1
IS 1012 : 2002 Turbine lubricating oils - Specification (Third Revision)
3
Product Specification
2
IS 10130 : 1992 Vulcanized vegetableoils (Factice) for rubber industry - Specification (First Revision)
1
Product Specification
3
IS 10142 : 2025 POLYSTYRENE CRYSTAL AND HIGH IMPACT FOR ITS SAFE USE IN CONTACT WITH FOODSTUFFS PHARMACEUTICALS AND DRINKING WATER - SPECIFICATION (second revison)
2
------
4
IS 10148 : 2023 Positive list of constituents of polyvinyl chloride (pvc) and its copolymers in contact with foodstuffs, pharmaceuticals and drinking water (First Revision)
1
Product Specification
5
IS 10151 : 2019 Polyvinyl chloride (pvc) and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification (First Revision)
1
Product Specification
6
IS 10171 : 1999 Guide on suitability of plastics for food packaging (Second Revision)
2
Code of Practice
7
IS 10284 : 2026 Lipsalve — Specification (First Revision)
1
------
8
IS 10350 : 2020 Powder Hair Dyes — Specification ( Third Revision )
3
Product Specification
9
IS 10357 : 1990 General purpose furnace [GPF (N - 660)] Carbon black - Specification (First Revision)
1
Product Specification
10
IS 10358 : 1991 Carbon black, super abrasion furnace [SAF (N - 110)] - Specification (First Revision)
1
Product Specification
11
IS 10377 : 2024 Specification for para-Phenylenediamine
1
------
12
IS 10387 : 1990 Semi - Reinforcing furnace [SRF - LM - NS (N-762) and SRF - HM - NS (N-774)] carbon black - Specification (First Revision)
1
Product Specification
13
IS 10457 : 2023 N-Methyl-J-Acid - Specification (First revision)
1
------
14
IS 10458 : 2023 Di-J-Acid - Specification (First Revision)
1
------
15
IS 10511 : 2024 METHOD FOR DETERMINATION OF ASPHALTENES IN BITUMEN BY PRECIPITATION WITH NORMAL HEPTANE (First Revision)
1
------
16
IS 10512 : 2003 Method for determination of wax content in bitumen - Specification (First Revision)
1
Methods of tests
17
IS 10532 : Part 4 : 2019 Fire resistant hydraulic fluids - Specification: Part 4 phosphate esters type (First Revision)
1
Product Specification
18
IS 10647 : 2025 Wheel Bearing Grease - Specification (First Revision of IS 10647))
1
------
19
IS 10655 : 2022 Rubber steam hose - Specification (Second Revision)
2
Others
20
IS 10660 : 2024 Rubber Hydraulic Hose with Textile Reinforcement — Specification (First Revision)
1
------
21
IS 10733 : 2023 Electrically bonded road and rail tanker hose of rubber, resistant to petroleum products - Specification (First Revision)
1
------
22
IS 1083 : 2022 Industrial White Oil - Specification (Second Revision)
2
Product Specification
23
IS 10840 : 1994 Blow moulded HDPE containers for packing of vanaspati - Specification (Second Revision)
2
Product Specification
24
IS 10889 : 2004 High density polyethylene films (First Revision)
1
Product Specification
25
IS 10908 : 2023 Flexible rubber tubing for liquefied petroleum gas - Specification (Second Revision)
2
System Standard
26
IS 10951 : 2020 Specification for polypropylene (pp) materials for moulding and extrusion (Second Revision)
2
Product Specification
27
IS 10999 : 2021 Kum Kum Powder - Specification ( Second Revision )
2
Others
28
IS 11022 : 2025 METHODS OF SAMPLING AND TEST FOR GLUES, BONE, SKIN/FLESHINGS AND FISH GLUES (First Revision)
1
------
29
IS 11142 : 2023 Henna MEHENDI powder Specification
2
------
30
IS 1115 : 1986 Specification for general purpose cutting oil, soluble (Second Revision)
2
Product Specification
31
IS 11159 : Part 1 : 2020 General Classification of Lubricants, Industrial Oils and Related Products Part 1 Class L ( First Revision )
1
Others
32
IS 11159 : Part 7 : 2019 Lubricants, industrial oils and related products (Class L) - Classification: Part 7 family c (Gear Systems) (First Revision)
1
Others
33
IS 11159 : Part 5 : 2019 Lubricants, industrial oils and related products (Class L) - Classification: Part 5 family h (Hydraulic Systems) (First Revision)
1
Others
34
IS 11159 : Part 2 : 2021 Classification of lubricants industrial oils and related products Part 2 Family A Total loss systems
1
Methods of tests
35
IS 11159 : Part 3 : 2021 General classification of lubricants industrial oils and related products Part 3 Family F Spindle bearings bearings and associated clutches
1
Code of Practice
36
IS 1118 : 2019 Gear lubricants, multipurpose (Extreme Pressure Gear Oil) - specification (Second Revision)
2
Product Specification
37
IS 11254 : 2009 Code of practice for dispensation of aviation fuel and allied products (First Revision)
1
Code of Practice
38
IS 11342 : 1994 Packaging - Sacks made from thermoplastic films - Description and method of measurement (First Revision)
1
Methods of tests
39
IS 11343 : 1994 Packaging - Sacks made from thermoplastic films - Vocabulary (First Revision)
1
Terminology
40
IS 11352 : 2018 Flexible pouches for the packing of vanaspati up to 2 kg or 2 litres - Specification (Third Revision)
3
Product Specification
41
IS 11356 (Part 1) : 2023 Styrene-Butadiene rubber latex - Specification: Part 1 Non-Carboxylated (Second Revision) Amendment - 2
2
Methods of tests
42
IS 11356 : Part 2 : 2023 Styrene-Butadiene rubber latex - Specification: Part 2 Carboxylated (Second Revision)
2
Methods of tests
43
IS 11375 : 2021 GROUNDNUT OIL FOR COSMETIC INDUSTRY SPECIFICATION First Revision of IS 11375
1
Service Specification
44
IS 11376 : 2021 Sesame oil for Cosmetic Industry Specification First Revision of IS 11376
1
Service Specification
45
IS 11377 : 2001 Guidelines for hygienic manufacture of cosmetics (First Revision)
1
Code of Practice
46
IS 11434 : 2023 Ionomer resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification (First Revision)
1
------
47
IS 11435 : 2024 Positive list of constituents of ionomer resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water (First Revision)
1
------
48
IS 11486 : 2021 Castor Oil - Specification First Revision
1
Methods of tests
49
IS 11489 : 2025 HEAVY PETROLEUM STOCK (HPS ) - SPECIFICATION (First Revision)
1
------
50
IS 1153 : 2021 Temporary Corrosion Preventives Hard Film Solvent Deposited
3
Code of Practice
51
IS 1154 : 2022 Temporary Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Water Displacing - Specification (second revision)
3
Methods of tests
52
IS 11557 : 2026 2 - NAPHTHYLAMINE - 3: 6: 8 - TRISULPHONIC ACID TECHNICAL SPECIFICATION
1
------
53
IS 11584 : 2024 HIGH DENSITY POLYETHYLENE (HDPE) CRATES FOR MILK POUCHES - SPECIFICATION (first revision)
1
------
54
IS 11637 : 2022 Calcium Based EP Grease - Specification (first revision)
1
Code of Practice
55
IS 11659 : 2023 Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification (First Revision)
1
Product Specification
56
IS 11695 : 2020 Inhibited Type Machinery Oils ? Specification ( First Revision )
1
Product Specification
57
IS 11696 : 2020 Inhibited Type Spindle Oils ? Specification ( First Revision )
1
Product Specification
58
IS 11704 : 2023 Ethylene acrylic acid (eaa) copolymers for their safe use in contact with food-stuffs, pharmaceuticals and drinking water - Specification (First Revision)
1
------
59
IS 11705 : 2024 Positive list of constituents of ethylene/acrylic acid (eaa) copolymers for their safe use in contact with foodstuffs, pharmaceuticals and drinking water (First Revision)
1
------
60
IS 1177 : 2022 OIL OF VETIVER CULTIVATED AND KHUS SPECIFICATION
3
Code of Practice
61
IS 11805 : 2024 POLYETHYLENE POUCHES FOR PACKAGING LIQUID DAIRY PRODUCTS — SPECIFICATION (THIRD REVISION)
3
------
62
IS 11909 : 2019 Oil of sweet orange [citrus sinensis (L.) osbeck], obtained by physical extraction of the peel (First Revision)
1
Product Specification
63
IS 11910 : 2018 Specification for spearmint oil (First Revision)
1
Product Specification
64
IS 1201 to 1220 : 1978 Methods for testing tar and bituminous materials (First Revision)
1
Methods of tests
65
IS 1201 : 2021 Methods for testing tar and bituminous materials - Sampling of bituminous materials (Second Revision)
1
Others
66
IS 1202 : 2021 Methods for testing tar and bituminous materials - Determination of specific gravity (Second Revision)
1
Process Specification
67
IS 1203 : 2022 Methods for testing tar and bituminous materials - Determination of penetration (Second Revision)
2
Methods of tests
68
IS 1204 : 2022 Methods for testing tar and bituminous materials - Determination of residue of specified penetration (Second Revision)
1
Product Specification
69
IS 1205 : 2022 Methods for testing tar and bituminous materials - Determination of softening point - Ring and ball apparatus (Second Revision)
1
Product Specification
70
IS 1206 : Part 3 : 2021 Methods for testing tar and bituminous materials - Determination of viscosity : Part 3 - Kinematic viscosity (Second Revision)
2
Product Specification
71
IS 1206 : Part 2 : 2022 Methods for testing tar and bituminous materials - Determination of viscosity : Part 2 - Absolute viscosity (Second Revision)
2
Methods of tests
72
IS 1206 : Part 1 : 2023 Methods for testing tar and bituminous materials : Part 1 - Determination of viscosity by volumetric flow rate method (Second Revision)
1
Product Specification
73
IS 1207 : 2022 Methods for testing tar and bituminous materials - Determination of equiviscous temperature (EVT) (Second Revision)
1
Methods of tests
74
IS 12076 : 2026 PRECIPITATED SILICA FOR RUBBER INDUSTRY SPECIFICATION
1
------
75
IS 1208 : Part 1 : 2023 Methods for Testing Tar and Bituminous Materials - Determination of Ductility : Part 1 (Second Revision)
2
Product Specification
76
IS 1209 : 2021 Methods for testing tar and bituminous materials - Determination of flash point and fire point (Second Revision)
1
Product Specification
77
IS 1210 : 2020 Methods for testing tar and bituminous materials - Float test (Second Revision)
1
Others
78
IS 1211 : 2022 Methods for testing tar and bituminous materials - Determination of water content - Dean and stark method (Second Revision)
1
Methods of tests
79
IS 1212 : 2022 Methods for testing tar and bituminous materials - Determination of loss on heating (Second Revision)
1
Process Specification
80
IS 1213 : 2025 Tar and Bituminous Materials - Distillation Test - Methods of Test (Third Revision)
3
------
81
IS 1215 : 2021 Methods for testing tar and bituminous materials - Determination of matter insoluble in toluene (Second Revision)
1
Product Specification
82
IS 1216 : 2023 Tar and bituminous materials - Methods for test - Determination of solubility in trichloroethylene (Second Revision)
1
------
83
IS 1216 : 2026 Tar and bituminous materials - Determination of solubility in trichloroethylene or toluene - Methods of test (Third Revision)
2
------
84
IS 1217 : 2024 Tar and Bituminous Materials - Determination of Mineral Matter (Ash) - Methods of Test (Second revision)
2
------
85
IS 1218 : 2024 Tar and Bituminous Materials -Methods for Test -Determination of Phenols (Second Revision)
2
------
86
IS 1219 : 2024 Tar and Bituminous Materials -Methods for Test Determination of Naphthalene (Second Revision)
2
------
87
IS 1220 : 2024 Tar and Bituminous Materials - Methods for Test -Determination of Volatile Matter Content (Second Revision)
2
------
88
IS 12203 : 2025 Multipurpose Grease for Automotive Applications - Specification (Second Revision of IS 12203)
2
------
89
IS 12210 : 2023 Caprolactam - Specification (First Revision)
1
------
90
IS 12247 : 2024 Nylon 6 polymer for its safe use in contact with foodstuffs pharmaceuticals and drinking water - Specification (First Revision)
1
------
91
IS 12252 : 2017 Polyalkylene terephthalates (pet and pbt), their copolymers and list of constituents in raw materials and end products for their safe use in contact with foodstuffs and pharmaceuticals (First Revision)
1
Product Specification
92
IS 12345 : 2024 Vinyl Acetate Monomer — Specification (First Revision)
1
------
93
IS 1235 : 2023 Acetic anhydride - Specification (Second Revision)
2
Methods of tests
94
IS 12492 : 2025 Thermoplastics Hoses (Textile Reinforced) for Compressed Air — Specification (Second Revision)
2
------
95
IS 12540 : 2023 Acrylonitrile - Specification (First Revision)
1
Product Specification
96
IS 12585 : 2023 Specification for thermoplastic hoses (Textile Reinforced) for water - general purpose (First Revision)
1
Product Specification
97
IS 12618 : 2023 6-Chloro-2- Aminophenol-4-Sulphonic Acid Technical - Specification (First Revision)
1
------
98
IS 12628 : 2023 2 - Amino - 4 - Nitrophenol, technical - Specification First Revision
1
------
99
IS 12724 : 2004 Flexible pouches for packing of refined edible oils up to 5 kg or 5 litre - Specification (First Revision)
1
Product Specification
100
IS 12770 : 2025 Coal for Cement Manufacture - Specification (First Revision)
1
------
101
IS 12790 : 1999 Non - Soap grease - Specification (First Revision)
1
Product Specification
102
IS 12844 : 2025 Vinyl Pyridine Latex — Specification
1
------
103
IS 12887 : 2025 POLY (ETHYLENE TEREPHTHALATE) (PET) BOTTLES FOR PACKAGING OF EDIBLE OILS - SPECIFICATION (FIRST REVISION)
1
------
104
IS 12891 : 2021 Determination of fusibility of ash from coal, coke and lignite (First Revision)
1
Methods of tests
105
IS 1300 : 1994 Phenolic moulding materials - Specification (Third Revision)
3
Product Specification
106
IS 13055 : 2024 Methods of sampling and test for anaerobic adhesives and sealants (First Revision)
1
------
107
IS 13071 : 2024 Wire Reinforced Rubber Hose for Sand and Gravel Suction and Discharge Services — Specification (First Revision)
1
------
108
IS 13123 : 2000 Packing of liquid pesticides - Polyethylene terephthalate (PET) bottles (Up To 5 Litres Capacity) - Specification (First Revision)
1
Product Specification
109
IS 13123 : 2025 POLY ETHYLENE TEREPHTHALATE PET BOTTLES FOR PACKAGING OF LIQUID PESTICIDES UP TO 5 LITRES CAPACITY SPECIFICATION
2
------
110
IS 13193 : 2025 THERMOPLASTIC POLYESTERS (PET AND PBT) FOR MOULDING AND EXTRUSION - SPECIFICATION (First Revision)
1
------
111
IS 13289 : 2023 Polypropylene/Impact Copolymer (PPCP) Crates for Milk Pouches — Specification (First Revision)
1
Methods of tests
112
IS 13360 : Part 6 : Sec 18 : 2013 Plastics - Methods of testing: Part 6 thermal properties section 18 determination of temperature of deflection under load - High - Strength thermosetting laminates and long - Fibre - Reinforced plastics (First Revision)
1
Methods of tests
113
IS 13360 : Part 2 : Sec 3 : 2019 Plastics ? Methods of Testing Part 2 Sampling and Preparation of Test Specimens Section 3 Injection moulding of test specimens of thermoplastic materials - General principles and moulding of multipurpose and bar test specimens ( First Revision )
1
Methods of tests
114
IS 13360 : Part 5 : Sec 11 : 2013 Plastics - Methods of testing: Part 5 mechanical properties section 11 determination of indentation hardness by means of durometer (Shore Hardness) (First Revision)
1
Methods of tests
115
IS 13360 : Part 2 : Sec 2 : 2013 Plastics - Methods of testing: Part 2 sampling and preparation of test specimens Section 2 compression moulding of test specimens of thermosetting materials (First Revision)
1
Methods of tests
116
IS 13360 : Part 2 : Sec 5 : 2018 Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 5 multipurpose test specimens (Second Revision)
2
Methods of tests
117
IS 13360 : Part 3 : Sec 5 : 2013 Plastics - Methods of testing: Part 3 physical and dimensional properties section 5 thermosetting moulding materials - Determination of shrinkage (First Revision)
1
Methods of tests
118
IS 13360 : Part 11 : Sec 7 : 2018 Plastics - Methods of testing: Part 11 special properties section 7 determination of matter extractable by organic solvents (Conventional Method) (First Revision)
1
Methods of tests
119
IS 13360 : Part 4 : Sec 1 : 2000 Plastics - Methods of testing: Part 4 rheological properties section 1 determination of the melt mass - Flow rate (Mfj3)And the melt volume - Flow rate (Mvr) of thermoplastics (First Revision)
1
Methods of tests
120
IS 13360 : Part 5 : Sec 10 : 2018 Plastics - Methods of testing: Part 5 mechanical properties section 10 determination of tear resistance of plastics films and sheeting - Trouser tear method (First Revision)
1
Methods of tests
121
IS 13360 : Part 5 : Sec 12 : 2017 Plastics - Methods of testing: Part 5 mechanical properties section 12 determination of hardness - Ball indentation method (First Revision)
1
Methods of tests
122
IS 13360 : Part 5 : Sec 2 : 2017 Plastics - Methods of testing: Part 5 mechanical properties section 2 determination of tensile properties - Test conditions for moulding and extrusion plastics (First Revision)
1
Methods of tests
123
IS 13360 : Part 5 : Sec 22 : 2017 Plastics - Methods of testing: Part 5 mechanical properties section 22 determination of resistance to wear by abrasive wheels (First Revision)
1
Methods of tests
124
IS 13360 : Part 5 : Sec 5 : 2017 Plastics - Methods of testing: Part 5 mechanical properties section 5 determination of charpy impact properties - Non - Instrumented impact test (First Revision)
1
Methods of tests
125
IS 13360 : Part 6 : Sec 19 : 2019 Plastics ? Methods of Testing Part 6 Thermal Properties Section 19 Flammability by oxygen index ? Ambient temperature test ( First Revision )
1
Methods of tests
126
IS 13360 : Part 6 : Sec 20 : 2019 Plastics ? Methods of Testing Part 6 Thermal Properties Section 20 Flammability by oxygen index ? Elevated temperature test ( First Revision )
1
Methods of tests
127
IS 13360 : Part 6 : Sec 6 : 2019 Plastics ? Methods of Testing Part 6 Thermal Properties Section 6 Flammability by oxygen index ? General requirements ( Second Revision )
2
Methods of tests
128
IS 13360 : Part 8 : Sec 11 : 2018 Plastics - Methods of testing: Part 8 performance/chemical properties section 11 determination of environmental stress cracking (Esc) - Constant - Tensile load method (First Revision)
1
Methods of tests
129
IS 13360 : Part 8 : Sec 3 : 2018 Plastics - Methods of testing: Part 8 permanence / chemical properties section 3 determination of the effects of the immersion in liquid chemicals (First Revision)
1
Methods of tests
130
IS 13360 : Part 8 : Sec 4 : 2018 Plastics - Methods of testing: Part 8 permanece/chemical properties section 4 determination of loss of plasticizers - Activated carbon method (First Revision)
1
Methods of tests
131
IS 13360 : Part 8 : Sec 5 : 2019 Plastics — Methods of testing Part 8 Permanence / Chemical Properties Section 5 Determination of migration of plasticizers ( First Revision )
1
Methods of tests
132
IS 13360 : Part 6 : Sec 17 : 2017 Plastics - Methods of testing: Part 6 thermal properties section 17 determination of temperature of deflection under load - Plastics and ebonite (Second Revision)
2
Methods of tests
133
IS 13360 : Part 8 : Sec 14 : 2018 Plastics - Methods of testing: Part 8 performance/chemical properties section 14 determination of the effects of exposure to damp heat, water spray and salt mist (First Revision)
1
Methods of tests
134
IS 13360 : Part 5 : Sec 4 : 2021 Plastics - Methods of Testing Part 5 : Mechanical Properties Sec 4 Determination of Izod Impact Strength
1
Dimensions
135
IS 13360 : Part 8 : Sec 8 : 2021 Plastics Methods of testing Part 8 Permanencechemical properties Section 8 Determination of Ash General Methods First Revision
2
Dimensions
136
IS 13360 : Part 8 : Sec 13 : 2021 Plastics Methods Of Testing Part 8 Permanence chemical Properties Section 13 Determination of Changes in Colour and Variations in Properties After Exposure to Daylight Under Glass Natural Weathering or Laboratory Light Sources First Revision of IS 1
2
Safety Standard
137
IS 13360 : Part 2 : Sec 7 : 2021 Plastics - Methods of testing: Part 2 Sampling and preparation of test specimens Section 7 Injection moulding of test specimens of thermoplastic materials - Small plates (Third Revision)
3
Others
138
IS 13360 : Part 2 : Sec 9 : 2021 PLASTICS - Methods of Testing: Part 2 Sampling and Preparation of Test Specimens Section 9 Injection Moulding of Test Specimens of Thermoplastic Materials - Small Tensile Bars First Revision
1
Others
139
IS 13360 : Part 5 : Sec 1 : 2021 Plastics - Methods of testing: Part 5 Mechanical properties Section 1 Determination of tensile properties - General requirements Second Revision
2
Methods of tests
140
IS 13360 : Part 3 : Sec 11 : 2021 Plastics Methods of Testing: Part 3 Physical and Dimensional Properties Section 11 Determination of Density of Non-cellular Plastics Density Gradient Column Method First Revision
1
Product Specification
141
IS 13360 : Part 3 : Sec 10 : 2021 Plastics Methods of Testing Part: 3 Physical and Dimensional Properties Section 10 Determination of Density of Non-cellular Plastics Immersion Method Liquid Pyknometer Method and Titration Method First Revision
1
Product Specification
142
IS 13360 : Part 2 : Sec 4 : 2021 Plastics - Methods of testing: Part 2 Sampling and preparation of test specimens Section 4 Preparation of test specimens by machining Second Revision
1
Others
143
IS 13360 : Part 8 : Sec 1 : 2022 Plastics Methods of Testing Part 8 PermanenceChemical Properties Section 1 Determination of Water Absorption First Revision
2
Methods of tests
144
IS 13360 : Part 5 : Sec 7 : 2022 PLASTICS METHOD OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 7 DETERMINATION OF FLEXURAL PROPERTIES
2
Methods of tests
145
IS 13360 : Part 5 : Sec 3 : 2022 PLASTICS METHOD OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 3 DETERMINATION OF TENSILE PROPERTIES TEST CONDITIONS FOR FILMS AND SHEETS
2
Code of Practice
146
IS 13360 : Part 11 : Sec 15 : 2022 PLASTICS - METHODS OF TESTING PART 11 SPECIAL PROPERTIES Section 15 Determination of Viscosity using a Falling-Ball Viscometer Inclined-tube method
1
Methods of tests
147
IS 13360 : Part 8 : Sec 9 : 2022 PLASTICS - METHODS OF TESTING PART 8 PERMANENCECHEMICAL PROPERTIES SECTION 9 DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC BENT STRIP METHOD
1
Methods of tests
148
IS 13360 : Part 4 : Sec 5 : 2022 Plastics - Methods of Testing: Part 4 Rheological Properties Section 5 Determination of the Fluidity of Plastics Using Capillary and Slit - Die Rheometers First Revision
1
Product Specification
149
IS 13360 : Part 11 : Sec 3 : 2022 PLASTICS METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 3 FILM AND SHEETING DETERMINATION OF BLOCKING RESISTANCE
1
Code of Practice
150
IS 13360 : Part 6 : Sec 3 : 2022 PLASTICS METHOD OF TESTING PART 6 THERMAL PROPERTIES SECTION 3 DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD GENERAL TEST METHOD
3
Others
151
IS 13360 : Part 11 : Sec 10 : 2022 PLASTICS - METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 10 RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS DETERMINATION OF APPARENT VISCOSITY USING A SINGULAR CYLINDER TYPE ROTATIONAL VISCOMETER METHOD
1
Others
152
IS 13360 : Part 6 : Sec 10 : 2023 PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 10 DETERMINATION OF MELTING BEHAVIOUR MELTING TEMPERATURE OR MELTING RANGE OF SEMI-CRYSTALLINE POLYMERS BY CAPILLARY TUBE AND POLARIZING - MICROSCOPE METHODS
2
------
153
IS 13360 : Part 6 : Sec 21 : 2023 PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 21 DETERMINATION OF IGNITION TEMPERATURE USING A HOT-AIR FURNACE
1
------
154
IS 13360 : Part 7 : Sec 1 : 2023 PLASTICS METHODS OF TESTING PART 7 ELECTRICAL PROPERTIES SECTION 1 MEASUREMENT OF RESISTIVITY OF CONDUCTIVE PLASTICS
1
------
155
IS 13360 : Part 5 : Sec 26 : 2023 PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 26 DETERMINATION OF TENSILE PROPERTIES TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES
2
------
156
IS 13360 : Part 9 : Sec 7 : 2023 PLASTICS METHODS OF TESTING PART 9 OPTICAL PROPERTIES Section 7 Determination of Specular Gloss of Plastic Films and Solid Plastics
1
------
157
IS 13360 : Part 9 : Sec 8 : 2023 PLASTICS METHODS OF TESTING PART 9 OPTICAL PROPERTIES Section 8 Determination of Transparency of Plastic Sheeting
1
------
158
IS 13360 : Part 11 : Sec 9 : 2023 PLASTICS METHODS OF TEST PART 11 SPECIAL PROPERTIES SECTION 9 DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS GENERAL PRINCIPLES
2
------
159
IS 13360 : Part 6 : Sec 24 : 2024 Plastics — Methods of Testing Part 6 Thermal Properties Section 24 Cellular Plastics — Determination of Horizontal Burning Characteristics of Small Specimens Subjected to a Small Flame (First Revision)
1
------
160
IS 13360 : Part 1 : 2025 Plastics - Methods of Testing Part 1 Introduction (First Revision)
1
------
161
IS 13360 : Part 2 : Sec 1 : 2025 PLASTICS - METHODS OF TESTING PART 2 SAMPLING AND PREPARATION OF TEST SPECIMENS SECTION 1 PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS (Second Revision)
2
------
162
IS 13360 : Part 3 : Sec 4 : 2025 PLASTICS - METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES SECTION 4 DETERMINATION OF BULK FACTOR OF MOULDING MATERIALS (First Revision)
1
------
163
IS 13360 : Part 6 : Sec 9 : 2025 Plastics - Methods of Testing Part 6 Thermal Properties Section 9 Determination of Density of Smoke from the Burning or Decomposition of Plastics (First Revision)
1
------
164
IS 13360 : Part 9 : Sec 9 : 2025 PLASTICS � METHODS OF TESTING PART 9 OPTICAL PROPERTIES SECTION 9 DETERMINATION OF YELLOW INDEX AND CHANGE IN YELLOWNESS INDEX (First Revision)
1
------
165
IS 13360 : Part 5 : Sec 5 : SubSec 2 : 2025 Plastics — Methods of Testing Part 5 Mechanical Properties Section 5 Determination of Charpy Impact Properties Sub-section 2 Instrumented Impact Test ( Second Revision )
2
------
166
IS 13360 : Part 6 : Sec 1 : 2025 PLASTICS - METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 1 DETERMINATION OF VICAT SOFTENING TEMPERATURE OF THERMOPLASTIC MATERIALS (Third Revision)
3
------
167
IS 13360 : Part 8 : Sec 6 : SubSec 2 : 2025 PLASTICS - METHODS OF TESTING PART 8 PERMANENCE/CHEMICAL PROPERTIES SECTION 6 FILM AND SHEETING - DETERMINATION OF GAS-TRANSMISSION RATE SUB-SECTION 2 EQUAL-PRESSURE METHOD (First Revision)
1
------
168
IS 13360 : Part 4 : Sec 1 : SubSec 1 : 2025 Plastics � Methods of Testing Part 4 Rheological Properties Section 1 Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics Sub-section 1 Standard Method (Third Revision)
1
------
169
IS 13360 (Part 5/Sec 14) : 2026 PLASTICS — METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 14 DETERMINATION OF INDENTATION HARDNESS OF RIGID PLASTIC BY BARCOL IMPRESSOR (First Revision)
1
------
170
IS 13360 (Part 3/Sec 3) : 2026 PLASTICS — METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES Section 3 Determination of Apparent Density of moulding Material that cannot be Poured from a Specified Funnel (First Revision)
1
------
171
IS 13360 (Part 3/Sec 7) : 2026 PLASTICS — METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES Section 7 Liquid Resins — Determination of Density by the Pyknometer Method (First Revision)
1
------
172
IS 13360 (Part 4/Sec 2) : 2026 Plastics - Methods of testing Part 4 Rheological Properties Section 2 Cup Flow of Phenolic and Alkyd Moulding Materials (First Revision)
1
------
173
IS 13360 (Part 11/Sec 11/Sub-Sec 1) : 2026 PLASTICS — METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 11 RHEOLOGY SUBSECTION 1 VOCABULARY AND SYMBOLS FOR ROTATIONAL AND OSCILLATORY RHEOMETRY (First Revision)
1
------
174
IS 13360 (Part 11/Sec 11/Sub-Sec 2) : 2026 PLASTICS — METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 11 RHEOLOGY SUBSECTION 2 GENERAL PRINCIPLES OF ROTATIONAL AND OSCILLATORY RHEOMETRY (First Revision)
1
------
175
IS 13360 (Part 5/Sec 5/Sub-Sec 1) : 2025 PLASTICS — METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 5 DETERMINATION OF CHARPY IMPACT PROPERTIES SUBSEC 1 NON-INSTRUMENTED IMPACT TEST (Second Revision)
2
------
176
IS 13360 (Part 3/Sec 2) : 2025 PLASTICS — METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES Section 2 Determination of Apparent Density of Material that Can be Poured from a Specified Funnel (First Revision)
1
------
177
IS 13360 (Part 3/Sec 9) : 2026 PLASTICS METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES Section 9 Determination of Moisture First Revision
1
------
178
IS 13463 : 2022 Polyamide 6 materials for moulding and extrusion - Specification (First Revision)
1
Terminology
179
IS 1350 : Part 5 : 2017 Methods of test for coal and coke : Part 5 determination of special impurities (carbon present as carbonate, chlorine and phosphorus) (Second Revision)
2
Methods of tests
180
IS 1350 : Part 2 : 2022 Method of test for coal and coke : Part 2 determination of gross calorific value (Third Revision)
3
Product Specification
181
IS 1350 : Part 3 : 2022 Methods of test for coal and coke : Part 3 determination of total sulphur - Eschka method (Second Revision)
2
Product Specification
182
IS 1350 : Part 4 : Sec 1 : 2024 Coal and coke - Methods of test : Part 4 ultimate analysis, Section 1 determination of carbon and hydrogen (Second Revision)
2
------
183
IS 1350 : Part 1 : 2025 Coal and Coke - Methods of Test Part 1 Proximate Analysis (Third Revision)
3
------
184
IS 1350 : Part 4 : Sec 2 : 2025 Coal and Coke - Methods of Test Part 4 Ultimate Analysis Section 2 Determination of Nitrogen (Second Revision)
2
------
185
IS 1353 : Part 1 : 2018 Method of test for coal carbonization : Part 1 determination of the crucible swelling number (Second Revision)
2
Methods of tests
186
IS 1354 : 2024 Coke - Methods of test - Special tests (Third Revision)
3
------
187
IS 1355 : 2025 Coal and Coke - Determination of chemical composition of ash (Second Revision)
2
------
188
IS 13656 : 2019 Internal combustion engine crankcase oils for automotive application (Diesel And Gasoline) - Specification (Third Revision)
3
Product Specification
189
IS 13796 : 2004 Molybdenum disulphide powder for lubricants - Specification (First Revision)
1
Product Specification
190
IS 13797 : 2021 Molybdenum Disulphide Dispersion in Oil - Specification (first revision)
1
Product Specification
191
IS 13810 : 2023 Code of practice for float and sink analysis of coal (First Revision)
1
Product Specification
192
IS 13833 : 2019 Microcrystalline Wax Derived From Petroleum — Specification ( First Revision )
1
Product Specification
193
IS 13841 : 2025 5-SULPHOANTHRANILIC ACID - SPECIFICATION
1
------
194
IS 13842 : 2023 m-Ureidoaniline, technical - Specification (First Revision)
1
------
195
IS 13867 : 2021 Rubber - General Procedures for Preparing and Conditioning Test Pieces for Physical Test Methods ( First Revision )
1
Methods of tests
196
IS 13913 : 2020 Molybdenum Disulphide, Paste ? Specification ( First Revision )
1
Product Specification
197
IS 14127 : 2026 INSOLUBLE AMORPHOUS SULPHUR FOR RUBBER INDUSTRY SPECIFICATION
1
------
198
IS 14234 : Part 1 : 2002 Lubricants for air - Cooled spark - Ignition engines - Specification: Part 1 two - Stroke spark - Ignition engines (First Revision)
1
Product Specification
199
IS 14385 : 2026 ALUMINIUM COLD ROLLING OILS - FOIL AND SHEET ROLLING SPECIFICATION First Revision of IS 14385
1
------
200
IS 14421 : 2026 PLASTICIZER ESTERS — SPECIFICATION (First Revision)
1
------
201
IS 14424 : 2018 Rubber threads - Specifications (First Revision)
1
Product Specification
202
IS 14424 : 2026 RUBBER THREADS SPECIFICATION
2
------
203
IS 14434 : 2023 Polycarbonate moulding and extrusion materials - Specification (First Revision)
1
Product Specification
204
IS 1447 : Part 2 : 2013 Methods of sampling of petroleum and its products [P : 2] liquefied petroleum gases - Method of sampling (Second Revision)
2
Others
205
IS 1447 : Part 1 : 2021 Methods of Sampling of Petroleum and its Products Part 1 Manual Sampling (Second Revision)
2
Process Specification
206
IS 1447 : Part 3 : 2021 Methods of sampling of petroleum and its products: Part 3 method of sampling of semi - Solid and solid petroleum products (Second Revision)
2
Others
207
IS 1447 : Part 4 : 2025 PETROLEUM AND ITS PRODUCTS - METHODS OF SAMPLING PART 4 SAMPLING OF PETROLEUM COKE FOR LABORATORY ANALYSIS (Second Revision)
2
------
208
IS 1448 (Part 27) : 2018 Methods of test for petroleum and its products [P: 27] determination of knock characteristics of motor fuels - Research method (Second Revision) Amendment - 1
2
Methods of tests
209
IS 1448 : Part 30 : 2013 Methods of test for petroleum and its products [P : 30] crude petroleum and fuel oils - Determination of sediment - Extraction method (Second Revision)
2
Methods of tests
210
IS 1448 : Part 28 : 2008 Methods of test for petroleum and its products [P : 28] petroleum products - Determination of oxidation stability of gasoline - Induction period method (Fourth Revision)
4
Methods of tests
211
IS 1448 : Part 122 : 2013 Methods of test for petroleum and its products [p : 122] determination of carbon residue - Conradson method (First Revision)
1
Methods of tests
212
IS 1448 : Part 12 : 2013 Methods of test for petroleum and its products [P : 12] determination of colour (Astm Scale) (Second Revision)
2
Methods of tests
213
IS 1448 (Part 26) : 2018 Methods of test for petroleum and its products [P : 26] determination of knock characteristics of motor and aviation fuels - Motor method (Second Revision) Amendment - 1
2
Methods of tests
214
IS 1448 : Part 123 : 2013 Methods of test for petroleum and its products [p : 123] inhibited mineral turbine oils - Determination of oxidation stability (First Revision)
1
Methods of tests
215
IS 1448 : Part 135 : 2013 Methods of test for petroleum and its products [p : 135] crude petroleum - Determination of water - Distillation method (First Revision)
1
Methods of tests
216
IS 1448 : Part 44 : 2013 Methods of test for petroleum and its products [P : 44] determination of bromine number of distillates and aliphatic olefins - Electrometric method (Third Revision)
3
Methods of tests
217
IS 1448 : Part 56 : 2013 Methods of test for petroleum and its products [P : 56] calculation of viscosity index from kinematic viscosity (Third Revision)
3
Methods of tests
218
IS 1448 : Part 69 : 2019 Methods of Test for Petroleum and its Products [ P : 69 ] Determination of Flash and Fire Points - Cleveland Open Cup Method ( Second Revision )
2
Methods of tests
219
IS 1448 : Part 39 : 2012 Methods of test for petroleum and its products [P : 39] determination of vapour pressure - Reid method (Second Revision)
2
Methods of tests
220
IS 1448 : Part 1 : Sec 2 : 2002 Methods of test for petroleum and its products [P: 1/ Section 2] determination of base number of petroleum products by potentiometric titration (Second Revision)
2
Methods of tests
221
IS 1448 : Part 11 : 2004 Methods of test for petroleum and its products [P:11] petroleum products - Determination of freezing point of aviation fuels (Fourth Revision)
4
Methods of tests
222
IS 1448 : Part 114 : 2019 Methods of test for petroleum and its products [ p : 114 ] petroleum waxes - Determination of congealing point (First Revision)
1
Methods of tests
223
IS 1448 : Part 116 : 2018 Methods of test for petroleum and its products [ p : 116 ] determination of cone penetration of lubricating grease using one quarter and one half scale - Cone (Second Revision)
2
Methods of tests
224
IS 1448 : Part 118 : 2019 Methods of test for petroleum and its products [p : 118] naphthalene hydrocarbons in aviation turbine fuel by ultraviolet spectrophotometry (First Revision)
1
Methods of tests
225
IS 1448 : Part 128 : 2018 Methods of test for petroleum and its products [p : 128] determination of nickel in calcined petroleum coke (First Revision)
1
Methods of tests
226
IS 1448 : Part 129 : 2018 Methods of test for petroleum and its products [p : 129] determination of polymeric content in lubricating oils base stock (First Revision)
1
Methods of tests
227
IS 1448 : Part 130 : 2019 Methods of test for petroleum and its products [p : 130] determination of vibrated bulk density of calcined petroleum coke (First Revision)
1
Methods of tests
228
IS 1448 : Part 132 : 2018 Methods of Test for Petroleum and its Products: Part 132 Determination of Moisture Content in Raw and Calcined Petroleum Coke
1
Methods of tests
229
IS 1448 : Part 133 : 2018 Methods of test for petroleum and its products [p : 133] determination of real density of calcined petroleum coke (First Revision)
1
Methods of tests
230
IS 1448 : Part 134 : 2018 Methods of test for petroleum and its products [ p : 134 ] determination of volatile matter in raw and calcined petroleum coke (First Revision)
1
Methods of tests
231
IS 1448 : Part 14 : 2019 Methods of test for petroleum and its products [ P : 14 ] colour by saybolt chromometer (First Revision)
1
Methods of tests
232
IS 1448 : Part 141 : 2018 Methods of test for petroleum and its products [p : 141] determination of apparent density of calcined petroleum coke by helium method (First Revision)
1
Methods of tests
233
IS 1448 : Part 148 : 2019 Methods of test for petroleum and its products [p : 148] petroleum products - Aviation and distillate fuels - Determination of electrical conductivity (First Revision)
1
Methods of tests
234
IS 1448 : Part 149 : 2020 Methods of Test for Petroleum and its Products Part 149 Diesel Fuel - Assessment of Lubricity Using the High - Frequency Reciprocating Rig ( HFRR ) - Test Method ( Second Revision )
2
Methods of tests
235
IS 1448 : Part 15 : 2004 Methods of Test for Petroleum and Its Products - Part 15: Petroleum products - Corrosiveness to copper - Copper strip test
3
Methods of tests
236
IS 1448 : Part 16 : 2014 Methods of test for petroleum and its products [P : 16] crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (Fourth Revision)
4
Methods of tests
237
IS 1448 : Part 18 : 2020 Methods of test for petroleum and its products Part 18 distillation of petroleum products (Third Revision)
3
Methods of tests
238
IS 1448 : Part 19 : 2015 Methods of test for petroleum and its products [P : 19] detection of thiols and other sulphur species - Doctor test (Second Revision)
2
Methods of tests
239
IS 1448 : Part 2 : 2007 Methods of test for petroleum and its products [P:2] petroleum products and lubricants - Neutralization number - Potentiometric titration method (Second Revision)
2
Methods of tests
240
IS 1448 : Part 21 : 2019 Methods of test for petroleum and its products [P : 21] determination of flash point - Pensky - Martens closed cup method (Fourth Revision)
4
Methods of tests
241
IS 1448 : Part 22 : 2019 Methods of test for petroleum and its products [P : 22] determination of asphaltenes (Heptane Insolubles) in crude petroleum and petroleum products (Third Revision)
3
Methods of tests
242
IS 1448 : Part 23 : 2004 Methods of Test for Petroleum and its Products - P: 23 Liquefied Petroleum Gases - Determination of Hydrocarbon Types - Fluorescent Indicator Adsorption Method Fouth Revision
4
Methods of tests
243
IS 1448 : Part 3 : 2007 Methods of test for petroleum and its products [P:3] petroleum products and hydrocarbon solvents - Determination of aniline point and mixed aniline point (Third Revision)
3
Methods of tests
244
IS 1448 : Part 31 : 2017 Methods of test for petroleum and its products [P : 31] determination of smoke point (Second Revision)
2
Methods of tests
245
IS 1448 (Part 32) : 2019 Methods of test for petroleum and its products [ P : 32 ] crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary stoppered pyknometer and graduated bicapillary pyknometer methods (Third Revision) Amendment - 1
3
Methods of tests
246
IS 1448 : Part 40 : 2015 Methods of test for petroleum and its products [P: 40] petroleum products and bituminous materials - Determination of water - Distillation method (Fourth Revision)
4
Methods of tests
247
IS 1448 : Part 41 : 2019 Methods of test for petroleum and its products [ P : 41 ] crude petroleum - Determination of water and sediment - Centrifuge method (Fourth Revision)
4
Methods of tests
248
IS 1448 : Part 42 : 2015 Methods of test for petroleum and its products [P : 42] determination of the water reaction of aviation fuels (Third Revision)
3
Methods of tests
249
IS 1448 : Part 43 : 2018 Methods of test for petroleum and its products [P : 43] bromine number by colour indicator method (Third Revision)
3
Methods of tests
250
IS 1448 : Part 52 : 2017 Methods of test for petroleum and its products [P : 52] drop point (Second Revision)
2
Methods of tests
251
IS 1448 : Part 53 : 1979 Methods of test for petroleum and its products [P: 53] determination of acidity and alkalinity of greases (First Revision)
1
Methods of tests
252
IS 1448 : Part 54 : 2017 Methods of test for petroleum and its products [P : 54] determination of phosphorus content - Quinoline phosphomolybdate method (Third Revision)
3
Methods of tests
253
IS 1448 : Part 55 : Sec 2 : 2004 Methods of test for petroleum and its products [P : 55/section 2] saponifiable and unsaponifiable matter in oil fat and waxes (First Revision)
1
Methods of tests
254
IS 1448 : Part 58 : 1991 Methods of test for petroleum and its products [P: 58] determination of insolubles in greases (First Revision)
1
Methods of tests
255
IS 1448 : Part 59 : 1991 Methods of test for petroleum and its products [P:59] determination of mineral oil content in greases (Second Revision)
2
Methods of tests
256
IS 1448 : Part 65 : 2018 Methods of test for petroleum and its products [ P : 65 ] oxidation test for lubricating oils (Third Revision)
3
Methods of tests
257
IS 1448 : Part 67 : 2020 Methods of Test for Petroleum and its Products [ P : 67 ] Determination of Foaming Characteristics of Lubricating Oils ( Second Revision )
2
Methods of tests
258
IS 1448 : Part 7 : 2004 Methods of Test for Petroleum and its Products - Part 7: Determination of Calorific Value by Calculation
1
Methods of tests
259
IS 1448 : Part 70 : 2018 Methods of test for petroleum and its products [ P: 70 ] determination of residue in liquefied petroleum gases (First Revision)
1
Methods of tests
260
IS 1448 : Part 71 : 2004 Methods of Test for Petroleum and its Products ( P : 71 ) Liquefied Petroleum Gases - Determination of Gauge Vapour Pressure - LPG Method (Second Revision)
2
Methods of tests
261
IS 1448 : Part 73 : 2004 Methods of test for petroleum and its products [P: 73] liquefied petroleum gases - Detection of hydrogen sulphide - Lead acetate method (First Revision)
1
Methods of tests
262
IS 1448 : Part 76 : 2019 Methods of Test for Petroleum and its Products [ P : 76 ] Liquified Petroleum Gases and Light Hydrocarbons - Determination of Density or Relative Density - Pressure Hydrometer Method ( First Revision )
1
Methods of tests
263
IS 1448 : Part 8 : 2012 Methods of test for petroleum and its products [P : 8] determination of carbon residue - Ramsbottom method (Second Revision)
2
Methods of tests
264
IS 1448 : Part 82 : 2008 Methods of test for petroleum and its products ( P: 82 ) petroleum products - Determination of lead content of gasoline - Iodine monochloride method (First Revision)
1
Methods of tests
265
IS 1448 : Part 84 : 2017 Methods of test for petroleum and its products [ P : 84 ] determination of trace elements in petroleum products - Arsenic (First Revision)
1
Methods of tests
266
IS 1448 : Part 90 : 2008 Methods of test for petroleum and its products [p : 90] petroleum products and lubricants - Determination of water washout characteristics of lubricating greases (First Revision)
1
Methods of tests
267
IS 1448 : Part 91 : 2019 Methods of test for petroleum and its products [ p : 91 ] determination of water separability of petroleum oils and synthetic fluids (First Revision)
1
Methods of tests
268
IS 1448 : Part 94 : 2019 Methods of test for petroleum and its products [ p : 94 ] test for oxidation stability of lubricating grease by oxygen pressure vessel method (First Revision)
1
Methods of tests
269
IS 1448 : Part 95 : 2019 Methods of test for petroleum and its products [ p : 95 ] determination of demulsibility characteristics of lubricating oils (First Revision)
1
Methods of tests
270
IS 1448 : Part 96 : 2019 Methods of test for petroleum and its products [p : 96] petroleum products and lubricants - Petroleum oils and other fluids - Determination of rust - Preventing characteristics in the presence of water (First Revision)
1
Methods of tests
271
IS 1448 : Part 97 : 2015 Methods of test for petroleum and its products [p : 97] determination of thermal oxidation stability of gas turbine fuels - Jftot method (First Revision)
1
Methods of tests
272
IS 1448 : Part 142 : 2021 Determination of water separation characteristics of aviation turbine fuels by portable separometer
1
Code of Practice
273
IS 1448 : Part 50 : 2021 Methods of test for petroleum and its products: Part 50 Chlorine in new and used lubricants (sodium alcoholate method) (Third Revsion)
3
Product Specification
274
IS 1448 : Part 120 : 2021 Methods of test for petroleum and its products: Part 120 Zinc in lubricating oil
1
Code of Practice
275
IS 1448 : Part 29 : 2021 Methods of test for petroleum and its products Part 29 Petroleum products - Gum content of fuels - Jet evaporation method
4
Code of Practice
276
IS 1448 : Part 4 : Sec 1 : 2021 Methods of Test for Petroleum and its Products - Part 4/Section 1 Determination of Ash
3
Others
277
IS 1448 : Part 10 : Sec 2 : 2021 Methods of test for petroleum and its products Part 10 Petroleum and related products from natural or synthetic sources Section 2 Determination of pour point
3
Service Specification
278
IS 1448 : Part 4 : Sec 2 : 2021 Methods of test for petroleum and its products Part 4/Section 2 ash from grease sulphated ash and water soluble ash Fourth Revision
4
Others
279
IS 1448 : PART 10 : SEC 1 : 2021 Methods of test for petroleum and its products Part 10 Petroleum and related products from natural or synthetic sources Section 1 Determination of cloud point
3
Methods of tests
280
IS 1448 : Part 33 : 2021 Methods of test for petroleum and its products: Part 33 Sulphur by High Pressure Decomposition Device Method
3
Product Specification
281
IS 1448 : Part 29 : 2021 Methods of test for petroleum and its products Part 29 Petroleum products - Gum content of fuels - Jet evaporation method
4
Others
282
IS 1448 : Part 93 : 2021 Methods of test for Petroleum and its products P: 93 Determination of needle penetration (First Revision)
1
Methods of tests
283
IS 1448 : Part 170 : 2021 Methods of test for petroleum and its products Part 170 Petroleum and related products Determination of the extreme pressure and anti-wear properties of lubricants Four-ball method European conditions
1
Product Specification
284
IS 1448 : Part 139 : 2018 Methods of test for petroleum and its products [p : 139] determination of real density of calcined petroleum coke using butanol or toluene (First Revision)
1
Others
285
IS 1448 : Part 85 : 2022 Methods of Test for Petroleum and its Products Part 85 Oil Seperation on Storage of Greases ( First Revision )
1
Methods of tests
286
IS 1448 : Part 121 : 2022 Methods of test for petroleum and its products Part 121 Barium lubricating oil additive concentrates
1
Methods of tests
287
IS 1448 : Part 143 : 2022 Methods of test for petroleum and its products Part 143 Evaluation of white mineral oils by ultraviolet absorption spectroscopy
1
Methods of tests
288
IS 1448 : Part 74 : 2022 Methods of test for petroleum and its products Part 74 Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method
1
Methods of tests
289
IS 1448 : Part 145 : 2022 Methods of test for petroleum and its products Part 145 Determination of sodium nickel and vanadium in fuel oils and crude oils by atomic absorption spectroscopy (first revision)
1
Others
290
IS 1448 : Part 126 : 2023 Methods of test for petroleum and its products:: Part 126 determination of ash content in raw and calcined petroleum coke
1
Product Specification
291
IS 1448 : Part 61 : 2023 Methods of test for petroleum and its products Part 61 Determination of the leakage tendencies of automotive wheel bearing greases
2
Methods of tests
292
IS 1448 : Part 72 : 2023 Methods of test for petroleum and its products Part 72 volatility test of liquified petroleum gases ( First Revision )
1
Product Specification
293
IS 1448 : Part 89 : 2023 Methods of test for petroleum and its products Part 89 Test for thermal stability of lubricating greases
1
Product Specification
294
IS 1448 : Part 60 : 2023 Methods of test for petroleum and its products Part 60 Consistency of lubricating greases by cone penetrometer
3
Code of Practice
295
IS 1448 : Part 102 : 2023 Methods of test for petroleum and its products Part 102 Determination of air release value
1
------
296
IS 1448 : Part 51 : 2023 Methods of test for petroleum and its products Part 51 Copper strip corrosion test for lubricating greases
1
------
297
IS 1448 : Part 68 : 2023 Petroleum and its Products - Methods of Test Part 68 Determination of Evaporation Loss of Lubricating Greases (22 hour drying) (First Revision)
1
------
298
IS 1448 : Part 86 : 2023 PETROLEUM AND ITS PRODUCTS - METHODS OF TEST PART 86 DETERMINATION OF TOTAL BASE NUMBER BY THE POTENTIOMETRICAL PERCHLORIC ACID TITRATION METHOD (First Revision)
1
------
299
IS 1448 : Part 13 : 2023 Petroleum and its Products - Methods of Test Part 13 colour by lovibond tintometer
1
------
300
IS 1448 : Part 64 : 2023 Petroleum and its Products - Methods of Test Part 64 Nonvolatile Matter in Solvents (Second Revision)
2
------
301
IS 1448 : Part 9 : 2023 Petroleum and its Products - Methods of Test Part 9 Determination of the ignition quality of diesel fuels - Cetane engine method
3
------
302
IS 1448 : Part 66 : 2023 Petroleum and its Products -Methods of Test PART 66 FLASH POINT (OPEN) AND FIRE POINT BY MODIFIED PENSKY-MARTENS APPARATUS (First Revision)
1
------
303
IS 1448 : Part 110 : 2023 Petroleum and its Products - Methods of Test PART 110 COLD FILTER PLUGGING POINT OF DISTILLATE FUELS (First Revision)
1
------
304
IS 1448 : Part 138 : 2023 PETROLEUM AND ITS PRODUCTS - METHODS OF TEST PART 138 DETERMINATION OF SOAP CONTENT (Second Revision )
2
------
305
IS 1448 : Part 115 : 2023 Petroleum and its Products - Methods of Test PART 115 DETERMINATION OF SALT CONTENT IN CRUDE OIL
1
------
306
IS 1448 : Part 127 : 2024 PETROLEUM AND ITS PRODUCTS - METHODS OF TEST PART 127 DETERMINATION OF IRON IN PETROLEUM COKE
1
------
307
IS 1448 : Part 131 : 2024 PETROLEUM AND ITS PRODUCTS - METHODS OF TEST PART 131 DETERMINATION OF SILICON IN PETROLEUM COKE
1
------
308
IS 1448 : Part 79 : 2024 PETROLEUM AND ITS PRODUCTS - METHODS OF TEST PART 79 DETERMINATION OF VANADIUM AND NICKEL IN FURNACE OIL, CRUDE OIL AND THEIR RESIDUES - SPECTROPHOTOMETRIC METHOD (Second Revision)
2
------
309
IS 1448 : Part 20 : 2024 PETROLEUM AND ITS PRODUCTS - TEST METHODS PART 20 DETERMINATION OF FLASH POINT - ABEL CLOSED - CUP METHOD (Fourth Revision)
4
------
310
IS 1448 : Part 5 : 2025 PETROLEUM AND ITS PRODUCTS METHODS OF TEST PART 5 DETERMINATION OF KEROSENE BURNING CHARACTERISTICS 24 HOUR METHOD (Second Revision)
2
------
311
IS 1448 : Part 6 : 2025 PETROLEUM AND ITS PRODUCTS - METHODS OF TEST PART 6 DETERMINATION OF HEAT OF COMBUSTION OF LIQUID HYDROCARBON FUELS BY BOMB CALORIMETER ( Second Revision )
2
------
312
IS 1448 : Part 55 : Sec 1 : 2025 Petroleum and Its Products - Methods of Test Part 55 Saponification Value Section 1 Colour Indicator and Potentiometric Titration (Second Revision)
2
------
313
IS 1448 : Part 87 : 2025 PETROLEUM AND ITS PRODUCTS - METHODS OF TEST PART 87 AUTOIGNITION TEMPERATURE OF LIQUID PETROLEUM PRODUCTS (First Revision)
1
------
314
IS 1448 : Part 101 : 2025 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS PART 101 COLORIMETRIC DETERMINATION OF PHOSPHORUS IN LUBRICATING OILS
1
------
315
IS 1448 : Part 111 : 2025 PETROLEUM AND ITS PRODUCTS TEST METHODS PART 111 ANALYSIS OF LIQUEFIED PETROLEUM GASES (LPG) AND PROPYLENE CONCENTRATES BY GAS CHROMATOGRAPHY (First Revision)
1
------
316
IS 1448 : Part 34 : 2025 Petroleum and Its Products - Methods of Test Part 34 Determination of Sulphur In Petroleum Products (Lamp Method) (Third Revision)
3
------
317
IS 1448 : Part 25 : Sec 1 : 2025 Petroleum and its Products - Methods of Test Part 25 Transparent and Opaque Liquids Section 1 Determination of Kinematic Viscosity and Calculation of Dynamic Viscosity (Third Revision)
3
------
318
IS 1448 (Part 119) : 2025 PETROLEUM AND ITS PRODUCTS - METHODS OF TEST PART 119 DETERMINATION OF AROMATICS SPECIES AND TOTAL AROMATICS IN NAPHTHA, GASOLINE AND GASOLINE POOL COMPONENTS BY GAS CHROMATOGRAPHY (First Revision)
1
------
319
IS 1448 (Part 167) : 2026 Petroleum and its Products — Methods of Test Part 167 Determination of Density — Laboratory Density Meter with an Oscillating U-Tube Sensor (First Revision)
1
------
320
IS 1448 (Part 113) : 2026 PETROLEUM AND ITS PRODUCTS TEST METHODS PART: 113 DETERMINATIONS OF TOTAL ACIDITY IN AVIATION TURBINE FUEL
1
------
321
IS 1448 (Part 105) : 2026 PETROLEUM AND ITS PRODUCTS - TEST METHODS PART 105 ULTRAVIOLET UV ABSORBANCE AND ABSORPTIVITY OF PETROLEUM PRODUCTS FIRST REVISION
1
------
322
IS 1448 (Part 1/Sec 2) : 2026 PETROLEUM AND ITS PRODUCTS TEST METHODS PART 1 DETERMINATION OF BASE NUMBER OF PETROLEUM PRODUCTS SECTION 2 POTENTIOMETRIC TITRATION
3
------
323
IS 1448 (Part 149) : 2026 PETROLEUM PRODUCTS AND RELATED PRODUCTS PART 149 DIESEL FUEL — ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) — TEST METHOD (Third Revision)
3
------
324
IS 1448 (Part 97) : 2026 Methods of test for petroleum and its products [p : 97] determination of thermal oxidation stability of gas turbine fuels - Jftot method (First Revision)
2
------
325
IS 1448 (Part 186) : 2026 Petroleum Products and Related Products Determination of Kinematic Viscosity Method by Stabinger Type Viscometer
1
------
326
IS 1448 (Part 187) : 2026 Methods of test for Petroleum and its Products Part 187 Petroleum Products-Determination of Sulfated Ash in Lubricating Oils and Additives
1
------
327
IS 14504 : 2021 Natural Gas - Calculation of Calorific Values, Density, Relative Density and Wobbe Indices from Composition ( First Revision )
1
Methods of tests
328
IS 14507 : 2023 DIPHENYL ETHER SPECIFICATION
1
Code of Practice
329
IS 14534 : 2023 Plastics - Recovery and recycling of plastics waste - Guidelines (Second Revision)
2
Product Specification
330
IS 14537 : 2025 Poly (Ethylene Terephthalate) (PET) Bottles for Packaging of Alcoholic Beverages - Specification
1
------
331
IS 1459 : 2018 Kerosene - Specification (Fourth Revision)
4
Product Specification
332
IS 1460 : 2025 Automotive Diesel Fuel - Specification (seventh revision)
7
------
333
IS 1461 : 2024 Plastic buttons (Thermosetting) - Specification (Third Revision)
3
------
334
IS 14611 : 2024 Multilayered Cross Laminated Sheets/Tarpaulins/Covers/Agricultural Films — Specification (Second Revision)
2
------
335
IS 1462 : 2019 Talc for Cosmetic Industry — Specification ( Fourth Revision )
4
Product Specification
336
IS 14625 : 2015 Plastics Feeding Bottles (First Revision)
1
Product Specification
337
IS 1463 : 2020 Kaolin for Cosmetic Industry — Specification ( Fourth Revision )
4
Product Specification
338
IS 14635 (Part 1) : 2025 FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS PART 1 DESIGNATION SYSTEM (Second Revision)
2
------
339
IS 14635 (Part 2) : 2026 FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS PART 2 PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
1
------
340
IS 14648 : 2011 Microbiological examination of cosmetics and cosmetic raw materials - Methods of test (Second Revision)
2
Methods of tests
341
IS 14708 : 2025 Ethyl Acrylate - Specification (First Revision)
1
------
342
IS 14709 : 2025 n-Butyl Acrylate - Specification (First Revision)
1
------
343
IS 14764 : 2025 Poly (Ethylene Terephthalate) (PET) Containers for the Packaging of Solid and Semi-Solid Foods including Vanaspati - Specification (first revision)
1
------
344
IS 14788 : 2025 STYRENE-BUTADIENE RUBBER (SBR) EMULSION AND SOLUTION-POLYMERIZED TYPES -EVALUATION PROCEDURES ( Second Revision )
2
------
345
IS 14794 : 2022 ISOBUTENE-ISOPRENE RUBBER IIR EVALUATION PROCEDURES Third Revision
3
Product Specification
346
IS/ISO 14851 : 2022 Determination of the Ultimate Aerobic Biodegradability of Plastic Materials in an Aqueous Medium Method by Measuring the Oxygen Demand in A Closed respirometer First Revision
2
Product Specification
347
IS/ISO 14852 : 2021 Determination of the Ultimate Aerobic Biodegradability of Plastic Materials in an Aqueous Medium Method by Analysis of Evolved Carbon Dioxide First Revision
1
Product Specification
348
IS/ISO 14853 : 2016 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production
1
Methods of tests
349
IS/ISO 14855 : PART 1 : 2000 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide: Part 1 general method (First Revision)
1
Methods of tests
350
IS/ISO 14855 : PART 2 : 2018 DETERMINATION OF THE ULTIMATE AEROBIC BIODEGRADABILITY OF PLASTIC MATERIALS UNDER CONTROLLED COMPOSTING CONDITIONS METHOD BY ANALYSIS OF EVOLVED CARBON DIOXIDE PART 2 GRAVIMETRIC MEASUREMENT OF CARBON DIOXIDE EVOLVED IN A LABORATORY-SCALE TEST Fi
1
Product Specification
351
IS 14982 : 2022 Anti-stripping agents for bitumen addition - Specification (Second Revision) Amendment - 1
2
Methods of tests
352
IS 14995 : 2024 Stretch cling films - Specification (First Revision)
1
------
353
IS 15030 : 2022 Terephthalic acid - Specification (First Revision)
1
Methods of tests
354
IS 15070 : 2020 Oil of Black Pepper — Specification ( First Revision )
1
Product Specification
355
IS 15076 : 2018 Chloroprene Rubber CR - General Purpose Types Evaluation Procedure First Revision
1
Others
356
IS 15080 : 2022 6-Bromo-2,4-dinitroaniline, Technical - Specification (First Revision)
1
Methods of tests
357
IS 15081 : 2022 N N-Bishydroxyethyl-meta-chloroaniline, Technical - Specification (First Revision)
1
Product Specification
358
IS 15082 : 2022 N, N-bishydroxyethyl meta toluidine, Technical - Specification (First Revision)
2
Product Specification
359
IS 15125 : 2024 NATURAL GAS — GAS SAMPLING (First Revision)
1
------
360
IS 15127 : 2024 Natural Gas - Quality Designation ( First Revision)
1
------
361
IS 15130 (Part 1) : 2019 Natural Gas -Determination of Composition with Defined Uncertainty by Gas Chromatography Part 1 Guidelines for Tailored Analysis (First Revision) Amendment - 1
1
Methods of tests
362
IS 15130 : Part 2 : 2021 Natural Gas - Determination of Composition and Associated Uncertainty by Gas Chromatography Part 2 Uncertainty Calculations ( First Revision )
1
Methods of tests
363
IS 15130 : Part 5 : 2021 Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 5 : Determination of Nitrogen Carbon Dioxide and C1 to C5 and C6 Hydrocarbons for a Laboratory and On-line Process Application Using Three Columns
1
Product Specification
364
IS 15130 : Part 3 : 2021 NATURAL GAS DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY PART 3: PRECISION AND BIAS
1
Code of Practice
365
IS 15131 : 2020 2,6 Dibromo-4-Nitroaniline — Specification ( First Revision )
1
Product Specification
366
IS 15132 : 2025 ORTHO-CHLORO PARA-NITRO ANILINE SPECIFICATION
1
------
367
IS 15133 : 2025 2,6-Dichloro-4-Nitroaniline Specification
1
------
368
IS 15134 : 2023 2-Nitro-4-Methoxy Aniline Technical
1
Methods of tests
369
IS 15178 : 2025 Hydraulic Fluid Power — Fire-Resistant Fluids — Requirements and Guidelines for Use (Second Revision)
2
------
370
IS 15205 : 2026 AUTO-OXIDATION HAIR DYES/COLOURS ― SPECIFICATION
1
------
371
IS 15305 : Part 1 : 2019 Natural Gas - Calculation of Compression Factor Part 1 Introduction and Guidelines ( First Revision )
1
Others
372
IS 15305 : Part 2 : 2019 Natural Gas - Calculation of Compression Factor Part 2 Calculation Using Molar-Composition Analysis ( First Revision )
1
Methods of tests
373
IS 15305 (Part 3) : 2018 Natural gas - Calculation of compression factor: Part 3 calculation using physical properties (First Revision) Amendment - 1
1
Methods of tests
374
IS 15319 : 2020 Natural Gas - Organic Components Used as Odorants - Requirements and Test Methods ( First Revision )
1
Methods of tests
375
IS 15320 : Part 1 : 2012 Natural gas - Natural gas for use as a compressed fuel for vehicles: Part 1 designation of the quality (First Revision)
1
Others
376
IS 15355 : 2025 Rubber Hoses and Hose Assemblies for Liquefied Petroleum Gas (LPG) in Motor Vehicles - Specification (Second Revision)
2
------
377
IS 15356 : 2025 Acetaldehyde - Specification (First Revision)
1
------
378
IS 15410 : 2025 PLASTIC BOTTLES/CONTAINERS FOR PACKAGING OF NATURAL MINERAL WATER AND PACKAGED DRINKING WATER - SPECIFICATION (first revision)
1
------
379
IS 15430 : 2023 Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids (First Revision)
1
------
380
IS 15462 : 2019 Polymer modified bitumen (PMB) - Specification (First Revision) Amendment - 1
1
Product Specification
381
IS 15464 : 2022 ANHYDROUS ETHANOL FOR USE AS BLENDING COMPONENT IN MOTOR GASOLINE SPECIFICATION First Revision
1
Code of Practice
382
IS 15559 : 2025 POLYESTER PET STRAPPING SPECIFICATION
1
------
383
IS 15607 : 2022 Biodiesel B-100 - Fatty Acid Methyl Esters FAME Specification Second Revision
2
Product Specification
384
IS 15608 : 2018 Cream bleach - Specification (First Revision)
1
Product Specification
385
IS 15641 (Part 3) : 2026 Natural gas - Determination of water by karl fischer method: Part 3 coulometric procedure
1
------
386
IS 1571 : 2018 Aviation turbine fuels, kerosine type, jet - A - 1 - Specification (Tenth Revision)
10
Product Specification
387
IS 15770 : 2021 Heating Oil(LDO) - Specification
1
Safety Standard
388
IS 15799 : 2021 Methods for testing tar and bituminous materials - Ageing of bitumen (RTFO and PAV tests) (First Revision)
1
Product Specification
389
IS 1587 : 2017 Aviation turbine fuel, high flash point type - Specification (Fourth Revision)
4
Product Specification
390
IS 1589 : 1994 Oil, cylinder - Specification (First Revision)
1
Product Specification
391
IS 1593 : 2018 Fuel oils - Specification (Third Revision)
3
Product Specification
392
IS 1593 : 2026 FUEL OILS - SPECIFICATION
4
------
393
IS 15958 : 2023 Compressed Natural Gas (CNG) and Liquefied Natural Gas (LNG) for Automotive Purposes � Specification (First Revision)
1
------
394
IS/ISO 15985 : 2014 Plastics - Determination of the ultimate anaerobic biodegradation under high - Solids anaerobic - Digestion conditions - Method by analysis of released biogas (First Revision)
1
Methods of tests
395
IS 1604 : 2022 Aviation gasoline - Specification (fifth revision)
6
Product Specification
396
IS 16061 : 2021 HYDROGEN FUEL QUALITY PRODUCT SPECIFICATION
1
Methods of tests
397
IS 16061 : 2026 HYDROGEN FUEL QUALITY PRODUCT SPECIFICATION Second Revision of IS 16061
2
------
398
IS 16087 : 2025 Biogas Biomethane - Specification (Second Revision)
2
------
399
IS 16143 : Part 2 : 2021 Hard coal and coke - Mechanical sampling : Part 2 coal - Sampling from moving streams (First Revision)
1
Others
400
IS 16143 : Part 3 : 2021 Hard coal and coke - Mechanical sampling : Part 3 coal - Sampling from stationary lots (First Revision)
1
Methods of tests
401
IS 16143 : Part 5 : 2021 Hard coal and coke - Mechanical sampling : Part 5 coke - Sampling from moving streams (First Revision)
1
Methods of tests
402
IS 16143 : Part 7 : 2021 Hard coal and coke - Mechanical sampling : Part 7 methods for determining the precision of sampling, sample preparation and testing (First Revision)
1
Methods of tests
403
IS 16143 : Part 8 : 2021 Hard coal and coke - Mechanical sampling : Part 8 methods of testing for bias (First Revision)
1
Product Specification
404
IS 16143 : Part 6 : 2021 Hard coal and coke - Mechanical sampling : Part 6 coke - preparation of test samples (First Revision)
1
Product Specification
405
IS 16143 : Part 1 : 2021 Hard coal and coke - Mechanical sampling : Part 1 general introduction (First Revision)
1
Product Specification
406
IS 16143 : Part 4 : 2021 Hard coal and coke - Mechanical sampling : Part 4 coal - preparation of test samples (First Revision)
1
Methods of tests
407
IS 1615 : 1996 Oil of himalayan cedarwood - Specification (Second Revision)
2
Product Specification
408
IS 16204 : 2023 Rubber and plastics hoses and hose assemblies — Vocabulary (First Revision)
1
Others
409
IS 16210 : 2018 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance (First Revision)
1
Code of Practice
410
IS 1628 : 1986 AMENDMENT NO. 1 TO IS 1628 : 1986 SPECIFICATION FOR AXLE OIL (Second Revision)
2
Product Specification
411
IS 16460 : 2023 Plastics - Film and sheeting - Biaxially oriented polypropylene (pp) films (First Revision)
1
------
412
IS 16531 : 2022 Biodiesel Diesel Fuel Blend B8 to B20 Specification First Revision of IS 16531
1
Others
413
IS 16610 : 2022 Coal - Determination of plastic properties - Constant-torque gieseler plastometer method (First Revision)
1
Product Specification
414
IS 16611 : 2022 Hard coal - Sampling of slurries (First Revision)
1
Code of Practice
415
IS 16616 : 2022 Hard coal - Audibert-arnu dilatometer test (First Revision)
1
Product Specification
416
IS 16630 : Part 2 : 2024 PLASTICS RECYCLATES FROM POST-CONSUMER BOTTLES AND OTHER FORMS OF POLY(ETHYLENE TEREPHTHALATE) (PET) PART 2 PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (first revision)
1
------
417
IS 16630 : Part 1 : 2025 PLASTIC RECYCLATES FROM POST - CONSUMER BOTTLES AND OTHER FORMS OF POLY(ETHYLENE TEREPHTHALATE) (PET) PART 1 DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
1
------
418
IS 16634 : 2023 E85 FUEL ADMIXTURE OF ANHYDROUS ETHANOL AND MOTOR GASOLINE FOR FLEX FUEL POSITIVE IGNITION ENGINE POWERED VEHICLES SPECIFICATION
1
------
419
IS 16705 : 2025 RECLAIMED RUBBER DERIVED FROM PRODUCTS CONTAINING MAINLY NATURAL RUBBER EVALUATION PROCEDURE (First Revision)
1
------
420
IS 16713 : 2025 RECLAIMED ISOBUTENE-ISOPRENE IIR RUBBER EVALUATION PROCEDURE ( First Revision)
1
------
421
IS 1677 : 2018 Rubber hoses for agricultural spraying (Third Revision)
3
Terminology
422
IS 1683 : 2025 BARYTES FOR RUBBER INDUSTRY SPECIFICATION( Third Revision )
3
------
423
IS 1684 : 2025 RED OXIDE OF IRON FOR RUBBER INDUSTRY SPECIFICATION( Third Revision )
3
------
424
IS 1685 : 2025 WHITING FOR RUBBER INDUSTRY SPECIFICATION( Second Revision )
2
------
425
IS 16861 : 2026 HIGH FLASH HIGH SPEED DIESEL SPECIFICATION
1
------
426
IS/ISO 16929 : 2019 Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test First Revision
2
Product Specification
427
IS 170 : 2020 Acetone - Specification (Fifth Revision)
5
Product Specification
428
IS 17042 : Part 2 : 2020 Diesel Engines — NOx Reduction Agent Aus 32 Part 2 Test Methods ( First Revision )
1
Methods of tests
429
IS 17042 : Part 1 : 2020 Diesel Engines — NOx Reduction Agent AUS 32 Part 1 Quality Requirements ( First Revision )
1
Product Specification
430
IS 17077 : Part 1 : 2022 Plastics - Acrylonitrile-butadienestyrene (abs) moulding and extrusion materials : Part 1 designation system and specifications (First Revision)
1
Product Specification
431
IS/ISO 17088 : 2021 Compostable plastics - Specification (Second Revision)
2
Product Specification
432
IS 17138 : 2025 THERMOPLASTIC ELASTOMERS NOMENCLATURE AND ABBREVIATED TERMS ( First Revision )
1
------
433
IS 17370 : 2023 p-xylene - Specification (First Revision)
1
Process Specification
434
IS 17397 : Part 1 : 2022 Plastics - Thermoplastic polyurethanes for moulding and extrusion : Part 1 designation system and specifications (First Revision)
2
Methods of tests
435
IS 1741 : 2019 Latex foam rubber products - Specification (First Revision)
1
Product Specification
436
IS 17449 : 2022 Monomeric MDI (MMDI) and polymeric MDI (PMDI ) - Specification (First Revision)
2
Product Specification
437
IS 1745 : 2018 Petroleum hydrocarbon solvents - Specification (Third Revision)
3
Product Specification
438
IS 17494 : 2025 Cosmetics Sun Protection Test Methods-In vivo Determination of Sun Protection Factor SPF [ISO 24444:2019 MOD] (First Revision)
1
------
439
IS/ISO 17556 : 2019 Plastics Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved First Revision
2
Safety Standard
440
IS 1758 : 1986 Specification for jute batching oil (Second Revision)
2
Product Specification
441
IS 17655 : Part 1 : 2025 Solid Biofuels Determination of Moisture Content Part 1 Reference Method (First Revision )
1
------
442
IS 17655 : Part 3 : 2025 Solid Biofuels - Determination of Moisture Content Part 3 Moisture in General Analysis Sample (First Revision)
1
------
443
IS 1767 : 1980 Specification for dicalcium phosphate for dentifrice (Second Revision)
2
Product Specification
444
IS 1781 : 2022 Urea , technical - Specification (Second Revision)
2
Code of Practice
445
IS 17844 : 2025 Solid Biofuels - Determination of Volatile Matter ( First Revision)
1
------
446
IS 17899 T : 2024 Assessment of Biodegradability of Plastics in Varied Conditions (Revised)
1
------
447
IS 1799 : 1981 Specification for citral (First Revision)
1
Product Specification
448
IS 1800 : 1989 Perfumery material - Geraniol specification (Second Revision)
2
Product Specification
449
IS 1801 : 2016 Citronellol - Specification (Fourth Revision)
4
Product Specification
450
IS 1802 : 2005 Ionone - Specification (Third Revision)
3
Product Specification
451
IS 18250 : 2025 Synthetic Menthol - Specification (First Revision)
1
------
452
IS 1843 : 2023 Nylon monofilaments - Specification (First Revision)
1
------
453
IS 1867 : 2023 Rubber hot water bottles - Specification (Second Revision)
2
------
454
IS 18698 : 2026 DIMETHYL ETHER (DME) BLENDED LIQUEFIED PETROLEUM GAS (LPG) — SPECIFICATION
1
------
455
IS/ISO 20200 : 2015 Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory - Scale test (First Revision)
1
Methods of tests
456
IS 2036 : 1995 Phenolic laminated sheets - Specification (Second Revision)
2
Product Specification
457
IS 2046 : 1995 Decorative thermosetting synthetic resin bonded laminated sheets - Specification (Second Revision)
2
Product Specification
458
IS 2046 : Part 1 : 2025 Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets — Specification Part 1 Introduction and General Information ( Third Revision )
3
------
459
IS 2046 : Part 2 : 2025 Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets — Specification Part 2 Determination of Properties ( Third Revision )
3
------
460
IS 2046 : Part 3 : 2025 Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets Specification Part 3 Classification and Specifications for Laminates Less Than 2 mm Thick and Intended for Bonding to Supporting Substrates ( Third Revision )
3
------
461
IS 2046 : Part 4 : 2025 Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets — Specification Part 4 Classification and Specifications for Compact Laminates of Thickness 2 mm and Greater ( Third Revision )
3
------
462
IS 2046 : Part 5 : 2025 Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets — Specification Part 5 Classification and Specifications for Flooring Grade Laminates Less Than 2 mm Thick Intended for Bonding to Supporting Substrates ( Third Revision )
3
------
463
IS 2046 : Part 6 : 2025 Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets Specification Part 6 Classification and Specifications for Exterior-Grade Compact Laminates of Thickness 2 mm and Greater ( Third Revision )
3
------
464
IS 2046 : Part 7 : 2025 Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets — Specification Part 7 Classification and Specifications for Design Laminates ( Third Revision )
3
------
465
IS 2046 : Part 8 : 2025 Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets — Specification Part 8 Classification and Specifications for Alternative Core Laminates ( Third Revision )
3
------
466
IS 2076 : 1981 Specification for unsupported flexible polyvinyl chloride sheeting (First Revision)
1
Product Specification
467
IS 212 : 2021 Crude coal tar for general use (Third Revision)
7
Methods of tests
468
IS 216 : 2006 Coal tar pitch - Specification (Second Revision)
2
Product Specification
469
IS 217 : 2018 Cutback bitumen - Specification (Third Revision) Amendment - 2
3
Product Specification
470
IS 218 : 1983 Specification for creosote oil for use as wood preservatives (Second Revision)
2
Product Specification
471
IS 2221 : 2026 AMINOPLASTIC MOULDING MATERIALS - METHODS OF TEST (First Revision)
1
------
472
IS 2249 : 1984 Specification for adhesives (liquid) for leather-beltings (First Revision)
1
Product Specification
473
IS 2252 : 2018 Diacetone alcohol - Specification (Fourth Revision)
4
Product Specification
474
IS 2257 : 1989 Paper adhesives, liquid gum and office paste type - Specification (Third Revision)
3
Product Specification
475
IS 2267 : Part 1 : 2024 Polystyrene (ps) moulding and extrusion materials : Part 1 designation system and basis for specification (Third Revision)
3
------
476
IS 2284 : 1988 Method for olfactory assessment of natural and synthetic perfumery materials (First Revision)
1
Methods of tests
477
IS 229 : 2021 Ethyl acetate - Specification (Fourth Revision)
4
Product Specification
478
IS 2297 : 2025 GEAR LUBRICANTS, COMPOUNDED ― SPECIFICATION (Fourth Revision)
4
------
479
IS 230 : 2025 Normal Butyl Acetate - Specification (Third Revision)
3
------
480
IS 2302 : 1989 Tables for alcoholometry by hydrometer method (First Revision)
1
Others
481
IS 2396 : 2023 Rubber hoses and hose assemblies for measured fuel dispensing systems - Specification (Fifth Revision)
5
Methods of tests
482
IS 245 : 2020 Specification for trichloroethylene, technical (Fourth Revision)
4
Product Specification
483
IS 2508 : 2024 Polyethylene Films and Sheets — Specification (Fourth Revision)
4
------
484
IS 2519 : 1983 Specification for calcium stearate for cosmetic industry (Second Revision)
2
Product Specification
485
IS 2520 : 1984 Specil?ication for zinc stearate for cosmetic industry (Second Revision)
2
Product Specification
486
IS 2521 : 1984 Specificaiton for magnesium stearate for cosmetic industry (Second Revision)
2
Product Specification
487
IS 2528 : 1984 Specification for magnesium carbonate for cosmetic industry (Second Revision)
3
Product Specification
488
IS 2529 : 1983 Specification for magnesium oxide for cosmetic industry (Second Revision)
2
Product Specification
489
IS 2530 : 2026 POLYETHYLENE MOULDING MATERIALS AND POLYETHYLENE COMPOUNDS - METHODS OF TEST (First Revision)
1
------
490
IS 2543 : 1995 Cellulose secondary acetate materials for moulding and extrusion - Specification (First Revision)
1
Product Specification
491
IS 2560 : 1979 Specification for rubber-based adhesives for tubes, non-curing (First Revision)
1
Product Specification
492
IS 2562 : 1979 Specification for rubber-based adhesives for tyres and tubes, curing (First Revision)
1
Product Specification
493
IS 263 : 1990 Boric acid for cosmetic industry specification (Fifth Revision)
5
Product Specification
494
IS 2630 : 2021 Nitrobenzene - Specification (Third Revision)
3
Code of Practice
495
IS 2631 : 2020 Iso propyl alcohol - Specification (Second Revision)
2
Product Specification
496
IS 2632 : 2023 Crotonaldehyde - Specification (First Revision)
1
Code of Practice
497
IS 2664 : 2024 Quenching oil - Specification (Third Revision)
3
------
498
IS 2740 : 2022 Specification For Sulphanilic Acid, Technical (Third Revision)
3
Methods of tests
499
IS 2741 : 2022 Napthol - specification (fourth Revision)
4
Methods of tests
500
IS 2744 : 2022 1-Naphthylamine (Second Revision)
3
Product Specification
501
IS 2796 : 2017 Motor gasoline - Specification (Sixth Revision)
6
Product Specification
502
IS 2798 : 1998 Methods of test for plastics containers (First Revision)
1
Methods of tests
503
IS 2828 : 2019 Plastics - Vocabulary (Second Revision)
2
Terminology
504
IS 2833 : 2019 Aniline, technical - Specification (Second Revision)
2
Product Specification
505
IS 2850 : 1983 Specificaiton for zinc oxide for cosmetic industry (Second Revision)
2
Product Specification
506
IS 2851 : 1983 Specification for titanium dioxide for cosmetic industry (Second Retiision)
2
Product Specification
507
IS 2886 : 1991 Labelling paste for paper labels - Specification (First Revision)
1
Product Specification
508
IS 3065 : 2021 cutting oil neat
3
Methods of tests
509
IS 3098 : 1983 Specification for oil, hydraulic, mineral oil type (Second Revision)
2
Product Specification
510
IS 3116 : 2002 Sealing compound for lead - Acid bateries (Bitumen Based) - Specification (First Revision) Amendment - 2
1
Product Specification
511
IS 3117 : 2025 Bitumen emulsion for roads and allied applications (Anionic Type) - Specification (First Revision) Amendment - 1
1
Product Specification
512
IS 3123 : 2005 Hydroxycitronellal - Specification (Third Revision)
3
Product Specification
513
IS 3134 : 2025 Natural Menthol - Specification (Second Revision)
2
------
514
IS 3145 : 1986 SpecificatlOn for musk xylol (First Revision)
1
Product Specification
515
IS 3146 : 1991 Oil of celery seed - Specification (First Revision)
1
Product Specification
516
IS 3147 : 1992 Oil of dill seed - Specification (First Revision)
1
Product Specification
517
IS 3180 : 1984 Specification for linalyl acetate (First Revision)
1
Product Specification
518
IS 3229 : 2020 Naphthionic Acid ( Sodium Salt ) - Specification ( Third Revision )
3
Product Specification
519
IS 323 : 2009 Rectified spirit for industrial use - Specification (Second Revision)
2
Product Specification
520
IS 3241 : 1985 SpecificAtion for geranyl acetate (First Revision)
1
Product Specification
521
IS 3242 : 1989 Oxynaphthoic acid (Bon Acid) - Specification (First Revision)
1
Product Specification
522
IS 3250 : 2005 Methyl ionone - Specification (Third Revision)
3
Product Specification
523
IS 326 : Part 10 : 2005 Methods of sampling and test for natural and synthetic perfumery materials: Part 10 determination of residue on evaporation (Third Revision)
2
Methods of tests
524
IS 326 : Part 12 : 2005 Methods of sampling and test for natural and synthetic perfumery materials: Part 12 determination of phenols (Third Revision)
2
Methods of tests
525
IS 326 : Part 14 : 1985 Methods of sampling and test for natural and synthetic perfumery materials: Part 14 determination of heavy metals (Second Revision)
2
Methods of tests
526
IS 326 : Part 15 : 1984 Methods of sampling and test for natural and synthetic perfumery materials: Part 15 detection of petroleum and mineral oils (Second Revision)
2
Methods of tests
527
IS 326 : Part 16 : 1989 Natural and synthetic perfumery materlAls - Methods of sampling and test: Part 16 determination of melting point and melting range (Second Revision)
2
Methods of tests
528
IS 326 : Part 17 : 1989 Natural and synthetic perfumery materials - Methods of sampling and test: Part 17 detection of chlorine (Second Revision)
2
Methods of tests
529
IS 326 : Part 18 : 1984 Methods of sampling and test for natural and synthetic perfumery materials: Part 18 determination of freezing point (Second Revision)
2
Methods of tests
530
IS 326 : Part 20 : 1993 Natural and synthetic perfumery materials - Methods of sampling and test: Part 20 determination of boiling (Distillation) range (Second Revision)
2
Methods of tests
531
IS 326 : Part 3 : 2006 Methods of sampling and test for natural and synthetic perfumery materials: Part 3 determination of relative density (Third Revision)
3
Methods of tests
532
IS 326 : Part 5 : 2006 Methods of sampling and test for natural and synthetic perfumery materials: Part 5 determination of refractive index (Third Revision)
3
Methods of tests
533
IS 326 : Part 6 : 2005 Methods of sampling and test for natural and synthetic perfumery materials: Part 6 evaluation of miscibility in ethanol (Third Revision)
2
Methods of tests
534
IS 326 : Part 7 : 2006 Methods of sampling and test for natural and synthetic perfumery materials: Part 7 determination of acid value (Third Revision)
3
Methods of tests
535
IS 326 : Part 8 : 2005 Methods of sampling and test for natural and synthetic perfumery materials part8 determination of ester value (Third Revision)
2
Methods of tests
536
IS 326 : Part 13 : 2020 Methods of Sampling and Test for Natural and Synthetic Perfumery Materials Part 13 Determination of 1,8-Cineole Content ( Fourth Revision )
4
Methods of tests
537
IS 326 : Part 4 : 2005 Methods of sampling and test for natural and synthetic perfumery materials: Part 4 determination of optical rotation (Third Revision)
2
Methods of tests
538
IS 326 : Part 1 : 2022 Methods of sampling and test for natural and synthetic perfumery materials part 1 sampling fourth revision of is 326 part 1
4
Terminology
539
IS 326 : Part 2 : 2023 Natural and Synthetic Perfumery Materials � Methods of Sampling and Test Part 2 Preliminary Examination of Perfumery Materials and Samples ( Third Revision )
3
Code of Practice
540
IS 326 : Part 19 : 2023 Natural and Synthetic Perfumery Materials Methods of Sampling and Test Part 19 Gas Chromatographic Analysis of Perfumery Materials on Fused Silica Capillary Columns General Method [ISO 7609 : 1985, MOD] ( Second Revision )
1
Methods of tests
541
IS 327 : 1991 Oil of lemongrass - Specification (Second Revision)
2
Product Specification
542
IS 328 : 2022 OIL OF EUCALYPTUS GLOBULUS - SPECIFICATION
4
Product Specification
543
IS 329 : 2004 Oil of sandalwood - Specificaiton (Third Revision)
2
Product Specification
544
IS 3321 : 1973 Specification for formaldehyde solution (First Revision)
1
Product Specification
545
IS 334 : 2023 Glossary of terms relating to bitumen and tar (Fourth Revision)
4
Terminology
546
IS 3349 : 1989 Perfumery materials - Reslnoid benzoin, pure - Specification (First Revision)
1
Product Specification
547
IS 336 : 2021 Ether - Specification (Third Revision)
3
Safety Standard
548
IS 3389 : 1994 Urea-formaldehyde moulding materials - Specification (First Revision)
1
Product Specification
549
IS 3398 : 2003 Oil of patchouli - Specification (First Revision)
1
Product Specification
550
IS 3399 : 2013 Zinc oxide for rubber industry - Specification (Third Revision)
3
Product Specification
551
IS 3400 : Part 11 : 2021 Methods of Test for Vulcanized Rubber Part 11 Determination of Rebound Resilience (Second Revision)
2
Methods of tests
552
IS 3400 : Part 19 : 2020 Methods of Test for Vulcanized Rubbers Part 19 Permeability to Gases ( Constant Volume Method ) ( First Revision )
1
Methods of tests
553
IS 3400 : Part 4 : 2012 Methods of test for vulcanized rubber: Part 4 accelerated ageing and heat resistance (Third Revision)
3
Methods of tests
554
IS 3400 : Part 6 : 2018 Methods of Test for Vulcanized Rubbers Part 6 Determination of the Effect of Liquids (Fourth Revision)
4
Methods of tests
555
IS 3400 : Part 9 : 2020 Methods of Test for Vulcanized Rubber Part 9 Rubber, Vulcanized or Thermoplastic — Determination of Density ( Fourth Revision )
4
Methods of tests
556
IS 3400 : Part 21 : 2020 Methods of Test for Vulcanized Rubbers Part 21 Permeability to Gases — Constant Pressure Method ( First Revision )
1
Methods of tests
557
IS 3400 : Part 1 : 2021 Methods of Test for Vulcanized Rubber Part 1 Tensile Stress-Strain Properties
4
Methods of tests
558
IS 3400 : Part 7 : 2021 Methods of Test for Vulcanized Rubber Part 7: Determination of flex cracking and crack growth De Mattia
2
Product Specification
559
IS 3400 : Part 18 : 2021 Methods of Test for Vulcanized Rubbers - Part 18 : Stiffness at Low Temperature Gehman Test( Second Revision )
2
Methods of tests
560
IS 3400 : Part 24 : 2021 Methods for Test for Volcanized Rubbers - Part 24 Rubber and Plastics Hose - Determination of Adhesion Between Components
2
Code of Practice
561
IS 3400 : Part 3 : 2021 Methods of Test for Vulcanized Rubbers Part 3 Abrasion Resistance using a Rotating Cylindrical Drum Device ( Third Revision )
3
Code of Practice
562
IS 3400 : Part 13 : 2021 Methods of test for vulcanized rubbers: Part 13 Tension Set Second Revision
2
Service Specification
563
IS 3400 : Part 12 : 2022 Methods of test for vulcanized rubbers: Part 12 Tear strength-crescent test piece First Revision
1
Methods of tests
564
IS 3400 : Part 5 : 2022 METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 5 ADHESION OF RUBBERS TO TEXTILE FABRICS ( Fourth Revision )
5
Methods of tests
565
IS 3400 : Part 10 : Sec 2 : 2022 METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 10 COMPRESSION SET SECTION 2 AT LOW TEMPERATURES ( Third Revision )
2
Methods of tests
566
IS 3400 : Part 28 : 2022 METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 28 DETERMINATION OF STRESS RELAXATION IN COMPRESSION � TESTING AT CONSTANT TEMPERATURE ( First Revision )
2
Methods of tests
567
IS 3400 : Part 29 : 2022 METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 29 DETERMINATION OF AGEING CHARACTERISTICS BY MEASUREMENT OF STRESS RELAXATION IN TENSION ( First Revision )
1
Product Specification
568
IS 3400 : Part 25 : 2022 METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 25 DETERMINATION OF LOW-TEMPERATURE BRITTLENESS ( First Revision )
1
Code of Practice
569
IS 3400 : Part 15 : 2022 METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 15 DETERMINATION OF VOLUME AND/OR SURFACE RESISTIVITY ( First Revision )
1
Code of Practice
570
IS 3400 : Part 2 : Sec 2 : 2023 METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 2 HARDNESS BETWEEN 10 IRHD AND 100 IRHD ( Fifth Revision )
5
Code of Practice
571
IS 3400 : Part 10 : Sec 1 : 2022 METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 10 COMPRESSION SET SECTION 1 AT AMBIENT OR ELEVATED TEMPERATURES ( Third Revision )
3
Others
572
IS 3400 : Part 26 : 2025 Vulcanized Rubber - Methods of Test Part 26 Determination of Shear Modulus and Adhesion to Rigid Plates - Quadruple-Shear Methods ( First Revision )
1
------
573
IS 3400 : Part 20 : 2025 Vulcanized Rubber - Methods of Test Part 20 Resistance to ozone cracking - Static strain test (Third Revision) )
3
------
574
IS 3434 : 1984 Glossary of terms for adhesives and pressure sensitive adhesive tapes (First Revision)
1
Terminology
575
IS 3447 : 1993 Shellac jointing compound - Specification (First Revision)
1
Product Specification
576
IS 3470 : 2017 Hexane, food grade - Specification (Second Revision)
2
Product Specification
577
IS 3504 : 2006 Thymol - Specification (Third Revision) Amendment - 1
3
Product Specification
578
IS 3506 : 1989 Tables for alcoholometry (pyknometer method) (First Revision)
1
Others
579
IS 3549 : 2023 Rubber hoses and hose assemblies for water suction and discharge - Specification (Third Revision)
2
Product Specification
580
IS 3562 : 2025 p-NITROTOLUENE, TECHNICAL - SPECIFICATION (Second Revision)
1
------
581
IS 3565 : 2018 Teats for feeding bottles - Specification (First Revision)
1
Product Specification
582
IS 3584 : 2007 Camphor - Specification (Second Revision)
2
Product Specification
583
IS 361 : 2009 Normal butyl alcohol, technical - Specification (Third Revision)
3
Product Specification
584
IS 3660 Part 7 : 2013 Methods of Test for Natural Rubber Part 7 : Determination of Mooney Viscosity
3
Methods of tests
585
IS 3660 : Part 1 : 1999 Methods of test for natural rubber - Part 1 : determination of dirt (Third Revision)
3
Methods of tests
586
IS 3660 : Part 10 : 2000 Methods of test for natural rubber: Part 10 determination of nitrogen content [nr:11] (First Revision)
1
Methods of tests
587
IS 3660 : Part 2 : 1985 Methods of test for natural rubber - Part 2 : determination of volatile matter (Second Revision)
2
Methods of tests
588
IS 3660 : Part 4 : 2017 Methods of test for natural rubber: Part 4 determination of total copper - Photometric method [ nr : 4 ] (Third Revision)
3
Methods of tests
589
IS 3660 : Part 5 : 1989 Methods of test for natural rubber: Part 5 determination of manganese (Nr:5) (Second Revision)
2
Methods of tests
590
IS 3660 : Part 6 : 1988 Methods of test for natual rubber: Part 6 determination of rubber hydrocarbon [nr:7} (Second Revision)
2
Methods of tests
591
IS 3660 : Part 9 : 2016 Methods of test for natural rubber: Part 9 determination of solvent extract [ nr : 10 ] (Second Revision)
2
Methods of tests
592
IS 3660 : Part 11 : 2021 Methods of Test for Natural Rubber - Part 11 : Determination of Plasticity
2
Service Specification
593
IS 3660 : Part 12 : 2022 METHODS OF TEST FOR NATURAL RUBBER PART 12 DETERMINATION OF PLASTICITY RETENTION INDEX PRI NR : 13 Third Revision
3
Code of Practice
594
IS 3660 : Part 8 : 2023 METHODS OF TEST FOR NATURAL RUBBER PART 8 RUBBER TEST MIXES PREPARATION MIXING AND VULCANIZATION EQUIPMENT AND PROCEDURES NR : 9 Third Revision of IS 3600 Part 8
3
Product Specification
595
IS 3660 : Part 13 : 2023 METHODS OF TEST FOR NATURAL RUBBER PART 13 DETERMINATION OF COLOUR NR : 14 Second Revision of IS3660 Part 13
2
Product Specification
596
IS 3669 : 1994 Melamine-formaldehyde moulding materials - Specification (First Revision)
1
Product Specification
597
IS 3687 : 2025 General Purpose Pressure Sensitive Adhesive Cloth Tapes - Specification (Third Revision)
3
------
598
IS 3692 : 1975 Specification for rubber closures, pharmaceutical (First Revision)
1
Product Specification
599
IS 3708 : Part 1 : 2013 Methods of test for natural rubber latex: Part 1 determination of dry rubber content [nrl : 1] (Second Revision)
2
Methods of tests
600
IS 3708 : Part 11 : 2001 Methods of test for natural rubber latex: Part 11 determination of magnesium (Direct Titration Method) [nrl:18] (Second Revision)
2
Methods of tests
601
IS 3708 : Part 3 : 2018 Methods of test for natural rubber latex: Part 3 determination of density (Second Revision)
2
Methods of tests
602
IS 3708 : Part 8 : 2018 Methods of test for natural rubber latex: Part 8 rubber, raw natural and rubber latex, natural - Determination of nitrogen content (Third Revision)
3
Methods of tests
603
IS 3708 : Part 9 : 2018 Methods of test for natural rubber latex: Part 9 determination of total ash (Third Revision)
3
Methods of tests
604
IS 3708 : Part 7 : 2022 METHODS OF TEST FOR NATURAL RUBBER LATEX PART 7 DETERMINATION OF VOLATILE FATTY ACID NUMBER Third Revision
2
Safety Standard
605
IS 3708 : Part 5 : 2022 METHODS OF TEST FOR NATURAL RUBBER LATEX PART 5 DETERMINATION OF KOH NUMBER Fourth Revision
4
Code of Practice
606
IS 3708 : Part 10 : 2023 METHODS OF TEST FOR NATURAL RUBBER LATEX PART 10 NATURAL RUBBER LATEX CONCENTRATE DETERMINATION OF BORIC ACID CONTENT
2
Code of Practice
607
IS 3708 : Part 4 : 2023 METHODS OF TEST FOR NATURAL RUBBER LATEX PART 4 NATURAL RUBBER LATEX CONCENTRATE DETERMINATION OF ALKALINITY Fourth Revision
4
Methods of tests
608
IS 3708 : Part 2 : 2024 NATURAL RUBBER LATEX- METHODS OF TEST PART 2 DETERMINATION OF SLUDGE CONTENT ( Second Revision )
2
------
609
IS 3708 : Part 6 : 2024 NATURAL RUBBER LATEX- Methods of Test PART 6 DETERMINATION OF MECHANICAL STABILITY (second revision)
2
------
610
IS 3730 : 1988 Specification for high density polyethylene bucket (First Revision)
1
Product Specification
611
IS 3746 : 2018 Graphical symbols for coal preparation plant (Second Revision)
2
Others
612
IS 3810 : Part 1 : 2002 Solid mineral fuels - Vocabulary : Part 1 terms relating to coal preparation (Second Revision)
2
Terminology
613
IS 3810 : Part 2 : 2003 Solid mineral fuels - Vocabulary : Part 2 terms relating to sampling, testing and analysis (First Revision)
1
Terminology
614
IS 3810 : Part 3 : 2023 Glossary of terms relating to solid mineral fuels : Part 3 - Coke
1
Product Specification
615
IS 3858 : 2006 Benzyl acetate - Specification (Third Revision)
3
Product Specification
616
IS 3924 : 1980 Specification for benzyl alcohol (First Revision)
1
Product Specification
617
IS 3925 : 1980 Specification for eugenol (First Revision)
1
Product Specification
618
IS 3926 : 2024 Methyl Cinnamate — Specification (Second Revision)
2
------
619
IS 3927 : 1986 Specification for iso - Butyl phenyl acetate (First Revision)
1
Product Specification
620
IS 3928 : 1986 Specification for styralyl acetate (First Revision)
1
Product Specification
621
IS 3929 : 1984 Specification for amyl salicylate (First Revision)
1
Product Specification
622
IS 3958 : 2021 Methods Of Sampling Cosmetics
2
Product Specification
623
IS 3959 : 2023 SKIN POWDER - SPECIFICATION
3
------
624
IS 3986 : 1988 Specificaiton for sodium lauryl sulphate for cosmetic industry (Third Revision)
3
Product Specification
625
IS 3987 : 2006 Sorbitol solution (70 Percent) for cosmetic industry - Specification (Third Revision)
3
Product Specification
626
IS 3988 : 2023 Guar gum - Specification (Second Revision)
2
------
627
IS 4011 : 2018 Methods of test for safety evaluation of cosmetics (Third Revision)
3
Methods of tests
628
IS 4023 : 2022 Methods for the determination of coke reactivity index (CRI) and coke strength after reaction (CSR) (Second Revision)
2
Methods of tests
629
IS 4028 : 1992 Beeswax, bleached for cosmetic industry - Specification (Third Revision)
3
Product Specification
630
IS 408 : 2020 Grease No. 0, Graphited — Specification ( Third Revision )
3
Product Specification
631
IS 4105 : 2023 Styrene (vinyl benzene) - Specification (Third Revision)
3
Methods of tests
632
IS 4117 : 2024 Alcohol Denaturants - Specification (Third Revision)
3
------
633
IS 4135 : 1974 Specification for hospital rubber sheetings (First Revision)
1
Product Specification
634
IS 4149 : 2025 POST-MORTEM RUBBER GLOVES SPECIFICATION (First revision)
1
------
635
IS 4185 : 1989 Adhesive paper tapes - Specification (First Revision)
1
Product Specification
636
IS 4265 : 1975 4,4-Diaminostilbene-2,2-Disulphonic Acid(first revision)
1
Product Specification
637
IS 4272 : 2024 Vanillin — Specification (Second Revision)
2
------
638
IS 4273 : 1984 Specification for iso - Bornyl acetate (First Revision)
1
Product Specification
639
IS 4286 : 2024 Domestic Coke - Specification (Second Revision)
2
------
640
IS 4306 : 1987 Specification for hexamethylenetetramine (hexamine)(Second Revision)
2
Product Specification
641
IS 4311 : 2024 Coal - Determination of mineral matter (First Revision)
1
------
642
IS 4334 : 1985 Specification for 2 - Chloroaniline (First Revision)
1
Product Specification
643
IS 4335 : 1985 Specification for 3 - Chloroaniline (First Revision)
1
Product Specification
644
IS 4336 : 1985 Specification for 4 - Chloroaniline (First Revision)
1
Product Specification
645
IS 436 : Part 1 : Sec 1 : 2024 Methods for Sampling of Coal and Coke Part 1 Sampling of Coal Section 1 Manual Sampling (Second Revision)
2
------
646
IS 437 : 2020 Size analysis of coal and coke for marketing (Fourth Revision)
4
Dimensions
647
IS 439 : 2020 Industrial Coke - Specification (Fourth Revision)
4
Product Specification
648
IS 443 Part 1 : 2022 METHODS OF TEST FOR RUBBER AND PLASTICS � TUBING, HOSES AND HOSE ASSEMBLIES PART 1 RUBBER AND PLASTICS HOSES � ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS ( Fourth Revision )
4
Others
649
IS 443 : Part 6 : 2022 METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 6 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES HYDRAULIC PRESSURE IMPULSE TEST WITHOUT FLEXING First Revision
1
Code of Practice
650
IS 443 : Part 5 : 2022 METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 5 RUBBER AND PLASTICS HOSES DETERMINATION OF ABRASION OF LINING First Revision
1
Product Specification
651
IS 443 : Part 4 : 2022 METHODS OF TEST FOR RUBBER AND PLASTICS � TUBING, HOSES AND HOSE ASSEMBLIES PART 4 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES � DETERMINATION OF ELECTRICAL RESISTANCE AND CONDUCTIVITY ( Fourth Revision )
4
Code of Practice
652
IS 443 : Part 2 : 2023 METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 2 RUBBER AND PLASTICS HOSES DETERMINATION OF VOLUMETRIC EXPANSION
4
Code of Practice
653
IS 443 : Part 3 : 2023 METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 3 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES HYDROSTATIC TESTING
4
Methods of tests
654
IS 4433 : 1979 Method for determination of hardgrove grindability index of coal (First Revision)
1
Methods of tests
655
IS 444 : 2025 Rubber Hoses, Textile-Reinforced, for General-Purpose Water Applications - Specification (Sixth Revision)
6
------
656
IS 446 : 2025 RUBBER HOSES TEXTILE-REINFORCED FOR COMPRESSED AIR SPECIFICATION ( Sixth Revision )
6
------
657
IS 447 : 1988 Specification for rubber hose for welding (Fourth Revision)
4
Product Specification
658
IS 447 : 2026 RUBBER HOSES FOR WELDING SPECIFICATION
5
------
659
IS 4511 : Part 1 : 1986 Methods of test for styrene - Butadiene rubber (Sbr) latices: Part 1 determination of dry polymer content sbrl : 1 (First Revision)
1
Methods of tests
660
IS 4511 : Part 2 : 1986 Methods of test for styrene - Butadiene rubber (Sbr) latices: Part 2 determination of density sbrl:6 (First Revision)
1
Methods of tests
661
IS 4511 : Part 3 : 1987 Methods of test for styrene - Butadiene rubber (Sbr) latices: Part 3 determination of volatile unsaturates [sbrl:8] (First Revision)
1
Methods of tests
662
IS 4511 : Part 5 : 2005 Method of test for styrene - Butadiene rubber (Sbr), latices: Part 5 determination of soap and organic - Acid content (Second Revision)
2
Methods of tests
663
IS 4511 : Part 4 : 2023 Methods of test for Styrene Butadiene Rubber SBR Latices Part 4 Determination of bound Styrene
2
Methods of tests
664
IS 4523 : 1989 Acetoacetanilide - Specification (First Revision)
1
Product Specification
665
IS 4524 : 1989 Acetoacet - O - Chloroanilide - Specification (First Revision)
1
Product Specification
666
IS 4526 : 1976 Specification for 2, 5 - Dichloroaniline (First Revision)
1
Product Specification
667
IS 4528 : 1977 4, 4-dinitrostilbene-2, 2-disulphonic Acid (Disodium Salt)(first revision)
1
Product Specification
668
IS 4543 : 2025 MARQUENCHING OILS — SPECIFICATION (Second Revision)
2
------
669
IS 4566 : 2020 Specification for methylene chloride (dichloromethane), technical (Second Revision)
2
Product Specification
670
IS 4576 : 2021 Liquefied Petroleum Gases-Specification
4
Methods of tests
671
IS 4578 : 1997 Lubricants - Lubricating oil for refrigeration machinery - Specification (Second Revision)
2
Product Specification
672
IS 4588 : 1986 Specification for rubber, raw, natural (Third Revision)
3
Product Specification
673
IS 4603 : 1991 Phenyl ethyl alcohol - Specification (First Revision)
1
Product Specification
674
IS 4639 : Part 1 : 2000 Petroleum industry - Terminology: Part 1 raw materials and products (First Revision)
1
Terminology
675
IS 4639 : Part 2 : 2000 Petroleum industry - Terminology: Part 2 properties and tests (First Revision)
1
Terminology
676
IS 4639 : Part 3 : 2000 Petroleum indusry - Terminology: Part 3 exploration and production (First Revision)
1
Terminology
677
IS 4639 : Part 5 : 2000 Petroleum i - Ndustry - Terminology: Part 5 transport, storage, distribution (First Revision)
1
Terminology
678
IS 4639 : Part 6 : 2002 Petroleum industry - Terminology: Part 6 measurement (First Revision)
1
Terminology
679
IS 4639 : Part 7 : 2000 Petroleum industry - Terminology: Part 7 miscellaneous terms (First Revision)
1
Terminology
680
IS 4639 : Part 99 : 2002 Petroleum industry - Terminology: Part 99 general and index (First Revision)
1
Terminology
681
IS 4652 : 2019 Ethyl - P - Hydroxybenzoate / ethylparaben for cosmetic industry - Specification (Third Revision)
3
Product Specification
682
IS 4653 : 2018 Methyl - P - Hydroxybenzoate / methyl paraben for cosmetic industry - Specification (Third Revision)
3
Product Specification
683
IS 4654 : 2019 Paraffin Wax — Specification ( Third Revision )
3
Product Specification
684
IS 4669 : 2026 METHODS OF TEST — POLYVINYL CHLORIDE RESINS (First Revision)
1
------
685
IS 4707 : Part 1 : 2020 Classification For Cosmetic Raw Materials and Adjuncts Part 1 Colourants ( Fourth Revision )
4
Others
686
IS 4707 : Part 2 : 2025 Classification of Cosmetic Raw Materials and Adjuncts Part 2 List of GNRAS and Restricted Ingredients (Fifth Revision)
5
------
687
IS 4887 : 1980 Specification for petroleum jelly for cosmetic industry (First Revision)
1
Product Specification
688
IS 4887 : 2026 PETROLEUM JELLY FOR COSMETIC INDUSTRY - SPECIFICATION
2
------
689
IS 493 : Part 1 : 2019 Specification for general purpose machinery and spindle oils: Part 1 machinery oils (Second Revision)
2
Product Specification
690
IS 493 : Part 2 : 2019 Specification for general purpose machinery and spindle oils: Part 2 spindle oils (Second Revision)
2
Product Specification
691
IS 495 : 2023 Graphite Flake for Lubricants - Specification
2
------
692
IS 501 : 1976 Specification for oxalic acid, technical and analytical reagent (Second Revision)
2
Product Specification
693
IS 5042 : 1976 Specification for 1 - Aminoanthraquinone (First Revision)
1
Product Specification
694
IS 5042 : 2026 1-AMINOANTHRAQUINONE - SPECIFICATION
2
------
695
IS 5043 : 1992 2 - Aminoanthraquinone - Specification (Second Revision)
2
Product Specification
696
IS 5045 : 1989 Dye intermediates - Metanilic acid, technical - Specification (Second Revision)
2
Product Specification
697
IS 506 : 2019 Automotive and other general purpose grease ? specification (Fourth Revision)
4
Product Specification
698
IS 5062 : Part 5 : 2018 Methods of test for brown coals and lignites : Part 5 determination of acetone-soluble material (Resinous Substance) in the benzene-soluble extract (Second Revision)
2
Methods of tests
699
IS 5062 : Part 3 : 2022 Methods of test for brown coals and lignite : Part 3 determination of the yields of tar water gas and coke residue by low temperature distillation (Second Revision)
2
Methods of tests
700
IS 5062 : Part 7 : 2024 Brown coals and lignites - Methods of test : Part 7 determination of humic acids (First Revision)
1
------
701
IS 5062 : Part 4 : 2025 Brown Coal and Lignite - Methods of Test Part 4 Determination of Yield of Benzene-Soluble Extract - Semi- Automatic Method (Third Revision)
3
------
702
IS 5062 : Part 6 : 2025 Brown Coal and Lignite - Methods of Test: Part 6 Determination of True Relative Density and Apparent Relative Density (First Revision)
1
------
703
IS 507 : 1993 General purpose grease for defence applications - Specification (Third Revision)
3
Product Specification
704
IS 507 : 2026 GENERAL PURPOSE GREASE FOR DEFENCE APPLICATIONS SPECIFICATION
4
------
705
IS 508 : 2022 Grease Graphited - Specification (fifth revision)
6
Product Specification
706
IS 512 : 2025 Oil of Citronella (Java) - Specification (Third Revision)
3
------
707
IS 5137 : 2023 Rubber Hose for Cement Grouting � Specification (Third Revision)
3
------
708
IS 5149 : 2020 Specification for maleic anhydride, technical (Second Revision)
2
Product Specification
709
IS 5158 : 2025 Phthalic Anhydride, Technical - Specification (Third Revision)
3
------
710
IS 5164 : 1984 Specification for iso - Borneol (First Revision)
1
Product Specification
711
IS 517 : 2020 Specification for methanol (methyl alcohol) (Third Revision)
3
Product Specification
712
IS 5189 : 2022 SPECIFICATION FOR COLD POLYMERIZED RAW STYRENE-BUTYDIENE RUBBER Second Revision
2
Methods of tests
713
IS 5190 : 1993 Code of packaging of natural rubber latex in drums (First Revision)
1
Code of Practice
714
IS 5190 : 2026 CODE OF PACKAGING OF NATURAL RUBBER LATEX IN DRUMS
2
------
715
IS 5192 : Part 1 : 1994 Natural rubber compounds specification: Part 1 for moulded products (Second Revision)
2
Product Specification
716
IS 5192 : Part 2 : 1994 Natural rubber compoundsspecification: Part 2 for extruded products (Second Revision)
2
Product Specification
717
IS 5193 : 1998 Rubber sealing rings for domestic fruit and vegetable preserving jars specification (First Revision)
1
Product Specification
718
IS 5209 : 2002 Coal preparation plant - Principles and conventions for flowsheets (First Revision)
1
Others
719
IS 5210 : 1995 High impact polystyrene sheet - Specification (First Revision)
1
Product Specification
720
IS 5254 : 1980 Specification for acetanllide, technical (First Revision)
1
Product Specification
721
IS 526 : 2007 Oil of palmarosa - Specification (Third Revision)
3
Product Specification
722
IS 5271 : 1984 Specification for paraformaldehyde (First Revision)
1
Product Specification
723
IS 528 : 2025 Oil of Mentha Arvensis - Specification (Fourth Revision)
4
------
724
IS 5295 : 2023 Ethylene glycol - Specification (Third Revision)
3
------
725
IS 5296 : 2024 Chloroform, pure and technical - Specification (Third Revision)
3
------
726
IS 5297 : 1977 Specification for perchloroethylene (tetrachloroethylene), technical (First Revision)
1
Product Specification
727
IS 5299 : 2001 Methods of sampling and tests for dye intermediates (First Revision)
1
Methods of tests
728
IS 5322 : 1988 Specification for high density polyethylene wash-bowls (First Revision)
1
Product Specification
729
IS 533 : 2007 Gum spirit of turpentine (Oil Of Turpentine) - specification (Third Revision)
3
Product Specification
730
IS 5339 : 2021 Skin Powder for Infants
3
Safety Standard
731
IS 534 : 2021 Benzene - Specification (Fifth Revision)
4
Code of Practice
732
IS 5340 : 1981 Specificaiton for lanolin, anhydrous, for cosmetic industry (First Revision)
1
Product Specification
733
IS 5341 : 1980 Specification for benzyl chloride, technical (First Revision)
1
Product Specification
734
IS 5356 : 1983 Specification for isopropyl myristate for cosmetic industry (Second Revision)
2
Product Specification
735
IS 537 : 2025 Toluene - Specification (third revision)
3
------
736
IS 5378 : 1994 Polyethylene cane - Specification (First Revision)
1
Product Specification
737
IS 538 : 2020 Phenol (carbolic acid) - Specification (Third Revision)
3
Product Specification
738
IS 5382 : 2018 Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials (Second Revision)
2
Product Specification
739
IS 5382 : 2025 RUBBER SEALS JOINT RINGS FOR WATER SUPPLY DRAINAGE AND SEWERAGE PIPELINES SPECIFICATION FOR MATERIALS ( Third Revision )
3
------
740
IS 5383 : 2021 Tooth Powder -Specification
3
Product Specification
741
IS 539 : 1974 Specification for naphthalene (Second Revision)
2
Product Specification
742
IS 540 : 1968 Specification for refined cresylic acid (First Revision)
1
Product Specification
743
IS 5430 : 2017 Ammonia preserved concentrated natural rubber latex (Second Revision)
2
Product Specification
744
IS 5438 : 1977 Specification for nitrobenzene - 3 - Sulphonic acid, sodium salt (First Revision)
1
Product Specification
745
IS 5451 : 2001 Glossary of terms relating to coal carbonization products (First Revision)
1
Terminology
746
IS 5464 : 2023 Citric acid, monohydrate - Specification (Second Revision)
2
Process Specification
747
IS 5573 : 1984 Specification for ethylene oxide (First Revision)
1
Product Specification
748
IS 5573 : 2026 Ethylene Oxide — Specification (Second Revision)
2
------
749
IS 5591 : 2003 Chlorobenzene - Specification (First Revision)
1
Product Specification
750
IS 5592 : 1981 Specification for monochloroacetic acid (First Revision)
1
Product Specification
751
IS 5598 : 1986 Code of practice for bale coating, packing and marking of natural rubber (First Revision)
1
Code of Practice
752
IS 5599 : 1999 Rubber - Raw,naturaland synthetic - Methods for sampling and sample preparation (First Revision)
1
Methods of tests
753
IS 5647 : 2003 P - Toluidine - Specification (First Revision)
1
Product Specification
754
IS 5648 : 2003 O - Anisidine - Specification (First Revision)
1
Product Specification
755
IS 5649 : 2003 O - Toluidine - Specification (Second Revision)
2
Product Specification
756
IS 5753 : 2006 Alpha - Amyl cinnamic aldehyde - Specification (Third Revision)
3
Product Specification
757
IS 5754 : 1998 Phenylaceticacid,perfumery grade - Specification (Second Revision)
2
Product Specification
758
IS 5757 : 1992 Oil of pine - Specification (Second Revision)
2
Product Specification
759
IS 5759 : 2006 Antifreeze coolant - Specification (Second Revision)
2
Product Specification
760
IS 5797 : 2022 Rubber Hoses and Hose Assemblies for Aircraft Ground Fuelling and Defuelling Specification Fifth Revision of IS 5797
5
Terminology
761
IS 5821 : 2024 Hot Water Hose of Rubber — Specification (Third Revision)
3
------
762
IS 587 : 1997 Oil of geranium - Specification (Third Revision)
3
Product Specification
763
IS 5894 : 2018 Rubber hoses for sand and grit blasting - Specification (Third Revision)
3
Product Specification
764
IS 5894 : 2025 RUBBER HOSES AND HOSE ASSEMBLIES FOR SAND AND GRIT BLASTING SPECIFICATION ( Fourth Revision )
4
------
765
IS 6241 : 2024 Determination of stripping value of road aggregates - Method of test (First Revision)
1
------
766
IS 6258 : 2003 O - Nitroanisole - Specification (First Revision)
1
Product Specification
767
IS 6263 : 2018 Volatile corrosion inhibitor (Vci) treated paper - Specification (First Revision)
1
Product Specification
768
IS 6264 : 1994 J - acid, technical - Specification (First Revision)
1
Product Specification
769
IS 6265 : 2025 Quinizarin, Technical - Specification (first revision)
1
------
770
IS 6266 : 1983 Specification for 1,4 - Diaminoanthraquinone, technical (First Revision)
1
Product Specification
771
IS 6307 : 2023 Rigid pvc sheets - Specification (Second Revision)
2
------
772
IS 6312 : 1994 Polyethylene containers for the transport of materials - Specification (Second Revision)
2
Product Specification
773
IS 6333 : 2019 Propyl - P - Hydroxybenzoate/ propylparaben for cosmetic industry - Specification (Third RevisiOn)
3
Product Specification
774
IS 6334 : 2019 Butyl - P - Hydroxybenzoate/ butylparaben for cosmetic industry - Specification (Third Revision)
3
Product Specification
775
IS 6345 : 1996 Methods of sampling of coal for float and sink analysis (First Revision)
1
Others
776
IS 635 : 2024 Oil and Solvent Resistant Hose of Rubber — Specification (Fourth Revision)
4
------
777
IS 6356 : 2021 TOOTH PASTE - SPECIFICATION
4
Code of Practice
778
IS 636 : 2018 Non - Percolating flexible fire fighting delivery hose - Specification (Fourth Revision)
4
Product Specification
779
IS 637 : 2024 Rubber Tubings for General Purposes — Specification (Third Revision)
3
------
780
IS 638 : 2024 SHEET RUBBER JOINTING AND RUBBER INSERTION JOINTING - SPECIFICATION (Third Revision)
3
------
781
IS 6393 : 1987 Specification for phenylacetamide (First Revision)
1
Product Specification
782
IS 6515 : 1999 Sodium pentachlorophenate - Specification (First Revision)
1
Product Specification
783
IS 6552 : 2024 Straight mineral high demulsibility oils - Specification (second revision)
2
------
784
IS 6597 : 2001 Glossary of terms relating to fragrance and flavour industry (Second Revision)
2
Terminology
785
IS 6604 : 2023 Code for packaging of solid insecticides (up to 1 000g) (Second Revision)
2
------
786
IS 6608 : 2004 Skin creams - Specification (Second Revision)
2
Product Specification
787
IS 6611 : 2019 Symbols for Rubbers and Latices ( Second Revision )
2
Terminology
788
IS 6693 : 2025 EBONITE - SPECIFICATION (first revision)
1
------
789
IS 6699 : 2019 Oil of cinnamon leaf, sri lanka type (Cinnamomum Zeylanicum Blume) (Second Revision)
2
Product Specification
790
IS 6712 : 2003 o - Dichlorobenzene - Specification (First Revision)
1
Product Specification
791
IS 6713 : 2016 Rubber products - Guidelines for storage (Second Revision)
2
Code of Practice
792
IS 6716 : 1981 Specification for benzoic acid, technical (First Revision)
1
Product Specification
793
IS 6746 : 1994 Unsaturated polyester resin systems - Specification (First Revision)
1
Product Specification
794
IS 6770 : 1984 SpeciflCation for benzophenone (First Revision)
1
Product Specification
795
IS 6918 : 2002 Mercaptobenzothiazole - Specification (First Revision)
1
Product Specification
796
IS 695 : 2020 Acetic acid - Specification (Fourth Revision)
4
Product Specification
797
IS 6961 : 2025 3-BROMOBENZANTHRONE, TECHNICAL - SPECIFICATION (Second Revision)
2
------
798
IS 6962 : 1991 3,9 - Dibromobenzanthrone, technical - Specification (First Revision)
1
Product Specification
799
IS 6971 : 1998 2 - Ethyl hexan - 1 - Ol - Specification (First Revision)
1
Product Specification
800
IS 7019 : 1998 Glossary of terms in plastics and flexible packaging, excluding paper (Second Revision)
2
Terminology
801
IS 702 : 2022 Industrial bitumen - Specification (Third Revision) Amendment - 2
3
Methods of tests
802
IS 7069 : 2001 Benzothiazyl - 2 - Cyclohexyl sulphenamide (Cbs) - Specification (Second Revision)
2
Product Specification
803
IS 7101 : 1994 Coconut diethanolamide for cosmetic industry - Specification (Second Revision)
2
Product Specification
804
IS 7123 : 2019 Hair oils - Specification (Third Revision)
3
Product Specification
805
IS 7135 : 1987 Specification for dimethyl sulphate, technical (First Revision)
1
Product Specification
806
IS 7166 : 1985 Specification for cellulose secondary acetate flakes (First Revision)
1
Product Specification
807
IS 717 : 2025 Carbon Disulphide, Technical - Specification (Third Revision)
3
------
808
IS 718 : 2023 Carbon tetrachloride - Specification (Third Revision)
3
Product Specification
809
IS 719 : 2022 Antifriction Bearing Grease (third revision)
3
Product Specification
810
IS 7190 : Part 2 : 2022 Coke - Methods of test : Part 2 determination of bulk density in a large container (Second Revision)
1
Terminology
811
IS 7190 : Part 1 : 2024 Coke - Methods of test : Part 1 determination of bulk density in a small container (Second Revision)
2
------
812
IS 720 : 2022 Locomotive Greases
4
Service Specification
813
IS 7299 : 2021 Light Liquid Paraffin for Cosmetic Industry - Specification Second Revision of IS 7299
2
Product Specification
814
IS 73 : 2013 Paving bitumen - Specification (Fourth Revision) Amendment - 4
4
Product Specification
815
IS 7328 : 2020 Specification for polyethylene material for moulding and extrusion (Third Revision)
3
Product Specification
816
IS 7330 : 1988 Methods of sampling and test for ion - Exchange resins (First Revision)
1
Methods of tests
817
IS 7351 : 2025 STYRENATED PHENOL - SPECIFICATION (SECOND REVISION)
2
------
818
IS 7359 : 2025 1-CHLOROANTHRAQUINONE, TECHNICAL - SPECIFICATION
2
------
819
IS 7360 : 2025 1,5-DICHLOROANTHRAQUINONE TECHNICAL SPECIFICATION
2
------
820
IS 7362 : 1986 Specification for tobias acid (First Revision)
1
Product Specification
821
IS 7364 : 1986 Specification for 3 - Nitro - 4 - Aminotoluene (First Revision)
1
Product Specification
822
IS 7394 : 2024 Plastics Containers for Reserve Fuel — Specification (Second Revision)
2
------
823
IS 7395 : 1989 Gum ghatti - Specification (First Revision)
1
Product Specification
824
IS 7408 : Part 1 : 2000 Blow moulded polyolefin containers - Specification: Part 1 : up to 5 litres capacity (Second Revision)
2
Product Specification
825
IS 7408 : Part 2 : 2000 Blow moulded polyolefin containers - Specification: Part 2 : over 5 litres, up to and including 60 litres capacity (First Revision)
1
Product Specification
826
IS 7408 : Part 3 : 2000 Blow moulded polyolefin containers - Specification: Part 3 : closed head containers over 60 litres, up to and including 250 litres capacity (First Revision)
1
Product Specification
827
IS 7466 : 2023 Rubber Gasket for Pressure Cooker - Specification ( Second Revision )
2
Product Specification
828
IS 7490 : 2022 RECLAIMED RUBBER SPECIFICATION Second Revision of IS 7490
2
------
829
IS 7497 : 1985 Specification for high abrasion furnace (Haf) carbon black (First Revision)
1
Product Specification
830
IS 7498 : 1985 Methods of sampling and test for carbon black (First Revision)
1
Methods of tests
831
IS 7499 : 2023 NATURAL RUBBER NR - EVALUATION PROCEDURE (Third Revision)
3
Process Specification
832
IS 7503 : 2025 RUBBER INDUSTRY - GLOSSARY OF TERMS (first revision)
1
------
833
IS 7514 : 2020 Grease, Low Temperature ? Specification ( Second Revision )
2
Product Specification
834
IS 7559 : 1992 Salicylic acid, technical - Specification (First Revision)
1
Product Specification
835
IS 7569 : 1987 Specification for cast acrylic sheets for use in luminaires (Second Revision)
1
Product Specification
836
IS 761 : 2017 Oil of ginger - Specification (Second Revision)
2
Product Specification
837
IS 7619 : 1987 Specification for pentaerythritol (First Revision)
1
Product Specification
838
IS 7623 : 2019 Multipurpose industrial grease - Specification (Third Revision)
3
Product Specification
839
IS 7635 : 1992 2 - Nitroaniline - Specification (Second Revision)
1
Product Specification
840
IS 7636 : 1992 4 - Chloro - 2 - Toluidine - Specification (Second Revision)
1
Product Specification
841
IS 7637 : 1992 5 - Chloro - 2 - Toluidine - Specification (First Revision)
1
Product Specification
842
IS 7643 : 2025 4-CHLORO-2-NITROANILINE SPECIFICATION
2
------
843
IS 7644 : 2003 3 - Nitroaniline - Specification (First Revision)
1
Product Specification
844
IS 7645 : 2021 Phenyl J-acid, Technical - Specification (second revision)
2
Methods of tests
845
IS 7646 : 1994 Benzoyl j - Acid, technical - Specification (First Revision)
1
Product Specification
846
IS 7647 : 2003 Acetoacet - 2 - Toluidide - Specification (First Revision)
1
Product Specification
847
IS 7651 : 2025 Wire Reinforced Rubber Covered Hydraulic Hose - Specification (Fourth Revision)
4
------
848
IS 7654 : 2024 Rubber Hose for Chemicals — Specification (Second Revision)
2
------
849
IS 7669 : 1990 Shampoo, soap based - Specification (First Revision)
1
Product Specification
850
IS 7679 : 1978 Specificaitons for hair creams (First Revision
1
Product Specification
851
IS 7686 : 2020 Specification for 3 ( N, N-Diethyl ) Aminophenol ( First Revision )
1
Product Specification
852
IS 7696 : 2023 Para-cresyl Methyl Ether Second Revision of IS 7696
2
Code of Practice
853
IS 7697 : 2025 Phenyl Ethyl Methyl Ether - Specification (Second Revision)
2
------
854
IS 770 : 2013 Classification and codification of indian coals, lignites and semi-anthracites (Third Revision)
3
Others
855
IS 7704 : 2022 4-Aminotoluene-3-Sulphonic Acid - Specification (Second Revision)
3
Product Specification
856
IS 7792 : 2023 Plastics containers - Handling - Code of Practice (First Revision)
1
------
857
IS 7884 : 2023 SHAMPOO - SPECIFICATION Fourth Revision
4
------
858
IS 7910 : 2003 Monoethanolamine - Specification (First Revision)
1
Product Specification
859
IS 7911 : 2000 Diethanolamine - Specification (First Revision)
1
Product Specification
860
IS 7918 : 2001 Diethylene glycol - Specification (First Revision)
1
Product Specification
861
IS 7933 : 2022 Specification for Flexible Polyurethane Foam for Domestic Mattresses First Revision
1
Others
862
IS 7959 : 2023 Polyethylene containers for foam compounds - Specification (Second Revision)
2
------
863
IS 8050 : 2018 Alpha picoline - Specification (First Revision)
1
Product Specification
864
IS 8058 : 2018 Pyridine - Specification (First Revision) Amendment - 2
1
Product Specification
865
IS 8059 : 1993 2 - Chloro - 5 - Aminotoluene - 4 - Sulphonic acid, technical - Specification (First Revision)
1
Product Specification
866
IS 8111 : 2025 N N-DIMETHYLANILINE - SPECIFICATION (SECOND REVISION)
2
------
867
IS 8120 : 1989 Schaeffer's Acid (Sodium Salt), Technical - Specification (First Revision)
1
Product Specification
868
IS 8134 : 1996 Intermediate super abrasion furnace (Isaf) carbon black - Specification (Second Revision)
2
Product Specification
869
IS 8135 : 1996 Fast extrusion furnace (Fef) carbon black - Specification (Second Revision)
2
Product Specification
870
IS 8189 : 2023 SPECIFICATION FOR RUBBER HOSE AND HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICE
2
Code of Practice
871
IS 8193 : 2025 2-Nitro Chlorobenzene - Specification (First Revision)
1
------
872
IS 8194 : 2025 3-Nitro-Chlorobenzene - Specification (First Revision)
1
------
873
IS 8195 : 2025 4-Nitro-Chlorobenzene - Specification (First Revision)
1
------
874
IS 8233 : 1987 Specification for phenyl peri acid, technical (First Revision)
1
Product Specification
875
IS 8397 : 2025 2-Nitrotoluene - Specification (FIRST REVISION)
1
------
876
IS 8398 : 2025 3-NITROTOLUENE SPECIFICATION
1
------
877
IS 8399 : 2025 1, 3 DINITROBENZENE SPECIFICATION (First Revision)
1
------
878
IS 8400 : 2025 2 4-DINITRO-CHLOROBENZENE - SPECIFICATION (First Revision)
1
------
879
IS 8402 : 1987 Methods of sampling and test for pressure sensitive adhesive tapes (First Revision)
1
Methods of tests
880
IS 8406 : 1993 Gear lubricants for enclosed industrial gear drives - Specification (Second Revision)
2
Product Specification
881
IS 8481 : 2020 Oxidation Hair Dyes ( Liquid / Gel / Cream) — Specification ( Fourth Revision )
4
Product Specification
882
IS 8482 : 2020 Cologne — Specification ( Second Revision )
2
Product Specification
883
IS 8483 : 1989 Specification for dibenzothiazyl disulphide (First Revision)
1
Product Specification
884
IS 8502 : 2025 PETROLEUM COKE - SPECIFICATION (second revision)
3
------
885
IS 8543 (Part 1/Sec 1) : 2026 PLASTICS METHODS OF TESTING PART 1 CHARACTERIZATION OF POLYMER STRUCTURE AND SIZE SECTION 1 DETERMINATION OF MOLECULAR MASS FROM VISCOSITY first revision
1
------
886
IS 8551 : 2023 1-4-Sulphophenyl-3-Methyl-5-Pyrazolone - Specification (First Revision)
1
------
887
IS 8552 : 2023 1-4-Sulphophenyl-3-Carboxy-5-Pyrazolone - Specification (First Revision)
1
------
888
IS 8553 : 2023 1-Phenyl-3-Methyl-5-Pyrazolone-Specification (First Revision)
1
------
889
IS 8626 : 2025 R Salt, Technical - Specification (SECOND REVISION)
2
------
890
IS 8627 : 2025 GAMMA ACID - SPECIFICATION (first revision)
2
------
891
IS 8628 : 2020 G Salt, Technical — Specification ( Second Revision )
2
Product Specification
892
IS 8634 : 1987 Specification for nitrodiazo acid (First Revision)
1
Product Specification
893
IS 8637 : 2020 H acid - Specification ( Second Revision )
2
Product Specification
894
IS 8654 : 2019 Automotive hydraulic brake fluid, heavy duty - Specification (Third Revision)
3
Product Specification
895
IS 867 : 2026 PHENOLIC MOULDING MATERIALS - METHODS OF TEST (Second Revision)
1
------
896
IS 8688 : 1988 Plastics bottles for potable water - Specification (Second Revision)
2
Product Specification
897
IS 869 : 2020 Specification for ethylene dichloride (Third Revision)
3
Product Specification
898
IS 8747 : 2025 Environmental Stress-Crack Resistance of Blow-Moulded Polyethylene Containers - Methods of Test (first revision)
1
------
899
IS 8796 : 2025 Trimethylamine, Technical - Specification (First Revision)
1
------
900
IS 8851 : 2025 SULPHUR FOR RUBBER INDUSTRY - SPECIFICATION( Second Revision )
2
------
901
IS 8861 : 2026 1,4-DICHLORO-2-NITROBENZENE SPECIFICATION
1
------
902
IS 8862 : 2025 TITANIUM DIOXIDE ANATASE TYPE FOR RUBBER INDUSTRY - SPECIFICATION( First Revision )
1
------
903
IS 8873 : 2026 Monomethylamine , Technical - Specification (First Revision)
1
------
904
IS 8874 : 2025 Dimethylamine, Technical - Specification (First Revision)
1
------
905
IS 8877 : 2023 Acetoacetic methyl ester - Specification (Third Revision)
3
Product Specification
906
IS 8887 : 2018 Bitumen Emulsion for Roads (Cationic Type) Amendment - 3
3
Product Specification
907
IS 8979 : 1997 Tetramethyl thiuram disulphide - Specification (Second Revision)
2
Product Specification
908
IS 9127 : Part 2 : 2014 Methods for petrographic analysis of coals : Part 2 methods of preparing coal samples (Second Revision)
2
Others
909
IS 9127 : Part 3 : 2002 Methods for the petrographic analysis of bituminous coal and anthracite : Part 3 method of determining maceral group composition (First Revision)
1
Methods of tests
910
IS 9127 : Part 1 : 2022 Methods of petrographic analysis of coal : Part 1 definition of terms relating to petrographic anaysis of coal (Second Revision)
2
Others
911
IS 9127 : Part 4 : 2022 Methods for petrographic anaysis of coal : Part 4 method of determining microlithotype carbominerite and minerite composition (First Revision)
1
Service Specification
912
IS 9136 : 2022 Calcium Complex Grease - Specification (second revision)
3
Product Specification
913
IS 917 : 1976 Specification for activated calcium carbonate for rubber industry (First Revision)
1
Product Specification
914
IS 918 : 1985 Specification for calcium carbonate, precipitated for cosmetic industry (Second Revision)
2
Product Specification
915
IS 9182 : Part 1 : 1993 Lubricants for wire ropes and fibre cores - Specification: Part 1 lubricants for fibre core of wire - Ropes (First Revision)
1
Product Specification
916
IS 9182 : Part 2 : 1993 Lubricants for wire ropes and - Fibre cores - Specification part - 2 lubricants for wire strands and ropes . (First Revision)
1
Product Specification
917
IS 9182 : Part 3 : 1993 Lubricants for wire ropes and fibre cores - Specification: Part 3 lubricants for rope dressing in service (First Revision)
1
Product Specification
918
IS 9245 : 1994 Nail polish (Nail Enamel) - Specificaiton (First Revision)
1
Product Specification
919
IS 9255 : 2020 After-Shave Lotion — Specification ( Second Revision )
2
Product Specification
920
IS 9257 : 1993 Oil of eucalyptus citriodora - Specification (First Revision)
1
Product Specification
921
IS 9316 : Part 5 : 2013 Methods of test for rubber latex: Part 5 drawing of samples [rl : 5] (Second Revision)
2
Methods of tests
922
IS 9316 : Part 3 : 1987 Methods of test for rubber latex: Part 3 determination of coagulum content (Sieve Residue) [rl:3] (First Revision)
1
Methods of tests
923
IS 9316 : Part 6 : 2017 Methods of test for rubber latex: Part 6 determination of pH [ rl : 6 ] (Second Revision)
2
Methods of tests
924
IS 9316 : Part 4 : 2023 METHODS OF TEST FOR RUBBER LATEX PART 4 DETERMINATION OF TOTAL SOLIDS CONTENT RL : 4 ISO 124:2014 IDT
2
Product Specification
925
IS 9316 : Part 1 : 2023 METHODS OF TEST FOR RUBBER LATEX PART 1 DETERMINATION OF SURFACE TENSION RL : 1 ISO 1409:2020 IDT
2
Product Specification
926
IS 9316 : Part 8 : 2023 METHODS OF TEST FOR RUBBER LATEX PART 8 DETERMINATION OF TOTAL IRON ISO 1657:1986 IDT
1
Code of Practice
927
IS 9316 : Part 2 : 2024 RUBBER LATEX � METHODS OF TEST PART 2 DETERMINATION OF VISCOSITY (Second Revision )
2
------
928
IS 9339 : 2020 Pomades and Brilliantines — Specification ( Second Revision )
2
Product Specification
929
IS 9381 : 2024 Tar and Bituminous Materials - Determination of Fraass Breaking Point of Bitumen - Methods of Test (First Revision)
1
------
930
IS 9382 : 2022 Methods for testing tar and bituminous materials - Determination of effect of heat and air by thin film oven test
1
Code of Practice
931
IS 9406 : 2024 CALCIUM SILICATE FOR RUBBER INDUSTRY — SPECIFICATION First Revision of IS 9406
1
------
932
IS 9407 : 2025 LIGHT MAGNESIUM OXIDE FOR RUBBER INDUSTRY - SPECIFICATION (first revision)
1
------
933
IS 9466 : 2020 Viscosity Classification For Industrial Liquid Lubricants ( First Revision )
1
Others
934
IS 9573 : Part 2 : 2017 Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 2 domestic and commercial application (Fourth Revision)
4
Product Specification
935
IS 958 : 2020 Temporary Corrosion Preventives, Grease Type, Soft Film ? Specification ( Third Revision )
3
Product Specification
936
IS 9591 : 2023 PLASTICIZER ESTERS METHODS OF SAMPLING AND TESTS
2
------
937
IS 9611 : 2026 SPECIFICATION FOR CUTTING OIL SOLUBLE CLEAR First Revision of IS 9611
1
------
938
IS 9738 : 2025 POLYETHYLENE BAGS FOR GENERAL PURPOSES - SPECIFICATION (third revision)
3
------
939
IS 9740 : 2018 Shaving cream - Specification (First Revision)
1
Product Specification
940
IS 9754 : 2025 HIGH DENSITY POLYETHYLENE CONTAINERS FOR PACKING OF LIQUID PESTICIDES (UP TO 1 LITRE CAPACITY) - SPECIFICATION (first revision)
1
------
941
IS 9766 : 1992 Flexible pvc compounds - Specification (First Revision)
1
Product Specification
942
IS 9827 : 2023 Shoe adhesive - Natural rubber latex base - Specification (First Revision)
1
------
943
IS 9830 : 1988 Specification for water - Soluble sodium carboxymethyl cellulose for cosmetic industry (First Revision)
1
Product Specification
944
IS 9831 : 1987 Specification for sodlUm hydroxide for cosmetic industry (First Revision)
1
Product Specification
945
IS 9832 : 2002 Cosmetic pencils - Specification (First Revision)
1
Product Specification
946
IS 9833 : 2018 List of colourants for use in plastics in contact with foodstuffs and pharmaceuticals (Second Revision)
2
Safety Standard
947
IS 9843 : 1991 Code of practice for use of adhesives for packaging (First Revision)
1
Code of Practice
948
IS 9845 : 1998 Determination of overall migration of constituents of plastics materials and articles intended to come in contact with foodstuffs - Method of analysis (Second Revision)
2
Methods of tests
949
IS 9848 : 1987 Specification for briefcases, plastic body (First Revision)
1
Product Specification
950
IS 9850 : 2004 Methyl iso - Butyl ketone - Specification (First Revision)
1
Product Specification
951
IS 9851 : 2020 Specification for iso-Propyl ether (First Revision)
1
Product Specification
952
IS 9873 (Part 3) : 2020 Safety of Toys Part 3 Migration of Certain Elements ( Third Revision )
3
Product Specification
953
IS 9873 (Part 3) : 2020 Safety of Toys Part 3 Migration of Certain Elements ( Third Revision ) Amendment - 1
3
Methods of tests
954
IS 9873 (Part 1) : 2025 SAFETY OF TOYS PART 1: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES (Fifth Revision)
5
------
955
IS 9873 (Part 2) : 2025 SAFETY OF TOYS PART 2 FLAMMABILITY (Fourth Revision)
4
------
956
IS 9873 (Part 6) : 2025 SAFETY OF TOYS PART 6 CERTAIN PHTHALATE ESTERS (Second Revision )
2
------
957
IS 9873 (Part 8) : 2026 Safety of toys Part 8: Age determination First age grade for the appropriate play of toys First Revision
1
------
958
IS 9873 (Part 4) : 2026 Safety of toys Part 4: Activity toys for domestic use
1
------
959
IS 9875 : 2018 Lipstick - Specification (Second Revision)
2
Product Specification
960
IS 9908 : 2020 Specification for formic acid (First Revision)
1
Product Specification
961
IS 9912 : 1981 Coal tar based coating material and primers for protecting iron or steel pipelines - Specification (First Revision)
1
Product Specification
962
IS 9917 : 2022 Calcium Base Heat Stable Grease - Specification (second revision)
2
Safety Standard
963
IS 9949 : 2025 Abrasive Properties of Coal and Associated Minerals - Methods of test (Second Revision)
2
------
964
IS 9986 : 1999 Benzaldehyde - Specification (First Revision)
1
Product Specification
