a) Formulation of standards for terminology, acceptance tests layout of boilers and other aspects not covered under the Indian Boilers Regulations.
b) Preparation of code for Unfired Pressure Vessels
c) Co-ordination of work with ISO/TC 11 Boilers and Pressure Vessels.
ISO TC- 11 (P): Boilers and Pressure Vessels ; TC-11 (P): ;
a) Formulation of standards for refrigeration and air- conditioning equipment and appliances
including terminology, definitions and symbols, designation of refrigerants, testing of
refrigerating systems; refrigerating units.
b) Co-ordination of work with ISO/TC 86. TC 142 Refrigeration and Air conditioning; IEC/TC 61 Safety of household appliances for refrigeration and air- conditioning and IEC TC 59/SC 59M Performance of Electrical Household and Similar Cooling and Freezing Appliances.
ISO TC- 0 SC- 0 (O): Refrigeration & Air-Conditioning ; ISO TC- 1 SC- 1 (P): Safety of Refrigeration Systems ; ISO TC- 4 SC- 4 (P): Testing and rating of Refrigerant Compressors ; ISO TC- 6 SC- 6 (P): Testing and rating of Air-Conditioners and Heat Pump ; ISO TC- 7 SC- 7 (O): Testing and rating of Commercial Refrigerated Display Cabinets ; ISO TC- 8 SC- 8 (O): Refrigerants and Refrigeration Lubricants ; IEC TC- 59M SC- 59M (P): Performance of Electrical Household and Similar Cooling and Freezing Appliances ; IEC TC- 61C SC- 61C (P): Safety of Refrigeration Appliances for Household and Commercial Use. ; IEC TC- 61 D SC- 61 D (P): Appliances for Air-conditioning for Household and Similar Purposes. ; ISO TC- 0 SC- 0 (O): Cleaning Equipment for air and other gases ; ISO TC-86 (P): Refrigeration & Air-Conditioning ; ISO TC-86 SC-1 (P): Safety and environmental requirements for refrigerating systems ; ISO TC-86 SC-4 (P): Testing and rating of refrigerant compressors ; ISO TC-86 SC-6 (P): Testing and rating of air-conditioners and heat pumps ; ISO TC-86 SC-7 (P): Testing and rating of commercial refrigerated display cabinets ; ISO TC-86 SC-8 (P): Refrigerants and refrigeration lubricants ; ISO TC-142 (P): Cleaning equipment for air and other gases ; TC-142 (P): Cleaning equipment for air and other gases ; TC-86 (P): Refrigeration and air-conditioning ; TC-86 SC-1 (P): Safety and environmental requirements for refrigerating systems ; TC-86 SC-4 (P): Testing and rating of refrigerant compressors ; TC-86 SC-6 (P): Testing and rating of air-conditioners and heat pumps ; TC-86 SC-7 (P): Testing and rating of commercial refrigerated display cabinets ; TC-86 SC-8 (P): Refrigerants and refrigeration lubricants ; IEC TC-59 SC-59M (P): Performance of electrical household and similar cooling and freezing appliances
; IEC TC-61 SC-61C (P): Safety of refrigeration appliances for household and commercial use
; IEC TC-61 SC-61D (P): Appliances for air-conditioning for household and similar purposes
;
3
MED 4
Renewable Energy Sources
ANKITA VIDHYARTHI (SCIENTIST-D)
0
Formulation of standards in the field of Renewable energy sources such as solar energy, bio-gas energy, bio-mass energy etc.
ISO TC- 180 (P): SOLAR ENERGY ; ISO TC-180 SC-1 (P): Climate - Measurement and data ; ISO TC-180 SC-4 (P): Systems - Thermal performance, reliability and durability ; ISO TC-285 (P): Clean cookstoves and clean cooking solutions ; TC-180 (P): Solar energy ; TC-180 SC-1 (P): Climate - Measurement and data ; TC-180 SC-4 (P): Systems - Thermal performance, reliability and durability ; TC-285 (P): Clean cookstoves and clean cooking solutions ;
4
MED 6
Continuous Bulk Conveying, Elevating, Hoisting Aerial Ropeways And Related Equipment
AMAN DHANAWAT (SCIENTIST-C)
0
a) Formulation of standards for conveyors, vertical hoists, bucket elevators, aerial ropeways Amusement/joy rides and related equipment like crushers screens, vibrating mills etc. and conveyors for personal transportation.
b) Co-ordination of work with ISO/TC 101 Continuous Mechanical Handling Equipment.
c) Co-ordination of work with ISO/TC 254 Safety of Amusement Rides and Amusement Devices.
ISO TC- (O): Continuous Mechanical Handling Equipment ; ISO TC- (P): Safety of Amusement Rides and Amusement Devices ; TC-101 (O): Continuous mechanical handling equipment ; TC-254 (P): Safety of amusement rides and amusement devices ;
5
MED 7
Earth Moving Equipment and Material Handling
SHUBHAM YADAV (SCIENTIST-C)
0
1) Formulation of standards for terminology, general design and construction, classification, ratings, leading dimensions, safety code of operation and maintenance and testing and inspection methods of mechanical, pneumatic and hydraulic bulk handling systems and equipment for loose bulk material including fluid material and unit loads (other than those covered by Conveyors, Vertical Hoists and Bucket Elevators Sectional Committee, MED 6) such as:
a)Unloading equipment such as wagon tipplers, wagon marshalling equipment, wagon unloading equipment and ship un-loaders
b)Stacking and loading equipment such as stackers, reclaimers, ship, wagon and truck loaders
c)Hydraulic conveying equipment such as coal and ash conveying equipment
d)Pneumatic conveying equipment such as food grains, cement, fertilizer, ash and pulverized conveying equipment;
e)Batching and bagging equipment such as automatic bag filling machines and automatic weighing and bagging equipment
f)Earth-moving machinery and equipment.
g)Non-powered material handling equipment such as hand-trucks, platform trucks, Lifting tables, pallet trucks, stillage lifting trucks and all types of trolleys, wheel barrows
2) Co-ordination of work with ISO/TC 127 `Earth Moving, Machinery’ and ISO/TC 110 Industrial Trucks”.
ISO TC-TC 127 (P): EARTH-MOVING MACHINERY ; ISO TC-TC 127 SC-1 (P): Test methods relating to safety and machine performance ; ISO TC-TC 127 SC-2 (P): Safety, ergonomics and general requirements ; ISO TC-TC 127 SC-3 (P): Machine characteristics, electrical and electronic systems, operation and maintenance ; ISO TC-TC 127 SC-4 (P): Terminology, commercial nomenclature, classification and ratings ; TC-1 (P): Screw threads ; TC-110 (P): Industrial trucks ; TC-127 (P): Earth-moving machinery ; TC-127 SC-1 (P): Test methods relating to safety and machine performance ; TC-127 SC-2 (P): Safety, ergonomics and general requirements ; TC-127 SC-3 (P): Machine characteristics, electrical and electronic systems, operation and maintenance ; TC-127 SC-4 (P): Terminology, commercial nomenclature, classification and ratings ;
6
MED 8
Mining Techniques And Equipment
SHUBHAM TIWARI (SCIENTIST-C)
0
Formulation of Indian Standards relating to basic mining techniques and equipment.
a) Formulation of standards on wire ropes and standards for strands for different purposes; wire products, wire ropes and fittings.
b) Co-ordination of work with ISO/TC 82 Mining and ISO/TC 105 Wire ropes.
ISO TC-105 (O): Wire Ropes And Wire Products ; TC-105 (O): Steel wire ropes ;
Formulation of standards on gas cylinders for permanent, high pressure liquefiable low pressure liquefiable and dissolved gases; fittings of gas cylinder, namely valve fittings, pressure regulators; pipelines conveying gases; identification colours of gas cylinders; acetylene generators; filling ratios and developed pressures for different gases.
ISO TC- 58 (P): Gas cylinders ; ISO TC- 2 SC- 2 (P): Cylinder fittings ; ISO TC- 3 SC- 3 (P): Cylinder design ; ISO TC- 4 SC- 4 (P): Operational requirements for gas cylinders ; ISO TC- 185 (O): Safety devices for protection against excessive pressure ; ISO TC- 220 (O): Cryogenic vessels ; TC-185 (O): Safety devices for protection against excessive pressure ; TC-220 (O): Cryogenic vessels ; TC-4 (P): Rolling bearings ; TC-58 (P): Gas cylinders ; TC-58 SC-2 (P): Cylinder fittings ; TC-58 SC-3 (P): Cylinder design ; TC-58 SC-4 (P): Operational requirements for gas cylinders ; ISO TC-58 (P): Vocabulary ;
a) Formulation of standards for equipment including industrial valves used in chemical industry.
b)co-ordination of work with ISO/TC 112 Vacuum technology,ISO/TC 116 Space heating appliances and ISO/TC 153 Valves,
ISO TC- 1 & 2 SC- 1 & 2 (P): Chemical Engineering Plants And Related Equipment ; ISO TC-112 (O): Chemical Engineering Plants And Related Equipment ; ISO TC-112 (O): Vacuum technology; ; ISO TC-153 (P): Valves. ; ISO TC-TC (P): Plastic and Rubber Machines ; ISO TC-270 (P): Plastic and Rubber Machines ; ISO TC-112 (P): Vacuum technology ; TC-112 (P): Vacuum technology ; TC-153 (P): Valves ; TC-270 (P): Plastics and rubber machines ;
a)Formulation of standards for construction plant and machinery used in the field of civil engineering. b)Co-ordination of work with ISO/TC 195 `Building construction machinery and equipment.
ISO TC- 0 SC- 0 (P): Building Construction machinery and equipment - ; ISO TC- 1 SC- 1 (P): Machinery and equipment for concrete work ; ISO TC-195 (P): Building construction machinery and equipment ; ISO TC-195 SC-1 (P): Machinery and equipment for concrete work ; ISO TC-195 SC-2 (P): Road operation machinery and associated equipment ; ISO TC-195 SC-3 (P): Drilling and foundation machinery and equipment ; TC-195 (P): Building construction machinery and equipment ; TC-195 SC-1 (P): Machinery and equipment for concrete work ; TC-195 SC-2 (P): Road operation machinery and associated equipment ;
12
MED 20
Pumps
AMAN DHANAWAT (SCIENTIST-C)
0
a)Formulation of standards on components, equipment, methods of tests and code of
practices for different type of pumps, excluding handpumps.
b)Co-ordination of work with ISO/TC 115 Pumps.
ISO TC- (P): Pumps ; ISO TC- (P): Dimensions and Technical Specifications of Pump ; ISO TC- (O): Methods of Measurement and Testing ; ISO TC- (O): Installation and special application ; TC-115 (P): Pumps ; TC-115 SC-1 (P): Dimensions and technical specifications of pumps ; TC-115 SC-2 (P): Methods of measurement and testing ; TC-115 SC-3 (P): Installation and special application ;
13
MED 21
Diamond Core And Waterwell Drilling
SHUBHAM YADAV (SCIENTIST-C)
0
a) Formulation of standards for diamond core drilling equipment and water well drilling rigs including their accessories. It also includes codes of practice for drilling and boring operations.
b)Co-ordination of work with ISO/TC 82 Mining Through, ISO/TC 82/SC 5 - Rock drilling and SC 6 Diamond core drilling equipment.
ISO TC-82 SC-5 (O): Rock Drilling ; ISO TC-82 SC-6 (O): Diamond core drilling equipment ; TC-82 (P): Mining ;
14
MED 22
Turbo Machinery
LOKRAJ MEENA (SCIENTIST-C)
0
a)Formulation of standards for compressors, blowers, exhausters and their related
accessories. It also covers methods of measuring various quantities connected with the
testing and code of practices.
b)Preparation of technical supply conditions and acceptance tests for centrifugal, reciprocating, rotary and dynamic compressors, blowers and exhasters.
c)Co-ordination of work with ISO/TC 118 Compressors, Pneumatic Tools and Pneumatic machines.
ISO TC- 0 SC- 0 (P): Compressors and pneumatic tools, machines and equipment’ ; ISO TC-1 SC-1 (P): ‘Process Compressors’ ; ISO TC- 4 SC- 4 (P): Compressed air treatment technology ; ISO TC-118 (P): Compressors and pneumatic tools, machines and equipment ; ISO TC-118 SC-1 (P): Process compressors ; ISO TC-118 SC-4 (P): Compressed air treatment technology ; ISO TC-118 SC-6 (O): Air compressors and compressed air systems ; TC-118 (P): Compressors and pneumatic tools, machines and equipment ; TC-118 SC-1 (P): Process compressors ; TC-118 SC-4 (P): Compressed air treatment technology ; TC-118 SC-6 (P): Air compressors and compressed air systems ; IEC TC-5 (P): Steam turbines
; IEC TC-4 (P): Hydraulic turbines
; IEC TC-3 (P): Quantum technologies ; ISO TC-192 (P): Gas turbines ;
“Formulation of standards for safes, cash boxes, strong room doors and safe deposit locker cabinets, ventilation equipment etc. for banks including electrical & electromechanical systems like electronic lockers, remote sensing etc and ballistic security products.”
ISO TC-ISO/TC 332 (P): Sustainable Finance ; ISO TC-332 (P): Sustainable finance ; ISO TC-332 (P): Security equipment for financial institutions and commercial organizations ; ISO TC-332 (Secretariat): Security equipment for financial institutions and commercial organizations ; TC-332 (P): Security equipment for financial institutions and commercial organizations ;
17
MED 25
Printing Machinery
LOKRAJ MEENA (SCIENTIST-C)
0
Formulation of standards on printing machinery and components covering terminology,
dimensions, performance, maintenance and safety requirements
a) Formulation of standards on mechanical vibration and shock including:
i) Terminology
ii) Excitation by sources, such as machines, and vibration and shock testing devices;
iii) Elimination, reduction and control, especially by balancing, isolation and damping
iv) Measurement and human evaluation of shock and vibration exposure
v) Methods and means of measurement and calibration
vi) Methods of testing
b) Co-ordination of work with ISO/TC 108, Mechanical vibration and shock
ISO TC- 0 SC- 0 (P): Mechanical Vibration and Shock ; ISO TC- 2 SC- 2 (P): Measurement and Evaluation of Mechanical Vibration and Shock as applied to Machines, Vehicles and Structures ; ISO TC- 3 SC- 3 (P): Use and Calibration of Vibration and Shock Measuring Instrument ; ISO TC- 4 SC- 4 (P): Human Exposure to mechanical Vibration and Shock ; ISO TC- 5 SC- 5 (P): Condition Monitoring and Diagnostics of Machine ; ISO TC- 6 SC- 6 (P): Vibration and Shock Generating Systems ; TC-108 (P): Mechanical vibration, shock and condition monitoring ; TC-108 SC-2 (P): Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures ; TC-108 SC-4 (P): Human exposure to mechanical vibration and shock ; TC-108 SC-5 (P): Condition monitoring and diagnostics of machine systems ; TC-108 SC-6 (P): Vibration and shock generating systems ;
21
MED 29
Sewing Machines
SHUBHAM TIWARI (SCIENTIST-C)
0
a) Formulation of standards on sewing machines, sewing machine parts and accessories for
household and industrial purposes.
b)Co-ordination of work with ISO/TC 148 Sewing machines.
Formulation of standards for radial shaft seals, gaskets and packings made from asbestos,
cork, rubber, paper, rope, metal and combinations there of.
ISO TC- 7 SC- 7 (O): Sealing Devices ;
23
MED 32
Photographic Equipment
SHUBHAM TIWARI (SCIENTIST-C)
0
Formulation of standards on:
a) Terminology, material requirements, measurements, tests, calculations and performance for photographic equipment and accessories including cameras but excluding
chemicals, paper and film.
b) All types of equipment and accessories used in silent and sound motion picture projectors
(including still projectors), sound recording and reproduction including dimension cinematographic films.
Note 1 - The scope does not include components of cinematographic equipment which
are already explicitly covered by the scope of other committees, such as acoustics,
Recording, electric lamps, glassware.
Note 2 - Video recording equipment is excluded.
Note 3 - Formulation of standards on photographic materials is covered in inorganic
Chemical and photographic materials sectional committee, CHD 1.
Co-ordination of work with ISO/TC 42 Photography
and ISO/TC 36 Cinematography..
ISO TC- (O): Cinematography ; ISO TC- (O): Photography ; TC-36 (P): Cinematography ;
24
MED 33
Utensils, Cutlery And Domestic Hardware
LOKRAJ MEENA (SCIENTIST-C)
0
Formulation of standards in the field of utensils, cutlery and domestic hardware items.
ISO TC- 186 (O): Cutlery and table and decorative metal hollow-ware ; TC-186 (P): Cutlery and table and decorative metal hollow-ware ; TC-195 SC-3 (P): Drilling and foundation machinery and equipment ;
25
MED 37
METHODS AND EQUIPMENTS FOR UNDERGROUND COAL GASIFICATION AND COAL BED METHANE
AMAN DHANAWAT (SCIENTIST-C)
0
Formulation of standards in the field of underground coal gasification and coal bed methane
ISO TC-263 (P): METHODS AND EQUIPMENTS FOR UNDERGROUND COAL GASIFICATION AND COAL BED METHANE ; TC-263 (P): Coalbed methane (CBM) ;
26
MED 38
MECHANICAL EQUIPMENT USED IN REFUELING STATIONS FOR PETROLEUM AND GASEOUS FUEL
Formulation of standards in the field of Mechanical Equipment Used in Refueling Stations For Petroleum and Gaseous Fuel like dispensers/pumps , storage
tanks/cascades , compressors , tubing & pipes , valves etc
ISO TC-340 (P): Natural gas fuelling stations ; ISO TC- 67 (O): Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ; TC-340 (P): Natural gas fuelling stations ; TC-67 (O): Oil and gas industries including lower carbon energy ;
27
MED 39
Energy Management and Energy Savings Sectional Committee
Standardization in the field of energy management and energy savings, including for example: energy efficiency, energy performance, energy supply, procurement practices for energy using equipment and systems, and energy use as well as measurement of current energy consumption, implementation of a measurement system to document, report, and validate continual improvement in energy management and evaluation / determination of energy savings.
TC-301 (P): Energy management and energy savings ;
28
MED 40
Safety of Machinery
ANKITA VIDHYARTHI (SCIENTIST-D)
0
Standardization of basic concepts and general principles for Mechanical safety of manufacturing machinery incorporating terminology, methodology, guards and safety devices within the framework of IS/ISO/IEC Guide 51 ‘Safety aspects — Guidelines for their inclusion in standards’ and in cooperation with other sectional committee’s committees.
Except:
Product safety standards, as defined in IS/ISO/IEC Guide 51, and which are explicitly covered by the work of other ISO or IEC technical committees.
ISO TC-TC 199 (P): Safety of Machinery ; ISO TC-199 (P): Safety of Machinery ; TC-199 (P): Safety of machinery ;