| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 8090 : 1976 |
Specification for couplings, branch pipe, nozzle used in hose reel tubing for fire fighting |
CED 22 |
| 2 |
IS 778 : 1984 |
Specification for copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision) |
CED 3 |
| 3 |
IS 779 : 1994 |
Water meters (Domestic Type) - Specification (Sixth Revision) |
CED 3 |
| 4 |
IS 781 : 1984 |
Specification for cast copper alloy screw down bib taps and stop valves for water services (Third Revision) |
CED 3 |
| 5 |
IS 1701 : 1960 |
Specification for mixing valves for ablutionary and doimestic purposes |
CED 3 |
| 6 |
IS 1703 : 2000 |
Water fittings - copper alloy float valves (horizontal plunger type) - Specification (fourth revision) |
CED 3 |
| 7 |
IS 1711 : 1984 |
Specification for self - Closing taps for water supply purposes (second revision) |
CED 3 |
| 8 |
IS 950 : 2012 |
Functional requirements for water tender, type B for fire brigade use (Third Revision) |
CED 22 |
| 9 |
IS 6067 : 1983 |
Functional Requirements for Water Tender Type `X' for Fire Brigade Use |
CED 22 |
| 10 |
IS 15528 : 2004 |
Gaseous fire extinguishing systems - Carbon dioxide total flooding and local application (Sub - Floor And In - Cabinet), high and low pressure (Refrigerated) systems |
CED 22 |
| 11 |
IS 8924 : 1978 |
Specification for bushes for leaf spring assemblies for automotive suspension |
TED 34 |
| 12 |
IS 1019 : 1974 |
Specification for rim latches (Second Revision) |
CED 15 |
| 13 |
IS 7208 : 1992 |
Flocculator devices guideltnes (First Revision) |
CED 24 |
| 14 |
IS 6280 : 1971 |
Specification for sewage screens |
CED 24 |
| 15 |
IS 4622 : 2020 |
Recommendations for Structural Design of Fixed-Wheel Gates ( Fourth Revision ) |
WRD 12 |
| 16 |
IS 7332 : Part 1 : 1991 |
Spherical valves for hydropower stations and systems: Part 1 criteria for structural and hydraulic design (Fl"rsl Revision) |
WRD 12 |
| 17 |
IS 10096 :Part 1 : Sec 2 : 2014 |
Recommendations for inspection, testing and maintenance of radial gates and rope drum hoists: Part 1 inspection, testing and assembly at the manufacturing stage: Sec 2 rope drum hoists (First Revision) |
WRD 12 |
| 18 |
IS 10210 : 1993 |
CrlTeria for design of hydraulic hoists for gates (First Revision) |
WRD 12 |
| 19 |
IS 4623 : 2000 |
Recommendations for structural design of radial gates (Third Revision) |
WRD 12 |
| 20 |
IS 7326 : Part 1 : 1992 |
Penstock and turbine inlet butterfly valves for hydropower stations and systems: Part 1 criteria for structural and hydraulic design (First Revision) |
WRD 12 |
| 21 |
IS 944 : 1979 |
Functional requirements of 1800-1/min trailer pump for fire brigade use |
CED 22 |
| 22 |
IS 11617 : 1986 |
Specification for regulating type liquid flow indicators |
PGD 19 |
| 23 |
IS 11618 : 1986 |
Specification for non - Regulating type liquid flow indicators |
PGD 19 |
| 24 |
IS 7090 : 1985 |
Guidelines for rapid mixing devices (First Revision) |
CED 24 |
| 25 |
IS 13349 : 1992 |
Cast iron single faced thimble mounted sluice gates - Specification |
CED 3 |
| 26 |
IS 14845 : 2000 |
Resilient seated cast iron air relief valves for water works purposes - Specification |
CED 3 |
| 27 |
IS 14846 : 2000 |
Sluice valve for water works purposes (50 To 1200 mm size) - Specification |
CED 3 |
| 28 |
IS 1795 : 1982 |
Specification for pillar taps for water supply purposes (second revision) |
CED 3 |
| 29 |
IS 2373 : 1981 |
Specification for water meters (bulk type) (third revision) |
CED 3 |
| 30 |
IS 2692 : 1989 |
Ferrules for water services - specification (second revision) |
CED 3 |
| 31 |
IS 3004 : 1979 |
Specification for plug cocks for water supply purposes (first revision) |
CED 3 |
| 32 |
IS 4038 : 1986 |
Specification for foot valves for water works purposes (second revision) |
CED 3 |
| 33 |
IS 5312 : Part 1 : 2004 |
Swing check type reflux (non-return) valves for water works purposes - Specification: Part 1 Single door pattern (second revision) |
CED 3 |
| 34 |
IS 5312 : Part 2 : 2013 |
Swing Check Type Reflux (Non-Return) Valves for Water Works Purpose - Specification Part 2 : Multi-Door Pattern |
CED 3 |
| 35 |
IS 9338 : 2013 |
Cast iron/S.G. Iron/Cast Steel screw-down stop valves for water works purposes - Specification (second revision) |
CED 3 |
| 36 |
IS 9739 : 1981 |
Specification for pressure reducing valves for domestic water supply systems |
CED 3 |
| 37 |
IS 11335 : 1995 |
Shipbuilding - Cast iron gate valves for use in marine pipework system - Specification (First Revision) |
TED 17 |
| 38 |
IS 14220 : 2018 |
Openwell submersible pumpsets - Specification (First Revision) |
MED 20 |
| 39 |
IS 12699 : 1989 |
Selection, installation, operation and maintenance of jet centrifugal pump combination - Code of practice |
MED 20 |
| 40 |
IS 12225 : 1997 |
Centrifugal jet pump - Specification (First Revision) |
MED 20 |
| 41 |
IS 3847 : 1992 |
Mortice Night Latches-specification |
MED 33 |
| 42 |
IS 8418 : 1999 |
Pumps - Centrifugal self priming - Specification (First Revision) |
MED 20 |
| 43 |
IS 6595 : Part 2 : 1993 |
Horizontal centrifugal pumps for clear, cOld water: Part 2 general pmUrpose (Other than agricultural and rural water supply) - Specification (Second Revision) |
MED 20 |
| 44 |
IS 5600 : 2002 |
Pumps - Sewage and drainage - Specification (First Revision) |
MED 20 |
| 45 |
IS 10962 : 1984 |
Technical Supply Conditions For Reciprocating Air Compressor Above 60 Kw |
MED 22 |
| 46 |
IS 13404 : 2012 |
Power trowel - General requirements (First Revision) |
MED 18 |
| 47 |
IS 10074 : 1982 |
Specification for compaction mould assembly for light and heavy compaction test for soils |
CED 43 |
| 48 |
IS 4503 : 1967 |
Specification for shell and tube type heat exchangers |
MED 1 |
| 49 |
IS 2825 : 1969 |
Code for unfired pressure vessels |
MED 1 |
| 50 |
IS 10837 : 1984 |
Moulds And Accessories For Determination Of Density Index (relative Density) Of Cohesionless Soils |
CED 43 |
| 51 |
IS 12175 : 1987 |
Specification for rapid moisture meter for rapid determination of water content for soil |
CED 43 |
| 52 |
IS 11209 : 1985 |
Specification for mould assembly for determination of permeability of soils |
CED 43 |
| 53 |
IS 9669 : 1980 |
Specification for cbr moulds and its accessories |
CED 43 |
| 54 |
IS 6596 : 1972 |
Specification for pumps for handling paper stock |
MED 20 |
| 55 |
IS 9542 : 1980 |
Specification for horizontal centrifugal monoset pumps for clear, cold, fresh water |
MED 20 |
| 56 |
IS 5930 : 1970 |
Specification for mortice latch (Vertical Type) |
MED 33 |
| 57 |
SP 57 (QAWSM) : 1993 |
Handbook on pipes and fittings for drinking water supply |
CED 50 |
| 58 |
IS 9682 : 1980 |
Recommended procedure for inspection of cast copper tuyeres |
MTD 8 |
| 59 |
IS 9283 : 2013 |
Motors for submersible pumpsets - Specification (Second Revision) |
ETD 15 |
| 60 |
IS H12266 : 1987 |
international shore connection for use on board ship (HINDI) |
TED 19 |
| 61 |
IS 12266 : 1987 |
Specification for international shore connections for use on board ship |
TED 19 |
| 62 |
IS 12266 : 1987 |
international shore connection for use on board ship |
TED 19 |
| 63 |
IS 8150 : 1997 |
Shipbuilding - 45 Litre Capacity Chemical Foam Type Fire Engine, for Marine Use |
TED 19 |
| 64 |
IS 11294 : Part 1 : 1985 |
Specification for side scuttles for inland vessels: Part 1 general requirements |
TED 18 |
| 65 |
IS 13804 : 1993 |
Inland vessels - Sheaves for dredgers - Dimensions |
TED 18 |
| 66 |
IS 1973 : 1999 |
Sugarcane Crushers - Specification (Third Revision) |
FAD 20 |
| 67 |
IS 16045 : 2013 |
Copper alloy screw - Down stop valves and stop and check valves for marine application - Specification |
TED 17 |
| 68 |
IS 15998 : 2013 |
Cast iron, spheroidal/nodular cast iron and cast steel screw - Down stop valves and stop and check valves for marine applications - Specification |
TED 17 |
| 69 |
IS 6143 : 1971 |
Specification for sheaves used with ships blocks |
TED 17 |
| 70 |
IS 3829 : Part 1 : 1999 |
Specification for steam sterilizers: Part 1 horizontal cylindrical and horizontal rectangular steam sterilizers, pressure type (For Hospital And Pharmaceutical Use) (Second Revision) |
MHD 12 |
| 71 |
IS 9079 : 2018 |
Monoset pumps for clear, cold water for agricultural and water supply purposes - Specification (Third Revision) |
MED 20 |
| 72 |
IS 8034 : 2018 |
Submersible pumpsets - Specification (Third Revision) |
MED 20 |
| 73 |
IS 6595 : Part 1 : 2018 |
Horizontal centrifugal pumps for clear, cold water - Specification: Part 1 agricultural and rural water supply purposes (Fourth Revision) |
MED 20 |
| 74 |
IS 8472 : 2019 |
Centrifugal regenerative pumps for clear, cold water - Specification (Second Revision) |
MED 20 |
| 75 |
IS 1710 : 2021 |
Vertical Turbine Pumps - Specification ( Third Revision ) |
MED 20 |
| 76 |
IS 9131 : 1979 |
Specification for rim locks |
MED 33 |
| 77 |
IS 884 : 1985 |
Specification for first - Aid hose - Reel for fire fighting (First Revision) |
CED 22 |
| 78 |
IS 904 : 1983 |
Specification for 2 - Way and 4 - Way suction collecting heads for fire fighting purposes |
CED 22 |
| 79 |
IS 907 : 1984 |
Specification for suction strainers, cylindrical type for fire fighting purposes (Second Revision) |
CED 22 |
| 80 |
IS 4928 : 1986 |
Specification for delivery valve for centrifugal fire pump outlets (First Revision) |
CED 22 |
| 81 |
IS 13095 : 2020 |
Butterfly Valves for General Purposes ( First Revision ) |
MED 17 |
| 82 |
IS 15500 : Part 1 to 8 : 2004 |
Deepwell handpumps, components and special tools - Specification |
MED 27 |
| 83 |
IS/ISO/IEC 20547 : Part 3 : 2020 |
Information technology Big data reference architecture Part 3: Reference architecture |
LITD 30 |
| 84 |
IS/ISO 12812 : Part 1 : 2017 |
Core banking- Mobile financial services- Part 1: General framework |
SSD 3 |
| 85 |
IS 16015 : 2013 |
Mortice locks with lever mechanism (Vertical Type, Sliding Door Locks And Dead Locks) - Specification |
MED 33 |
| 86 |
IS 11228 : 1985 |
Recommendations for design of screw hoists for hydraulic gates |
WRD 12 |
| 87 |
IS 11501 : 1986 |
Specification for engine monoset pumps for clear, cold, fresh water for agricultural purposes |
MED 20 |
| 88 |
IS 906 : 1988 |
Specification for revolving branch pipe for fire fighting (Third Revision) |
CED 22 |
