Total Standards : 47
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS/IEC 60297 : Part 3 : Sec 101 : 2004/IEC 60297-3-101:2004 |
Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482.6 mm 19 in series Part 3-101: Subracks and associated plug-in units | 0 | ---- | Buy | |
| 2 | IS/IEC 60603 : Part 1 : 1991/60603-1 : 1991 |
Connectors for frequencies below 3 MHz for use with printed boards Part 1: Generic specification General requirements and guide for the preparation of detail specifications, with assessed quality | 0 | ---- | Buy | |
| 3 | IS 13984 : Part 2 : Sec 4 : 1995 |
Link and test connectors - Specificaiton: Part 2 socket for conventional wiring: Sec 4 six - Way socket link and test connector | 0 | Nov, 2025 | Buy | |
| 4 | IS/IEC 61076 : Part 4 : Sec 116 : 2015/61076-4-116 |
Connectors for electronic equipment Product requirements Part 4-116: Printed board connectors Detail specification for a high-speed two-part connector with integrated shielding function | 0 | Mar, 2025 | Buy | |
| 5 | IS 13984 : Part 4 : Sec 2 : 1995 |
LlNk and test connectors specification: Part 4 u - Link plug: Sec 2 u - Link non - Polarized | 0 | Jul, 2025 | Buy | |
| 6 | IS/IEC 61076 : Part 4 : Sec 110 : 2001/61076-4-110 |
Connectors for electronic equipment- Part 4-110: Printed board connectors with assessed quality Detail specification for latched cable connector system having a basic grid of 2.0 mm including full shielding and latching function | 0 | ---- | Buy | |
| 7 | IS/IEC 61076 : Part 4 : Sec 102 : 1997/61076-4-102 : 1997 |
Connectors with assessed quality for use in d.c., low-frequency analogue and in digital high speed data applications – Part 4: Printed board connectors – Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 | 0 | ---- | Buy | |
| 8 | IS/IEC 60603 : Part 3 : 1987/60603-3 :1987 |
Plastic Chairs for General Purposes - Specification ( First Revision ) | 1 | ---- | Buy | |
| 9 | IS 13984 : Part 1 : 1995 |
Link and Test Connectors:Part 1 Test Schedule and Requirements | 0 | Dec, 2025 | Buy | |
| 10 | IS/IEC 60297 : Part 3 : Sec 100 : 2008/60297-3-100:2008 |
Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482.6 mm 19 in series Part 3-100: Basic dimensions of front panels subracks chassis racks and cabinets | 0 | ---- | Buy | |
| 11 | IS 13984 : Part 3 : Sec 3 : 1995 |
Link and test connectors - Specificaiton: Part 3 socket for mounting on printed wiring boards: Sec 3 three - Way socket link and test connector | 0 | Oct, 2025 | Buy | |
| 12 | IS/IEC 60512 : Part 2 : Sec 2 : 2003/IEC 60512-2-2:2003 |
Connectors for Electronic Equipment � Tests and Measurements Part 2 Electrical Continuity and Contact Resistance Tests Section 2 Test 2b Contact Resistance Specified Test Current Method | 0 | ---- | Buy | |
| 13 | IS/QC 960201 : Part 4 : Sec 1 : 2005/IECQC 960201 : Part 4 : Sec 1 : 2005 |
Electromechanical switches for use in electronic equipment: Part 4: Secal specification for lever (Toggle) switches: Sec 1 blank detail specification | 0 | Jun, 2019 | Buy | |
| 14 | IS/IEC 60603 : Part 11 : 1992/60603-11:1992 |
Connectors for frequencies below 3 MHz for use with printed boards Part 11: Detail specification for concentric connectors dimensions for free connectors and fixed connectors | 0 | ---- | Buy | |
| 15 | IS/IEC 61076 : Part 4 : Sec 115 : 2003/61076-4-115 |
Connectors for electronic equipment Part 4-115: Printed board connectors Backplane connector for InfiniBand equipment | 0 | ---- | Buy | |
| 16 | IS/IEC 60603 : Part 5 : 1987/60603-5 |
Connectors for frequencies below 3 MHz for use with printed boards Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm (0.1 in) spacing | 0 | Feb, 2024 | Buy | |
| 17 | IS 13984 : Part 2 : Sec 3 : 1994 |
Link and test connectors - Specification: Part 2 socket for conventional wiring: Sec 3 four - Way socket link and test connector | 0 | Apr, 2025 | Buy | |
| 18 | IS/IEC 60603 : Part 12 : 1992/60603-12: 1992 |
Connectors for frequencies below 3 MHz for use with printed boards Part 12: Detail specification for dimensions general requirements and tests for a range of sockets designed for use with integrated circuits | 0 | ---- | Buy | |
| 19 | IS 13984 : Part 4 : Sec 1 : 1995 |
Ltnk and test connectors specification: Part 4 U - Link plug: Sec 1 U - Link polarized | 0 | Jun, 2025 | Buy | |
| 20 | IS/IEC 61076 : Part 4 : Sec 108 : 2002/61076-4-108 |
Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality -Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2.5 mm in accordance with IEC 60917-1 | 0 | ---- | Buy | |
| 21 | IS/IEC 61076 : Part 4 : Sec 100 : 2001/61076-4-100 : 2001 |
Connectors for electronic equipment Part 4-100: Printed board connectors with assessed quality Detail specification for two-part connector modules having a grid of 2.5 mm for printed boards and backplanes | 0 | ---- | Buy | |
| 22 | IS/IEC 61020 : Part 1 : 2019/61020-1-2019 |
Electromechanical switches for use in electrical and electronic equipment Part 1: Generic specification | 0 | ---- | Buy | |
| 23 | IS/IEC 60130 : Part 9 : 2011/60130-9 : 2011 |
Connectors for frequencies below 3 MHz Part 9: Circular connectors for radio and associated sound equipment | 0 | ---- | Buy | |
| 24 | IS 13984 : Part 3 : Sec 2 : 1995 |
Link and test connectors - Specificaiton: Part 3 socket for mounting on printed wiring boards: Sec 2 two - Way upright mounting socket link and test connector | 0 | Oct, 2025 | Buy | |
| 25 | IS/IEC 60512 : Part 3 : Sec 1 : 2002/IEC 60512-3-1: 2002 |
Connectors for Electronic Equipment Tests and Measurements Part 3 Insulation Tests Section 1 Test 3A: Insulation�Resistance | 0 | ---- | Buy | |
| 26 | IS 13984 : Part 5 : Sec 1 : 1995 |
Link and test connectors specification: Part 5 cord plug: Sec 1 polarized | 0 | Jun, 2025 | Buy | |
| 27 | IS/IEC 60603 : Part 8 : 1990/60603-8: 1990 |
Connectors for frequencies below 3 MHz for use with printed boards Part 8: Two-part connectors for printed boards for basic grid of 2.54 mm (0.1 in), with square male contacts of 0.63 mm x 0.63 mm | 0 | ---- | Buy | |
| 28 | IS/IEC 61076 : Part 4 : Sec 104 : 1999/61076-4-104 |
Connectors for use in d.c., low frequency analogue and digital high speed data applications – Part 4-104: Printed board connectors with assessed quality – Detail specification for two-part modular connectors, basic grid of 2.0 mm, with terminations on a multiple grid of 0.5 mm | 0 | ---- | Buy | |
| 29 | IS/IEC 60603 : Part 4 : 1987/60603-4 : 1987 |
Connectors for frequencies below 3 MHz for use with printed boards Part 4: Two-part connectors for printed boards having contacts spaced at 1.91 mm ( 0.075 in )centres and staggered terminations at that same spacing | 0 | Aug, 2025 | Buy | |
| 30 | IS 13984 : Part 2 : Sec 2 : 1994 |
Link and test connectors specification: Part 2 socket for conventiqnal wiring: Sec 2 three - Way socket link and test connector | 0 | Jul, 2025 | Buy | |
| 31 | IS/IEC 61076 : Part 4 : Sec 101 : 2001/61076-4-101 |
Connectors for electronic equipment Part 4-101: Printed board connectors with assessed quality Detail specification for two-part connector modules having a basic grid of 2.0 mm for printed boards and backplanes in accordance with IEC 60917 | 0 | Mar, 2024 | Buy | |
| 32 | IS 13984 : Part 3 : Sec 5 : 1995 |
Link and test connectors - Specificaiton: Part 3 socket for mounting on printed wiring boards: Sec 5 six - Way socket link and test connector | 0 | Nov, 2025 | Buy | |
| 33 | IS/IEC 61076 : Part 4 : Sec 107 : 2001/61076-4-107 |
Connectors for electronic equipment – Part 4-107: Printed board connectors with assessed quality – Detail specification for shielded two-part connectors having a basic grid of 2.0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations | 0 | ---- | Buy | |
| 34 | IS/IEC 60603 : Part 14 : 1998/60603-14 : 1998 |
Connectors for frequencies below 3 MHz for use with printed boards Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio video and audio-visual equipment | 0 | ---- | Buy | |
| 35 | IS/IEC 60915 : 2006/IEC 60915: 2006 |
Capacitors and resistors for use in electronic equipment Preferred dimensions of shaft ends bushes and for the mounting of single-hole bush-mounted shaft-operated electronic components | 0 | ---- | Buy | |
| 36 | IS/IEC 61076 : Part 1 : 2019/61076-1:2019 |
Connectors for electronic equipment Product requirements Part 1: Generic specification | 0 | ---- | Buy | |
| 37 | IS 13984 : Part 3 : Sec 1 : 1995 |
Link and test connectors - Specificaiton: Part 3 socket for mounting on printed wiring boards: Sec 1 two - Way flat mounting socket link and test connector | 0 | Oct, 2025 | Buy | |
| 38 | IS/IEC 60512 : Part 4 : Sec 1 : 2003/IEC 60512-4-1 : 2003 |
Connectors for electronic equipment - Part - 4 Tests and measurements - Section - 1: Voltage stress tests - Test 4a: Voltage proof | 0 | ---- | Buy | |
| 39 | IS 13984 : Part 4 : Sec 3 : 1995 |
LlNk and test connectors specification: Part 4 u - Link plug: Sec 3 double u - Link plug polarized | 0 | Jul, 2025 | Buy | |
| 40 | IS/IEC 61076 : Part 4 : Sec 113 : 2002/61076-113 : 2002 |
Connectors for electronic equipment – Printed board connectors – Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2.54 mm for printed boards and backplanes in bus applications | 0 | ---- | Buy | |
| 41 | IS/IEC 61076 : Part 4 : Sec 103 : 1999/61076-4-103 : 1999 |
Connectors for use in dc low-frequency analogue and digital high speed data applications Part 4-103: Printed board connectors with assessed quality Detail specification for two-part connectors with shielding and a basic grid of 2.5 mm | 0 | ---- | Buy | |
| 42 | IS/IEC 60603 : Part 6 : 1987/60603-6 : 1987 |
Connectors for frequencies below 3 MHz for use with printed boards Part 6: Edge-socket connectors and printed-board connectors with 2.54 mm (0.1 in) contact spacing for single or double-sided printed boards of 1.6 mm (0.063 in) nominal thickness | 0 | ---- | Buy | |
| 43 | IS 13984 : Part 2 : Sec 1 : 1994 |
Link and test connectors specification: part 2 socket for conventional wiring: Sec 1 two - Way socket link and test connector | 0 | Jun, 2025 | Buy | |
| 44 | IS/IEC 60603 : Part 2 : 1995/60603-2 : 1995 |
Connectors for frequencies below 3 MHz for use with printed boards – Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54 mm (0.1 in) with common mounting features | 0 | Mar, 2025 | Buy | |
| 45 | IS 13984 : Part 3 : Sec 4 : 1995 |
Link and test connectors - Specificaiton: Part 3 socket for mounting on printed wiring boards: Sec 4 four - Way socket link and test connector | 0 | Oct, 2025 | Buy | |
| 46 | IS/IEC 61076 : Part 4 : Sec 105 : 1995/61076-4-105 |
Connectors with assessed quality for use in dc low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry | 0 | ---- | Buy | |
| 47 | IS/IEC 60603 : Part 13 : 1995/60603-13 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality for printed boards for basic grid of 2.54 mm(0.1 in) with free connectors for non-accessible insulation displacement terminations (ID) | 0 | ---- | Buy |