - Specification (Third Revision) |
MTD 4 |
| 39 |
IS 3593 : 2022 |
Solvent Extracted Rice Bran (DeOiled Rice Bran) as Livestock Feed Ingredient � Specification |
FAD 5 |
| 40 |
IS 3626 : 2001 |
Locked coil winding ropes - Specification (Second Revision) |
MED 10 |
| 41 |
IS/ISO 10987 : Part 2 : 2017 |
Earth - Moving Machinery — Sustainability Part 2 Remanufacturing |
MED 7 |
| 42 |
IS 4448 : 2022 |
Benzoic Acid Food Grade - Specification |
FAD 8 |
| 43 |
IS 737 : 2008 |
Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes - Specification (Fourth Revision) |
MTD 7 |
| 44 |
IS 13730 : Part 0 : Sec 2 : 2018 |
Specifications for particular types of winding wires: Part 0 general requirements: Sec 2 enamelled rectangular copper wire (Second Revision) |
ETD 33 |
| 45 |
IS 9282 : 2002 |
Wire ropes and strands for suspension bridges - Specification (First Revision) |
MED 10 |
| 46 |
IS 12300 : 1988 |
Valve fittings for refrigerant cylinders - Specification |
MED 16 |
| 47 |
IS 2365 : 2018 |
Steel wire suspension ropes for lifts, elevators and hoists - Specification (Second Revision) |
MED 10 |
| 48 |
IS 3745 : 2006 |
Yoke type valve connections for small medical gas cylinders - Specification (Second Revision) |
MED 16 |
| 49 |
IS 6594 : 2018 |
Technical supply conditions for steel wire ropes and strands (Third Revision) |
MED 10 |
| 50 |
IS 8776 : 1988 |
Specification for valve fittings for use with liquefied petroleum gas (LPG) cylinders up to and including 5 - Litre water capacity (First Revision) |
MED 16 |
| 51 |
IS 9295 : 1983 |
Specification for steel tubes for idlers for belt conveyors (First Revision) |
MTD 19 |
| 52 |
IS 4462 : 1974 |
Specification for contact wire healds for jute weaving (first revision) |
TXD 14 |
| 53 |
IS 4161 : 2023 |
NESSLER CYLINDER - SPECIFICATION (First Revision) |
CHD 10 |
| 54 |
IS 247 : 2023 |
SODIUM SULPHITE, ANHYDROUS ─ SPECIFICATION (Fifth Revision) |
CHD 1 |
| 55 |
IS 1367 : Part 6 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision) |
PGD 37 |
| 56 |
IS 5872 : 1990 |
Cold rolled steel strips (Box Strappings) - Specification |
MTD 4 |
| 57 |
IS 3600 : Part 3 : 2018 |
Method of testing fusion welded joints and weld metal in steel: Part 3 destructive tests on welds in metallic materials - Transverse tensile test (Fourth Revision) |
MTD 11 |
| 58 |
IS/IEC 60695 : Part 2 : Sec 11 : 2021 |
Fire Hazard Testing Part 2: Glowinghot-wire based test methods Section 11: Glow-wire flammability test method for end products GWEPT |
LITD 1 |
| 59 |
IS/IEC 60440 : 2012 |
Method of measurement of non-linearity in resistors |
LITD 5 |
| 60 |
IS 1946 : 1961 |
Code of practice for use of fixtng devices in walls, ceilings and floors of solid construction |
CED 13 |
| 61 |
IS 18057 : Part 3 : 2023 |
Woodworking Machines Safety Part 3: Numerically Controlled NC Boring and Routing Machines |
PGD 35 |
| 62 |
IS 6751 : 1972 |
Specification for aluminium alloy castings and strips for bearings |
MTD 7 |
| 63 |
IS 14712 : 1999 |
Wrought aluminium and its alloys - Chequered/tread sheets for general engineering purposes - Specification |
MTD 7 |
| 64 |
IS 6912 : 2005 |
Copper and copper alloys forging stock and forging - Specification (Second Revision) |
MTD 8 |
| 65 |
IS 8362 : 1977 |
Specification for copper and copper alloy rolled plates for condensers and heat exchangers |
MTD 8 |
| 66 |
IS/IEC/TS 61400 : Part 13 : 2015 |
WIND TURBINES PART 13: MEASUREMENT OF MECHANICAL LOADS |
ETD 42 |
| 67 |
IS 12045 : 1987 |
Specification for alloys used in electrical resistance metallic heating elements |
MTD 16 |
| 68 |
IS 11312 : Part 1 : 1985 |
Specification for external upset drill pipe assemblies for use in water well drilling: Part 1 screwed on joints drill pipe |
MED 21 |
| 69 |
IS 624 : 2003 |
Bicycles - Rims - Specification (Fourth Revision) |
TED 16 |
| 70 |
IS 15961 : 2012 |
Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain) |
MTD 4 |
