| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 803 : 1976 |
Code of Practice for Design, Fabrication and Erection of Vertical Mild Steel Cylindrical Welded Oil Storage Tanks (First Revision) |
CED 7 |
| 2 |
IS 3196 : Part 1 : 2013 |
Welded low carbon steel cylinders exceeding 5 litres water capacity for low pressure liquefiable gases: Part 1 cylinders for liquefied petroleum gases (Lpg) - Specification (Sixth Revision) |
MED 16 |
| 3 |
IS 3196 : Part 2 : 2006 |
Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases: Part 2 cylinders for liquefiable non - Toxic gases other than lpg - Specification (First Revision) |
MED 16 |
| 4 |
IS 3196 : Part 4 : 2001 |
Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases - Specification: Part 4 cylinders for toxic and corrosive gases |
MED 16 |
| 5 |
IS 10096 :Part 1 : Sec 2 : 2014 |
Recommendations for inspection, testing and maintenance of radial gates and rope drum hoists: Part 1 inspection, testing and assembly at the manufacturing stage: Sec 2 rope drum hoists (First Revision) |
WRD 12 |
| 6 |
IS 15637 : 2006 |
Welded stainless steel cylinders for liquefied petroleum gases (LPG) from 0.5 litre to 250 litre water capacity - Specification |
MED 16 |
| 7 |
IS 2825 : 1969 |
Code for unfired pressure vessels |
MED 1 |
| 8 |
IS 14899 : 2014 |
Liquefied petroleum gas (LPG) containers for automotive use - Specification (First Revision) |
MED 16 |
| 9 |
IS 15661 : 2006 |
Petroleum, chemical and gas service industries - Centrifugal compressors |
MED 22 |
| 10 |
IS 14419 : 1996 |
Acceptance standards for radiographic examination of welds for ships - Recommendations |
MTD 11 |
| 11 |
IS 822 : 1970 |
Code of procedure for inspection of welds |
MTD 11 |
| 12 |
IS 3091 : 1999 |
Aluminium bronze ingots and castings for overhead fittings in electric traction - Specification (First Revision) |
MTD 8 |
| 13 |
IS 8780 : 2004 |
Non - Destructive testing of steel castings - Code of practice (First Revision) |
MTD 21 |
| 14 |
IS 7810 : 1999 |
Code of practice for radiographic examination of resistance spot welds on aluminium and its alloys (First Revision) |
MTD 21 |
| 15 |
IS 7806 : 1993 |
Martensitic steel and austenitic high alloy steel castings for high temperature corrosion services - Specification (Second Revision) |
MTD 14 |
| 16 |
IS 7899 : 2006 |
Alloy steel castings suitable for pressure service - Specification (Third Revision) |
MTD 14 |
| 17 |
IS 1030 : 1998 |
Carbon steel castings for general engineering purposes - Specification (Fifth Revision) |
MTD 14 |
| 18 |
IS 10343 : 1999 |
Carbon and low alloy steel investment castings for general applications - Specification (Second Revision) |
MTD 14 |
| 19 |
IS 11709 : 2007 |
Technical delivery conditions for investment castings of steel (Second Revision) |
MTD 14 |
| 20 |
IS 11758 : 1994 |
Precipitation hardening stainless steel castings - Specification (First Revision) |
MTD 14 |
| 21 |
IS 4475 : Part 3 : 1989 |
Foundry - Crane suspended ladlesspecification: Part 3 straight/taper sided ladles 0.25 to 3.0 tonnes for S. G. iron foundries (Second Revision) |
MTD 14 |
| 22 |
IS 12968 : 1991 |
Steel castings for crankshafts for marine engines - Specification |
MTD 14 |
| 23 |
IS 13505 : 1992 |
Centrifugally cast high alloy steel and nickel base tubing for pressure application at high temperature - Specification |
MTD 14 |
| 24 |
IS 4491 : 1994 |
Steel castings of high magnetic permeability - Specification (Third Revision) |
MTD 14 |
| 25 |
IS 4896 : 1992 |
One percent chromium steel castings for resistance to abrasion - Specification (Second Revision) |
MTD 14 |
| 26 |
IS 4899 : 2006 |
Ferritic and martensitic steel castings for use at low temperature - Specification (Third Revision) |
MTD 14 |
| 27 |
IS 276 : 2000 |
Austenitic - Manganese steel castings - Specification (First Revision) |
MTD 14 |
| 28 |
IS 2856 : 1999 |
Carbon steel castings for pressure containing parts suitable for fusion welding - Specification (Fourth Revision) |
MTD 14 |
| 29 |
IS 3444 : 1999 |
Corrosion resistant high alloy steel and nickel base castings for general applications - Specification (Third Revision) |
MTD 14 |
| 30 |
IS 3038 : 2006 |
Martensitic stainless steel and alloy steel castings for pressure containing parts suitable for high temperature service - Specification (Fourth Revision) |
MTD 14 |
| 31 |
IS 2986 : 1990 |
Steel castings for marine engines and boilers - Specifcication (Second Revision) |
MTD 14 |
| 32 |
IS 2985 : 1990 |
Steel Castings for Ship's Structure |
MTD 14 |
| 33 |
IS 2644 : 1994 |
High strength steel castings for general engineering and structural purposes - Specification (Fourth Revision) |
MTD 14 |
| 34 |
IS 2707 : 1996 |
Carbon steel castings for surface hardening - Specification (Fourth Revision) |
MTD 14 |
| 35 |
IS 2708 : 1993 |
1.5 percent manganese steel castings for general engineering purposes - Specification (Third Revision) |
MTD 14 |
| 36 |
IS 13673 : Part 2 : 2021 |
Expression of Performance of Electrochemical Analyzers Part 2 pH Value ( First Revision ) |
ETD 18 |
| 37 |
IS 8800 : 1997 |
Technical delivery conditions for steel castings (Excluding Investment Castings) (Third Revision) |
MTD 14 |
| 38 |
IS 12117 : 1996 |
Norms for classification of steel foundries for quality assurance (First Revision) |
MTD 14 |
| 39 |
IS 9550 : 2001 |
Bright steel bars - Specification (First Revision) |
MTD 4 |
| 40 |
IS 5139 : 1995 |
Repair of cast iron castings by Oxy - Acetylene and manual metal arc welding - Recommendations (First Revision) |
MTD 11 |
