1
IS 10018 : 1981 Specification for lacquer, cellulose nitrate, clear, finishing, glossy for wood
2024
Product Specification
2
IS 10066 : 1981 Specification for corugated fibreboard boxes for packing cigarettes
2024
Product Specification
3
IS 10081 : 1981 Terms relating to commercial explosives, pyrotechnics and blasting practices
2021
Terminology
4
IS 10089 : 1981 Specification for metal lasts for knee boots
2023
Product Specification
5
IS 101 : Part 1 : Sec 3 : 1986 Methods of sampling and test for paints, varnishes and related products: Part 1 tests on liquid paints (general and physical): Sec 3 preparation of panels
2022
Methods of tests
6
IS 101 : Part 1 : Sec 6 : 1987 Methods of sampling and test for paints, varnishes and related products: Part 1 tests on liquid paints (general and physical): Sec 6 flash point (Third Revision)
2019
Methods of tests
7
IS 101 : Part 1 : Sec 7 : 2020 Methods of sampling and test for paints, varnishes and related products : Part 1 test on liquid paints (general and physical) : Sec 7 mass per 10 litres - determination of density - pycnometer method (Fourth Revision)
2024
Methods of tests
8
IS 101 : Part 2 : Sec 1 : 2018 Methods of sampling and test for paints, varnishes and related products: Part 2 test on liquid paints (chemical examination): Sec 1 water content (Fourth Revision)
2023
Methods of tests
9
IS 101 : Part 2 : Sec 3 : 2015 Methods of sampling and test for paints, varnishes and related products: Part 2 test on liquid paints (chemical examination): Sec 3 determination of volatile organic compound (VOC) content - Difference method
2020
Methods of tests
10
IS 101 : Part 2 : Sec 5 : 2017 Methods of sampling and test for paints, varnishes and related products: Part 2 test on liquid paints (chemical examination): Sec 5 determination of volatile organic compound content of low-VOC emulsion paints (In-Can VOC)
2022
Methods of tests
11
IS 101 : Part 3 : Sec 1 : 1986 Methods of sampling and test for paints, varnishes and related products: Part 3 tests on paint film formation: Sec 1 drying time (Third Revision)
2022
Methods of tests
12
IS 101 : Part 3 : Sec 4 : 1987 Methods of sampling and test for paints, varnishes and related products: Part 3 tests on paint film formation: Sec 4 finish (Third Revision)
2019
Methods of tests
13
IS 101 : Part 4 : Sec 1 : 1988 Methods of sampling and test for paints, varnishes and related products: Part 4 optical test: Sec 1 opacity (Third Revision)
2024
Methods of tests
14
IS 101 : Part 4 : Sec 3 : 1988 Methods of sampling and test for paints, varnishes and related products: Part 4 optical tests: Sec 3 light fastness test (Third Revision)
2024
Methods of tests
15
IS 101 : Part 4 : Sec 4 : 2020 Methods of Sampling and Test for Paints, Varnishes and Related Products : Part 4 optical test : Sec 4 gloss - determination of gloss value at 20 C, 60 C, and 80 C ( Fourth Revision )
2024
Methods of tests
16
IS 101 : Part 5 : Sec 1 : 1988 Methods of sampling and test for paints, varnishes and related products: Part 5 mechanical test on paint films: Sec 1 hardness tests (Third Revision)
2024
Methods of tests
17
IS 101 : Part 5 : Sec 2 : 1988 Methods of sampling and test for paints, varnishes and related products: Part 5 mechanical tests: Sec 2 flexibility and adhesion (Third Revision)
2024
Methods of tests
18
IS 101 : Part 5 : Sec 3 : 2019 Methods of sampling and test for paints, varnishes and related products: Part 5 mechanical tests: Sec 3 impact resistance - falling - weight test, large - Area indenter (Fifth Revision)
2024
Methods of tests
19
IS 101 : Part 5 : Sec 4 : 1988 Methods of sampling and test for paints, varnishes and related products: Part 5 Mechanical tests: Sec 4 Print free test (Third Revision)
2020
Methods of tests
20
IS 101 : Part 5 : Sec 5 : 2019 Methods of sampling and test for paints, varnishes and related products: Part 5 Mechanical tests: Sec 5 Impact resistance - Falling - weight test, small - area indenter
2023
Methods of tests
21
IS 101 : Part 6 : Sec 1 : 1988 Methods of sampling and test for paints, varnishes and related products: Part 6 durability tests: Sec 1 resistance to humidity under conditions of condensation (Third Revision)
2024
Methods of tests
22
IS 101 : Part 6 : Sec 2 : 1989 Methods of sampling and test for varnishes and related products: Part 6 durability test on paint films: Sec 2 keeping properties (Third Revision)
2024
Methods of tests
23
IS 101 : Part 6 : Sec 3 : 1990 Methods of sampling and test for paints, varnishes and related products: Part 6 durability tests on paint films: Sec 3 moisture vapour permeability (Third Revision)
2020
Methods of tests
24
IS 101 : Part 6 : Sec 5 : 1997 Method of sampling and test for paints, varnishes and related products: Part 6 durability test on Paint films: Sec 5 accelerated weathering test
2022
Methods of tests
25
IS 101 : Part 7 : Sec 1 : 1989 Methodsof sampling and test for paints, varnishes and related produdTs: Part 7 environmental tests on paint films: Sec 1 resistance to water (Third Revision)
2024
Methods of tests
26
IS 101 : Part 7 : Sec 2 : 1990 Methods of sampling and test for paints,varnishes and related products: Part 7 environmental tests on paint films: Sec 2 resistance to liquids (Third Revision)
2020
Methods of tests
27
IS 101 : Part 7 : Sec 3 : 2020 Methods of sampling and test for paints, varnishes and related products: Part 7 environmental tests on paint films: Sec 3 determination of the effect of heat ( Fourth Revision )
2024
Methods of tests
28
IS 101 : Part 7 : Sec 4 : 1990 Methods of sampling and test for paints, varnishes and related products: Part 7 environmental tests on paint films: Sec 4 resistance to bleeding of pigments (Third Revision)
2022
Methods of tests
29
IS 101 : Part 8 : Sec 1 : 1989 Methods of sampling and test for paints, varnishes and related products: Part 8 tests for pigments and other solids: Sec 1 residue on sieve (Third Revision)
2024
Methods of tests
30
IS 101 : Part 8 : Sec 2 : 1990 Methods of sampling and test for paints, varnishes and related products: Part 8 tests for pigments and other solids: Sec 2 pigments and non - volatile matter (Third Revision)
2022
Methods of tests
31
IS 101 : Part 8 : Sec 3 : 1993 Methods of sampling and test for paints, varnishes and related products: Part 8 tests for pigments and other solids: Sec 3 ash content (Third Revision)
2024
Methods of tests
32
IS 101 : Part 8 : Sec 4 : 2015 Methods of sampling and test for paints, varnishes and related products: Part 8 tests for pigments and other solids: Sec 4 phthalic anhydride (Fourth Revision)
2020
Methods of tests
33
IS 101 : Part 8 : Sec 6 : 1993 Methods of sampling and test for paints,varnishes and related products: Part 8 tests for pigments and other solids: Sec 6 volume solids
2024
Methods of tests
34
IS 101 : Part 9 : Sec 1 : 1993 Methods of sampling and test for paints, varnishes and related products: Part 9 tests for lacquers and varnish: Sec 1 acid value (Third Revision)
2024
Methods of tests
35
IS 101 : Part 9 : Sec 2 : 1993 Methods of sampling and test for paints, varnishes and products: Part 9 tests for lacquers and varnish: Sec 2 rosin test (Third Revision)
2024
Methods of tests
36
IS 101 : Part 10 : Sec 2 : 2018 Methods of sampling and test for paints varnishes and related products: Part 10 instrumental analysis: Sec 2 electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Terms and definitions
2023
Methods of tests
37
IS 101 : Part 10 : Sec 3 : 2018 Methods of sampling and test for paints varnishes and related products: Part 10 instrumental analysis: Sec 3 electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Collection of data
2023
Methods of tests
38
IS 101 : Part 10 : Sec 4 : 2018 Methods of sampling and test for paints varnishes and related products: Part 10 instrumental analysis: Sec 4 electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Processing and analysis of data from dummy cells
2023
Methods of tests
39
IS 101 : Part 10 : Sec 5 : 2018 Methods of sampling and test for paints varnishes and related products: Part 10 instrumental analysis: Sec 5 electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Examples of spectra of polymer - Coated and uncoated specimens
2023
Methods of tests
40
IS 10106 : Part 2 : Sec 2 : 1983 Packaging code: Part 2 packaging materials section 2 paper and paper board
2025
Code of Practice
41
IS 10106 : Part 4 : Sec 2 : 1984 Packagng code: Part 4 packages section 2 paper and paper based packages
2025
Code of Practice
42
IS 10115 : 1982 Specification for phosphorus pentasulphide
2025
Product Specification
43
IS 10116 : 2015 Boric acid - Specification (First Revision)
2024
Product Specification
44
IS 10125 : 1982 Specification for copper carbonate
2025
Product Specification
45
IS 10126 : 1986 Specification for sparklers (First Revision)
2021
Product Specification
46
IS 10133 : 1982 Specification for glass bottles - Dimensional relationships and tolerances
2024
Dimensions
47
IS 1015 : 2000 Leather pump buckets and seat valves made from vegetable taned leather - Specification (Second Revision)
2019
Product Specification
48
IS 1017 : 1983 Specification for chamois leather (Second Revision)
2024
Product Specification
49
IS 10176 : 1982 Specification for fibreboard boxes for packing of soaps
2024
Product Specification
50
IS 10177 : 1982 Specification for ice cream cups and lids
2024
Product Specification
51
IS 10212 : Part 1 : 1986 General requirements of packages for explosives: Part 1 coommercial high explosives (First Revision)
2021
Product Specification
52
IS 10224 : 1982 Ergonomic Principles in the Design of Work Systems
2019
Code of Practice
53
IS 10245 : Part 1 : 1996 Breathing Apparatus: Part 1 closed circuit breathing apparatus (Compressed Oxygen Cylinder) - Specification (First Revision)
2022
Product Specification
54
IS 10245 : Part 4 : 1982 Specification for breathing apparatus: Part 4 escape breathing apparatus (Short Duration Self - Contained Type)
2019
Product Specification
55
IS 10246 : 1982 Specification for N, N - Diethyl - P - Phenylene diamine sulphate, photographic grade
2024
Product Specification
56
IS 10271 : 1982 Specification for anhydrous hydrogen fluoride, technical
2024
Product Specification
57
IS 10279 : 1982 Specification for overall trimmed sizes of articles of stationery that include detachable sheets
2025
Dimensions
58
IS 10286 : 2013 BLEACHING SYNTANS — SPECIFICATION
2024
Product Specification
59
IS 10328 : 1982 Method of expression of dimensions and direction of manufacture of unprocessed writing and printing paper
2023
Code of Practice
60
IS 10329 : 1982 Method for sensitometry of photographic papers
2024
Methods of tests
61
IS 10332 : 1982 Specification for hydrofluoric acid, aqueous
2024
Product Specification
62
IS 10373 : 1982 Specification for plastic boxes for safety matches
2021
Product Specification
63
IS 10391 : 1982 Code of Practice for Chemical Cleaning of Boilers
2022
Code of Practice
64
IS 10392 : 1982 Specification for Feed Water and Boiler Water for Low and Medium Pressure Boilers
2022
Product Specification
65
IS 10396 : 1982 Methods for determination of curl of photographic film
2024
Methods of tests
66
IS 104 : 2017 Specification for ready mixed paint, brushing, zinc chrome, priming (Third Revision)
2022
Product Specification
67
IS 10405 : 1982 Specification for black centred board
2024
Product Specification
68
IS 10419 : 1982 Method for determination of brittleness of photographic film
2024
Methods of tests
69
IS 10429 : 2011 Powdered talc for ceramic industry - Specification (First Revision)
2024
Product Specification
70
IS 10472 : 1983 Specification for filter aid powder for use in electroplating
2024
Product Specification
71
IS 10497 : 2018 Method of test for the determination of brimful capacity of glass containers by gravimetric method (First Revision)
2023
Methods of tests
72
IS 10516 : 2018 Method of test for internal pressure resistance of glass containers (First Revision)
2023
Methods of tests
73
IS 10523 : 2014 Baby toilet soap - Specification (First Revision)
2024
Product Specification
74
IS 10528 : 1983 Method of sampling empty paper sacks for testing
2024
Methods of tests
75
IS 10535 : 1983 Specification for manganese sulphate, monohydrate
2025
Product Specification
76
IS 10555 : 2002 Exfoliated vermiculite - Specification (First Revision)
2024
Product Specification
77
IS 10556 : 2014 Storage and handling of thermal insulation materials - Code of practice (First Revision)
2024
------
78
IS 10557 : 1983 Specification for Paper Tape Rolls for Data Processing
2022
Product Specification
79
IS 10592 : 2018 Industrial Emergency Showers, Eye and Face Fountains and Combination Units - Specification (First Revision)
2023
Product Specification
80
IS 1060 : Part 2 : 1960 Methods of sampling and test for paper and allied products: Part 2
2024
Methods of tests
81
IS 1060 : Part 3 : 1969 Methods of sampling and test for paper and allied products: Part 3
2024
Methods of tests
82
IS 1060 : Part 4 : Sec 12 : 2019 Methods of sampling and test for paper and allied products: Part 4 methods of test for paper, board and pulps: Sec 12 determination of cadmium content - Atomic absorption spectrometric method
2023
Methods of tests
83
IS 1060 : Part 4 : Sec 13 : 2020 Methods of Sampling and Test for Paper and Allied Products Part 4 Methods of Test for Paper, Board and Pulps Section 13 Measurement of diffuse blue reflectance factor — Indoor daylight conditions ( ISO brightness ) ( First Revision )
2025
Methods of tests
84
IS 1060 : Part 5 : Sec 1 : 2014 Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 1 sampling to determine average quality
2024
Methods of tests
85
IS 1060 : Part 5 : Sec 3 : 2014 Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 3 determination of thickness, density and specific volume
2024
Methods of tests
86
IS 1060 : Part 5 : Sec 6 : 2014 Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 6 determination of tensile properties - Constant rate of elongation method (20 Mm/min)
2024
Methods of tests
87
IS 1060 : Part 5 : Sec 9 : 2014 Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 9 determination of resistance to picking - Accelerated speed method using the igt - Type tester (Electric Model)
2024
Methods of tests
88
IS 1060 : Part 5 : Sec 10 : 2015 Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 10 determination of smoothness (Bekk Method)
2025
Methods of tests
89
IS 1060 : Part 5 : Sec 14 : 2014 Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 14 determination of air permeance and air resistance (Medium Range) - Gurley method
2024
Methods of tests
90
IS 1060 : Part 5 : Sec 16 : 2015 Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 16 determination of capillary rise - Klemm method
2025
Methods of tests
91
IS 1060 : Part 5 : Sec 20 : 2018 Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 20 determination of roughness/smoothness (Air Leak Methods) - Bendtsen method
2023
Methods of tests
92
IS 1060 : Part 5 : Sec 21 : 2019 Method of Sampling and Test for Paper and Allied Products Part 5 Method of Test for Paper and Board Section 21 Determination of roughness / smoothness ( Air leak methods ) — Sheffield method
2023
Methods of tests
93
IS 1060 : Part 6 : Sec 1 : 2014 Methods of sampling and test for paper and allied products: Part 6 methods of test for paper: Sec 1 determination of tearing resistance - Elmendorf method
2024
Methods of tests
94
IS 1060 : Part 6 : Sec 3 : 2015 Methods of sampling and test for paper and allied products: Part 6 methods of test for paper and board: Sec 3 determination of folding endurance of paper
2025
Methods of tests
95
IS 10614 : 1983 Method for atomic absorption spectrophotometric determination of sodium and potassium
2024
Methods of tests
96
IS 1064 : 1980 Specification for paper (Second Revision)
2023
Dimensions
97
IS 10640 : 2011 Soxhlet extractors - Specification (First Revision)
2022
Product Specification
98
IS 1065 : Part 1 : 2019 Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)
2023
Methods of tests
99
IS 1065 : Part 2 : 2019 Stable bleaching powder - Specification: Part 2 treatment of water intended for drinking
2023
Methods of tests
100
IS 10668 : 1983 Specification for sodium formaldehyde bisulphite, anhydrous, photographic grade
2024
Product Specification
101
IS 10758 : 1983 Specification for de - Odourizing - Cum - Disinfectant fluids
2022
Product Specification
102
IS 10821 : 1984 Specification for calcium nitrate for explosive industry
2021
Product Specification
103
IS 10845 : 1984 Specification for bag, pilot
2019
Product Specification
104
IS 10870 : 1984 Code of Safety for Hexane
2021
Code of Practice
105
IS 10871 : 1984 Code of Safety for Hydrzine and Hydrazine Hydrate
2021
Code of Practice
106
IS 10896 : 1984 Specification for aluminium hydroxide, technical
2024
Product Specification
107
IS 10897 : 1984 Specification for zinc phosphate pigment for paints
2024
Product Specification
108
IS 109 : 2017 Specification for ready mixed paint, finishing, priming, plaster, to indian standard colour no. 361 light stone and no. 631 light grey, white and off - White (Second Revision)
2022
Product Specification
109
IS 1090 : 2002 Compressed Hydrogen - Specification (Third Revision)
2023
Product Specification
110
IS 10920 : 1984 Code of Safety for Phosphorus Trichloride
2021
Code of Practice
111
IS 10945 : 1984 Specification for shanks for footwear
2023
Product Specification
112
IS 110 : 2017 Ready mixed paint, brushing, grey filler, for enamels for use over primers - Specification (Third Revision)
2022
Product Specification
113
IS 1106 : 1986 Specification for distilled water glass bottles (First Revision)
2022
Product Specification
114
IS 1107 : 1986 Specification for aerated water glass bottles, crown finish type (Second Revision)
2022
Product Specification
115
IS 11087 : 1986 Specification for paper for magnetic ionk character recognition cheque printing (First Revision)
2023
Product Specification
116
IS 11091 : 1984 Method of test for degree of curl of paper and degree of sizing
2023
Methods of tests
117
IS 11112 : 1984 SpecificatlOn for alumina, chromatographic grade
2024
Product Specification
118
IS 1112 : Part 1 : 1989 Glass shells for general lighting service lamps: Part 1 - 60 to 80 mm shell diameter (Second Revision)
2024
Product Specification
119
IS 1112 : Part 2 : 1989 Glass shells for general lighting service lamps - Specification: Part 2 81 to 130 mm shell diameter (Second Revision)
2019
Product Specification
120
IS 11123 : 1984 Method for determination of copper by atomic absorption spectrophotometry
2024
Methods of tests
121
IS 11124 : 1984 Method for atomic absorption spectrophotometric determination of arsenic
2024
Methods of tests
122
IS 11128 : 2018 Spray applied hydrated calcium silicate thermal insulation
2023
Service Specification
123
IS 11129 : 2018 Method of test for tumbling friability of preformed block - Type thermal insulation (First Revision)
2023
Methods of tests
124
IS 11141 : 1984 Code of Safety for Acrylonitrile
2021
Code of Practice
125
IS 11153 : 1996 Manganese dioxide for dry batteries - Specification (First Revision)
2024
Product Specification
126
IS 1116 : 1994 Glass globes for hurricane lanterns - Specification (First Revision)
2022
Product Specification
127
IS 1117 : 2018 Laboratory glassware - Single - Volume pipettes (Second Revision)
2023
Product Specification
128
IS 11224 : 1985 Specification for rock phosphate for chemical industries
2024
Product Specification
129
IS 11226 : 1993 Leather safety footwear having direct moulded rubber sole specification (First Revision)
2023
Product Specification
130
IS 11236 : 1985 Specification for manganese acetate
2024
Product Specification
131
IS 11239 : PART 1 : 2009 Methods of test for rigid cellular thermal insulation materials: Part 1 dimensions
2024
Methods of tests
132
IS 11239 : Part 2 : 2019 Method of test for rigid cellular thermal insulation materials: Part 2 apparent density (Second Revision)
2024
Methods of tests
133
IS 11239 : Part 3 : 2009 Method of test for rigid cellular thermal insulation materials: Part 3 dimensional stability (First Revision)
2024
Methods of tests
134
IS 11239 : Part 5 : 2019 Method of test for rigid cellular thermal insulation materials: Part 5 volume percent of open and closed cells (Second Revision)
2024
Methods of tests
135
IS 11239 : Part 6 : 1985 Methods of test for rigid cellular thermal insulation materials: Part 6 heat distortion temperature
2024
Methods of tests
136
IS 11239 : Part 7 : 1985 Methods of test standard for rigid cellular thermal insulation materials: Part 7 coefficient of linear thermal expansion at low temperatures
2024
Methods of tests
137
IS 11239 : Part 9 : 1988 Methods of test for rigid cellular thermal insulation materials: Part 9 water absorption
2024
Methods of tests
138
IS 11239 : Part 10 : 1985 Methods of test for rigid cellular thermal insulation materials: Part 10 flexural strength
2024
Methods of tests
139
IS 11239 : Part 12 : 1988 Methods of test for rigid cellular thermal insulation materials: Part 12 horizontal burning characteristics
2024
Methods of tests
140
IS 11239 : Part 13 : 1992 Methods of test for rigid cellular thermal insulation materials: Part 14 determination of flammability by oxygen index
2024
Methods of tests
141
IS 11255 : Part 1 : 1985 Methods for measurement of emissions from stationary sources: Part 1 particulate matter
2024
Methods of tests
142
IS 11255 : Part 2 : 1985 Methods for measurement of emissions from stationary sources: Part 2 sulphur dioxide
2024
Methods of tests
143
IS 11255 : Part 3 : 2008 Methods for measurement of emissions from stationary sources: Part 3 flow rate (First Revision)
2023
Methods of tests
144
IS 11255 : Part 4 : 2006 Method for measurement of emission from stationary sources: Part 4 hydrogen sulphide and carbon disulphide (First Revision)
2022
Methods of tests
145
IS 11255 : Part 5 : 1990 Methods of measurement of emissions from stationary sources: Part 5 total fluoride
2024
Methods of tests
146
IS 11255 : Part 6 : 1999 Methods of measurement of emissions from stationary sources: Part 6 ammonia
2024
Methods of tests
147
IS 11255 : Part 7 : 2005 Methods for measurement of emission from stationary sources: Part 7 oxides of nitrogen
2022
Methods of tests
148
IS 11255 : Part 10 : 2019 Methods for measurement of emission from stationary sources: Part 10 calibration of automated measuring systems for greenhouse gases
2024
Methods of tests
149
IS 11255 : Part 11 : 2019 Methods for measurement of emission from stationary sources: Part 11 ongoing quality control of automated measuring systems of greenhouse gases
2024
Methods of tests
150
IS 11255 : Part 12 : 2019 Methods for Measurement of Emission from Stationary Sources Part 12 Determination of the Mass Concentration of Dinitrogen Monoxide (N2O) — Reference Method : Non-Dispersive Infrared Method
2024
Methods of tests
151
IS 11255 : Part 13 : 2019 Methods for Measurement of Emission from Stationary Sources Part 13 Automatic Method for the Determination of Methane Concentration Using Flame Ionization Detection ( FID )
2024
Methods of tests
152
IS 11255 : Part 15 : 2019 Methods for Measurement of Emission from Stationary Sources Part 15 Determination of the Methane Concentration Using Gas Chromatography
2024
System Standard
153
IS 11264 : 1985 Code of practice for manufacture of safety rubber canvas footwear for miners
2021
Code of Practice
154
IS 11303 : 2017 Transparent toilet soap - Specification (First Revision)
2022
Product Specification
155
IS 11305 : 1985 Specification for thionyl chloride
2024
Product Specification
156
IS 11357 : 1985 Specification for composite container for dry products
2024
Product Specification
157
IS 11369 : 1985 Specification for glass honey jars
2022
Product Specification
158
IS 11468 : 2012 Laboratory glassware - Pipettes - Colour coding (First Revision)
2022
Code of Practice
159
IS 11469 : 2016 Laboratory glassware - Methods for assessing the chemical resistance of enamels used for colour coding and colour marking (First Revision)
2021
Methods of tests
160
IS 11475 : 2002 Stoneware crockeryware - Specification (Second Revision)
2018
Product Specification
161
IS 11477 : 2011 Pyrophyllite for ceramic industry - Specification (First Revision)
2021
Product Specification
162
IS 11479 : Part 2 : 2020 Antibacterial Toilet Soap — Specification Part 2 Liquid ( Second Revision )
2025
Product Specification
163
IS 11483 : 1985 Specification for amorces (Paper Caps For Toy Piston)
2021
Product Specification
164
IS 11490 : 1985 Methods of radiological test for water
2024
Methods of tests
165
IS 11491 : 1985 Specification for blasting soluble nitrocellulose for explosives industry
2021
Product Specification
166
IS 11503 : 2018 Slates, writing, school - Specification (First Revision)
2022
Product Specification
167
IS 11539 : 2018 Method of vertical load test for glass containers (First Revision)
2023
Methods of tests
168
IS 11601 : 2002 Methods of safety evaluation of synthetic detergents - Tests for skin irritation and sensitization potential of synthetic detergents (First Revision)
2019
Methods of tests
169
IS 11673 : Part 1 : 2019 Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision)
2023
Product Specification
170
IS 11673 : Part 2 : 2019 Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision)
2023
Product Specification
171
IS 11744 : 2020 Phosphorous Pentachloride, Technical - Specification ( First Revision )
2024
Product Specification
172
IS 11749 : 1986 Specification for manually operated toggle clips for leather industry
2019
Product Specification
173
IS 11750 : 1986 Specification for brush fitch , flat, with long handle
2023
Product Specification
174
IS 11788 : 1986 Specification for 2 - Amino - 5 - Diethylaminotoluene hydrochloride, photographic grade
2024
Product Specification
175
IS 11803 : 1986 Specification for magnesium oxide for explosive ammunition protective compositions and pyrotechnic industry
2021
Product Specification
176
IS 11844 : 1987 Specification for corrugated fibreboard boxes for transport packaging of apples
2024
Product Specification
177
IS 11883 : 2017 Ready mixed paint, brushing, red oxide, priming for metals specification (First Revision)
2022
Product Specification
178
IS 11930 : 2018 Glass containers - Thermal shock resistance and thermal shock endurance - Test methods (First Revision)
2023
Methods of tests
179
IS 11944 : 1987 Specification for wallet, leather
2019
Product Specification
180
IS 11984 : 1986 Specification for glass bottles for free flowing liquids
2022
Product Specification
181
IS 11985 : 1987 Specification for glass jars for pickles
2023
Product Specification
182
IS 11987 : 2013 Wax - Emulsion for leather finishing - Specification (First Revision)
2024
Product Specification
183
IS 12010 : 1987 Specification for shoe polish, liquid
2023
Product Specification
184
IS 12033 : 1986 Code of Safety for Dinitrotoluene (Dnt)
2021
Code of Practice
185
IS 12034 : 1986 Code of Safety for Methyl Bromide
2021
Code of Practice
186
IS 12035 : 1986 Code of Safety in Microbiological Laboratories
2021
Code of Practice
187
IS 12041 : 1987 Method for the determination of mercury by atomic absorption spectrophotometer
2024
Methods of tests
188
IS 12042 : 1987 Method for determination of molybdenum by atomic absorption spectrophotometer
2024
Methods of tests
189
IS 12046 : 1987 Method for the determination of manganese by atomic absorption spectrophotometer
2024
Methods of tests
190
IS 12074 : 1987 Method for determination of lead by atomic absorption spectrophotometer
2024
Methods of tests
191
IS 12084 : 2018 Morpholine - Specification (First Revision)
2023
Product Specification
192
IS 12085 : 2020 Cyclohexylamine for Boiler Water Treatment - Specification ( First Revision )
2025
Product Specification
193
IS 12086 : 2020 Hydrazine Hydrate - Specification ( First Revision )
2025
Product Specification
194
IS 12122 : 1987 Method for determination of nickel by atomic absorption spectrophotometry
2024
Methods of tests
195
IS 12123 : 1987 Specification for aluminium polish, liquid for aircraft
2023
Product Specification
196
IS 12141 : 1987 Code of Safety for Methyl Ethyl Ketone
2021
Code of Practice
197
IS 12142 : 1987 Code of Safety for 1,1,1 - Trichloro Ethane
2021
Code of Practice
198
IS 12143 : 1987 Code of Safety for Tetrachloroethane
2021
Code of Practice
199
IS 12212 : 1987 Specification for corrugated fibreboard boxes for transport packaging of butter packed in primary cartons
2024
Product Specification
200
IS 1222 : 1992 Ink, duplicating, for twin cylinder rotary machines - Specification (Third Revision)
2025
Product Specification
201
IS 12236 : 1987 Specification for paper page rolls for adding machines/calculators
2022
Product Specification
202
IS 12238 : 1987 Specification for colour and star matches in boxes
2021
Product Specification
203
IS 12240 : Part 1 : 1988 Methods of test for polyvinyl chloride boots: Part 1 measurement of thickness
2023
Methods of tests
204
IS 12240 : Part 2 : 1988 Methods of test for polyvinyl chloride boots: Part 2 determination of durometer hardness, shore A
2023
Methods of tests
205
IS 12240 : Part 3 : 1988 Methods of test for polyvinyl chloride boots: Part 3 determlNatlOn of relative density
2023
Methods of tests
206
IS 12240 : Part 4 : 1988 Methods of test polyvinyl chloride for boots: Part 4 determination of volatility
2023
Methods of tests
207
IS 12240 : Part 5 : 1988 Methods of test for polyvinyl chloride boots:: Part 5 determination of lead content
2023
Methods of tests
208
IS 12240 : Part 6 : 1988 Methods of test for polyvinyl chloride boots: Part 6 determination of tensile strength and elongation at break
2023
Methods of tests
209
IS 12240 : Part 7 : 1988 Methods of test for polyvinyl chloride boots: Part 7 flexing test - Resistance to cut growth for soling material
2023
Methods of tests
210
IS 12240 : Part 8 : 1988 Methods of test for polyvinyl chloride boots: Part 8 resistance to flexing for polyvinyl chloride upper material
2023
Methods of tests
211
IS 12244 : Part 1 : 1988 Specification for calorimeter thermometers: Part 1 solid - Stem thermometers
2023
Product Specification
212
IS 12244 : Part 2 : 1988 Specification for calorimeter thermometers: Part 2 enclosed scale thermometers
2023
Product Specification
213
IS 12276 : 1988 Specification for dextrin for explosive and pyrotechnic industry
2021
Product Specification
214
IS 12292 : 1988 Specification for lead suboxide (Lead Oxide) for lead - Acid storage battery
2025
Product Specification
215
IS 12305 : 2018 Laboratory Sintered (Fritted) Filters, Porosity Grading, Classification and Designation (First Revision)
2022
Product Specification
216
IS 12432 : Part 3 : 2002 Application of spray applied insulation - Code of practice: Part 3 polyurethane/polyisocyanurate
2024
Code of Practice
217
IS 12435 : 1988 Guidelines for grading of hides and skins on the basis of mass and size
2020
Code of Practice
218
IS 12436 : 1988 Specification for preformed rigid polyurethane (Pur) and polyisocyanurate (Pir) foams for thermal insulation
2022
Product Specification
219
IS 12437 : 1988 Specification for zirconium powder for use in explosive and pyrotechnic industry
2023
Product Specification
220
IS 12478 : 1988 Specification for ammonium sulphate,technical
2025
Product Specification
221
IS 12490 : 1988 Specification for glassine paper
2024
Product Specification
222
IS 12491 : 1988 Method for determination of magnesium by atomic absorption spectrophotometry
2024
Methods of tests
223
IS 12496 : 1988 Sizes of film for industrial radiography
2024
Product Specification
224
IS 12517 : 1988 Specification for sizes of photographic film for graphic arts use
2024
Product Specification
225
IS 12518 : 1988 Shellac bond powder - Specification
2023
Product Specification
226
IS 12519 : 1988 Specification for zinc pyrophosphate for electroplating
2024
Product Specification
227
IS 12533 : 1988 Specification for sizes of paper in rolls for phototypesetting and photolettering devices
2024
Product Specification
228
IS 12551 : 1988 Specification for potassium pyrophosphate for electroplating
2024
Product Specification
229
IS 12557 : 1988 Specification for sodium pyrophosphate for electroplating
2024
Product Specification
230
IS 12581 : 1989 Glass containers for domestic fruit preserving - Specification
2021
Product Specification
231
IS 12607 : 1989 Measurement of hides and skin in the wet blue condition - Guidelines
2019
Code of Practice
232
IS 12612 : 1988 Method for Colorimetric - determinatxon of tungsten
2024
Methods of tests
233
IS 12621 : 1988 Bentonite for ceramic industry - Specification
2022
Product Specification
234
IS 12630 : 1989 Pyrotechnics - Fireworks black serpent pellets - Specification
2021
Product Specification
235
IS 12631 : 1989 Pyrotechnics - fireworks pencils - Specification
2021
Product Specification
236
IS 12632 : 1989 Pyrotechnics - Fireworks twinkling stars - Specification
2021
Product Specification
237
IS 12659 : 1989 Leather - Measurement of thickness of surface coating on leather - Method of test
2024
Methods of tests
238
IS 12671 : 1989 Hides and skins, fresh or cured - Glossary of defects
2019
Terminology
239
IS 12684 : 1989 Calcium stearate for explosives and - Pyrotechnic industry - Specification
2021
Product Specification
240
IS 12715 : 1989 Polyvinyl alcohol for sizing of paper - Specification
2024
Product Specification
241
IS 12739 : 1989 Fireworks conical flowerpots - Specification
2023
Product Specification
242
IS 12744 : 2013 Ready mixed paint, air drying, red oxide - zinc phosphate, priming - Specification : Part 1 for domestic and decoratvie applications (First Revision)
2023
Product Specification
243
IS 12795 : 2020 Linear Alkyl Benzene — Specification ( First Revision )
2025
Product Specification
244
IS 12816 : 1989 Density - Composition tables for aqueous solutions of nitric acid - Specification
2024
Others
245
IS 12845 : 1989 Density - Composition tables for aqueous solutions of hydrochlortc acid - Specification
2024
Others
246
IS 12865 : 1989 Potassium persulphate, photographic grade - Specification
2024
Product Specification
247
IS 12868 : 1989 Glass aerosol containers - Specification
2021
Product Specification
248
IS 12869 : Part 3 : 1998 Methods for determination of viscosity and viscometric fixed points of glass: Part 3 determination of annealing and strain point by beam bending method
2023
Methods of tests
249
IS 1288 : 1982 Methods of test for mineral gypsum (Second Revision)
2025
Methods of tests
250
IS 1289 : 1960 Methods for sampling of mineral gypsum
2025
Others
251
IS 12920 : 1990 Brushes, drain cleaning (Without Handle) - Specification
2023
Product Specification
252
IS 12921 : 1990 Lac dye - Specification
2023
Product Specification
253
IS 12925 : 1990 Ferric ammonium edta solution photographic grade - Specification
2024
Product Specification
254
IS 12928 : 1990 Precipitated barium carbonate for ceramic and glass industry - Specification
2023
Product Specification
255
IS 12980 : 1990 Fireworks rockets - Specification
2021
Product Specification
256
IS 12999 : 1990 Folding box board, coated - specification
2024
Product Specification
257
IS 13014 : 1990 Sodium gluconate for electroplating - Specification
2024
Product Specification
258
IS 13022 : 1991 Enzyme bates (Alkaline) - specification
2019
Product Specification
259
IS 13023 : 1991 Enzyme bates (Acidic) - Specification
2019
Product Specification
260
IS 13024 : 2013 Syntans for prevention of sludge formation in vegetable tan liquor - Specification (First Revision)
2025
Product Specification
261
IS 13057 : 1991 Potassium iodate
2025
Product Specification
262
IS 13075 : 1991 Sizes of rolls of black and white and colour paper for roll paper printers
2024
Product Specification
263
IS 13104 : 1991 2 - Amino - 5[N - Ethyl N - 2, hydroxy ethyl] aminotoluene sulphate,photographic grade (CD - 4)
2024
Product Specification
264
IS 13160 : 1991 Aleuritic acid - Specification
2023
Product Specification
265
IS 13183 : 1991 Aluminium paint, heat resistant - Specification
2020
Product Specification
266
IS 13184 : 1991 Mastic filler, epoxy based - Specification
2020
Product Specification
267
IS 13213 : 2018 Polyurethane full gloss enamel (Two Pack) - Specification (First Revision)
2023
Product Specification
268
IS 13227 : 1991 Fireworks whistles - Specification
2021
Product Specification
269
IS 13228 : 2006 Corrugated fibreboard boxes for packing and transportation - Specification 2006 (First Revision)
2022
Product Specification
270
IS 13239 : 2016 Epoxy surfacer (Two Pack) - Specification (First Revision)
2021
Product Specification
271
IS 13270 : 1992 Test for gases by orsat and chromatographic methods - Methods
2024
Methods of tests
272
IS 13271 : 2013 Phenolic syntans - Methods of test (First Revision)
2025
Methods of tests
273
IS 13293 : 1992 Gas Detector Tubes - General Requirements and Methods of Test
2019
Product Specification
274
IS 13294 : 1992 Non-buffable floor polish, liquid - Specification
2023
Product Specification
275
IS 13295 : 1992 Code of practice for manufacture of safety leather boots and shoes for workers in the mines and heavy metal industries
2023
Code of Practice
276
IS 13299 : 1992 Balls for ball point pen refills specification
2024
Product Specification
277
IS 13307 : 1992 Resin finished shoe uppers from goat and sheep skins - Specification
2024
Product Specification
278
IS 13318 : 1992 Spectrophotometric determination of nickel test
2024
Methods of tests
279
IS 13319 : 1992 Determination of chromium by atomic absorption spectrophotometry test method
2024
Methods of tests
280
IS 13320 : 1992 Determination of iron by atomic absorption spectrophotometry - Test method
2024
Methods of tests
281
IS 13347 : 2018 Clutch pencils ? Specification (First Revision)
2022
Product Specification
282
IS 13348 : 1992 Brush, rubber squeezer, with handle - Specification
2023
Product Specification
283
IS 13366 : 1992 Resuscitators Intended for Use with Humans - Specification
2025
Product Specification
284
IS 13370 : 1992 Linear fatty alcohols for surface active agents - Specification
2024
Product Specification
285
IS 13424 : 2001 Safety evaluation of bathing bars and toilet soaps - Methods of test (First Revision)
2024
Methods of tests
286
IS 13425 : 1992 Ammonium nitrate for nitrous oxide production - Specification
2025
Product Specification
287
IS 13440 : 1992 Methyl Chloride - Code of Safety
2023
Code of Practice
288
IS 13441 : 1992 Ethyl ether - Code of safety
2018
Code of Practice
289
IS 13442 : 1992 Trichloro Ethylene - Code of Safety
2023
Code of Practice
290
IS 13443 : 1992 Methylene chloride for degreasing prior to electroplating - Specification
2024
Product Specification
291
IS 13447 : 1992 P - Nitro Aniline - Code of Safety
2023
Code of Practice
292
IS 13498 : 2017 Bathing bar - Specification (Second Revision)
2022
Product Specification
293
IS 13522 : 1992 Charcoal for explosives and pyrotechnic compositions - Specification
2021
Product Specification
294
IS 13524 : 1992 Potassium Perchlorate for Explosives and Pyrotechnic Compositions specification
2021
Product Specification
295
IS 13526 : 1992 Sodium perchlorate solution for explosives and pyrotechnic compositions - Specification
2021
Product Specification
296
IS 13527 : 2013 Replacement syntans - Specification (First Revision)
2024
Product Specification
297
IS 13528 : 2013 Pretanning syntans - Specification (First Revision)
2025
Product Specification
298
IS 13565 : 1992 Method for spectrophotometric determination of nitrite
2024
Methods of tests
299
IS 13606 : 2013 Synthetic sulphochlorinated fatliquors for leather processing - Specification (First Revision)
2025
Product Specification
300
IS 13607 : 1992 Heady mixed paint, finishing, general purposes, synthetic - Specification
2024
Product Specification
301
IS 13625 : 2013 Retanning syntans including acrylic and related syntans - Specification (First Revision)
2025
Product Specification
302
IS 13650 : 1993 Glass containers for proteinized food
2022
Product Specification
303
IS 13651 : 1993 1 - 1 - 1 trichloroethane (Methyl Chloroform) for electroplating - Specification
2024
Product Specification
304
IS 137 : 2017 Ready mixed paint, brushing, matt or eggshell flat, finishing, interior to indian standard colour as required - Specification (Second Revision)
2022
Product Specification
305
IS 13759 : 2017 Polyurethane primer, zinc phosphate (Two - Pack) for exterior painting of railway coaches - Specification (First Revision)
2022
Product Specification
306
IS 13798 : 1993 Polyurethane base knifing filler (Two Pack) for exterior painting of railway coaches - Specification
2024
Product Specification
307
IS 13799 : 2016 Polyurethane Base Surfacer (Two Pack) for Exterior Painting of Railway Coaches - Specification
2021
Product Specification
308
IS 138 : 2018 Ready mixed paint, marking, for packages and petrol containers - Specification (Fourth Revision)
2023
309
IS 13800 : 1993 Shoe sizes - Method of marking
2022
Methods of tests
310
IS 1381 : Part 1 : 2003 Laboratory glassware - Narrow - Necked boiling flasks (Second Revision)
2022
Product Specification
311
IS 1381 : Part 2 : 2019 Laboratory glassware - Boiling flasks: Part 2 boiling flasks with conical ground joints (Third Revision)
2023
Product Specification
312
IS 1382 : 1981 Glossary of terms relating to glass and glassware (First Revision)
2023
Terminology
313
IS 1388 : Part 1 : 2019 Laboratory glass ware - Bottles: Part 1 screw neck bottles (Third Revision)
2023
Product Specification
314
IS 13893 : 1994 Polyurethane soles semirigid - specification
2023
Product Specification
315
IS 139 : 2018 Ready mixed paint, marking, quick drying, for marking with rubber stamps - Specification (Third Revision)
2023
Product Specification
316
IS 13910 : 1993 Sulphur Dioxide - Code of Safety
2023
Code of Practice
317
IS 13911 : 1993 Sulphur - Code of Safety
2023
Code of Practice
318
IS 13914 : 1993 Perchlorates of Ammonium, Potassium and Sodium - Code of Safety
2023
Code of Practice
319
IS 1392 : 1999 Glass milk bottles - Specification (Fourth Revision)
2023
Product Specification
320
IS 13969 : Part 11 : 2018 Water quality - Sampling: Part 11 guidance on sampling of groundwaters (First Revision)
2023
Code of Practice
321
IS 13975 : 1994 Axial (End - To - End) compression strength of composite cans, tubes and cores - Method of test
2023
Methods of tests
322
IS 13976 : 1994 Method of end blow - Off pressure test for composite cans
2023
Methods of tests
323
IS 13977 : 1994 Polish, liquid, multipurpose - Specification
2023
Product Specification
324
IS 1398 : 1982 SPECIFICATION FOR PACKING PAPER, WATER PROOF, BITUMEN-LAMINATED
2024
Product Specification
325
IS 13995 : 1995 Unlined moulded rubber boots - Specification
2023
Product Specification
326
IS 140 : 2015 Ready mixed paint, exterior, petrol resisting, air drying - Specification (Second Revision)
2020
Product Specification
327
IS 14164 : 2008 Industrial application and finishings of thermal insulation materials at temperatures above - 80°C and up to 750°C - Code of practice (First Revision)
2024
Code of Practice
328
IS 14165 : 1995 Handling Carcinogenic Substances - Code of Safety
2018
Code of Practice
329
IS 14179 : 1999 Methods of test for ceramic tableware
2025
Methods of tests
330
IS 1419 : 1989 Antifouling paint, brushing, for ships bottom and hulls - Specification (Second Revision)
2024
Product Specification
331
IS 14194 : Part 5 : 2013 Radionuclides in environmental samples - Methods of estimation: Part 5 Sampling
2023
Methods of tests
332
IS 14199 : 1995 Steam Purity - Methods of Sampling and Test
2022
Methods of tests
333
IS 142 : 2017 Specification for ready mixed paint, exterior, petrol resisting, stoving (Second Revision)
2022
Product Specification
334
IS 1420 : 1989 Light basic magnesium carbonate - Specification (Second Revision)
2025
Product Specification
335
IS 14209 : 2016 Epoxy enamel, two component, glossy - Specification (First Revision)
2021
Product Specification
336
IS 14211 : 1994 Molecular sieves - Specification
2025
Product Specification
337
IS 14212 : 1995 Sodium and potassium silicates - Method of test
2025
Methods of tests
338
IS 14295 : 1995 Calcium fluoride - Specification
2025
Product Specification
339
IS 14305 : 1995 Basiclead carbonate - Specification
2025
Product Specification
340
IS 14314 : 1995 Thinner, general purpose, for synthetic paints and varnishes - Specification
2022
Product Specification
341
IS 14319 : 1995 Laminated paper board pack for vanaspati - Specification
2024
Product Specification
342
IS 14360 : 2012 Semichrome suede upper leather - Specification (First Revision)
2022
Product Specification
343
IS 14361 : 2011 Patent leather - Specification (First Revision)
2022
Product Specification
344
IS 144 : 1950 Specification for ready mixed paint, brushing, petrol resisting, air - Drying, for interior painting of tanks and container & red oxide (Colour Unspecified)
2024
Product Specification
345
IS 14488 : 2013 Sulphited fatliquors for leather - Specification (First Revision)
2025
Product Specification
346
IS 14489 : 2018 Occupational Health and Safety Audit - Code of Practice (First Revision)
2023
Code of Practice
347
IS 145 : 1950 Specification for ready mixed paint, slushing, petrol resisting, air - Drying, for interior painting of tanks and - Containers, red oxide, (Colour Unspecified)
2024
Product Specification
348
IS 14506 : 1998 Epoxy redoxide zinc phosphate weldable primer,two component - Specification
2024
Product Specification
349
IS 14589 : 1999 Zinc priming paint, epoxy based, two - Pack - Specification
2019
Product Specification
350
IS 146 : 1950 Specification for ready mixed paint, brushing, petrol resisting, stoving, for interior painting of tanks and containers, red oxide (Colour Unspecified)
2024
Product Specification
351
IS 14619 : 1998 Release base paper - Specification
2023
Product Specification
352
IS 14631 : 1999 Styrene - Code of Safety
2021
Code of Practice
353
IS 14656 : 1999 Ceramic fibre products - Methods of test
2022
Methods of tests
354
IS 14661 : 1999 Toilet paper - Specification
2021
Product Specification
355
IS 147 : 1950 Specification for ready mixed paint, slushing, petrol resisting, stoving for interior painting of tanks and containers, red oxide (Colour Unspecified)
2019
Product Specification
356
IS 14705 : 1999 Vitreous china crockeryware - Specification
2025
Product Specification
357
IS 14780 : 2000 Zinc naphthenate - Specification
2025
Product Specification
358
IS 14781 : 2000 Sodium thiosulphate - Specification
2025
Product Specification
359
IS 14784 : 2000 Fireworks signal flares - Specification
2021
Product Specification
360
IS 14816 : 2000 Leather - Method of tests for ECO criteria
2022
Methods of tests
361
IS 14837 : 2000 Laboratoryware - Silica crucibles - Specification
2022
Product Specification
362
IS 14838 : 2000 Laboratoryware - Plastics wash bottles - Specification
2022
Product Specification
363
IS 14868 : 2012 Laboratory glassware - Interchangeable spherical ground glass joints (First Revision)
2022
Product Specification
364
IS 14898 : 2001 Eco criteria for finished leather - Specification
2020
Product Specification
365
IS 14915 : 2001 Filter paper, qualitative, hand - Made - Specification
2022
Product Specification
366
IS 14925 : 2001 Epoxy resin for paints - Specification
2022
Product Specification
367
IS 14931 : 2001 Fireworks wheel - Specification
2021
Product Specification
368
IS 14932 : 2001 Sulfamic acid - Specification
2022
Product Specification
369
IS 14946 : 2001 Zinc ethyl silicate primer, two components - Specification
2022
Product Specification
370
IS 14947 : 2001 Enamel synthetic, oil resistant, air drying - Specification
2022
Product Specification
371
IS 14948 : 2001 Paint coal tar epoxy, two pack, black and brown (Base and Hardner) - Specification
2022
Product Specification
372
IS 14969 : 2001 Leather - Upper leather made from splits - Method of identification
2022
Methods of tests
373
IS 14970 : 2001 Leather - Lastometer grain crack test - Methods of test
2022
Methods of tests
374
IS 14984 : 2001 1,3 - Butadiene - Code of Safety
2023
Code of Practice
375
IS 14985 : 2001 Methyl Acrylate and Ethyl Acrylate - Code of Safety
2023
Code of Practice
376
IS 15 : 1973 Specification for seedlac (Second Revision)
2023
Product Specification
377
IS 150 : 1950 Specification for ready mixed paint, brushing, finishing, stoving, enamel, colour as required
2020
Product Specification
378
IS 15072 : 2002 Sodium alpha olefin sulphonate for cosmetic, detergent and other industrial use - Specification
2024
Product Specification
379
IS 15073 : Part 1 : 2002 Packaging of electric detonators - Specification: Part 1 wooden cases
2023
Product Specification
380
IS 15073 : Part 2 : 2008 Packaging of electric detonator: Part 2 corrugated fibreboard cases
2023
Product Specification
381
IS 15074 : Part 1 : 2002 Packaging of non - Electric detonators - Specification: Part 1 wooden cases
2023
Product Specification
382
IS 151 : 2017 Ready mixed paint, spraying, finishing, stoving, enamel for general purposes, colour as required - Specification (Second Revision)
2022
Product Specification
383
IS 1514 : 1990 Methods of sampling and test for quicklime and hydrated lime (First Revision)
2024
Methods of tests
384
IS 15196 : 2002 Plastic footwear lasts - Specification
2023
Product Specification
385
IS 15206 : 2002 Work - Place air - Determination of mass concentration of carbon monoxide - Method using detector tubes for short term sampling with direct indication
2024
Methods of tests
386
IS 15207 : 2002 Workplace air - Determination of vaporous chlorinated hydrocarbons - Charcol tube/solvent desorption/gas chromatographic method
2023
Methods of tests
387
IS 15209 : 2002 Work - Place air - Determination of mass concentration of nitrogen dioxide - Method using detector tubes for shortterm sampling with direct indication
2024
Methods of tests
388
IS 15211 : 2002 Workplace air - Determination of vaporous aromatic hydrocarbons - Charcoal tube/solvent resorption/gas chromatographic method
2023
Methods of tests
389
IS 15251 : 2002 Lasts for heavy duty shoes - Specification
2023
Product Specification
390
IS 15267 : 2003 Zeolite detergent grade - Specification
2024
Product Specification
391
IS 15298 : Part 2 : 2016 Personal protective equipment: Part 2 safety footwear (Second Revision)
2022
Product Specification
392
IS 15298 : Part 3 : 2019 Personal protective equipment: Part 3 protective footwear (Second Revision)
2023
Product Specification
393
IS 15298 : Part 5 : 2004 Safety, protective and occupational footwear for professional use: Part 5 additional requirements and test methods
2021
Product Specification
394
IS 15298 : Part 6 : 2004 Safety, protective and occupational footwear for professional use: Part 6 additional specifications for safety footwear
2021
Product Specification
395
IS 15298 : Part 7 : 2004 Safety, protective and occupational footwear for professional use: Part 7 additional specifications for protective footwear
2021
Product Specification
396
IS 15298 : Part 8 : 2004 Safety, protective and occupational footwear for professional use: Part 8 additional specification for occupational footwear
2021
Product Specification
397
IS 15302 : 2003 Determination of Aluminum and Barium in Water By Direct Nitrous Oxide - Acetylene Flame Atomic Absorption Spectrometry
2023
Methods of tests
398
IS 15303 : 2003 Determination of Antimony, Iron and Selenium in Water By Electrothermal Atomic Absorption Spectrometric Method
2023
Methods of tests
399
IS 15304 : 2003 Dipotassium hydrogen phosphate for electroplating - Specification
2024
Product Specification
400
IS 15307 : 2003 Post card - Specification
2024
Product Specification
401
IS 15322 : 2003 Particle Filters used in Respiratory Protective Equipment - Specification
2019
Product Specification
402
IS 15323 : 2003 Gas Filters and Combined Filters used in Respiratory Protective Equipment - Specification
2019
Product Specification
403
IS 15365 : 2019 Amino resins for paints (First Revision)
2024
Product Specification
404
IS 15366 : 2003 Dolomite for paint industry - Specification
2024
Product Specification
405
IS 1540 : Part 1 : 1980 Specification for quick lime and hydrated lime for chemical industries: Part 1 quick lime (Second Revision)
2024
Product Specification
406
IS 1540 : Part 2 : 1990 Quicklime and hydrated lime for chemical industries - Specification: Part 2 hydrated lime (Third Revision)
2024
Product Specification
407
IS 15402 : 2003 Ceramic fibre blanket insulation - Specification
2024
Product Specification
408
IS 1541 : 2006 Glass filter funnels - Specification (Second Revision)
2021
Product Specification
409
IS 15447 : Part 1 : 2004 Commercial blasting explosives - Specification: Part 1 nitroglycerine based explosives
2021
Product Specification
410
IS 15447 : Part 2 : 2008 Commercial blasting explosives: Part 2 slurry/emulsion explosives - Specification
2023
Product Specification
411
IS 15465 : 2015 Gases and Gas Mixtures - Determination of Fire Potential and Oxidizing Ability for the Selection of Cylinder Valve Outlets (First Revision)
2021
Methods of tests
412
IS 15495 : 2020 Printing Ink for Food Packaging — Code of Practice ( First Revision )
2024
Code of Practice
413
IS 1551 : 1991 Carbon papers - Typewriters - Specification (Second Revision)
2025
Product Specification
414
IS 15520 : 2004 Graphic technology - Paints and printing inks - Assessment of light fastness using filtered xenon arc light
2024
Methods of tests
415
IS 15522 : 2004 Graphic technology - Determination of theological properties of paste inks and vehicles by the falling rod viscometer
2024
Methods of tests
416
IS 15556 : 2005 Volumetric and spectrophotometric estimation of iron
2022
Methods of tests
417
IS 15557 : 2005 Methods for preparation of buffer solutions and methods for determination of pH
2022
Others
418
IS 15573 : 2018 Polyaluminium Chloride (First Revision)
2023
Product Specification
419
IS 15578 : 2005 Code of Practice for Handling and Usage of Gas Mixtures
2021
Code of Practice
420
IS 15583 : 2005 Compressed Helium Gas - Specification
2021
Product Specification
421
IS 15656 : 2006 Hazard Identification and Risk Analysis - Code of Practice
2023
Code of Practice
422
IS 15738 : 2007 Stable Bleaching Powder - Code of Safety
2023
Code of Practice
423
IS 1574 : 1980 Specification for glass weighing bottles (First Revision)
2022
Product Specification
424
IS 1575 : 2003 Laboratory glassware - Separating funnels and dropping funnels (Second Revision)
2022
Product Specification
425
IS 15752 : 2007 Sericite for ceramic industry - Specification
2017
Product Specification
426
IS 15776 : 2008 Polyurethane (Pu) coated leather - Specification
2024
Product Specification
427
IS 15779 : 2007 Metal complex syntans - Specification
2022
Product Specification
428
IS 15793 : 2007 Managing Environment, Occupational Health and Safety Legal Compliance - Requirements of Good Practices
2023
Code of Practice
429
IS 158 : 2015 Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)
2020
Product Specification
430
IS 15803 : 2008 Respiratory Protective Devices - Self Contained Closed Circuit Breathing Apparatus Chemical Oxygen (KO2) Type, Self Generating, Self Rescuers - Specification
2023
Product Specification
431
IS 15810 : 2008 Lithium pentaborate - Specification
2023
Product Specification
432
IS 15837 : 2009 Anhydrous diboron trioxide - Specification
2024
Product Specification
433
IS 15850 : 2009 Nuclear grade boron carbide - Specification
2024
Product Specification
434
IS 15854 : 2009 Nuclear grade ion-exchange resins - Specification
2024
Product Specification
435
IS 1590 : 2018 Laboratory glassware - Glass filter flasks - Specification (Second Revision)
2023
Product Specification
436
IS 16 : Part 1 : 2008 Shellac - Specification: Part 1 hand-made shellac (Fourth Revision)
2023
Product Specification
437
IS 16 : Part 2 : 2008 Shellac - Specification: Part 2 machine-Made shellac (Fourth Revision)
2023
Product Specification
438
IS 1612 : 1976 Specification for iron powder (Reduction Grade) (First Revision)
2024
Product Specification
439
IS 16142 : 2019 Gas Analysis - Handling of Calibration Gases and Gas Mixtures - Guidelines (First Revision)
2024
Others
440
IS 16152 : 2014 Surface active agents - Detergents for domestic machine dishwashing - Guide for comparative testing of performance
2024
Methods of tests
441
IS 16153 : 2017 Analysis of soaps - Determination of total free alkali
2022
Methods of tests
442
IS 16203 : 2016 Prefabricated polyurethane sandwich panels - Specification
2021
Product Specification
443
IS 1622 : 1981 Methods of sampling and microbiological examination or water (First Revision)
2019
Methods of tests
444
IS 16247 : 2019 Gas Analysis - Contents of Certificates for Calibration Gas Mixtures (First Revision)
2024
Others
445
IS 16249 : Part 2 : 2019 Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Methods: Part 2 Piston Pumps (First Revision)
2024
Others
446
IS 16249 : Part 6 : 2019 Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Methods: Part 6 Critical Flow Orifices (First Revision)
2024
Others
447
IS 16249 : Part 7 : 2020 Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Methods Part 7 Thermal Mass-Flow Controllers (First Revision)
2024
Others
448
IS 16252 : 2014 Gas Analysis - Conversion of Gas Mixture Composition Data
2020
Others
449
IS 16253 : 2016 Hydrogen Detection Apparatus - Stationary Applications
2021
Product Specification
450
IS 16257 : 2014 Leather - Physical and mechanical tests - Measurement of stitch tear resistance
2024
Methods of tests
451
IS 16259 : 2014 Leather - Chemical tests - Determination of chromium (VI) content
2019
Methods of tests
452
IS 16260 : 2019 Gas Analysis Preparation of Calibration Gas Mixtures Gravimetric Method for Class 1 Mixtures (First Revision)
2024
Others
453
IS 16264 : 2014 Gas Analysis - Comparison Methods for Determining and Checking the Composition of Calibration Gas Mixtures
2020
Others
454
IS 16296 : Part 2 : 2014 Leather - Chemical determination of chromic oxide content: Part 2 quantification by colorimetric determination
2024
Methods of tests
455
IS 16297 : Part 1 : 2014 Leather - Chemical determination of formaldehyde content: Part 1 method using high performance liquid chromatography
2024
Methods of tests
456
IS 16297 : Part 3 : 2018 Leather — Chemical Determination of Formaldehyde Content Part 3 Determination of Formaldehyde Emissions from Leather
2023
Methods of tests
457
IS 16361 : 2015 Thermoplastic polymer based coatings: (A) undercoating (B) finishing - Specification
2020
Product Specification
458
IS 1638 : 1969 Specification for sizes and fitting of footwear (First Revision)
2021
Dimensions
459
IS 1639 : 1960 Specification for east india tanned kips and skins
2024
Product Specification
460
IS 16508 : 2017 Swimming pool for public - Code of safety
2022
Code of Practice
461
IS 16509 : 2020 Hydrogen Generators Using Water Electrolysis - Industrial, Commercial and Residential Applications (First Revision)
2025
Product Specification
462
IS 16512 : Part 1 : 2016 Hydrogen Generators Using Fuel Processing Technologies: Part 1 Safety
2021
Safety Standard
463
IS 16581 : 2018 High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packing of solid ammonium nitrate for explosives - Specification
2023
Product Specification
464
IS 1662 : 1974 Specification for glass liquor bottles (Second Revision)
2019
Product Specification
465
IS 16645 : 2018 Moulded Plastics Footwear — Lined or Unlined Polyurethane Boots for General Industrial use — Specification
2023
Product Specification
466
IS 16689 : 2018 Nuclear power plants - Reliability data exchange - General guidelines
2023
Code of Practice
467
IS 16691 : 2018 Nuclear power plants - Maintainability - Terminology
2023
Terminology
468
IS 16692 : 2018 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities
2023
Methods of tests
469
IS 16717 : 2018 Chaplis, frontier pattern, for general purposes - Specification
2023
Code of Practice
470
IS 16749 : 2018 Basic Considerations for the Safety of Hydrogen Systems
2024
Safety Standard
471
IS 16829 : 2018 Soaps and Detergents - Determination of Chelating Agent Content - Titrimetric Method
2023
Methods of tests
472
IS 16830 : 2018 Surface - Active Agents and Detergents - Determination of Water Content - Kari Fischer Methods
2023
Methods of tests
473
IS 16831 : 2018 Surface Active Agents - Determination of Polyethylene Glycol Content in Nonionic Ethoxylated Surfactants - HPLC Method
2023
Methods of tests
474
IS 16878 : 2018 Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 ke 5
2023
Methods of tests
475
IS 16879 : 2018 Practice for dosimetry in a gamma facility for radiation processing
2023
Methods of tests
476
IS 16880 : 2018 Practice for dosimetry in electron beam and X-ray (Bremsstrahlung) irradiation facilities for food processing
2023
Methods of tests
477
IS 16884 : 2018 Radiation protection - Apparatus for industrial gamma radiography - Specifications for performance, design and tests
2023
Product Specification
478
IS 16885 : 2018 Basic ionizing radiation symbol
2023
Safety Standard
479
IS 16896 : Part 1 : 2018 Surface active agents - Determination of chloroacetic acid (Chloroacetate) in surfactants: Part 1 HPLC method
2023
Methods of tests
480
IS 16896 : Part 2 : 2018 Surface active agents - Determination of chloroacetic acid (Chloroacetate) in surfactants: Part 2 ionic chromatographic method
2023
Methods of tests
481
IS 1691 : Part 3 : 2018 Methods of Micro-Biological, Colour Fastness and Microscopical Tests for Leather Part 3 Colour Fastness to Machine Washing ( First Revision )
2023
Methods of tests
482
IS 16914 : Part 1 : 2018 Textile — Dyestuffs Part 1 General Principles of Testing Coloured Textiles for Dyestuff Identification
2023
Methods of tests
483
IS 16914 : Part 2 : 2018 Textiles — Dyestuffs Part 2 General Method for the Determination of Extractable Dyestuffs including Allergenic and Carcinogenic Dyestuffs ( Method using Pyridine-Water )
2023
Methods of tests
484
IS 16914 : Part 3 : 2018 Textiles - Dyestuffs Part 3 Method for Determination of Certain Carcinogenic Dyestuffs ( Method using Triethylamine / Methanol )
2023
Methods of tests
485
IS 16922 : 2018 Protective Gaiters — Specification
2023
Product Specification
486
IS 16942 : 2018 Silicone soya alkyd exterior paint - Specification
2023
Product Specification
487
IS 16945 : 2018 Fire resistance test for glass walls
2024
Methods of tests
488
IS 16947 : 2018 Fire resistance tests for doors with glass panes, openable glass windows and sliding glass doors
2024
Methods of tests
489
IS 16978 : Part 2 : 2018 Glass in building - Forced - Entry security glazing: Part 2 test and classification by repetitive impact of a hammer and axe at room temperature
2024
Methods of tests
490
IS 16978 : Part 3 : 2018 Glass in Building - Forced-Entry Security Glazing Part 3 test and Classification by Manual Attack
2024
Methods of tests
491
IS 16978 : Part 4 : 2018 Glass in building - Forced - Entry security glazing: Part 4 test and classification by pendulum impact under thermally and fire stressed conditions
2024
Methods of tests
492
IS 16981 : 2018 Footwear — Critical Substances Potentially Present in Footwear and Footwear Components — Determination of Organotin Compounds in Footwear Materials
2023
Methods of tests
493
IS 16982 : 2018 Heat strengthened glass - Specification
2024
Product Specification
494
IS 16985 : 2018 Duplex board/coated duplex board - Specification
2023
Product Specification
495
IS 16986 : 2020 Practice for Calibration of Routine Dosimetry Systems for Radiation Processing
2025
Methods of tests
496
IS 16991 : 2018 Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethyl fumarate (Dmfu) in footwear materials
2023
Methods of tests
497
IS 16994 : 2018 Footwear for Men and Women for Municipal Scavenging Work
2023
Product Specification
498
IS 16995 : 2018 Nuclear energy - Reference beta-particle radiation - Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence
2023
Methods of tests
499
IS 17 : 1973 Specification for bleached lac (Second Revision)
2023
Product Specification
500
IS 17004 : 2018 Testing methods for processed glass
2024
Methods of tests
501
IS 17011 : 2018 Chemical requirements for footwear and footwear materials
2023
System Standard
502
IS 17012 : 2018 High ankle tactical boots with pu - Rubber sole - Specification
2023
Product Specification
503
IS 17037 : 2018 Anti riot shoes - Specification
2023
Product Specification
504
IS 17044 : 2018 Intumescent fire retardant paint (Water Based) - Specification
2023
505
IS 17054 : Part 1 : 2019 Surface active agents - Detergents - Determination of cationic - Active matter content: Part 1 high - Molecular - Mass cationic - Active matter
2024
Methods of tests
506
IS 17054 : Part 2 : 2019 Surface active agents - Detergents - Determination of cationic - Active matter content: Part 2 cationic - Active matter of low molecular mass (Between 200 And 500)
2024
Methods of tests
507
IS 17060 : 2018 Practice for blood irradiation dosimetry
2023
Methods of tests
508
IS 17062 : 2019 Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing
2024
Methods of tests
509
IS 17078 : 2019 Laboratory glassware - Disposable micropipettes
2023
Product Specification
510
IS 17094 : Part 2 : 2019 Piston - Operated volumetric apparatus: Part 2 piston pipettes
2023
Product Specification
511
IS 17098 : 2019 Footwear - Test methods for accessories: metallic accessories - Corrosion resistance
2024
Methods of tests
512
IS 17118 : Part 26 : 2019 Methods for measurement of indoor air: Part 26 sampling strategy for carbon dioxide (CO2)
2024
Methods of tests
513
IS 17133 : 2019 Sampling from Stationary Sources for Automated Determination of Gas Emission Concentration Using Permanently Installed Monitoring Systems
2024
Code of Practice
514
IS 17148 : Part 2 : 2019 Performance Characteristics of Automated Measurement Systems Part 2 Particulate Matter from Stationary Sources
2024
Product Specification
515
IS 17218 : 2019 Solar Thermo-Reflective Exterior Coating for Cooling of Roof Top
2024
Product Specification
516
IS 17268 : Part 1 : 2019 Method of Tests for Soap Part 1 Determination of Chloride Content — Potentiometric Method
2023
Methods of tests
517
IS 17274 : Part 2 : 2019 Respiratory Protective Devices — Methods of Test and Test Equipment Part 2 Determination of Breathing Resistance
2024
Methods of tests
518
IS 17274 : Part 3 : 2019 Respiratory Protective Devices - Methods of Test and Test Equipment : Part 3 Determination of Particle Filter Penetration
2024
Methods of tests
519
IS 17274 : Part 5 : 2019 Respiratory Protective Devices - Methods of test and test equipment : Part 5 Breathing machine, metabolic simulator, RPD head forms and torso, tools and verification tools
2024
Methods of tests
520
IS 17274 : Part 8 : 2019 Respiratory Protective Devices — Methods of Test and Test Equipment : Part 8 Measurement of RPD Air Flow Rates of Assisted Filtering RPD
2024
Methods of tests
521
IS 17274 : Part 9 : 2019 Respiratory Protective Devices - Methods of Test and Test Equipment : Part 9 Determination of Carbon Dioxide Content of the Inhaled Gas
2024
Methods of tests
522
IS 17274 : Part 10 : 2019 Respiratory Protective Devices - Methods of Test and Test Equipment : Part 10 Resistance to Ignition, Flame, Radiant Heat and Heat
2024
Methods of tests
523
IS 17274 : Part 11 : 2019 Respiratory Protective Devices - Methods of Test and Test Equipment : Part 11 Determination of Field of Vision
2024
Methods of tests
524
IS 17274 : Part 12 : 2019 Respiratory Protective Devices - Methods of Test and test Equipment : Part 12 Determination of Volume-Averaged Work of Breathing and Peak Respiratory Pressures
2024
Methods of tests
525
IS 17274 : Part 13 : 2019 Respiratory Protective Devices - Methods of Test and Test Equipment : Part 13 RPD Using Regenerated Breathable Gas and Special Application Mining Escape RPD: Consolidated Test for Gas Concentration, Temperature, Humidity, Work of Breathing, Breathing Resistance, Elastance and Duration
2024
Methods of tests
526
IS 17294 : 2019 Dyestuffs - Determination of solubility in organic solvents gravimetric and photometric methods
2024
Methods of tests
527
IS 17317 : 2019 Gradation of Post-Consumer ( Recycled ) Paper
2024
Product Specification
528
IS 17326 : 2020 Surface Active Agents — Detergents — Determination of Anionic-Active Matter Hydrolysable and Non-Hydrolysable Under Acid Conditions
2025
Methods of tests
529
IS 17327 : 2020 Surface Active Agents — Determination of Free Propylene Oxide Content in Propylene Oxide Adduct Surfactants — GC Method
2025
Methods of tests
530
IS 17328 : Part 3 : 2021 Nuclear fuel technology - Determination of uranium : Part 3 Determination of uranium in uranyl nitrate solutions of nuclear grade quality - Gravimetric method
2026
Product Specification
531
IS 17328 : Part 4 : 2021 Nuclear fuel technology - Determination of uranium : Part 4 Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry
2026
Product Specification
532
IS 17330 : 2021 Characterization principles for soils buildings and infrastructures contaminated by radionuclides for remediation purposes
2026
Methods of tests
533
IS 17346 : 2020 Insulating Glazing Unit — Specification
2025
Product Specification
534
IS 17384 : 2020 Pigments, dyestuffs and extenders - Terminology - general terms
2025
Terminology
535
IS 17394 : 2020 Selection of Chemical Coagulant and Disinfectant in a Water Treatment Plant — Guidelines
2025
Code of Practice
536
IS 17403 : 2020 Magnalium for Explosives and Pyrotechnic Composition — Specification
2025
Product Specification
537
IS 17439 : 2020 Polyphosphoric Acid - Specification
2024
Product Specification
538
IS 17440 : 2020 Carbon Black - Specification
2024
Product Specification
539
IS 17441 : 2020 Calcined Alumina - Specification
2024
Product Specification
540
IS 17443 : 2020 Tabular Alumina - Specification
2024
Product Specification
541
IS 17444 : 2020 Cobalt Acetate - Specification
2024
Product Specification
542
IS 1746 : 1992 Shoe polish, paste - Specification (Third Revision)
2022
Product Specification
543
IS 17502 : 2020 Methylene Blue Index of Clay - Method of Test
2025
Methods of tests
544
IS 17614 : 2021 Water quality Sampling Part 21 Guidance on Sampling of Drinking Water distributed by tankers or means other than distribution pipes
2026
Methods of tests
545
IS 17614 : Part 4 : 2021 WATER QUALITY - SAMPLING Part 4 Guidance on sampling from natural and manmade lakes
2026
Service Specification
546
IS 17614 : Part 5 : 2021 WATER QUALITY - SAMPLING Part 5 Guidance on sampling of drinking water from treatment works and piped distribution systems
2026
Methods of tests
547
IS 17614 : Part 6 : 2021 WATER QUALITY - SAMPLING Part 6 Guidance on sampling of rivers and streams
2026
Methods of tests
548
IS 17614 : Part 7 : 2021 WATER QUALITY - SAMPLING Part 7 Guidance on sampling of water and steam in boiler plants
2026
Safety Standard
549
IS 17614 : Part 8 : 2021 WATER QUALITY - SAMPLING Part 8 Guidance on the sampling of wet deposition
2026
Product Specification
550
IS 17614 : Part 9 : 2021 WATER QUALITY - SAMPLING Part 9 Guidance on sampling from marine waters
2026
Code of Practice
551
IS 17614 : Part 10 : 2021 WATER QUALITY - SAMPLING Part 10 Guidance on sampling of waste waters
2026
Product Specification
552
IS 17614 : Part 13 : 2021 Water quality Sampling Part 13: Guidance on sampling of sludges
2026
Product Specification
553
IS 17614 : Part 14 : 2021 Water Quality Sampling Part 14: Guidance on Quality Assurance and Quality Control of Environmental Water Sampling and Handling
2026
Product Specification
554
IS 17614 : Part 15 : 2021 Water quality -Sampling- Part 15 Guidance on the preservation and handling of sludge and sediment samples
2026
Code of Practice
555
IS 17614 : Part 16 : 2021 Water Quality Sampling Part 16 Guidance on Biotesting of Samples
2026
Product Specification
556
IS 17614 : Part 19 : 2021 Water Quality Sampling Part 19 Guidance on Sampling of Marine Sediments
2026
Others
557
IS 17614 : Part 20 : 2021 Water Quality Sampling Part 20 Guidance on the Use of Sampling Data for Decision Making Compliance with Thresholds and Classification Systems
2026
Product Specification
558
IS 17614 : Part 22 : 2021 Water Quality Sampling Part 22 Guidance on the Design and Installation of Groundwater Monitoring Points
2026
Methods of tests
559
IS 17614 : Part 23 : 2021 Water Quality Sampling Part 23 Guidance on Passive Sampling in Surface Waters
2026
Methods of tests
560
IS 17614 : Part 24 : 2021 Water Quality Sampling Part 24: Guidance on the Auditing of Water Quality sampling
2026
Product Specification
561
IS 1775 : 1981 Specification for base paper for sensitized paper (First Revision)
2024
Product Specification
562
IS 17752 : 2021 Testing and Evaluation of Chemical Warfare Agent Detectors — Code of Practice
2026
Product Specification
563
IS 18001 : 2007 Occupational Health and Safety Management Systems - Requirements with Guidance for Use (First Revision)
2023
System Standard
564
IS 1844 : 1993 Bristles - Specification (Second Revision)
2023
Product Specification
565
IS 1848 : Part 1 : 2018 Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision)
2023
Product Specification
566
IS 1848 : Part 2 : 2018 Writing and printing papers - Specification: Part 2 air mail/manifold, cartridge drawing and cartridge white, duplicating absorbent and duplicating semi - Absorbent and poster machine glazed types (Fifth Revision)
2023
Product Specification
567
IS 1872 : 2020 Thinner for synthetic paints and varnishes for aircrafts - Specification ( First Revision )
2025
Product Specification
568
IS 1873 : 2019 Antichill thinner for cellulose nitrate based paints, dopes and lacquers for aircrafts - Specification (First Revision)
2024
Product Specification
569
IS 1874 : 2018 Ready mixed paint, universal, zinc chrome, priming (Synthetic) for light alloys - Specification (Second Revision)
2024
570
IS 1880 : 1977 Specification for zinc oxide and zinc salts for electroplating (First Revision)
2024
Product Specification
571
IS 1945 : 1986 Specification for glass bottles for fluid ink (First Revision)
2022
Product Specification
572
IS 1961 : 1968 Specification for glass tableware (First Revision)
2019
Product Specification
573
IS 1975 : 1984 Specification for signal roundels and lenses for use in railways (First Revision)
2022
Product Specification
574
IS 1989 : Part 1 : 1986 Specification for leather safety boots and shoes: Part 1 for miners (Fourth Revision)
2021
Product Specification
575
IS 1989 : Part 2 : 1986 Specification for leather safety boots and shoes: Part 2 for heavy metal industries (Fourth Revision)
2021
Product Specification
576
IS 1996 : 2003 Laboratory glassware - Straight - Bore glass stopcocks for general purposes (First Revision)
2022
Product Specification
577
IS 1997 : 2008 Laboratory glassware - Burettes (Third Revision)
2022
Product Specification
578
IS 2012 : 2006 Red phosphorus - Specification (First Revision)
2021
Product Specification
579
IS 2050 : 1991 Glossary of terms relating to footwear (First Revision)
2021
Methods of tests
580
IS 2051 : 1976 Method for sampling of leather footwear (First Reuision)
2021
Methods of tests
581
IS 2075 : 2017 Ready mixed paint, stoving, red oxide zinc chrome, priming - Specification (Third Revision)
2022
Product Specification
582
IS 2091 : 1983 Specification for multi - Trip glass beer bottles (Second Revision)
2023
Product Specification
583
IS 2105 : 1994 Letterpress ink, black, general purpose - Specification (Second Revision)
2021
Product Specification
584
IS 2124 : 2000 Sodium bicarbonate - Specification (Second Revision)
2021
Product Specification
585
IS 220 : 1988 Fountain pen ink - Ferro - Gallo tannate (0.1 Percent Iron Content) specification (Third Revision)
2025
Product Specification
586
IS 2214 : 1977 Specification for silver nitrate, pure and analytical reagent (First Revision)
2024
Product Specification
587
IS 2263 : 1979 Methods of preparation of indicator solutions (First Revision)
2024
Others
588
IS 2303 : Part 2 : 2018 Grading glass for alkalinity: Part 2 hydrolytic resistance of glass containers - Determination by titration method and classification (Second Revision)
2023
Methods of tests
589
IS 2303 : Part 3 : 2018 Grading glass for alkalinity: Part 3 hydrolytic resistance of glass containers - Determination by flame spectrometry and classification
2023
Methods of tests
590
IS 2307 : 2004 Magnesium powder for explosive and pyrotechnic compositions - Specification (Second Revision)
2021
Product Specification
591
IS 2316 : 1990 Methods of preparation of standard solutions for colorimetric and volumetric analysis (Second Revision)
2022
Others
592
IS 2317 : 1975 Method for gravimetric determination of sulphates (First Revision)
2024
Methods of tests
593
IS 2318 : 1980 Specification for silver nitrate, photographic grade (Second Revision)
2024
Product Specification
594
IS 2339 : 2013 Aluminium paints for general purposes - Specification (First Revision)
2023
Product Specification
595
IS 2351 : 1988 Specification for marble stoppered aerated water glass bottles (First Revision)
2023
Product Specification
596
IS 2362 : 1993 Determination of water by karl fischer method - Test method (Second Revision)
2024
Others
597
IS/ISO 24450 : 2005 Laboratory glassware - Wide - Necked boiling flasks
2022
Product Specification
598
IS/ISO 2470 : Part 2 : 2008 Paper, board and pulps - Measurement of diffuse blue reflectance factor: Part 2 outdoor daylight conditions (D65 Brightness)
2022
Methods of tests
599
IS/ISO 2471 : 2008 Paper and board - Determination of opacity (Paper Backing) - Diffuse reflectance method
2022
Methods of tests
600
IS/ISO 24998 : 2008 Plastics laboratory ware - Single - Use petri dishes for microbiological procedures
2022
Product Specification
601
IS 252 : 2013 Caustic soda - Specification (Fourth Revision)
2023
Product Specification
602
IS 2553 : Part 1 : 2018 Safety glass - Specification: Part 1 architectural, building and general uses (Fourth Revision)
2024
Product Specification
603
IS 2617 : 2006 Millboard, greyboard and strawboard - Specification (Second Revision)
2022
Product Specification
604
IS 2618 : 2016 Laboratory glassware - Test tubes (Third Revision)
2021
Product Specification
605
IS 2619 : 2018 Glass beakers - Specification (Third Revision)
2023
Product Specification
606
IS 2620 : 1963 Specification for distilling flasks
2023
Product Specification
607
IS 2626 : 2015 Laboratory glassware - Petri dishes (Second Revision)
2024
Product Specification
608
IS 2627 : 1979 Glossary of terms relating to liquid - In - Glass thermometers (First Revision)
2022
Terminology
609
IS 264 : 2005 Nitric acid - Specification (Third Revision)
2022
Product Specification
610
IS 265 : 2021 HYDROCHLORIC ACID SPECIFICATION Fifth Revision
2025
Product Specification
611
IS 2653 : 2004 Safety matches in boxes - Specification (Third Revision)
2021
Product Specification
612
IS 2694 : 2018 School chalks, moulded, white ? specification (First Revision)
2022
Product Specification
613
IS 2701 : 1986 Specification for brush, carriage washing (Without Handle) (Second Revision)
2021
Product Specification
614
IS 2716 : 2013 Myrobalan extract - Specification (Second Revision)
2024
Product Specification
615
IS 2724 : 2017 Quality Tolerances for Water for Pulp and Paper Industry (First Revision)
2022
Product Specification
616
IS 2781 : 2020 Glossary of Terms Relating to Ceramicware ( Third Revision )
2025
Terminology
617
IS/ISO 2822 : PART 1 : 1998 Raw cattle hides and calf skins: Part 1 descriptions of defects
2022
Code of Practice
618
IS 2835 : 1987 Specification for flat transparent sheet glass (Third Revision)
2023
Product Specification
619
IS 2836 : 1974 Methods of test and quality requirements for 9 porcelain laboratory apparatus (First Revision)
2022
Methods of tests
620
IS 2837 : Part 1 : 1975 Specification for porcelain crucibles and basins: Part 1 crucibles (First Revision)
2023
Product Specification
621
IS 2837 : Part 2 : 1977 Specification for porcelain crucibles and basins: Part 2 basins (First Revision)
2022
Product Specification
622
IS 2857 : 2002 Earthenware crockeryware - Specification (Third Revision)
2018
Product Specification
623
IS 2859 : 1977 Code of Practice for Treatment of Water for Locomotive Boilers (First Revision)
2024
Code of Practice
624
IS 2887 : 2017 Laundry soap powders/flakes - Specification (Third Revision)
2022
Product Specification
625
IS 2933 : Part 1 : 2013 Enamel, exterior: (A) undercoating (B) finishing - Specification: Part 1 for domestic and decorative applications (Second Revision)
2023
Product Specification
626
IS 2954 : 1978 Specification for vegetable tanned leather for belting (First Revision)
2022
Product Specification
627
IS 2960 : 1964 Specification for bookbinding leather
2022
Product Specification
628
IS 2961 : 1973 Specification for chrome retan finished upper leather (First Revision)
2024
Product Specification
629
IS 299 : 2012 Alumino - Ferric - Specification (Fifth Revision)
2022
Product Specification
630
IS 3008 : 2012 Brushes, shoe blacking - Specification (Fourth Revision)
2021
Product Specification
631
IS 3009 : 2002 Brushes, shoe polishing - Specification (Third Revision)
2023
Product Specification
632
IS 301 : 1982 Specification for potassium nitrate for explosive and pyrotechnic compositions (Second Revision)
2021
Product Specification
633
IS 3025 : Part 2 : 2019 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater: Part 2 Determination of Selected Elements by Inductively Coupled Plasma Optical Emission Spectrometry (ICP - OES) (First Revision)
2023
Methods of tests
634
IS 3025 : Part 4 : 2021 METHODS OF SAMPLING AND TEST PHYSICAL AND CHEMICAL FOR WATER AND WASTE WATER PART 4 COLOUR Second Revision
2026
Others
635
IS 3025 : Part 5 : 2018 Methods of Sampling and Test (Physical and Chemical) for Water and Waste Water: Part 5 Odour (Second Revision)
2022
Methods of tests
636
IS 3025 : Part 6 : 2018 Methods of Sampling and Test (Physical and Chemical) for Water and Waste Water: Part 6 Odour Threshold (Second Revision)
2022
Methods of tests
637
IS 3025 : Part 7 : 2017 Methods of Sampling and Test (Physical And Chemical) for Water and Waste Water: Part 7 Taste Threshold (Second Revision)
2022
Methods of tests
638
IS 3025 : Part 14 : 2013 Methods of Sampling and Test (Physical and Chemical) for Water and Waste Water: Part 14 Specific Conductance (Wheatstone Bridge, Conductance Cell) (Second Revision)
2023
Methods of tests
639
IS 3025 : Part 19 : 2018 Methods of Sampling and Test (Physical and Chemical) for Water and Waste Water: Part 19 Settleable Matter (Second Revision)
2023
Methods of tests
640
IS 3025 : Part 21 : 2009 Methods of Sampling and Test (Physical and Chemical) for Water and Waste Water: Part 21 Hardness (Second Revision)
2023
Methods of tests
641
IS 3025 : Part 24 : Sec 2 : 2021 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater Part 24 Sulphates Section 2 Method by Continuous Flow Analysis
2026
Others
642
IS 3025 : Part 26 : 2021 Methods of Sampling and Test Physical and Chemical for Water and Wastewater Part 26 Chlorine Residual (Second Revision) of IS 3025Part 26
2026
Product Specification
643
IS 3025 : Part 27 : Sec 1 : 2021 Methods of Sampling and Test (Physical and Chemical) for Water and Waste Water Part 27 Cyanide Section 1 Titrimetic, Colorimetric and Ion-Selective Methods (Second Revision)
2026
Methods of tests
644
IS 3025 : Part 27 : Sec 3 : 2021 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater Part 27 Cyanides Section 3 Methods Using Continuous Flow Analysis (CFA)
2026
Methods of tests
645
IS 3025 : Part 33 : 2009 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater: Part 33 Iodide (Second Revision)
2024
Methods of tests
646
IS 3025 : Part 34 : Sec 2 : 2021 Methods of Sampling and Test (Phyical and Chemical) for Water and Wastewater Part 34 Nitrogen Section 2 Determination of Ammonium Nitrogen Method by Flow Analysis (CFA and FIA) and Spectrometric Detection
2026
Product Specification
647
IS 3025 : Part 34 : Sec 3 : 2021 Methods of Sampling and Test (Phyical and Chemical) for Water and Wastewater Part 34 Nitrogen Section 3 Determination of Nitrite Nitrogen and Nitrate Nitrogen and the Sum of Both by Flow Analysis (CFA and FIA) and Spectrometric and Detection
2026
Methods of tests
648
IS 3025 : Part 39 : 2021 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater Part 39 Oil and Grease ( Second Revision)
2026
Code of Practice
649
IS 3025 : Part 52 : 2003 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater: Part 52 Chromium (First Revision)
2023
Methods of tests
650
IS 3025 : Part 52 : Sec 2 : 2021 Methods of Sampling and Test Physical and Chemical for Water and Wastewater Part 52 Chromium Section 2 Method Using Flow Analysis (FIA and CFA) and Spectrometric Detection
2026
Product Specification
651
IS 3025 : Part 54 : 2003 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater: Part 54 Nickel (First Revision)
2023
Methods of tests
652
IS 3025 : Part 55 : 2003 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater: Part 55 Aluminium (First Revision)
2023
Methods of tests
653
IS 3025 : Part 56 : 2003 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater: Part 56 Selenium (First Revision)
2023
Methods of tests
654
IS 3025 : Part 57 : 2021 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater Part 57 Boron (Second Revision)
2026
Others
655
IS 3025 : Part 61 : 2008 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater: Part 61 Total and Free Carbon Dioxide (First Revision)
2023
Methods of tests
656
IS 3025 : Part 63 : 2007 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater: Part 63 Oxygen Absorbed in 4 h (First Revision)
2023
Methods of tests
657
IS 3025 : Part 67 : 2018 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater: Part 67 Determination of Dissolved Bromate - Method by Liquid Chromatography of Ions
2023
Methods of tests
658
IS 3025 : Part 68 : 2019 Methods of Sampling and Test ( Physical and Chemical ) for Water and Wastewater Part 68 Anionic Surfactants
2023
Methods of tests
659
IS 3025 : Part 69 : 2018 Methods of Sampling and Test (Physical and Chemical) for Water and Waste Water: Part 69 Total Organic Carbon and Dissolved Organic Carbon
2023
Methods of tests
660
IS 3025 : Part 70 : 2018 Methods of Sampling and Test (Physical and Chemical) for Water and Waste Water: Part 70 Adsorbable Organically Bound Halogens (AOX)
2023
Methods of tests
661
IS 3025 : Part 71 : 2021 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater Part 71 Determination of Dissolved Cations Using Ion Chromatography
2026
Code of Practice
662
IS 3025 : Part 73 : 2021 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater Part 73 Instrument Based Method for Determination of Total Organic Carbon (TOC), Dissolved Organic Carbon (DOC), Total Bound Nitrogen (TNb) and Dissolved Bound Nitrogen (DNb)
2026
Safety Standard
663
IS 3025 : Part 76 : 2021 Methods of Sampling and Test Physical and Chemical for Water and Wastewater Part 76 Determination of Borate - Spectrometric Method Using Azomethine-H
2026
Methods of tests
664
IS 3025 : Part 77 : 2021 Methods of Sampling and Test Physical and Chemical for Water and Wastewater Part 77 Determination of Soluble Silicates by Flow Analysis (FIA and CFA) and Photometric Detection
2026
Product Specification
665
IS 3025 : Part 78 : 2021 Methods of Sampling and Test Physical and Chemical for Water and Wastewater Part 78 Determination of the Methylene Blue Active Substances (MBAS) Index Method Using Continuous Flow Analysis (CFA)
2026
Methods of tests
666
IS 3064 : 2018 Hand - Made drawing paper - Specification (Second Revision)
2023
Product Specification
667
IS 3069 : 2020 Glossary of Terms, Symbols and Units Relating to Thermal Insulation Materials ( Second Revision )
2024
Terminology
668
IS 3104 : Part 1 : 1982 Specification for density hydrometers: Part 1 requirements (First Revision)
2023
Product Specification
669
IS 3104 : Part 2 : 1982 Specification for density hydrometers: Part 2 methods of test and use (First Revision)
2023
Methods of tests
670
IS 3149 : 1994 Enamelware for home use - Specification (Second Revision)
2025
Product Specification
671
IS 3263 : 1981 Specification for waxed paper for confectionery (First Revision)
2024
Product Specification
672
IS 33 : 1992 Inorganic pigments and extenders for paints - Methods of sampling and test (Third Revision)
2024
Methods of tests
673
IS 3302 : 1986 Specification for backing sheet for stencil (First Revision)
2024
Product Specification
674
IS 3328 : 1993 Quality Tolerances for Water for Swimming Pools (First Revision)
2024
Product Specification
675
IS 3346 : 1980 Method for the determination of thermal conductivity of thermal insulation materials (Two Slab, Guarded Hot - Plate Method) (First Revision)
2022
Methods of tests
676
IS 3387 : 2004 Toothbrush - Specification (Second Revision)
2023
Product Specification
677
IS 341 : 2016 Black japan, types a, b and c - Specification (Second Revision)
2021
Product Specification
678
IS 3413 : 2004 Base paper for carbon paper - Specification (Second Revision)
2019
Product Specification
679
IS 3432 : 1965 Specification for clay pipe triangles
2022
Product Specification
680
IS 348 : 1968 Specification for french polish (First Revision)
2019
Product Specification
681
IS 3493 : 1978 Methods of sampling and test for organic pigments for paints (First Revision)
2022
Methods of tests
682
IS 3505 : 2002 Porcelain crockeryware - Specification (Third Revision)
2018
Product Specification
683
IS 3526 : 1981 Specification for barium chromate for paints (First Revision)
2022
Product Specification
684
IS 3527 : 1972 Specification for mica for paints (First Revision)
2024
Product Specification
685
IS 3536 : 2016 Ready mixed paint, brushing, wood primer - Specification (Second Revision)
2021
Product Specification
686
IS 3537 : 2017 Ready mixed paint, finishing, interior, for general purposes, to indian standard colours - Specification (First Revision)
2022
Product Specification
687
IS 3539 : 1966 Specification for ready mixed paint, undercoating, for use under oil finishes, to indian standard colours, as required
2024
Product Specification
688
IS 356 : 1991 Ester gum - Specification (Second Revision)
2022
Product Specification
689
IS 3574 : Part 1 : 1965 Specification for organic pigments for paints: Part 1 Azo pigments (toluidine red, chlorinated p-nitroaniline red, arylamide yellow, and para red)
2024
Product Specification
690
IS 3574 : Part 2 : 2000 Organic pigments for paints - Specification: Part 2 phthalocyanines (First Revision)
2021
Product Specification
691
IS 3585 : 2018 Ready mixed paint, aluminium, brushing, priming, water resistant for woodwork - Specification (First Revision)
2023
Product Specification
692
IS 3605 : 1984 Specification for bauxite for chemicals and petroleum industries (First Revision)
2024
Product Specification
693
IS 3608 : Part 1 : 1987 Specification for glass alcoholometers: Part 1 glass alcoholometers without thermometer (First Revision)
2022
Product Specification
694
IS 3608 : Part 2 : 1987 Specification for glass alcoholometers: Part 2 glass alcoholometers with thermometer (Thermo - Alcoholometers) (First Revision)
2022
Product Specification
695
IS 3677 : 1985 Specification for unbonded rock and slag wool for thermal insulation (Second Revision)
2022
Product Specification
696
IS 3678 : 2016 Ready mixed paint, thick white, for lettering - Specification (First Revision)
2021
Product Specification
697
IS 3702 : 1989 Refills for vacuum flasks - Specification (Second Revision)
2019
Product Specification
698
IS 3709 : 1966 Specification for mastic cement for bedding of metal windows
2019
Product Specification
699
IS 3736 : 1995 Canvas boots, rubber sole - Specification (Second Revision)
2021
Product Specification
700
IS 384 : 2002 Brushes, paints and varnishes, flat - Specification (Fifth Revision)
2018
Product Specification
701
IS 3840 : 2011 Lining leather - Specification (Third Revision)
2022
Product Specification
702
IS 3936 : 1966 Specification for porcelain mortars and pestles
2022
Product Specification
703
IS 394 : 1985 Specification for ink, cloth marking (Second Revision)
2024
Product Specification
704
IS 3944 : 1982 Method for determination of flow time by use of flow cups (First Revision)
2015
Code of Practice
705
IS 3953 : 1966 Specification for high temperature combustion boats
2022
Product Specification
706
IS 3962 : 1967 SPECIFICATION FOR WAXED PAPER FOR GENERAL PACKAGING
2024
Product Specification
707
IS 3967 : 2013 Cutch - Specification (Second Revision)
2024
Product Specification
708
IS 3968 : 2013 Wattle bark - Specification (First Revision)
2024
Product Specification
709
IS 3969 : 2013 Goran bark - Specification (Second Revision)
2024
Product Specification
710
IS 3972 : Part 1 : 2020 Methods of Test for Vitreous Enamelware Part 1: Production of Specimens for Testing
2025
Code of Practice
711
IS 3972 : Part 2 : Sec 3 : 2020 Methods of Test for Vitreous Enamelware Part 2 Test Methods Section 3 Resistance to boiling acids, boiling liquids, alkaline liquids and their vapours ( Second Revision )
2025
Methods of tests
712
IS 3972 : Part 2 : Sec 4 : 2020 Methods of Test for Vitreous Enamelware Part 2 Test Methods Section 4 Resistance to thermal shock ( Second Revision )
2025
Methods of tests
713
IS 3972 : Part 2 : Sec 5 : 2020 Methods of Test for Vitreous Enamelware Part 2 Test Methods Section 5 Resistance to hot alkali ( Second Revision )
2025
Methods of tests
714
IS 3972 : Part 2 : Sec 6 : 1988 Methods of test for vitreous enamelware: Part 2 test methods: Sec 6 reflectance and specular gloss (First Revision)
2025
Methods of tests
715
IS 3972 : Part 2 : Sec 9 : 1991 Methods of test for vitreous enamelware: Part 2 test methods: Sec 9 resistance to dilute sulphuric acid (First Revision)
2025
Methods of tests
716
IS 3976 : 2018 Safety Rubber Canvas Boots for Miners - Specification ( Sixth Revision )
2023
Product Specification
717
IS 3982 : 1997 Sheepskin leather for orthopaedic linings - Specification (First Revision)
2024
Product Specification
718
IS 3985 : 1983 Specification for leather for rugby ball (First Revision)
2022
Product Specification
719
IS 3990 : 1967 Specification for combustion tubes
2022
Product Specification
720
IS 3999 : 2015 Casein based aqueous pigments and finishes - Specification (First Revision)
2020
Product Specification
721
IS 4016 : 2002 Density composition tables for aqueous solutions of sodium hydroxide - Specification (First Revision)
2022
Others
722
IS 4048 : 1989 Density - Composition tables for aqueous solutions of sulphuric acid - Specification (First Revision)
2021
Others
723
IS 4056 : 1966 Specification for fish oil for leather industry
2020
Product Specification
724
IS 4102 : 1983 Specification for leather for shuttlecock caps (First Revision)
2019
Product Specification
725
IS 411 : 2020 Titanium dioxide, anatase, for paints - Specification ( Fourth Revision )
2025
Product Specification
726
IS 4167 : 2020 Glossary of Terms Relating to Air Pollution ( Second Revision )
2024
Terminology
727
IS 4174 : 1977 Specification for typewriter ribbons, cotton (First Revision)
2024
Product Specification
728
IS 4175 : 2018 Correcting fluid - Specification (Second Revision)
2023
Product Specification
729
IS B4175 : 1981 Correcting Fluid (bi-lingual)
2024
Product Specification
730
IS 4191 : 1967 Specification for leather for volleyball
2024
Product Specification
731
IS 4199 : 2001 Toilet soap, liquid - Specification (Third Revision)
2024
Product Specification
732
IS B4199 : 2001 Toilet Soap, Liquid (bi-lingual)- Specification (Third Revision)
2016
Product Specification
733
IS 4200 : 2020 Sodium Aluminate — Specification ( Second Revision )
2024
Product Specification
734
IS 4207 : 1967 Specification for leather for football
2024
Product Specification
735
IS 4208 : 1985 Specification for brush, stencil (Second Revision)
2023
Product Specification
736
IS 4209 : 2013 Chemical laboratories - Code of safety (Second Revision)
2023
Code of Practice
737
IS 4214 : 1997 Brushes, boiler tube (Without Shank) - Specification (First Revision)
2023
Product Specification
738
IS 4222 : 2018 Coloured chalks, moulded ? Specification (First Revision)
2022
Product Specification
739
IS 423 : 1961 Specification for Plastic wood for joiners filler (Revised)
2019
Product Specification
740
IS 4261 : 2001 Glossary of terms relating to paper and pulp based packaging materials (First Revision)
2022
Terminology
741
IS 4263 : 1967 Code of Safety for Chlorine
2023
Code of Practice
742
IS 427 : 2013 Distemper, dry, colour as required - Specification (Third Revision)
2023
Product Specification
743
IS 428 : 2013 Washable distemper - Specification (Third Revision)
2023
Product Specification
744
IS 4285 : 1967 Method for volumetric determination of calcium
2024
Methods of tests
745
IS 430 : 1972 Specification for paint remover, solvent type, non - Flammable (Second Revision)
2024
Product Specification
746
IS 4301 : 1999 Brushes, foundry, flat - Specification (First Revision)
2023
Product Specification
747
IS 431 : 1972 Specification for paint remover, solvent type, flammable (Second Revision)
2024
Product Specification
748
IS 4312 : 1967 Code of Safety for Lead and its Compounds
2021
Code of Practice
749
IS 438 : 2006 Aluminium powder for explosives and pyrotechnic compositions - Specification (Second Revision)
2021
Product Specification
750
IS 4395 : 1987 Glossary of terms relating to inks and allied industry (First Revision)
2025
Terminology
751
IS 4396 : 1981 Specification for barium nitrate for explosive and pyrotechnic compositions (First Revision)
2021
Product Specification
752
IS/ISO 45001 : 2018 Occupational health and safety management systems - Requirements with guidance for use ( Second Revision )
2023
System Standard
753
IS 4512 : 1978 Specification for footwear lasts, wooden (First Revision)
2021
Product Specification
754
IS 4517 : 1986 Specification for brushes, welder's
2023
Product Specification
755
IS 4580 : 1986 Specification for brushes, shaving (First Revision)
2023
Product Specification
756
IS 4584 : 2002 Brushes, hair - Specification ( First Revision )
2023
Product Specification
757
IS 4610 : 1968 Specification for glass tubes for general purpose and reference thermometers
2022
Product Specification
758
IS 4658 : 2019 Specification for coated paper and board (Art And Chromo) (Second Revision)
2024
Product Specification
759
IS 4668 : 1985 Specification for ammonium nitrate for explosives (First Revision)
2021
Product Specification
760
IS 4671 : 2018 Expanded polystyrene for thermal insulation purposes
2023
Methods of tests
761
IS/ISO 4683 : PART 1 : 1998 Raw sheep skins: Part 1 descriptions of defects
2022
Code of Practice
762
IS/ISO 4683 : PART 2 : 1999 Raw sheep skins: Part 2 designation and presentation
2022
Code of Practice
763
IS 4700 : 1968 Quality Tolerances for Water for Fermentation Industry
2022
Product Specification
764
IS 4730 : 1994 Method for determination of density of liquids (First Revision)
2024
Others
765
IS 4737 : 1982 Specification for chromite for chemical industries (First Revision)
2025
Product Specification
766
IS 4779 : 1985 Specification for leather sole and edge wax polishes (First Revision)
2023
Product Specification
767
IS 4825 : 1982 Specification for liquid - In - Glass solid - Stem reference thermometers (first revision)
2023
Product Specification
768
IS 488 : 1980 Specification for glass making sands (Second Revision)
2022
Product Specification
769
IS 4906 : 2017 Radiochemical Laboratory - Code of Safety (First Revision)
2022
Code of Practice
770
IS 4955 : 2020 Household Laundry Detergent Powders — Specification ( Fifth Revision )
2025
Product Specification
771
IS 4956 : 2020 Synthetic Detergents for Industrial Purposes — Specification ( Third Revision )
2025
Product Specification
772
IS 5 : 2007 Colours for ready mixed paints and enamels (Sixth Revision)
2022
Code of Practice
773
IS 5009 : 1968 Specification for buchner funnels
2022
Product Specification
774
IS 5011 : 1968 Specification for gooch crucibles
2022
Product Specification
775
IS 5046 : 1994 Letterpress ink, black, bookprinting - Specification (Second Revision)
2021
Product Specification
776
IS 5081 : 1990 Glass tubes for tubular fluorescent lamps for general lighting service - Specification (First Revision)
2021
Product Specification
777
IS 5127 : 2013 Babul bark - Specification (First Revision)
2024
Product Specification
778
IS 5128 : 2013 Avaram bark - Specification (First Revision)
2025
Product Specification
779
IS 5134 : 1977 Specification for bitumen impregnated paper (First Revision)
2024
Product Specification
780
IS 5165 : 2017 Laboratory glassware - Interchangeable conical ground joints (First Revision)
2022
Product Specification
781
IS 5168 : 2018 Glass feeding bottles - Specification (First Revision)
2023
Product Specification
782
IS 5182 : Part 1 : 2006 Methods for measurement of air pollution Part 1 dust fall (First Revision)
2023
Methods of tests
783
IS 5182 : Part 2 : Sec 2 : 2018 Methods for measurement of air pollution: Part 2 sulphur dioxide: Sec 2 ultraviolet fluorescence method
2023
Methods of tests
784
IS 5182 : Part 4 : 1999 Methods for measurement of air pollution: Part 4 suspended Particulate matter (First Revision)
2024
Methods of tests
785
IS 5182 : Part 5 : 2020 Methods for Measurement of Air Pollution Part 5 Sampling of Gaseous Pollutants ( First Revision )
2024
Methods of tests
786
IS 5182 : Part 6 : 2006 Method for measurement of air pollution: Part 6 oxides of nitrogen (First Revision)
2022
Methods of tests
787
IS 5182 : Part 6 : Sec 2 : 2018 Methods for measurement of air pollution: Part 6 oxides of nitrogen: Sec 2 chemiluminescence method
2023
Methods of tests
788
IS 5182 : Part 9 : 1974 Methods for measurement of air pollution: Part 9 oxidants
2024
Methods of tests
789
IS 5182 : Part 10 : 1999 Methods for measurement of air pollution: Part 10 carbon monoxide (First Revision)
2024
Methods of tests
790
IS 5182 : Part 11 : 2006 Methods for measurement of air pollution: Part 11 benzene, toluene and xylene (BTX) (Second Revision)
2022
Methods of tests
791
IS 5182 : Part 12 : 2004 Method for measurement of air pollution: Part 12 polynuclear aromatic hydrocarbons (PAHs) in air particulate matter (First Revision)
2024
Methods of tests
792
IS 5182 : Part 13 : 1991 Methods of measurement of air pollution: Part 13 total fluorides in ambient air
2024
Methods of tests
793
IS 5182 : Part 14 : 2000 Methods for measurement of air pollution: Part 14 guidelines for planning the sampling ofatmosphere (Second Revision)
2024
Methods of tests
794
IS 5182 : Part 15 : 1974 Methods for measurement of air pollution: Part 15 mass concentration of particulate matter in the atmosphere
2024
Methods of tests
795
IS 5182 : Part 15 : Sec 2 : 2018 Methods for Measurement of Air Pollution Part 15 Mass Concentration of Particulate Matter Section 2 Beta-ray absorption method
2023
Methods of tests
796
IS 5182 : Part 16 : 1980 Methods for measurement of air pollution: Part 16 recommended practice for collection by filtration and determination of mass, number and optical sizing of atmospheric particulates
2024
Methods of tests
797
IS 5182 : Part 17 : 1979 Methods for measurement of air pollution: Part 17 C1 to C2 hydrocarbons in air by gas chromatography
2024
Methods of tests
798
IS 5182 : Part 18 : 1974 Methods for measurement of air pollution: Part 18 continuous analysis and automatic recording of the oxidant content of the atmosphere
2024
Methods of tests
799
IS 5182 : Part 20 : 1982 Methods for measurement of air pollution: Part carbon disulphide
2024
Methods of tests
800
IS 5182 : Part 21 : 2001 Methods for measurement of air pollution: Part 21 non methane hydrocarbons in air by gas chromatography
2022
Methods of tests
801
IS 5182 : Part 22 : 2004 Methods for measurement of air pollution: Part 22 lead
2024
Methods of tests
802
IS 5182 : Part 23 : 2006 Methods for measurement of air pollution: Part 23 respirable suspended particulate maiter (PM 10), cyclonic flow technique
2022
Methods of tests
803
IS 5182 : Part 24 : 2019 Methods for Measurement of Air Pollution Part 24 Fine Particulate Matter ( PM2.5 )
2024
Methods of tests
804
IS 5182 : Part 25 : 2018 Methods for measurement of air pollution: Part 25 ammonia
2023
Methods of tests
805
IS 5184 : 1969 Code of Safety for Hydrofluoric Acid
2021
Code of Practice
806
IS 5194 : 1969 Method for determination of nitrogen - Kjeldahl method
2025
Others
807
IS 5207 : 1969 Specification for brushes, clothes
2021
Product Specification
808
IS 5298 : 2013 Method for determination of distillation range and distillation yield (Second Revision)
2023
Others
809
IS 5301 : 1987 Sodium Chlorate
2022
Product Specification
810
IS 5302 : 1969 Code of Safety for Acetic Anhydride
2021
Code of Practice
811
IS 5305 : 1969 Method for volumetric determination of phosphorus
2024
Methods of tests
812
IS 5311 : 1969 Code of Safety for Carbon Tetrachloride
2021
Code of Practice
813
IS 5316 : 1998 Ammonium carbonate - Specification (First Revision)
2024
Product Specification
814
IS 5379 : 1969 Ammonium thiosulphate, photographic grade
2019
Product Specification
815
IS 5380 : 1976 Specification for sodium bromide, photographic grade (First Revision)
2024
Product Specification
816
IS 5410 : 2013 Cement paint - Specification (Second Revision)
2018
Product Specification
817
IS 5465 : 2013 Sonali bark - Specification (First Revision)
2025
Product Specification
818
IS 5466 : 2013 Vegetable tanning materials - Methods of test (First Revision)
2024
Methods of tests
819
IS 5467 : 1986 Specification for shellac wax (First Revision)
2023
Product Specification
820
IS 5468 : 1993 Blanco - Specification (First Revision)
2025
Product Specification
821
IS 5480 : 1983 Specification for automobile polish, paste (First Revision)
2023
Product Specification
822
IS 5481 : 1992 Floor polish,liquid - Specification (First Revision)
2023
Product Specification
823
IS 5487 : 1992 Metal polish, liquid - Specification (First Revision)
2018
Product Specification
824
IS 5520 : 1969 Specification for wooden lasts for heavy - Duty boots
2021
Product Specification
825
IS 553 : 1984 Specification for rosin (Gum Rosin) (Second Revision)
2024
Product Specification
826
IS 5557 : Part 2 : 2018 All rubber gum boots and ankle boots: Part 2 occupational purposes
2023
Product Specification
827
IS 5570 : 1987 Specification for pickled goat skins (First Revision)
2019
Product Specification
828
IS 5597 : 1970 Specification for leather for boxing gloves
2019
Product Specification
829
IS 5609 : 1983 Specification for leather for hockey ball (First Revision)
2022
Product Specification
830
IS 5623 : 2012 Glass - Determination of coefficient of mean linear thermal expansion (Second Revision)
2022
Methods of tests
831
IS 5667 : 1970 Specification for thinner for cellulose nitrate based paints and lacquers
2020
Product Specification
832
IS 5670 : 1984 Specification for lead thiocyanate for explosive and pyrotechnic compositions (First Revision)
2021
Product Specification
833
IS 5671 : 1984 Specification for strontium nitrate for pyrotechnic compositions (First Revision)
2021
Product Specification
834
IS 5676 : 1995 Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)
2021
Product Specification
835
IS 5681 : 1992 General meteorological thermometers, liquid - In - Glass - Specification (Second Revision)
2022
Product Specification
836
IS 5683 : 1970 Specification for brushes, push-sweeping (Without Handle)
2023
Product Specification
837
IS 5685 : 1970 Code of safety for carbon disulphide (Carbon Bisulphide)
2026
Code of Practice
838
IS 5688 : 2018 Methods of Test for Preformed Block-Type and Pipe-Covering Type Thermal Insulation (Second Revision)
2023
Methods of tests
839
IS 5713 : 1981 Specification for manganese dioxide for explosive and pyrotechnic compositions (First Revision)
2021
Product Specification
840
IS 5715 : 1986 Specification for glass carboys (First Revision)
2022
Product Specification
841
IS 5717 : 2003 Laboratory glassware - Pyknometers (Second Revision)
2021
Product Specification
842
IS 5724 : 2018 Thermal insulating cements - Methods of test (First Revision)
2023
Methods of tests
843
IS 5731 : 1970 Specification for antimony sulphide for explosive and pyrotechnic compositions
2021
Product Specification
844
IS 576 : 1989 Leather - glazed kid for shoe uppers - specification (Second Revision)
2022
Product Specification
845
IS 5760 : 1998 Argon, Compressed and Liquid - Specification (Second Revision)
2021
Product Specification
846
IS 5761 : Part 1 : 1984 Specification for gold cyanide and gold potassium cyanide for electroplating: Part 1 for commercial/engineering applications (First Revision)
2024
Product Specification
847
IS 5761 : Part 2 : 1984 Specification for gold cyanide and gold potassium cyanide for electroplating: Part 2 for special applications (First Revision)
2024
Product Specification
848
IS 5762 : 1970 Methods for determination of melting point and melting range
2024
Others
849
IS 577 : 1986 Specification for upholstery leather (First Revision)
2024
Product Specification
850
IS 5784 : 2001 Shaving soap - Specification (First Revision)
2024
Product Specification
851
IS 5785 : Part 4 : 1976 Methods for performance tests for surface active agents: Part 4 relative detergency (First Revision)
2021
Methods of tests
852
IS 5785 : Part 5 : 2013 Surface active agents - Determination of wetting power by immersion: Part 5 wetting power (First Revision)
2023
Methods of tests
853
IS 579 : 2017 Vegetable tanned sole leather - Specification (Fourth Revision)
2022
Product Specification
854
IS 5813 : 1970 Method for determination of crystallizing point
2024
Others
855
IS 582 : 1970 Methods of chemical testing of leather (First Revision)
2024
Methods of tests
856
IS 582 : Part 1 : 2017 Methods of chemical testing of leather: Part 1 determination of volatile matter (Second Revision)
2022
Methods of tests
857
IS 582 : Part 3 : 2017 Methods of chemical testing of leather: Part 3 determination of sulphated total ash and sulphated water - Insoluble ash (Second Revision)
2023
Methods of tests
858
IS 582 : Part 5 : Sec 2 : 2018 METHODS OF CHEMICAL TESTING OF LEATHER PART 5 DETERMINATION OF CERTAIN AZO COLORANTS IN DYED LEATHERS SECTION 2 DETERMINATION OF 4-AMINOAZOBENZENE
2023
Product Specification
859
IS 5852 : Part 1 : 2019 Toe caps for protection of feet - Specification: Part 1 metallic toe caps (Fifth Revision)
2024
Product Specification
860
IS 5866 : 1979 Specification for chrome leather for high altitude gloves (First Revision)
2024
Product Specification
861
IS 5867 : 1970 Specification for leatherboards or insole
2024
Product Specification
862
IS 5870 : 1970 Specification for glass globes for internal lighting of passenger coaches
2022
Product Specification
863
IS 5914 : 1970 Methods of physical testing of leather
2024
Methods of tests
864
IS 5914 : Part 1 : 2018 Methods of Physical Testing of Leather Part 1 Determination of Water Vapour Absorption
2023
Methods of tests
865
IS 5914 : Part 2 : Sec 2 : 2017 Methods of Physical Testing of Leather Part 2 Determination of Abrasion Resistance Section 2 Martindale Ball Plate Method
2023
Methods of tests
866
IS 5914 : Part 3 : Sec 2 : 2017 Methods of Physical Testing of Leather Part 3 Determination of Soiling Section 2 Tumbling Method
2023
Methods of tests
867
IS 5949 : 1990 Methods for volumetric determination of calcium and magnesium using EDTA (Second Revision)
2024
Methods of tests
868
IS 5969 : 1992 Metal polish, paste - Specification (First Revision)
2023
Product Specification
869
IS 5984 : 1999 Glass shells for miniature lamps - Specification (First Revision)
2022
Product Specification
870
IS 6015 : 1984 Specification for barium hydroxide (First Revision)
2024
Product Specification
871
IS 6017 : 1971 Specification for thermometer for whirling psychrometers
2022
Product Specification
872
IS 6045 : 1994 Wax - Emulsion sole leather polish - Specification (First Revision)
2023
Product Specification
873
IS 6126 : 1971 Specification for nitrocellulose surfacer
2020
Product Specification
874
IS 6128 : 2014 Laboratory glassware - Desiccators (First Revision)
2024
Product Specification
875
IS 6135 : 1981 Specification for soda ash, fused, technical (First Revision)
2024
Product Specification
876
IS 6139 : 1990 Sizes of black and white and colour photographic paper in sheets for general use specification (First Revision)
2024
Product Specification
877
IS 6153 : 1971 Specification for protective leather clothing
2024
Product Specification
878
IS 6154 : 1971 Specification for perforated plates for desiccators
2022
Product Specification
879
IS 6156 : 1971 Code of Safety for Chlorosulphonic Acid
2021
Code of Practice
880
IS 6186 : 1986 Specification for bentonite (First Revision)
2024
Product Specification
881
IS 6191 : 1971 Micro - Biological colour fastness and microscopical tests for leather
2024
Methods of tests
882
IS 6191 : Part 1 : 2018 Methods of Micro-Biological, Colour Fastness and Microscopical Tests for Leather Part 1 Colour Fastness to Water Spotting
2023
Methods of tests
883
IS 6191 : Part 2 : 2017 Methods of Micro-Biological, Colour Fastness and Microcopical Tests for Leather Part 2 Colour Fastness to Water
2023
Methods of tests
884
IS 6191 : Part 3 : 2018 Methods of Micro-Biological, Colour Fastness and Microscopical Test for Leather Part 3 Colour Fastness to Machine Washing ( First Revision)
2023
Methods of tests
885
IS 6199 : 2013 Wattle extract - Specification (First Revision)
2024
Product Specification
886
IS 62 : 2006 Graphite for Paints-Specification
2021
Product Specification
887
IS 6213 : Part 1 : 1971 Methods of test for pulp: Part 1 water solubility of pulp
2024
Methods of tests
888
IS 6213 : Part 2 : 1971 Method - S of test for pulp: Part 2 determination of freeness of pulp
2024
Methods of tests
889
IS 6213 : Part 3 : 1971 Methods of test for pulp: Part 3 determinatiqn of alpha, beta and gamma cellulose in pulp
2019
Methods of tests
890
IS 6213 : Part 4 : 1971 Methods of test for pulp: Part 4 determination of viscosity of pulp
2024
Methods of tests
891
IS 6213 : Part 5 : 1971 Methods of test for pulp: Part 5 solubility of pulp in one percent caustic soda solution
2019
Methods of tests
892
IS 6213 : Part 6 : 1971 Methods of test for pulp: Part 6 copper number of pulp
2019
Methods of tests
893
IS 6213 : Part 8 : Sec 1 : 2017 Methods of test for pulp: Part 8 preparation of laboratory sheets for physical testing: Sec 1 conventional sheet - Former method (First Revision)
2021
Methods of tests
894
IS 6213 : Part 8 : Sec 2 : 2014 Methods of test for pulp: Part 8 preparation of laboratory sheets for physical testing: Sec 2 rapid - Köthen method
2024
Methods of tests
895
IS 6213 : Part 9 : 1973 Methods of test for pulp: Part 9 bLeach requirements and preparation of hand sheets for optical tests of pulp
2024
Methods of tests
896
IS 6213 : Part 11 : 2020 Methods of Test for Pulp Part 11 Determination of Acid-Insoluble Ash ( First Revision )
2025
Methods of tests
897
IS 6213 : Part 12 : 2013 Methods of test for pulp: Part 12 determination of calcium content (First Revision)
2023
Methods of tests
898
IS 6213 : Part 13 : 2013 Methods of test for pulp: Part 13 determination of copper content (First Revision)
2023
Methods of tests
899
IS 6213 : Part 14 : 2013 Methods of test for pulp: Part 14 determination of iron content (First Revision)
2023
Methods of tests
900
IS 6213 : Part 15 : 2013 Methods of test for pulp: Part 15 determination of manganese content (First Revision)
2023
Methods of tests
901
IS 6213 : Part 16 : 1978 Methods of test for pulp: Part 16 dirt count
2025
Methods of tests
902
IS 6213 : Part 17 : 1978 Methods of test for pulp: Part 17 determination of saleable mass of pulp
2024
Methods of tests
903
IS 6213 : Part 18 : 2019 Methods of test for pulp: Part 18 pulp - Determination of chlorine consumption (Degree Of Delignification) (First Revision)
2023
Methods of tests
904
IS 6213 : Part 19 : 1985 Method of test for pulp: Part 19 determination of alkali solubility of pulp
2024
Methods of tests
905
IS 6213 : Part 20 : 1984 Method of test for pulp: Part 20 determination of alkali resistance of pulp
2024
Methods of tests
906
IS 6269 : 1971 Code of Safety for Ethylene Oxide
2021
Code of Practice
907
IS 6271 : 1992 Silver polish, liquid - Specification (First Revision)
2023
Product Specification
908
IS 6274 : 1971 Method of calibrating liquid - In - Glass thermometers
2022
Methods of tests
909
IS 63 : 2006 Whiting for paint and putty - Specification (Third Revision)
2021
Product Specification
910
IS 6301 : 2013 Basic chromium sulphate (For Tanning) - Specification (First Revision)
2024
Product Specification
911
IS 6350 : 1985 Specification for shoe cream (First Revision)
2023
Product Specification
912
IS B6350 : 1985 Specification for shoe cream(bi-lingual) (First Revision)
2023
Product Specification
913
IS 6357 : 2013 Sulphated oil for leather fatliquoring - Specification (First Revision)
2024
Product Specification
914
IS 6361 : 1971 Methods of colorimetric determination of phosphorus
2024
Methods of tests
915
IS 6368 : 1971 Methods for sampling of rubber and rubber combination footwear
2023
Methods of tests
916
IS 646 : 2020 Liquid Chlorine, Technical - Specification ( Third Revision )
2024
Product Specification
917
IS 6481 : 1971 Guide for principal uses and styles of fibreboard containers
2018
Code of Practice
918
IS 6500 : 1972 Specification for thermometer for measurement of sea surface temperature
2022
Product Specification
919
IS 6502 : 1971 Specification for - Size - Stick for footwear industry
2021
Product Specification
920
IS 6506 : 1972 Methods for thermal shock tests on glassware
2022
Methods of tests
921
IS 6507 : 1991 Sodium chromate,tetrahydrate specification (Second Revision)
2024
Product Specification
922
IS 6582 : 1971 Bio - Assay Methods for Evaluating Acute Toxicity of Industrial Effluents and Waste Waters
2024
Methods of tests
923
IS 6582 : Part 2 : 2001 Bio - Assay Method for Evaluating Acute Toxicity of Industrial Effluents and Wastewaters: Part 2 Using Toxicity Factor to Zebra Fish (Brachydanio Rerio) (First Revision)
2024
Methods of tests
924
IS 6588 : 1972 Specification for gold chloride (Chloroauric Acid)
2024
Product Specification
925
IS 6592 : 1972 Specification for soil thermometers
2022
Product Specification
926
IS 6598 : 2018 Cellular concrete for thermal insulation - Specification (First Revision)
2023
Product Specification
927
IS 6609 : Part 1 : 1972 Methods of test for commercial blasting explosives and accessories: Part 1 gun powder
2021
Methods of tests
928
IS 6609 : Part 2 : Sec 1 : 1973 Methods of test for commercial blasting explosives and accessories: Part 2 explosives: Sec 1 explosives, general
2021
Methods of tests
929
IS 6609 : Part 2 : Sec 2 : 1974 Methods of test for commercial blasting explosives and accessories: Part 2 explosives: Sec 2 explosives, permitted
2021
Methods of tests
930
IS 6609 : Part 2 : Sec 3 : 1980 Methods of test for commercial blasting explosives and accessories: Part 2 explosives: Sec 3 explosives, slurry
2021
Methods of tests
931
IS 6609 : Part 3 : 2023 Commercial Blasting Explosives and Accessories � Methods of Test Part 3 Detonators, General and Permitted ( First Revision )
2024
------
932
IS 6609 : Part 4 : 2020 Methods of Test For Commercial Blasting Explosives and Accessories Part 4 Detonating Fuses ( Second Revision )
2025
Methods of tests
933
IS 6609 : Part 5 : 1972 Methods of test for commercial blasting explosives and accessories: Part 4 safety fuses
2021
Methods of tests
934
IS 661 : 2019 Thermal insulation of cold storage - Code of practice (Fourth Revision)
2024
Code of Practice
935
IS 662 : 2020 Anhydrous Ammonia — Specification ( Second Revision )
2024
Product Specification
936
IS 6650 : 1972 Method for the determination of residual thiosulphate and tetrathionate in processed photographic papers
2024
Methods of tests
937
IS 6654 : 1992 Glass containers - Glossary of terms (Second Revision)
2023
Terminology
938
IS 6655 : 1972 Methods of test for sulphur
2024
Methods of tests
939
IS 6657 : 2013 Sal bark - Specification (First Revision)
2025
Product Specification
940
IS 6658 : 2013 Cashew testa - Specification (First Revision)
2025
Product Specification
941
IS 6664 : 1992 Rubber microcellular sheets for soles and heels - Specification (First Revision)
2021
Product Specification
942
IS 67 : 1998 Silica for paints - Specification (Second Revision)
2024
Product Specification
943
IS 6704 : 1992 Pigmented floor polish, paste - Specification (First Revision)
2023
Product Specification
944
IS 6714 : 1989 Ready mixed paint, finishing, non - slip, deck - Specification (First Revision)
2024
Product Specification
945
IS 6715 : 1972 Specification for master cartons for export of frozen sea foods and frog legs
2024
Product Specification
946
IS 6719 : 1972 Solid Pvc Soles And Heels
2023
Product Specification
947
IS 6766 : 1993 Buffing compounds used for nickel and chrome plated surfaces - Specification (First Revision)
2021
Product Specification
948
IS 6771 : 1972 Specification for aluminium polish, paste for aircraft
2023
Product Specification
949
IS 68 : 2006 China clay (Kaolin) for paints - Specification (Second Revision)
2021
Product Specification
950
IS 6819 : 1973 Code of Safety for Calcium Carbide
2021
Code of Practice
951
IS 6830 : 1994 Offset ink, black, general black - Specification (First Revision)
2023
Product Specification
952
IS 6917 : 1973 Specification for glass lenses for automobile headlights (Replaceable Bulb Type)
2023
Product Specification
953
IS 6921 : 1973 Methods of sampling and test for lac and lac products
2023
Methods of tests
954
IS 6945 : 1973 Code of practice for packaging glass and glassware
2023
Code of Practice
955
IS 6947 : Part 1 : 1973 Methods of estimation of composite pigments in oil pastes and ready mixed paints: Part 1 estimation of lead, zinc oxide, titanium dioxide, calcium compounds and zinc sulphide
2019
Methods of tests
956
IS 6947 : Part 2 : 1975 Methods of estimation of composite pigments in oil pastes, ready mixed paints and enamels: Part 2 estimation of zinc chromes, ferric oxide and aluminium
2019
Methods of tests
957
IS 6947 : Part 3 : 1975 Methods of estimation of composite pigments in oil pastes, ready mixed paints and enamels: Part 3 Estimation of lead chromes, iron blues and zinc compounds
2019
Methods of tests
958
IS 6948 : 1973 Specification for ready mixed paint, undercoat, synthetic for ships
2020
Product Specification
959
IS 6951 : 1973 Specification for ready mixed paint, finishing, exterior, for ships
2020
Product Specification
960
IS 6954 : 1973 Code of Safety for Caustic Potash
2021
Code of Practice
961
IS 6956 : 2001 Cover paper - Specification (First Revision)
2022
Product Specification
962
IS 6980 : 1983 Specification for tetrasodium pyrophosphate, anhydrous, technical (First Revision)
2024
Product Specification
963
IS 6981 : 1992 Glass jars fqr air - Depolarized primary (Caustic Soda) wet cells - Specification (First Revision)
2023
Product Specification
964
IS 6988 : 2002 Fine (Bone) china crockeryware - Specification (Second Revision)
2018
Product Specification
965
IS 7000 : 1973 Specification for general purpose maximum and minimum thermometers
2022
Product Specification
966
IS 7017 : 1973 Method for colorimetric determination of traces of heavy metals by dithizone
2024
Methods of tests
967
IS 7022 : Part 3 : 2018 Glossary of Terms Relating to Water Part 3 Marine Water and Related Methods
2023
Terminology
968
IS 7038 : 1973 Specification for chloroplatinic acid (Platinum Chloride)
2024
Product Specification
969
IS 7063 : Part 1 : 2017 Methods of test for corrugated fibreboard: Part 1 determination of single sheet thickness (First Revision)
2021
Methods of tests
970
IS 7063 : Part 2 : 2018 Method of test for corrugated fibreboard: Part 2 determination of edgewise crush resistance (Unwaxed Edge Method) (First Revision)
2022
Methods of tests
971
IS 708 : 1987 Specification for potassium chlorate for explosive and pyrotechnic industry (Second Revision)
2021
Product Specification
972
IS 7087 : 1979 Specification for ceramic tower packings (First Revision)
2023
Product Specification
973
IS 7124 : 1973 Specification for gun powder
2023
Product Specification
974
IS 7130 : 1994 Chlorosulphonic acid,technical - Specification
2025
Terminology
975
IS 7151 : 1991 Corrugated fibreboard boxes for para - Dropping of supplies - specification
2023
Product Specification
976
IS 7161 : 1973 Specification for vegetable parchment or greaseproof paper/aluminium foil laminate for wrapping butter
2024
Product Specification
977
IS 7162 : 1973 Specification for waxed cartons for packaging of ice - Cream
2024
Product Specification
978
IS 7163 : 1989 Potassium iodide, pure and analytical reagent - Specification (First Revision)
2025
Product Specification
979
IS 7164 : 1973 Specification for stopper
2019
Product Specification
980
IS/ISO 718 : 1990 Laboratory glassware - Thermal shock and thermal shock endurance - Test methods
2023
Methods of tests
981
IS 7186 : 1973 Glossary of terms relating to paper and flexible packaging
2023
Terminology
982
IS 7223 : 1986 Specification for potassium chloride, analytical reagent (First Revision)
2024
Product Specification
983
IS 7324 : 1983 Specification for brix hydrometers (First Revision)
2022
Product Specification
984
IS 7329 : 1974 Specification for metal lasts for safety rubber - Canvas ankle boots
2023
Product Specification
985
IS 7374 : 1974 Specification for glass rods and tubing for laboratory glassware
2022
Product Specification
986
IS 74 : 1979 Methods of sampling and test for drying oils for paints (Second Revision)
2022
Methods of tests
987
IS 7401 : 1987 Specification for paraffin wax for explosive and pyrotechnic industry (First Revision)
2023
Product Specification
988
IS 7415 : 1974 Code of Safety for Aniline
2023
Code of Practice
989
IS 7420 : 1974 Code of Safety for Phthalic Anhydride
2021
Code of Practice
990
IS 7444 : 1974 Code of Safety for Methanol
2023
Code of Practice
991
IS 7473 : 1974 Specification for brushes, tar
2023
Product Specification
992
IS 7477 : 1974 Specification for brushes, harness hard
2023
Product Specification
993
IS/ISO 7482 : PART 1 : 1998 Raw goat skins: Part 1 descriptions of defects
2022
Code of Practice
994
IS/ISO 7482 : Part 3 : 2005 Raw goat skins: Part 3 guidelines for grading on the basis of defects
2022
Code of Practice
995
IS 7511 : Part 1 : 1992 Dimensions for neck finishes: Part 1 shallow continuous thread finish (Second Revision)
2023
Dimensions
996
IS 7511 : Part 2 : 1986 Dimensions for neck finishes part 2 Shallow Continuous Thread Finish For deep Screw Caps (R3/d) (First Revision)
2022
Dimensions
997
IS 7511 : Part 3 : 1986 Dimensions for neck finishes: Part 3 roll - On thread non - Pilferproof (Ronpp) (First Revision)
2022
Dimensions
998
IS 7511 : Part 4 : 1986 Dimensions for neck finis - Hes: Part 4 roll - On threads pilferproof (First Revision)
2022
Dimensions
999
IS 7511 : Part 5 : 1986 Dimensions for neck finishes: Part 5 vial goldie seal glass finishes (First Revision)
2022
Dimensions
1000
IS 7511 : Part 6 : 1986 Dimensions for neck finishes: Part 6 dual neck finish (First Revision)
2022
Dimensions
1001
IS 7511 : Part 7 : 1986 Dimensions for neck finishes: Part 7 crown finish (First Revision)
2022
Dimensions
1002
IS 7511 : Part 8 : 1986 Dimensions for neck finishes: Part 8 vacuum lug finish (First Revision)
2022
Dimensions
1003
IS 7511 : Part 9 : 1992 Dimensions for neck finishes: Part 9 28 mm finishes for pressurised liquids
2022
Dimensions
1004
IS 7511 : Part 10 : 1991 Dimensions for neck finishes: Part 10 continuous screw thread for use with plastic caps
2022
Dimensions
1005
IS 7526 : 1996 Detonating fuses - Specification (Second Revision)
2019
Product Specification
1006
IS 7532 : 2018 Soft soap - Specification (First RevisIon)
2023
Product Specification
1007
IS 7554 : 2009 Toe puff and counter stiffener - Specification (First Revision)
2024
Product Specification
1008
IS 7588 : 1992 Barytes for explosives and pyrotechnic compositions - Specification (First Revision)
2021
Product Specification
1009
IS 7589 : 1974 Specification for china clay for explosive and pyrotechnic industry
2021
Product Specification
1010
IS 7597 : 2001 Surface active agents - Glossary of terms (First Revision)
2024
Terminology
1011
IS 7601 : 1983 Specification for fibreboard drums for general purposes (First Revision)
2023
Product Specification
1012
IS 7602 : 1975 Specification for lead chromate for explosive and pyrotechnic compositions
2021
Product Specification
1013
IS 7633 : 1982 Specification for calcium carbonate for explosive and pyrotechnic industry (First Revision)
2021
Product Specification
1014
IS 77 : 1976 Specification for linseed oil, boiled, for paints (Second Revision)
2024
Product Specification
1015
IS 7708 : 1975 Specification for vacuum flasks
2023
Product Specification
1016
IS 7721 : 1986 Specification for chrome tanned leather laces for heavy duty footwear (First Revision)
2019
Product Specification
1017
IS 7738 : 1975 Specification for safety fuse for commercial use
2021
Product Specification
1018
IS 7742 : 2013 Synthetic emulsion resin binders - Specification (First Revision)
2025
Product Specification
1019
IS 7775 : 1975 Specification for ceramic grinding media and lining
2025
Product Specification
1020
IS 7812 : 1975 Code of Safety for Mercury
2021
Code of Practice
1021
IS 788 : 1971 Specification for ink,drawing, waterproof, coloured (First Revision)
2025
Product Specification
1022
IS 789 : 2018 Ink, drawing, waterproof, black ? specification (Second Revision)
2022
Product Specification
1023
IS 798 : 2020 Orthophosphoric Acid — Specification ( Third Revision )
2024
Product Specification
1024
IS 7982 : 1992 Automobile polish, liquid - Specification (First Revision)
2023
Product Specification
1025
IS 7983 : 1994 Toilet cleaner, liquid - Specification (First Revision)
2024
Product Specification
1026
IS 7984 : 1991 Rubbing compound - Specification (First Revision)
2023
Product Specification
1027
IS 80 : 1991 Tung oil for paints - Specification (Second Revision)
2022
Product Specification
1028
IS 8017 : 1988 Specification for vitreous enamelled reflectors for use with illuminating device
2025
Dimensions
1029
IS 8063 : 1976 Specification for red lead for explosive and pyrotechnic industry
2021
Product Specification
1030
IS 8085 : Part 1 : 1986 Methods of test for footwear: Part 1 dimensions, fitting, adhesion test, peel test, heat resistance test and ageing test (First Revision)
2023
Methods of tests
1031
IS 8085 : Part 2 : 1999 Methods of test for footwear: Part 2 footwear performance test, stiffness test for shanks, lastometer test for cracking of uppers; and performance test for upper fabrics, coated fabrics, sock lining and other lining materials
2021
Methods of tests
1032
IS B8087 : 1976 Specification for Briefcases
2024
Product Specification
1033
IS 8091 : 2018 Industrial plant layout - Code of safe practice (Second Revision)
2023
Code of Practice
1034
IS 8095 : 1976 Specification for accident prevention tags
2023
Product Specification
1035
IS 81 : 1989 Dehydrated castor oil for paints - Specification (Second Revision)
2024
Product Specification
1036
IS 8113 : 1976 Specification for primary cartons for packaging butter
2024
Product Specification
1037
IS 8155 : 1976 Specification for portfolios
2019
Product Specification
1038
IS 8170 : 1981 Guidelines for identification of finis - Hed leather for export (Third Revision)
2019
Code of Practice
1039
IS 8180 : 2020 Household Laundry Detergent Bars — Specification ( Third Revision )
2025
Product Specification
1040
IS 8185 : 1976 Code of Safety for Phosgene
2021
Code of Practice
1041
IS 8188 : 1999 Treatment of Water for Cooling Towers - Code of Practice (First Revision)
2020
Code of Practice
1042
IS 82 : 1973 Methods of sampling and test for thinners and solvents for paints (First Revision)
2022
Methods of tests
1043
IS 8218 : Part 1 : 1976 Safety code for plant railways : Part 1 Layout
2024
Code of Practice
1044
IS 8218 : Part 2 : 1982 Safety code for plant railways: Part 2 Locomotives, wagons and their movement
2024
Code of Practice
1045
IS 8281 : 1976 Specification for hydroxylamine sulphate, photographic grade
2024
Product Specification
1046
IS 8325 : 1983 Specification for nickel formate for nickel catalyst (First Revision)
2025
Product Specification
1047
IS/ISO 835 : 2007 Laboratory glassware - Graduated pipettes
2022
Product Specification
1048
IS 840 : 1986 Cashewnut shell liquid (CNSL) (Second Revision)
2022
Product Specification
1049
IS 8517 : 1977 Specification for Bag , Air Travel
2024
Product Specification
1050
IS 8518 : 1977 Specification for suitcase, air travel
2019
Product Specification
1051
IS 8541 : 1993 Polish, paste, for floor and wooden furniture - Specification (First Revision)
2021
Product Specification
1052
IS/ISO 8573 : PART 1 : 2010 Compressed Air: Part 1 Contaminants and Purity Classes (First Revision)
2022
Safety Standard
1053
IS/ISO 8573 : Part 2 : 2018 Compressed Air - Contaminant Measurement Part 2 Oil Aerosol Content (First Revision)
2024
Methods of tests
1054
IS/ISO 8573 : Part 4 : 2019 Compressed Air Contaminant Measurement Part 4 Particle Content
2024
Terminology
1055
IS/ISO 8573 : Part 5 : 2001 Compressed Air: Part 5 Test Methods for Oil Vapour And Organic Solvent Content
2020
Methods of tests
1056
IS 8587 : 1993 Acid grade fluorspar for chemical industry - Specification (First Revision)
2025
Product Specification
1057
IS 8592 : 1977 Methods for identification of brush filling materials of animal origin
2023
Others
1058
IS 8601 : 2013 Myrobalan nuts (Whole And Crushed) for tanning industry - Specification (First Revision)
2024
Product Specification
1059
IS 8606 : 1977 Specification brass screw wire for footwear
2021
Product Specification
1060
IS 8643 : 1977 Specification for dye, methyl violet, for stamp - Pad ink
2025
Product Specification
1061
IS 868 : 1990 Sealing wax - Specification (First Revision)
2018
Product Specification
1062
IS 8687 : Part 2 : 2020 Methods of Test for Vitreous Enamels and Frits Part 2 Fusion Flow Test ( First Revision )
2025
Methods of tests
1063
IS 8697 : 1977 Code of practice for export packaging of glass container ware
2023
Code of Practice
1064
IS 8728 : 1977 Specification for adjustable range thermometers
2023
Product Specification
1065
IS 8729 : 2018 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (First Revision)
2023
Code of Practice
1066
IS 8751 : Part 1 : 1978 Footwear sizes in mondopoint system: Part 1 fundamental characteristics
2021
Methods of tests
1067
IS 8751 : Part 2 : 1978 Footwear sizes in mondopoint system: Part 2 length grading
2021
Product Specification
1068
IS 8766 : 1978 Specification for driers for paints
2024
Product Specification
1069
IS 8767 : 2020 Calcium carbonate, precipitated, and activated, for paints - Specification (First Revision)
2025
Product Specification
1070
IS 8768 : 2000 Method of measurement of colour in liquid chemical products platinum - Cobalt scale (Second Revision)
2025
Others
1071
IS 8769 : 1978 Methods of determination of ash and sulphated ash
2024
Others
1072
IS 8770 : 1978 Specification for artificial sea water for laboratory use
2024
Product Specification
1073
IS 878 : 2008 Laboratory glassware - Graduated measuring cylinders (Second Revision)
2022
Product Specification
1074
IS 8787 : 2018 Principles of design, construction and use of liquid - In - Glass thermometers (First Revision)
2024
Code of Practice
1075
IS 8863 : Part 1 : 1978 Leather sealing cups: Part 1 `U' cups
2023
Product Specification
1076
IS 8883 : Part 1 : 2005 Methods of sampling chemical and chemical product: Part 1 general requirements and precautions (First Revision)
2022
Others
1077
IS 8883 : Part 2 : Sec 1 : 1978 Methods of sampling chemicals and chemical products: Part 2 sampling equipment: Sec 1 for solids
2024
Others
1078
IS 8883 : Part 2 : Sec 2 : 1978 Methods of sampling of chemicals and chemical products: Part 2 sampling equipment: Sec 2 for liquid
2024
Others
1079
IS 8883 : Part 2 : Sec 3 : 1978 Methods of sampling chemical and chemical products: Part 2 sampling equipment: Sec 3 for gases
2024
Others
1080
IS 8897 : 1978 Tables for calibration and method of verification of volumetric glassware
2023
Methods of tests
1081
IS 8940 : 1978 Code of practice for maintenance and care of industrial safety equipment for eye and face protection
2018
Code of Practice
1082
IS 8970 : 1991 Alumintum foil laminatefor packaging - Specification (First Revision)
2024
Product Specification
1083
IS 8982 : 2019 Ready mixed paint, finishing, air-drying for war equipment - Specification (Second Revision)
2024
Product Specification
1084
IS 8983 : 2018 Ready mixed paint, finishing, stoving for war equipment - Specification (First Revision)
2023
Product Specification
1085
IS 9004 : 2013 Tamarind seed testa - Specification (First Revision)
2024
Product Specification
1086
IS 9028 : 1978 Glossary of terms relating to paper sacks
2018
Terminology
1087
IS 9031 : 1992 Teleprinter paper page rolls - Specificaiton (First Revision)
2022
Product Specification
1088
IS 9034 : 2018 Enamel, synthetic, exterior, air drying, for use on primed surfaces of motor vehicles and other equipment - Specification (First Revision)
2023
1089
IS 9042 : 1978 Method of measurement and expression of the dimensions of paper sacks
2023
Methods of tests
1090
IS 9052 : 1978 Code of safety for Aluminium Chloride, Anhydrous
2021
Code of Practice
1091
IS 9053 : 1978 Code of Safety for m - Dinitrobenzene
2021
Code of Practice
1092
IS 915 : 2012 Laboratory glassware - One - Mark volumetric flasks (Third Revision)
2021
Product Specification
1093
IS 9154 : 2020 Method for Determination of Alkali Resistance of Glass ( First Revision )
2025
Methods of tests
1094
IS 9157 : 1979 Specification for sodium nitrate and potassium nitrate for glass compositions
2022
Product Specification
1095
IS 9189 : 1979 Method for determination of free chlorine in chlorinated organic liquid compounds (Colorimetric)
2024
Methods of tests
1096
IS 9190 : 1979 Methods for determination of acidity and alkalinity in halogenated organic solvents and their admixtures
2024
Others
1097
IS 9213 : 1979 Specification for bod bottles
2022
Product Specification
1098
IS 9252 : 1979 Method for determination of zinc (Volumetric)
2024
Methods of tests
1099
IS 9277 : 1979 Code of Safety for Monochlorobenzene
2021
Code of Practice
1100
IS 9278 : 1979 Code of Safety for Zinc Phosphide
2021
Code of Practice
1101
IS 9341 : 1979 Specification for sulphamic acid for electroplating
2024
Product Specification
1102
IS 9342 : 1987 Specification for sodium hypophosphite for electroless plating (First Revision)
2024
Product Specification
1103
IS 9343 : 1979 1-phenyl-3-pyrazolidone, photographic grade
2024
Product Specification
1104
IS 9403 : 2018 Method of test for thermal conductance and transmittance of built - Up Section by means of guarded hot box (First Revision)
2023
Methods of tests
1105
IS 9424 : 1979 Specification for sodium metastlicate
2024
Product Specification
1106
IS 9425 : 1980 Specification for selenium for glass compositions
2022
Product Specification
1107
IS 9458 : 2020 Synthetic Detergents for Washing Woollen and Silk Fabrics — Specification ( Second Revision )
2025
Product Specification
1108
IS 9473 : 2002 Respiratory protective devices - Filtering half masks to protect against particles - Specification (First Revision)
2025
Product Specification
1109
IS 9489 : 2018 Method of Test for Thermal Conductivity of Thermal Insulation Materials by Means of Heat Flow Meter ( First Revision )
2024
------
1110
IS 9490 : 2018 Method for determination of thermal conductivity of thermal insulation materials (Water Calorimeter Method) (First Revision)
2023
Methods of tests
1111
IS 9493 : 1980 Specification for cartons for non - Soapy detergents
2024
Product Specification
1112
IS 9497 : 1980 Method for determination of sodium and potassium (Flame Photometric)
2024
Methods of tests
1113
IS 9506 : 1980 Method for determination of sulphate (volumetric)
2025
Methods of tests
1114
IS 9518 : 1980 Specification for automobile polish, liquid, containing silicone
2025
Product Specification
1115
IS 9600 : 1980 Specification for safety matches in booklet
2021
Product Specification
1116
IS 9621 : 1980 Principles of construction and adjustment of glass hydrometers
2022
Code of Practice
1117
IS 9623 : 2008 Selection, use and maintenance of respiratory protective devices - Code of practice (First Revision)
2023
Code of Practice
1118
IS 9700 : 1991 Activated alumina - Specification (First Revision)
2025
Product Specification
1119
IS 9743 : 2020 Thermal Insulation Finishing Cement — Specification ( Second Revision )
2024
Product Specification
1120
IS 9744 : 1981 Code of Safety for Thionyl Chloride
2021
Code of Practice
1121
IS 9749 : 2020 Potash Feldspar and Soda Feldspar for Glass and Ceramic Industry — Specification ( Second Revision )
2025
Product Specification
1122
IS 9780 : 1992 Glass bottles for tomato ketchup specification (First Revision)
2023
Product Specification
1123
IS 9781 : 1989 Glass jars for jams, jellies and marmalades - Specification (First Revision)
2021
Product Specification
1124
IS 9785 : 1981 Code of Safety for Aluminium Alkyls
2021
Code of Practice
1125
IS 9786 : 1981 Code of Safety for Vinyl Chloride (VCM)
2023
Code of Practice
1126
IS 9787 : 1981 Code of Safety for Phosphoryl Chloride
2021
Code of Practice
1127
IS 9806 : 2001 Methods of test for and permissible limits of toxic materials released from ceramicware, vitreous enamelware, glassware and glass - Ceramicware in contact with food (First Revision)
2017
Methods of tests
1128
IS 9862 : 2017 Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision)
2022
Product Specification
1129
IS 9880 : 1981 Specification for wax - Coated paper splints
2021
Product Specification
1130
IS 9894 : 1981 Method of test for smoothness/ roughness of paper
2023
Methods of tests
1131
IS 9923 : 1981 Specification for palladium salts for electroplating
2024
Product Specification
1132
IS 9931 : 1981 Mercurimetric method for determination of chloride in inorganic chemicals
2024
Methods of tests
1133
IS 9937 : 1981 Specification for portable methanometer (Electrical Type)
2018
Product Specification
1134
IS 9958 : 1981 Atomic absorption spectrophotometric method - For determination of zinc
2022
Methods of tests
1135
IS 997 : 1973 Specification for limestone and dolomite for glass industry (First Revision)
2022
Product Specification
1136
IS 9985 : 1992 Sodium alkyl benzene sulphonate, technical - Specification (First Revision)
2021
Product Specification
1137
IS 9988 : 1981 Specification for waxed paper for bread and biscuits
2024
Product Specification
