| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 2825 : 1969 |
Code for unfired pressure vessels |
MED 1 |
| 2 |
IS/ISO 3449 : 2005 |
Earth - Moving machinery - Falling - Opject protective structures - Laboratory tests and performance requirements |
MED 7 |
| 3 |
IS/ISO3471 : 2008 |
Earth-Moving Machinery - Roll-Over Protective Structures-Laboratory Tests and Performance Requirements |
MED 7 |
| 4 |
IS 4484 : 2013 |
Shipbuilding - Electrically welded stud link anchor chains and connecting shackles and swivels - Specification (Third Revision) |
TED 17 |
| 5 |
IS 14329 : 1995 |
Malleable iron castings - Specification |
MTD 6 |
| 6 |
IS 1865 : 1991 |
Iron castings with spheroidal or nodular graphite - Specification (Third Revision) |
MTD 6 |
| 7 |
IS 5789 : 1993 |
Austenitic spheroidal graphite iron castings for pressure containing parts suitable for low - Temperature service - Specification (First Revision) |
MTD 6 |
| 8 |
IS 15769 : 2008 |
Flux cored (Tubular) electrodes for gas shielded and self - Shielded metal welding of carbon or carbon - Manganese steel |
MTD 11 |
| 9 |
IS 6419 : 1996 |
Welding rods and bare electrodes for gas shielded arc welding of structural steel - Specification (First Revision) |
MTD 11 |
| 10 |
IS 12620 : 1989 |
Seamless steel tubes for manufacturing high pressure gas cylinders - Specification |
MTD 19 |
| 11 |
IS 7899 : 2006 |
Alloy steel castings suitable for pressure service - Specification (Third Revision) |
MTD 14 |
| 12 |
IS 12968 : 1991 |
Steel castings for crankshafts for marine engines - Specification |
MTD 14 |
| 13 |
IS 4899 : 2006 |
Ferritic and martensitic steel castings for use at low temperature - Specification (Third Revision) |
MTD 14 |
| 14 |
IS 276 : 2000 |
Austenitic - Manganese steel castings - Specification (First Revision) |
MTD 14 |
| 15 |
IS 2856 : 1999 |
Carbon steel castings for pressure containing parts suitable for fusion welding - Specification (Fourth Revision) |
MTD 14 |
| 16 |
IS 3038 : 2006 |
Martensitic stainless steel and alloy steel castings for pressure containing parts suitable for high temperature service - Specification (Fourth Revision) |
MTD 14 |
| 17 |
IS 2986 : 1990 |
Steel castings for marine engines and boilers - Specifcication (Second Revision) |
MTD 14 |
| 18 |
IS 2985 : 1990 |
Steel Castings for Ship's Structure |
MTD 14 |
| 19 |
IS 2644 : 1994 |
High strength steel castings for general engineering and structural purposes - Specification (Fourth Revision) |
MTD 14 |
| 20 |
IS 2708 : 1993 |
1.5 percent manganese steel castings for general engineering purposes - Specification (Third Revision) |
MTD 14 |
| 21 |
IS 14698 : 1999 |
Carbon and low alloy steel billets, blooms, slabs and bars for manufacture of shell bodies and proof shots used in defence services - Specification |
MTD 16 |
| 22 |
IS 16651 : 2017 |
High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement - Specification |
CED 54 |
| 23 |
IS 16772 : 2018 |
Round steel short link chains for lifting purposes - Fine tolerance hoist chains for hand operated chain hoists - Grade vh |
MED 14 |
| 24 |
IS 16773 : 2018 |
Round steel short link chains for lifting purposes - Fine tolerance hoist chains for hand operated chain hoists - Grade th |
MED 14 |
| 25 |
IS/ISO 3076 : 2012 |
Round steel short link chains for general lifting purposes - Medium tolerance sling chains for chain slings - Grade 8 (First Revision) |
MED 14 |
| 26 |
IS 6876 : 2019 |
Fork - Lift trucks - Fork arms - Technical characteristics and testing (Second Revision) |
TED 22 |
| 27 |
IS 5986 : 2017 |
Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision) |
MTD 4 |
| 28 |
IS 17417 : Part 2 : 2020 |
Metallic Materials - Dynamic Force Calibration for Uniaxial Fatigue Testing Part 2 Dynamic Calibration Device ( DCD ) Instrumentation |
MTD 3 |
| 29 |
IS 15935 : 2011 |
Composite cylinders for on - Board storage of compressed natural gas (CNG) as a fuel for automotive vehicle - Specification |
MED 16 |
| 30 |
IS 9683 : 1980 |
Specification for carbon and low alloy steel forgings for fired and unfired pressure vessels |
MTD 16 |
| 31 |
IS 1757 : Part 2 : 2020 |
Metallic Materials - Charpy Pendulum Impact Test Part 2 Verification of Testing Machines ( Fourth Revision ) |
MTD 3 |
| 32 |
IS 1757 : Part 3 : 2020 |
Metallic Materials - Charpy Pendulum Impact Test Part 3 Preparation and Characterization of Charpy V-notch Test Pieces for Indirect Verification of Pendulum Impact Machines ( Fourth Revision ) |
MTD 3 |
| 33 |
IS 8800 : 1997 |
Technical delivery conditions for steel castings (Excluding Investment Castings) (Third Revision) |
MTD 14 |
| 34 |
IS 17631 : 2022 |
Work Chairs - Specification |
CED 35 |
| 35 |
IS 13360 : Part 4 : Sec 1 : SubSec 2 : 2018 |
Plastics - Methods of Testing - Part 4 : Rheological Properties - Section 1 : Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics |
PCD 27 |
| 36 |
IS 17902 : 2022 |
Animal feeding stuffs Determination of amylase-treated neutral detergent fibre content ANDF |
FAD 5 |
| 37 |
IS 3039 : 1988 |
Specification for structural steel for construction of hulls of ships (Second Revision) |
MTD 4 |
| 38 |
IS 6603 : 2001 |
Stainless steel bars and flats - Specification (First Revision) |
MTD 16 |
