| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 1448 : Part 107 : 1982 |
Methods of test for petroleum and its products [p: 107) precipitation number of lubricating oils |
PCD 1 |
| 2 |
IS 1448 : Part 109 : 2004 |
Methods of test for petroleum and its products [p: 109] petroleum products - Determination of thiol (Mercaptan) sulphur in light and middle distillate fuels - Potentiometric method (First Revision) |
PCD 1 |
| 3 |
IS 15770 : 2008 |
Light diesel oil - Specification |
PCD 3 |
| 4 |
IS 1012 : 2002 |
Turbine lubricating oils - Specification (Third Revision) |
PCD 25 |
| 5 |
IS 14234 : Part 1 : 2002 |
Lubricants for air - Cooled spark - Ignition engines - Specification: Part 1 two - Stroke spark - Ignition engines (First Revision) |
PCD 25 |
| 6 |
IS 11549 : 1986 |
Specification for impregnating oils and compounds for paper insulated cables up to 33 KV |
ETD 3 |
| 7 |
IS 12463 : 1988 |
Inhibited Mineral Insulating Oils |
ETD 3 |
| 8 |
IS 8891 : 1978 |
Specification for pine tar for rubber industry |
PCD 13 |
| 9 |
IS 1866 : 2017 |
Mineral insulating oils in electrical equipment supervision and maintenance guidance (Fourth Revision) |
ETD 3 |
| 10 |
IS 8753 : 1977 |
Code for acceptance tests on stationary steam generators of the power station type |
MED 1 |
| 11 |
IS 13116 : 2006 |
Earth - Moving machinery - Engine test code - Net power (Second Revision) |
MED 7 |
| 12 |
IS 1587 : 2017 |
Aviation turbine fuel, high flash point type - Specification (Fourth Revision) |
PCD 3 |
| 13 |
IS 335 : 2018 |
New insulating oils - Specification (Fifth Revision) |
ETD 3 |
| 14 |
IS 1593 : 2018 |
Fuel oils - Specification (Third Revision) |
PCD 3 |
| 15 |
IS 1745 : 2018 |
Petroleum hydrocarbon solvents - Specification (Third Revision) |
PCD 3 |
| 16 |
IS 1571 : 2018 |
Aviation turbine fuels, kerosine type, jet - A - 1 - Specification (Tenth Revision) |
PCD 3 |
| 17 |
IS 17076 : 2019 |
M15 fuel - Admixture of anhydrous methanol and motor gasoline as fuel for spark ignited engines - Specification |
PCD 3 |
| 18 |
IS 17075 : 2019 |
Anhydrous methanol for use as a blending component in fuels - Specification |
PCD 3 |
| 19 |
IS 17081 : 2019 |
Aviation turbine fuel (Kerosene Type, Jet A - 1) containing synthesized hydrocarbons - Specification |
PCD 3 |
| 20 |
IS 1118 : 2019 |
Gear lubricants, multipurpose (Extreme Pressure Gear Oil) - specification (Second Revision) |
PCD 25 |
| 21 |
IS 13656 : 2019 |
Internal combustion engine crankcase oils for automotive application (Diesel And Gasoline) - Specification (Third Revision) |
PCD 25 |
| 22 |
IS 1448 : Part 22 : 2019 |
Methods of test for petroleum and its products [p : 22] determination of asphaltenes (Heptane Insolubles) in crude petroleum and petroleum products (Third Revision) |
PCD 1 |
| 23 |
IS 17295 : 2019 |
Petroleum Based Low PAH Process and Extender Oils for Rubber and Allied Industries |
PCD 13 |
| 24 |
IS 2796 : 2017 |
Motor gasoline - Specification (Sixth Revision) |
PCD 3 |
| 25 |
IS 1460 : 2017 |
Automotive diesel fuel - Specification (Sixth Revision) |
PCD 3 |
| 26 |
IS 1459 : 2018 |
Kerosene - Specification (Fourth Revision) |
PCD 3 |
| 27 |
IS 17021 : 2018 |
E 20 fuel - Admixture of anhydrous ethanol and gasoline - As fuel for spark ignited engine powered vehicles - Specification |
PCD 3 |
| 28 |
IS 16861 : 2018 |
High flash high speed diesel fuel - Specification |
PCD 3 |
| 29 |
IS 1448 : Part 155 : 2020 |
Methods of Test for Petroleum and its Products [ P : 155 ] Determination of Trace Nitrogen in Liquid Petroleum Hydrocarbons by Oxidative Combustion with Chemiluminescence Detector |
PCD 1 |
| 30 |
IS 1448 : Part 177 : 2020 |
Methods of Test for Petroleum and its Products Part 177 Aviation Fuels — Estimation of Net Specific Energy |
PCD 1 |
| 31 |
IS 1448 : Part 180 : 2020 |
Methods of Test for Petroleum and its Products Part 180 Petroleum Products - Determination of Sulphur Content - Oxidative Microcoulometry Method |
PCD 1 |
| 32 |
IS 9436 : 1980 |
Performance Requirements and Methods of Tests for Wheels for Passenger Cars |
TED 7 |
| 33 |
IS 14740 : Part 1 : 2021 |
Pneumatic Fluid Power - Determination of Flow-Rate Characteristics of Components Using Compressible Fluids Part 1 General Rules and Test Methods for Steady-State Flow ( First Revision ) |
PGD 36 |
| 34 |
IS 15770 : 2008 |
Light Diesel Oil – Specification |
PCD 3 |
| 35 |
IS 16531 : 2016 |
Biodiesel, diesel fuel blend (B6 To B20) - Specification |
PCD 3 |
| 36 |
IS/IEC 61076 : Part 4 : Sec 107 : 2001 |
Connectors for electronic equipment – Part 4-107: Printed board connectors with assessed quality – Detail specification for shielded two-part connectors having a basic grid of 2.0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations |
LITD 3 |
| 37 |
IS/IEC 60794 : Part 2 : Sec 11 : 2020 |
Optical fibre cables Part 2 Indoor cables Section 11 Detailed specification for simplex and duplex cables for use in premises cabling First Revision |
LITD 11 |
| 38 |
IS 14686 : Part 1 : 2021 |
Radio frequency and coaxial cable assemblies Part 1 Generic specification General requirements and test methods Second Revision |
LITD 6 |
| 39 |
IS 14700 : Part 4 : Sec 11 : 2021 |
Electromagnetic compatibility EMC: Part 4 testing and measurement techniques: Sec 11 voltage dips short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
LITD 9 |
| 40 |
IS 14926 : 2021 |
ALPINE SKIS GUIDELINES FOR CONDUCTING SLOPE PERFORMANCE TESTS First Revision |
PGD 27 |
| 41 |
IS/ISO 18250 : Part 7 : 2018 |
Medical devices - Connectors for reservoir delivery systems for healthcare applications - Part 7 Connectors for intravascular infusion |
MHD 14 |
| 42 |
IS 15607 : 2016 |
Biodiesel (B100) - Fatty acid methyl esters (Fame) - Specification (First Revision) |
PCD 3 |
| 43 |
IS 1604 : 2012 |
Aviation gasoline - Specification (Fourth Revision) |
PCD 3 |
| 44 |
IS 5508 : Part 18 : 2021 |
Guide for fishing gear Part 18: 50 m Bulged belly trawl net (first revision) |
TXD 18 |
| 45 |
IS 16899 : 2019 |
Guide for Acceptance and Maintenance of Natural Ester Fluids in Transformers |
ETD 3 |
| 46 |
IS 9269 : 2019 |
Hydraulic fluid power ? filters ? evaluation of differential pressure versus flow characteristics (Second Revision) |
PGD 36 |
| 47 |
IS 1448 : Part 115 : 1984 |
Methods of test for petroleum and its products [p:115] determination of salt content in crude petroleum and its products |
PCD 1 |
| 48 |
IS 11660 : 2022 |
Textile Dyestuffs - Method for Quantitative Estimation of Cationic Dye-Fixing Agents (First Revision) |
TXD 7 |
