Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
( Sub Group : Statistical quality control )
Total Standards : 80
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 10427 : Part 1 : 1982 |
Designs for industrial experimentation: Part 1 standard designs | 0 | ---- | Download | |
| 2 | IS 10427 : Part 2 : 2006 (1 Revision) |
Designs for industrial experimentation: Part 2 orthogonal arrays (First Revision) | 0 | ---- | Download | |
| 3 | IS 10645 : Part 2 : 2019/ISO 22514-2: 2017 (4 Revision) |
Statistical methods in process managenment capability and performace: Part 2 process capability and performance of time dependent process models (Fourth Revision) | 0 | ---- | Buy | |
| 4 | IS 10645 : Part 1 : 2016/ISO 22514-1: 2014 |
Statistical methods in process management - Capability and performance: Part 1 general principles and concepts (Third Revision) | 0 | ---- | Buy | |
| 5 | IS 10645 : Part 4 : 2019/ISO 22514-4: 2016 |
Statistical methods in process management - capability and performance: Part 4 process capability estimates and performance measures (Third Revision) | 0 | ---- | Buy | |
| 6 | IS/ISO 10993 : Part 13 : 2010/ISO 22514-8 :2014 |
Biological evaluation of medical devices Part 13 Identification and quantification of degradation products from polymeric medical devices | 0 | ---- | Buy | |
| 7 | IS/ISO 11843 : PART 1 : 1997/ISO 11843 : PART 1 : 1997 |
Capability of detection: Part 1 terms and definitions | 0 | ---- | Buy | |
| 8 | IS/ISO 11843 : PART 4 : 2003/ISO 11843-4: 2003 |
Capability of detection: Part 4 methodology for comparing the minimum detectable value with a given value | 0 | ---- | Buy | |
| 9 | IS/ISO 11843 : PART 3 : 2003/ISO 11843-3: 2003 |
Capability of detection: Part 3 methodology for determination of the critical value for the response variable when no calibration data are used | 0 | ---- | Buy | |
| 10 | IS/ISO 11843 (Part 2) : 2000/ISO 11843-2: 2000 |
Capability of detection: — Part 2 methodology in the linear calibration case Amendment - 1 | 1 | ---- | Buy | |
| 11 | IS/ISO 11843 : Part 5 : 2008/ISO 11843-5: 2008 |
Capability of detection: Part 5 methodology in the linear and non - Linear calibration cases | 1 | ---- | Buy | |
| 12 | IS 12347 : 1988 |
Analysis of means - A graphical procedure | 0 | ---- | Download | |
| 13 | IS 12348 : 1988 |
Use of probability papers | 0 | ---- | Download | |
| 14 | IS 14978 : 2002 |
New seven tools for quality management | 0 | ---- | Download | |
| 15 | IS 15202 : PART 2 : 2012/ISO 11462-2:2010 |
Guidelines for implementation of statistical process control (SPC): Part 2 catalogue of tools and techniques | 0 | ---- | Buy | |
| 16 | IS 15202 : Part 1 : 2002/ISO 11462-1:2001 |
Guidelines for implementation of statistical process control (Spc): Part 1 elements of SPC | 0 | ---- | Buy | |
| 17 | IS 15280 : 2003 |
Quality function deployment | 0 | ---- | Download | |
| 18 | IS 15371 : Part 1 : 2023/ISO 7870-2: 2023 (1 Revision) |
Geometrical product specifications (GPS) � Inspection by measurement of workpieces and measuring equipment: Part 1 Decision rules for verifying conformity or nonconformity with specifications (First Revision) | 0 | ---- | Buy | |
| 19 | IS 15393 : Part 5 : 2003/ISO 5725-5 1998 |
Accuracy (Trueness And Precision) of measurement methods and results: Part 5 alternative methods for the determination of the precision of a standard measurement method | 0 | ---- | Buy | |
| 20 | IS 15393 : Part 3 : 2003/ISO 5725-3: 1994 |
Accuracy (Trueness And Precision) of measurement methods and results: Part 3 intermediate measures of the precision of a standard measurement method | 0 | ---- | Buy | |
| 21 | IS 15393 (Part 6) : 2003/ISO 5725-6: 1994 |
Accuracy (Trueness And Precision) of measurement methods and results: Part 6 use in practice of accuracy values Amendment - 1 | 1 | ---- | Buy | |
| 22 | IS 15393 : Part 1 : 2003/ISO 5725-1: 1994 |
Accuracy (Trueness And Precision) of measurement methods and results: Part 1 general principles and definitions | 0 | ---- | Buy | |
| 23 | IS 15431 : 2003 |
Seven basic tools for quality management | 0 | ---- | Download | |
| 24 | IS 15436 : Part 1 : 2004/ISO 11648-1: 2003 |
Statistical aspects of sampling from bulk materials: Part 1 general principles | 0 | ---- | Buy | |
| 25 | IS 15436 : Part 2 : 2014/ISO 11648-2: 2001 |
Statistical aspects of sampling from bulk materials: Part 2 sampling of particulate materials | 0 | ---- | Buy | |
| 26 | IS 15550 : 2005 |
Failure mode effects analysis | 0 | ---- | Download | |
| 27 | IS 15564 : 2005 |
Benchmarking | 0 | ---- | Download | |
| 28 | IS 16042 : Part 2 : 2021/ISO 7870-9: 2020 |
Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 2: Karl Fischer method | 0 | ---- | Buy | |
| 29 | IS 16123 : Part 1 : 2013/ISO 13053-1:2011 |
Quantitative methods in process improvement - Six sigma: Part 1 the dmaic methodology | 0 | ---- | Buy | |
| 30 | IS 16123 : Part 2 : 2013/ISO 13053-2:2011 |
Quantitative methods in process improvement - Six sigma: Part 2 tools and techniques | 0 | ---- | Buy | |
| 31 | IS 16174 : 2014/ISO 10725: 2000 |
Acceptance sampling plans and procedures for the inspection of bulk materials | 0 | ---- | Buy | |
| 32 | IS 16177 : 2014/ISO 11095:1996 |
Linear calibration using reference materials | 0 | ---- | Buy | |
| 33 | IS 16181 : 2014/ISO 11453:1996 |
Statistical interpretation of data - Tests and confidence intervals relating to proportions | 0 | ---- | Buy | |
| 34 | IS/ISO 16269 : Part 6 : 2014/ISO 16269-6:2014 |
Statistical interpretation of data: Part 6 determination of statistical tolerance intervals | 0 | ---- | Buy | |
| 35 | IS/ISO 16269 : Part 7 : 2001/ISO 16269 : Part 7 : 2001 |
Statistical interpretation of data: Part 7 median - Estimation and confidence intervals | 0 | ---- | Buy | |
| 36 | IS/ISO 16269 : Part 4 : 2010/ISO 16269-4:2010 |
Statistical interpretation of data: Part 4 detection and treatment of outliers | 0 | ---- | Buy | |
| 37 | IS/ISO 16269 : Part 8 : 2004/ISO 16269 : Part 8 : 2004 |
Statistical interpretation of data: Part 8 determination of prediction intervals | 0 | ---- | Buy | |
| 38 | IS 16522 : 2016/ISO 16336:2014 |
Applications of statistical and related methods to new technology and product development process - Robust parameter design (RPD) | 0 | ---- | Buy | |
| 39 | IS 16550 : Part 2 : 2021/ISO/TR 11843-8:2021 |
Organically produced food products - Part 2, Animal based | 0 | ---- | Buy | |
| 40 | IS/ISO 16625 : 2013/ISO 11843-7: 2012 |
CRANES AND HOISTS SELECTION OF WIRE ROPES DRUMS AND SHEAVES | 0 | ---- | Buy | |
| 41 | IS 16716 : 2018 |
Robust Estimation for Location and Scale Parameters | 0 | ---- | Download | |
| 42 | IS 16779 : 2021/ISO/TR 11462-4:2022 (1 Revision) |
Tobacco and tobacco products - Determination of the width of the strands of cut tobacco | 0 | ---- | Buy | |
| 43 | IS 17482 : 2020 |
Drinking Water Supply Management System — Requirements for Piped Drinking Water Supply Service | 1 | ---- | Download | |
| 44 | IS/ISO/TR 18532 : 2009/ISO/TR 18532:2009 |
Guidance on the application of statistical methods to quality and to industrial standardization | 0 | ---- | Buy | |
| 45 | IS/ISO/IEC 19795 : Part 3 : 2007/ISO 22514-5 :2019 |
INFORMATION TECHNOLOGY BIOMETRIC PERFORMANCE TESTING AND REPORTING PART 3: MODALITY-SPECIFIC TESTING | 0 | ---- | Buy | |
| 46 | IS/ISO/IEC 19795 : Part 7 : 2011/ISO 22514-6 :2013 |
Information Technology - Biometric performance testing and reporting - part 7: Testing of on-card biometric comparison algorithms | 0 | ---- | Buy | |
| 47 | IS/ISO 21748 : 2017/ISO 21748:2017 (1 Revision) |
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation (First Revision) | 0 | ---- | Buy | |
| 48 | IS 2500 : Part 6 : 2014/ISO 2859-5:2005 |
Sampling procedures for inspection by attributes: Part 6 system of sequential sampling plans indexed by acceptance quality limit (AQL) for lot - By - Lot inspection | 0 | ---- | Buy | |
| 49 | IS 2500 : Part 4 : 2014/ISO 2859-3:2005 |
Sampling procedures for inspection by attributes: Part 4 skip - Lot sampling procedures | 0 | ---- | Buy | |
| 50 | IS 2500 : Part 1 : 2000/ISO 2859-1:1999 (3 Revision) |
Sampling procedures for inspection by attributes: Part 1 sampling schemes indexed by acceptance quality limit (AQL) for lot - By - Lot inspection (Third Revision) | 2 | ---- | Buy | |
| 51 | IS/ISO 28591 : 2017/ISO 28591 |
Sequential Sampling Plans by Attributes | 0 | ---- | Buy | |
| 52 | IS/ISO 28593 : 2017/ISO 28593 |
Acceptance Sampling Procedures by attributes — Accept Zero Sampling System Based on Credit Principle for Controlling Outgoing Quality | 0 | ---- | Buy | |
| 53 | IS/ISO 28640 : 2010/ISO 28640 : 2010 |
Random variate generation methods | 0 | ---- | Buy | |
| 54 | IS/ISO 28801 : 2011/ISO 28801 : 2011 |
Double Sampling Plans by Attributes with Minimal Sample Sizes, Indexed by Producer�s Risk Quality (PRQ) and Consumer�s Risk Quality (CRQ) | 0 | ---- | Buy | |
| 55 | IS/ISO 3951 : Part 4 : 2011/ISO 2011 |
Sampling procedures for inspection by variables: Part 4 procedures for assessment of declared quality levels | 0 | ---- | Buy | |
| 56 | IS/ISO 3951 : Part 3 : 2007/ISO 2007 |
Sampling procedures for inspection by variables: Part 3 double sampling schemes indexed by acceptance quality limit (AQL) for lot - By - Lot inspection | 0 | ---- | Buy | |
| 57 | IS/ISO 3951 : Part 2 : 2016/ISO 3951-2:2013 |
Sampling procedures for inspection by variables: Part 2 general specification for single sampling plans indexedby acceptance quality limit (AQL) for lot - By - Lot inspection of independent quality characteristics | 0 | ---- | Buy | |
| 58 | IS/ISO 3951 : Part 5 : 2006/ISO 2006 |
Sampling procedures for inspection by variables: Part 5 sequential sampling plans indexed by acceptance qualityLimit (AQL) for inspection by variables (Known Standard Deviation) | 0 | ---- | Buy | |
| 59 | IS/ISO 39511 : 2018/39511 |
Sequential Sampling Plans for Inspection by Variables for Percent Nonconforming ( Known Standard Deviation ) | 0 | ---- | Buy | |
| 60 | IS 397 : Part 8 : 2018/ISO 7870-8: 2018 |
Methods for Statistical Quality Control during Production Part 8 Charting Techniques for Short Runs and Small Mixed Batches | 0 | ---- | Buy | |
| 61 | IS 397 : Part 3 : 2019/ISO 7870-5 : 2014 (2 Revision) |
Methods for Statistical Quality Control during Production Part 3 Specialized Control Charts ( Second Revision ) | 0 | ---- | Buy | |
| 62 | IS 397 : Part 2 : 2003 (3 Revision) |
Method for statistical quality control during production: Part 2 control charts for attributes (Third Revision) | 0 | ---- | Download | |
| 63 | IS 397 : Part 1 : 2003 (2 Revision) |
Method for statistical quality control during production: Part 1 control charts for variables (Second Revision) | 0 | ---- | Download | |
| 64 | IS 4905 : 2015/ISO 24153: 2009 (1 Revision) |
Random sampling and randomization procedures (First Revision) | 0 | ---- | Buy | |
| 65 | IS 5508 : Part 19 : 2021/16337 |
Guide for fishing gear Part 19: 216 m 450 Mesh bottom fish trawl net first revision | 0 | ---- | Buy | |
| 66 | IS 6200 : Part 4 : 2008 (1 Revision) |
Statistical tests of significance: Part 4 non - Parametric tests (First Revision) | 0 | ---- | Download | |
| 67 | IS 6200 : Part 1 : 2018 (4 Revision) |
Statistical tests of significance: Part 1 normal, t - And f - Tests (Fourth Revision) | 0 | ---- | Download | |
| 68 | IS 6200 : Part 3 : 2003 (1 Revision) |
Statistical tests of significance: Part 3 tests for normality (Second Revision) | 0 | ---- | Download | |
| 69 | IS 6200 : Part 2 : 2004 (2 Revision) |
Statistical tests of significance: Part 2 X2 - Test (Second Revision) | 0 | ---- | Download | |
| 70 | IS/IEC 62037 : Part 1 : 2012/ISO 22514-7 :2021 |
Passive RF and microwave devices intermodulation level measurement Part 1 General requirements and measuring methods | 0 | ---- | Buy | |
| 71 | IS 7200 : Part 2 : 1975 |
Presentation of statistical data: Part 2 diagrammatic representation of data | 0 | ---- | Download | |
| 72 | IS 7200 : Part 1 : 2019 (3 Revision) |
Presentation of statistical data: Part 1 tabulation and summarization (Third Revision) | 0 | ---- | Download | |
| 73 | IS 7300 : 2003 (2 Revision) |
Methods of regression and correlation (Second Revision) | 0 | ---- | Download | |
| 74 | IS 7600 : 1975 |
Analysis of variance | 0 | ---- | Download | |
| 75 | IS 7920 : Part 3 : 2018/ISO 3534-3:2013 (3 Revision) |
Statistics - Vocabulary and symbols: Part 3 design of experiments (Third Revision) | 0 | ---- | Buy | |
| 76 | IS 7920 : Part 4 : 2016/ISO 3534-4:2013 |
Statistics - Vocabulary and symbols: Part 4 survey sampling | 0 | ---- | Buy | |
| 77 | IS 7920 : Part 2 : 2012/ISO 3534-2:2006 (3 Revision) |
Statistics - Vocabulary and symbols: Part 2 applied statistics (Third Revision) | 0 | ---- | Buy | |
| 78 | IS 7920 : Part 1 : 2012 (3 Revision) |
Statistical - Vocabulary and symbols: Part 1 general statistical terms and terms used in probability (Third Revision) | 0 | ---- | Download | |
| 79 | IS 9300 : Part 2 : 1989 (1 Revision) |
Statistical models for industrial applications: Part 2 continuous models (First Revision) | 2 | ---- | Download | |
| 80 | IS 9300 : Part 1 : 1979 |
Statistical models for industrial applications: Part 1 discrete models | 1 | ---- | Download |