| SNo |
IS Number |
Title |
Technical Committee |
|
1 |
IS 3722 : Part 1 : 2023 |
LETTER SYMBOLS AND SIGNS USED IN ELECTRICAL TECHNOLOGY - PART 1: GENERAL (Second Revision) |
ETD 1 |
|
2 |
IS 12360 : 1988 |
Voltage bands for electrical installations including preferred voltages and frequency |
ETD 1 |
|
3 |
IS/IEC 60068 : Part 2 : Sec 6 : 2007 |
Environmental Testing Part 2 Tests Section 6 Test Fc: Vibration sinusoidal |
LITD 1 |
|
4 |
IS 9000 : Part 4 : 2020 |
Environmental Testing Part 4 Tests - Test Cab: Damp Heat, Steady State ( Second Revision ) |
LITD 1 |
|
5 |
IS/IEC 60073 : 2002 |
Basic and safety principles for man-machine interface marking and identification - Coding principles for indicators and actuators |
ETD 1 |
|
6 |
IS 1271 : 2012 |
Electrical insulation - Thermal evaluation and designation (Second Revision) |
ETD 2 |
|
7 |
IS 4545 : Part 13 : 2023 |
Methods of Measurement on Receivers for Television Broadcast Transmissions Part 13: General Considerations - Measurements at Radio and Video Frequencies |
LITD 07 |
|
8 |
IS 694 : 2010 |
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1 100 V (Fourth Revision) |
ETD 9 |
|
9 |
IS 9968 : Part 1 : 1988 |
Specification for elastomer insulated cables: Part 1 for working voltages up to and including 1 100 volts (First Revision) |
ETD 9 |
|
10 |
IS 15596 : Part 1 : 2005 |
Sound System Equipment Part 1: General |
LITD 7 |
|
11 |
IS 13730 : Part 43 : 2013 |
Specification for particular types of winding wires: Part 43 aromatic polyimide tape wrapped round copper wire, class 240 (First Revision) |
ETD 33 |
|
12 |
IS/IEC 60320 : PART 1 : 2021 |
Appliance couplers for household and similar general purposes Part 1: General requirements Second Revision |
ETD 14 |
|
13 |
IS 15382 : Part 1 : 2022 |
Insulation Coordination for Equipment Within Low-Voltage Systems Part 1 Principles Requirements and Tests |
ETD 19 |
|
14 |
IS 15382 : Part 3 : 2019 |
Insulation Coordination for Equipment within Low-Voltage Systems Part 3 Use of Coating, Potting or Moulding for Protection against Pollution (First Revision) |
ETD 19 |
|
15 |
IS/IEC 60691 : 2015 |
Thermal Links - Requirements and Application Guide (First Revision) |
ETD 39 |
|
16 |
IS/IEC 60695 : Part 2 : Sec 11 : 2021 |
Fire Hazard Testing Part 2: Glowinghot-wire based test methods Section 11: Glow-wire flammability test method for end products GWEPT |
LITD 1 |
|
17 |
IS/IEC 60695 : Part 10 : Sec 2 : 2014 |
Fire hazard testing: Part 10 Abnormal heat: Sec 2 ball pressure test method |
LITD 01 |
|
18 |
IS/IEC 60695 : Part 11 : Sec 5 : 2016 |
Fire Hazard Testing Part 11 Test Flames Section 5 Needle - Flame test method - Apparatus, confirmatory test arrangement and guidance ( First Revision ) |
LITD 1 |
|
19 |
IS/IEC 60695 : Part 11 : Sec 10 : 2013 |
Fire hazard testing: Part 11 test flames :: Sec 10 50 w horizontal and vertical flame test methods |
LITD 01 |
|
20 |
IS 13778 : Part 3 : 2012 |
Winding wires - Test methods: Part 3 mechanical properties (First Revision) |
ETD 33 |
|
21 |
IS 13778 : Part 5 : 2012 |
Winding wires - Test methods: Part 5 electrical properties (First Revision) |
ETD 33 |
|
22 |
IS 1293 : 2019 |
Plugs and Socket-Outlets for Household and Similar Purposes of Rated Voltage up to and Including 250 V and Rated Current up to and Including 16 A - Specification ( Fourth Revision ) |
ETD 14 |
|
23 |
IS/IEC 60947 : PART 1 : 2020 |
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR PART 1 GENERAL RULES |
ETD 7 |
|
24 |
IS/IEC 60947 : Part 5 : Sec 5 : 2016 |
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 5 electrical emergency stop devices with mechanical latching function |
ETD 7 |
|
25 |
IS/IEC 60990 : 2016 |
Methods of Measurement of Touch Current and Protective Conductor Current (First Revision) |
LITD 7 |
|
26 |
IS/IEC 60998 : Part 1 : 2002 |
Connecting Devices for Low-Voltage Circuits for Household and Similar Purposes Part 1 General Requirements |
ETD 14 |
|
27 |
IS 16220 : Part 1 : 2015 |
General purpose lead - Acid batteries (Valve - Regulated Types): Part 1 general requirements, functional characteristics - Methods of test |
ETD 11 |
|
28 |
IS 16220 : Part 2 : 2017 |
General Purpose Lead-Acid Batteries (Valve-Regulated Types) Part 2 Dimensions, Terminals and Marking |
ETD 11 |
|
29 |
IS/IEC 61058 : PART 1 : 2016 |
Switches for appliances: Part 1 general requirements First revision |
ETD 14 |
|
30 |
IS/IEC 61204 : Part 7 : 2016 |
Low-Voltage Power Supplies, d.c. Output Part 7 Safety Requirements |
ETD 31 |
|
31 |
IS 6964 : 2018 |
Electroacoustics - Octave - Band and Fractional Octave Band Filters - Specificaitons (Second Revision) |
LITD 7 |
|
32 |
IS 16463 : Part 11 : 2016 |
Low - Voltage surge protective devices: Part 11 surge protective devices connected to low - Voltage power systems - Requirements and test methods |
ETD 7 |
|
33 |
IS 17064 : Part 1 : 2018 |
Electromechanical elementary relays: Part 1 general and safety requirements |
ETD 35 |
|
34 |
IS 16823 : 2019 |
Secondary cells and batteries containing alkaline or other non - acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries |
ETD 11 |
|
35 |
IS 16501 : 2023 |
Safety of Machinery - Functional Safety of Safety-Related Control Systems ( First Revision ) |
ETD 44 |
|
36 |
IS 16046 : Part 1 : 2018 |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision ) |
ETD 11 |
|
37 |
IS 16046 : Part 2 : 2018 |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision ) |
ETD 11 |
|
38 |
IS 16108 : 2012 |
Photobiological safety of lamps and lamp systems |
ETD 23 |
|
39 |
IS 16894 : Part 2 : 2018 |
Safety requirements for secondary batteries and battery installations: Part 2 stationary batteries |
ETD 11 |
|
40 |
IS 3400 : Part 1 : 2021 |
Methods of Test for Vulcanized Rubber Part 1 Tensile Stress-Strain Properties |
PCD 29 |
|
41 |
IS 13360 : Part 5 : Sec 7 : 2022 |
PLASTICS METHOD OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 7 DETERMINATION OF FLEXURAL PROPERTIES |
PCD 27 |
|
42 |
IS 13360 : Part 5 : Sec 1 : 2021 |
Plastics - Methods of testing: Part 5 Mechanical properties Section 1 Determination of tensile properties - General requirements Second Revision |
PCD 27 |
|
43 |
IS 13360 : Part 5 : Sec 2 : 2017 |
Plastics - Methods of testing: Part 5 mechanical properties section 2 determination of tensile properties - Test conditions for moulding and extrusion plastics (First Revision) |
PCD 27 |
|
44 |
IS 13360 : Part 6 : Sec 21 : 2023 |
PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 21 DETERMINATION OF IGNITION TEMPERATURE USING A HOT-AIR FURNACE |
PCD 27 |
|
45 |
IS 1448 : Part 21 : 2019 |
Methods of test for petroleum and its products [P : 21] determination of flash point - Pensky - Martens closed cup method (Fourth Revision) |
PCD 1 |
|
46 |
IS 16449 : Part 1 : 2018 |
Graphical symbols - Safety colours and safety signs: Part 1 design principles for safety signs and safety markings |
PGD 1 |
|
47 |
IS 16449 : Part 2 : 2021 |
Graphical Symbols - Safety Colours and Safety Signs Part 2 Design Principles for Product Safety Labels |
PGD 1 |
|
48 |
IS 16449 : Part 3 : 2018 |
Graphical Symbols- Safety Colours and Safety Signs Part 3 Design Principles for Graphical Symbols for Use in Safety Signs |
PGD 1 |
|
49 |
IS 16449 : Part 4 : 2017 |
Graphical symbols - Safety colours and safety signs: Part 4 colorimetric and photometric properties of safety sign materials |
PGD 1 |
|
50 |
IS 17863 : Part 1 : 2022 |
Plastics Methods of Exposure to Laboratory Light Sources: Part 1 General Guidance |
PCD 27 |
|
51 |
IS 17863 : Part 2 : 2022 |
Plastics Methods of Exposure to Laboratory Light Sources: Part 2 Xenon-Arc Lamps |
PCD 27 |
|
52 |
IS 17863 : Part 4 : 2022 |
Plastics Methods of Exposure to Laboratory Light Sources: Part 4 Open-Flame Carbon-Arc Lamps |
PCD 27 |
|
53 |
IS 16450 : 2023 |
Graphical Symbols for Use on Equipment Registered Symbols |
PGD 1 |
|
54 |
IS 16451 : 2023 |
Graphical Symbols Safety Colours and Safety Signs Registered Safety Signs |
PGD 1 |
|
55 |
IS 13360 : Part 5 : Sec 27 : 2022 |
Plastics — Methods of Testing Part 5 Mechanical Properties Section 27 Determination of tensile-impact strength |
PCD 27 |
|
56 |
IS 13360 : Part 6 : Sec 23 : 2006 |
Plastics - Methods of testing: Part 6 thermal properties section 23 determination of burning behaviour of thin fiexibie verticai specimens in contact with smaii - Fiame ignition source |
PCD 27 |
