Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
Total Standards : 87
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 |
IS 10203 : 2026 (First Revision) |
Thin-Walled Plain Bearings — Specification (First Revision) | 0 | ---- | Buy | |
| 2 |
IS 10260 (Part 1) : 2017 ISO 4378-1 ISO 4378-1 (First Revision) |
Plain bearings - Terms, definitions, classification and symbols: Part 1 design, bearing materials and their properties (First Revision) | 0 | ---- | Buy | |
| 3 |
IS 10260 (Part 4) : 2024 |
Plain Bearings � Terms, Definitions, Classification and Symbols Part 4 Basic Symbols | 0 | ---- | Buy | |
| 4 |
IS 10260 (Part 5) : 2024 |
Plain Bearings � Terms Definitions Classification and Symbols Part 5 Application of Symbols | 0 | ---- | Buy | |
| 5 |
IS 10260 (Part 3) : 2024 (Second Revision) |
Plain Bearings � Terms, Definitions, Classification and Symbols Part 3 Lubrication (Second Revision) | 0 | ---- | Buy | |
| 6 |
IS 10260 (Part 2) : 2024 (First Revision) |
Plain Bearings Terms Definitions Classification and Symbols Part 2 Friction and Wear Second revision | 0 | ---- | Buy | |
| 7 |
IS 10648 : 1983 Reaffirmed but not taken up for revision |
Code for identification of ring type needle bearings Including Sealed Bearings | 0 | ---- | Download | |
| 8 |
IS 11027 (Part 2) : 2018 ISO 1132-2 : 2001 ISO 1132-2 : 2001 |
Rolling Bearing - Tolerances Part 2 Meauring and Gauging Principles and Methods | 0 | ---- | Buy | |
| 9 |
IS 11027 (Part 1) : 2019 ISO 1132-1 : 2000 ISO 1132-1 : 2000 |
Rolling Bearing — Tolerances Part 1 Terms and Definitions ( First Revision ) | 0 | ---- | Buy | |
| 10 |
IS 11430 : 1985 |
Code of practice for the packaging of ball and roller bearings | 0 | ---- | Download | |
| 11 |
IS 11904 : 2023 (Second Revision) |
Rolling bearings Radial bearings with locating snap ring Dimensions geometrical product specifications GPS and tolerance values | 0 | ---- | Download | |
| 12 |
IS 12102 : 2026 (First Revision) |
Tapered Roller Bearings — Specification (First Revision) | 0 | ---- | Buy | |
| 13 |
IS/ISO 12297-2 : 2018 |
Rolling bearings Cylindrical rollers Part 2: Boundary Dimensions Geometrical Product Specifications GPS and Tolerance Values for Ceramic Rollers | 0 | ---- | Buy | |
| 14 |
IS/ISO 12297-1 : 2021 (First Revision) |
Rolling Bearings — Cylindrical Rollers Part 1 Boundary Dimensions, Geometrical Product Specifications (GPS) and Tolerance Values for Steel Rollers ( First Revision ) | 0 | ---- | Buy | |
| 15 |
IS 13405 : 2018 ISO 246 : 2007 ISO 246 : 2007 (Second Revision) |
Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions (Second Revision) | 0 | ---- | Buy | |
| 16 |
IS 13406 : 2024 (Second Revision) |
Rolling Bearings Radial Ball Bearings with Flanged Outer Ring Flange Dimensions (second revision) | 0 | ---- | Buy | |
| 17 |
IS 13962 : 2018 ISO 10317 : 2008 ISO 10317 : 2008 (First Revision) |
Rolling bearings - Tapered roller bearings - Designation system (First Revision) | 1 | ---- | Buy | |
| 18 |
IS 14347 : 2026 (First Revision) |
Rolling Bearings — Plummer Block Housings — Specification (First Revision) | 0 | ---- | Buy | |
| 19 |
IS 14478 : 2026 (First Revision) |
Plain bearings - Thick - Walled bushes, plain and flange type, full - Round (without any joint or slit) - Specification | 0 | ---- | Buy | |
| 20 |
IS 14802 (Part 2) : 2024 (Second Revision) |
Hardness Testing Of Bearing Metals — Plain Bearings Part 2 Solid Materials (Second Revision) | 0 | ---- | Buy | |
| 21 |
IS 14802 (Part 1) : 2024 (First Revision) |
Plain Bearings -- Hardness testing of bearing metals: Part 1 Multilayer bearings materials (first revision) | 0 | ---- | Buy | |
| 22 |
IS 14803 (Part 1) : 2022 ISO 13318-2:2007 ISO 13318-2:2007 (First Revision) |
Plain bearings Tolerances Part 1: Fits | 0 | ---- | Buy | |
| 23 |
IS 14803 (Part 2) : 2022 ISO/TS 10020: 2022 (First Revision) |
Plain bearings Tolerances Part 2: Tolerances on form and position and surface roughness for shafts and thrust collars | 0 | ---- | Buy | |
| 24 |
IS 15620 : 2019 ISO 4383 : 2012 ISO 4383 : 2012 (First Revision) |
Plain Bearings — Multilayer Materials for Thin-Walled Plain Bearing ( First Revision ) | 0 | ---- | Buy | |
| 25 |
IS 15624 : 2026 (First Revision) |
Thermoplastic Polymers for Plain Bearings — Classification and Designation ( First Revision ) | 0 | ---- | Buy | |
| 26 |
IS 15625 : 2022 (First Revision) |
Plain bearings Lubrication holes grooves and pockets Dimensions types designation and their application to bearing bushes | 0 | ---- | Download | |
| 27 |
IS 16298 : 2024 (First Revision) |
Plain Bearings — Requirements and Guidance on Backings for Thick-Walled Multilayer Bearings (First Revision) | 0 | ---- | Buy | |
| 28 |
IS 16478 (Part 3) : 2023 ISO/TR 22053:2021 ISO/TR 22053:2021 (First Revision) |
Plain bearings Metallic multilayer plain bearings Part 3 : Non-destructive penetrant testing | 0 | ---- | Buy | |
| 29 |
IS 16478 (Part 1) : 2024 (First Revision) |
Plain Bearings � Metallic Multilayer Plain Bearings Part 1 Non-Destructive Ultrasonic Testing of Bond of Thickness Greater than or Equal to 05 mm (first revision) | 0 | ---- | Buy | |
| 30 |
IS 16478 (Part 2) : 2024 (First Revision) |
Plain Bearings — Metallic Multilayer Plain Bearings Part 2 Destructive Testing of Bond for Bearing Metal Layer Thicknesses Greater than or Equal to 2 mm (First Revision) | 0 | ---- | Buy | |
| 31 |
IS 16605 (Part 2) : 2025 (First Revision) |
Rolling bearings -- Accessories: Part 2 Locknuts and locking devices -- Specification (first revision) | 0 | ---- | Buy | |
| 32 |
IS 16605 (Part 1) : 2026 (First Revision) |
Rolling Bearings — Accessories Part 1 Adapter Sleeve Assemblies and Withdrawal Sleeves — Specification (First Revision) | 0 | ---- | Buy | |
| 33 |
IS 16736 : 2020 ISO 3096 : 2018 ISO 3096 : 2018 (First Revision) |
Rolling Bearings — Needle Rollers — Boundary Dimensions, Geometrical Product Specifications ( GPS ) and Tolerance Values ( First Revision ) | 0 | ---- | Buy | |
| 34 |
IS 17126 : 2024 (First Revision) |
Plain Bearings — Tin Casting Alloys for Multilayer Plain Bearings (First Revision) | 0 | ---- | Buy | |
| 35 |
IS 17267 : 2026 (First Revision) |
Rolling Bearings — Method for calculating the modified reference rating life for universally loaded rolling bearings (First Revision) | 0 | ---- | Buy | |
| 36 |
IS 17276 : 2019 ISO 15243 : 2017 ISO 15243 : 2017 |
Rolling Bearings - Damage and Failures - Terms, Characteristics and Causes | 0 | ---- | Buy | |
| 37 |
IS 18379 (Part 1) : 2023 |
Rolling bearings Noise testing of rolling bearing greases Part 1: Basic principles testing assembly and test machine | 0 | ---- | Buy | |
| 38 |
IS 18392 : 2024 |
Rolling bearings Linear motion rolling bearings Vocabulary | 0 | ---- | Buy | |
| 39 |
IS 18761 : 2024 |
Rolling Bearings Symbols for Physical Quantities | 0 | ---- | Buy | |
| 40 |
IS 18920 (Part 3) : 2025 |
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings: Part 3 Evaluation of stability margin | 0 | ---- | Buy | |
| 41 |
IS 18920 (Part 2) : 2025 |
Mechanical Vibration Vibration of Rotating Machinery Equipped with Active Magnetic Bearings Part 2 Evaluation of Vibration | 0 | ---- | Buy | |
| 42 |
IS 18920 (Part 4) : 2025 |
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings: Part 4 Technical guidelines | 0 | ---- | Buy | |
| 43 |
IS 18920 (Part 1) : 2024 |
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings: Part 1 Vocabulary | 0 | ---- | Buy | |
| 44 |
IS 18920 (Part 5) : 2024 |
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings: Part 5 Touch-down bearings | 0 | ---- | Buy | |
| 45 |
IS 19382 : 2025 |
Rolling Bearings -- Taper Rolling Bearings -- Tapered Rollers -- Specification | 0 | ---- | Buy | |
| 46 |
IS 19579 : 2026 |
Rolling Bearings — Cast and Pressed Housings for Insert Bearings — Boundary Dimensions and Tolerances (ISO 3228 : 2013, MOD) | 0 | ---- | Buy | |
| 47 |
IS 19709 : 2026 |
Plain bearings — Sintered bushes — Dimensions and tolerances | 0 | ---- | Buy | |
| 48 |
IS 19713 : 2026 |
Plain bearings — Handling of plain bearings | 0 | ---- | Buy | |
| 49 |
IS 19730 : 2026 |
Reuse, Recycling and Disposal of Bearing Materials | 0 | ---- | Buy | |
| 50 |
IS 19732 (Part 1) : 2026 |
Rolling Bearings — Measuring Methods for Vibration Part 1 Fundamentals | 0 | ---- | Buy | |
| 51 |
IS 2399 : 2024 (Third Revision) |
Rolling Bearings - Vocabulary ( Third Revision ) | 0 | ---- | Buy | |
| 52 |
IS 2898 (Part 2) : 2026 (First Revision) |
Rolling Bearings Part 2 Ceramic Balls (ISO 3290-2 : 2014, MOD) (First Revision) | 0 | ---- | Buy | |
| 53 |
IS 2898 (Part 1) : 2026 (First Revision) |
Rolling Bearings Part 1 Steel Balls (ISO 3290-1 : 2014, MOD) (Third revision) | 0 | ---- | Buy | |
| 54 |
IS 3090 : 2026 (First Revision) |
Installation and Maintenance of Rolling Bearings — Code of Practice (First Revision) | 0 | ---- | Buy | |
| 55 |
IS 3823 : 2014 ISO 76 : 2006 ISO 76 : 2006 (Third Revision) |
Rolling bearings -- Static load ratings (Third Revision) | 0 | ---- | Buy | |
| 56 |
IS 3824 : 2014 ISO 281 : 2007 ISO 281 : 2007 (Third Revision) |
Rolling bearings -- Dynamic load ratings and rating life (Third Revision) | 0 | ---- | Buy | |
| 57 |
IS 3980 : 2026 (Second Revision) |
Sintered Bearings — Specification (Second Revision) | 0 | ---- | Buy | |
| 58 |
IS 4215 : 2026 (Second Revision) |
Needle Roller Bearings — Specification (Second Revision) | 0 | ---- | Buy | |
| 59 |
IS 4216 : 2025 (Second Revision) |
Cages for needle roller bearings -- Specification (Second revision) | 0 | ---- | Buy | |
| 60 |
IS 4217 : 2026 (Third Revision) |
Rolling bearings -- Needle rollers -- Specification (Third Revision) | 0 | ---- | Buy | |
| 61 |
IS 4757 (Part 6) : 2022 IEC TS 62257-7-1:2010 IEC TS 62257-7-1:2010 (Third Revision) |
Plain bearings Wrapped bushes Part 6: Checking the inside diameter | 0 | ---- | Buy | |
| 62 |
IS 4757 (Part 1) : 2020 |
Plain bearings -- Wrapped bushes: Part 1 Dimensions (Second Revision) | 0 | ---- | Buy | |
| 63 |
IS 4757 (Part 2) : 2020 ISO 3547-5 : 2007 ISO 3547-5 : 2007 |
Plain bearings -- Wrapped bushes: Part 2 Test data for outside and inside diameters (Second Revision) | 0 | ---- | Buy | |
| 64 |
IS 4757 (Part 3) : 2020 ISO 3547-3 : 2017 ISO 3547-3 : 2017 |
Plain bearings -- Wrapped bushes: Part 3 Lubrication holes, grooves and indentations (Second Revision) | 0 | ---- | Buy | |
| 65 |
IS 4757 (Part 4) : 2020 ISO 3547-4 : 2017 |
Plain bearings -- Wrapped bushes: Part 4 Materials (Second Revision) | 0 | ---- | Buy | |
| 66 |
IS 4757 (Part 5) : 2022 (Second Revision) |
Plain bearings -- Wrapped bushes: Part 5 Checking the outside diameter | 0 | ---- | Download | |
| 67 |
IS 4774 (Part 1) : 2023 ISO 10786 : 2011 ISO 10786 : 2011 (Second Revision) |
Plain bearings Thin-walled half bearings with or without flange Part 1: Tolerance design features and methods of test | 0 | ---- | Buy | |
| 68 |
IS 4774 (Part 2) : 2022 (Second Revision) |
Plain bearings Thin-walled half bearings with or without flange Part 2: Measurement of wall thickness and flange thickness Second Revision | 0 | ---- | Download | |
| 69 |
IS 4774 (Part 3) : 2022 IEC TS 62257-9-6:2019 IEC TS 62257-9-6:2019 |
Plain bearing Thin-walled half bearing with or without flange Part 3: Measurement of peripheral length | 0 | ---- | Buy | |
| 70 |
IS 5669 : 2019 ISO 15 : 2017 ISO 15 : 2017 (Second Revision) |
Rolling bearings -- Radial bearings -- Boundary dimensions, general plan (Second Revision) | 0 | ---- | Buy | |
| 71 |
IS 5692 : 2024 (Third Revision) |
Rolling Bearings — Radial Bearings — Geometrical Product Specifications (GPS) and Tolerance Values (Third Revision) | 0 | ---- | Buy | |
| 72 |
IS 5932 : 2019 ISO 104 ISO 104 (Second Revision) |
Rolling bearings -- Thrust bearings -- Boundary dimensions, general plan (Second Revision) | 0 | ---- | Buy | |
| 73 |
IS 5933 : 2024 (Fifth Revision) |
Rolling Bearings — Thrust Bearings — Geometrical Product Specifications (GPS) and Tolerance Values (Fifth Revision) | 0 | ---- | Buy | |
| 74 |
IS 5934 : 2026 (Third Revision) |
Rolling Bearings — Chamfer Dimensions — Geometrical Product Specification (GPS) and Values (Third Revision) | 0 | ---- | Buy | |
| 75 |
IS 5935 (Part 2) : 2019 ISO 5753-2 : 2010 ISO 5753-2 : 2010 |
Rolling bearings - Internal clearance: Part 2 axial internal clearance for four - Point - Contact ball bearings | 0 | ---- | Buy | |
| 76 |
IS 5935 (Part 1) : 2019 ISO 5753-1 : 2009 ISO 5753-1 : 2009 |
Rolling bearings -- Internal clearance: Part 1 Radial internal clearance for radial bearings (Second Revision) | 0 | ---- | Buy | |
| 77 |
IS 6454 (Part 1) : 2026 (First Revision) |
Radial spherical roller bearings Part 1 Single row with cylindrical or tapered bore — Specification (First Revision) | 0 | ---- | Buy | |
| 78 |
IS 6454 (Part 2) : 2026 (First Revision) |
Radial spherical roller bearings Part 2 Double row with cylindrical or tapered bore — Specification (First Revision) | 0 | ---- | Buy | |
| 79 |
IS 6455 : 2026 (Second Revision) |
Single Row Deep Groove Ball Bearings — Specification ( Second Revision ) | 0 | ---- | Buy | |
| 80 |
IS 6456 : 2026 (First Revision) |
Double Row Radial Ball Bearings — Specification (first revision) | 0 | ---- | Buy | |
| 81 |
IS 6457 : 2026 (Second Revision) |
Single Row Cylindrical Roller Bearings — Specification ( Second Revision ) | 0 | ---- | Buy | |
| 82 |
IS 6458 : 2026 (First Revision) |
Double Row Cylindrical Roller Bearings — Specification ( First revision ) | 0 | ---- | Buy | |
| 83 |
IS 7461 : 2024 (First Revision) |
Rolling Bearings — Tapered Roller Bearings — Boundary Dimensions and Series Designations (Fourth Revision) | 0 | ---- | Buy | |
| 84 |
IS 9202 : 2020 (First Revision) |
Rolling Bearings — Cylindrical Rollers — Specification ( First Revision ) | 0 | ---- | Buy | |
| 85 |
IS 9619 : 2026 (First Revision) |
Identification Code for Shell Type Needle Bearings (First Revision) | 0 | ---- | Buy | |
| 86 |
IS 9764 (Part 2) : 2022 ISO/IEC 11801-3 : 2021 (Second Revision) |
Plain bearings Pressed bimetallic half thrust washers Features and tolerances | 0 | ---- | Buy | |
| 87 |
IS 9764 (Part 1) : 2022 (Third Revision) |
Plain bearings Ring type thrust washers made from strip Dimensions and tolerances | 0 | ---- | Download |