| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 15596 : Part 7 : 2016 |
Sound System Equipment Part 7: Headphones and Earphones (First Revision) |
LITD 7 |
| 2 |
IS 16619 : Part 2 : 2018 |
Live working - Voltage detectors: Part 2 resistive type to be used for voltages of 1 kV to 36 kV a.c. |
ETD 36 |
| 3 |
IS 17105 : 2019 |
Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people |
PGD 15 |
| 4 |
IS/IEC 60645 : Part 1 : 2017 |
Electroacoustics - Audiometric Equipment Part 1: Equipment for Pure - Tone and Speech Audiometry |
LITD 7 |
| 5 |
IS 6964 : 2018 |
Electroacoustics - Octave - Band and Fractional Octave Band Filters - Specificaitons (Second Revision) |
LITD 7 |
| 6 |
IS 12552 : 2020 |
Sound and Television Broadcast Receivers and Associated Equipment — Immunity Characteristics — Limits and Methods of Measurement ( Second Revision ) |
LITD 9 |
| 7 |
IS/ISO 19432 : Part 1 : 2020 |
Building Construction Machinery and Equipment - Portable, Hand-Held, Internal Combustion Engine-Driven Abrasive Cutting Machines Part 1 Safety Requirements for Cut-off Machines for Centre-Mounted Rotating Abrasive Wheels ( First Revision ) |
MED 18 |
| 8 |
IS 12444 : 1988 |
Copper Wire Rods for Electrical Applications — Specification ( First Revision ) |
MTD 8 |
| 9 |
IS 517 : 1986 |
Specification for Methanol ( Methyl Alcohol ) ( Third Revision ) |
PCD 9 |
| 10 |
IS 15908 : 2011 |
Selection, installation and maintenance of control and indicating equipments for fire detection and alarm system - Code of practice |
CED 22 |
| 11 |
IS 5894 : 2005 |
Rubber Hose for Sand Blasting |
PCD 13 |
| 12 |
IS 5402 : Part 1 : 2021 |
Microbiology of the food chain - Horizontal method for the enumeration of microorganisms- Part 1: Colony count at 30 C by the pour plate technique |
FAD 31 |
| 13 |
IS 10423 : 1982 |
Specification for personal sound exposure meter |
LITD 7 |
| 14 |
IS 1448 : Part 189 : 2021 |
PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - MICRO METHOD |
PCD 1 |
| 15 |
IS 15575 : Part 2 : 2016 |
Electroacoustics - Sound level meters: Part 2 pattern - Evaluation tests (First Revision) |
LITD 7 |
| 16 |
IS 15059 : 2018 |
Electroacoustics - Sound calibrators (First Revision) |
LITD 7 |
| 17 |
IS 17754 : Part 1 : 2022 |
Agricultural grain driers - Determination of drying performance-Part1:General |
FAD 20 |
| 18 |
IS 17791 : Part 2 : 2022 |
Protective equipment for martial arts: Part 2: Additional requirements and test methods for instep protectors shin protectors and forearm protectors |
PGD 41 |
| 19 |
IS 17791 : Part 4 : 2022 |
Protective equipment for martial arts: Part 4: Additional requirements and test methods for head protectors |
PGD 41 |
| 20 |
IS 582 : Part 9 : 2022 |
METHODS OF CHEMICAL TESTING OF LEATHER Part 9 Determination of pH and difference figure |
CHD 17 |
| 21 |
IS 6100 : 2021 |
SPECIFICATION FOR SODIUM TRIPOLYPHOSPHATE ANHYDROUS TECHNICAL (Second Revision) |
CHD 1 |
| 22 |
IS 1391 : Part 1 : 2017 |
Room air conditioners - Specification: Part 1 unitary air conditioners (Third Revision) |
MED 3 |
| 23 |
IS 1391 : Part 2 : 2018 |
Room air conditioners - Specification: Part 2 split air conditioners (Third Revision) |
MED 3 |
| 24 |
IS 16590 : 2017 |
Water cooled chilling packages using the vapour compression cycle - Specification |
MED 3 |
| 25 |
IS 16619 : Part 1 : 2018 |
Live working - Voltage detectors: Part 1 capacitive type to be used for voltages exceeding 1 kV a.c. |
ETD 36 |
| 26 |
IS 11563 : 2022 |
TECHNICAL SUPPLY CONDITIONS FOR DYNAMIC COMPRESSORS |
MED 22 |
| 27 |
IS/ISO 12097 : Part 3 : 2002 |
ROAD VEHICLES AIRBAG COMPONENTS PART 3: TESTING OF INFLATOR ASSEMBLIES |
TED 29 |
| 28 |
IS 13450 : Part 1 : 2018 |
Medical electrical equipment: Part 1 general requirements for basic safety and essential performance (Second Revision) |
MHD 15 |
| 29 |
IS 13450 : Part 1 : Sec 8 : 2019 |
Medical Electrical Equipment Part 1 General Requirements for Basic Safety and Essential Performance Section 8 Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
MHD 15 |
| 30 |
IS/ISO 10303 : Part 1 : 2021 |
Industrial automation systems and integration -- Product data representation and exchange: Part 1 Overview and fundamental principles |
PGD 18 |
| 31 |
IS/ISO 8528 : PART 10 : 1998 |
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets: Part 10 Measurement of Airborne Noise by the Enveloping Surface Method |
TED 2 |
| 32 |
IS 7080 : Part 3 : 1992 |
MTP suction apparatus specification: Part 3 electrically operated (Second Revision) |
MHD 3 |
| 33 |
IS/ISO 7240 : Part 3 : 2010 |
Fire detection and alarm systems: Part 3 audible alarm devices |
CED 22 |
| 34 |
IS 2026 : Part 10 : 2009 |
Power transformers: Part 10 determination of sound levels |
ETD 16 |
| 35 |
IS 18078 : 2023 |
Implants for surgery - Metal bone plates - Holes corresponding to screws with asymmetrical thread and spherical under-surface |
MHD 2 |
| 36 |
IS/IEC/TR 63091 : 2017 |
Study for the derating curve of surface mount fixed resistors Derating curves based on terminal part temperature |
LITD 5 |
| 37 |
IS/IEC/TR 62059 : Part 11 : 2002 |
Electricity Metering Equipment Dependability : Part 11 General concepts |
ETD 13 |
| 38 |
IS 8000 : Part 3 : 2023 |
Geometrical product specifications (GPS) -- Geometrical tolerancing: Part 3 Profile tolerancing (Third Revision) |
PGD 24 |
| 39 |
IS 13450 : Part 2 : Sec 33 : 2018 |
Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 33 magnetic resonance equipment for medical diagnosis |
MHD 15 |
| 40 |
IS 14130 : 2023 |
Hydraulic Lifting Table - Specification (First Revision) |
MED 7 |
