|
1 |
IS 10011 : 2019 |
Dentistry - Polymer - Based restorative materials (First Revision) |
Product Specification |
------ |
|
2 |
IS 10012 : 1981 |
Specification for dental zinc oxide/eugenol filling materials |
Product Specification |
------ |
|
3 |
IS/ISO 10079 Part 2 : 2014 |
Medical Suction Equipment Part 2 Manually Powered Suction Equipment (First Revision) |
Product Specification |
------ |
|
4 |
IS/ISO 10079 : Part 3 : 2014 |
Medical suction equipment: Part 3 suction equipment powered from a vacuum or positive pressure gas source (First Revision) |
Product Specification |
------ |
|
5 |
IS 10104 : Part 1 : 1981 |
Needle suture: Part 1 curved 1/4, 3/8, 1/2 and 5/8 circle |
------ |
------ |
|
6 |
IS 10128 : 1982 |
Specification for pin, knowles |
Product Specification |
------ |
|
7 |
IS 10150 : 1981 |
Guide for sterilization of medical products |
Code of Practice |
------ |
|
8 |
IS 10154 : 1982 |
Blade Plate, Osteotomy, Wainwright-hammond's Pattern |
------ |
------ |
|
9 |
IS 10155 : 1982 |
Specification for blade plate, femoral, lower |
Product Specification |
------ |
|
10 |
IS 10157 : 1982 |
Percussor, Neurological, McGill's Pattern |
Product Specification |
------ |
|
11 |
IS 10159 : 1982 |
Nail, Supracondylar, Jewett's Pattern |
------ |
------ |
|
12 |
IS 10174 : 1982 |
Tongs, skull Traction, Crutchfield's Pattern |
Product Specification |
------ |
|
13 |
IS 10183 : 1982 |
Specification for retractor, deep, self - Retaining, laminectomy |
Product Specification |
------ |
|
14 |
IS 10258 : Part 3 : 2010 |
Sterile hypodermic syringes for single use: Part 3 auto - Disable syringes for fixed - Dose immunization |
Product Specification |
------ |
|
15 |
IS 10269 : 1982 |
Specification for haemocytometer counting chambers clinical and diagnostic apparatus |
Product Specification |
------ |
|
16 |
IS 10307 : 1989 |
Dental instruments - Working parts of burs and cutters, dental - Nominal sizes and designation |
Dimensions |
------ |
|
17 |
IS 10344 : 1982 |
Specification for gag frame, davis - Boyle, and tongue plates |
Product Specification |
------ |
|
18 |
IS 10395 : 1983 |
Specification for Scleral Hook, Eye, Stallard's Pattern |
------ |
------ |
|
19 |
IS 10414 : 1982 |
Specification for scissors, bowel |
Product Specification |
------ |
|
20 |
IS/ISO 10524 Part 1 : 2006 |
Pressure Regulators For Use with Medical Gases Part 1 Pressure Regulators and Pressure Regulators with Flow-Metering Devices |
Product Specification |
------ |
|
21 |
IS/ISO 10524 Part 2 : 2005 |
Pressure Regulators for use with Medical Gases Part 2 Manifold and Line Pressure Regulators |
Product Specification |
------ |
|
22 |
IS/ISO 10524 : Part 3 : 2005 |
Pressure regulators for use with medical gases: Part 3 pressure regulators integrated with cylinder valves |
Product Specification |
------ |
|
23 |
IS 10546 : 1983 |
Forceps, Uterus Holding, Hysteroleb, Dartigue's Pattern |
------ |
------ |
|
24 |
IS 10550 : 1983 |
Specification for medical treatment lamps |
Product Specification |
------ |
|
25 |
IS 10554 : 1983 |
Radiographic intensifying screens for medical use - dimensions |
------ |
------ |
|
26 |
IS/ISO 10555 : PART 2 : 1996 |
Sterile, single-use intravascular catheters-Part 2:Angiographic Catheters |
Product Specification |
------ |
|
27 |
IS/ISO 10555 : PART 5 : 2013 |
Sterile, Single-Use Intravascular Catheters Part 5 Over-Needle Peripheral Catheters |
Methods of tests |
------ |
|
28 |
IS 10568 : 1983 |
Specification for knife, teat, McLean |
Product Specification |
------ |
|
29 |
IS 10578 : 1983 |
Surgical Spring Trusses |
------ |
------ |
|
30 |
IS/ISO 10651 : Part 3 : 1997 |
Lung ventilators for medical use: Part 3 particular requirements for emergency and transport ventilators |
Product Specification |
------ |
|
31 |
IS/ISO 10651 : Part 4 : 2002 |
Lung ventilators for medical use - Particular requirements for basic safety and essential performance: Part 4 particular requirements for operator - Powered resuscitators |
Product Specification |
------ |
|
32 |
IS/ISO 10651 : Part 6 : 2004 |
Lung ventilators for medical use - Particular requirements for basic safety and essential performance: Part 6 home - Care ventilatory support devices |
Product Specification |
------ |
|
33 |
IS 10664 : 2003 |
Dental rotary instruments - Steel and carbide finishing burs (First Revision) |
Product Specification |
------ |
|
34 |
IS 10676 : 1983 |
Spatula, Brain, Double-ended Malleable, Olivecrona's Pattern |
Product Specification |
------ |
|
35 |
IS 10677 : 1983 |
Specification for rongeur, intervertebral disk |
Product Specification |
------ |
|
36 |
IS 10696 : 1983 |
Specification for round segment fused bifocal blanks |
Product Specification |
------ |
|
37 |
IS 10725 : 1983 |
Specification for knife, myringotomy |
Product Specification |
------ |
|
38 |
IS 10726 : 1983 |
Specification for knife, meatal skin incision |
Product Specification |
------ |
|
39 |
IS 10727 : 1983 |
Specification for nail, square, Ulna |
Product Specification |
------ |
|
40 |
IS 10728 : 1983 |
Specification for nail, square, radius |
Product Specification |
------ |
|
41 |
IS 10764 : 1983 |
Boiling Pan, Non-Pressure Type |
------ |
------ |
|
42 |
IS 10765 : 1983 |
Forceps, Dissecting, Toothed and Bayonet Shaped, Cushing's Pattern |
Product Specification |
------ |
|
43 |
IS 10786 : 1984 |
Mirror, Rhinoscopic, ST. Clair Thomson's Pattern |
Product Specification |
------ |
|
44 |
IS 10796 : 1983 |
Lung Ventilators |
------ |
------ |
|
45 |
IS 10797 : 1984 |
Definitions and principles relating to working space of the dentist |
------ |
------ |
|
46 |
IS 10846 : 1984 |
Speculum, Nasal, Killian's Pattern |
Product Specification |
------ |
|
47 |
IS 10848 : 1984 |
Specification For Irrigator Anterior Chamber, Eye, Bishop Harmann's Pattern |
Product Specification |
------ |
|
48 |
IS 10849 : 1984 |
Specification for Cystotome and Curette, Eye, Moorfield's Pattern |
------ |
------ |
|
49 |
IS 10866 : 1984 |
Specification for abrasives dental |
Product Specification |
------ |
|
50 |
IS/ISO 10873 : 2010 |
Dentistry — Denture Adhesives |
Product Specification |
------ |
|
51 |
IS 10916 : 1984 |
Specification for evacuated tubes for blood specimen - Collection (Vacutainers) |
Product Specification |
------ |
|
52 |
IS 10937 : 1984 |
Specification for nose ring and key, bull |
Product Specification |
------ |
|
53 |
IS 10938 : 1984 |
Specification for searcher, double edged with handle and sheath |
Product Specification |
------ |
|
54 |
IS/ISO 10939 : 2007 |
Ophthalmic instruments - Slit - Lamp microscopes |
Methods of tests |
------ |
|
55 |
IS 10953 : 1984 |
Specification for catheter uterine, single channel (Nelson Type) |
Product Specification |
------ |
|
56 |
IS 10955 : 1984 |
Specification for gimlet for trephine |
Product Specification |
------ |
|
57 |
IS 10985 : 1984 |
Specification for needle, acupuncture |
Product Specification |
------ |
|
58 |
IS/ISO 10993 : Part 1 : 2009 |
Biological evaluation of medical devices Part 1 Evaluation and Testing within a risk management process |
Methods of tests |
------ |
|
59 |
IS/ISO 10993 : Part 7 : 2018 |
Biological evaluation of medical devices Part 7 Ethylene oxide sterilization residuals |
Methods of tests |
------ |
|
60 |
IS/ISO 10993 : Part 9 : 2009 |
Biological evaluation of medical devices Part 9 Framework for identification and quantification of potential degradation products |
Methods of tests |
------ |
|
61 |
IS/ISO 10993 : Part 10 : 2010 |
Biological evaluation of medical devices Part 10 Tests for irritation and skin sensitization |
Methods of tests |
------ |
|
62 |
IS/ISO 10993 : Part 15 : 2000 |
Biological evaluation of medical devices: Part 15 identification and quantification of degradation products from metals and alloys |
Methods of tests |
------ |
|
63 |
IS/IEC/TS 10993 : Part 19 : 2006 |
Biological Evaluation of Medical Devices Part 19 Physico-Chemical, Morphological and Topographical Characterization of Materials |
Methods of tests |
------ |
|
64 |
IS 11034 : 2019 |
Implants for surgery ? guidance on care and handling of orthopaedic implants (Second Revision) |
Code of Practice |
------ |
|
65 |
IS/ISO/IEEE 11073 : Part 10201 : 2004 |
Health informatics - Point-of-care medical device communication: Part 10201 domain information model |
Others |
------ |
|
66 |
IS/ISO/IEEE 11073 : Part 10404 : 2010 |
Health informatics - Personal health device communication: Part 10404 device specialization - Pulse oximeter |
Others |
------ |
|
67 |
IS/ISO/IEEE 11073 : Part 10407 : 2010 |
Health Informatics - Personal Health Device Communication Part 10407 Device Specialization - Blood Pressure Monitor |
Others |
------ |
|
68 |
IS/ISO/IEEE 11073 : Part 10408 : 2010 |
Health informatics - Personal health device communication: Part 10408 device specialization - Thermometer |
Others |
------ |
|
69 |
IS/ISO/IEEE 11073 : Part 10415 : 2010 |
Health informatics - Personal health device communication: Part 10415 device specialization - Weighing scale |
Others |
------ |
|
70 |
IS/ISO/IEEE 11073 : Part 10419 : 2016 |
Health informatics - Personal health device communication: Part 10419 device specialization - Insulin pump |
Others |
------ |
|
71 |
IS/ISO/IEEE 11073 : Part 10420 : 2012 |
Health Informatics — Personal Health Device Communication Part 10420 Device Specialization — Body Composition Analyzer |
Others |
------ |
|
72 |
IS/ISO/IEEE 11073 : Part 20601 : 2016 |
Health Informatics — Personal Health Device Communication Part 20601 Application Profile — Optimized Exchange Protoco |
Others |
------ |
|
73 |
IS/ISO/IEEE 11073 : Part 30300 : 2004 |
Health informatics - Point-of-care medical device communication: Part 30300 transport profile - Infrared wireless |
Others |
------ |
|
74 |
IS/ISO 11073 : Part 91064 : 2009 |
Health informatics - Standard communication protocol: Part 91064 computer - Assisted electrocardiography |
Others |
------ |
|
75 |
IS 1108 : 1975 |
Specification for pharmaceutical glass containers (Second Revision) |
Product Specification |
------ |
|
76 |
IS 11088 : 1984 |
Guide for retrieval and analysis of metallic orthopaedic implants |
Code of Practice |
------ |
|
77 |
IS/ISO 11197 : 2016 |
Medical supply units |
Product Specification |
------ |
|
78 |
IS/ISO 11238 : 2012 |
Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of regulated information on substances |
Others |
------ |
|
79 |
IS/ISO 11239 : 2012 |
Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging |
Others |
------ |
|
80 |
IS 11279 : 1985 |
Specification for braille slate |
Product Specification |
------ |
|
81 |
IS 11302 : Part 1 : 1985 |
Electro-encephalograph (EEG) - Part 1 : General and Safety Requirements |
Safety Standard |
------ |
|
82 |
IS 11302 : Part 2 : 1985 |
Specification for electroencephalograph (EEG): Part 2 performance requirements |
Product Specification |
------ |
|
83 |
IS 11331 : 1985 |
Electrical Muscle and Nerve Stimulators for Therapeutic Purpose |
Product Specification |
------ |
|
84 |
IS 11363 : 1985 |
Tubes,breathing,for anaesthetic apparatus and ventilators |
Product Specification |
------ |
|
85 |
IS 11364 : 1994 |
Anaesthetic Reservoir Bags |
Product Specification |
------ |
|
86 |
IS 11400 : 1985 |
Specification for hypodermic syringes, interchangeable type for general purposes |
Product Specification |
------ |
|
87 |
IS 11478 : Part 1 : 1985 |
Application guide for medical electrical equipment: Part 1 General requirements and electrical installations |
Code of Practice |
------ |
|
88 |
IS 11478 : Part 2 : 1985 |
Application guide for medical electrical equipment: Part 2 Safety provisions, application, operation and maintenance |
Code of Practice |
------ |
|
89 |
IS 11566 : 1986 |
Specification for valve retractors |
Product Specification |
------ |
|
90 |
IS 11567 : Part 1 : 1986 |
Specification for holes and slots for metal bone plates: Part 1 corresponding to screws with asymmetrical thread and spherical under - Surfaces |
Dimensions |
------ |
|
91 |
IS 11567 : Part 3 : 1986 |
Specification for holes and slots in metal bone plates: Part 3 corresponding to screws with asymmetrical thread and conical under - Surfaces |
Dimensions |
------ |
|
92 |
IS 11567 : Part 4 : 1986 |
Specification for holes and slots in metal bone plates: Part 4 corresponding to screws with symmetrical thread and conical undersurfaces |
Dimensions |
------ |
|
93 |
IS/ISO 11607 : Part 1 : 2006 |
Packaging for terminally sterilized medical devices: Part 1 requirements for materials, sterile barrier systems and packaging systems |
Code of Practice |
------ |
|
94 |
IS/ISO 11607 : Part 2 : 2006 |
Packaging for terminally sterilized medical devices: Part 2 validation requirements for forming, sealing and assembly processes |
Code of Practice |
------ |
|
95 |
IS 11628 : 1986 |
Specification for agar impression material |
Product Specification |
------ |
|
96 |
IS/ISO/TR 11633 : Part 1 : 2009 |
Health informatics - Information security management for remote maintenance of medical devices and medical information systems: Part 1 requirements and risk analysis |
Others |
------ |
|
97 |
IS/ISO/TR 11633 : Part 2 : 2009 |
Health informatics - Information security management for remote maintenance of medical devices and medical information systems: Part 2 implementation of an information security management system (ISMS) |
Others |
------ |
|
98 |
IS 11661 : 1986 |
Safety of Lung Ventilator for Medical Use |
System Standard |
------ |
|
99 |
IS 11701 : 1986 |
Guide for testing and calibration of ultrasonic therapeutic equipment |
Code of Practice |
------ |
|
100 |
IS 11754 : 1986 |
Implantable Ventricular Pacemaker |
Product Specification |
------ |
|
101 |
IS 11789 : 1986 |
Determination of the maximum symmetrical radiation field in the radiation beam from a rotating anode X-ray tube for medical diagnosis |
Methods of tests |
------ |
|
102 |
IS 11807 : 1994 |
Oropharyngeal Airways |
Product Specification |
------ |
|
103 |
IS 11808 : 1986 |
Tracheal Tubes Connectors |
Product Specification |
------ |
|
104 |
IS 11882 : 1987 |
Frying Pan, Tilting Type (Electrically Operated) |
------ |
------ |
|
105 |
IS 11971 : 1987 |
Jacketed Cooking Vessel,tilting Type (electrically Operated) |
------ |
------ |
|
106 |
IS/ISO 11979 : Part 1 : 2006 |
Ophthalmic implants - Intraocular lenses: Part 1 vocabulary |
Terminology |
------ |
|
107 |
IS/ISO 11979 : Part 5 : 2006 |
Ophthalmic implants - Intraocular lenses: Part 5 biocompatibility |
Methods of tests |
------ |
|
108 |
IS/ISO 11979 : PART 7 : 2006 |
Ophthalmic implants - Intraocular lenses: Part 7 clinical investigations |
Code of Practice |
------ |
|
109 |
IS/ISO 11979 : PART 8 : 2006 |
Ophthalmic implants - Intraocular lenses: Part 8 fundamental requirements |
Product Specification |
------ |
|
110 |
IS/ISO 11979 : Part 10 : 2006 |
Ophthalmic implants - Intraocular lenses: Part 10 phakic intraocular lenses |
Product Specification |
------ |
|
111 |
IS 12024 : 1986 |
Code of practice for field monitoring of movement of structures using tape extensometer |
------ |
------ |
|
112 |
IS 12050 : 1986 |
Specification for sterile hypodermic syringes with needle attached for single use |
Product Specification |
------ |
|
113 |
IS 12165 : 1987 |
Basic Requirements for Orthopedic Joint Prostheses |
Product Specification |
------ |
|
114 |
IS 12227 : 2002 |
Sterile Single-Use Syringes, With or Without Needle, for Insulin |
Service Specification |
------ |
|
115 |
IS 12245 : 1988 |
Specification for dilators, teat (Hudson) |
Product Specification |
------ |
|
116 |
IS 12304 : 1987 |
Specification for plastic cervical collar |
Product Specification |
------ |
|
117 |
IS 12311 : 1987 |
Microwave Diathermy Equipment for Therapeutic Purposes |
Product Specification |
------ |
|
118 |
IS 12329 : 1988 |
Specification for self - Centring bone holding forceps |
Product Specification |
------ |
|
119 |
IS 12375 : Part 3 : 1993 |
Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 3 : Determination of endurance properties of stemmed femorel components without application of torsion |
Methods of tests |
------ |
|
120 |
IS 12375 : Part 5 : 1998 |
Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 5 : Determination of Resistance to Static Load of Head and Neck Region of Stemmed Femoral Components |
Methods of tests |
------ |
|
121 |
IS 12375 : Part 7 : 1998 |
Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 7 : Endurance Performance of Stemmed Femoral Components without Application of Torsion |
Methods of tests |
------ |
|
122 |
IS 12375 : Part 8 : 1998 |
Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 8 : Endurance Performance of Stemmed Femoral Components with Application of torsion |
Methods of tests |
------ |
|
123 |
IS 12375 : Part 9 : 1998 |
Implants for surgery - Partial and total hip joint prostheses Part 9 Determination of resistance to torque of head fixation of stemmed femoral components |
Methods of tests |
------ |
|
124 |
IS 12418 : Part 1 : 1987 |
Intra-Uterine Contraceptive Devices - Part 1 : General Requirements |
------ |
------ |
|
125 |
IS 12418 : Part 2 : 1987 |
Intra-uterine Contraceptive Devices - Part 2 : Determination of Breaking Force |
------ |
------ |
|
126 |
IS 12418 : Part 3 : 1987 |
Intra-uterine Contraceptive Devices - Part 3 : Packaging and Labelling |
------ |
------ |
|
127 |
IS 12418 : Part 4 : 2000 |
Intra-Uterine Contraceptive Devices - - Part 4 : Copper-T (200 B) |
------ |
------ |
|
128 |
IS 12504 : Part 1 : 1988 |
Tracheal Tubes - Part 1 : General Requirements |
Product Specification |
------ |
|
129 |
IS 12504 : Part 2 : 1988 |
Tracheal Tubes - Part 2 : Oro-tracheal and Naso-tracheal Tubes of the Magill Type (Plain and Cuffed) |
Product Specification |
------ |
|
130 |
IS 12504 : Part 3 : 1988 |
Tracheal Tubes - Part 3 : Murphy Type |
------ |
------ |
|
131 |
IS 12504 : Part 4 : 1988 |
Specification for Tracheal Tubes - Part 4 : Cole Type |
------ |
------ |
|
132 |
IS 12504 : Part 5 : 1988 |
Tracheal Tubes - Part 5 : Requirements and Methods of Test for Cuffs and Tubes |
------ |
------ |
|
133 |
IS 12505 : Part 1 : 1988 |
Tracheostomy Tubes, Part:1 Connectors |
Product Specification |
------ |
|
134 |
IS 12505 : Part 2 : 1988 |
Tracheostomy Tubes, Part 2 Basic Requirements |
Product Specification |
------ |
|
135 |
IS 12572 : Part 1 : 1994 |
Biological Evaluation of Medical Devices - Part 1 : Guidance on Selection of Tests |
Code of Practice |
------ |
|
136 |
IS 12572 : Part 2 : 1995 |
Biological evaluation of medical devices: Part 2 animal welfare requirements |
Others |
------ |
|
137 |
IS 12572 : Part 3 : 1988 |
Guide for evaluation of medical devices for biological hazards: Part 3 method of testing by tissue implantation |
Methods of tests |
------ |
|
138 |
IS 12572 : Part 4 : 2016 |
Biological evaluation of medical devices: Part 4 selection of tests for interaction with blood |
Methods of tests |
------ |
|
139 |
IS 12572 : Part 5 : 1988 |
Guide for evaluation of medical devices for biological hazards: Part 5 method of test for intracutaneous reactivity of extracts from medical devices |
Methods of tests |
------ |
|
140 |
IS 12572 : Part 6 : 1988 |
Guide for evaluation of medical devices for biological hazards: Part 6 method of test for systemic toxicity: assessment of pyrogenicity in rabbits of extracts from medical devices |
Methods of tests |
------ |
|
141 |
IS 12572 : Part 7 : 1988 |
Guide for evaluation of medical devices for biological hazards: Part 7 methods of test for sensitization : assessment of potential of medical devices to produce delayed contact dermatitis |
Methods of tests |
------ |
|
142 |
IS 12572 : Part 8 : 1988 |
Guide forevaluationofmedical devices for biological hazards: Part 8 method of test for skin irritation of extracts from medical devices |
Methods of tests |
------ |
|
143 |
IS 12572 : Part 9 : 1988 |
Guide for evaluation of medical devices for biological hazards: Part 9 method of test for skin irritation by solid medical devices |
Methods of tests |
------ |
|
144 |
IS 12572 : Part 10 : 1988 |
Guide for Evaluation of Medical Devices for Biological Hazards Part 10 Biological Testing and Evaluation of Dental Materials |
Methods of tests |
------ |
|
145 |
IS 12572 : Part 11 : 1990 |
Guide for evaluation of medical devices for biological hazards: Part 11 method of test for eye irritation |
Methods of tests |
------ |
|
146 |
IS 12572 : Part 13 : 1995 |
Biological Evaluation of Medical Devices - Part 13 : Tests for Genotoxicity, Carcinogenicity and Reproductive Toxicity |
Methods of tests |
------ |
|
147 |
IS 12572 : Part 14 : 1994 |
Biological Evaluation of Medical Devices - Part 14 : Selection of Tests for Interactions with Blood |
Methods of tests |
------ |
|
148 |
IS 12624 : 2018 |
Dentistry - Root - Canal obturating points (Second Revision) |
Product Specification |
------ |
|
149 |
IS 12655 : Part 4 : 2003 |
Infusion equipment for medical use: Part 4 infusion sets for single use, gravity feed (First Revision) |
Product Specification |
------ |
|
150 |
IS 12721 : 1989 |
Dental Materials - Base Metal Casting Alloys |
------ |
------ |
|
151 |
IS 12721 : Part 1 : 2005 |
Dental base metal casting alloys: Part 1 cobalt - Based alloys (First Revision) |
Product Specification |
------ |
|
152 |
IS 12721 : Part 2 : 2005 |
Dental base metal casting alloys: Part 2 nickel - Based alloys (First Revision) |
Product Specification |
------ |
|
153 |
IS 12797 : 1989 |
Dental materials - Dental glass polyalkenoate cements - Specification |
Product Specification |
------ |
|
154 |
IS 12815 : 1989 |
Surgical instruments - Knife autopsy - Specification |
Product Specification |
------ |
|
155 |
IS 12827 : 1989 |
Non-flammable Medical Gas Pipeline System |
------ |
------ |
|
156 |
IS 12855 : 1989 |
Dental materials - Root canal sealing materials - Specification |
Product Specification |
------ |
|
157 |
IS/ISO 12866 : 1999 |
Ophthalmic instruments - Perimeters |
Product Specification |
------ |
|
158 |
IS/ISO/TR 12885 : 2008 |
Medical Biotechnology And Medical Nanotechnology |
Code of Practice |
------ |
|
159 |
IS/ISO 12891 : Part 2 : 2014 |
Retrieval and analysis of surgical implants Part 2 analysis of retrieved surgical implants |
Methods of tests |
------ |
|
160 |
IS 12901 : 1990 |
ENT surgery instruments - Laryngeal fine grasping forceps, crocodile jaws, straight - Specification |
Product Specification |
------ |
|
161 |
IS 12911 : 1990 |
ENT surgery instruments - Laryngeal forceps, oval cup - Specification |
Product Specification |
------ |
|
162 |
IS 12947 : 1990 |
Eye surgery instruments tonometers - Specification |
Product Specification |
------ |
|
163 |
IS/ISO 12967 : Part 1 : 2009 |
Health informatics - Service architecture: Part 1 enterprise viewpoint |
Others |
------ |
|
164 |
IS/ISO 12967 : Part 2 : 2009 |
Health informatics - Service architecture: Part 2 information viewpoint |
Others |
------ |
|
165 |
IS/ISO 12967 : Part 3 : 2009 |
Health informatics - Service architecture: Part 3 computational viewpoint |
Others |
------ |
|
166 |
IS 13009 : 2000 |
Contraceptive devices - Tubal ring - Specification (First Revision) |
Product Specification |
------ |
|
167 |
IS 13020 : Part 1 : 1991 |
Medical Electrical Equipment - Ultrasonic Therapy Equipment - Part 1 : Particular Requirements for the Safety |
------ |
------ |
|
168 |
IS 13020 : Part 2 : 1990 |
Medical Electrical Equipment - Ultrasonic Therapy Equipment - Part 2 : Constructional and Performance Requirements |
------ |
------ |
|
169 |
IS 13069 : 1991 |
Methods of measuring the performance of ultrasonic pulse-echo diagnostic equipment |
------ |
------ |
|
170 |
IS/ISO 13119 : 2012 |
Health informatics? clinical knowledge resources? metadata |
------ |
------ |
|
171 |
IS 13141 : 1991 |
Neurosurgical Instruments-Leksell's Rongeur |
Product Specification |
------ |
|
172 |
IS 13180 : 1991 |
Neurosurgical instruments - Scoville trephine - Specification |
Product Specification |
------ |
|
173 |
IS 13200 : 2015 |
Anaesthetic and respiratory equipment - Vocabulary (First Revision) |
Terminology |
------ |
|
174 |
IS 13450 : Part 1 : 2018 |
Medical electrical equipment: Part 1 general requirements for basic safety and essential performance (Second Revision) |
Others |
------ |
|
175 |
IS 13450 : Part 1 : Sec 1 : 2006 |
Medical Electrical Equipment : Part 1 General Requirements for Safety , Section 1 Collateral Standard - Safety Requirements for Medical Electrical System |
Safety Standard |
------ |
|
176 |
IS 13450 : Part 1 : SEC 2 : 2018 |
Medical electrical equipment: Part 1 general requirements for the basic safety and essential performance: Sec 2 collateral standard: electromagnetic disturbances - Requirements and tests (First Revision) |
Others |
------ |
|
177 |
IS 13450 : Part 1 : Sec 3 : 2014 |
Medical electrical equipment: Part 1 general requirements for basic safety and essential performance: Sec 3 collateral standard: radiation protection in diagnostic X-ray equipment |
Others |
------ |
|
178 |
IS 13450 : Part 1 : Sec 4 : 2009 |
Medical Electrical Equipment : Part 1 General Requirements for Safety , Section 1 Collateral Standard - Safety Requirements for Medical Electrical System |
Safety Standard |
------ |
|
179 |
IS 13450 : Part 1 : Sec 6 : 2020 |
Medical Electrical Equipment Part 1 General Requirements for Basic Safety and Essential Performance Section 6 Collateral standard: Usability |
Others |
------ |
|
180 |
IS 13450 : Part 1 : Sec 8 : 2019 |
Medical Electrical Equipment Part 1 General Requirements for Basic Safety and Essential Performance Section 8 Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Others |
------ |
|
181 |
IS 13450 : Part 1 : Sec 10 : 2019 |
Medical Electrical Equipment Part 1 General Requirements for Basic Safety and Essential Performance Section 10 Collateral standard: Requirements for the development of physiologic closed-loop controllers |
Others |
------ |
|
182 |
IS 13450 : Part 1 : Sec 11 : 2020 |
Medical Electrical Equipment Part 1 General Requirements for Basic Safety and Essential Performance Section 11 Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
Others |
------ |
|
183 |
IS 13450 : Part 2 : Sec 2 : 2019 |
Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 2 high frequency surgical equipment and high frequency surgical accessories |
Product Specification |
------ |
|
184 |
IS 13450 : Part 2 : Sec 3 : 2022 |
Medical electrical equipment Part 2- Particular requirements for basic safety and essential performance- Sec 3 Short wave therapy equipment |
Product Specification |
------ |
|
185 |
IS 13450 : Part 2 : Sec 7 : 2006 |
Medical Electrical Equipment Part 2 Particular Requirements for the Safety Section 7 High-Voltage Generators of Diagnostic X-Ray Generators |
Safety Standard |
------ |
|
186 |
IS 13450 : Part 2 : Sec 19 : 2018 |
Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 19 baby incubator |
Product Specification |
------ |
|
187 |
IS 13450 : Part 2 : Sec 20 : 2018 |
Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 20 infant transport incubators |
Product Specification |
------ |
|
188 |
IS 13450 : Part 2 : Sec 21 : 2018 |
Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 21 infant radiant warmer |
Product Specification |
------ |
|
189 |
IS 13450 : Part 2 : Sec 22 : 2019 |
Medical electrical equipment: Part 2 particular requirements for basic safety and essential performance: Sec 22 surgical, cosmetic, therapeutic and diagnostic laser equipment |
Product Specification |
------ |
|
190 |
IS 13450 : Part 2 : Sec 26 : 2018 |
Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 26 Electroencephalographs |
Product Specification |
------ |
|
191 |
IS 13450 : Part 2 : Sec 30 : 2008 |
Medical electrical equipment: Part 2 particular requirements for the safety: Sec 30 essential performance of automatic cycling non - Invasive blood pressure monitoring equipmen |
Safety Standard |
------ |
|
192 |
IS 13450 : Part 2 : Sec 31 : 2019 |
Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 31 external cardiac pacemakers with internal power source |
Product Specification |
------ |
|
193 |
IS 13450 : Part 2 : Sec 32 : 2006 |
Medical Electrical Equipment : Part 2 Particular requirements for safety , Section 32 Associated equipment of X-Ray equipment |
Safety Standard |
------ |
|
194 |
IS 13450 : Part 2 : Sec 43 : 2016 |
Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 43 X-ray equipment for interventional procedures (First Revision) |
Product Specification |
------ |
|
195 |
IS 13450 : Part 2 : Sec 45 : 2016 |
Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 45 mammographic X-ray equipment and mammographic stereotactic devices (First Revision) |
Product Specification |
------ |
|
196 |
IS 13450 : Part 2 : Sec 49 : 2018 |
Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 49 multifunction patient monitoring equipment (First Revision) |
Safety Standard |
------ |
|
197 |
IS 13450 : Part 2 : Sec 54 : 2016 |
Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 54 X-ray equipment for radiography and radioscopy |
Product Specification |
------ |
|
198 |
IS 13450 : Part 2 : Sec 63 : 2016 |
Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 63 dental extra - Oral X-ray equipment |
Product Specification |
------ |
|
199 |
IS 13450 : Part 2 : Sec 65 : 2016 |
Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 65 dental intra - Oral X-ray equipmen |
Product Specification |
------ |
|
200 |
IS 13450 : PART 2 : SEC 24 : 2009 |
Medical Electrical Equipment Part 2 Particular Requirements for the Safety Section 24 Infusion Pumps and Controllers |
Product Specification |
------ |
|
201 |
IS 13450 : PART 2 : SEC 25 : 2018 |
MEDICAL ELECTRICAL EQUIPMENT PART 2 PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE SECTION 25 ELECTROCARDIOGRAPHS |
Code of Practice |
------ |
|
202 |
IS 13450 : PART 2 : SEC 49 : 2018 |
Medical Electrical Equipment Part 2 Particular Requirements for the Safety Section 49 Multifunction Patient Monitoring Equipment |
Product Specification |
------ |
|
203 |
IS/ISO 13450 : Part 2 : Sec 10 : 2018 |
Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 10 Nerve and muscle stimulators |
Product Specification |
------ |
|
204 |
IS 13523 : Part 1 : 1992 |
Medical Electrical Equipment - Shortwave Therapy Equipment: Part 1 General And Safety Requirements |
System Standard |
------ |
|
205 |
IS 13523 : Part 2 : 1992 |
Medical Electrical Equipment - Shortwave Therapy Equipment: Part 2 Performance Requirements |
Product Specification |
------ |
|
206 |
IS/ISO 13606 : Part 1 : 2008 |
Health informatics - Electronic health record communication: Part 1 reference model |
Others |
------ |
|
207 |
IS/ISO 13606-2 : 2008 |
Health informatics - Electronic health record communication: Part 2 archetype interchange specification |
Others |
------ |
|
208 |
IS/ISO 13606-3 : 2009 |
Health informatics - Electronic health record communication: Part 3 references archetypes and term lists |
Others |
------ |
|
209 |
IS/ISO 13606 : Part 5 : 2010 |
Health informatics - Electronic health record communication: Part 5 interface specification |
Others |
------ |
|
210 |
IS 13701 : 2018 |
Dentistry - Test methods for rotary instruments (First Revision) |
Methods of tests |
------ |
|
211 |
IS 13710 : 1993 |
Dental materials - Dental zinc polycarboxylate cements - Specification |
Product Specification |
------ |
|
212 |
IS 13728 : 1993 |
Entrance field sizes of elctro-optical X-ray image intensifiers |
------ |
------ |
|
213 |
IS 13729 : 1993 |
Determination of the luminance distribution of electro-optical X-ray image intensifiers |
------ |
------ |
|
214 |
IS 13767 : 1993 |
Optics - Optical instruments - Contact lenses - Vocabulary and symbols |
------ |
------ |
|
215 |
IS 13807 : 1994 |
Medical radiology - Terminology |
------ |
------ |
|
216 |
IS 13809 : Part 1 : 1993 |
Quality management procedures for diagnostic and blood transfusion services - guidelines: Part 1 Up to 30-bedded hospitals |
Code of Practice |
------ |
|
217 |
IS 13812 : Part 19 : 1994 |
Medical electrical equipment - Particular requirements for safety Part 19 Baby incubators |
Safety Standard |
------ |
|
218 |
IS 13813 : 1993 |
Measurement of the conversion factor of electro-optical X-ray image intensifiers |
------ |
------ |
|
219 |
IS 13814 : 1993 |
Determination of the image distortion of electro - Optical X-ray image intensifiers |
Methods of tests |
------ |
|
220 |
IS 13878 : 1993 |
Extra Corporeal Circuit For Haemodialysers, Haemofilters And Haemoconcentrators |
------ |
------ |
|
221 |
IS 13889 : 1993 |
Wheelchairs - Type Classification Based on Appearance Characteristics |
Others |
------ |
|
222 |
IS 13890 : 1994 |
Haemodialysers, Haemofilters and Haemoconcentrators |
------ |
------ |
|
223 |
IS 13903 : 1993 |
Soft contact lenses - Requirements |
------ |
------ |
|
224 |
IS 13924 : 1994 |
Cardiovascular Implants - Cardiac Valve - Prostheses |
------ |
------ |
|
225 |
IS 13928 : 1993 |
Rigid Contact Lenses - Requirements |
------ |
------ |
|
226 |
IS/ISO 13958 : 2014 |
Concentrates for Haemodialysis and Related Therapies |
Product Specification |
------ |
|
227 |
IS/ISO 13959 : 2014 |
Water for haemodialysis and related therapies |
------ |
------ |
|
228 |
IS/ISO 13960 : 2010 |
Cardiovascular implants and extracorporeal systems - Plasmafilters (First Revision) |
Product Specification |
------ |
|
229 |
IS 13970 : Part 1 : 1995 |
Prosthetics and orthotics - Vocabulary: Part 1 general terms for external limb prostheses and external orthoses |
Terminology |
------ |
|
230 |
IS 13970 : Part 2 : 1994 |
Prosthetics and orthotics vocabulary: Part 2 terms relating to external limb prostheses and wearers of these prostheses |
Terminology |
------ |
|
231 |
IS 13970 : Part 3 : 1994 |
Prosthetics and orthotics vocabulary: Part 3 terms relating to external orthoses |
Terminology |
------ |
|
232 |
IS/ISO/TS 13972 : 2015 |
Health informatics - Detailed clinical models, characteristics and processes |
Others |
------ |
|
233 |
IS 14139 : 2008 |
Neurosurgical implants - Self - Closing intracranial aneurysm clips (First Revision) |
Product Specification |
------ |
|
234 |
IS/ISO 14155 : 2011 |
Clinical investigation of medical devices for human subjects - Good clinical practice |
Methods of tests |
------ |
|
235 |
IS/ISO 14161 : 2009 |
Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results |
Code of Practice |
------ |
|
236 |
IS 14219 : 2001 |
Neurosurgical Implants - Sterile, Single-Use Hydrocephalus Shunts and Components |
------ |
------ |
|
237 |
IS 14239 : 1995 |
Orthopaedic Drilling Instruments - Drill Bits, Taps and Countersink Cutters |
Product Specification |
------ |
|
238 |
IS 14240 : 1995 |
Orthopaedic implants - General requirements for marking, packaging and labelling |
Others |
------ |
|
239 |
IS 14323 : 1996 |
Intra Ocular Lenses |
------ |
------ |
|
240 |
IS/ISO 14708 : Part 2 : 2012 |
Implants for surgery - Active implantable medical devices: Part 2 cardiac pacemakers |
Product Specification |
------ |
|
241 |
IS/ISO 14708 : Part 7 : 2013 |
Implants for surgery - Active implantable medical devices: Part 7 particular requirements for cochlear implant systems |
Product Specification |
------ |
|
242 |
IS 14921 : 2001 |
Neurosurgical Implants Marking and Packaging of Implantable Neural Stimulators |
Product Specification |
------ |
|
243 |
IS/ISO 14971 : 2007 |
Medical devices - Application of risk management to medical devices |
Code of Practice |
------ |
|
244 |
IS 15102 : 2002 |
Plastics Collapsible Containers for Human Blood and Blood Components |
Product Specification |
------ |
|
245 |
IS 15110 : 2002 |
Veterinary thermometers, mercury - In - Glass type - Specification |
Product Specification |
------ |
|
246 |
IS/ISO 15189 : 2012 |
Medical laboratories - Requirements for quality and competence (Second Revision) |
System Standard |
------ |
|
247 |
IS 15311 : Part 1 : 2003 |
Dental Rotary Instruments - Shanks - Part 1 : Shanks Made of Metals |
Product Specification |
------ |
|
248 |
IS 15311 : Part 2 : 2003 |
Dental Rotary Instruments - Shanks - Part 2 : Shanks Made of Plastics |
Product Specification |
------ |
|
249 |
IS 15354 : 2003 |
Single-Use Rubber Examination Gloves |
Product Specification |
------ |
|
250 |
IS 15354 : 2003 |
Single-Use Rubber Examination Gloves |
Methods of tests |
------ |
|
251 |
IS 15354 : Part 1 : 2018 |
Single - Use medical examination gloves: Part 1 specification for gloves made from rubber latex or rubber solution (First Revision) |
Product Specification |
------ |
|
252 |
IS 15354 : Part 2 : 2018 |
Single - Use medical examination gloves: Part 2 specification for gloves made from poly (Vinyl Chloride) (First Revision) |
Product Specification |
------ |
|
253 |
IS 15537 : 2004 |
Injection equipment for medical use - Ampoules for injectables |
Product Specification |
------ |
|
254 |
IS/ISO/TS 15539 : 2000 |
Cardiovascular Implants -- EndovascuLar Prostheses |
Product Specification |
------ |
|
255 |
IS 15579 : 2005 |
Medical devices -Quality management systems-Requirements for regulatory purposes |
------ |
------ |
|
256 |
IS/ISO 1563 : 1990 |
Dental alginate impression material |
Product Specification |
------ |
|
257 |
IS/ISO 15676 : 2005 |
Cardiovascular Implants and Artificial Organs - Requirements for Single- Use Tubing Packs for Cardiopulmonary Bypass and Extracorporeal Membrane Oxygenation (ECMO) |
Product Specification |
------ |
|
258 |
IS 15732 : Part 4 : 2006 |
Optics and photonics - Medical endoscopes and endotherapy devices: Part 4 determination of maximum width of insertion portion |
Product Specification |
------ |
|
259 |
IS/ISO 15798 : 2013 |
Ophthalmic implants - Ophthalmic viscosurgical devices |
Product Specification |
------ |
|
260 |
IS/ISO/TS 15883 : Part 5 : 2005 |
Washer-disinfectors — Part 5: Test soils and methods for demonstrating cleaning efficacy |
Service Specification |
------ |
|
261 |
IS 16004 : 2013 |
Hypodermic needles for single use - Colour coding for identification |
Code of Practice |
------ |
|
262 |
IS/ISO 16038 : 2005 |
Rubber condoms - Guidance on the use of IS/ISO 4074 in the quality management of natural rubber latex condoms |
Code of Practice |
------ |
|
263 |
IS/ISO/TR 16056 : Part 1 : 2004 |
Health informatics - Interoperability of telehealth systems and networks: Part 1 introduction and definitions |
Others |
------ |
|
264 |
IS/ISO/TR 16056 : Part 2 : 2004 |
Health informatics - Interoperability of telehealth systems and networks: Part 2 real - Time systems |
Others |
------ |
|
265 |
IS/ISO 16628 : 2008 |
Tracheobronchial tubes - Sizing and marking |
Product Specification |
------ |
|
266 |
IS/ISO 16672 : 2015 |
Ophthalmic implants - Ocular endotamponades |
Product Specification |
------ |
|
267 |
IS/ISO/TS 16791 : 2014 |
Health informatics - Requirements for international machine - Readable coding of medicinal product package identifiers |
Others |
------ |
|
268 |
IS/ISO 17115 : 2007 |
Health informatics - Vocabulary for terminological systems |
Terminology |
------ |
|
269 |
IS 17154 : 2019 |
Battery operated motorized tricycle - Specification |
Product Specification |
------ |
|
270 |
IS/ISO 17432 : 2004 |
Health informatics - Messages and communication - Web access to dicom persistent objects |
Others |
------ |
|
271 |
IS/ISO 17593 : 2007 |
Clinical laboratory testing and in vitro medical devices - Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy |
Code of Practice |
------ |
|
272 |
IS 17647 : Part 1 : 2021 |
Biotechnology - Ancillary materials present during the production of cellular therapeutic products Part 1: General requirements |
Product Specification |
------ |
|
273 |
IS 17647 : Part 2 : 2021 |
Biotechnology - Ancillary materials present during the production of cellular therapeutic products Part 2: Best practice guidance for ancillary material suppliers |
Product Specification |
------ |
|
274 |
IS 17647 : Part 3 : 2021 |
Biotechnology - Ancillary materials present during the production of cellular therapeutic products Part 3: Best practice guidance for ancillary material users |
Others |
------ |
|
275 |
IS/ISO 17664 : 2017 |
Processing of health care products Information to be provided by the medical device manufacturer for the processing of medical devices |
Others |
------ |
|
276 |
IS 17723 : 2021 |
Point-of-care testing POCT Requirements for quality and competence |
Methods of tests |
------ |
|
277 |
IS 17751 : Part 2 : 2022 |
Cardiovascular implants and extracorporeal systems Vascular device-drug combination products Part 2: Local regulatory information |
Code of Practice |
------ |
|
278 |
IS 17767 : 2022 |
Health Informatics - Business Requirements for a Syntax to Exchange Structured Dose Information for Medicinal Products |
Methods of tests |
------ |
|
279 |
IS/ISO/TS 17975 : 2015 |
Health Informatics — Principles and Data Requirements for Consent in the Collection, Use or Disclosure of Personal Health Information |
Others |
------ |
|
280 |
IS/ISO 18369 :Part1 : 2006 |
Ophthalmic optics - Contact lenses: Part 1 vocabulary, classification system and recommendations for labelling specifications |
Terminology |
------ |
|
281 |
IS/ISO 18369 : Part 2 : 2006 |
Ophthalmic optics - Contact lenses: Part 2 tolerances |
Dimensions |
------ |
|
282 |
IS/ISO 18369 : Part 3 : 2006 |
Ophthalmic Optics - Contact Lenses Part - 3 Measurement Methods |
Methods of tests |
------ |
|
283 |
IS/ISO 18369 :Part 4 : 2006 |
Ophthalmic Optics - Contact Lenses Part - 4 Physicochemical Properties of Contact Lens Materials |
Methods of tests |
------ |
|
284 |
IS 1984 : Part 1 : 2003 |
Injection Containers for Injectables and Accessories - Part 1 : Injection Vials Made of Glass Tubing |
------ |
------ |
|
285 |
IS 1984 : Part 2 : 2003 |
Injection containers for injectable and accessories: Part 2 injection vials made of moulded glass (Second Revision) |
Product Specification |
------ |
|
286 |
IS/ISO/TS 20658 : 2017 |
Medical Laboratories - Requirements for Collection, Transport, Receipt, and Handling of Samples |
Code of Practice |
------ |
|
287 |
IS/ISO 20776 : Part 2 : 2007 |
Clinical Laboratory Testing and In-vitro Diagnostic Test Systems - Susceptibility Testing of Infectious Agents and Evaluation of Performance of Antimicrobial Susceptibility Test Devices Part 2 Evaluation of Performance of Antimicrobial Susceptibility Test Devices |
Methods of tests |
------ |
|
288 |
IS/ISO 21563 : 2013 |
Dentistry - Hydrocolloid impression materials |
------ |
------ |
|
289 |
IS/ISO/TR 22221 : 2006 |
Health Informatics — Good Principles and Practices for a Clinical Data Warehouse |
Others |
------ |
|
290 |
IS/ISO 22857 : 2013 |
Health informatics - Guidelines on data protection to facilitate trans - Border flows of personal health data |
Others |
------ |
|
291 |
IS/ISO 23500 : 2014 |
Guidance for the preparation and quality management of fluids for haemodialysis and related therapies |
------ |
------ |
|
292 |
IS/ISO 24234 : 2015 |
Dentistry - Dental amalgam |
Product Specification |
------ |
|
293 |
IS/ISO/TR 24971 : 2013 |
Medical devices - Guidance on the application of ISO 14971 |
Code of Practice |
------ |
|
294 |
IS/ISO/TS 25238 : 2007 |
Health Informatics - Classification of Safety Risks from Health Software |
Others |
------ |
|
295 |
IS/ISO 25539 : Part 2 : 2012 |
Cardiovascular implants - Endovascular devices: Part 2 vascular stents |
Product Specification |
------ |
|
296 |
IS/ISO 25841 : 2014 |
Female condoms - Requirements and test methods |
------ |
------ |
|
297 |
IS/ISO 27789 : 2013 |
Health informatics - Audit trails for electronic health records |
Others |
------ |
|
298 |
IS/ISO/TR 27809 : 2007 |
Health informatics - Measures for ensuring patient safety of health software |
Others |
------ |
|
299 |
IS 3234 : Part 1 : 1986 |
Specification for conical fittings with a 6% (Luer) taper for syringes, needles and other medical equipment: Part 1 general requirements (Second Revision) |
Product Specification |
------ |
|
300 |
IS 3234 : Part 2 : 1995 |
Conical flTttNgs with a 6% (Luer) taper for syringes, needles and certain other medical equipment: Part 2 lock fittings |
Product Specification |
------ |
|
301 |
IS 3235 : 1988 |
General requirements for syringes for medical use (Second Revision) |
Product Specification |
------ |
|
302 |
IS 3238 : 1965 |
Dimensions for hypodermic syringes, interchangeable type |
------ |
------ |
|
303 |
IS 3317 : 2004 |
Hypodermic Needles-reusable Type-specification |
------ |
------ |
|
304 |
IS 3393 : 1965 |
Specification for mouth props and airways (London Hospital Pattern) |
Product Specification |
------ |
|
305 |
IS 3642 : 1978 |
General requirements for surgical instruments |
------ |
------ |
|
306 |
IS 3740 : 1966 |
Specification for tubes, glass, for pathological work |
Product Specification |
------ |
|
307 |
IS 3760 : 1966 |
Probe, Aural, Jobson Horne's Pattern |
Product Specification |
------ |
|
308 |
IS 3788 : 1966 |
Specification for specula, aural |
Product Specification |
------ |
|
309 |
IS 3807 : 2000 |
Ent surgery instruments - Forceps, dressing, aural and nasal - Specification (First Revision) |
Product Specification |
------ |
|
310 |
IS/ISO 3826 : Part 1 : 2013 |
Plastics collapsible containers for human blood and blood components: Part 1 conventional containers |
Product Specification |
------ |
|
311 |
IS 3879 : 1967 |
Specification for wax spatula, dental |
Product Specification |
------ |
|
312 |
IS 3887 : 1978 |
General requirements for cutting type dental instruments (First Revision) |
Product Specification |
------ |
|
313 |
IS 3888 : 1987 |
Specification for spatula, stainless steel, dental (First Revision) |
Product Specification |
------ |
|
314 |
IS 3949 : 1971 |
Dimensions and Screw Thread for Lamp Used in Laryngoscopes |
Product Specification |
------ |
|
315 |
IS 3991 : 1993 |
Bowls, Lotion |
------ |
------ |
|
316 |
IS 3995 : 1980 |
Mugs |
------ |
------ |
|
317 |
IS 3996 : 1982 |
Spittoons |
------ |
------ |
|
318 |
IS 3998 : 1982 |
Cups, Medicine |
------ |
------ |
|
319 |
IS 4068 : 1967 |
Specification for broken brick (Burnt Clay) coarse aggregate for use in lime concrete |
------ |
------ |
|
320 |
IS 4069 : 1967 |
Specification for urinometer |
Product Specification |
------ |
|
321 |
IS 4087 : 1980 |
Specification for pipette for haemoglobinometers and blood pipette for biochemical work (First Revision) |
Product Specification |
------ |
|
322 |
IS 4089 : 1967 |
Forceps, Clip Removing, Michel Pattern |
------ |
------ |
|
323 |
IS 4113 : Part 1 : 2003 |
Laryngoscopic fittings: Part 1 conventional hook - On type handle - Blade fittings (Second Revision) |
Product Specification |
------ |
|
324 |
IS 4113 : Part 2 : 2003 |
Laryngoscopic fittings: Part 2 miniature electric lamps - Screw threads and sockets for conventional blades (Second Revision) |
Product Specification |
------ |
|
325 |
IS 4153 : 1967 |
Trolleys for gas anaesthetic apparatus |
------ |
------ |
|
326 |
IS 4313 : 1985 |
Pliers, Plate, Dental |
------ |
------ |
|
327 |
IS 4314 : 1991 |
Orthodontic Pliers, Cone Socket - Shape, Dimensions and Tests |
------ |
------ |
|
328 |
IS 4315 : 1985 |
Pliers, Bar Bending, Dental, Waldsach's Type |
------ |
------ |
|
329 |
IS 4319 : Part 1 : 1986 |
Pliers, Stretching and Contouring, Dental - Part 1 : Pliers, Stretching and Contouring |
------ |
------ |
|
330 |
IS 4364 : 1967 |
Specification for pipettes, serological |
Product Specification |
------ |
|
331 |
IS 4382 : 1967 |
Specification For Non-Tinted Ophthalmic Glass |
Product Specification |
------ |
|
332 |
IS 4444 : 1967 |
Specification for bottles, bacteriological |
Product Specification |
------ |
|
333 |
IS 4510 : 1978 |
Redesignated as IS 3829 : Part 2 |
------ |
------ |
|
334 |
IS 4533 : 1995 |
Suction apparatus - Specification (Second Revision) |
Product Specification |
------ |
|
335 |
IS 4538 : 1968 |
Refrigeration type oxygen tent units for oxygen therapy |
------ |
------ |
|
336 |
IS 4557 : 1968 |
Appliances office, flat adjustable for artificial limbs |
------ |
------ |
|
337 |
IS 4608 : 1968 |
Brush-holding device for artificial limbs |
------ |
------ |
|
338 |
IS 4612 : 1968 |
C-hook terminal device, spring loaded, for artificial limbs |
------ |
------ |
|
339 |
IS 4657 : 1968 |
Ring Device For Artificial Limbs |
------ |
------ |
|
340 |
IS 4676 : 1968 |
Workshop-tool-holding device for artificial limbs |
------ |
------ |
|
341 |
IS 4678 : 1967 |
Universal device for artificial limbs |
------ |
------ |
|
342 |
IS 4679 : 1968 |
Specification for spatula, plaster, dental, curved and straight |
Product Specification |
------ |
|
343 |
IS 4680 : 1968 |
Specification ,for spatula, wax, dental, No. 2 |
Product Specification |
------ |
|
344 |
IS 4689 : 1968 |
Enamel hatched, dented, No. EH 1/2 |
------ |
------ |
|
345 |
IS 4708 : 1968 |
Specification for urine glass, conical |
Product Specification |
------ |
|
346 |
IS 4715 : 1968 |
Specification for excavators, dental, No. Ex 112, 3/4, 516, 718, s/10, 11112 and 13/14 z |
Product Specification |
------ |
|
347 |
IS 4716 : 1993 |
Dental instruments - Dental probes |
------ |
------ |
|
348 |
IS 4754 : 1968 |
Specification for staining troughs and jar |
Product Specification |
------ |
|
349 |
IS 4788 : 1986 |
Knife, Eye, Capsulotomy Ziegler's Pattern (Modified) |
------ |
------ |
|
350 |
IS 4789 : 1986 |
Knife, Eye, Cataract, Graefe's Pattern (Modified) |
------ |
------ |
|
351 |
IS 489 : Part 1 : 1973 |
Glass Ampoules - Part I : Ampoules for Liquid Injectables |
------ |
------ |
|
352 |
IS 489 : Part 2 : 1973 |
Glass Ampoules - Part II : Ampoules for lyophilized injectable |
------ |
------ |
|
353 |
IS 490 : 1967 |
Vaccine Phials |
------ |
------ |
|
354 |
IS 4976 : 1987 |
Specification for forceps extraction, dental, upper anteriors, No. 1 and 2 (First Revision) |
Product Specification |
------ |
|
355 |
IS 4977 : 1968 |
Forceps, Extraction, Dental, Lower Molar, Hawk's Bill, No. 1 |
Product Specification |
------ |
|
356 |
IS 4978 : 1985 |
Specification for forceps, eye, fixation (Toothed) (First Revision) |
Product Specification |
------ |
|
357 |
IS 5004 : 1968 |
Specification for spoons, cutting dental, No. 1/2, 3/4 and 5/6 |
Product Specification |
------ |
|
358 |
IS 5005 : 1968 |
Specification for burnisher, dental, No. BRN 1/2 |
Product Specification |
------ |
|
359 |
IS 5013 : 1969 |
Tooth-Brush-holding terminal device for artificial limbs |
------ |
------ |
|
360 |
IS 5014 : 1969 |
Telephone-receiver-holding device for artificial limbs |
------ |
------ |
|
361 |
IS 5016 : 1968 |
Safety Razor Holding Device For Artificial Limbs |
------ |
------ |
|
362 |
IS 5017 : 1968 |
Specification for carvers, dental, No. CAR 1/2, 314 and 5/6 |
Product Specification |
------ |
|
363 |
IS 5023 : 2003 |
Dental units (First Revision) |
Product Specification |
------ |
|
364 |
IS 5090 : 1969 |
Blade Plate, Moore Type |
------ |
------ |
|
365 |
IS 5110 : 1969 |
Specification for Corneal Loupe |
------ |
------ |
|
366 |
IS 5140 : 1969 |
Specification for auriscope |
Product Specification |
------ |
|
367 |
IS 5143 : 1988 |
Specification for adjustable axillary crutches (Second Revision) |
Product Specification |
------ |
|
368 |
IS 5147 : 1969 |
SPECIFICATION FOR EXAMINATION LAMP WITH BULL'S EYE CONDENSER (FLOOR MODEL) |
Product Specification |
------ |
|
369 |
IS 5156 : 1969 |
Calorimeter Cup, Duboscq Type |
------ |
------ |
|
370 |
IS 5170 : 1969 |
Bone Plate, Sherman Type |
------ |
------ |
|
371 |
IS 5171 : 1969 |
Bone plate, kessel, osteotomy |
------ |
------ |
|
372 |
IS 5179 : 1986 |
Specification for pluggers, root canal, dental, No. PLG 1, 2 and 3 (First Revision) |
Product Specification |
------ |
|
373 |
IS 5180 : 1969 |
Specification for needles, hypodermic, dental |
Product Specification |
------ |
|
374 |
IS 5185 : 1969 |
Specification for articulators, dental |
Product Specification |
------ |
|
375 |
IS 5226 : 1989 |
Eye surgery instruments - Forceps, eye, corneo-scleral disc, Elliot's pattern - (Modified)-Specification |
------ |
------ |
|
376 |
IS 5227 : 1969 |
Specification for flasks, dental |
Product Specification |
------ |
|
377 |
IS 5231 : 1990 |
Eye surgery instruments - Forceps, eye tarsal cyst, Green's pattern (modified) - Specifcation |
------ |
------ |
|
378 |
IS 5232 : 1990 |
Eye Surgery Instruments - Forceps, Eye, Cilia, Beer's Pattern (Modified) - Specification (Second Revision) |
Product Specification |
------ |
|
379 |
IS 5233 : 1990 |
Eye surgery instruments - Forceps, eye, intra-capsular, arruga's and Elschnig's pattern (Modified) |
------ |
------ |
|
380 |
IS 5234 : 1989 |
Eye surgery instruments - Forceps, eye,extra capsule, Couper's pattern (modified) |
------ |
------ |
|
381 |
IS 5335 : 1969 |
Tables, bedsides |
------ |
------ |
|
382 |
IS 5338 : 1969 |
Specification for catheter, eustachian |
Product Specification |
------ |
|
383 |
IS 5347 : Part 2 : 1993 |
Requirements for orthopaedic Implants Part 2 Wrought stainless steel |
Methods of tests |
------ |
|
384 |
IS 5347 : Part 3 : 1996 |
Requirements for orthopaedic implants Part 3 Unalloyed titanium |
Methods of tests |
------ |
|
385 |
IS 5347 : Part 4 : 1996 |
Requirements for orthopaedic implants Part 4 Wrought titanium 6-aluminium 4- vanadium alloy |
Methods of tests |
------ |
|
386 |
IS 5347 : Part 5 : 2000 |
Requirements for Orthopaedic Implants - Part 5 : Cobalt-chromium-molybdenum Casting Alloy |
Methods of tests |
------ |
|
387 |
IS 5347 : Part 6 : 1996 |
Requirements for orthopaedic implants Part 6 Wrought-cobalt-chromium tungsten-nickel alloy |
Methods of tests |
------ |
|
388 |
IS 5347 : Part 7 : 2002 |
Requirements for Orthopaedic Implants - Part 7 : Wrought Cobalt-Nickel-Chromium-Molybdenum Alloy |
Methods of tests |
------ |
|
389 |
IS 5347 : Part 8 : 1997 |
Requirements for orthopaedic implants Part 8 Forgeable and cold-formed-cobalt-chromium-nickel-molybdenum-iron alloy |
Methods of tests |
------ |
|
390 |
IS 5347 : Part 9 : 1998 |
Requirements for orthopaedic implants: Part 9 ceramic materials based on high purity alumina (First Revision) |
Methods of tests |
------ |
|
391 |
IS 5347 : Part 10 : 1987 |
Requirements for orthopaedic implants: Part 10 ultra - High molecular weight polyethylene, powder form |
Methods of tests |
------ |
|
392 |
IS 5347 : Part 11 : 1987 |
Requirements for orthopaedic implants: Part 11 ultra - High molecular weight polyethylene, moulded form |
Methods of tests |
------ |
|
393 |
IS 5347 : Part 12 : 1993 |
Requirements for orthopaedic implants Part 12 Wrought cobalt-nickel-chromium molybdenum tungsten iron alloy |
Methods of tests |
------ |
|
394 |
IS 5347 : Part 13 : 1997 |
Requirements for orthopaedic implants Part 13 Wrought high nitrogen stainless steel |
Methods of tests |
------ |
|
395 |
IS 5347 : Part 14 : 1997 |
Requirements for orthopaedic implants Part 14 Wrought titanium 5-aluminium 2,5-iron alloy |
Methods of tests |
------ |
|
396 |
IS 5347 : Part 15 : 1997 |
Requirements for orthopaedic implants Part 15 Wrought titanium 6-aluminium 7-niobium alloy |
Methods of tests |
------ |
|
397 |
IS 5347 : Part 16 : 2002 |
Requirements for Orthopaedic Implants - Part 16 : Poly (L-Lactide) Resins and Fabricated Forms for Surgical Implants - In Vitro Degradation Testing |
Methods of tests |
------ |
|
398 |
IS 5347 : Part 18 : 2002 |
Requirements for orthopedic implants: Part 18 ceramic materials based on yttria - Stabilized tetragonal zirconia (Y - TZP) |
Methods of tests |
------ |
|
399 |
IS 5355 : 1969 |
Oxygen flowmeter (dry bobbin type for therapy purposes) |
------ |
------ |
|
400 |
IS 5357 : 1969 |
Metallic Ear Syringe |
Product Specification |
------ |
|
401 |
IS/ISO 5366 : PART 1 : 2000 |
Anaesthetic and respiratory equipment - Tracheostomy tubes: Part 1 tubes and connectors for use in adults |
Product Specification |
------ |
|
402 |
IS/ISO 5367 : 2000 |
Breathing tubes intended for use with anaesthetic apparatus and ventilators |
Product Specification |
------ |
|
403 |
IS 5392 : 1969 |
Bone Plates, Eggers Type |
------ |
------ |
|
404 |
IS 5393 : 1969 |
Specification for screws, bone |
Product Specification |
------ |
|
405 |
IS 5394 : 1969 |
Specification for prostheses, hip |
Product Specification |
------ |
|
406 |
IS 5413 : 1969 |
Conical fittings for to-and-fro carbon dioxide absorber (water type) for use with anaesthetic apparatus |
------ |
------ |
|
407 |
IS 5540 : 1970 |
Pliers, Band Forming, Dental |
------ |
------ |
|
408 |
IS 5541 : 1970 |
Specification for spatula, plastics, clear and colourless, dental |
Product Specification |
------ |
|
409 |
IS 5564 : 1970 |
Humidifiers-gas (bubble type) |
------ |
------ |
|
410 |
IS 5581 : 1970 |
Specification for Stirrup, Bohler's |
Product Specification |
------ |
|
411 |
IS 5584 : 1970 |
Specification for syringe, hypodermic, cartridge, dental, pivot breech cap type |
Product Specification |
------ |
|
412 |
IS 5587 : 1970 |
Hand, Dress |
------ |
------ |
|
413 |
IS 5588 : 1970 |
Quadriceps Boots |
------ |
------ |
|
414 |
IS 5602 : 1970 |
Specification for Anaesthetic Breathing Bags |
------ |
------ |
|
415 |
IS 5645 : 1970 |
Pedestal Cuspidor |
------ |
------ |
|
416 |
IS 5655 : 1970 |
Foot-operated dental engine |
------ |
------ |
|
417 |
IS 5668 : 1989 |
Eye surgery instruments - Forceps, eye, dissecting, serrated, fine specification (First Revision) |
Product Specification |
------ |
|
418 |
IS 5678 : 1970 |
Specifications For Forceps, Eye, Conjunctival, Suture (Moorfield's Pattern) |
Product Specification |
------ |
|
419 |
IS 5695 : 1970 |
Spectacle Lenses |
------ |
------ |
|
420 |
IS 5720 : 1970 |
Retractor, Mastold, Self-Retaining (Mollison's pattern) |
Product Specification |
------ |
|
421 |
IS 5721 : 1970 |
Specification For Forceps, Eye, Peripheral Iridectomy (Sinclair's Pattern) |
Product Specification |
------ |
|
422 |
IS 5723 : 1970 |
Specification for mallet with fluted handle for ENT surgery |
Product Specification |
------ |
|
423 |
IS 5732 : 1970 |
Gouge, Mastoid (Jenkins' Pattern) |
Product Specification |
------ |
|
424 |
IS 5747 : 1970 |
SPECIFICATION FOR RETRACTOR, ENDAURAL ( LEMPERT'S PATTERN ) |
Product Specification |
------ |
|
425 |
IS 5764 : 1994 |
Bowls, Solution |
------ |
------ |
|
426 |
IS 5782 : 1994 |
Bowls, Sponge |
------ |
------ |
|
427 |
IS 5811 : 1970 |
Hip joint with lock for steel orthopaedic calipers and braces |
------ |
------ |
|
428 |
IS 5828 : 1991 |
Orthodontic pliers, workroom - Shape, dimensions and tests |
------ |
------ |
|
429 |
IS 5830 : 1970 |
Dimensions for transmission coupling (slip-joint) to dental handpieces |
------ |
------ |
|
430 |
IS/ISO 5832 : PART 1 : 2016 |
IMPLANTS FOR SURGERY Â METALLIC MATERIALS PART 1 WROUGHT STAINLESS STEEL |
Others |
------ |
|
431 |
IS/ISO 5832 : PART 2 : 2018 |
Implants for Surgery â Metallic Materials Part 2 Unalloyed Titanium |
Product Specification |
------ |
|
432 |
IS/ISO 5832-3 : 2016 |
Implants for surgery – Metallic materials: Part 3 Wrought Titanium 6 -Aluminium 4 -Vanadium alloy (First Revision) |
Methods of tests |
------ |
|
433 |
IS/ISO 5832 : Part 6 : 1997 |
Implants for surgery – Metallic materials: Part 6 Wrought Cobalt-Nickel-Chromium-Molybdenum alloy |
Product Specification |
------ |
|
434 |
IS/ISO 5832-8 : 1997 |
Implants for surgery - Metallic materials: Part 8 wrought cobalt - Nickel - Chromium - Molybdenum - Tungsten - Iron alloy |
Methods of tests |
------ |
|
435 |
IS/ISO 5832-9 : 2007 |
Implants for surgery - Metallic materials Part 9 wrought high nitrogen stainless steel |
Product Specification |
------ |
|
436 |
IS/ISO 5834 : Part 1 : 2005 |
Implants for surgery - Ultra - HighMolecular - Weight polyethylene: Part 1 powder form |
Product Specification |
------ |
|
437 |
IS/ISO 5834 : Part 2 : 2011 |
Implants for surgery - Ultra - HighMolecular - Weight polyethylene: Part 2 moulded forms |
Product Specification |
------ |
|
438 |
IS/ISO 5840 : 2005 |
Cardiovascular implants - Cardiac valve prostheses |
Product Specification |
------ |
|
439 |
IS/ISO 5840 : Part 2 : 2015 |
Cardiovascular Implants Cardiac Valve Prostheses Part 2 Surgically Implanted Heart Valve Substitutes |
Product Specification |
------ |
|
440 |
IS/ISO 5840 : Part 3 : 2013 |
Cardiovascular Implants Cardiac Valve Prostheses Part 3 Heart Valve Substitutes Implanted by Trans-Catheter Techniques |
Product Specification |
------ |
|
441 |
IS 5846 : 1970 |
Nails, Bone (Smith Petersen and Watson Jones Patterns) |
------ |
------ |
|
442 |
IS 5879 : 1970 |
Specification for punch, rubber dam, dental |
Product Specification |
------ |
|
443 |
IS 5941 : 1970 |
Specification for dental engine, electric |
Product Specification |
------ |
|
444 |
IS 5958 : 1970 |
Reflector And Cheek Retractor, Dental |
------ |
------ |
|
445 |
IS 5965 : 1970 |
Specification for frame, rubber dam, dental |
Product Specification |
------ |
|
446 |
IS 5997 : 1970 |
Holder, Wire and Broach, Dental |
------ |
------ |
|
447 |
IS 6020 : 2003 |
Dental hand instruments - Reusable mirrors and handles (First Revision) |
Product Specification |
------ |
|
448 |
IS 6035 : 1986 |
Specification for zinc phosphate dental cement (First Revision) |
Product Specification |
------ |
|
449 |
IS 6036 : 1987 |
Specification for alginate dental impression (First Revision) |
Product Specification |
------ |
|
450 |
IS 6037 : 1970 |
Specification for zinc oxide - Eugenol dental impression paste |
Product Specification |
------ |
|
451 |
IS 6039 : 1970 |
Specification for zinc oxide - Eugenol dental cement |
Product Specification |
------ |
|
452 |
IS 6043 : 1970 |
Specification for copper phosphate - Zinc phosphate dental cement |
Product Specification |
------ |
|
453 |
IS/IEC 61010 : Part 1 : 2010 |
Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1 General requirements |
Safety Standard |
------ |
|
454 |
IS/IEC 61010 : Part 2-081 : 2009 |
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Part 2-081 Particular Requirements for Automatic and Semi-automatic Laboratory Equipment for Analysis and Other Purposes |
Safety Standard |
------ |
|
455 |
IS 6116 : 1992 |
Dental equipment - Dental paitent chair - Specification (First Revision) |
Product Specification |
------ |
|
456 |
IS/IEC 61675 : Part 1 : 2013 |
Radionuclide imaging devices - Characteristics and test conditions: Part 1 positron emission tomographs |
Methods of tests |
------ |
|
457 |
IS/IEC 61689 : 2013 |
Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 mhz to 5 mhz |
------ |
------ |
|
458 |
IS 6182 : 1971 |
Dimensions for dental cable arm |
------ |
------ |
|
459 |
IS 6183 : 1971 |
Dimensions for dental section arm |
------ |
------ |
|
460 |
IS/IEC/TR 61852 : 1998 |
Medical electrical equipment - Digital imaging and communications in medicine (DICOM) - Radiotherapy objects |
Others |
------ |
|
461 |
IS/IEC/TR 61859 : 1997 |
Guidelines for Radiotherapy Treatment Rooms Design |
------ |
------ |
|
462 |
IS 6208 : 1971 |
Specification for spoons, plastics, measuring, medicine |
Product Specification |
------ |
|
463 |
IS 6233 : 1971 |
Specification for forceps, bone cutting (Stille Liston Pattern) |
Product Specification |
------ |
|
464 |
IS/IEC 62366 : Part 1 : 2015 |
Medical Devices Part 1 Application of Usability Engineering to Medical Devices |
Code of Practice |
------ |
|
465 |
IS 6252 : 1971 |
Scissors Bandage, Lister's Pattern |
Product Specification |
------ |
|
466 |
IS 6281 : 1971 |
Specification for Awl, bone |
Product Specification |
------ |
|
467 |
IS 6282 : 1986 |
Waste Receiver, Dental |
------ |
------ |
|
468 |
IS 6289 : 1971 |
Specification for staple, epiphyseal, orthopaedic |
Product Specification |
------ |
|
469 |
IS 6371 : 1971 |
Forceps, Bone Holding, Lane's, Lane-fagge's and Fergusson's Patterns |
Product Specification |
------ |
|
470 |
IS 6395 : 1989 |
Thoracic Surgery Instruments - Clamps, Auricle, Crafoord's Pattern |
Product Specification |
------ |
|
471 |
IS 6402 : 1986 |
Specification for forceps, rubber dam clamp and cotton roll clamp, dental (First Revision) |
Product Specification |
------ |
|
472 |
IS 6404 : 1971 |
Specification for tweezers, dental, No. 1, 2 and 3 |
Product Specification |
------ |
|
473 |
IS 6415 : 1972 |
Floor springs (Hydraulically Regulated) for heavy doors - Specification (Second Revision) |
------ |
------ |
|
474 |
IS 6423 : 1972 |
Simple single axis steel hip joint for above knee conventional prosthesis |
------ |
------ |
|
475 |
IS 6424 : 1972 |
Simple axis steel knee joint for below knee conventional prosthesis |
------ |
------ |
|
476 |
IS 6442 : 1989 |
Thoracic Surgery Instruments - Shears, Rib, Tudor Edward's Pattern for Posterior End of Ribs - Specification(First Revision) |
Product Specification |
------ |
|
477 |
IS 6462 : 1972 |
Fitting dimensions for dental burs and cutters |
Dimensions |
------ |
|
478 |
IS 6463 : 1972 |
Burs, Antrum (Tilley's Pattern) |
Product Specification |
------ |
|
479 |
IS 6466 : 1989 |
Thoracic and cardiovascular surgery instruments - Needle holders - Specification (First Revision) |
Product Specification |
------ |
|
480 |
IS 6467 : 1989 |
Thoracic Surgery Instruments - Periosteotome, Rib, Alexander's Pattern |
Product Specification |
------ |
|
481 |
IS 6468 : 1989 |
Thoracic Surgery Instruments - Trocar, Empyema, Nelson's Pattern |
Product Specification |
------ |
|
482 |
IS 6469 : 1972 |
Harpoon Trocar (Tilley's Pattern) |
Product Specification |
------ |
|
483 |
IS 6470 : 1972 |
Politzerization Apparatus (Pritchard's pattern) |
Product Specification |
------ |
|
484 |
IS 6472 : 1971 |
General requirements for tinted ophthalmic glass |
Product Specification |
------ |
|
485 |
IS 6473 : 1972 |
Specification for trial spectacle lens sets |
Product Specification |
------ |
|
486 |
IS/ISO 6474 : Part 2 : 2012 |
Implants for surgery – Ceramic materials Part 2 Composite Materials based on a High-Purity Alumina Matrix with Zirconia Reinforcement |
Product Specification |
------ |
|
487 |
IS 6484 : 1972 |
Forceps, Gouge, Orthopaedic Fergusson's Pattern |
Product Specification |
------ |
|
488 |
IS 6485 : 1972 |
Specification for forceps, gouge, angular, orthopaedic |
Product Specification |
------ |
|
489 |
IS 6486 : 1972 |
Forceps, Gouge, Orthopaedic Lane's Pattern |
Product Specification |
------ |
|
490 |
IS 6501 : 1972 |
Forceps, Gouge, Orthopaedic, Stille Luer's Pattern |
Product Specification |
------ |
|
491 |
IS 6513 : 1985 |
Fine Adjustment Valves for Use with Oxygen Cylinders for Oxygen Therapy |
------ |
------ |
|
492 |
IS 6525 : 1972 |
Specification for syringe, hypqdermic, Dental for interchangeable needles |
Product Specification |
------ |
|
493 |
IS 6555 : 1972 |
Specification for dental laboratory plaster |
Product Specification |
------ |
|
494 |
IS 6556 : 1972 |
Dental Impression Plaster |
Product Specification |
------ |
|
495 |
IS 6606 : 1972 |
Albuminometer (Esbach's) with Stopper, Stand and Case |
Product Specification |
------ |
|
496 |
IS 6778 : 1989 |
Thoracic Surgery Instruments - Forceps, Lung, Duval's Pattern |
Product Specification |
------ |
|
497 |
IS 6779 : 1989 |
Thoracic Surgery Instruments - Forceps, Dissecting and Ligature, Mixter's Pattern - Specification (First Revision) |
Product Specification |
------ |
|
498 |
IS 6780 : 1989 |
Thoracic Surgery Instruments - Forceps, Artery, Robert's Pattern, Curved on Flat |
Product Specification |
------ |
|
499 |
IS 6785 : 1982 |
Plate, Bone, Wainwright, Osteotomy |
------ |
------ |
|
500 |
IS 6787 : 1973 |
Plate, Bone, McLaughlin |
------ |
------ |
|
501 |
IS 6790 : 1973 |
Plate, Bone, Intertrochanteric, Thornton Type |
------ |
------ |
|
502 |
IS 6811 : 1972 |
Specification for syringe, water, self - Filling, dental |
Product Specification |
------ |
|
503 |
IS 6814 : 1972 |
Specification for syringe, air and water, dental |
Product Specification |
------ |
|
504 |
IS 6823 : 1972 |
Specification for forceps, extraction, dental, lower molars |
Product Specification |
------ |
|
505 |
IS 6824 : 1972 |
Specification for forceps, extraction, dental, lower wisdom tooth |
Product Specification |
------ |
|
506 |
IS 6825 : 1972 |
Specification for forceps, extraction dental upper cuspids and bicusPids |
Product Specification |
------ |
|
507 |
IS 6826 : 1972 |
Specification for forceps, extraction, dental, lower incisors, cuspids and bicuspids, left |
Product Specification |
------ |
|
508 |
IS 6827 : 1972 |
Specification for forceps, extraction, dental, upper molars, left |
Product Specification |
------ |
|
509 |
IS 6828 : 1972 |
Specification for forceps, extraction, dental, upper molars, right |
Product Specification |
------ |
|
510 |
IS 6856 : 1972 |
Forceps, Extraction, Dental, Upper Root, Narrow Beak |
Product Specification |
------ |
|
511 |
IS 6857 : 1972 |
Separator, Double-Bow, Dental |
------ |
------ |
|
512 |
IS 6858 : 1972 |
Specification for forceps, extraction, dental, lower incisors, cuspids and bicuspids |
Product Specification |
------ |
|
513 |
IS 6859 : 1972 |
Specification for forceps, extraction, dental, upper root, wide beak |
Product Specification |
------ |
|
514 |
IS 6866 : 1986 |
Specification for forceps, extraction, dental, upper wisdom tooth (First Revision) |
Product Specification |
------ |
|
515 |
IS 6867 : 1972 |
Specification for forceps, extraction, dental, upper root, medium beak |
Product Specification |
------ |
|
516 |
IS 6868 : 1991 |
Dental instruments - Dental extraction forceps - Specification (First Revision) |
Product Specification |
------ |
|
517 |
IS 6884 : 1983 |
Dental Silicate Cement |
------ |
------ |
|
518 |
IS 6887 : 2005 |
Dentistry - Denture base polymers (Second Revision) |
Product Specification |
------ |
|
519 |
IS 6888 : 1986 |
Specification for dental inlay casting wax (First Revision) |
Product Specification |
------ |
|
520 |
IS 6943 : 1990 |
Medical Laboratory Glassware - Cover Glass used with Haemocytometer Specification First Revision |
Product Specification |
------ |
|
521 |
IS 6958 : 1973 |
Specification for knife, decapitation |
Product Specification |
------ |
|
522 |
IS 6984 : 1972 |
Polycentric knee joint |
------ |
------ |
|
523 |
IS 6986 : 1973 |
Forceps, Cranioclast and Cephalotribe Combined |
------ |
------ |
|
524 |
IS 6989 : 1973 |
Specification for chisel, post - Mortem |
Product Specification |
------ |
|
525 |
IS 6990 : 1973 |
Specification for knife, brain, post - Mortem |
Product Specification |
------ |
|
526 |
IS 6991 : 1985 |
Radiographic Cassettes |
------ |
------ |
|
527 |
IS 6996 : 1973 |
Specification for knife, cartilage |
Product Specification |
------ |
|
528 |
IS 6998 : 1983 |
Special screw for sach foot |
------ |
------ |
|
529 |
IS 7006 : 1973 |
Specification for visual acuity test charts |
Product Specification |
------ |
|
530 |
IS 7007 : 1973 |
Specification for E.E.N.T. (Eye, Ear, Nose And Throat) diagnostic set |
Product Specification |
------ |
|
531 |
IS 7064 : 1973 |
Radiation protection in medical X-ray equipment operating at 10 kV to 400 kV |
------ |
------ |
|
532 |
IS 7080 : Part 3 : 1992 |
MTP suction apparatus specification: Part 3 electrically operated (Second Revision) |
Product Specification |
------ |
|
533 |
IS 7110 : 1984 |
Specification for pins, rush, intramedullary (First Revision) |
Product Specification |
------ |
|
534 |
IS 7120 : 1973 |
Handles for surgical blades detachable (Bard Parker type) |
------ |
------ |
|
535 |
IS 7139 : 1991 |
Orthodontic Pliers, Arrow Headed,clasp Forming - Shape, Dimensions And Tests |
------ |
------ |
|
536 |
IS 7141 : 1991 |
Dental Instruments - Orthodontic Pliers, Band Forming, Peak's Pattern - Shape, Dimensions and Tests |
------ |
------ |
|
537 |
IS 7176 : 1985 |
Specification for anaesthetic apparatus, drawover portable type (First Revision) |
Product Specification |
------ |
|
538 |
IS 7282 : 1975 |
Chisel, Labyrinth, Straight, Lake's Pattern |
Product Specification |
------ |
|
539 |
IS 7336 : 1974 |
Pliers, Tie Back, Nance Type, Dental |
------ |
------ |
|
540 |
IS 7339 : 1988 |
Pliers, Anterior Band Removing, Dental |
------ |
------ |
|
541 |
IS 7346 : 1987 |
Raspatories, Rib, Semb's Pattern |
Product Specification |
------ |
|
542 |
IS 7348 : Part 1 : 2003 |
Dental vocabulary: Part 1 general and clinical terms |
Terminology |
------ |
|
543 |
IS 7348 : Part 2 : 2003 |
Dental vocabulary: Part 2 dental materials (First Revision) |
Terminology |
------ |
|
544 |
IS 7348 : Part 3 : 2003 |
Dental vocabulary: Part 3 dental instruments (Second Revision) |
Terminology |
------ |
|
545 |
IS 7348 : Part 4 : 1994 |
Dental vocabulary: Part 4 dental equipment (Second Revision) |
Terminology |
------ |
|
546 |
IS 7348 : Part 5 : 1994 |
Dental vocabulary: Part 5 terms associated with testing |
Terminology |
------ |
|
547 |
IS 7352 : 1974 |
Specification for X-ray lead - Rubber protective aprons |
Product Specification |
------ |
|
548 |
IS 7355 : 1987 |
Spreader, Rib, Tuffier's Pattern, Adult Size |
Product Specification |
------ |
|
549 |
IS 7379 : 1987 |
Clamps, Patent Ductus, Potts' Pattern, Straight and Angular |
Product Specification |
------ |
|
550 |
IS 7382 : 1987 |
Shears, Rib, Price Thomas' Pattern |
Product Specification |
------ |
|
551 |
IS/ISO 7396 : Part 1 : 2007 |
Medical gas pipeline systems: Part 1 pipeline systems for compressed medical gases and vacuum |
Code of Practice |
------ |
|
552 |
IS 7398 : 1974 |
Specification For Forceps, Bone Holding, Farabeuf's Pattern |
Product Specification |
------ |
|
553 |
IS 7409 : Part 1 : 2003 |
Anaesthetic and Respiratory Equipment - Conical Connectors - Part 1 : Cones and Sockets |
Product Specification |
------ |
|
554 |
IS 7409 : Part 2 : 1994 |
Anaesthetic and respiratory equipment - Conical connectors: Part 2 screw - Threaded weight - Bearing connectors (Second Revision) |
Product Specification |
------ |
|
555 |
IS 7434 : 1987 |
Retractor, Scapula, Tudor Edward's Pattern |
Product Specification |
------ |
|
556 |
IS/ISO 7439 : 2015 |
Copper - Bearing contraceptive intrauterine devices - Requirements and tests (First Revision) |
Product Specification |
------ |
|
557 |
IS 7454 : 1991 |
Rehabilitation equipment - Wheelchairs, folding, adult size - Specification (First Revision) |
Product Specification |
------ |
|
558 |
IS 7455 : 1974 |
Specification for sterilizer, pressure, hot and cold water |
Product Specification |
------ |
|
559 |
IS/ISO 7492 : 1997 |
Dental explorers |
Product Specification |
------ |
|
560 |
IS 7583 : 1991 |
Medical Electrical Equipment - High Frequency Surgical Equipment |
Product Specification |
------ |
|
561 |
IS 7626 : 1975 |
Forceps, tongue-holding, Moynihan's pattern |
------ |
------ |
|
562 |
IS 7701 : 1975 |
Plates, Bone, Spinal, Meurig Williams |
------ |
------ |
|
563 |
IS 7711 : 1975 |
Curette, Adenoid, Beckmann's Pattern |
Product Specification |
------ |
|
564 |
IS 7757 : 1975 |
Specification for Cystitome, Eye, Moorfield's Pattern |
------ |
------ |
|
565 |
IS 7819 : 1975 |
Specification for mallet, nylon headed, orthopaedic |
Product Specification |
------ |
|
566 |
IS 7860 : 1975 |
Mask, Schimmelbusch's Pattern with Chadborn's Modification |
------ |
------ |
|
567 |
IS 7869 : 1975 |
Spray, De Vilbiss' Pattern |
------ |
------ |
|
568 |
IS 7966 : 1976 |
Specification for dental modelling wax |
Product Specification |
------ |
|
569 |
IS 7971 : 1987 |
Tourniquet, Cardiovascular Rumel-Belmont's Pattern |
Product Specification |
------ |
|
570 |
IS 7972 : 1987 |
Scissors, Dissecting, Metzenbaum's Pattern |
Product Specification |
------ |
|
571 |
IS 8019 : 1976 |
Specification for dental artificial stone |
Product Specification |
------ |
|
572 |
IS 8020 : 1976 |
Specification for baseplate, dental |
Product Specification |
------ |
|
573 |
IS 8021 : 1975 |
Specification for dental sticky wax |
Product Specification |
------ |
|
574 |
IS 8022 : 1976 |
Speciftcation for acrylic resin teeth |
Product Specification |
------ |
|
575 |
IS 8044 : 1976 |
Specification for forceps, extraction, dental, lower molar, children |
Product Specification |
------ |
|
576 |
IS 8045 : 1976 |
Specification for forceps, extraction, dental, lower incisors and canines, children |
Product Specification |
------ |
|
577 |
IS 8046 : 1976 |
Specification for forceps, extraction, dental, upper incisors and canines, children |
Product Specification |
------ |
|
578 |
IS 8047 : 1976 |
Specification for forceps, extraction, dental, upper molar, children |
Product Specification |
------ |
|
579 |
IS 8048 : 1985 |
Specification for electrocardiograph (First Revision) |
Product Specification |
------ |
|
580 |
IS/ISO 80601 : Part 2 : Sec 13 : 2011 |
Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 13 anaesthetic workstation |
Product Specification |
------ |
|
581 |
IS/ISO 80601 : Part 2 : Sec 61 : 2011 |
Medical electrical equipment: Part 2 particular requirements for the basic safety and essential performance: Sec 61 pulse oximeter equipment |
Product Specification |
------ |
|
582 |
IS/ISO 80601 : Part 2 : Sec 12 : 2011 |
MEDICAL ELECTRICAL EQUIPMENT PART 2-12 PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
Product Specification |
------ |
|
583 |
IS/ISO 80601 : Part 2 : Sec 12 : 2011 |
Medical electrical equipment: Part 2 - 12 particular requirements for basic safety and essential performance of critical care ventilators |
Product Specification |
------ |
|
584 |
IS 8086 : 1991 |
Rehabilitation equipment - Wheelchairs, folding, junior size - Specification (First Revision) |
Product Specification |
------ |
|
585 |
IS 8094 : 1976 |
Hook, Cerumen, Cawthorne's Pattern |
Product Specification |
------ |
|
586 |
IS 8128 : 1976 |
Elevator, Farabeuf's Pattern |
Product Specification |
------ |
|
587 |
IS 8129 : 1976 |
Forceps, Tonsil Artery, Curved, Scott's Pattern |
Product Specification |
------ |
|
588 |
IS 8136 : 1976 |
Seeker, Dundas Grant's Pattern |
Product Specification |
------ |
|
589 |
IS 8157 : 1976 |
Forceps, Granulation, Heath's Pattern |
Product Specification |
------ |
|
590 |
IS 8158 : 1976 |
Needle Eye,Bowmans Pattern |
------ |
------ |
|
591 |
IS 8163 : 1976 |
Specification for Knife, Keratome, Eye, Jaeger's Pattern |
------ |
------ |
|
592 |
IS 8176 : 1976 |
Dissectors, Penfield's Pattern |
Product Specification |
------ |
|
593 |
IS 8191 : 1976 |
Retractor, Pillar, Anterior and Tonsil Enucleator, Mollison's Pattern |
Product Specification |
------ |
|
594 |
IS 8207 : 1976 |
Specification for forceps, rongeur, dental |
Product Specification |
------ |
|
595 |
IS 8254 : Part 1 : 1976 |
Valve, Non-Rebreathing - Part I : Ruben's Pattern |
Product Specification |
------ |
|
596 |
IS 8257 : 1976 |
Specification for ophthalmoscope |
Product Specification |
------ |
|
597 |
IS 8260 : Part 1 : 1976 |
Glossary of terms relating to ophthalmic lenses and spectacle frames: Part 1 ophthalmic lenses |
Terminology |
------ |
|
598 |
IS 8260 : Part 2 : 1976 |
Glossary of terms relating to ophthalmic lenses and spectacle frames Part 2 Spectacle frames |
------ |
------ |
|
599 |
IS 8261 : Part 4 : 1998 |
Pins and wires skeletal traction: Part 4 material and mechanical requirements (First Revision) |
Product Specification |
------ |
|
600 |
IS 8283 : 1976 |
Specification for tweezers, soldering |
Product Specification |
------ |
|
601 |
IS 8314 : 1977 |
Forceps, Midwifery, Modified Kedarnath Das' Pattern, without Axis Traction |
Product Specification |
------ |
|
602 |
IS 8326 : 1977 |
Starter, Smith Peterson Nail, Orthopedic |
Product Specification |
------ |
|
603 |
IS 8332 : 1977 |
Specification for handle, saw, Gigli |
Product Specification |
------ |
|
604 |
IS 8342 : 1977 |
Forceps, Midwifery, Modified Kedarnath Das's Pattern, with Axis Traction |
Product Specification |
------ |
|
605 |
IS 8344 : 1977 |
Snare, Aural, Glegg's Pattern |
Product Specification |
------ |
|
606 |
IS/ISO 8362 : PART 1 : 2003 |
Injection containers and accessories: Part 1 injection vials made of glass tubing |
Product Specification |
------ |
|
607 |
IS 8371 : 1977 |
Tubes, Naso-pharyngeal (rubber or plastics) |
------ |
------ |
|
608 |
IS 8380 : 1977 |
Rongeur, Double-Action, Olivecrona's Pattern |
Product Specification |
------ |
|
609 |
IS 8382 : 1977 |
Pressure Regulators, Pre-set Used with Medical Gas Cylinders |
Product Specification |
------ |
|
610 |
IS 8409 : 1991 |
Cardiovascular Surgery Instruments - Dilator, Valve, Tubb's Mitral Pattern |
Product Specification |
------ |
|
611 |
IS 8432 : 1977 |
Specification for tubes, tracheostomy (Rubber Or Plastics) |
Product Specification |
------ |
|
612 |
IS 8458 : 1977 |
Manipulators, Uterine, Dr Purandare's Pattern |
Product Specification |
------ |
|
613 |
IS 8490 : 1977 |
Skin blocks, wooden |
------ |
------ |
|
614 |
IS 8491 : 1977 |
Knee Blocks, Wooden |
------ |
------ |
|
615 |
IS 8527 : 1977 |
Specification for tweezers, extraction, dental |
Product Specification |
------ |
|
616 |
IS 8549 : 1991 |
Cardiovascular surgery instruments - Angled scissors, potts smith pattern - Specification (First Revision) |
Product Specification |
------ |
|
617 |
IS 8550 : 1977 |
Scissors, angled on flat, Potts Smith pattern |
------ |
------ |
|
618 |
IS 8571 : 1977 |
Specification for dental porcelain |
Product Specification |
------ |
|
619 |
IS/ISO 8596 : 2009 |
Ophthalmic Optics - Visual Acuity Testing - Standard and Clinical Optotypes and their Presentation (First Revision) |
Methods of tests |
------ |
|
620 |
IS/ISO 8598 : 1996 |
Optics and optical instruments - Focimeters |
Product Specification |
------ |
|
621 |
IS 8607 : Part 1 : 1977 |
General and safety requirements for electrical equipment used in medical practice: Part 1 General |
------ |
------ |
|
622 |
IS 8607 : Part 2 : 1978 |
General and safety requirements for electrical equipment used in medical practice: Part 2 Protection against electric shock |
------ |
------ |
|
623 |
IS 8607 : Part 3 : 1978 |
General and safety requirements for electrical equipment used in medical practice: Part 3 Protection against mechanical hazards |
------ |
------ |
|
624 |
IS 8607 : Part 4 : 1985 |
General and safety requirements for electrical equipment used in medical practice: Part 4 Protection against unwanted or excessive radiation |
------ |
------ |
|
625 |
IS 8607 : Part 5 : 1983 |
General and Safety Requirements for Electrical Equipment Used in Medical Practice - Part 5 : Protection Against Explosion Hazards |
------ |
------ |
|
626 |
IS 8607 : Part 6 : 1984 |
General and safety requirements for electrical equipment used in medical practice: Part 6 Protection against excessive temperatures, fire and other hazards |
------ |
------ |
|
627 |
IS 8607 : Part 7 : 1985 |
General and safety requirements for electrical equipment used in medical practice: Part 7 Construction |
------ |
------ |
|
628 |
IS 8607 : Part 8 : 1985 |
General and safety requirements for electrical equipment used in medical practice: Part 8 Behaviour and reliability |
------ |
------ |
|
629 |
IS 8609 : 1977 |
Nail, Hip, Jewett Type, for Orthopedic Use |
------ |
------ |
|
630 |
IS/ISO 8624 : 2011 |
Ophthalmic optics - Spectacle frames - Measuring system and terminology |
Dimensions |
------ |
|
631 |
IS/ISO 8637 : 2004 : 2010 |
Cardiovascular implants and extracorporeal systems - Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators (First Revision) |
Product Specification |
------ |
|
632 |
IS/ISO 8638 : 2010 |
Cardiovascular implants and extracorporeal systems - Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters (First Revision) |
Product Specification |
------ |
|
633 |
IS/ISO 8638 : 2004 : 2004 |
Cardiovascular Implants and Artificial Organs Extracorporeal Blood Circuit for Haemodialysers, Haemodiafilters and Haemofilters |
Methods of tests |
------ |
|
634 |
IS 8774 : 1985 |
Specification for Punch Corneoscleral, Holth's Pattern (Modified) |
------ |
------ |
|
635 |
IS 8799 : 1978 |
Specification for rongeur, kerrison |
Product Specification |
------ |
|
636 |
IS 8885 : 1994 |
Medical electrical equipment electromyograph - Specification (First Revision) |
Product Specification |
------ |
|
637 |
IS 8898 : 1978 |
Clamp, anastomosis, Cooley's pattern |
------ |
------ |
|
638 |
IS 8902 : 1978 |
Area exposure product meter |
------ |
------ |
|
639 |
IS 8921 : 1978 |
Augar-extractor, Judet's Pattern |
------ |
------ |
|
640 |
IS 8926 : 1978 |
Bone Skid, Murphy Lane's Pattern |
Product Specification |
------ |
|
641 |
IS/ISO 8980 : Part 1 : 2004 |
Ophthalmic optics - Uncut finished spectacle lenses: Part 1 specifications for single - Vision and multifocal lenses |
Product Specification |
------ |
|
642 |
IS 9003 : 1978 |
Specification for acrylizer (Curing Unit) |
Product Specification |
------ |
|
643 |
IS 9014 : 1979 |
Specification for Raspatory fine, curved right, Zoellner's Pattern |
Product Specification |
------ |
|
644 |
IS 9015 : 1979 |
Raspatory, Fine, Curved Left, Zoellner's Pattern |
Product Specification |
------ |
|
645 |
IS 9016 : 1979 |
Needle, Fine, Spear Pointed, Curved Right, Zoellner's Pattern |
Product Specification |
------ |
|
646 |
IS 9017 : 1979 |
Needle, Fine, Spear Pointed, Curved Left, Zoellner's Pattern |
Product Specification |
------ |
|
647 |
IS 9041 : 1979 |
Specification for elevator, periosteal |
Product Specification |
------ |
|
648 |
IS 9058 : 1979 |
Knife, Upward Cutting, Zoellner's Pattern |
Product Specification |
------ |
|
649 |
IS 9059 : 1979 |
Knife, Downward Cutting, Zoellner's Pattern |
Product Specification |
------ |
|
650 |
IS 9060 : 1979 |
Hook, Small, Zoellner's Pattern |
Product Specification |
------ |
|
651 |
IS 9072 : 1979 |
Specification for rongeur, pituitary |
Product Specification |
------ |
|
652 |
IS 9073 : 1979 |
Specification for neuro - Suction tubes |
Product Specification |
------ |
|
653 |
IS 9074 : 1979 |
Specification for raney clips and clip applicator |
Product Specification |
------ |
|
654 |
IS/ISO 9170 : PART 1 : 2008 |
Terminal units for medical gas pipeline systems: Part 1 terminal units for use with compressed medical gases and vacuum |
Product Specification |
------ |
|
655 |
IS 9173 : 1979 |
Specification for Retinoscope, Self Luminous Type |
------ |
------ |
|
656 |
IS 9265 : 1979 |
Clamp, Compression, Muller's Pattern |
Product Specification |
------ |
|
657 |
IS 9286 : Part 1 : 1988 |
Cardiac Defibrillators - Part 1: Safety Requirements |
------ |
------ |
|
658 |
IS 9286 : Part 2 : 1988 |
Cardiac Defibrillators - Part 2 : Construction and Performance Requirements |
------ |
------ |
|
659 |
IS 9310 : 1979 |
Water Purifier, Potable |
------ |
------ |
|
660 |
IS B9310 : 1979 |
Water Purifier, Potable(BI-LINGUAL) |
------ |
------ |
|
661 |
IS 9318 : 1987 |
Specification for Knife, Eye, Cataract, Sliding in Handle |
------ |
------ |
|
662 |
IS 9395 : 1979 |
Specification for bed, intensive care |
Product Specification |
------ |
|
663 |
IS 9408 : 1986 |
Specification for retractor, self retaining (First Revision) |
Product Specification |
------ |
|
664 |
IS 9410 : Part 1 : 1980 |
Specification for silver clip set: Part 1 forceps, clip cutting and forming |
Product Specification |
------ |
|
665 |
IS 9410 : Part 2 : 1980 |
Specification for silver clip set: Part 2 forceps, clip applying |
Product Specification |
------ |
|
666 |
IS 9410 : Part 3 : 1981 |
Specification for silver clip set: Part 3 rack, clip |
Product Specification |
------ |
|
667 |
IS 9416 : 1980 |
Specification for bladder sound |
Product Specification |
------ |
|
668 |
IS 9471 : Part 3 : 1980 |
Specification for modular lower limb orthotic components: Part 3 stirrup plates |
Product Specification |
------ |
|
669 |
IS 9471 : Part 4 : 1980 |
Specification for modular lower limb orthotic components: Part 4 joint unit, ankle |
Product Specification |
------ |
|
670 |
IS 9471 : Part 6 : 2000 |
Modular lower limb orthotic components part 6 orthotic hip joint (Joint Unit, Hip Drop Lock) - Specification |
Product Specification |
------ |
|
671 |
IS 9471 : Part 7 : 2000 |
Modular lower limb orthotic components - Specification: Part 7 orthotic joint bars, ankle and knee (Upper And Lower) |
Product Specification |
------ |
|
672 |
IS 9479 : 1980 |
Specification for Hook, Fenestra, 25°, 45° and 90° Angle Ear, Shea's Pattern |
Product Specification |
------ |
|
673 |
IS 9480 : 1980 |
Elevators, Left and Right, Ear, Shea's Pattern |
Product Specification |
------ |
|
674 |
IS 9526 : 1980 |
Specification for scissors, stapedectomy, crocodile jaw |
Product Specification |
------ |
|
675 |
IS 9544 : 1980 |
Specification for forceps, stapedectomy, round cup, elongated cup and oval cup jaws |
Product Specification |
------ |
|
676 |
IS 9564 : 1980 |
Specification for forceps, stapedectomy, serrated, smooth and Mc Gee wire closing jaws |
Product Specification |
------ |
|
677 |
IS 9626 : 1990 |
Eye Surgery Instruments - Calipers Castroviejo's Pattern (Modified) Specification (First Revision) |
Product Specification |
------ |
|
678 |
IS 9824 : Part 1 : 1996 |
Transfusion equipment for medical use - Specification: Part 1 glass transfusion bottles, closures and caps (First Revision) |
Product Specification |
------ |
|
679 |
IS 9824 : Part 2 : 1995 |
Transfusion equipment for medical use - Specification: Part 2 blood - Taking set for single use (First Revision) |
Product Specification |
------ |
|
680 |
IS 9824 : Part 3 : 1996 |
Transfusion equipment for medical use - Specification: Part 3 transfusion set for single use (First Revision) |
Product Specification |
------ |
|
681 |
IS 9829 : Part 3 : 1986 |
Metal bone screws: Part 3 Screws with symmetrical thread, conical under surfaces |
------ |
------ |
|
682 |
IS 9829 : Part 4 : 1986 |
Metal bone screws: Part 4 Screws with asymmetrical thread, conical under surfaces |
------ |
------ |
|
683 |
IS 9903 : 1981 |
Specification for brace, skull |
Product Specification |
------ |
|
684 |
IS 9904 : 1981 |
Specification for hooks, dural |
Product Specification |
------ |
|
685 |
IS 9914 : 1981 |
Calipers, Ice Tong, Cone's Pattern |
Product Specification |
------ |
|
686 |
IS 9927 : 1981 |
Clamp, anastomosis, dale-femoral, Popliteal's pattern |
------ |
------ |
|
687 |
IS 9932 : 1981 |
Specification for recommendations for lighting of dental operatories |
Code of Practice |
------ |
|
688 |
IS 9933 : 1981 |
Specification for retractor, brain, malleable |
Product Specification |
------ |
|
689 |
IS 9940 : 1981 |
Specification for trimmers, electrically operated, for dental models |
Product Specification |
------ |
|
690 |
IS 9950 : 1981 |
Specification for clamp, vascular, wister pattern |
Product Specification |
------ |
|
691 |
IS 9951 : 1981 |
Specification for scissors, blunt end, nelson pattern |
Product Specification |
------ |
|
692 |
IS 9982 : 1981 |
Specification for Knife, Keratome, Castroviejo's Pattern |
------ |
------ |
|
693 |
IS 9984 : 1981 |
Specification for cannula, air injection, eye |
Product Specification |
------ |
|
694 |
IS 9987 : 1981 |
Clamps, Multipurpose, De-bakey's Pattern |
Product Specification |
------ |
