Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
( Sub Sub Group : Machines Presses & Press Work )
Total Standards : 113
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 10068 : Part 1 : 2018 (1 Revision) |
Press Working Die Sets (Plain Type) — Specification Part 1 Centre Post Rectangular Die Sets ( First Revision ) | 0 | ---- | Download | |
| 2 | IS 10068 : Part 2 : 2018 (1 Revision) |
Press working die sets (Plain Type) - Specification: Part 2 centre post square die sets (First Revision) | 0 | Aug, 2024 | Download | |
| 3 | IS 10068 : Part 3 : 1990 |
Press working die sets - Plain type - Specification: Part 3 centre post round die sets | 0 | Apr, 2022 | Download | |
| 4 | IS 10068 : Part 4 : 1997 |
Press working die sets (Plain Type): Part 4 rear post rectangular die sets - Specification | 0 | Apr, 2022 | Download | |
| 5 | IS 10068 : Part 5 : 1996 |
Press working die sets (Plain Type): Part 5 rear post square die sets - Specification | 0 | Apr, 2022 | Download | |
| 6 | IS 10068 : Part 6 : 1996 |
Press working die sets (Plain Type): Part 6 rear post round die sets - Specification | 0 | Apr, 2022 | Download | |
| 7 | IS 10644 : 1983 |
Recommendation on preferred shut heights for mechanical presses | 1 | Mar, 2021 | Download | |
| 8 | IS 10650 : 1983 |
Specification for pressure pins | 1 | Mar, 2021 | Download | |
| 9 | IS 10731 : 2000 (1 Revision) |
Presses - Slide holes for locating the shanks - Dimensions (First Revision) | 0 | Mar, 2021 | Download | |
| 10 | IS 11344 : 1985 |
Dimen - Sions for sintered carbide pellets used in heading dies | 0 | Mar, 2021 | Download | |
| 11 | IS 11372 : 1985 |
Proforma for purchase specification and technical features for belt drop hammers | 1 | Mar, 2021 | Download | |
| 12 | IS 11443 : Part 1 : 2016 (2 Revision) |
Tools for pressing and moulding - Machined plates: Part 1 machined plates for press tools (Second Revision) | 0 | Sep, 2025 | Download | |
| 13 | IS 11443 : Part 2 : 2003 (1 Revision) |
Tools for pressing and moulding - Machined plates: Part 2 machined plates for moulds (First Revision) | 0 | Aug, 2024 | Download | |
| 14 | IS 11505 : 1986 |
Recommendations on terminology of hardmetal heading diesISO title : hardmetal heading dies - Terminology) | 0 | Mar, 2021 | Download | |
| 15 | IS 11524 : 1986 |
Specification for carbide mandrels for tube drawing dies | 0 | Mar, 2021 | Download | |
| 16 | IS 11684 : 1986 |
Test chart for spinning and planishing lathes | 0 | Mar, 2021 | Download | |
| 17 | IS 11742 : 1986 |
Test chart for die sets | 0 | Mar, 2021 | Download | |
| 18 | IS 12852 : 1989 |
Gap frame hydraulic presses up to 4000 KN - Recommendation on preferred capacities and dimensions | 1 | Mar, 2021 | Download | |
| 19 | IS 12984 : 1990 |
Proforma for puruchase specification for plate bending machines | 0 | Mar, 2021 | Download | |
| 20 | IS 13316 : 2023/ISO 20928 (1 Revision) |
WELDED AUSTENITIC STAINLESS-STEEL TUBES FOR HEAT EXCHANGERS FOR THE SUGAR INDUSTRY SPECIFICATION First Revision | 0 | ---- | Buy | |
| 21 | IS 13693 : 2023/ISO 11901-5 : 2021 (1 Revision) |
Determination of dehusked grains in rice by double staining method (First Revision of IS 13693) | 0 | ---- | Buy | |
| 22 | IS 14757 : 2000 |
RECOMMENDATIONS ON PREFERRED CAPACITIES AND DIMENSIONS FOR STRAIGHT-SIDED COLUMN TYPE AND FOUR PILLAR TYPE HYDRAULIC PRESSES | 0 | Mar, 2021 | Download | |
| 23 | IS 14758 : 2000 |
Forging machine tools - Glossary of terms | 0 | Mar, 2021 | Download | |
| 24 | IS 14872 : Part 1 : 2014/ISO 3408-1 : 2006 (1 Revision) |
Ball screws: Part 1 vocabulary and designation (First Revision) | 0 | Sep, 2024 | Buy | |
| 25 | IS 14872 : Part 3 : 2013/ISO 3408-3 : 2006 (1 Revision) |
Ball screws: Part 3 acceptance conditions and acceptance tests (First Revision) | 0 | May, 2023 | Buy | |
| 26 | IS 14877 : Part 1 : 2000 |
Hydraulic presses - Straight sided column/C - Frame type: Part 1 test chart for geometrical accuracy | 0 | Mar, 2021 | Download | |
| 27 | IS 14877 : Part 2 : 2002 |
Hydraulic presses - Straight sided column/C - Frame type: Part 2 test chart for technical (Performance) evaluation of presses and press brakes | 0 | Aug, 2024 | Download | |
| 28 | IS 14878 : 2000 |
Test chart for plate bending machines | 0 | Sep, 2025 | Download | |
| 29 | IS 15300 : 2016/ISO 8695:2010 (1 Revision) |
Tools for pressing - Punches - Nomenclature and terminology (First Revision) | 0 | Dec, 2021 | Buy | |
| 30 | IS 15318 : 2003 |
Open front mechanical power presses - Vocabulary | 0 | Aug, 2024 | Download | |
| 31 | IS 15424 : Part 1 : 2018/ISO 9182-1:2013 (1 Revision) |
Tools for Pressing - Guide Pillars - Part 1 Types (First Revision) | 0 | May, 2023 | Buy | |
| 32 | IS 15424 : Part 2 : 2018/ISO 9182-2:2013 (1 Revision) |
Tools for pressing - Guide pillars: Part 2 type A, straight pillars (First Revision) | 0 | May, 2023 | Buy | |
| 33 | IS 15448 : Part 1 : 2018/ISO 9448-1:2013 (1 Revision) |
Tools for pressing - Guide bushes: Part 1 forms (First Revision) | 0 | Aug, 2024 | Buy | |
| 34 | IS 15448 : Part 2 : 2017/ISO 9448-2 (1 Revision) |
Tools for pressing - Guide bushes: Part 2 form A, gliding bushes, plain, type 1 (First Revision) | 0 | Aug, 2024 | Buy | |
| 35 | IS 15448 : Part 3 : 2018/ISO 9448-3 (1 Revision) |
Tools for pressing - Guide bushes: Part 3 form B, ball cage bushes, plain, type 1 (First Revision) | 0 | Aug, 2024 | Buy | |
| 36 | IS 15448 : Part 4 : 2018/ISO 9448-4:1991 (1 Revision) |
Tools for pressing - Guide bushes: Part 4 form C, gliding bushes, headed, type 1 (First Revision) | 0 | Aug, 2024 | Buy | |
| 37 | IS 15448 : Part 5 : 2018/ISO 9448-5 (1 Revision) |
Tools for pressing - Guide bushes: Part 5 form D, ball cage bushes, headed, type 1 (First Revision) | 0 | Aug, 2024 | Buy | |
| 38 | IS 15448 : Part 6 : 2018/ISO 9448-6 (1 Revision) |
Tools for pressing - Guide bushes: Part 6 form E, gliding bushes, flanged, type 1 (First Revision) | 0 | May, 2023 | Buy | |
| 39 | IS 15448 : Part 7 : 2018/ISO 9448-7:2013 (1 Revision) |
Tools for pressing - Guide bushes: Part 7 form F, ball cage bushes, flanged, type 1 (First Revision) | 0 | May, 2023 | Buy | |
| 40 | IS 15448 : Part 8 : 2018/ISO 9448-8 (1 Revision) |
Tools for pressing - Guide bushes: Part 8 form G, gliding bushes, stepped, type 1 (First Revision) | 0 | May, 2023 | Buy | |
| 41 | IS 15448 : Part 9 : 2018/ISO 9448-9 (1 Revision) |
Tools for pressing - Guide bushes: Part 9 form B, ball cage bushes, plain, type 2 (First Revision) | 0 | May, 2023 | Buy | |
| 42 | IS 15448 : Part 10 : 2018/ISO 9448-10 (1 Revision) |
Tools for pressing - Guide bushes: Part 10 form E, gliding bushes, flanged, type 2 (First Revision) | 0 | May, 2023 | Buy | |
| 43 | IS 15448 : Part 11 : 2018/ISO 9448-11 (1 Revision) |
Tools for pressing - Guide bushes: Part 11 form F, ball cage bushes, flanged, type 2 (First Revision) | 0 | May, 2023 | Buy | |
| 44 | IS 15744 : 2007 |
Angular Deflection for "C" Frame Mechanical Presses — Specification | 0 | Aug, 2024 | Download | |
| 45 | IS 15746 : 2007 |
ANGULAR DEFLECTION FOR ‘C’ FRAME HYDRAULIC PRESSES - SPECIFICATION | 0 | Aug, 2024 | Download | |
| 46 | IS 15747 : 2007 |
Angular deflection for straight sided hydraulic presses - Specification | 0 | Aug, 2024 | Download | |
| 47 | IS 16727 : 2018/ISO 23480:2013 |
Tools for Pressing — Sliding Plates | 0 | May, 2023 | Buy | |
| 48 | IS 16793 : Part 1 : 2019/ISO 11900-1:2007 |
Tools for pressing - Ball - Lock punch retainers: Part 1 types A and B, rectangular and square for light duty | 0 | May, 2023 | Buy | |
| 49 | IS 16793 : Part 2 : 2019/ISO 11900-2:2008 |
Tools for pressing - Ball - Lock punch retainers: Part 2 types C and D, reduced for light duty | 0 | May, 2023 | Buy | |
| 50 | IS 16793 : Part 3 : 2018/ISO 11900-3:2004 |
Tools for pressing - Ball - Lock punch retainers: Part 3 type E, reduced for heavy duty | 0 | May, 2023 | Buy | |
| 51 | IS 16794 : Part 1 : 2019/ISO 10242-1:2011 |
Tools for pressing - Punch holder shanks: Part 1 type A | 0 | May, 2023 | Buy | |
| 52 | IS 16794 : Part 2 : 2019/ISO 10242-2:2008 |
Tools for pressing - Punch holder shanks: Part 2 type C | 0 | May, 2023 | Buy | |
| 53 | IS 16795 : 2018/ISO 11415:1997 |
Tools for pressing - Die sets | 0 | May, 2023 | Buy | |
| 54 | IS 16799 : 2018/ISO 8977:2003 |
Tools for pressing - Matrixes | 0 | May, 2023 | Buy | |
| 55 | IS 16800 : Part 1 : 2018/ISO 9183-1:2008 |
Tools for pressing - Wear plates for press dies: Part 1 type A | 0 | May, 2023 | Buy | |
| 56 | IS 16800 : Part 2 : 2018/ISO 9183-2:2008 |
Tools for pressing - Wear plates for press dies: Part 2 type B | 0 | ---- | Buy | |
| 57 | IS 16898 : Part 1 : 2023/ISO 10071-1 : 2008 |
Basic Principles for Graphical Symbols for Use on Equipment Part 1: Creation of Graphical Symbols for Registration | 0 | ---- | Buy | |
| 58 | IS 16924 : 2018/ISO 6751:2011 |
Tools for Moulding -Ejector Pins with Cylindrical Head | 0 | May, 2023 | Buy | |
| 59 | IS 16925 : 2018/ISO 8017 : 2007 |
Tools for Moulding - Guide Pillars, Straight and Shouldered, and Locating Guide Pillars, Shouldered | 0 | May, 2023 | Buy | |
| 60 | IS 16926 : 2018/ISO 8018:2007 |
Tools for Moulding -Guide Bushes, Headed, and Locating Guide Bushes, Headed | 0 | May, 2023 | Buy | |
| 61 | IS 16929 : 2018/ISO 8406 : 2008 |
Tools for Moulding - Mould Bases - Round Locating Elements and Spacers | 0 | May, 2023 | Buy | |
| 62 | IS 16930 : 2018/ISO 8693 : 2011 |
Tools for Moulding - Flat Ejector Pins | 0 | May, 2023 | Buy | |
| 63 | IS 16931 : 2018/ISO 8694 : 2011 |
Tools for Moulding - Shouldered Ejector Pins | 0 | May, 2023 | Buy | |
| 64 | IS 16932 : 2018/ISO 9449 : 2007 |
Tools for Moulding - Centring Sleeves | 0 | May, 2023 | Buy | |
| 65 | IS 16933 : 2018/ISO 10072:2004 |
Tools for Moulding - Sprue Bushes - Dimensions | 0 | May, 2023 | Buy | |
| 66 | IS 16934 : 2018/ISO 10073 : 2008 |
Tools for Moulding - Support Pillars | 0 | May, 2023 | Buy | |
| 67 | IS 16935 : Part 1 : 2018/ISO 10907-1:2008 |
Tools for Moulding - Locating Rings Part 1 Locating Rings for Mounting without Thermal Insulating Sheets in Small or Medium Moulds (Type A and B) | 0 | May, 2023 | Buy | |
| 68 | IS 16935 : Part 2 : 2018/ISO 10907-2 : 2007 |
Tools for Moulding - Locating Rings Part 2 Locating Rings for Mounting with Thermal Insulating Sheets in Small or Medium Moulds (Types C and D) | 0 | May, 2023 | Buy | |
| 69 | IS 17196 : 2023/ISO 21223 : 2019 (1 Revision) |
Routine analytical cigarette smoking machine - Additional test methods for machine verification | 0 | ---- | Buy | |
| 70 | IS 17219 : Part 1 : 2019/ISO 11901-1:2003 |
Tools for Pressing — Gas Springs Part 1 General Specifications | 0 | May, 2023 | Buy | |
| 71 | IS 17220 : 2019/ISO 11903:2008 |
Tools for Pressing — Guide Pillar Mountings | 0 | May, 2023 | Buy | |
| 72 | IS 17222 : 2019/ISO 15600:2000 |
Tools for Moulding — Thermal Insulating Sheets for Injection Moulds | 0 | May, 2023 | Buy | |
| 73 | IS 17223 : 2019/ISO 16366:2008 |
Tools for Pressing — L-Shaped Guides | 0 | May, 2023 | Buy | |
| 74 | IS 17224 : 2019/ISO 16367:2008 |
Tools for Pressing — Guide plates — U- and V-blocks | 0 | May, 2023 | Buy | |
| 75 | IS 17225 : 2019/ISO 16915:2003 |
Tools for Moulding — Sprue Pullers | 0 | May, 2023 | Buy | |
| 76 | IS 17226 : 2019/ISO 16916:2016 |
Tools for Moulding — Tool Specification Sheet for Injection Moulds | 0 | May, 2023 | Buy | |
| 77 | IS 17227 : 2019/ISO 18084:2011 |
Press Tools for Tablets — Punches and Dies | 0 | May, 2023 | Buy | |
| 78 | IS 17228 : 2019/ISO 24233:2008 |
Tools for Moulding — Tool Specification Sheet for Diecasting Dies | 0 | May, 2023 | Buy | |
| 79 | IS 17229 : 2019/ISO 28238:2010 |
Compression and Injection Moulds — Components for Gating Systems | 0 | May, 2023 | Buy | |
| 80 | IS 18192 : 2023/ISO 20929:2018 |
Apamarga Achyranthes aspera L Whole Plant for use in Traditional Medicine Specification | 0 | ---- | Buy | |
| 81 | IS 18224 : 2023/ISO 10069-1 : 2008 |
General standard for qualification and certification of welding inspection personnel | 0 | ---- | Buy | |
| 82 | IS 18263 : Part 1 : 2023/ISO 10071-2 : 2005 |
Ergonomic principles related to mental workload Part 1: General issues and concepts terms and definitions | 0 | ---- | Buy | |
| 83 | IS 2515 : 1978 (1 Revision) |
Test chart for guillotine shears (First Revision) | 0 | Mar, 2021 | Download | |
| 84 | IS 3025 : Part 10 : 2023/ISO 10069-2 : 2008 (2 Revision) |
Methods of Sampling and Test Physical and Chemical for Water and Wastewater Part 10 Turbidity Second Revision | 0 | ---- | Buy | |
| 85 | IS 3438 : 2023/ISO 23480 : 2013 (3 Revision) |
SILVERED GLASS MIRRORS FOR GENERAL PURPOSES � SPECIFICATION (Third revision) | 0 | ---- | Buy | |
| 86 | IS 4296 : Part 1 : 2016/ISO 6752 : 2008 (2 Revision) |
Tools for pressing: Part 1 round punches with 60 degrees conical head and straight shank (Second Revision) | 0 | Sep, 2025 | Buy | |
| 87 | IS 4296 : Part 3 : 2015/ISO 9181 : 2007 (2 Revision) |
Tools for pressing: Part 3 round punches with 60 degree conical head and reduced shank (Second Revision) | 0 | Jan, 2025 | Buy | |
| 88 | IS 4592 : 2002/ISO 6899 : 1984 (1 Revision) |
Acceptance conditions of open mechanical front power presses - Testing of accuracy (First Revision) | 0 | May, 2023 | Buy | |
| 89 | IS 4593 : 1968 |
Test chart for straight - Sided presses | 0 | Mar, 2021 | Download | |
| 90 | IS 4918 : 1981 (1 Revision) |
Specification for hard metal (Carbide) wire, bar and tube drawing dies (First Revision ] | 0 | Aug, 2024 | Download | |
| 91 | IS 5363 : 2017 (2 Revision) |
Micro-drills -- Specification (second revision) | 0 | ---- | Download | |
| 92 | IS 5446 : 2017 (2 Revision) |
Machine chucking reamers with parallel shanks -- Specification (second revision) | 0 | ---- | Download | |
| 93 | IS 5447 : 2017 (2 Revision) |
Machine chucking reamers with morse taper shank -- Specification (second revision) | 0 | ---- | Download | |
| 94 | IS/ISO 5609 : Part 1 : 2012/ISO 5609-1 : 2012 |
Tool holders for internal turning with cylindrical shank for indexable inserts: Part 1 Designation, styles, dimensions and calculation for corrections | 0 | ---- | Buy | |
| 95 | IS 6354 : 2017 (2 Revision) |
End mills with morse taper shank -- Specification (second revision) | 0 | ---- | Download | |
| 96 | IS 6652 : Part 1 : 1986 (1 Revision) |
Glossary of terms relating to metal forming machines and tools part 1 metal forming tools (First Revision) | 0 | Mar, 2021 | Download | |
| 97 | IS 6652 : Part 2 : 1986 (1 Revision) |
Glossary of terms relating to metal forming machines and tools: Part 2 metal forming machines relating to sheet metal (First Revision ) | 0 | Mar, 2021 | Download | |
| 98 | IS 6652 : Part 3 : 1986 (1 Revision) |
Glossary of terms relating to metal for - Ming machines and tools: Part 3 metal forming technology and operations relating to sheet metal ( first revision ) | 0 | Apr, 2022 | Download | |
| 99 | IS 7468 : 1974 |
Recommendation on preferred strokes for mechanical and hydraulic presses | 1 | Sep, 2025 | Download | |
| 100 | IS 7469 : 1974 |
Recommendation on preferred capacities for mechanical and hydraulic presses | 0 | Aug, 2024 | Download | |
| 101 | IS 7664 : 2005 (1 Revision) |
Guide pillar for press tool die sets - Specification (Second Revision) | 0 | Sep, 2025 | Download | |
| 102 | IS 7706 : 1975 |
Specification for bolster plates for gap frame presses without die cushion | 0 | Sep, 2025 | Download | |
| 103 | IS 7707 : 1975 |
Specification for bolster plates for gap frame presses with die cushion | 0 | Sep, 2025 | Download | |
| 104 | IS 8017 : 1988 (1 Revision) |
Specification for vitreous enamelled reflectors for use with illuminating device | 1 | Mar, 2025 | Download | |
| 105 | IS 8064 : 2002 (2 Revision) |
Method of designation of mechanical and hydraulic presses (Second Revision) | 0 | Aug, 2024 | Download | |
| 106 | IS 8127 : 2005 (2 Revision) |
Guide bushes for press tool die sets - Specification (Second Revision) | 0 | Sep, 2025 | Download | |
| 107 | IS 8711 : 2002 (1 Revision) |
Gap frame open front mechanical presses - Capacity ratings and dimensions (First Revision) | 0 | Aug, 2024 | Download | |
| 108 | IS 9266 : Part 1 : 2017 (1 Revision) |
Press working die sets (Boss Type) - Specification: Part 1 centre post rectangular die sets (First Revision) | 0 | Aug, 2024 | Download | |
| 109 | IS 9266 : Part 2 : 2019 (1 Revision) |
Press working die sets (Boss Type) - Specification: Part 2 centre post square die sets (First Revision) | 0 | ---- | Download | |
| 110 | IS 9266 : Part 3 : 2019 (1 Revision) |
Press working die sets (Boss Type) - Specification: Part 3 centre post round die sets (First Revision) | 0 | ---- | Download | |
| 111 | IS 9266 : Part 4 : 1990 |
Press working die sets (Boss Type) - Specieication: Part 4 centre post reverse rectangular die sets | 0 | Apr, 2022 | Download | |
| 112 | IS 9419 : 2017 (2 Revision) |
Pusher legs - Specification (Second Revision) | 0 | Jun, 2021 | Download | |
| 113 | IS 9888 : 1981 |
Dimensions for sintered pellets of hard metal (Carbide) for wire, bar and tube drawing dies | 0 | Aug, 2024 | Download |