| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 624 : 2003 |
Bicycles - Rims - Specification (Fourth Revision) |
TED 16 |
| 2 |
IS 801 : 1975 |
Code of practice for use of cold - Formed light gauge steel structural members in general building construction (First Revision) |
CED 7 |
| 3 |
IS 1875 : 1992 |
Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision) |
MTD 4 |
| 4 |
IS 2004 : 1991 |
Carbon steel forgings for general engineering purposes - Specification (Third Revision) |
MTD 16 |
| 5 |
IS 3261 : 1980 |
Specification for carbon steel forgings for shipbuilding industry (First Revision) |
MTD 16 |
| 6 |
IS 3930 : 1994 |
Flame and induction hardening steels - Specification (Second Revision) |
MTD 16 |
| 7 |
IS 4368 : 1967 |
Specification for alloy steel billets, blooms and slabs for forging for general engineering purposes |
MTD 16 |
| 8 |
IS 4431 : 1978 |
Specification for carbon and carbon manganese free cutting steels (First Revision) |
MTD 16 |
| 9 |
IS 5517 : 1993 |
Steels for hardening and tempering - Speicification (Second Revision) |
MTD 16 |
| 10 |
IS 4432 : 1988 |
Specification for case hardening steels (First Revision) |
MTD 16 |
| 11 |
IS 5522 : 2014 |
Stainless steel sheets and strips for utensils - Specification (Third Revision) |
MTD 16 |
| 12 |
IS 3964 : 1980 |
Specifiacation for Light Rails (First Revision) |
CED 7 |
| 13 |
IS 432 : Part 1 : 1982 |
Specification for Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars (Third revision) |
CED 54 |
| 14 |
IS 432 : Part 2 : 1982 |
Specification for Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire (Third Revision) |
CED 54 |
| 15 |
IS 1786 : 2008 |
High Strength Deformed Steel Bars and Wires for Concrete Reinforcement - Specification (Fourth Revision) |
CED 54 |
| 16 |
IS 15660 : 2017 |
Refillable transportable seamless aluminium alloy gas cylinders - Specification (First Revision) |
MED 16 |
| 17 |
IS 15834 (Bi-lingual) : 2008 |
Stainless Steel Sliding Door Bolts for use with Padlocks - Specification |
CED 15 |
| 18 |
IS 3196 : Part 3 : 2012 |
Welded low carbon steel cylinder exceeding 5 litre water capacity for low pressure liquefiable gases: Part 3 methods of test (First Revision) |
MED 16 |
| 19 |
IS 3745 : 2006 |
Yoke type valve connections for small medical gas cylinders - Specification (Second Revision) |
MED 16 |
| 20 |
IS 3443 : 1980 |
SPecification for Crane Rail Sections (First Revision) |
CED 7 |
| 21 |
IS 15490 : 2017 |
Seamless steel cylinders for on - Board storage of compressed natural gas as a fuel for automotive vehicles - Specification (First Revision) |
MED 16 |
| 22 |
IS 13497 : 2017 |
Fusible plug for dissolved acetylene gas cylinder - Specification (First Revision) |
MED 16 |
| 23 |
IS 8737 : 2017 |
Valve fittings for use with liquefied petroleum gas (LPG) cylinders for more than 5 litre water capacity - Specification (Second Revision) |
MED 16 |
| 24 |
IS 7285 : Part 2 : 2017 |
Refillable seamless steel gas cylinders - Specification: Part 2 quenched and tempered steel cylinders with tensile strength less than 1 100 mpa (112 Kgf/mm²) (Fourth Revision) |
MED 16 |
| 25 |
IS 7285 : Part 1 : 2018 |
Refillable seamless steel gas cylinders - Specification: Part 1 normalized steel cylinders (Fourth Revision) |
MED 16 |
| 26 |
IS 15145 : 2002 |
Round kelly for direct rotary water well drilling rig - Requirements |
MED 21 |
| 27 |
IS 14589 : 1999 |
Zinc priming paint, epoxy based, two - Pack - Specification |
CHD 20 |
| 28 |
IS 14946 : 2001 |
Zinc ethyl silicate primer, two components - Specification |
CHD 20 |
| 29 |
IS 10748 : 2004 |
Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision) |
MTD 4 |
| 30 |
IS 13752 : 1993 |
Guidelines for reporting sequence of elements in steel and pig iron and mechanical properties in steels |
MTD 4 |
| 31 |
IS 14491 : 1997 |
Low carbon high strength cold rolled steel sheets and coils for cold forming - Specification |
MTD 4 |
| 32 |
IS 15103 : 2002 |
Fire resistant steel - Specification |
MTD 4 |
| 33 |
IS 15647 : 2006 |
Hot rolled steel narrow width strip for welded tubes and pipes |
MTD 4 |
| 34 |
IS 278 : 2009 |
Galvanized steel barbed wire for fencing - Specification (Fourth Revision) |
MED 10 |
| 35 |
IS 15914 : 2011 |
High tensile strength flat rolled steel plate (Up To 6 Mm), sheet and strip for the manufacture of welded gas cylinder - Specification |
MTD 4 |
| 36 |
IS 15911 : 2010 |
Structural steel (Ordinary Quality) - Specification |
MTD 4 |
| 37 |
IS 15961 : 2012 |
Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain) |
MTD 4 |
| 38 |
IS 15962 : 2012 |
Structural steels for buildings and structures with improved seismic resistance |
MTD 4 |
| 39 |
IS 1990 : 2009 |
Steel rivet and stay bars for boilers (Second Revision) |
MTD 4 |
| 40 |
IS 2062 : 2011 |
Hot rolled medium and high tensile structural steel - Specification (Seventh Revision) |
MTD 4 |
| 41 |
IS 280 : 2006 |
Mild steel wire for general engineering purposes (Fourth Revision) |
MTD 4 |
| 42 |
IS 3502 : 2009 |
Steel chequered plates (Third Revision) |
MTD 4 |
| 43 |
IS 3975 : 1999 |
Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision) |
MTD 4 |
| 44 |
IS 4454 : Part 1 : 2001 |
Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision) |
MTD 4 |
| 45 |
IS 4454 : Part 4 : 2001 |
Steel wires for mechanical springs: Part 4 stainless steel wire (Second Revision) |
MTD 16 |
| 46 |
IS 2825 : 1969 |
Code for unfired pressure vessels |
MED 1 |
| 47 |
IS 6240 : 2008 |
Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision) |
MTD 4 |
| 48 |
IS 7043 : 1973 |
Specification for loom (fly) spindles |
TXD 14 |
| 49 |
IS 7302 : 2018 |
Valve fittings for self contained breathing apparatus (SCBA) and self contained underwater breathing apparatus (SCUBA) - Specification (First Revision) |
MED 16 |
| 50 |
IS 8776 : 1988 |
Specification for valve fittings for use with liquefied petroleum gas (LPG) cylinders up to and including 5 - Litre water capacity (First Revision) |
MED 16 |
| 51 |
IS 14899 : 2014 |
Liquefied petroleum gas (LPG) containers for automotive use - Specification (First Revision) |
MED 16 |
| 52 |
IS 15100 : 2018 |
Multi - Function valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use - Specification (First Revision) |
MED 16 |
| 53 |
SP 7 : Group 1 : 2005 |
National Building Code--Of India 2005 Group 1 |
CED 46 |
| 54 |
IS 4484 : 2013 |
Shipbuilding - Electrically welded stud link anchor chains and connecting shackles and swivels - Specification (Third Revision) |
TED 17 |
| 55 |
IS 4692 : 2013 |
Shipbuilding - Electrically welded studless link anchor chains and connecting shackles - Specification (Second Revision) |
TED 17 |
| 56 |
IS 14329 : 1995 |
Malleable iron castings - Specification |
MTD 6 |
| 57 |
IS 1865 : 1991 |
Iron castings with spheroidal or nodular graphite - Specification (Third Revision) |
MTD 6 |
| 58 |
IS 8329 : 2000 |
Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision) |
MTD 6 |
| 59 |
IS 5789 : 1993 |
Austenitic spheroidal graphite iron castings for pressure containing parts suitable for low - Temperature service - Specification (First Revision) |
MTD 6 |
| 60 |
IS 2090 : 1983 |
Specification for High Tensile Steel Bars Used in Prestressed Concrete (First Revision) |
CED 54 |
| 61 |
IS 6006 : 2014 |
Uncoated Stress Relieved Strand for Prestressed Concrete - Specification (Second Revision) |
CED 54 |
| 62 |
IS 15137 : 2002 |
Metal connecting lugs for porcelain transformer bushings - Specification |
ETD 6 |
| 63 |
IS 11991 : 1986 |
Recommended practice for flash butt welding of tubes, rods and other sections in carbon and alloy steels |
MTD 11 |
| 64 |
IS 15769 : 2008 |
Flux cored (Tubular) electrodes for gas shielded and self - Shielded metal welding of carbon or carbon - Manganese steel |
MTD 11 |
| 65 |
IS 822 : 1970 |
Code of procedure for inspection of welds |
MTD 11 |
| 66 |
IS 6419 : 1996 |
Welding rods and bare electrodes for gas shielded arc welding of structural steel - Specification (First Revision) |
MTD 11 |
| 67 |
IS 7902 : 2001 |
Aluminium alloy forging stock and forgings (Alloy 24345) for aerospace applications - Specification (First Revision) |
MTD 7 |
| 68 |
IS 14712 : 1999 |
Wrought aluminium and its alloys - Chequered/tread sheets for general engineering purposes - Specification |
MTD 7 |
| 69 |
IS 7670 : 2002 |
Aluminium alloy forging stock and forgings (for parts operated at elevated temperatures) for aerospace applications (Alloy 22588) - specification (First Revision) |
MTD 7 |
| 70 |
IS 10569 : 2005 |
Aluminium bronze rods, bars and sections - Specification (First Revision) |
MTD 8 |
| 71 |
IS 7814 : 2005 |
Phosphor bronze sheet, strip and foil - Specification (Second Revision) |
MTD 8 |
| 72 |
IS 8328 : 2007 |
Free cutting copper bars, rods and sections - Specification (First Revision) |
MTD 8 |
| 73 |
IS 613 : 2000 |
Copper rods and bars for electrical purposes - Specification (Third Revision) |
MTD 8 |
| 74 |
IS 6912 : 2005 |
Copper and copper alloys forging stock and forging - Specification (Second Revision) |
MTD 8 |
| 75 |
IS 1458 : 1965 |
Railway Bronze Ingots And Casting (First Revision) |
MTD 8 |
| 76 |
IS 14810 : 2000 |
Copper tubes for plumbing - Specification |
MTD 8 |
| 77 |
IS 14811 : 2000 |
Rolled copper plate, sheet, strip and foils for general engineering purposes - Specification |
MTD 8 |
| 78 |
IS 1897 : 2008 |
Copper strip for electrical purposes - Specification (Third Revision) |
MTD 8 |
| 79 |
IS 2283 : 2000 |
Nickel silver sheet, strip and foil - Specification (Second Revision) |
MTD 8 |
| 80 |
IS 3091 : 1999 |
Aluminium bronze ingots and castings for overhead fittings in electric traction - Specification (First Revision) |
MTD 8 |
| 81 |
IS 319 : 2007 |
Free cutting brass bars, rods and section - Specification (Fifth Revision) |
MTD 8 |
| 82 |
IS 1161 : 2014 |
Steel tubes for structural purposes - Specification (Fifth Revision) |
MTD 19 |
| 83 |
IS B3601 : 2006 |
Steel Tubes for Mechanical and General Engineering Purposes (Bi-lingual) |
MTD 19 |
| 84 |
IS 1239 : Part 1 : 2004 |
Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision) |
MTD 19 |
| 85 |
IS 1239 : Part 2 : 2011 |
Steel tubes, tubulars and other steel fittings - Specification: Part 2 steel pipe fittings (Fifth Revision) |
MTD 19 |
| 86 |
IS 3074 : 2013 |
Steel tubes for automotive purposes - Specification (Third Revision) |
MTD 19 |
| 87 |
IS 3589 : 2001 |
Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision) |
MTD 19 |
| 88 |
IS 3601 : 2006 |
Steel tubes for mechanical and general engineering purposes - Specification (Second Revision) |
MTD 19 |
| 89 |
IS 4270 : 2001 |
Steel tubes used for water wells specification (Third Revision) |
MTD 19 |
| 90 |
IS 4923 : 2017 |
Hollow steel sections for structural use - Specification (Third Revision) |
MTD 19 |
| 91 |
IS 7806 : 1993 |
Martensitic steel and austenitic high alloy steel castings for high temperature corrosion services - Specification (Second Revision) |
MTD 14 |
| 92 |
IS 7899 : 2006 |
Alloy steel castings suitable for pressure service - Specification (Third Revision) |
MTD 14 |
| 93 |
IS 1030 : 1998 |
Carbon steel castings for general engineering purposes - Specification (Fifth Revision) |
MTD 14 |
| 94 |
IS 10343 : 1999 |
Carbon and low alloy steel investment castings for general applications - Specification (Second Revision) |
MTD 14 |
| 95 |
IS 11709 : 2007 |
Technical delivery conditions for investment castings of steel (Second Revision) |
MTD 14 |
| 96 |
IS 11758 : 1994 |
Precipitation hardening stainless steel castings - Specification (First Revision) |
MTD 14 |
| 97 |
IS 12968 : 1991 |
Steel castings for crankshafts for marine engines - Specification |
MTD 14 |
| 98 |
IS 13505 : 1992 |
Centrifugally cast high alloy steel and nickel base tubing for pressure application at high temperature - Specification |
MTD 14 |
| 99 |
IS 4491 : 1994 |
Steel castings of high magnetic permeability - Specification (Third Revision) |
MTD 14 |
| 100 |
IS 4896 : 1992 |
One percent chromium steel castings for resistance to abrasion - Specification (Second Revision) |
MTD 14 |
| 101 |
IS 276 : 2000 |
Austenitic - Manganese steel castings - Specification (First Revision) |
MTD 14 |
| 102 |
IS 2856 : 1999 |
Carbon steel castings for pressure containing parts suitable for fusion welding - Specification (Fourth Revision) |
MTD 14 |
| 103 |
IS 3444 : 1999 |
Corrosion resistant high alloy steel and nickel base castings for general applications - Specification (Third Revision) |
MTD 14 |
| 104 |
IS 3038 : 2006 |
Martensitic stainless steel and alloy steel castings for pressure containing parts suitable for high temperature service - Specification (Fourth Revision) |
MTD 14 |
| 105 |
IS 2986 : 1990 |
Steel castings for marine engines and boilers - Specifcication (Second Revision) |
MTD 14 |
| 106 |
IS 2644 : 1994 |
High strength steel castings for general engineering and structural purposes - Specification (Fourth Revision) |
MTD 14 |
| 107 |
IS 2707 : 1996 |
Carbon steel castings for surface hardening - Specification (Fourth Revision) |
MTD 14 |
| 108 |
IS 2708 : 1993 |
1.5 percent manganese steel castings for general engineering purposes - Specification (Third Revision) |
MTD 14 |
| 109 |
IS 13352 : 1992 |
Stock for forgings produced from continuously cast blooms, billets and slabs - Specification |
MTD 16 |
| 110 |
IS 14652 : 1999 |
18 percent nickel maraging steel bars and rods - Specification |
MTD 16 |
| 111 |
IS 14698 : 1999 |
Carbon and low alloy steel billets, blooms, slabs and bars for manufacture of shell bodies and proof shots used in defence services - Specification |
MTD 16 |
| 112 |
IS 6527 : 1995 |
Stainless steel wire rods - Specification (First Revision) |
MTD 16 |
| 113 |
IS 6528 : 1995 |
Stainless steel wire - Specification (First Revision) |
MTD 16 |
| 114 |
IS 6911 : 2017 |
Stainless steel plate, sheet and strip - Specification (Second Revision) |
MTD 16 |
| 115 |
IS 9175 : Part 10 : 1985 |
Specification for rationalized steels for automobile and ancillary industry, mechanical and physical properties: Part 10 14c14s14 grade steel |
MTD 16 |
| 116 |
IS 9175 : Part 17 : 1987 |
Specification for rationalized steels for the automobile and ancillary industry: Part 17 mechanical and physical properties of 35mn6mo4 grade steel |
MTD 16 |
| 117 |
IS 9175 : Part 20 : 1986 |
Rationalized steels for the automobile and ancillary industry: Part 20 mechanical and physical properties of 20mnCr5 grade steel |
MTD 16 |
| 118 |
IS 15997 : 2012 |
Low nickel austenitic stainless steel plate, sheet, and strip for utensils and kitchen appliances - Specification |
MTD 16 |
| 119 |
IS 4367 : 1991 |
Alloy steel forgings for general industrial use - Specification (First Revision) |
MTD 16 |
| 120 |
IS 1180 : Part 1 : 2014 |
Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision) |
ETD 16 |
| 121 |
IS 13917 : 2003 |
Stranded wire ropes for mine hoisting - Technical delivery requirements (First Revision) |
MED 10 |
| 122 |
IS 14228 : 1996 |
Implants for surgery - Staples with parallel legs for orthopaedic use - General requirements |
MHD 2 |
| 123 |
IS 5347 : Part 12 : 1993 |
Requirements for orthopaedic implants Part 12 Wrought cobalt-nickel-chromium molybdenum tungsten iron alloy |
MHD 2 |
| 124 |
IS 5347 : Part 13 : 1997 |
Requirements for orthopaedic implants Part 13 Wrought high nitrogen stainless steel |
MHD 2 |
| 125 |
IS 5347 : Part 14 : 1997 |
Requirements for orthopaedic implants Part 14 Wrought titanium 5-aluminium 2,5-iron alloy |
MHD 2 |
| 126 |
IS 5347 : Part 15 : 1997 |
Requirements for orthopaedic implants Part 15 Wrought titanium 6-aluminium 7-niobium alloy |
MHD 2 |
| 127 |
IS 5347 : Part 17 : 2002 |
Requirements for orthopedic implants Part 17 metallic materials - Unalloyed tantalum for surgical implant applications |
MHD 2 |
| 128 |
IS 5347 : Part 2 : 1993 |
Requirements for orthopaedic Implants Part 2 Wrought stainless steel |
MHD 2 |
| 129 |
IS 5347 : Part 3 : 1996 |
Requirements for orthopaedic implants Part 3 Unalloyed titanium |
MHD 2 |
| 130 |
IS 5347 : Part 4 : 1996 |
Requirements for orthopaedic implants Part 4 Wrought titanium 6-aluminium 4- vanadium alloy |
MHD 2 |
| 131 |
IS 5347 : Part 5 : 2000 |
Requirements for Orthopaedic Implants - Part 5 : Cobalt-chromium-molybdenum Casting Alloy |
MHD 2 |
| 132 |
IS 810 : 1991 |
Internal combustion engines - Engine valves - Specification (Second Revision) |
TED 2 |
| 133 |
IS 8886 : Part 2 : 1978 |
Ship's Ordinary Rectangular Windows - Part II : General Requirements |
TED 17 |
| 134 |
IS 16651 : 2017 |
High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement - Specification |
CED 54 |
| 135 |
IS 1367 : Part 3 : 2017 |
Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision) |
PGD 37 |
| 136 |
IS 16644 : 2018 |
Stress - Relieved, Low Relaxation Steel Wire for Prestressed Concrete - Specification |
CED 54 |
| 137 |
IS 16988 : 2018 |
Compressed natural gas cylinder valve integrated with solenoid operation (Remotely Controlled) for automotive use - Specification |
MED 16 |
| 138 |
IS 6594 : 2018 |
Technical supply conditions for steel wire ropes and strands (Third Revision) |
MED 10 |
| 139 |
IS 7811 : 2019 |
Phosphor bronze rods and bars (Second Revision) |
MTD 8 |
| 140 |
IS 513 : Part 1 : 2016 |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
MTD 4 |
| 141 |
IS 513 : Part 2 : 2016 |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
MTD 4 |
| 142 |
IS 5986 : 2017 |
Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision) |
MTD 4 |
| 143 |
IS 1079 : 2017 |
Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision) |
MTD 4 |
| 144 |
IS 7904 : 2018 |
High carbon steel wire rods - Specification (Second Revision) |
MTD 4 |
| 145 |
IS 7903 : 2011 |
Textiles - Tarpaulines Made From High Density Polyethylene Woven Fabric |
TXD 23 |
| 146 |
IS 2749 : 1974 |
Specification for austenitic iron castings (First Revision) |
MTD 6 |
| 147 |
IS 5082 : 1998 |
Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications (Second Revision) |
MTD 7 |
