|
1 |
IS 10141 : 2001 |
Positive List of Constituents of Polyethylene in Contact with Foodstuffs, Pharmaceuticals and Drinking Water |
Others |
SUPERSEDED BY IS 16738 |
|
2 |
IS 10148 : 1982 |
Positive list of constituents of polyvinyl chloride (Pvc) and its copolymers in contact with foodstuffs, pharmaceuticals and drinking water |
Safety Standard |
IS 10148:2023 |
|
3 |
IS 10909 : 2001 |
Positive List of Constituents of Polypropylene and its Copolymers in Contact with Foodstuffs, Pharaceuticals and Drinking Water |
Others |
SUPERSEDED BY IS 16738 |
|
4 |
IS 11310 : 1985 |
Babul Gum |
------ |
------ |
|
5 |
IS 11435 : 1985 |
Positive list of constituents of ionomer resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water |
Others |
IS 11435 : 2024 |
|
6 |
IS 11705 : 1986 |
PositlVe list of constituents of ethylene/acrylic acid (Eaa) copolymers for their safe use in contact with foodstuffs, pharmaceuticals and drinking water |
Others |
IS 11705 : 2024 |
|
7 |
IS 11856 : 1986 |
Adhesive Caulking Compound, Bitumen Based |
------ |
------ |
|
8 |
IS 12229 : 1987 |
Positive list of constituents of polyalkylene terephthalates (PET & PBT) for their safe use in contact with foodstuffs, pharmaceuticals and drinking water |
Others |
IS 12252 : 2017 |
|
9 |
IS 12247 : 1988 |
Specification for nylon-6 polymer for its safe use in contact with foodstuffs pharmaceuticals and drinking water |
Product Specification |
12247 : 2024 |
|
10 |
IS 13360 : Part 8 : Sec 2 : 2004 |
Plastics - Methods of Testing - Part 8 : Permanence/Chemical Properties - Section 2 : Polymer Dispersions and Rubber Latices - Determination of Ph |
Methods of tests |
------ |
|
11 |
IS 13360 : Part 8 : Sec 10 : 1999 |
Plastics - Methods of Testing - Part 8 : Permanence/Chemical Properties - Section 10 : Determination of Environmental Stress Cracking (ESC) - Ball or Pin Impression Method |
Methods of tests |
------ |
|
12 |
IS 13360 : Part 9 : Sec 4 : 1997 |
Plastics - Methods of Testing Part 9 Optical properties Sec 4 Qualitative evaluation of the bleeding of colorants |
Methods of tests |
------ |
|
13 |
IS 13463 : 1992 |
Polyamide(Nylon 6) materials for moulding and extrusion specification |
Product Specification |
------ |
|
14 |
IS 14534 : 2016 |
Plastics - Guidelines for the recovery and recycling of plastics waste (First Revision) |
Others |
IS 14534:2023 |
|
15 |
IS 1461 : 1984 |
Specification for plastic buttons (thermosetting) (Second Revision) |
Product Specification |
1461 : 2024 |
|
16 |
IS 14611 : 2016 |
Multilayered cross laminated sheets/tarpaulins/covers/agricultural films - Specification (First Revision) |
Product Specification |
14611 : 2024 |
|
17 |
IS 14611 : 1998 |
Multilayered cross laminated sheets and tarpaulins/covers |
Code of Practice |
------ |
|
18 |
IS 14635 : 1999 |
Polytetrafluoroethylene (Ptfe) materials for moulding and extrusion - Specification |
Product Specification |
IS 14635 (Part 1) : 2020 IS 14635 (Part 2) : 2020 |
|
19 |
IS 14995 : 2001 |
Stretch cling films - Specification |
Product Specification |
14995 : 2024 |
|
20 |
IS 16460 : 2016 |
Plastics - Film and sheeting - Biaxially oriented polypropylene (Pp) films |
Product Specification |
IS 16460 : 2023/ISO 17555 : 2021 |
|
21 |
IS 16630 : Part 2 : 2017 |
Plastics — Post-Consumer Poly(Ethylene Terephthalate) (PET) Bottle Recyclates Part 2 Preparation of Test Specimens and Determination of Properties |
Methods of tests |
16630 (part 2) : 2024 |
|
22 |
IS 17077 : Part 1 : 2019 |
Plastics - AcrylonitrileButadienestyrene (Abs) moulding and extrusion materials: Part 1 designation system and basis for specifications |
Product Specification |
IS 17077 (PART 1) : 2022 |
|
23 |
IS/ISO 17088 : 2012 |
Specifications for compostable plastics (First Revision) |
Product Specification |
IS/ISO 17088 : 2021 |
|
24 |
IS 17397 : Part 1 : 2020 |
Plastics — Thermoplastic Polyurethanes for Moulding and Extrusion Part 1 Designation System and Basis for Specifications |
Product Specification |
IS 17397 (PAR 1) : 2022 |
|
25 |
IS 17899 T : 2022 |
Assessment of biodegradability of plastics in varied conditions |
Safety Standard |
IS 17899 T : 2024 |
|
26 |
IS 2038 : 1962 |
Fabric base thermosetting synthetic resin bonded laminated sheets |
------ |
IS 2036 |
|
27 |
IS 2213 : 1962 |
Methods of sampling of thermosetting moulding materials |
------ |
------ |
|
28 |
IS 2267 : 1995 |
Polystyrene moulding and extrusion materials - Specification (Second Revision) |
Product Specification |
IS 2267 (PART 2) : 2024 |
|
29 |
IS 2267 : Part 2 : 2024 |
Polystyrene (ps) moulding and extrusion materials : Part 2 preparation of test specimens and determination of properties (Third Revision) |
------ |
------ |
|
30 |
IS 2508 : 2016 |
Polyethylene films and sheets - Specification (Third Revision) |
Product Specification |
2508 : 2024 |
|
31 |
IS 2508 : 1984 |
Low Density Polyethylene Films |
Product Specification |
------ |
|
32 |
IS 2880 : 1986 |
Pressure sensitive adhesive cellulose tapes |
------ |
IS 13262 |
|
33 |
IS 3371 : 1980 |
Di-n-butyl Phthalate |
------ |
IS 14421 |
|
34 |
IS 3395 : 1997 |
Low density polyethylene (Ldpe) and linear low density polyethylene (Lldpe) materials for moulding and extrusion - Specification (Second Revision) |
Product Specification |
is 7328 : 2020 |
|
35 |
IS 3465 : 1966 |
Jointing Compound For Use In Lpg Appliances And Installations |
------ |
------ |
|
36 |
IS 3672 : 1980 |
Di-Octyl phthalate plasticizer |
------ |
------ |
|
37 |
IS 3676 : 1986 |
Pressure sensitive adhesive PVC tapes |
------ |
IS 13262 |
|
38 |
IS 425 : 1953 |
Shellac adhesive for steam flange joints |
------ |
------ |
|
39 |
IS 5025 : 1985 |
Gum Karaya |
------ |
------ |
|
40 |
IS 6307 : 1985 |
Specification for rigid pvc sheets (First Revision) |
Product Specification |
IS 6307 : 2023 |
|
41 |
IS 6627 : 1980 |
Dimethyl phthalate plasticizer |
------ |
------ |
|
42 |
IS 7277 : 1974 |
Code of practice for safe use of polyethylene in contact with foodstuffs, pharmaceutical and drinking water |
------ |
IS 10141, IS 10146 |
|
43 |
IS 7288 : 1974 |
Code of practice for safe use of polyvinyl chloride (PVC) and its copolymers in contact with foodstuffs, pharmaceuticals and drinking water |
------ |
------ |
|
44 |
IS 7961 : 1976 |
Code of practice for safe use of styrene polymers in contact with foodstuffs, pharmaceuticals and drinking water |
------ |
IS 10142, IS 10149 |
|
45 |
IS 8230 : 1976 |
Steel Filled Epoxy Resin Based Adhesives |
------ |
------ |
|
46 |
IS 8543 : Part 3 : Sec 2 : 1978 |
Methods of Testing Plastics - Part III : Preparation of Test Specimens - Section 2 : Injection Moulded Test Specimens |
------ |
IS 13360 : Part 2 : Sec 3/ISO 294-1 : 1996 |
|
47 |
IS 8543 : Part 4 : Sec 1 : 1984 |
Methods of testing plastics Part 4 Short term mechanical properties Section 1 Determination of tensile properties |
------ |
IS 13360 : Part 5 : Sec 2&3/ISO 527-2&3 : 1995 |
|
48 |
IS 9572 : 1980 |
Benzyl Butyl Phthalate Plasticizer |
------ |
IS 14421 |
|
49 |
IS 9849 : 1981 |
Guide for selection of toys for different age groups of children |
------ |
------ |
|
50 |
IS 9873 : PART 1 : 2012 |
Safety Requirements for Toys - Part 1 : Safety Aspects related to Mechanical and Physical Properties |
Methods of tests |
------ |
|
51 |
IS 9873 : PART 2 : 2012 |
Safety Of Toys Part 2 Flammability |
Methods of tests |
------ |
|
52 |
IS 9873 : PART 3 : 1999 |
Safety Requirements for Toys - Part 3 : Migration of Certain Elements |
Dimensions |
------ |
|
53 |
IS 9873 : Part 3 : 2017 |
Safety of toys: Part 3 migration of certain elements (Second Revision) |
Methods of tests |
|
|
54 |
IS 9873 : Part 6 : 2017 |
Safety of Toys Part 6 Determination of Certain Pthalate Esters in Toys and Children's Products |
Methods of tests |
------ |
