| S. No. |
Doc. NO. | Document Title | Stage |
|---|---|---|---|
| 1 | PGD/01/27986 | Safety Information for the Content of Piping Systems and Tanks : Part 1 Piping Systems | WC-Draft |
| 2 | PGD/01/27987 | Safety Information for the Content of Piping Systems and Tanks Part 2: Tanks | WC-Draft |
| 3 | PGD/01/27988 | Graphical Symbols -- Safety Colours and Safety Signs -- Natural Disaster Safety way Guidance System | WC-Draft |
| 4 | PGD/01/27989 | Graphical symbols -- Safety Colours and Safety Signs Part 2: Measurement of Photopic Luminance of Phosphorescent Components used in a Natural Disaster Safety way Guidance System | WC-Draft |
| 5 | PGD/01/27992 | Public Information Guidance Systems Part 4: Installation and Assessment | WC-Draft |
| 6 | PGD/01/27993 | Graphical Symbols -- Safety Colours and Safety Signs -- Guidance for the Development and use of a Safety Signing System | WC-Draft |
| 7 | PGD/04/28047 | Tools for Pressing Part 1 Round Punches with 60 Degrees Conical Head and Straight Shank | WC-Draft |
| 8 | PGD/08/22047 | Hydraulic Impulse Tools Specification | WC-Draft |
| 9 | PGD/08/24773 | Hydraulic torque wrench -- Specification | WC-Draft |
| 10 | PGD/08/26053 | Rock drilling equipment -- Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels | Under Published |
| 11 | PGD/08/27267 | Shanks for Pneumatic Tools and Fitting Chuck Bushings -- Dimensions | WC-Draft |
| 12 | PGD/09/23642 | Bonded abrasive products -- Shape types, designation and marking | Finalization |
| 13 | PGD/09/23647 | Coated abrasives -- Determination and designation of grain size distribution Part 2 Macrogrit sizes P12 to P220 | Finalization |
| 14 | PGD/09/25720 | Coated Abrasives -- Abrasive belts -- Selection of width/length combination | Finalization |
| 15 | PGD/09/26556 | Bonded abrasive products -- Dimensions -- Part 15 Cutting-off wheels on stationary or mobile cutting-off machines | WC-Draft |
| 16 | PGD/09/27402 | Safety requirements for coated abrasive products | WC-Draft |
| 17 | PGD/09/27403 | Safety requirements for super abrasive products | WC-Draft |
| 18 | PGD/09/27950 | Bonded abrasive products -- Dimensions Part 8 Grinding wheels for deburring and fettling/snagging on stationary machine | WC-Draft |
| 19 | PGD/09/27951 | Bonded abrasive products -- Dimensions Part 9 Grinding wheels for high-pressure grinding | WC-Draft |
| 20 | PGD/09/27952 | Bonded abrasive products -- Dimensions Part 14 Grinding wheels for deburring and fettling/snagging on an angle grinder | WC-Draft |
| 21 | PGD/09/27953 | Bonded abrasive products -- Dimensions Part 16 Cutting-off wheels on hand held power tools | WC-Draft |
| 22 | PGD/13/23244 | Rolling Bearings Methods for calculating the modified reference rating life for universally loaded bearings (first Revision) | Finalization |
| 23 | PGD/13/25113 | Rolling Bearings Plummer Block Housings Boundary Dimensions fourth revision | P-Draft |
| 24 | PGD/13/25114 | Self - Aligning rtoller bearings: Part 1 Single row -- Specification (first revision) | WC-Draft |
| 25 | PGD/13/25116 | Specification for Double Row Radial Ball Bearings first revision | P-Draft |
| 26 | PGD/13/25118 | Rolling Bearings Cast and Pressed Housings for Insert Bearings Boundary Dimensions and Tolerances | WC-Draft |
| 27 | PGD/13/25119 | Specification for Double Row Cylindrical Roller Bearings first revision | P-Draft |
| 28 | PGD/13/25123 | Installation and Maintenance of Rolling Bearings Code of Practice first revision | WC-Draft |
| 29 | PGD/13/25210 | Self - Aligning roller bearings: Part 2 Double row -- Specification (first revision) | WC-Draft |
| 30 | PGD/13/25229 | Plain Bearings Terms Definitions Classification and Symbols Part 1 Design Bearing Materials and Their Properties Second Revision | WC-Draft |
| 31 | PGD/13/26113 | Rolling Bearings — Accessories Part 1 Adapter Sleeve Assemblies and Withdrawal Sleeves — Specification (First Revision) | WC-Draft |
| 32 | PGD/13/26114 | Rolling bearings -- Accessories: Part 2 Locknuts and locking devices -- Specification (first revision) | Under Published |
| 33 | PGD/13/26119 | Cages for needle roller bearings -- Specification (first revision) | Under Published |
| 34 | PGD/13/26126 | Specification for Tapered Roller Bearings First Revision | P-Draft |
| 35 | PGD/13/26185 | Identification Code for Shell Type Needle Bearings (First Revision) | WC-Draft |
| 36 | PGD/13/27055 | Rolling Bearings Part 1 Steel Balls Third revision | WC-Draft |
| 37 | PGD/13/27057 | Rolling Bearings Part 2 Ceramic Balls First Revision | WC-Draft |
| 38 | PGD/13/27671 | Reuse recycling and disposal of bearing materials | P-Draft |
| 39 | PGD/13/28064 | Rolling Bearings Taper Rolling Bearings Tapered Rollers Specification | WC-Draft |
| 40 | PGD/14/20543 | Synthetic Plastic Slide Fasteners Special Purpose Part 1 Specification Selection and Ordering Guideline of The Product | WC-Draft |
| 41 | PGD/14/20544 | Synthetic Plastic Slide Fasteners Special Purpose Part 2 Test and Measurement Methods | Under Published |
| 42 | PGD/14/20545 | Slide fasteners General Purpose | Finalization |
| 43 | PGD/14/25240 | Metallic Slide Fasteners (For Aviation Purpose) — Specification (first revision) | Under Published |
| 44 | PGD/14/27124 | Staples — Specifications (Second Revision) | WC-Draft |
| 45 | PGD/14/27688 | Stainless steel safety razor blades — Specifications | Project-Approval |
| 46 | PGD/14/27734 | Paper Cutter — Specification | P-Draft |
| 47 | PGD/15/27723 | Ergonomics of Human-System Interaction : Part 5 Workstation Layout and Postural Requirements ( First Revision ) | WC-Draft |
| 48 | PGD/18/24666 | Robotics safety requirements: Part 1 Industrial robots | Under Published |
| 49 | PGD/18/24668 | Robotics safety requirements: Part 2 Industrial robot applications and robot cells | Under Published |
| 50 | PGD/18/28337 | Robotics -- Tests methods for exoskeleton-type walking RACA robot | WC-Draft |
| 51 | PGD/18/28338 | Automation systems and integration -- Evaluating energy efficiency and other factors of manufacturing systems that influence the environment: Part 5 Environmental performance evaluation data | WC-Draft |
| 52 | PGD/18/28339 | Safety of machinery -- Integration of machinery into a system -- Basic requirements second revision | WC-Draft |
| 53 | PGD/18/28352 | Data quality: Part 115 Master Data -- Exchange of quality identifiers -- Syntactic semantic and resolution requirements first revision | WC-Draft |
| 54 | PGD/18/28353 | Industrial automation systems and integration -- Product data representation and exchange: Part 1 Overview and fundamental principles second revision | WC-Draft |
| 55 | PGD/19/24554 | Recommendations for Centralised Lubrication as Applied to Plant and Machinery : Part 1 Oil Lubrication | WC-Draft |
| 56 | PGD/19/27781 | Specification of Volume Grease Pumps | Project-Approval |
| 57 | PGD/21/24682 | Meteorology -- Raingauges, Recording -- Specification | Finalization |
| 58 | PGD/21/27409 | Windsocks -- Specification | P-Draft |
| 59 | PGD/22/26377 | Wire Wound Sliding Contact Rheostats for Use in Educational Institutions -- Specification | WC-Draft |
| 60 | PGD/23/24524 | Movements for Wristwatch -- Dimensions | WC-Draft |
| 61 | PGD/23/25144 | Horology -- Watch straps -- Specification: Part 1 Leather straps (first revision) | P-Draft |
| 62 | PGD/23/25145 | Horology -- Watch straps -- Specification: Part 2 Metal straps (first revision) | P-Draft |
| 63 | PGD/23/25146 | Watch cases and accessories -- Ion coating by physical vapour deposition (PVD) -- Specification | P-Draft |
| 64 | PGD/23/25147 | Watch dials and dial feet -- Specification | P-Draft |
| 65 | PGD/23/25150 | Time-measuring instruments -- Photoluminescent deposits -- Test methods and requirements | Under Published |
| 66 | PGD/25/25479 | Gauges -- Thread Pitch Gauges for ISO Metric Screw Threads (Pitch Range 0.4 To 6 mm) -- Specification (Second Revision ) | WC-Draft |
| 67 | PGD/25/26360 | Cast Iron Box Angle Plates Specification (first revision) | WC-Draft |
| 68 | PGD/25/26370 | Angle Gauge Blocks -- Specification (first revision) | WC-Draft |
| 69 | PGD/25/27770 | Radius gauges -- Specification first revision | P-Draft |
| 70 | PGD/25/27771 | Method of calibration for gauge block comparator | P-Draft |
| 71 | PGD/25/27783 | Geometrical product specifications (GPS) -- Filtration: Part 21 Linear profile filters -- Gaussian filters (first revision) | WC-Draft |
| 72 | PGD/25/27784 | Geometrical product specifications GPS -- Filtration Part 31 Robust profile filters -- Gaussian regression filters (first revision) | WC-Draft |
| 73 | PGD/25/27785 | Geometrical Product Specifications (GPS) -- Dimensional Measuring Equipment: Part 2 Design and metrological characteristics of calliper depth gauges (first revision) | WC-Draft |
| 74 | PGD/25/27788 | Specification for internal micrometers (Including Stick Micrometers) Amendment - 1 | WC-Draft |
| 75 | PGD/26/23722 | LEGAL METROLOGY GAS VOLUME METERS DIAPHRAGM GAS METERS | WC-Draft |
| 76 | PGD/26/24427 | Thermal Mass Flow Based Gas Meters -- Specification | Under Published |
| 77 | PGD/26/25508 | Revised State of the Art of Metric System in India (An update to the SP4 : 1969 Metric change in India) | Under Published |
| 78 | PGD/26/25928 | Commercial weights -- Specification (fourth revision) | Under Published |
| 79 | PGD/26/25939 | Commercial carat weights -- Specification (fourth revision) | Under Published |
| 80 | PGD/26/27245 | Specification For Counter Machines First revision | P-Draft |
| 81 | PGD/26/27246 | Accuracy Requirements for Volumetric Container Filling Machines Used in Petroleum Trade First revision | P-Draft |
| 82 | PGD/27/25996 | General Purpose Carabiners for Mountaineering Specification | P-Draft |
| 83 | PGD/27/25997 | Mountaineering Helmets Specification | P-Draft |
| 84 | PGD/27/26036 | Adjustable Crampons For Mountaineering Specification First Revision | P-Draft |
| 85 | PGD/27/26037 | Mountaineering Harness Specification | P-Draft |
| 86 | PGD/27/26039 | Crampons Mountaineering Non-Adjustable Specification First Revision | P-Draft |
| 87 | PGD/28/26101 | CARTRIDGES FOR SHOTGUNS - SPECIFICATION (PART 3 EMPTY CASE) (First Revision) | Under Published |
| 88 | PGD/28/27863 | Bomb Disposal Systems Performance Evaluation and Requirements | P-Draft |
| 89 | PGD/32/23095 | Tool shanks with 7 by 24 taper for automatic tool changers: Part 3 Retention knobs of forms AD, AF, UD, UF, JD and JF (first revision) | F-Draft |
| 90 | PGD/32/23217 | Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole -- Dimensions (second revision) | Under Published |
| 91 | PGD/32/23663 | Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole -- Dimensions (second revision) | Under Published |
| 92 | PGD/32/27808 | Face and shoulder milling cutters with indexable inserts -- Dimensions | WC-Draft |
| 93 | PGD/33/27175 | Steel Roller Chains, Types S and C, Attachments and Sprockets | F-Draft |
| 94 | PGD/33/27258 | Cycle Chains Specification | Under Published |
| 95 | PGD/33/28145 | Fatigue Test Method for Transmission Precision Roller Chains and Leaf Chains | WC-Draft |
| 96 | PGD/34/26361 | Pliers and nippers Engineers and Linemans pliers Dimensions and test values | WC-Draft |
| 97 | PGD/34/26362 | Pliers and nippers Multiple slip joint pliers Dimensions and test values | WC-Draft |
| 98 | PGD/34/26363 | Pliers and nippers Slip joint pliers Dimensions and test values | WC-Draft |
| 99 | PGD/34/27768 | CHAIN PIPE WRENCHES - SPECIFICATION (second revision) Amendment - 1 | WC-Draft |
| 100 | PGD/34/27814 | Single-Ended Open-Jaw Adjustable Wrenches Specification | WC-Draft |
| 101 | PGD/34/27815 | Assembly Tools for Screws and Nuts Hexagon Socket Screw Keys | WC-Draft |
| 102 | PGD/34/28044 | Open Jaw Wrenches Spanners Specification | WC-Draft |
| 103 | PGD/34/28046 | RING WRENCHES SPANNERS SPECIFICATION | WC-Draft |
| 104 | PGD/36/18526 | Equal Cross Body for Oil Hydraulic Couplings — Specification Part 2 Made from Bar Stocks | F-Draft |
| 105 | PGD/36/21665 | Hydraulic fluid power cylinders — Dimensions and tolerances of housings for elastomer energized, plastic-faced seals Part 2: Rod seal housings | F-Draft |
| 106 | PGD/36/23666 | Fluid power systems and components — Vocabulary (third revision) | F-Draft |
| 107 | PGD/36/24560 | Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections (first revision) | Finalization |
| 108 | PGD/35/26984 | Specification for circlips: Part 1 for shafts | P-Draft |
| 109 | PGD/35/26985 | Specification for circlips: Part 2 for bores | P-Draft |
| 110 | PGD/35/26986 | Specification for circlips: Part 3 type e for shafts | P-Draft |
| 111 | PGD/35/27170 | Machine Tools Safety Electro-Discharge Machines | WC-Draft |
| 112 | PGD/35/27173 | Test Conditions for Vertical Internal Type Broaching Machines Testing of Accuracy | Under Published |
| 113 | PGD/37/18737 | Pipe nuts — Specification (Third Revision) | Under Published |
| 114 | PGD/37/18747 | TINMENS RIVETS - SPECIFICATION [First Revision of IS 866 ] | WC-Draft |
| 115 | PGD/37/19646 | Slotted and Castle Nuts Specification | WC-Draft |
| 116 | PGD/37/21517 | Multi-Tooth Lock Washers Specification | Finalization |
| 117 | PGD/37/21518 | Taper Washers for Channels ISMC - Specification | WC-Draft |
| 118 | PGD/37/21519 | Square Washers for Wood Fastenings - Specification | WC-Draft |
| 119 | PGD/37/21520 | Round Washers with Square Hole for Wood Fastenings - Specification | P-Draft |
| 120 | PGD/37/21521 | Taper Washers for I-Beams ISMB - Specification | WC-Draft |
| 121 | PGD/37/21682 | Technical Supply Conditions for Threaded Steel Fasteners Part 7 Mechanical Properties and Test Methods for Nuts Without Specified Proof Loads Third Revision | P-Draft |
| 122 | PGD/37/22056 | Fasteners Heat treated tapping screws Mechanical and physical properties | WC-Draft |
| 123 | PGD/37/22675 | High Strength Structural Bolts — Specification (third revision) | Finalization |
| 124 | PGD/37/22676 | Hardened and tempered washers for high strength structural bolts and nuts — Specification (second revision) | F-Draft |
| 125 | PGD/37/22736 | Fasteners Mechanical Properties of Corrosion-Resistant Stainless Steel Fasteners : Part 6 General Rules for The Selection of Stainless Steels and Nickel Alloys for Fasteners | Project-Approval |
| 126 | PGD/37/22766 | Fasteners Terminology Part 2 Vocabulary and Definitions for Coatings | Finalization |
| 127 | PGD/37/22772 | Fasteners — Terminology: Part 4 Control Inspection, Delivery, Acceptance and Quality | F-Draft |
| 128 | PGD/37/22813 | Hexagon head bolts, screws and nuts of product grades A and B: Part 3 Hexagon nuts, style 1 (Size range M5 To M39) (sixth revision) | Under Published |
| 129 | PGD/37/24265 | Technical supply condition for threaded steel fasteners: Part 12 Phosphate coatings on threaded fasteners (second revision) | WC-Draft |
| 130 | PGD/37/24946 | Centre Holes — Dimensions ( Second Revision ) | P-Draft |
| 131 | PGD/37/25812 | Weld Nuts — Specification: Part 1 Hexagon nuts (second revision) | Under Published |
| 132 | PGD/37/26129 | Slotted Raised Countersunk Head Wood Screw | WC-Draft |
| 133 | PGD/37/26130 | Slotted Round Head Wood Screw | WC-Draft |
| 134 | PGD/37/26131 | Slotted Countersunk Head Wood Screw | WC-Draft |
| 135 | PGD/37/26457 | Coach Bolts Specification first revision | Project-Approval |
| 136 | PGD/37/26458 | Thumb screws Specification Second Revision | Project-Approval |
| 137 | PGD/37/26459 | Fasteners Solid Drilled Tubular And Semi-Tubular Rivets Specification First Revision | Project-Approval |
| 138 | PGD/37/26641 | ISO general purpose inch screw threads: Part 1 Basic profile | Project-Approval |
| 139 | PGD/37/26642 | ISO general purpose inch screw threads: Part 2 General plan | Project-Approval |
| 140 | PGD/37/26643 | ISO general purpose inch screw threads: Part 3 Basic dimensions | Project-Approval |
| 141 | PGD/37/26644 | ISO general purpose inch screw threads: Part 4 Allowances and tolerances | Project-Approval |
| 142 | PGD/37/27125 | Industrial Staples — Specification | P-Draft |
| 143 | PGD/37/27338 | Self-Tapping Screws — Specification (first revision) | Under Published |
| 144 | PGD/37/27339 | Drywall screws — Specification (first revision) | Under Published |
| 145 | PGD/37/27470 | Hexagon nuts with flange, style 2 — Specification (second revision) | WC-Draft |
| 146 | PGD/37/27614 | Chipboard screws — Specification (first revision) | Under Published |
| 147 | PGD/37/27667 | Hexagon socket head cap screws with metric fine pitch thread | Project-Approval |
| 148 | PGD/37/28340 | Grooved Pins Full-Length Parallel Grooved With Chamfer Specification second revision | Project-Approval |
| 149 | PGD/37/28351 | Grooved Pins Full-Length Taper Grooved Specification third revision | Project-Approval |
| 150 | PGD/38/24487 | Metal closures for drums -- Specification (second revision) | WC-Draft |
| 151 | PGD/38/24488 | Steel drums (galvanized and ungalvanized) -- Specification (fourth revision) | WC-Draft |
| 152 | PGD/38/24489 | Bitumen drums -- Specification (fourth revision) | WC-Draft |
| 153 | PGD/38/25148 | Tinplate conical pails and cylindrical drums -- Specification | P-Draft |
| 154 | PGD/38/27272 | Square tins -- 15 kg/litre for ghee, vanaspati, edible oils and bakery shortenings -- Specification (second revision) -- Amendment No. 1 | WC-Draft |
| 155 | PGD/38/27406 | Round easy open ends for foods and beverages -- Specification | WC-Draft |
| 156 | PGD/38/27809 | Aluminium cans for beverages -- Specification (first revision) -- Amendment 1 | WC-Draft |
| 157 | PGD/38/27810 | Stainless steel feeding bottle for infants -- Specification -- Amendment 1 | WC-Draft |
| 158 | PGD/38/27811 | Three piece round open top metal cans for foods and beverages -- Specification -- Amendment 1 | WC-Draft |
| 159 | PGD/38/27812 | Round paint tins -- Specification (third revision) | WC-Draft |
| 160 | PGD/39/22109 | Optics and optical instruments -- Geodetic and surveying instruments -- Vocabulary | F-Draft |
| 161 | PGD/39/22120 | Lasers and laser-related equipment -- Test methods for laser beam widths divergence angles and beam propagation ratios Part 2 General astigmatic beams | F-Draft |
| 162 | PGD/39/24213 | Glossary of terms used in optical technology | Finalization |
| 163 | PGD/39/27592 | Procedure for basic climatic and durability tests for optical instruments: Part 15 drop test | P-Draft |
| 164 | PGD/39/27593 | Procedure for basic climatic and durability tests for optical instruments part 16 solar radiation test | P-Draft |
| 165 | PGD/41/24204 | Landing mats used in gymnastics - Specification | P-Draft |
| 166 | PGD/41/26040 | Horses and bucks used in gymnastics -- Specification | WC-Draft |
| 167 | PGD/41/26042 | Uneven bars used in gymnastics -- Specifications | WC-Draft |
| 168 | PGD/41/26043 | Table tennis table -- Specification | P-Draft |
| 169 | PGD/41/26045 | Vaulting boxes -- Specification | P-Draft |
| 170 | PGD/41/26046 | Parallel bars used in gymnastics -- Specification | WC-Draft |
| 171 | PGD/41/26047 | Basketball Frames -- Specification | P-Draft |
| 172 | PGD/41/26953 | Head Protectors for Cricketers -- Specifications | P-Draft |
| 173 | PGD/40/23605 | Conveyor Belts — Fire Resistant Conveyor Belting for Underground Mines and Such other Hazardous Applications — Specification | Under Published |
| 174 | PGD/40/23667 | Conveyor and Elevator Textile Belting — Specification Part 5 Fire Resistant Belting for Surface Application ( First Revision ) | Under Published |
| 175 | PGD/40/27122 | Conveyor Belts — Test Atmospheres and Conditioning Periods | WC-Draft |