|
1 |
IS/ISO 8528 : PART 10 : 1998 |
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets: Part 10 Measurement of Airborne Noise by the Enveloping Surface Method |
Methods of tests |
------ |
|
2 |
IS 10003 : 1988 |
Compression Ignition (Diesel) Engines For Automotive Application |
------ |
------ |
|
3 |
IS 10004 : 1981 |
Performance Requirements for Spark Ignition Engines for Automotive Purposes |
------ |
------ |
|
4 |
IS 10043 : 1994 |
Automotive Vehicles - Symbols For Controls, Indicators And Telltales For Scooters And Motorcycles |
------ |
------ |
|
5 |
IS 10199 : 1982 |
Acceptance tests and trials for fishing vessels |
Code of Practice |
------ |
|
6 |
IS 10256 : 1982 |
Code of practice for installation of stop, tail and turn signal lights for automobiles |
------ |
------ |
|
7 |
IS 10277 : 1982 |
Handle grips for mopeds |
------ |
------ |
|
8 |
IS 10289 : 1982 |
Brake Control Levers for Mopeds |
------ |
------ |
|
9 |
IS 10376 : 1982 |
Performance requirements of braking systems for mopeds |
------ |
------ |
|
10 |
IS 10393 : 1982 |
Specifjcation for electrical connector for tractor - Trailer jumper cable |
Product Specification |
------ |
|
11 |
IS 10399 : 1998 |
Automotive vehicles - Noise emitted by stationary vehicles - Method of measurement (First Revision) |
Methods of tests |
------ |
|
12 |
IS 10413 : 1983 |
Method Of Measurement Of Maximum Speed Of Scooters And Motorcycles |
------ |
------ |
|
13 |
IS 10479 : 1993 |
Code of practice for field control of moisture and compaction of soils for embankment and subgrade |
------ |
------ |
|
14 |
IS 10494 : 1983 |
Specification for wooden sleepers for railway track |
Others |
------ |
|
15 |
IS 10494 : PART 2 : 2011 |
Aircraft ground equipment - Basic requirements: Part 2 safety requirements (First Revision) |
Safety Standard |
------ |
|
16 |
IS 10548 : 1983 |
Plans for fire control and life saving equipment - symbols |
------ |
------ |
|
17 |
IS 10586 : 1983 |
Handle Grips for Scooters and Motorcycles |
------ |
------ |
|
18 |
IS 10616 : 1983 |
Methods of tests for bicycles and sub-assemblies |
------ |
------ |
|
19 |
IS 10694 : Part 8 : 2009 |
Automotive vehicles - Rims - General requirements: Part 8 earthmoving machine rims (First Revision) |
Product Specification |
------ |
|
20 |
IS 10792 : 1984 |
Testing and acceptance criteria of pneumatic coupling between tractors and trailers |
Methods of tests |
------ |
|
21 |
IS 10841 : 1984 |
Front brake control lever for scooters and motorcycles |
------ |
------ |
|
22 |
IS 10854 : Part 4 : 1984 |
Specification for cutter suction dredge components: Part 4 spuds |
Product Specification |
------ |
|
23 |
IS 10854 : Part 1 : 1984 |
Specification - For cutter suction dredge components: Part 1 cutter |
Product Specification |
------ |
|
24 |
IS 10854 : Part 6 : 1993 |
Inland vessels - Cutter suction dredge components: Part 6 cast spud cylinder - General requirements |
Product Specification |
------ |
|
25 |
IS 10854 : Part 3 : 1984 |
Specification for cutter suction dredge components: Part 3 ladder |
Product Specification |
------ |
|
26 |
IS 10854 : Part 5 : 1993 |
Inland vessels - Cutter suction dredge components: Part 5 cast spud point - General requirements |
Product Specification |
------ |
|
27 |
IS 10854 : Part 2 : 1984 |
Specification for cutter suction dredge components: Part 2 Suction Pipe |
Product Specification |
------ |
|
28 |
IS 10914 : Part 5 : 1995 |
Automotive Vehicles - Pneumatic Tyres - Part 5 : Method of Test for Diagonal and Radial Ply Tyres |
------ |
------ |
|
29 |
IS 10914 : Part 2 : 1992 |
Automotive Vehicles - Pneumatic Tyres - Part 2 : Truck, Bus and Light Truck Tyres - Diagonal Ply |
------ |
------ |
|
30 |
IS 10914 : Part 4 : 1992 |
Automotive Vehicles-pneumatic Tyres - Part 4 : Scooter and Scooter Derivatives - Diagonal Ply |
------ |
------ |
|
31 |
IS 10914 : Part 1 : 1991 |
Automotive Vehicles - Pneumatic Tyres - Part 1 : Terms, Definitions and Nomenclature |
------ |
------ |
|
32 |
IS 10914 : Part 3 : 1991 |
Automotive Vehicles - Pneumatic Tyres - Diagonal Ply - Part 3 : Passenger Car Tyres |
------ |
------ |
|
33 |
IS 10939 : 2000 |
Designation system for tyre tube valves for automotive vehicles (First Revision) |
Others |
------ |
|
34 |
IS 10944 : 1983 |
Method of measurement of fuel consumption of mopeds |
------ |
------ |
|
35 |
IS 11028 : 1984 |
Specification for handle bars for mopeds |
Product Specification |
------ |
|
36 |
IS 11030 : 1984 |
Specification for moped seat pillars |
Product Specification |
------ |
|
37 |
IS 11031 : 1984 |
Recommendations for storage and handling of inner tubes, tube valves and flaps for use with pneumatic tyres for automotive vehicles |
Others |
------ |
|
38 |
IS 11094 : 1984 |
Strength performance requirements of service brake components of powered industrial trucks |
Others |
------ |
|
39 |
IS 11140 : 1984 |
Specification for footrest assembly for mopeds |
Product Specification |
------ |
|
40 |
IS 11157 : 1984 |
Pneumatic tyres for mopeds - Diagonal ply |
------ |
------ |
|
41 |
IS 11160 : 1984 |
Guidelines for tools and outfits for ships' machinery |
------ |
------ |
|
42 |
IS 11178 : 1985 |
Recommendations for storage and handling of pneumatic tyres for automotive vehicles |
Others |
------ |
|
43 |
IS 11218 : 1984 |
Marine Valve Hand Wheels |
Product Specification |
------ |
|
44 |
IS 11323 : 1984 |
Specification for steel gate valves for use in marine pipe work system |
Product Specification |
------ |
|
45 |
IS 1133 : 1985 |
Bicycle Bottom Bracket Fixed Ball Cup (PH Type) |
------ |
------ |
|
46 |
IS 11335 : 1995 |
Shipbuilding - Cast iron gate valves for use in marine pipework system - Specification (First Revision) |
Product Specification |
------ |
|
47 |
IS 11341 : 1985 |
Covers for Deck Openings for Pumps for Inland Vessels |
------ |
------ |
|
48 |
IS 1135 : 1995 |
Springs - Leaf Springs Assembly for Automobiles |
Methods of tests |
------ |
|
49 |
IS 11437 : 1985 |
Ground equipment requirement for compatibility with aircraft unit load devices |
Product Specification |
------ |
|
50 |
IS 11474 : 1985 |
General requirements of power operated windlasses and anchor capstans for inland vessels |
Product Specification |
------ |
|
51 |
IS 11509 : Part 6 : 2006 |
Methods of test for full - Flow lubricating oil filters for internal combustion engines: Part 6 cold start simulation and hydraulic pulse durability test (First Revision) |
Methods of tests |
------ |
|
52 |
IS 11509 : Part 5 : 2018 |
Methods of test for full flow lubricating oil filters for internal combustion engines: Part 5 test for cold start simulation and hydraulic pulse durability (Second Revision) |
Methods of tests |
------ |
|
53 |
IS 11542 : Part 2 : 1985 |
Dimensions for tyre tube valve core chamber Part 2 Core chamber No. 2 (large bore) |
------ |
------ |
|
54 |
IS 11542 : Part 1 : 1985 |
Dimensions for tyre tube valve core chamber Part 1 Core chamber No. 1 (normal bore) |
------ |
------ |
|
55 |
IS 11554 : 1986 |
Methods of test for air - Land cargo pallet nets |
Methods of tests |
------ |
|
56 |
IS 11571 : 1986 |
Terms and definitions of dimensions of scooters |
------ |
------ |
|
57 |
IS 11680 : 1986 |
Specification for hexagonal slotted (Castellated) nuts (MJ Series) |
Product Specification |
------ |
|
58 |
IS 11685 : 1986 |
Bicycle Bottom Bracket Axle, R Type |
------ |
------ |
|
59 |
IS 11715 : 1986 |
Rolled Threads For Aerospace Fasteners |
Product Specification |
------ |
|
60 |
IS 11715 : PART 1 : 2011 |
Aerospace - Lead and runout threads: Part 1 rolled external threads (First Revision) |
Product Specification |
------ |
|
61 |
IS 11715 : PART 2 : 2012 |
Aerospace - Lead and runout threads: Part 2 internal threads (First Revision) |
Product Specification |
------ |
|
62 |
IS 11716 : 1986 |
Performance Evaluation Of Braking System Of Scooters And Motorcycles |
------ |
------ |
|
63 |
IS 11734 : 1986 |
Bicycle Bottom Bracket Adjustable Ball Cup (R Type) |
------ |
------ |
|
64 |
IS 11735 : 1986 |
Bicycle Bottom Bracket Fixed Ball Cup (R Type) |
------ |
------ |
|
65 |
IS 11736 : 1986 |
Bicycle Bottom Bracket Lock Ring (R-Type) |
------ |
------ |
|
66 |
IS 11739 : 1986 |
Method of recording dust ingress in automotive vehicles |
Methods of tests |
------ |
|
67 |
IS 11825 : 1986 |
Method of weighment of automotive vehicles |
Methods of tests |
------ |
|
68 |
IS 11825 : 2023 |
Automotive Vehicles � Method of Weighment (First Revision) |
------ |
------ |
|
69 |
IS 11839 : 1986 |
Procedure for splash proof testing of automotive vehicles |
Methods of tests |
------ |
|
70 |
IS 11849 : 1986 |
Method of determination of centre of gravity of automotive vehicles |
Methods of tests |
------ |
|
71 |
IS 11850 : 1998 |
Automotive vehicles - Odometer systems - Method of evaluation (First Revision) |
Methods of tests |
------ |
|
72 |
IS 11851 : 1986 |
Method of evaluation of acceleration of automotive vehicle |
Others |
------ |
|
73 |
IS 11852 : Part 4 : 2001 |
Automotive Vehicles - Brakes and Braking Systems - Part 4 Compressed Air and Air Assisted Brakes - Special Requirements |
Others |
------ |
|
74 |
IS 11852 : 2013 |
Automotive Vehicles - Uniform Provisions Concerning the Approval of Vehicles of Categories M, N and T with Regard to Braking |
Product Specification |
------ |
|
75 |
IS 11852 : Part 9 : 2003 |
Automotive Vehicles - Brakes and Braking Systems - Part 9 : Requirements for Vehicles Equipped with Anti-Lock Braking Systems |
Code of Practice |
------ |
|
76 |
IS 11852 : Part 6 : 2001 |
Automotive Vehicles - Brakes And Braking Systems : Part 6 Vacuum Braking System - Special Requirements |
Others |
------ |
|
77 |
IS 11852 : Part 3 : 2001 |
Automotive vehicles - brakes and braking systems : Part 3 Performance requirements and evaluation |
Methods of tests |
------ |
|
78 |
IS 11852 : Part 2 : 2001 |
Automotive Vehicles - Brakes and Braking Systems - Part 2 : General Functions and Features |
Others |
------ |
|
79 |
IS 11852 : Part 8 : 2001 |
Automotive Vehicles - Brakes and Braking Systems - Part 8 : Test Procedures |
Methods of tests |
------ |
|
80 |
IS 11852 : Part 5 : 2001 |
Automotive Vehicles - Brakes And Braking Systems : Part 5 Compressed Air And Air Assisted Brakes - Pressure Test Connections |
Methods of tests |
------ |
|
81 |
IS 11852 : Part 1 : 2001 |
Automotive Vehicles - Brakes And Braking Systems : Part 1 Terminology |
Terminology |
------ |
|
82 |
IS 11852 : Part 7 : 2001 |
Automotive Vehicles - Brakes and Braking Systems - Part 7 : Inertia Dynamometer Test Method for Brake Lining |
------ |
------ |
|
83 |
IS 11887 : 1986 |
Cores for Aircraft Tyre Tube Valves |
------ |
------ |
|
84 |
IS 11903 : 1986 |
Specification for caps for aircraft tyre tube valves |
Product Specification |
------ |
|
85 |
IS 11981 : 1987 |
Recommendation for SafetyRequirements for Reflecting Surfaces of Automotive Vehicles |
------ |
------ |
|
86 |
IS 11982 : 1987 |
Design Rating and Safe Working Load for General Purpose Flat Pallet for Through Transit of Goods |
------ |
------ |
|
87 |
IS 11983 : 1987 |
Guidelines for marking of general purpose flat pallets for through transit of goods |
Code of Practice |
------ |
|
88 |
IS 12022 : 1987 |
Methods of Testing of Quality Characteristics for Piston Rings |
------ |
------ |
|
89 |
IS 12055 : 1987 |
Method of Measurement of Acceleration of Mopeds |
------ |
------ |
|
90 |
IS 12151 : 1987 |
Motorcycles Tyres, Diagonal Ply |
------ |
------ |
|
91 |
IS 12205 : 1988 |
Bicycle Hub Assembly - PH Type |
Product Specification |
------ |
|
92 |
IS 12264 : 1987 |
Signaling Mirror for Lifeboats and Liferafts for Sea-going Ships |
Product Specification |
------ |
|
93 |
IS 12266 : 1987 |
international shore connection for use on board ship |
Code of Practice |
------ |
|
94 |
IS 12358 : 1988 |
Specification for `Contact' Type Coupling for Vacuum and Pressure Systems Connection Between Tractor and Trailer |
Product Specification |
------ |
|
95 |
IS 12441 : Part 1 : 1995 |
Automotive Vehicles - Pneumatic Tyres - Part 1 : Passenger Car Tyres - Radial Ply |
------ |
------ |
|
96 |
IS 12545 : 1988 |
Methodology of calculating aircraft cargo volumes |
Code of Practice |
------ |
|
97 |
IS 12678 : 1989 |
Aerospace - Ground equipment - Graphical symbols for operators |
Terminology |
------ |
|
98 |
IS 12726 : 2018 |
Industrial trucks - Order - Picking trucks with operator position elevating above 1200 mm - Verification of stability (First Revision) |
Methods of tests |
------ |
|
99 |
IS 12750 : 1989 |
Automotive vehicles - Motorcycles and mopeds - Light alloy wheels methods of test and performance requirements |
Methods of tests |
------ |
|
100 |
IS 1281 : 2014 |
Bicycles - Cranks and chain wheels - Specification (Third Revision) |
Product Specification |
------ |
|
101 |
IS 12831 : 1989 |
Automotive vehicles - Braking systems - Banjo bolt connections dimensions |
Dimensions |
------ |
|
102 |
IS 12851 : 1989 |
Automotive vehicles - Hydraulic brake systems tubings - Performance requirements |
Product Specification |
------ |
|
103 |
IS 12863 : 1989 |
Symbols for the pictorial standardization of aircraft cargo K handling systems for unit load devices (ULDs) |
Others |
------ |
|
104 |
IS 12969 : 1990 |
Internal Combustion Engines - Methods of Test for Quality Characteristics of Valves |
Methods of tests |
------ |
|
105 |
IS 12971 : 1990 |
Road vehicles - Commercial vehicles clearance envelope for power take - Offs (PTO) |
Product Specification |
------ |
|
106 |
IS 12993 : 1991 |
Inland vessels - Hand-holes s |
------ |
------ |
|
107 |
IS 13098 : 2012 |
Automotive vehicles - Tubes for pneumatic tyres - Specification (First Revision) |
Product Specification |
------ |
|
108 |
IS 13121 : 1991 |
Shipbuilding - Over all evaluation of vibration in ships - Guidelines |
------ |
------ |
|
109 |
IS 13153 : 1991 |
Aerospace plain hexagon nuts (MJ Series) strength classification 1100 mpa maximum operating temperature 235°C - Specification |
Product Specification |
------ |
|
110 |
IS 13196 : 1991 |
Automotive vehicles - Light alloy wheels for motorcycles - Specification |
Product Specification |
------ |
|
111 |
IS 13207 : 1991 |
Automotive vehicles - Hydraulic braking systems - Wheel cylinder performance requirements |
Others |
------ |
|
112 |
IS 13225 : 1992 |
Automotive vehicles - hydraulic braking systems - Rubber cups - Specification |
Product Specification |
------ |
|
113 |
IS 13283 : 1991 |
Aerospace - Self - Locking, hexagon nuts (MJ Series) - Strength classification 1100 mpa - Maximum operating temperature 425 degree c specification |
Product Specification |
------ |
|
114 |
IS 13288 : Part 6 : 1992 |
Series 1 freight containers and testing Part 6 Platform based containers, open sided, with complete superstructure |
------ |
------ |
|
115 |
IS 13288 : Part 1 : 1993 |
Series 1 freight containers - Specification and testing: Part 1 general cargo containers for general purposes |
Product Specification |
------ |
|
116 |
IS 13288 : Part 3 : 2002 |
Series 1 freight containers - Specification and testing: Part 3 tank containers for liquids, gases and pressurized dry bulk (First Revision) |
Methods of tests |
------ |
|
117 |
IS 13290 : 1992 |
Shipbuilding - Measurement and reporting of shipboard vibration data - Code of practice |
------ |
------ |
|
118 |
IS 13302 : 2003 |
Rough Terrain Fork-Lift Trucks - Stability Test |
Product Specification |
------ |
|
119 |
IS 13437 : 2012 |
Road vehicles - Working voltages for lights fitted to motor vehicles and to their trailers (First Revision) |
Others |
------ |
|
120 |
IS 13444 : 1992 |
Animal drawn vehicles - Pneumatic tyres - Specification |
Product Specification |
------ |
|
121 |
IS 13493 : 1992 |
Automotive vehicles - Two wheelers - Method of evalation of brake lever strength requirements |
------ |
------ |
|
122 |
IS 13494 : 1992 |
Automotive Vehicles - Air Brake Systems - Performance Requirements for Unloader Valves |
------ |
------ |
|
123 |
IS 13507 : 1992 |
Automotive Vehicles - Self Centering - Method of Test |
------ |
------ |
|
124 |
IS 13530 : 1992 |
Automotive tyres - Retreading materials - Mould cure - General requirements |
------ |
------ |
|
125 |
IS 13532 : 1992 |
Automotive Tyres - Cushion Compound for Retreading - Mould Cure |
------ |
------ |
|
126 |
IS 13546 : 1992 |
General purpose flat pallets for through transit of goods performance requirements |
Others |
------ |
|
127 |
IS 13632 : 2014 |
Ships and marine technology - Marine gyro - Compasses (Second Revision) |
Product Specification |
------ |
|
128 |
IS 13633 : 1993 |
Shipbuilding - Measurement and reporting of local vibration data of ships, structures and equipment - Code of practice |
------ |
------ |
|
129 |
IS 13670 : 1992 |
Automotive vehicles - three wheelers - brake performance requirements |
------ |
------ |
|
130 |
IS 13698 : Part 2 : 1993 |
Freight containers - Information related to containers on board vessels Part 2 Telex data transmission |
Others |
------ |
|
131 |
IS 13708 : 2004 |
Shipbuilding and Marine Technology - Marine Radar Reflectors |
Product Specification |
------ |
|
132 |
IS 13714 : 1993 |
Dunnage pallets - Warehousing - Specification |
Product Specification |
------ |
|
133 |
IS 13750 : 1993 |
Automotive vehicle - Reference volume - Luggage compartment of passenger cars - Method of measurement |
------ |
------ |
|
134 |
IS 13835 : 1993 |
Aircraft - Connectors for ground electrical supplies-design, performance and test requirements |
Others |
------ |
|
135 |
IS 13894 : 1994 |
Automotive Vehicles - Identification Numbering Systems - Recommendations |
------ |
------ |
|
136 |
IS 13915 : 1994 |
Shipbuilding - Ships' steel weathertight doors |
------ |
------ |
|
137 |
IS 13932 : 1994 |
Aircraft - Electrical cables - Identification marking |
Others |
------ |
|
138 |
IS 13942 : 1994 |
Automotive vehicles - External projections - Performance requirements |
Others |
------ |
|
139 |
IS 13944 : 1994 |
Automotive vehicles - Window retention and release systems for buses - Safety requirements |
Safety Standard |
------ |
|
140 |
IS 14121 : 1995 |
Automotive vehicles - braking systems - test procedure for two and three wheelers |
------ |
------ |
|
141 |
IS 14247 : 1995 |
Automotive vehicles - Exterior protection for passenger car performance requirements |
Product Specification |
------ |
|
142 |
IS 14269 : 1995 |
Automotive vehicles - Integral power steering gear - Method of test |
Methods of tests |
------ |
|
143 |
IS 14283 : 1995 |
Automotive vehicles - Accelerator control systems - Safety requirements |
Safety Standard |
------ |
|
144 |
IS 14312 : 1996 |
Packaging - Packaging of TV Picture Tubes/computer Monitor Tubes - Code of Practice |
Code of Practice |
------ |
|
145 |
IS 14389 : 1996 |
Aircraft - Pallet dolley - Functional requirements |
Product Specification |
------ |
|
146 |
IS 14413 : 1996 |
Automotive vehicles - Telltale symbols and controls on two-Wheeled and three-wheeled vehicles |
Others |
------ |
|
147 |
IS 14495 : 1998 |
Automotive vehicles - Pillion hand - Holds for two - Wheeled vehicles - Requirements |
Product Specification |
------ |
|
148 |
IS 14511 : 1998 |
Automotive Vehicles - Testing of fuel Injectors - Hand Lever Testing Apparatus |
Methods of tests |
------ |
|
149 |
IS 14546 : 2009 |
Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (First Revision) |
Methods of tests |
------ |
|
150 |
IS 14555 : 1998 |
Automotive Vehicles - Evaporative Emissions from Vehicles Equipped with Spark Ignition Engines - Method of Measurement |
------ |
------ |
|
151 |
IS 14556 : 1998 |
Automotive Vehicles - Catalytic Converters for Spark Ignition Engines - Installed Requirements |
------ |
------ |
|
152 |
IS 14557 : 1998 |
Automotive vehicles - Cooling performance - Method of measurement |
Methods of tests |
------ |
|
153 |
IS 14607 : 1998 |
Shipbuilding - Pipework - Information transfer - Guidelines |
Product Specification |
------ |
|
154 |
IS 14608 : 1999 |
Shipbuilding - Ventilation and air-treatment of galleys and pantries with cooking applinces |
------ |
------ |
|
155 |
IS 14623 : 1998 |
Inland Vessels - Mushroom-type Ventilator Heads |
------ |
------ |
|
156 |
IS 14681 : 1999 |
Automotive vehicles - Fuel tanks for two or three wheelers |
Product Specification |
------ |
|
157 |
IS 14738 : Part 5 : 1999 |
Flexible intermediate bulk containers (Fibcs): Part 5 test methods - UV resistance test |
Methods of tests |
------ |
|
158 |
IS 14738 : Part 2 : 1999 |
Flexible intermediate bulk - Containers (Fibcs): Part 2 specifications, requirements, certification and marking |
Others |
------ |
|
159 |
IS 14738 : Part 4 : 1999 |
Flexible intermediate bulk containers (Fibcs): Part 4 test methods - Compression/stacking test |
Methods of tests |
------ |
|
160 |
IS 14738 : Part 1 : 1999 |
Flexible intermediate bulk containers (Fibcs): Part 1 definitions related to flexible intermediate bulk containers |
Terminology |
------ |
|
161 |
IS 14738 : Part 6 : 2000 |
Flexible intermediate bulk containers: Part 6 regulations on selection and use of flBcs |
Others |
------ |
|
162 |
IS 14738 : Part 3 : 1999 |
Flexible intermediate bulk containers (Fibcs): Part 3 test methods - Cyclic top lift test |
Methods of tests |
------ |
|
163 |
IS 14777 : 2000 |
Trucks and Bus Tyres - Methods Measuring Rolling Resistance |
------ |
------ |
|
164 |
IS 14785 : 2000 |
Automotive vehicles - - Determination of road - Load constants by coast down test method |
Methods of tests |
------ |
|
165 |
IS 14812 : 2005 |
Automotive vehicles - Rear underrun protective device - General requirements (First Revision) |
Safety Standard |
------ |
|
166 |
IS/ISO 14960 : Part 2 : 2014 |
Tubeless tyres - Valves and components: Part 2 clamp - In tubeless tyre valve - Test method |
Methods of tests |
------ |
|
167 |
IS 15192 : 2002 |
Aerospace - Nuts - Tolerances of form and position |
Product Specification |
------ |
|
168 |
IS 15266 : 2003 |
Shipbuilding and Marine Structures - Heated Glass Panes for Ships' Rectangular Windows |
Product Specification |
------ |
|
169 |
IS 15408 : 2014 |
Packaging - Bar code and two - Dimensional symbols for shipping, transport and receiving labels (First Revision) |
Dimensions |
------ |
|
170 |
IS 15437 : 2003 |
Aerospace - Screws, 100° normal countersunk head, internal offset cruciform ribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 mpa - Dimensions |
Product Specification |
------ |
|
171 |
IS 15469 : 2012 |
Aerospace - Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 mpa - Dimensions (First Revision) |
Product Specification |
------ |
|
172 |
IS 15533 : 2018 |
Cycles - Safety requirements for bicycles for young children (First Revision) |
Product Specification |
------ |
|
173 |
IS 15611 : Part 1 : 2018 |
Industrial trucks - Single - Side - Loading trucks - Verification of stability (First Revision) |
Methods of tests |
------ |
|
174 |
IS 15627 : 2005 |
Automotive vehicles - Pneumatic tyres i?or two and three - Wheeled motor vehicles - Specification |
Product Specification |
------ |
|
175 |
IS 15633 : 2005 |
Automotive vehicles - Pneumatic tyres for passenger car vehicles - Diagonal and radial ply - Specification |
Product Specification |
------ |
|
176 |
IS 15636 : 2012 |
Automotive vehicles - Pneumatic tyres for commercial vehicles - Diagonal and radial ply - Specification (First Revision) |
Product Specification |
------ |
|
177 |
IS 15653 : 2006 |
Reciprocating internal combustion engines - Vocabulary - Terms for engine maintenance |
Terminology |
------ |
|
178 |
IS 15710 : 2006 |
Road vehicles - Compressed natural gas (CNG) fuel system components - General requirements and definitions |
Terminology |
------ |
|
179 |
IS 15711 : 2006 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Performance and general test methods |
Methods of tests |
------ |
|
180 |
IS 15712 : 2006 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Automatic valve (Solenoid Valve) |
Methods of tests |
------ |
|
181 |
IS 15713 : 2006 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Pressure regulator |
Product Specification |
------ |
|
182 |
IS 15714 : 2006 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Gas/air mixer |
Product Specification |
------ |
|
183 |
IS 15715 : 2008 |
ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG)/LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEM COMPONENTS - CONDUIT (VENTILATION HOSE) |
Methods of tests |
------ |
|
184 |
IS 15716 : 2006 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Cng high pressure fuel line (Rigid) with end connections [having pressure exceeding 2.15 mpa (21.5 Bar)] |
Methods of tests |
------ |
|
185 |
IS 15717 : 2006 |
ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG)/ LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEM COMPONENTS - PETROL VALVE (AUTOMATIC/MANUAL) |
Product Specification |
------ |
|
186 |
IS 15718 : 2006 |
Road vehicles - Compressed natural gas (CNG) fuel system components - Cng high pressure fuel line (Flexible Hose) with end connections [having service pressure exceeding 2.15 mpa (21.5 Bar)] |
Product Specification |
------ |
|
187 |
IS 15719 : 2006 |
ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG)/LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEM COMPONENTS - ELECTRICAL WIRING KIT |
Others |
------ |
|
188 |
IS 15720 : 2008 |
ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) AND LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEM COMPONENTS - COMPART |
Others |
------ |
|
189 |
IS 15721 : 2006 |
ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) AND LIQUEFIED PETROLEUM GAS (LPG) - FIRE RETARDANT MATERIAL FOR SEAT, UPHOLSTERY, ROOF AND SIDE LINING |
Others |
------ |
|
190 |
IS 15722 : 2006 |
ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - CNG FLEXIBLE FUEL LINE WITH END CONNECTIONS [CNG FUEL LINE HAVING PRESSURE NOT EXCEEDING 2.15 MPa (21.5 BAR)] |
Others |
------ |
|
191 |
IS 15723 : 2006 |
ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) AND LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEM COMPONENTS - CURRENT LIMITING DEVICES |
Methods of tests |
------ |
|
192 |
IS 15876 : 2009 |
Ships and marine technology - Manholes with bolted covers |
Product Specification |
------ |
|
193 |
IS 15886 : 2010 |
Road Vehicles — Battery Operated--Vehicles — Code Of Practice |
Code of Practice |
------ |
|
194 |
IS 1600 : 1960 |
Code For Type Testing Of Constant Speed Internal Combustion Engines For General Purpose |
------ |
------ |
|
195 |
IS 1601 : 1960 |
Performance of constant speed internal combustion engines for general purposes |
------ |
------ |
|
196 |
IS 1602 : 1960 |
Code for type testing of variable speed internal combustion engines for automotive purposes |
------ |
------ |
|
197 |
IS 1603 : 1960 |
Performance of variable-speed internal combustion engines for automotive purpose |
------ |
------ |
|
198 |
IS 16058 : 2013 |
Dunnage pallets made from recycled plastic wastes for warehousing applications - Specification |
Product Specification |
------ |
|
199 |
IS 16137 : Part 2 : 2014 |
Automotive vehicles - Methods of measurement of braking coefficient of road surfaces |
Methods of tests |
------ |
|
200 |
IS 16332 : 2017 |
Automotive vehicles - Strength of superstructure of large passenger vehicles |
Product Specification |
------ |
|
201 |
IS/ISO 16495 : 2013 |
Packaging Transport packaging for dangerous goods Test methods |
Code of Practice |
------ |
|
202 |
IS 16833 : 2018 |
AUTOMOTIVE TRACKING DEVICE (ATD) AND INTEGRATED SYSTEMS |
Others |
------ |
|
203 |
IS 16961 : 2018 |
Packaging - Vocabulary |
Terminology |
------ |
|
204 |
IS 17132 : 2019 |
Guideline Specifications for Replacement Brake Lining Assemblies and Drum Brake Linings for Power-Driven Vehicles and Their Trailers |
Product Specification |
------ |
|
205 |
IS 17427 : 2020 |
Wooden ( Timber ) Pallets for Packaging, Storage and Transportation - Specification |
Product Specification |
------ |
|
206 |
IS 17458 : 2018 |
Reciprocating internal combustion engine - Fire protection |
Others |
------ |
|
207 |
IS 17469 : 2020 |
Small Craft - Principal Data |
Others |
------ |
|
208 |
IS 17470 : 2020 |
Small Craft - Fire Protection |
Safety Standard |
------ |
|
209 |
IS 17471 : 2020 |
Small Craft - Permanently Installed Petrol and Diesel Fuel Tanks |
Product Specification |
------ |
|
210 |
IS 17884 : Part 1 : 2022 |
Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m |
Dimensions |
------ |
|
211 |
IS 17884 : Part 3 : 2022 |
Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m |
Product Specification |
------ |
|
212 |
IS 17884 : Part 2 : 2022 |
Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m |
Others |
------ |
|
213 |
IS 2415 : 2004 |
Cycles - Rubber Tubes |
Service Specification |
------ |
|
214 |
IS 2553 : Part 2 : 1992 |
Safety Glass - Part 2 : For Road Transport |
Product Specification |
------ |
|
215 |
IS 2577 : Part 6 : 2012 |
Road vehicles - Fuse - Links: Part 6 single - Bolt fuse - Links (Second Revision) |
Product Specification |
------ |
|
216 |
IS 2577 : 1974 |
Cartridge Fuse-links for Automobiles |
Product Specification |
------ |
|
217 |
IS 2577 : Part 7 : 2012 |
Road vehicles - Fuse - Links: Part 7 fuse - Links with tabs (Type G) with rated voltage of 450 V (Second Revision) |
Product Specification |
------ |
|
218 |
IS 2646 : 1986 |
Generator (Dynamos) for Automobiles |
------ |
------ |
|
219 |
IS 2728 : 1964 |
Memorandum on Screw Threads for Bicycle Components |
------ |
------ |
|
220 |
IS 3028 : Part 3 : 2018 |
Automotive vehicles - Noise emitted by moving vehicles - Specification and method of measurement: Part 3 L 5 category |
Methods of tests |
------ |
|
221 |
IS 3045 : 1965 |
Marking of hatenway beams |
------ |
------ |
|
222 |
IS 3046 : 1965 |
Marking of wooden hatenway covers |
------ |
------ |
|
223 |
IS 3105 : 1980 |
General requirements for automobile lighting and signalling devices |
------ |
------ |
|
224 |
IS 3267 : 1981 |
General Requirements Of Anchors |
------ |
------ |
|
225 |
IS 3268 : 1981 |
Stockless Anchors (for Ships's Use) |
------ |
------ |
|
226 |
IS 3269 : 1981 |
Stock Anchor (for Ship's use) |
------ |
------ |
|
227 |
IS 3270 : 1966 |
Stock and Single Fluke Stock Anchors (For Harbour Use) |
------ |
------ |
|
228 |
IS 3279 : 1966 |
General requirements for mushroom ventiliators |
Others |
------ |
|
229 |
IS 3280 : 1966 |
Dimensions for mushroom ventilators with adjustable head - Welded type |
Dimensions |
------ |
|
230 |
IS 3281 : 1966 |
Dimensions for mushroom ventilators with fixed head - Welded type |
Dimensions |
------ |
|
231 |
IS 3282 : 1966 |
Dimensions for mushroom ventilators with adjustable head - Cast iron type |
Dimensions |
------ |
|
232 |
IS 3283 : 1966 |
Dimensions for mushroom ventilators with adjustable head - Cast iron type with provision for passage of light |
Dimensions |
------ |
|
233 |
IS 3381 : 1965 |
Cast Vertical Bollards with and Without Lugs |
------ |
------ |
|
234 |
IS 3404 : 1979 |
Ladies Bicycle Frames |
------ |
------ |
|
235 |
IS 3511 : 1966 |
Cylinder bore diameters for internal combustion engines |
------ |
------ |
|
236 |
IS 3563 : 1993 |
Automotive vehicles - Headlights (replaceable lamp type) |
------ |
------ |
|
237 |
IS 3628 : 1966 |
Sidelights, tail-lights, parking lights, stop lights and direction indicators for automobile use |
------ |
------ |
|
238 |
IS 3798 : 1966 |
Glossary of terms used in the bicycle industry |
------ |
------ |
|
239 |
IS 3940 : 1989 |
Ships'- Exhaust ventilators - Specification (first revision) |
Product Specification |
------ |
|
240 |
IS 3941 : 1966 |
Specification for cabin ventilators |
Product Specification |
------ |
|
241 |
IS 3942 : 1966 |
Specification for marine sounding rods |
Product Specification |
------ |
|
242 |
IS 3943 : 1966 |
Voice Pipe and Voice Pipe Fittings |
------ |
------ |
|
243 |
IS 4045 : 2006 |
Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class a (Second Revision) |
Product Specification |
------ |
|
244 |
IS 4061 : 1967 |
Specification for headlight switches for automobiles |
Product Specification |
------ |
|
245 |
IS 4062 : 1986 |
Specification for foot - Operated head - Light dip switches for automobiles (First Revision) |
Product Specification |
------ |
|
246 |
IS 4259 : 1967 |
Code of practice for erection and calibration of direction - Finders (Medium Frequency) for marine use |
Code of Practice |
------ |
|
247 |
IS 4337 : 1967 |
Shipbuilding - goose-neck and derrick heel fittings for light load derricks |
------ |
------ |
|
248 |
IS 4370 : 1967 |
Code of practice for the use of lighting and signalling devices on cars and commercial vehicles |
------ |
------ |
|
249 |
IS 4383 : 1983 |
Specification for pilot and embarkation ladders (First Revision) |
Product Specification |
------ |
|
250 |
IS 4384 : 1967 |
Steel Watertight and Weathertight Doors |
------ |
------ |
|
251 |
IS 4551 : 1968 |
Specification for lifeboat crutches |
Product Specification |
------ |
|
252 |
IS 4562 : 1997 |
Shipbuilding - Portable Chemical Fire Extinguishers, Foam Type for Marine Use |
------ |
------ |
|
253 |
IS 4916 : 1968 |
Methods of test for bicycle saddles |
------ |
------ |
|
254 |
IS 5040 : 1969 |
General requirements for forklift trucks |
------ |
------ |
|
255 |
IS 5079 : 1969 |
Rubber Valve-tubing for Cycle Tube Valves |
------ |
------ |
|
256 |
IS 5113 : 2012 |
Shipbuilding - Mooring winches (Second Revision) |
Product Specification |
------ |
|
257 |
IS 5220 : 1969 |
Specification for forged horn cleats |
Product Specification |
------ |
|
258 |
IS 5326 : 2007 |
Life - Buoys - Specification (First Revision) |
Product Specification |
------ |
|
259 |
IS 5474 : Part 1 to 5 : 1989 |
Shipbuidling - Round windows (side scuttles) |
Product Specification |
------ |
|
260 |
IS 5971 : 2011 |
Shipbuilding - Strum boxes (First Revision) |
Product Specification |
------ |
|
261 |
IS 5977 : 1981 |
Regulators for Automobile dc Generators (Dynamos) |
------ |
------ |
|
262 |
IS 6143 : 1971 |
Specification for sheaves used with ships blocks |
Product Specification |
------ |
|
263 |
IS 6144 : 1971 |
Axle Pins Used with Ship's Blocks |
------ |
------ |
|
264 |
IS 6145 : 1971 |
Locking Plate for Axle Pin Used With Ship's Blocks |
------ |
------ |
|
265 |
IS 6146 : 1971 |
Beckets Used With Ship's Blocks |
------ |
------ |
|
266 |
IS 6147 : 1971 |
Supporting Straps Used with Ship's Blocks |
------ |
------ |
|
267 |
IS 6203 : 1971 |
Specification For Ship's Round Eye Plates |
Product Specification |
------ |
|
268 |
IS 6219 : 1989 |
Methods of test for general purpose flat pallets for through transit of goods (Second Revision) |
Methods of tests |
------ |
|
269 |
IS 6225 : 1971 |
Ship's Oval Eye Plates |
Product Specification |
------ |
|
270 |
IS 624 : 2003 |
Bicycles - Rims - Specification (Fourth Revision) |
Product Specification |
------ |
|
271 |
IS 625 : 2006 |
Bicycle - Handle bars - Specification (Third Revision) |
Product Specification |
------ |
|
272 |
IS 627 : 1961 |
Bicycle Chains (revised) |
------ |
------ |
|
273 |
IS 628 : 1993 |
Bicycles - pedal assembly - specification (Second Revision) |
Product Specification |
------ |
|
274 |
IS 629 : 2013 |
Bicycles — Hub Assembly — Specification (Fourth Revision) |
Product Specification |
------ |
|
275 |
IS/ISO 6621 : PART 2 : 2003 |
Internal combustion engines - Piston rings: Part 2 inspection measuring principles |
Code of Practice |
------ |
|
276 |
IS/ISO 6722 : 2011 |
Road vehicles – 60 V and 600 Single – Core Cables – Dimensions, Test Methods and Requirements |
Product Specification |
------ |
|
277 |
IS 6724 : 1972 |
Specification for aircraft sealing wire |
Product Specification |
------ |
|
278 |
IS 6737 : 1972 |
Conventional signs for use on general arrangement and detail plans of ships |
Others |
------ |
|
279 |
IS/ISO 6742 : PART 2 : 2015 |
Cycles - Lighting and retro - Reflective devices: Part 2 retro - Reflective devices (First Revision) |
Product Specification |
------ |
|
280 |
IS 6764 : 1972 |
Colour code for identification of aircraft mechanical control circuits |
------ |
------ |
|
281 |
IS 6765 : 1980 |
Powered Industrial Truck - Parameters for Designation for Rated Capacity and Capacity - Part 1 : Powered High Lift Trucks |
------ |
------ |
|
282 |
IS 6927 : Part 1 : 1973 |
ISO series 1 platform freight containers: Part 1 General requirements |
------ |
------ |
|
283 |
IS 6927 : Part 2 : 1973 |
ISO series 1 platform freight containers Part 2 Testing |
------ |
------ |
|
284 |
IS 6929 : Part 1 : 1985 |
ISO series 1 general cargo freight containers for general purposes: Part 1 General requirements |
------ |
------ |
|
285 |
IS 6929 : Part 2 : 1985 |
ISO series 1 general cargo freight containers for general purposes: Part 2 Testing |
------ |
------ |
|
286 |
IS 7028 : Part 9 : 1987 |
Performance tests for complete, flLled transport packages: Part 9 stacking wzx using compression tester (First Revision) |
Methods of tests |
------ |
|
287 |
IS 7037 : Part 2 : 1973 |
ISO series 1 tank containers for liquids and gases: Part 2 Testing |
------ |
------ |
|
288 |
IS 7037 : Part 1 : 1973 |
ISO series 1 tank containers for liquids and gases: Part 1 General requirements |
------ |
------ |
|
289 |
IS 7065 : 1973 |
Specification for steering wheels |
Product Specification |
------ |
|
290 |
IS 7073 : 1973 |
Glossary of terms relating to air cargo pallets and containers |
Terminology |
------ |
|
291 |
IS 7195 : Part 3 : 1974 |
Domestic freight containers: Part 3 Handling and maintenance |
------ |
------ |
|
292 |
IS 7195 : Part 2 : 1975 |
Domestic freight containers: Part 2 Corner fittings |
------ |
------ |
|
293 |
IS 7195 : Part 1 : 1974 |
Domestic freight containers: Part 1 Dimensions and ratings |
------ |
------ |
|
294 |
IS 7248 : 1973 |
Cargo gear particulars book |
------ |
------ |
|
295 |
IS 7263 : 1973 |
Directions of operation of toggle switches on aircraft |
Code of Practice |
------ |
|
296 |
IS 7264 : 1974 |
Dimensions for aircraft pressure refuelling connection |
Dimensions |
------ |
|
297 |
IS 7269 : 1974 |
Numbering of aircraft engines, engine cylinders, combustion chambers and direction of rotation of engines and propellers |
------ |
------ |
|
298 |
IS 7274 : 1973 |
Referencing system of aircraft zones, access doors and panels |
------ |
------ |
|
299 |
IS 7276 : 1989 |
Non - Expendable general purpose flat pallets for through transit of goods - Specification (Second Revision) |
Dimensions |
------ |
|
300 |
IS 7341 : Part 2 : 1974 |
ISO series 1 folding containers and platform base containers: Part 2 Tests |
------ |
------ |
|
301 |
IS 7341 : Part 1 : 1974 |
ISO series 1 folding containers and platform base containers: Part 1 General requirements |
------ |
------ |
|
302 |
IS 7451 : Part 5 : 1974 |
Reciprocating Internal Combustion Engines - Part V : Designation of the Cylinders |
------ |
------ |
|
303 |
IS 7451 : Part 4 : 1974 |
Reciprocating Internal Combustion Engines - Part IV : Designation of Direction of Rotation |
------ |
------ |
|
304 |
IS 7451 : Part 3 : 1974 |
Reciprocating Internal Combustion Engines - Part III : Definition of Right-Hand and Left-Hand Single Bank Engines |
------ |
------ |
|
305 |
IS 7471 : 1974 |
Recommendation for Polarity of Earth Connections and Marking of Electrical Equipment for Automobiles (First Revision) |
Product Specification |
------ |
|
306 |
IS 7496 : 1974 |
Specification for direction of travel - Controls for industrial tractors and powered industrial trucks |
Others |
------ |
|
307 |
IS 7528 : 1974 |
Porcelain (Moulded) Fuse-Links for Automobiles |
------ |
------ |
|
308 |
IS 7552 : 2018 |
Industrial trucks - Verification of stability - Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated (Second Revision) |
Methods of tests |
------ |
|
309 |
IS 7570 : 1975 |
Glossary of terms relating to fork arms and attachments of fork lift trucks |
Terminology |
------ |
|
310 |
IS 7595 : Part 2 : 1976 |
General requirements for otter boards: Part 2 rectangular horizontally curved otter boards |
Others |
------ |
|
311 |
IS 7595 : Part 4 : 1986 |
General requirements for otter boards: Part 4 application standard |
Others |
------ |
|
312 |
IS 7595 : Part 1 : 1975 |
General requirements for otter boards: Part 1 flat rectangular otter boards |
Others |
------ |
|
313 |
IS 7595 : Part 6 : 1991 |
Fishing vessels - Otter boards: Part 6 guidelines for selection |
Others |
------ |
|
314 |
IS 7595 : Part 3 : 1977 |
General requirements for otter boards: Part 3 oval otter boards |
Others |
------ |
|
315 |
IS 7595 : Part 5 : 1991 |
Fishing vessels - Otter boards: Part 5 vee type otter boards |
Others |
------ |
|
316 |
IS 7617 : 1984 |
Code of practice for maintenance of forks for forklift trucks |
------ |
------ |
|
317 |
IS 7622 : 2001 |
Series 1 freight containers - Handling and securing (Second Revision) |
Safety Standard |
------ |
|
318 |
IS 7631 : 2018 |
Industrial trucks - Pallet stackers, double stackers and order - Picking trucks with operator position elevating up to and including 1200 mm lift height - Verification of stability (Second Revision) |
Methods of tests |
------ |
|
319 |
IS 7657 : Part 2 : 1975 |
Specification for starter ring gears for internal combustion engines: Part 2 gears for axial and coaxial starters |
Product Specification |
------ |
|
320 |
IS 7694 : 1992 |
Series 1 freight containers - Corner fittings - Specification (Second Revision) |
Product Specification |
------ |
|
321 |
IS 7699 : 1975 |
Reflex Reflectors for Cycles |
------ |
------ |
|
322 |
IS 7830 : 1975 |
Dimensions of aircraft sheet rails and pins (Requirements covered in IS 11165:1985) |
------ |
------ |
|
323 |
IS 7854 : 1975 |
Voltages and frequency for aircraft electrical systems |
------ |
------ |
|
324 |
IS 7856 : 1975 |
Safety features for ground power units for direct current aircraft servicing and engine starting |
Safety Standard |
------ |
|
325 |
IS 7857 : 1975 |
Specification for aircraft - Fuel nozzle grounding plugs and sockets |
Product Specification |
------ |
|
326 |
IS 7862 : 1975 |
Glossary of terms relating to safety aspects concerning operating areas of industrial trucks |
Terminology |
------ |
|
327 |
IS 7879 : Part 8 : 1987 |
Glossary of aeronautical and astronautical terms: Part 8 power plant |
Terminology |
------ |
|
328 |
IS 7879 : Part 2 : 1975 |
Glossary of aeronautical terms: Part 2 motion of aircraft |
Terminology |
------ |
|
329 |
IS 7879 : Part 3 : 1975 |
Glossary of aeronautical and astronautical terms: Part 3 structure |
Terminology |
------ |
|
330 |
IS 7879 : Part 7 : 1984 |
Glossary of astronautical and astronautical terms: Part 7 air traffic and ground services |
Terminology |
------ |
|
331 |
IS 7879 : Part 1 : 1975 |
Glossary of aeronautical and astronautical terms: Part 1 general |
Terminology |
------ |
|
332 |
IS 7879 : Part 6 : 1978 |
Glossary of aeronautical and astronautical terms: Part 6 space terms |
Terminology |
------ |
|
333 |
IS 7879 : Part 4 : 1980 |
Glossary of aeronautical and astronautical terms: Part 4 aerodynamics |
Terminology |
------ |
|
334 |
IS 7879 : Part 5 : 1982 |
Glossary of aeronautical and astronautical terms: Part 4 aerodynes (Heavier - Than - Air - Aircraft) |
Terminology |
------ |
|
335 |
IS 7906 : Part 3 : 1975 |
Helical compression springs: Part 3 data sheet for specifications for springs made from circular section wire and bar |
Dimensions |
------ |
|
336 |
IS 8005 : 1976 |
Classification of unit loads |
Others |
------ |
|
337 |
IS 8007 : 2004 |
Road vehicles - Mechanical coupling between tractors and seml - Trailers - Interchangeability (First Revision) |
Product Specification |
------ |
|
338 |
IS 8150 : 1997 |
Shipbuilding - 45 Litre Capacity Chemical Foam Type Fire Engine, for Marine Use |
Product Specification |
------ |
|
339 |
IS 8169 : 1997 |
Air cargo equipment - Base - Restrained certified containers exclusively for the lower deck of high - Capacity air - Craft (First Revision) |
Product Specification |
------ |
|
340 |
IS 8178 : Part 1 : 1976 |
Series 1 thermal containers: Part 1 General requirements |
------ |
------ |
|
341 |
IS/ISO 8178 : Part 1 : 2017 |
Reciprocating internal combustion engines - Exhaust emission measurement: Part 1 test bed measurement systems of gaseous and particulate emissions |
Methods of tests |
------ |
|
342 |
IS/ISO 8178 : Part 9 : 2018 |
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement Part 9 Test Cycles and Test Procedures for Test Bed Measurement of Exhaust Gas Smoke Emissions from Compression lgnition Engines Operating under Transient Conditions |
Methods of tests |
------ |
|
343 |
IS/ISO 8178 : PART 4 : 2017 |
Reciprocating Internal Combustion Engines — Exhaust Emission Measurement Part 4 Steady-state and Transient Test Cycles for Different Engine Applications ( First Revision ) |
Methods of tests |
------ |
|
344 |
IS 8178 : Part 2 : 1976 |
Series 1 thermal containers: Part 2 Testing |
------ |
------ |
|
345 |
IS/ISO 8178 : Part 3 : 1994 |
Reciprocating internal combustion engines - Exhaust emission measurement: Part 3 definitions and methods of measurement of exhaust gas smoke under steady - State conditions |
Methods of tests |
------ |
|
346 |
IS 8215 : 1976 |
Glossary of Terms for Ships' Propellers |
Terminology |
------ |
|
347 |
IS 8274 : 1976 |
Specification for drawbar eyes and forecarriage pins for connection between trailers of gross mass above 5 tonnes and upto 35 tonnes and transport tractor |
Product Specification |
------ |
|
348 |
IS 8297 : 1976 |
Specification for towing jaw for use between trailers of up to 16 tonnes gross mass and transport tractor |
Product Specification |
------ |
|
349 |
IS 8410 : 1977 |
Rim For Mopeds |
------ |
------ |
|
350 |
IS 8415 : 1977 |
Mounting dimensions of head lights for automobiles |
------ |
------ |
|
351 |
IS 8416 : 1977 |
Mounting Dimensions of Fog Lights for Automobiles |
------ |
------ |
|
352 |
IS 8422 : Part 9 : 1986 |
Piston rings for lC engines : Part 9 Terms and Definitions |
Terminology |
------ |
|
353 |
IS/ISO 8528 : Part 3 : 2005 |
Reciprocating internal combustion engine driven alternating current generating sets: Part 3 alternating current generators for generating sets |
Others |
------ |
|
354 |
IS/ISO 8528 : Part 2 : 2005 |
Reciprocating internal combustion engine driven alternating current generating sets: Part 2 engines |
Product Specification |
------ |
|
355 |
IS/ISO 8528 : Part 5 : 2018 |
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 5 Generating Sets ( First Revision ) |
Product Specification |
------ |
|
356 |
IS/ISO 8528 : PART 12 : 1997 |
Reciprocating internal combustion engine driven alternating current generating sets: Part 12 emergency power supply to safety services |
Product Specification |
------ |
|
357 |
IS 8575 : Part 1 : 1977 |
Series 1 freight containers, platform based open-sided with complete superstructure: Part 1 General requirements |
------ |
------ |
|
358 |
IS 8575 : Part 2 : 1977 |
Series 1 freight containers, platform based open-sided with complete superstructure: Part 2 Testing |
------ |
------ |
|
359 |
IS 8638 : 2006 |
Shipbuilding - Class A magnetic compasses, azimuth reading devices and binnacles - Tests and certifications |
Product Specification |
------ |
|
360 |
IS 8638 : Part 1 to 3 : 1989 |
Shipbuilding - Class A magnetic compasses, binnacles and azimuth reading devices - Code for testing and certification |
------ |
------ |
|
361 |
IS 8650 : PART 1 TO 5 : 1989 |
Shipbuilding - Deck Machinery - Glossary of Terms and Graphical Symbols |
Safety Standard |
------ |
|
362 |
IS 8790 : Part 1 : 1978 |
General requirements of powered industrial trucks working in hazardous areas: Part 1 internal combustion engine powered trucks |
Product Specification |
------ |
|
363 |
IS 8819 : Part 1 : 1978 |
Hold loading steel dumb barges, Part 1 Capacity and dimensions |
------ |
------ |
|
364 |
IS 8820 : Part 1 : 1978 |
Specification for towing hooks: Part 1 scale of tractive efforts |
Others |
------ |
|
365 |
IS 8821 : Part 2 : 1982 |
Steering Gear - Part II : Hand Hydraulic Steering Gear |
Others |
------ |
|
366 |
IS 8821 : Part 1 : 1978 |
Steering Gear - Part I : Values of Torques |
Others |
------ |
|
367 |
IS 8821 : Part 3 : 1990 |
Inland vessels - steering gear Part 3 Method of shop testing |
Methods of tests |
------ |
|
368 |
IS 8848 : 1978 |
Rope Tubs |
------ |
------ |
|
369 |
IS 8886 : Part 14 : 1980 |
Ships' Ordinary Rectangular Windows - Part XIV : Details of Frame, Non-opening, Light Type Welded Windows |
Others |
------ |
|
370 |
IS 8886 : Part 10 : 1980 |
Ships' Ordinary Rectangular Windows - Part X : Details of Frame, Inward opening, Top Himge Heavy and light type welded windows |
Others |
------ |
|
371 |
IS 8886 : Part 19 : 1980 |
Ships' Ordinary Rectangular Windows - Part XIX : Details of Glass Holder, Outward Opening Side Hinged, Heavy and Light Type Bolted and Welded Windows |
Others |
------ |
|
372 |
IS 8886 : Part 16 : 1980 |
Ships' Ordinary Rectangular Windows - Part XVI : Details of Frame, Outward Opening, Side Hinged, Light Type Bolted Windows |
Others |
------ |
|
373 |
IS 8886 : Part 7 : 1980 |
Ships' Ordinary Rectangular Windows - Part VII : Details of Frame, Inward Opening, Side Hinged, Heavy and Light Type Welded Windows |
Others |
------ |
|
374 |
IS 8886 : Part 4 : 1980 |
Ships' Ordinary Rectangular Windows - Part IV : Details of Position of Lugs for Hinges and Swing Bolts and Securing Holes on the Frame |
Others |
------ |
|
375 |
IS 8886 : Part 12 : 1980 |
Ships' Ordinary Rectangular Windows - Part XII : Details of Frame, Non-opening, Light Type Bolted Windows |
Others |
------ |
|
376 |
IS 8886 : Part 20 : 1980 |
Ships' Ordinary Rectangular Windows - Part XX : Details of Glass Holder, Top Hinged, Heavy and Light Type Bolted and Welded Windows |
Others |
------ |
|
377 |
IS 8886 : Part 9 : 1980 |
Ships' Ordinary Rectangular Windows - Part IX : Details of Frame, Inward Opening, Top Hinged and Light Type Welded Windows |
Others |
------ |
|
378 |
IS 8886 : Part 18 : 1980 |
Ships' Ordinary Rectangular Windows - Part XVIII : Details of Glass Holder, Inward Opening Side Hinged, Heavy and Light Type Bolted and Welded Windows |
Others |
------ |
|
379 |
IS 8886 : Part 6 : 1980 |
Ships' Ordinary Rectangular Windows - Part VI : Details of Frame, Inward Opening, Side Hinged, Light Type Bolted Windows |
Others |
------ |
|
380 |
IS 8886 : Part 15 : 1980 |
Ships' Ordinary Rectangular Windows - Part XV : Details of Frame, Outward Opening, Side Hinged, Heavy Type Bolted Windows |
Others |
------ |
|
381 |
IS 8886 : Part 22 : 1980 |
Ships' ordinary rectangular windows, Part 22 Details of swing bolts and wing nuts |
Others |
------ |
|
382 |
IS 8886 : Part 11 : 1980 |
Ships' Ordinary Rectangular Windows - Part XI : Details of Frame, Non-opening, Heavy Type, Bolted Windows |
Others |
------ |
|
383 |
IS 8886 : Part 2 : 1978 |
Ship's Ordinary Rectangular Windows - Part II : General Requirements |
Others |
------ |
|
384 |
IS 8886 : Part 8 : 1980 |
Ships' Ordinary Rectangular Windows - Part 8 : Details of Frame, Inward Opening, Top Hinged, Heavy Type Bolted Windows |
Others |
------ |
|
385 |
IS 8886 : Part 17 : 1980 |
Ships' Ordinary Rectangular Windows - Part XVII : Details of Frame, Outward Opening, Side Hinged, Heavy Type Welded Windows |
Others |
------ |
|
386 |
IS 8886 : Part 5 : 1980 |
Ships' Ordinary Rectangular Windows - Part V : Details of Frame, Inward Opening, Side Hinged, Heavy Type Bolted Windows |
Others |
------ |
|
387 |
IS 8886 : Part 13 : 1980 |
ships ordinary rectangular windows : Part 13 Details of frame, non-opening heavy type, Welded Windows |
Others |
------ |
|
388 |
IS 8886 : Part 21 : 1980 |
Ship's Ordinary Rectangular Windows - Part XXI : Details of Hinge Pin |
Others |
------ |
|
389 |
IS 8903 : 1978 |
Specification for drawbars for trailers of up to 5 tonnes gross mass |
Product Specification |
------ |
|
390 |
IS 8950 : 1993 |
Inland vessels - Harbour tugs - General reuirements |
Product Specification |
------ |
|
391 |
IS 8980 : 1978 |
Specification for general purpose push - Pull single - Pole circuit - Breakers for aircraft |
Product Specification |
------ |
|
392 |
IS 8994 : 2004 |
Shipbuilding and marine structures - Deck machinery - Accommodation ladder winches (First Revision) |
Product Specification |
------ |
|
393 |
IS 9075 : 1979 |
Stability tests for side loader trucks |
Methods of tests |
------ |
|
394 |
IS 9081 : 2017 |
Automotive vehicles - Valves and valve accessories for pneumatic tyres - Specification (Fifth Revision) |
Product Specification |
------ |
|
395 |
IS 9099 : Part 2 : 1980 |
Performance testing of powered industrial trucks working in hazardous areas: Part 2 electric battery powered industrial trucks |
Others |
------ |
|
396 |
IS 9099 : Part 1 : 1979 |
Performance testing of powered industrial trucks working in hazardous areas: Part 1 - Internal combustion engine powered |
Others |
------ |
|
397 |
IS 9141 : 1979 |
Code of practice for the packing of fasteners |
------ |
------ |
|
398 |
IS 9212 : 1979 |
Recommendations for Pressures in Brakes Lines of Road Vehicles and Braking efficiency |
------ |
------ |
|
399 |
IS 9226 : 1979 |
Recommendations for load distribution for passenger cars |
------ |
------ |
|
400 |
IS 9237 : 1979 |
Symbols for Controls, Indicators and Tell-Tales for Road Vehicles |
------ |
------ |
|
401 |
IS 9268 : 1979 |
Braking terminology for road vehicles |
------ |
------ |
|
402 |
IS 9273 : Part 1 : 1979 |
Series 1 box type dry bulk containers (non-pressurized): Part 1 General requirements |
------ |
------ |
|
403 |
IS 9273 : Part 2 : 1979 |
Series 1 box type dry bulk containers (non-pressurized): Part 2 Testing |
------ |
------ |
|
404 |
IS 9340 : 1993 |
Expendable pallets - Specification (First Revision) |
Product Specification |
------ |
|
405 |
IS 9384 : 1979 |
Consolidated Data Plate for Freight Containers |
Product Specification |
------ |
|
406 |
IS 9438 : 1980 |
Performance requirements and methods of tests for wheels/rims for trucks |
Code of Practice |
------ |
|
407 |
IS 9449 : Part 3 : 1985 |
Dimensions for Tyre Valve Threads - Part 3 Threads, 10V1, 15V1, 17V1 and 20V1 |
------ |
------ |
|
408 |
IS 9449 : Part 2 : 1985 |
Dimensions for Tyre Valve Threads - Part 2 : Threads 9V1, 1OV2 and 12V1 |
------ |
------ |
|
409 |
IS 9449 : Part 1 : 1980 |
Dimensions for Tyre Valve Threads - Part I : Threads 5V1, 5V2, 6V1 and 8 V1 |
------ |
------ |
|
410 |
IS 9464 : 1980 |
Specification for horizontal centrifugal pumps for marine use |
Product Specification |
------ |
|
411 |
IS 9496 : Part 1 : 1980 |
Specification for fishing floats: Part 1 aluminium alloy and glass floats |
Product Specification |
------ |
|
412 |
IS 9655 : 1994 |
Automotive vehicles - Type, location and functions of controls - Mopeds |
------ |
------ |
|
413 |
IS 9714 : 1993 |
Automotive vehicles - symbols for controls, indicators and telltales for mopeds |
------ |
------ |
|
414 |
IS 9726 : 1984 |
Terms and definitions of weights of mopeds |
------ |
------ |
|
415 |
IS 9727 : 1981 |
Terms and definitions of dimensions for mopeds |
------ |
------ |
|
416 |
IS 9733 : 2015 |
Packaging - Complete, filled transport packages - General rules for the compilation of performance test schedules (First Revision) |
Others |
------ |
|
417 |
IS 9733 : PART 1 : 1981 |
Guidelines for the compilation of performance tests schedules of complete, filled transport packages: Part 1 General principles |
Terminology |
------ |
|
418 |
IS 9733 : Part 2 : 1989 |
Guidelines for the compilation of performance tests schedules of complete, filled transport packages: Part 2 Quantitative data |
Terminology |
------ |
|
419 |
IS 9760 : 1981 |
DIMENSIONS FOR COUPLING ARRANGEMENTS BETWEEN TOWING VEHICLE AND TRAILER |
Dimensions |
------ |
|
420 |
IS 9961 : 1981 |
Reversing Lights for Automobiles |
------ |
------ |
|
421 |
IS 9966 : 2006 |
Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class b (First Revision) |
Product Specification |
------ |
