Hand-Operated Universal Gearless Pulling and Lifting Machines Specification Second Revision
24-01-2025
53.020
2.
MED 16(26961)
STEEL CYLINDERS FOR COMPRESSED GASES CODE OF PRACTICE PART 6 LIQUEFIED CHLORINE GAS Second Revision of IS 8198 Part 6
21-12-2024
23.020.30
3.
MED 33(26933)
Spoons - Specification ( Amendment - 1)
15-12-2024
4.
MED 29(26922)
Household Sewing Machines Hand Attachment Assembly
12-01-2025
61.080
5.
MED 29(26888)
General Requirements for Light Duty Sewing Machine Heads for Industrial Use
05-01-2025
61.080
6.
MED 29(26779)
FEED LIFTING ROCK SHAFT FOR SEWING MACHINES FOR HOUSEHOLD PURPOSES SPECIFICATION
17-12-2024
61.080
7.
MED 29(26778)
CONNECTING RODS FOR SEWING MACHINES FOR HOUSEHOLD PURPOSES SPECIFICATION
17-12-2024
61.080
8.
MED 29(26777)
OSCILLATING ROCK SHAFTS FOR SEWING MACHINES FOR HOUSEHOLD PURPOSES SPECIFICATION
17-12-2024
61.080
9.
MED 23(26699)
Instantaneous Domestic Water Heater for Use with LPG - Specification (Amendment No- 1)
15-11-2024
10.
MED 25(26696)
GRAPHIC TECHNOLOGY SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS PART 5 MANUALLY FED STAND ALONE PLATEN PRESSES (Adoption of ISO 12643-5 )
08-12-2024
37.100.10
11.
MED 25(26695)
GRAPHIC TECHNOLOGY SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS PART 4 CONVERTING EQUIPMENT AND SYSTEMS First Revision of ISO 12643-4
08-12-2024
37.100.10
12.
MED 25(26694)
GRAPHIC TECHNOLOGY SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS PART 3 BINDING AND FINISHING EQUIPMENT AND SYSTEMS (First Revision of ISO 12643-3 )
08-12-2024
37.100.10
13.
MED 25(26693)
GRAPHIC TECHNOLOGY SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS PART 2 PREPRESS AND PRESS EQUIPMENT AND SYSTEMS (First Revision of ISO 12643-2)
08-12-2024
37.100.10
14.
MED 25(26692)
GRAPHIC TECHNOLOGY SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS PART 1 GENERAL REQUIREMENTS (First Revision of ISO 12643-1)
08-12-2024
37.100.10
15.
MED 20(26676)
TAPERS FOR AGRICULTURAL PUMPING SYSTEMS SPECIFICATION
09-11-2024
43.060.40
16.
MED 33(26630)
Wrought and Cast Aluminium Utensils — Specification ( Second Revision ) Amendment - 1
27-10-2024
17.
MED 6(26566)
Prevention and Safety Against Fire in Ropeways - Code of Practice Amendment - 1
18-10-2024
18.
MED 6(26565)
Pulsated movement monocable ropeways with fixed grips - Code of practice Amendment - 2
18-10-2024
19.
MED 6(26525)
Continuous movement monocable ropeways with fixed grips - Code of practice (Second Revision) Amendment - 1
18-10-2024
20.
MED 3(26474)
Closed-Circuit Ammonia Refrigeration System - Code of Practice for Design and Installation (ANSI/IIAR 2 : 2014, NEQ) Amendment - 1
19-10-2024
21.
MED 17(26471)
Butterfly Valves for General Purposes ( First Revision ) Amendment - 2
19-10-2024
22.
MED 27(26469)
Handpump cum Solar Pumping System - Specifications Amendment - 2
02-11-2024
23.
MED 3(26463)
BOTTLE COOLERS SPECIFICATION Fourth Revision
19-11-2024
97.130.20
24.
MED 3(26440)
AIR FILTERS FOR GENERAL VENTILATION PART 2 MEASUREMENT OF FRACTIONAL EFFICIENCY AND AIRFLOW RESISTANCE First Revision
19-10-2024
91.140.30
25.
MED 1(26387)
METHOD OF CALCULATION OF EFFICIENCY OF PACKAGED BOILERS (First Revision of IS 13979 )
20-10-2024
23.020.30; 27.060.30
26.
MED 23(26169)
DOMESTIC GAS STOVES AND BUILT IN HOB FOR USE WITH PNG SPECIFICATION (First Revision of IS 17153)
N/A
75.160.30, 97.040.20
27.
MED 24(26168)
Ballistic Shields - Specification (Amendment - 1)
23-08-2024
28.
MED 23(26038)
DOMESTIC GAS STOVES WITH CERAMIC BURNER FOR USE WITH LIQUEFIED PETROLEUM GASES — SPECIFICATION
31-07-2024
75.160.30, 97.040.20
29.
MED 24(26023)
CONSTRUCTION OF VAULT STRONG ROOM CODE OF PRACTICE (Second Revision of IS 15369)
31-07-2024
13.310
30.
MED 23(25833)
DOMESTIC GAS STOVES AND BUILT IN HOB FOR USE WITH LPG — SPECIFICATION ( Sixth Revision of IS 4246 )
12-07-2024
75.160.30, 97.040.20
31.
MED 6(25758)
Glossary of Terms Used in Connection with Aerial Ropeways and Cableways
01-09-2024
93.110
32.
MED 17(25636)
MARKING SYSTEM FOR VALVES (First Revision )
26-09-2024
23.060.01
33.
MED 18(25609)
Road construction and maintenance equipment - Slipform pavers - Definitions and commercial specifications Amendment - 1
20-06-2024
34.
MED 16(25227)
COMPRESSED GASEOUS HYDROGEN CGH2 AND HYDROGENNATURAL GAS BLENDS VALVE INTEGRATED WITH SOLENOID OPERATION REMOTELY CONTROLLED FOR AUTOMOTIVE USE - SPECIFICATION
07-09-2024
23.020.35; 23.060.40; 43.060.40; 75.060
35.
MED 30(25135)
POLYTETRAFLUOROETHYLENE PTFE GASKET MATERIALS First Revision
03-05-2024
21.140; 83.080.20; 83.140.50
36.
MED 21(25065)
CONSTRUCTION AND TESTING OF TUBEWELLS CODE OF PRACTICE
19-04-2024
65.060.35; 73.100
37.
MED 4(25025)
Concentrated solar thermal - Specification Part 5 Test methods Amendment - 2
N/A
38.
MED 14(24686)
CRANES REQUIREMENTS FOR TEST LOADS
10-03-2024
53.020.20
39.
MED 7(24667)
EARTH-MOVING MACHINERY OPERATOR ENCLOSURE ENVIRONMENT PART 5 WINDSCREEN DEFROSTING SYSTEM TEST METHOD Adoption of ISO 10263-5
19-04-2024
53.100
40.
MED 7(24665)
EARTH-MOVING MACHINERY OPERATOR ENCLOSURE ENVIRONMENT PART 1 TERMS AND DEFINITIONS (Adoption of ISO 10263-1)
19-04-2024
53.100
41.
MED 16(24593)
CYLINDERS FOR ON-BOARD STORAGE OF COMPRESSED GASEOUS HYDROGEN AND HYDROGEN BLENDS AS A FUEL FOR AUTOMOTIVE VEHICLES SPECIFICATION First revision of IS 16735
06-04-2024
23.020.30, 43.060.40
42.
MED 14(24553)
FORGED SHACKLES FOR GENERAL LIFTING PURPOSES DEE SHACKLES AND BOW SHACKLES First Revision
11-03-2024
53.020.30
43.
MED 16(24459)
GAS CYLINDERS REFILLABLE WELDED ALUMINIUM ALLOY CYLINDERS DESIGN CONSTRUCTION AND TESTING Amendment - 1
06-04-2024
44.
MED 29(24190)
INDUSTRIAL SEWING MACHINES LIGHT DUTY STAND SPECIFICATION First Revision of IS 14477
20-01-2024
61.080
45.
MED 16(23485)
WELDED LOW CARBON STEEL CYLINDERS FOR LOW PRESSURE LIQUEFIABLE GASES NOT EXCEEDING 5 LITRE WATER CAPACITY SPECIFICATION Second Revision of IS 7142
06-04-2024
23.020.35
46.
MED 16(23088)
LOW PRESSURE REGULATORS FOR USE WITH LIQUEFIED PETROLEUM GAS LPG SPECIFICATION Third Revision of IS 9798
06-04-2024
ICS 23.060.40; 75.160.30
47.
MED 8(22862)
TUNGSTEN CARBIDE FOR MINING TOOLS - SPECIFICATION
09-09-2023
73.100
48.
MED 16(22407)
Gas Cylinders-- Conditions for Filling Gas Cylinders ( First Revision ) Amendment - 1
28-11-2024
49.
MED 21(22232)
Tungsten Carbide Buttons and Inserts for Use in Down-The-Hole DTH Bits Specification
20-10-2024
25.080.40
50.
MED 7(21449)
BULK HANDLING EQUIPMENT CRAWLER TRACTORS DATA SHEET PART 2 INFORMATION TO BE SUPPLIED BY MANUFACTURERSUPPLIER Second Revision
02-02-2023
53.040.30
51.
MED 7(21447)
BULK HANDLING EQUIPMENT CRAWLER TRACTORS DATA SHEET PART 1 INFORMATION TO BE SUPPLIED BY PURCHASER Second Revision
02-02-2023
53.040.30
52.
MED 7(21445)
GENERAL REQUIREMENTS OF WAGON PULLERPUSHER First Revision
12-01-2023
45.060.20
53.
MED 7(21122)
BULK HANDLING EQUIPMENT SHIP LOADER RAIL MOUNTED DESIGN MANUFACTURE AND ERECTION CODE OF PRACTICE
17-12-2022
53.040; 53.080
54.
MED 7(21121)
BULK HANDLING EQUIPMENT WAGON MARSHALLING EQUIPMENT ENDLESS ROPE TYPE DATA SHEET
17-12-2022
53.020.01
55.
MED 30(21047)
Insulation Mill Board Specification
19-11-2022
29.035
56.
MED 7(20952)
BULK HANDLING EQUIPMENT BAG STACKER CUM LOADER PORTABLE DESIGN AND CONSTRUCTION GENERAL REQUIREMENTS First Revision of IS 14704
17-11-2022
53.040.10
57.
MED 8(20644)
ROOF BARS USED IN MINES SPECIFICATION
05-12-2022
73.100.01
58.
MED 8(20643)
KEPS FOR MINE CAGES SPECIFICATION
05-12-2022
73.100.01
59.
MED 8(20462)
GENERAL REQUIREMENTS FOR RIDERS FOR BUCKETS USED IN SHAFT SINKING OPERATIONS IN MINES
11-11-2022
73.100.01
60.
MED 7(19316)
DATA SHEET FOR DESIGN SELECTION OF VACUUM PRODUCER
17-12-2022
ICS 53.040
61.
MED 7(19315)
GLOSSARY OF TERMS FOR BULK HANDLING EQUIPMENT PART 2 STACKING LOADING AND RECLAIMING EQUIPMENT
17-12-2022
ICS 53.040
62.
MED 7(19314)
GLOSSARY OF TERMS FOR BULK HANDLING EQUIPMENT PART 6 CYCLIC LOOSE BULK HANDLING EQUIPMENT NON STATIONARY
17-12-2022
ICS 53.040
63.
MED 29(19261)
Household sewing machines Needle bar link studs- Specification Second Revision
03-06-2022
61.080
64.
MED 29(19245)
Industrial Bag Stitching Machine Specification Second Revision
30-05-2022
61.080
65.
MED 30(19159)
GASKETS AND PACKINGS GLAND PACKINGS ASBESTOS SPECIFICATION Third Revision
20-05-2022
21.140
66.
MED 29(19156)
Glossary of Terms Relating to Sewing Machines for Household Purposes
20-04-2022
61.080
67.
MED 21(19131)
External Upset Drill Pipe Assemblies For Use In Water Well Drilling Specification Part 1 Screwed On Joints Drill Pipe
10-04-2022
23.040.70
68.
MED 16(17305)
Refillable seamless steel gas cylinders - Specification: Part 1 normalized steel cylinders (Fourth Revision) Amendment - 2
05-07-2021
69.
MED 16(15993)
Draft Indian Standard LPG EQUIPMENT AND ACCESSORIES DESIGN SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS LPG COMBO VALVES AND FITTINGS TO BE USED IN CYLINDERS WITH WATER CAPACITY MORE THAN 150 L
19-07-2021
23.060.40; 23.020.30
70.
MED 16(15992)
Draft Indian Standard GAS CYLINDERS WELDED LOW CARBON STEEL CONTAINERS EXCEEDING 250 LITRES AND UP TO 1000 LITRES WATER CAPACITY FOR THE TRANSPORT OF LPG DESIGN AND CONSTRUCTION