PETROLEUM AND ITS PRODUCTS METHODS OF TEST PART 6 DETERMINATION OF HEAT OF COMBUSTION OF LIQUID HYDROCARBON FUELS BY BOMB CALORIMETER
N/A
75.080
2.
PCD 25(26983)
AUTOMOTIVE GEAR AND AXLE LUBRICANTS MULTIPURPOSE EXTREME PRESSURE SPECIFICATION Third Revision of IS 1118
26-01-2025
75.100
3.
PCD 1(26949)
PETROLEUM AND ITS PRODUCTS TEST METHODS PART: 113 DETERMINATIONS OF TOTAL ACIDITY IN AVIATION TURBINE FUEL
21-01-2025
75.080
4.
PCD 1(26941)
PETROLEUM AND ITS PRODUCTS TEST METHODS PART 147 DETERMINATION OF POTENTIAL GUM IN MOTOR GASOLINES
13-01-2025
75.080
5.
PCD 25(26917)
LUBRICANTS LUBRICATING OIL FOR REFRIGERATION MACHINERY SPECIFICATION
12-01-2025
75.100; 27.200
6.
PCD 1(26902)
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS PART 119 DETERMINATION OF AROMATICS SPECIES AND TOTAL AROMATICS IN NAPHTHA GASOLINE AND GASOLINE POOL COMPONENTS BY GAS CHROMATOGRAPHY (First Revision)
07-01-2025
75.080
7.
PCD 1(26887)
PETROLEUM AND ITS PRODUCTS TEST METHODS PART 1 DETERMINATION OF BASE NUMBER OF PETROLEUM PRODUCTS SECTION 2 POTENTIOMETRIC TITRATION
INTERNAL COMBUSTION ENGINE CRANKCASE OILS FOR AUTOMOTIVE APPLICATION DIESEL AND GASOLINE SPECIFICATION
22-12-2024
75.100
11.
PCD 1(26807)
Petroleum and Related Products - Precision of Measurement Methods and Results Part 2 Interpretation and Application of Precision Data in Relation to Methods of Test Amendment - 1
N/A
12.
PCD 1(26806)
Petroleum and Related Products - Precision of Measurement Methods and Results Part 1 Determination of Precision Data in Relation to Methods of Test Amendment - 1
N/A
13.
PCD 1(26801)
Methods of test for petroleum and its products [P : 44] determination of bromine number of distillates and aliphatic olefins - Electrometric method (Third Revision) Amendment - 1
N/A
14.
PCD 1(26787)
METHODS OF TEST FOR CRUDE PETROLEUM PETROLEUM AND RELATED PRODUCTS PART 167 DETERMINATION OF DENSITY LABORATORY DENSITY METER WITH AN OSCILLATING U-TUBE SENSOR
N/A
75.080
15.
PCD 1(26785)
Methods of test for petroleum and its products [P : 21] determination of flash point - Pensky - Martens closed cup method (Fourth Revision) Amendment - 1
21-01-2025
16.
PCD 1(26783)
Methods of test for petroleum and its products [ P : 32 ] crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary stoppered pyknometer and graduated bicapillary pyknometer methods (Third Revision) Amendment - 1
N/A
17.
PCD 3(26763)
PETROLEUM COKE SPECIFICATION
22-12-2024
75.160.20
18.
PCD 27(26740)
METHODS OF TEST POLYVINYL CHLORIDE RESINS First Revision
06-01-2025
83.080.20
19.
PCD 27(26739)
METHODS OF TEST POLYETHYLENE MOULDING MATERIALS AND COMPOUNDS First Revision
06-01-2025
83.080.20
20.
PCD 27(26738)
METHODS OF TEST AMINOPLASTIC MOULDING MATERIALS First Revision
06-01-2025
83.140.20
21.
PCD 27(26737)
METHODS OF TEST PHENOLIC MOULDING MATERIALS Second Revision
06-01-2025
83.080.10
22.
PCD 1(26673)
PETROLEUM AND ITS PRODUCTS METHODS OF TEST PART 4 SAMPLING OF PETROLEUM COKE FOR LABORATORY ANALYSIS Second Revision
PETROLEUM AND ITS PRODUCTS METHODS OF TEST PART 87 AUTOIGNITION TEMPERATURE OF LIQUID PETROLEUM PRODUCTS
12-11-2024
75.080
27.
PCD 13(26536)
Rubber Gasket for Pressure Cooker � Specification ( Second Revision ) Amendment - 1
13-10-2024
28.
PCD 1(26524)
PETROLEUM AND RELATED PRODUCTS PRECISION OF MEASUREMENT METHODS AND RESULTS PART 5 STATISTICAL ASSESSMENT OF AGREEMENT BETWEEN TWO DIFFERENT MEASUREMENT METHODS THAT CLAIM TO MEASURE THE SAME PROPERTY
12-11-2024
75.080
29.
PCD 1(26523)
PETROLEUM AND RELATED PRODUCTS PRECISION OF MEASUREMENT METHODS AND RESULTS PART 4: USE OF STATISTICAL CONTROL CHARTS TO VALIDATE IN-STATISTICAL-CONTROL STATUS FOR THE EXECUTION OF A STANDARD TEST METHOD IN A SINGLE LABORATORY
12-11-2024
75.080
30.
PCD 1(26522)
PETROLEUM AND RELATED PRODUCTS - PRECISION OF MEASUREMENT METHODS AND RESULTS - PART 3 MONITORING AND VERIFICATION OF PUBLISHED PRECISION DATA IN RELATION TO METHODS OF TEST
LIGHT MAGNESIUM OXIDE FOR RUBBER INDUSTRY SPECIFICATION
26-08-2024
71.060.20
38.
PCD 13(25998)
VINYL PYRIDINE LATEX SPECIFICATION
25-08-2024
83.040.10
39.
PCD 25(25990)
HYDRAULIC FLUID POWER FIRE-RESISTANT FLUIDS REQUIREMENTS AND GUIDELINES FOR USE
25-08-2024
75.120
40.
PCD 12(25983)
Plastics - Acrylonitrile-butadiene-styrene (abs) moulding and extrusion materials : Part 2 preparation of test specimens and determination of properties Amendment - 1
25-07-2024
41.
PCD 12(25982)
Plastics - Acrylonitrile-butadienestyrene (abs) moulding and extrusion materials : Part 1 designation system and specifications (First Revision) Amendment - 1
25-07-2024
42.
PCD 21(25951)
POLYETHYLENE BAGS FOR GENERAL PURPOSES SPECIFICATION
24-07-2024
55.080; 83.080.20
43.
PCD 18(25877)
DETERMINATION OF FATTY ACIDS IN NATURAL AND SYNTHETIC PERFUMERY MATERIALS BY GAS CHROMATOGRAPHY
19-07-2024
71.100.60
44.
PCD 12(25847)
FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS PART 2 PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
11-08-2024
83.080.20
45.
PCD 12(25844)
FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS PART 1 DESIGNATION SYSTEM
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 12 COMPRESSIVE VIBRATION NON-RESONANCE METHOD
27-07-2024
83.080.01
48.
PCD 27(25755)
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 11 GLASS TRANSITION TEMPERATURE
27-07-2024
83.080.01
49.
PCD 27(25754)
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 10 COMPLEX SHEAR VISCOSITY USING A PARALLEL-PLATE OSCILLATORY RHEOMETER
27-07-2024
83.080.01
50.
PCD 27(25753)
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 9 TENSILE VIBRATION SONIC-PULSE PROPAGATION METHOD
27-07-2024
83.080.01
51.
PCD 27(25752)
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 8 LONGITUDINAL AND SHEAR VIBRATION WAVE-PROPAGATION METHOD
27-07-2024
83.080.01
52.
PCD 27(25751)
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 7 TORSIONAL VIBRATION NON-RESONANCE METHOD
27-07-2024
83.080.01
53.
PCD 27(25750)
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 6 SHEAR VIBRATION NON-RESONANCE METHOD
27-07-2024
83.080.01
54.
PCD 27(25749)
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 5 FLEXURAL VIBRATION NON-RESONANCE METHOD
27-07-2024
83.080.01
55.
PCD 27(25748)
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 4 TENSILE VIBRATION NON-RESONANCE METHOD
27-07-2024
83.080.01
56.
PCD 27(25747)
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 3 FLEXURAL VIBRATION RESONANCE-CURVE METHOD
27-07-2024
83.080.01
57.
PCD 27(25746)
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 2 TORSION-PENDULUM METHOD
27-07-2024
83.080.01
58.
PCD 27(25745)
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 1 GENERAL PRINCIPLES
27-07-2024
83.080.01
59.
PCD 26(25691)
p-NITROTOLUENE TECHNICAL SPECIFICATION
16-07-2024
71.080.30
60.
PCD 3(25678)
Biogas Biomethane Specification
14-07-2024
75.060
61.
PCD 12(25653)
DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 8 CLASSIFICATION AND SPECIFICATIONS FOR ALTERNATIVE CORE LAMINATES
14-07-2024
83.140.20
62.
PCD 12(25652)
DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 7 CLASSIFICATION AND SPECIFICATIONS FOR DESIGN LAMINATES
14-07-2024
83.140.20
63.
PCD 12(25651)
DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 6 CLASSIFICATION AND SPECIFICATIONS FOR EXTERIOR-GRADE COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER
14-07-2024
83.140.20
64.
PCD 12(25650)
DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 5 CLASSIFICATION AND SPECIFICATIONS FOR FLOORING GRADE LAMINATES LESS THAN 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES
14-07-2024
83.140.20
65.
PCD 12(25649)
DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 4: CLASSIFICATION AND SPECIFICATIONS FOR COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER
14-07-2024
83.140.20
66.
PCD 12(25648)
DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 3: CLASSIFICATION AND SPECIFICATIONS FOR LAMINATES LESS THAN 2 MM THICK AND INTENDED FOR BONDING TO SUPPORTING SUBSTRATES
14-07-2024
83.140.20
67.
PCD 12(25647)
DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 2 DETERMINATION OF PROPERTIES
14-07-2024
83.140.20
68.
PCD 12(25646)
DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 1: INTRODUCTION AND GENERAL INFORMATION
14-07-2024
83.140.20
69.
PCD 7(25615)
Coal and Coke - Methods for determination of the chemical composition of ash Second Revision
12-07-2024
73.040, 75.160.10
70.
PCD 7(25597)
Coal and Coke Methods of Test Part 4 Ultimate Analysis Section 2 Determination of Nitrogen Second Revision
08-07-2024
73.040
71.
PCD 21(25596)
GLOSSARY OF TERMS IN PLASTICS AND FLEXIBLE PACKAGING EXCLUDING PAPER
08-07-2024
83.080; 55.040
72.
PCD 30(25546)
SAFETY OF TOYS PART 12: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES COMPARISON OF ISO 8124-1 EN 71-1 AND ASTM F963
02-07-2024
97.200.50
73.
PCD 26(25528)
1 3 DINITROBENZENE SPECIFICATION
01-07-2024
71.080.30
74.
PCD 27(25522)
PLASTICS METHODS OF TESTING PART 8 PERFORMANCECHEMICAL PROPERTIES SECTION XX DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC SLOW STRAIN RATE METHOD
01-07-2024
83.080.01
75.
PCD 27(25521)
PLASTICS METHODS OF TESTING PART 8 PERFORMANCECHEMICAL PROPERTIES SECTION XX DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC CONSTANT TENSILE DEFORMATION METHOD
01-07-2024
83.080.01
76.
PCD 27(25520)
PLASTICS METHODS OF TESTING PART 8 PERFORMANCECHEMICAL PROPERTIES SECTION XX DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC BALL OR PIN IMPRESSION METHOD
01-07-2024
83.080.01
77.
PCD 27(25518)
PLASTICS METHODS OF TESTING PART 8 PERFORMANCECHEMICAL PROPERTIES SECTION XX DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC GENERAL GUIDANCE
01-07-2024
83.080.01
78.
PCD 27(25517)
PLASTICS ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
01-07-2024
83.080.01
79.
PCD 27(25516)
MEASUREMENT OF ANTIBACTERIAL ACTIVITY ON PLASTICS AND OTHER NON-POROUS SURFACES
01-07-2024
83.080.01
80.
PCD 27(25515)
PLASTICS METHODS OF EXPOSURE TO DETERMINE THE WAVELENGTH DEPENDENT DEGRADATION USING SPECTRALLY DISPERSED RADIATION
01-07-2024
83.080.01
81.
PCD 27(25514)
PLASTICS ASSESSMENT OF THE EFFECTIVENESS OF FUNGISTATIC COMPOUNDS IN PLASTICS FORMULATIONS
01-07-2024
83.080.01
82.
PCD 27(25513)
PLASTICS METHODS FOR MARINE EXPOSURE
01-07-2024
83.080.01
83.
PCD 27(25512)
PLASTICS SMALL ENCLOSURES FOR CONDITIONING AND TESTING USING AQUEOUS SOLUTIONS TO MAINTAIN THE HUMIDITY AT A CONSTANT VALUE
01-07-2024
83.200
84.
PCD 27(25511)
MEASUREMENT OF ANTIVIRAL ACTIVITY ON PLASTICS AND OTHER NON-POROUS SURFACES
01-07-2024
83.080.01
85.
PCD 27(25510)
PLASTICS METHODOLOGY FOR ASSESSING POLYMER PHOTOAGEING BY FTIR AND UVVISIBLE SPECTROSCOPY
01-07-2024
83.080.01
86.
PCD 26(25509)
o-Toluidine
01-07-2024
71.080.30
87.
PCD 1(25456)
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS PART 101 COLORIMETRIC DETERMINATION OF PHOSPHORUS IN LUBRICATING OILS
25-06-2024
75.100
88.
PCD 1(25415)
PETROLEUM PRODUCTS DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS RESEARCH METHOD Third Revision
24-06-2024
75.160.20
89.
PCD 1(25411)
PETROLEUM PRODUCTS DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS MOTOR METHOD Third Revision
24-06-2024
75.160.20
90.
PCD 25(25403)
PETROLEUM AND RELATED PRODUCTS REQUIREMENTS AND GUIDANCE FOR THE MAINTENANCE OF TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS
24-06-2024
75.120
91.
PCD 7(25223)
SOLID BIOFUELS SAMPLING
09-06-2024
27.190; 75.160.40
92.
PCD 7(25218)
Methods of test for Abrasive Properties of Coal and Associated Minerals Second Revision
09-06-2024
73.040
93.
PCD 25(25217)
GEAR LUBRICANTS FOR ENCLOSED INDUSTRIAL GEAR DRIVES SPECIFICATION
09-06-2024
75.100
94.
PCD 7(25212)
SOLID BIOFUELS DETERMINATION OF MINOR ELEMENTS
08-06-2024
75.160.40
95.
PCD 7(25211)
SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - Al Ca Fe Mg P K Si Na AND Ti
08-06-2024
75.160.40
96.
PCD 26(25191)
p-TOLUIDINE SPECIFICATION
07-06-2024
71.080.30
97.
PCD 9(25183)
Tables for Alcoholometry by Hydrometer Method (First Revision) Amendment - 2
04-06-2024
98.
PCD 25(25117)
GENERAL PURPOSE GREASE FOR DEFENCE APPLICATIONS SPECIFICATION
31-05-2024
75.100
99.
PCD 13(25112)
EBONITE SPECIFICATION
21-05-2024
83.080.10
100.
PCD 13(25111)
STYRENATED PHENOL SPECIFICATION
21-05-2024
71.080.90
101.
PCD 13(25110)
TITANIUM DIOXIDE ANATASE TYPE FOR RUBBER INDUSTRY SPECIFICATION
21-05-2024
71.060.20
102.
PCD 7(25098)
Solid Biofuels Determination of Moisture Content Part 1 Reference Method First Revision
20-05-2024
27.190; 75.160.40
103.
PCD 7(25097)
Solid Biofuels Determination of Volatile Matter First Revision
20-05-2024
27.190; 75.160.40
104.
PCD 7(25096)
Solid Biofuels Determination of Moisture Content Part 3 Moisture in General Analysis Sample First Revision
20-05-2024
27.190; 75.160.40
105.
PCD 7(25095)
Solid Biofuels Determination of Ash Content First Revision
20-05-2024
27.190; 75.160.40
106.
PCD 7(25094)
Methods of Test for Brown Coals and Lignites Part 6 Determination of True Relative Density and Apparent Relative Density First Revision
20-05-2024
73.040
107.
PCD 7(25093)
Method of test for Brown Coals and Lignites: Part 4 Determination of Yield of Benzene - Soluble Extract Semi - Automatic Method Third Revision
20-05-2024
73.040
108.
PCD 25(25088)
SPECIFICATION FOR SYNTHETIC GRINDING FLUID
19-05-2024
43.060.30; 75.100
109.
PCD 13(25081)
SULPHUR FOR RUBBER INDUSTRY SPECIFICATION
17-05-2024
71.060.10
110.
PCD 13(25080)
WHITING FOR RUBBER INDUSTRY SPECIFICATION
17-05-2024
71.060.50
111.
PCD 13(25079)
RED OXIDE OF IRON FOR RUBBER INDUSTRY SPECIFICATION
LUBRICANTS INDUSTRIAL OILS AND RELATED PRODUCTS CLASS L FAMILY H HYDRAULIC SYSTEMS SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HETG HEPG HEES AND HEPR
Amendment No. 2 to IS 9833 : 2018 List of colourants for use in plastics in contact with foodstuffs and pharmaceuticals (Second Revision)
15-04-2024
122.
PCD 12(24899)
Amndment No. 3 to IS 16738 : 2018 Positive list of constituents for polypropylene, polyethylene and their copolymers for its safe use in contact with foodstuffs and pharmaceuticals
15-04-2024
123.
PCD 12(24850)
PLASTICS SOIL BIODEGRADABLE MATERIALS FOR MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE REQUIREMENTS AND TEST METHODS REGARDING BIODEGRADATION ECOTOXICITY AND CONTROL OF CONSTITUENTS
Coal for Cement Manufacture Specification First Revision
23-01-2024
75.160.10
163.
PCD 7(24223)
Coal and Coke - Methods of Test Part 1 Proximate Analysis (Third Revision)
21-01-2024
73.040, 75.160.10
164.
PCD 26(24021)
N N-DIMETHYLANILINE SPECIFICATION
05-01-2024
71.080.30
165.
PCD 27(24011)
PLASTICS METHODS OF TESTING PART 1 INTRODUCTION
30-12-2023
83.080.01
166.
PCD 27(24010)
PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 9 DETERMINATION OF DENSITY OF SMOKE FROM THE BURNING OR DECOMPOSITION OF PLASTICS
30-12-2023
83.080.01
167.
PCD 27(24009)
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 14 DETERMINATION OF INDENTATION HARDNESS OF RIGID PLASTIC BY MEANS OF BARCOL IMPRESSER
30-12-2023
55.120
168.
PCD 26(23998)
15-DICHLOROANTHRAQUINONE TECHNICAL SPECIFICATION
30-12-2023
71.080.99
169.
PCD 26(23993)
1-CHLOROANTHRAQUINONE TECHNICAL SPECIFICATION
29-12-2023
71.080.99
170.
PCD 26(23961)
3-BROMOBENZANTHRONE TECHNICAL SPECIFICATION
25-12-2023
71.080.99
171.
PCD 26(23960)
QUINIZARIN TECHNICAL SPECIFICATION
25-12-2023
71.080.99
172.
PCD 21(23793)
PLASTIC BOTTLESCONTAINERS FOR PACKAGING OF NATURAL MINERAL WATER AND PACKAGED DRINKING WATER SPECIFICATION
16-06-2024
55.080,83.080.20
173.
PCD 1(23728)
PETROLEUM AND ITS PRODUCTS - TEST METHODS PART XXX DETERMINATION OF TOTAL VOLATILE SULPHUR IN GASEOUS HYDROCARBONS AND LIQUEFIED PETROLEUM GASES THROUGH ULTRAVIOLET FLUORESCENCE DETECTION
12-01-2025
75.080
174.
PCD 3(23723)
KEROSENE SPECIFICATION
08-12-2023
75.160.20
175.
PCD 26(23532)
2-NITROANILINE- SPECFICATION
05-12-2023
71.080.30
176.
PCD 19(23425)
AMENDMENT NO. 2 TO IS 8481 : 2020 OXIDATION HAIR DYES ( LIQUID / GEL / CREAM ) — SPECIFICATION (Fourth Revision)
29-10-2023
177.
PCD 6(23418)
METHOD OF TEST FOR DETERMINATION OF SPECIFIC GRAVITY OF BITUMINOUS MIXTURES
15-04-2024
75.140
178.
PCD 26(23416)
J-ACID TECHNICAL SPECIFICATION
05-11-2023
71.080.99
179.
PCD 26(23414)
NITRODIAZO ACID SPECIFICATION
28-10-2023
71.080.99
180.
PCD 19(23405)
COSMETICS MICROBIOLOGY EVALUATION OF THE ANTIMICROBIAL PROTECTION OF A COSMETIC PRODUCT
27-10-2023
71.100.70
181.
PCD 25(23378)
BIODEGRADABLE LUBRICATING GREASES SPECIFICATION
07-01-2025
75.100
182.
PCD 18(23369)
PHENYL ETHYL METHYL ETHER SPECIFICATION
24-10-2023
71.100.60
183.
PCD 18(23365)
OIL OF CITRONELLA JAVA SPECIFICATION
24-10-2023
71.100.60
184.
PCD 26(23311)
5-SULPHOANTHRANILIC ACID - SPECIFICATION
20-10-2023
71.080.99
185.
PCD 26(23298)
R SALT TECHNICAL SPECIFICATION
20-10-2023
71.080.99
186.
PCD 26(23295)
GAMMA ACID SPECIFICATION
17-10-2023
71.080.99
187.
PCD 3(23286)
Motor gasoline - Specification (Sixth Revision) Amendment - 5
19-04-2024
188.
PCD 26(23281)
METHODS OF SAMPLING AND TESTS FOR DYE INTERMEDIATES
16-10-2023
71.080.80
189.
PCD 21(23202)
POLYETHYLENE CONTAINERS FOR THE TRANSPORT OF MATERIALS SPECIFICATION
08-10-2023
55.120
190.
PCD 21(23123)
BLOW MOULDED POLYOLEFIN CONTAINERS SPECIFICATION PART 3 CLOSED HEAD CONTAINERS OVER 60 LITRES UPTO AND INCLUDING 250 LITRES CAPACITY
03-10-2023
55.120
191.
PCD 21(23122)
BLOW MOULDED POLYOLEFIN CONTAINERS SPECIFICATION PART 2 OVER 5 LITRES UPTO AND INCLUDING 60 LITRES CAPACITY
ALUMINIUM FOIL TAPES APPLICATION IN HVAC INDUSTRY AND WHITE GOODS SPECIFICATION
05-04-2024
83.180
194.
PCD 25(22800)
LUBRICANTS FOR SPARK-IGNITION AIR-COOLED GASOLINE ENGINES SPECIFICATION Part 2 Four-Stroke Spark-Ignition Air-Cooled Engines for Scooters Mopeds and Motorcycles
29-06-2024
75.100
195.
PCD 3(22730)
FUEL OILS - SPECIFICATION
22-08-2023
75.160.20
196.
PCD 21(22494)
POLYETHYLENE TEREPHATHALATE PET BOTTLES FOR PACKAGING OF EDIBLE OILS SPECIFICATION
10-02-2024
83.080.01
197.
PCD 1(22415)
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS Part - DETERMINATION OF FATTY ACID METHYL ESTERS IN BIODIESEL BLENDED AUTOMOTIVE DIESELPARAFFINIC DIESEL FUELS BY HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY - REFRACTIVE INDEX DETECTION
13-09-2024
75.080
198.
PCD 18(22269)
Oil of Lemongrass - Specification third revision
09-06-2023
71.100.60
199.
PCD 21(21921)
Polyethylene Terephthalate PET Containers for the Packaging of Solid and Semi-Solid Foods Including Vanaspati - Specification
16-02-2024
83.080.20
200.
PCD 18(21456)
COUMARIN - SPECIFICATION
24-10-2023
71.100.60
201.
PCD 21(21332)
PLASTIC CONTAINERS FOR PHARMACEUTICAL USE - SPECIFICATION PART 2 PARENTERAL AND OPHTHALMIC PREPARATIONS
31-01-2023
83.080.01
202.
PCD 21(21330)
POLYETHYLENE CONTAINERS FOR PHARMACEUTICAL USE - SPECIFICATION PART 1 OTHER THAN PARENTERAL AND OPHTHALMIC PREPARATIONS
31-01-2023
83.080.01
203.
PCD 21(21293)
METHODS OF TEST FOR ENVIRONMENTAL STRESS-CRACK RESISTANCE OF BLOW-MOULDED POLYETHYLENE CONTAINERS
28-01-2023
83.080
204.
PCD 18(21084)
OIL OF MENTHA ARVENSIS SPECIFICATION
20-12-2022
71.100.60
205.
PCD 26(20955)
Vinyl Sulphone ester of 2,5-dimethoxy aniline - Specification
17-12-2022
71.080.99
206.
PCD 19(20742)
Draft AMENDMENT NO. 1 OCTOBER 2022 TO IS 17117 : 2019 HAIR SHAMPOO FOR BABIES ― SPECIFICATION
28-10-2023
207.
PCD 12(20690)
CODE OF PRACTICE FOR THE APPLICATION OF ADHESIVES IN FOOTWEAR INDUSTRY
06-12-2022
83.180
208.
PCD 12(20689)
GUM GHATTI SPECIFICATION
06-12-2022
83.180
209.
PCD 12(20688)
DEXTRIN FOR ADHESIVE INDUSTRY SPECIFICATION
06-12-2022
83.180
210.
PCD 19(20109)
Cosmetics Sun Protection Test Methods-In vivo Determination of Sun Protection Factor SPF [ISO 24444:2019 MOD]
20-09-2022
71.100.70
211.
PCD 19(19573)
SPECIFICATION FOR LIPSALVE (First Revision)
16-07-2022
71.100.70
212.
PCD 19(19493)
SHOWER GEL BODY WASH SPECIFICATION
28-10-2023
71.100.70
213.
PCD 19(19479)
FACE AND BODY SCRUB - SPECIFICATION
28-10-2023
71.100.70
214.
PCD 19(19476)
FACE WASH - SPECIFICATION
28-10-2023
71.100.70
215.
PCD 19(19444)
AUTO-OXIDATION HAIR DYES/COLOURS ― SPECIFICATION
25-06-2022
71.100.70
216.
PCD 12(19386)
POLYALKYLENE TEREPHTHALATE PET AND PBT THEIR COPOLYMERS AND LIST OF CONSTITUENTS IN RAW MATERIALS AND END PRODUCTS FOR THEIR SAFE USE IN CONTACT WITH FOODSTUFFS AND PHARMACEUTICALS
20-05-2022
97.200.50
217.
PCD 19(17644)
CLASSIFICATION OF COSMETIC RAW MATERIALS AND ADJUNCTS - Part.2 List of Raw Materials Generally Not Recognized As Safe GNRAS And Restricted Ingredients For Use In Cosmetics
05-09-2021
71.100.70
218.
PCD 19(15513)
Skin Lotion Specification
N/A
71.100.70
219.
PCD 19(15096)
SUNSCREEN COSMETIC PRODUCTS SPECIFICATION
28-10-2023
71.100.70
220.
PCD 25(14904)
All weather antiwear hydraulic oils - Specification
24-12-2019
75.120
221.
PCD 18(14443)
DETERMINATION OF CHIRAL PURITY OF ESSENTIAL OILS BY GAS CHROMATOGRAPHY